From patchwork Tue Dec 8 14:09:58 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 339741 Delivered-To: patch@linaro.org Received: by 2002:a02:85a7:0:0:0:0:0 with SMTP id d36csp3722730jai; Tue, 8 Dec 2020 06:13:00 -0800 (PST) X-Google-Smtp-Source: ABdhPJzEQN2WMxgdldYSCleTPdGmjgmIhovgxm86ozrJWrjIB4kwuMCABpqmvUXWWQtm97a/g3bU X-Received: by 2002:a1c:ed13:: with SMTP id l19mr3956998wmh.141.1607436779944; Tue, 08 Dec 2020 06:12:59 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1607436779; cv=none; d=google.com; s=arc-20160816; b=kU5S7FmCIa3uAOE4D3AZpcCJ0FLUvqWd4sClQEl8WCj7fGRa+5p7vVdBLZb3AnFN8F g3MtrDgPVuXUI/xWNPzZuQfinn/jToO+OJVW0sJ/ymeItl3nkuqattLmsYDt/J8mQ2Ft OkmMof85O18WqvNi4PHaFBNC+jkmT2yiOamlh0KZbHBfzDGz0enq56Veo5gAUgpwHwMu hKyEeYTKX+m4bSh9LloAGkQSv9/lM0oy5gtwnt5SqLNPANHg2oe0jNUH/xUenBJ6eYgl bwKmkQ5EPNvs5rZB7lA2x/ncT6nH0+tgpOHjMaKo9FeSTPs+WiNKVRlUOtLkVoDe0uSS L26Q== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=AacZwSc46SqKlzyiWQMkZ5vJx3R68qtx7jGX8eKnRDw=; b=xVLrEyX9xXG4r3y+vkds/r5l/sZD0wYIT8+g2l4KC4dn+0t9pv7JnhyAwDJto11KO2 dLib6u0N2QpvAFtX4UBmkBtQjZnuln7zArnkZYV5PVv20B/9dKh6zqa6sTF5esMUmMM2 1SJvzg72PqgElr+BTV1sSWS9EmK6VgqJ58SNf3pyWzpRtTM2ngkkVP5sE17TYsitLjHN jUoxrW875OAPX7KTpt+8B2sHDdA+NTqI5Q6i/h5AMJqSDvvi6rCzVcXaQb/YkUbjbSZi j1dSMVEv5tW+HCCLDDLDJOaEFRQc1NsgI4O6HMt70pZ/fQuvfFRMQpkpTg8eV1sLAkc8 PaNg== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=MYeU4+s6; spf=pass (google.com: domain of linux-omap-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id y4si5275960eju.331.2020.12.08.06.12.59; Tue, 08 Dec 2020 06:12:59 -0800 (PST) Received-SPF: pass (google.com: domain of linux-omap-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=MYeU4+s6; spf=pass (google.com: domain of linux-omap-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729691AbgLHOMB (ORCPT + 3 others); Tue, 8 Dec 2020 09:12:01 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34756 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729688AbgLHOMA (ORCPT ); Tue, 8 Dec 2020 09:12:00 -0500 Received: from mail-lf1-x143.google.com (mail-lf1-x143.google.com [IPv6:2a00:1450:4864:20::143]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 07859C061257 for ; Tue, 8 Dec 2020 06:10:43 -0800 (PST) Received: by mail-lf1-x143.google.com with SMTP id y19so11298880lfa.13 for ; Tue, 08 Dec 2020 06:10:42 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=AacZwSc46SqKlzyiWQMkZ5vJx3R68qtx7jGX8eKnRDw=; b=MYeU4+s6vOH+H1f4GaOo7hlFzVlxwGKXJq/CFIREEzkexzdKIFH1MONvB9B+91yETu ec47eWXL/EveWgiulTyrHUTZ6huYQCcfOn0tMYvbLFTudViGO4Arv5UeA3VGyh7qYp+Z Z84mpgsg+4gQW/wZHNgo0VQfWt1NnEf7dOajrTDP761nC2mIpqgz7YMG2YYs2EEh85il SAJpPX3nJqjH/EhnUxtxJKgbJObx6HoI1W3uBAOOZM9+JyrUGaingR/zlmyO73cbBD+9 8y7DWn0IKqtoLMzN45+olLWrkO0hXOd42wyl52fLHKPBigEl6fSrBYJlZtGu8WGHw9bx 1O0A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=AacZwSc46SqKlzyiWQMkZ5vJx3R68qtx7jGX8eKnRDw=; b=ZEymOmfyqHMe8IcUPcRgzRe3hTIb9exOp0uwrSHgDN3mT3MgVVDT+0IvStK6ywcbLi JcUguBrGBZyxQoLfpDR9kglb+nICt5MT9aaj5KDTxvG6c19WGp7+j1Si/wY4vHU7rRyW Y6HBgPjJQzJkNxwWMcOTtNht2TC/kBCMYyxaCpz9ddlgyhmhuFwSt+2yOqtAbOKL+xjK OwdTlPy/Dek0Yh8/n7/0vLgi+8hrFPYioUT3OchAzYzE4+H8GUo+nl2faUsrNuAJRYVT uzNJx5Mfu5F2ODcLMO1ZulwhApmyUtOT9XHOEjBpUUYpReFxXvfZ5IKz8gRqbrOfwRkt M0sA== X-Gm-Message-State: AOAM530HQS2rmOzG7KxrZyZaxoKZJRm6O1TxdRZDAdnUwzN8u3ycY4ee 25DlTJx/lKFlJZhBpTZyALmmvw== X-Received: by 2002:a19:c717:: with SMTP id x23mr9784189lff.111.1607436641335; Tue, 08 Dec 2020 06:10:41 -0800 (PST) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id