From patchwork Thu Jan 14 18:54:05 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 364033 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 61E46C433E0 for ; Thu, 14 Jan 2021 18:55:50 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1909023B44 for ; Thu, 14 Jan 2021 18:55:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729211AbhANSzf (ORCPT ); Thu, 14 Jan 2021 13:55:35 -0500 Received: from mail-03.mail-europe.com ([91.134.188.129]:52418 "EHLO mail-03.mail-europe.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727629AbhANSze (ORCPT ); Thu, 14 Jan 2021 13:55:34 -0500 Date: Thu, 14 Jan 2021 18:54:05 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=connolly.tech; s=protonmail; t=1610650447; bh=hjqAAEZOw1ci6jFQB+qJAaGGBpAoymTcBiJVZ/cWwlA=; h=Date:To:From:Cc:Reply-To:Subject:In-Reply-To:References:From; b=GNOP9DL2zpoJVi6G1lB1DjEpo+22tpCGvuUGwlWABPqCCWqrwWqmHDwsjO0OjkxYq AUC0ezkWAQPus6T0yk9oyv5ZvNpCO4uMdQs4ddMiFfCXGGDnCgRYvDj8sRp8riRh2p ppBLsdODIqYCmSTSYpLoTon04cWwCLqzQq6xbxNE= To: caleb@connolly.tech, Andy Gross , Bjorn Andersson , Rob Herring , Kees Cook , Anton Vorontsov , Colin Cross , Tony Luck From: Caleb Connolly Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Reply-To: Caleb Connolly Subject: [PATCH v3 1/2] arm64: dts: sdm845: add oneplus6/6t devices Message-ID: <20210114185227.25265-2-caleb@connolly.tech> In-Reply-To: <20210114185227.25265-1-caleb@connolly.tech> References: <20210114185227.25265-1-caleb@connolly.tech> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add initial support for the OnePlus 6 (enchilada) and 6T (fajita) based on the sdm845-mtp DT with the following functionality: * Touch * Display * GPU * Wlan and Bluetooth * USB peripheral mode * Remoteproc Signed-off-by: Caleb Connolly --- Changes since v1 * Remove unused pinctrl nodes * Properly model touchscreen vio supply GPIO * Improve comments * Remove bq27541 battery as it doesn't work Changes since v2 * Specify clock frequency of touchscreen i2c * Remove tri-state-key nodes until a better solution can be found * Cleaned up pinctrl nodes * Remove unused regulators * Improve formatting * Address Bjorn's comments * Remove unused regulators --- arch/arm64/boot/dts/qcom/Makefile | 2 + .../boot/dts/qcom/sdm845-oneplus-common.dtsi | 621 ++++++++++++++++++ .../dts/qcom/sdm845-oneplus-enchilada.dts | 19 + .../boot/dts/qcom/sdm845-oneplus-fajita.dts | 23 + 4 files changed, 665 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts create mode 100644 arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 5113fac80b7a..19f18af3ecff 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -44,6 +44,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb +dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi new file mode 100644 index 000000000000..9efa38c9f1c2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -0,0 +1,621 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6(T) (enchilada / fajita) common device tree source + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include +#include +#include + +#include "sdm845.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" + +/delete-node/ &rmtfs_mem; + +/ { + + aliases { + hsuart0 = &uart6; + }; + + reserved-memory { + /* + * The rmtfs memory region in downstream is 'dynamically allocated' + * but given the same address every time. Hard code it as this address is + * where the modem firmware expects it to be. + */ + rmtfs_mem: memory@f5b01000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf5b01000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /* + * It seems like reserving the old rmtfs_mem region is also needed to prevent + * random crashes which are most likely modem related, more testing needed. + */ + removed_region: memory@88f00000 { + no-map; + reg = <0 0x88f00000 0 0x200000>; + }; + + ramoops: ramoops@ac300000 { + compatible = "ramoops"; + reg = <0 0xac300000 0 0x400000>; + record-size = <0x40000>; + console-size = <0x40000>; + ftrace-size = <0x40000>; + pmsg-size = <0x200000>; + devinfo-size = <0x1000>; + ecc-size = <16>; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + }; + + /* + * Apparently RPMh does not provide support for PM8998 S4 because it + * is always-on; model it as a fixed regulator. + */ + vreg_s4a_1p8: pm8998-smps4 { + compatible = "regulator-fixed"; + regulator-name = "vreg_s4a_1p8"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&vph_pwr>; + }; + + /* + * The touchscreen regulator seems to be controlled somehow by a gpio. + * Model it as a fixed regulator and keep it on. Without schematics we + * don't know how this is actually wired up... + */ + ts_1p8_supply: ts-1p8-regulator { + compatible = "regulator-fixed"; + regulator-name = "ts_1p8_supply"; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 88 0>; + enable-active-high; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + label = "Volume keys"; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&volume_down_gpio &volume_up_gpio>; + + vol-down { + label = "Volume down"; + linux,code = ; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + + vol-up { + label = "Volume up"; + linux,code = ; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; + }; +}; + +&apps_rsc { + pm8998-rpmh-regulators { + compatible = "qcom,pm8998-rpmh-regulators"; + qcom,pmic-id = "a"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + vdd-s5-supply = <&vph_pwr>; + vdd-s6-supply = <&vph_pwr>; + vdd-s7-supply = <&vph_pwr>; + vdd-s8-supply = <&vph_pwr>; + vdd-s9-supply = <&vph_pwr>; + vdd-s10-supply = <&vph_pwr>; + vdd-s11-supply = <&vph_pwr>; + vdd-s12-supply = <&vph_pwr>; + vdd-s13-supply = <&vph_pwr>; + vdd-l1-l27-supply = <&vreg_s7a_1p025>; + vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>; + vdd-l3-l11-supply = <&vreg_s7a_1p025>; + vdd-l4-l5-supply = <&vreg_s7a_1p025>; + vdd-l6-supply = <&vph_pwr>; + vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>; + vdd-l9-supply = <&vreg_bob>; + vdd-l10-l23-l25-supply = <&vreg_bob>; + vdd-l13-l19-l21-supply = <&vreg_bob>; + vdd-l16-l28-supply = <&vreg_bob>; + vdd-l18-l22-supply = <&vreg_bob>; + vdd-l20-l24-supply = <&vreg_bob>; + vdd-l26-supply = <&vreg_s3a_1p35>; + vin-lvs-1-2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: smps3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + + vreg_s5a_2p04: smps5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2040000>; + }; + + vreg_s7a_1p025: smps7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + + vdda_mipi_dsi0_pll: + vdda_qlink_lv: + vdda_ufs1_core: + vdda_usb1_ss_core: + vreg_l1a_0p875: ldo1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + }; + + vreg_l2a_1p2: ldo2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l5a_0p8: ldo5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vreg_l7a_1p8: ldo7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_1p8: + vreg_l12a_1p8: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vreg_l14a_1p88: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-always-on; + }; + + vreg_l17a_1p3: ldo17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + vreg_l20a_2p95: ldo20 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vreg_l24a_3p075: ldo24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + regulator-initial-mode = ; + }; + + vreg_l25a_3p3: ldo25 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; + }; + vdda_mipi_dsi0_1p2: + vdda_ufs1_1p2: + vreg_l26a_1p2: ldo26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + vreg_l28a_3p0: ldo28 { + regulator-min-microvolt = <2856000>; + regulator-max-microvolt = <3008000>; + regulator-initial-mode = ; + }; + }; + + pmi8998-rpmh-regulators { + compatible = "qcom,pmi8998-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + regulator-initial-mode = ; + regulator-allow-bypass; + }; + }; + + pm8005-rpmh-regulators { + compatible = "qcom,pm8005-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-s1-supply = <&vph_pwr>; + vdd-s2-supply = <&vph_pwr>; + vdd-s3-supply = <&vph_pwr>; + vdd-s4-supply = <&vph_pwr>; + + vreg_s3c_0p6: smps3 { + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + }; +}; + +&adsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/adsp.mbn"; +}; + +&cdsp_pas { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/cdsp.mbn"; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + #address-cells = <1>; + #size-cells = <0>; + + /* + * Both devices use different panels but all other properties + * are common. Compatible line is declared in device dts. + */ + display_panel: panel@0 { + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vddio-supply = <&vreg_l14a_1p88>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&panel_reset_pins &panel_te_pin &panel_esd_pin>; + + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +&gcc { + protected-clocks = , + , + , + , + ; +}; + +&gpu { + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sdm845/oneplus6/a630_zap.mbn"; + }; +}; + +&i2c12 { + status = "okay"; + clock-frequency = <400000>; + + synaptics-rmi4-i2c@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_default_pins>; + + vdd-supply = <&vreg_l28a_3p0>; + vio-supply = <&ts_1p8_supply>; + + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <200>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <144>; + syna,sensor-type = <1>; + syna,rezero-wait-ms = <200>; + }; + }; +}; + +&mdss { + status = "okay"; +}; + +&mdss_mdp { + status = "okay"; +}; + +/* Modem/wifi*/ +&mss_pil { + status = "okay"; + firmware-name = "qcom/sdm845/oneplus6/mba.mbn", "qcom/sdm845/oneplus6/modem.mbn"; +}; + +&pm8998_gpio { + volume_down_gpio: pm8998_gpio5 { + pinconf { + pins = "gpio5"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; + + volume_up_gpio: pm8998_gpio6 { + pinconf { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + qcom,drive-strength = <0>; + }; + }; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qup_i2c12_default { + mux { + pins = "gpio49", "gpio50"; + function = "qup12"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_i2c10_default { + pinconf { + pins = "gpio55", "gpio56"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart9_default { + pinconf-tx { + pins = "gpio4"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio5"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +// Prevent garbage data on bluetooth UART lines +&qup_uart6_default { + pinmux { + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + function = "qup6"; + }; + + cts { + pins = "gpio45"; + bias-pull-down; + }; + + rts-tx { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio48"; + bias-pull-up; + }; +}; + +&uart6 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + /* + * This path is relative to the qca/ + * subdir under lib/firmware. + */ + firmware-name = "oneplus6/crnv21.bin"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l20a_2p95>; + vcc-max-microamp = <600000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vdda_ufs1_core>; + vdda-pll-supply = <&vdda_ufs1_1p2>; +}; + +&usb_1 { + status = "okay"; + + /* + * disable USB3 clock requirement as the device only supports + * USB2. + */ + qcom,select-utmi-as-pipe-clk; +}; + +&usb_1_dwc3 { + /* + * We don't have the capability to switch modes yet. + */ + dr_mode = "peripheral"; + + /* fastest mode for USB 2 */ + maximum-speed = "high-speed"; + + /* Remove USB3 phy as it's unused on this device. */ + phys = <&usb_1_hsphy>; + phy-names = "usb2-phy"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vdda_usb1_ss_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + + qcom,imp-res-offset-value = <8>; + qcom,hstx-trim-value = ; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + tri_state_key_default: tri_state_key_default { + mux { + pins = "gpio40", "gpio42", "gpio26"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + ts_default_pins: ts-int { + mux { + pins = "gpio99", "gpio125"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + panel_reset_pins: panel-reset { + mux { + pins = "gpio6", "gpio25", "gpio26"; + function = "gpio"; + drive-strength = <8>; + bias-disable = <0>; + }; + }; + + panel_te_pin: panel-te { + mux { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-disable; + input-enable; + }; + }; + + panel_esd_pin: panel-esd { + mux { + pins = "gpio30"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + input-enable; + }; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>; + vdd-1.8-xo-supply = <&vreg_l7a_1p8>; + vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; + vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + + qcom,snoc-host-cap-8bit-quirk; +}; \ No newline at end of file diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts new file mode 100644 index 000000000000..72842c887617 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6 (enchilada) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6"; + compatible = "oneplus,enchilada", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,sofef00"; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts new file mode 100644 index 000000000000..969b36dc9e2c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -0,0 +1,23 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * SDM845 OnePlus 6T (fajita) device tree. + * + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + */ + +#include "sdm845-oneplus-common.dtsi" + +/ { + model = "OnePlus 6T"; + compatible = "oneplus,fajita", "qcom,sdm845"; +}; + +&display_panel { + status = "okay"; + + compatible = "samsung,s6e3fc2x01"; +}; + +&rmi4_f12 { + touchscreen-y-mm = <148>; +}; From patchwork Thu Jan 14 18:54:32 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 362982 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 16C14C433E9 for ; Thu, 14 Jan 2021 18:55:33 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id BF52B23B31 for ; Thu, 14 Jan 2021 18:55:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728926AbhANSzR (ORCPT ); Thu, 14 Jan 2021 13:55:17 -0500 Received: from mail2.protonmail.ch ([185.70.40.22]:35310 "EHLO mail2.protonmail.ch" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728777AbhANSzR (ORCPT ); Thu, 14 Jan 2021 13:55:17 -0500 Date: Thu, 14 Jan 2021 18:54:32 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=connolly.tech; s=protonmail; t=1610650474; bh=ZjEeyA413RNzpU9DT+FNrhe0K3Gvid9ETDUGt0k6xos=; h=Date:To:From:Cc:Reply-To:Subject:In-Reply-To:References:From; b=Fw0VtOj0lJAypnm4vm4cN5fCrZqUt2eGzGecGMmiI/h0FxOmZhZq1Tgf+qfuOTYxD YExL0Q2yft5OXPDYN6Y/vnVvJrUvzfK+wwa6NU2Uv33Hugz/8btUGhA/kPf5XWaO2q dYdfDaQ97DCFve6jUASRW9EBmhE2zfz4/DftD/sE= To: caleb@connolly.tech, Andy Gross , Bjorn Andersson , Rob Herring , Stephen Boyd From: Caleb Connolly Cc: ~postmarketos/upstreaming@lists.sr.ht, phone-devel@vger.kernel.org, Rob Herring , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Reply-To: Caleb Connolly Subject: [PATCH v3 2/2] dt-bindings: Document bindings for new SDM845 devices Message-ID: <20210114185227.25265-3-caleb@connolly.tech> In-Reply-To: <20210114185227.25265-1-caleb@connolly.tech> References: <20210114185227.25265-1-caleb@connolly.tech> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Document compatible bindings for the new OnePlus 6/6T devices. Signed-off-by: Caleb Connolly --- Documentation/devicetree/bindings/arm/qcom.yaml | 5 +++++ Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 2 files changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index c97d4a580f47..f3ad845754d3 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -171,6 +171,11 @@ properties: - enum: - qcom,ipq6018-cp01-c1 - const: qcom,ipq6018 + - items: + - enum: + - oneplus,enchilada + - oneplus,fajita + - const: qcom,sdm845 - items: - enum: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 041ae90b0d8f..aff440b18293 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -800,6 +800,8 @@ patternProperties: description: OLIMEX Ltd. "^olpc,.*": description: One Laptop Per Child + "^oneplus,.*": + description: One Plus Technology (Shenzhen) Co., Ltd. "^onion,.*": description: Onion Corporation "^onnn,.*":