h23sm417017ljh.115.2020.12.08.06.10.40 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 08 Dec 2020 06:10:40 -0800 (PST) From: Grzegorz Jaszczyk To: ohad@wizery.com, bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, linux-remoteproc@vger.kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, praneeth@ti.com, rogerq@ti.com Subject: [PATCH v4 2/6] remoteproc: pru: Add a PRU remoteproc driver Date: Tue, 8 Dec 2020 15:09:58 +0100 Message-Id: <20201208141002.17777-3-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.29.0 In-Reply-To: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> References: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Suman Anna The Programmable Real-Time Unit Subsystem (PRUSS) consists of dual 32-bit RISC cores (Programmable Real-Time Units, or PRUs) for program execution. This patch adds a remoteproc platform driver for managing the individual PRU RISC cores life cycle. The PRUs do not have a unified address space (have an Instruction RAM and a primary Data RAM at both 0x0). The PRU remoteproc driver therefore uses a custom remoteproc core ELF loader ops. The added .da_to_va ops is only used to provide translations for the PRU Data RAMs. This remoteproc driver does not have support for error recovery and system suspend/resume features. Different compatibles are used to allow providing scalability for instance-specific device data if needed. The driver uses a default firmware-name retrieved from device-tree for each PRU core, and the firmwares are expected to be present in the standard Linux firmware search paths. They can also be adjusted by userspace if required through the sysfs interface provided by the remoteproc core. The PRU remoteproc driver uses a client-driven boot methodology: it does _not_ support auto-boot so that the PRU load and boot is dictated by the corresponding client drivers for achieving various usecases. This allows flexibility for the client drivers or applications to set a firmware name (if needed) based on their desired functionality and boot the PRU. The sysfs bind and unbind attributes have also been suppressed so that the PRU devices cannot be unbound and thereby shutdown a PRU from underneath a PRU client driver. The driver currently supports the AM335x, AM437x, AM57xx and 66AK2G SoCs, and support for other TI SoCs will be added in subsequent patches. Co-developed-by: Andrew F. Davis Signed-off-by: Andrew F. Davis Signed-off-by: Suman Anna Co-developed-by: Grzegorz Jaszczyk Signed-off-by: Grzegorz Jaszczyk Reviewed-by: Mathieu Poirier --- v3->v4: - No changes. v2->v3: Address Mathieu comments: - pru_rproc_load_elf_segments(): use filesz instead of (phdr->p_filesz) and move the check for the !filesz around PT_LOAD check. - pru_rproc_load_elf_segments(): move "skip the memzero.." comment below memcpy. - Add Reviewed-by: tag. v1->v2: - Use PRU_IRAM_ADDR_MASK definition instead of raw 0x3ffff. - Convert 'len' argument from int to size_t type in all *da_to_va. - Return 0 in case of missing .resource_table for pru_rproc_parse_fw() (move the logic from patch #3 where it was corrected). --- drivers/remoteproc/Kconfig | 12 + drivers/remoteproc/Makefile | 1 + drivers/remoteproc/pru_rproc.c | 433 +++++++++++++++++++++++++++++++++ 3 files changed, 446 insertions(+) create mode 100644 drivers/remoteproc/pru_rproc.c -- 2.29.0 diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig index d99548fb5dde..3e3865a7cd78 100644 --- a/drivers/remoteproc/Kconfig +++ b/drivers/remoteproc/Kconfig @@ -125,6 +125,18 @@ config KEYSTONE_REMOTEPROC It's safe to say N here if you're not interested in the Keystone DSPs or just want to use a bare minimum kernel. +config PRU_REMOTEPROC + tristate "TI PRU remoteproc support" + depends on TI_PRUSS + default TI_PRUSS + help + Support for TI PRU remote processors present within a PRU-ICSS + subsystem via the remote processor framework. + + Say Y or M here to support the Programmable Realtime Unit (PRU) + processors on various TI SoCs. It's safe to say N here if you're + not interested in the PRU or if you are unsure. + config QCOM_PIL_INFO tristate diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile index da2ace4ec86c..bb26c9e4ef9c 100644 --- a/drivers/remoteproc/Makefile +++ b/drivers/remoteproc/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_OMAP_REMOTEPROC) += omap_remoteproc.o obj-$(CONFIG_WKUP_M3_RPROC) += wkup_m3_rproc.o obj-$(CONFIG_DA8XX_REMOTEPROC) += da8xx_remoteproc.o obj-$(CONFIG_KEYSTONE_REMOTEPROC) += keystone_remoteproc.o +obj-$(CONFIG_PRU_REMOTEPROC) += pru_rproc.o obj-$(CONFIG_QCOM_PIL_INFO) += qcom_pil_info.o obj-$(CONFIG_QCOM_RPROC_COMMON) += qcom_common.o obj-$(CONFIG_QCOM_Q6V5_COMMON) += qcom_q6v5.o diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c new file mode 100644 index 000000000000..d33392bbd8af --- /dev/null +++ b/drivers/remoteproc/pru_rproc.c @@ -0,0 +1,433 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * PRU-ICSS remoteproc driver for various TI SoCs + * + * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/ + * + * Author(s): + * Suman Anna + * Andrew F. Davis + * Grzegorz Jaszczyk for Texas Instruments + */ + +#include +#include +#include +#include +#include + +#include "remoteproc_internal.h" +#include "remoteproc_elf_helpers.h" + +/* PRU_ICSS_PRU_CTRL registers */ +#define PRU_CTRL_CTRL 0x0000 +#define PRU_CTRL_STS 0x0004 + +/* CTRL register bit-fields */ +#define CTRL_CTRL_SOFT_RST_N BIT(0) +#define CTRL_CTRL_EN BIT(1) +#define CTRL_CTRL_SLEEPING BIT(2) +#define CTRL_CTRL_CTR_EN BIT(3) +#define CTRL_CTRL_SINGLE_STEP BIT(8) +#define CTRL_CTRL_RUNSTATE BIT(15) + +/* PRU Core IRAM address masks */ +#define PRU_IRAM_ADDR_MASK 0x3ffff +#define PRU0_IRAM_ADDR_MASK 0x34000 +#define PRU1_IRAM_ADDR_MASK 0x38000 + +/* PRU device addresses for various type of PRU RAMs */ +#define PRU_IRAM_DA 0 /* Instruction RAM */ +#define PRU_PDRAM_DA 0 /* Primary Data RAM */ +#define PRU_SDRAM_DA 0x2000 /* Secondary Data RAM */ +#define PRU_SHRDRAM_DA 0x10000 /* Shared Data RAM */ + +/** + * enum pru_iomem - PRU core memory/register range identifiers + * + * @PRU_IOMEM_IRAM: PRU Instruction RAM range + * @PRU_IOMEM_CTRL: PRU Control register range + * @PRU_IOMEM_DEBUG: PRU Debug register range + * @PRU_IOMEM_MAX: just keep this one at the end + */ +enum pru_iomem { + PRU_IOMEM_IRAM = 0, + PRU_IOMEM_CTRL, + PRU_IOMEM_DEBUG, + PRU_IOMEM_MAX, +}; + +/** + * struct pru_rproc - PRU remoteproc structure + * @id: id of the PRU core within the PRUSS + * @dev: PRU core device pointer + * @pruss: back-reference to parent PRUSS structure + * @rproc: remoteproc pointer for this PRU core + * @mem_regions: data for each of the PRU memory regions + * @fw_name: name of firmware image used during loading + */ +struct pru_rproc { + int id; + struct device *dev; + struct pruss *pruss; + struct rproc *rproc; + struct pruss_mem_region mem_regions[PRU_IOMEM_MAX]; + const char *fw_name; +}; + +static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg) +{ + return readl_relaxed(pru->mem_regions[PRU_IOMEM_CTRL].va + reg); +} + +static inline +void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val) +{ + writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg); +} + +static int pru_rproc_start(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + struct pru_rproc *pru = rproc->priv; + u32 val; + + dev_dbg(dev, "starting PRU%d: entry-point = 0x%llx\n", + pru->id, (rproc->bootaddr >> 2)); + + val = CTRL_CTRL_EN | ((rproc->bootaddr >> 2) << 16); + pru_control_write_reg(pru, PRU_CTRL_CTRL, val); + + return 0; +} + +static int pru_rproc_stop(struct rproc *rproc) +{ + struct device *dev = &rproc->dev; + struct pru_rproc *pru = rproc->priv; + u32 val; + + dev_dbg(dev, "stopping PRU%d\n", pru->id); + + val = pru_control_read_reg(pru, PRU_CTRL_CTRL); + val &= ~CTRL_CTRL_EN; + pru_control_write_reg(pru, PRU_CTRL_CTRL, val); + + return 0; +} + +/* + * Convert PRU device address (data spaces only) to kernel virtual address. + * + * Each PRU has access to all data memories within the PRUSS, accessible at + * different ranges. So, look through both its primary and secondary Data + * RAMs as well as any shared Data RAM to convert a PRU device address to + * kernel virtual address. Data RAM0 is primary Data RAM for PRU0 and Data + * RAM1 is primary Data RAM for PRU1. + */ +static void *pru_d_da_to_va(struct pru_rproc *pru, u32 da, size_t len) +{ + struct pruss_mem_region dram0, dram1, shrd_ram; + struct pruss *pruss = pru->pruss; + u32 offset; + void *va = NULL; + + if (len == 0) + return NULL; + + dram0 = pruss->mem_regions[PRUSS_MEM_DRAM0]; + dram1 = pruss->mem_regions[PRUSS_MEM_DRAM1]; + /* PRU1 has its local RAM addresses reversed */ + if (pru->id == 1) + swap(dram0, dram1); + shrd_ram = pruss->mem_regions[PRUSS_MEM_SHRD_RAM2]; + + if (da >= PRU_PDRAM_DA && da + len <= PRU_PDRAM_DA + dram0.size) { + offset = da - PRU_PDRAM_DA; + va = (__force void *)(dram0.va + offset); + } else if (da >= PRU_SDRAM_DA && + da + len <= PRU_SDRAM_DA + dram1.size) { + offset = da - PRU_SDRAM_DA; + va = (__force void *)(dram1.va + offset); + } else if (da >= PRU_SHRDRAM_DA && + da + len <= PRU_SHRDRAM_DA + shrd_ram.size) { + offset = da - PRU_SHRDRAM_DA; + va = (__force void *)(shrd_ram.va + offset); + } + + return va; +} + +/* + * Convert PRU device address (instruction space) to kernel virtual address. + * + * A PRU does not have an unified address space. Each PRU has its very own + * private Instruction RAM, and its device address is identical to that of + * its primary Data RAM device address. + */ +static void *pru_i_da_to_va(struct pru_rproc *pru, u32 da, size_t len) +{ + u32 offset; + void *va = NULL; + + if (len == 0) + return NULL; + + if (da >= PRU_IRAM_DA && + da + len <= PRU_IRAM_DA + pru->mem_regions[PRU_IOMEM_IRAM].size) { + offset = da - PRU_IRAM_DA; + va = (__force void *)(pru->mem_regions[PRU_IOMEM_IRAM].va + + offset); + } + + return va; +} + +/* + * Provide address translations for only PRU Data RAMs through the remoteproc + * core for any PRU client drivers. The PRU Instruction RAM access is restricted + * only to the PRU loader code. + */ +static void *pru_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) +{ + struct pru_rproc *pru = rproc->priv; + + return pru_d_da_to_va(pru, da, len); +} + +/* PRU-specific address translator used by PRU loader. */ +static void *pru_da_to_va(struct rproc *rproc, u64 da, size_t len, bool is_iram) +{ + struct pru_rproc *pru = rproc->priv; + void *va; + + if (is_iram) + va = pru_i_da_to_va(pru, da, len); + else + va = pru_d_da_to_va(pru, da, len); + + return va; +} + +static struct rproc_ops pru_rproc_ops = { + .start = pru_rproc_start, + .stop = pru_rproc_stop, + .da_to_va = pru_rproc_da_to_va, +}; + +static int +pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw) +{ + struct device *dev = &rproc->dev; + struct elf32_hdr *ehdr; + struct elf32_phdr *phdr; + int i, ret = 0; + const u8 *elf_data = fw->data; + + ehdr = (struct elf32_hdr *)elf_data; + phdr = (struct elf32_phdr *)(elf_data + ehdr->e_phoff); + + /* go through the available ELF segments */ + for (i = 0; i < ehdr->e_phnum; i++, phdr++) { + u32 da = phdr->p_paddr; + u32 memsz = phdr->p_memsz; + u32 filesz = phdr->p_filesz; + u32 offset = phdr->p_offset; + bool is_iram; + void *ptr; + + if (phdr->p_type != PT_LOAD || !filesz) + continue; + + dev_dbg(dev, "phdr: type %d da 0x%x memsz 0x%x filesz 0x%x\n", + phdr->p_type, da, memsz, filesz); + + if (filesz > memsz) { + dev_err(dev, "bad phdr filesz 0x%x memsz 0x%x\n", + filesz, memsz); + ret = -EINVAL; + break; + } + + if (offset + filesz > fw->size) { + dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n", + offset + filesz, fw->size); + ret = -EINVAL; + break; + } + + /* grab the kernel address for this device address */ + is_iram = phdr->p_flags & PF_X; + ptr = pru_da_to_va(rproc, da, memsz, is_iram); + if (!ptr) { + dev_err(dev, "bad phdr da 0x%x mem 0x%x\n", da, memsz); + ret = -EINVAL; + break; + } + + memcpy(ptr, elf_data + phdr->p_offset, filesz); + + /* skip the memzero logic performed by remoteproc ELF loader */ + } + + return ret; +} + +/* + * Use a custom parse_fw callback function for dealing with PRU firmware + * specific sections. + */ +static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) +{ + int ret; + + /* load optional rsc table */ + ret = rproc_elf_load_rsc_table(rproc, fw); + if (ret == -EINVAL) + dev_dbg(&rproc->dev, "no resource table found for this fw\n"); + else if (ret) + return ret; + + return 0; +} + +/* + * Compute PRU id based on the IRAM addresses. The PRU IRAMs are + * always at a particular offset within the PRUSS address space. + */ +static int pru_rproc_set_id(struct pru_rproc *pru) +{ + int ret = 0; + + switch (pru->mem_regions[PRU_IOMEM_IRAM].pa & PRU_IRAM_ADDR_MASK) { + case PRU0_IRAM_ADDR_MASK: + pru->id = 0; + break; + case PRU1_IRAM_ADDR_MASK: + pru->id = 1; + break; + default: + ret = -EINVAL; + } + + return ret; +} + +static int pru_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct platform_device *ppdev = to_platform_device(dev->parent); + struct pru_rproc *pru; + const char *fw_name; + struct rproc *rproc = NULL; + struct resource *res; + int i, ret; + const char *mem_names[PRU_IOMEM_MAX] = { "iram", "control", "debug" }; + + ret = of_property_read_string(np, "firmware-name", &fw_name); + if (ret) { + dev_err(dev, "unable to retrieve firmware-name %d\n", ret); + return ret; + } + + rproc = devm_rproc_alloc(dev, pdev->name, &pru_rproc_ops, fw_name, + sizeof(*pru)); + if (!rproc) { + dev_err(dev, "rproc_alloc failed\n"); + return -ENOMEM; + } + /* use a custom load function to deal with PRU-specific quirks */ + rproc->ops->load = pru_rproc_load_elf_segments; + + /* use a custom parse function to deal with PRU-specific resources */ + rproc->ops->parse_fw = pru_rproc_parse_fw; + + /* error recovery is not supported for PRUs */ + rproc->recovery_disabled = true; + + /* + * rproc_add will auto-boot the processor normally, but this is not + * desired with PRU client driven boot-flow methodology. A PRU + * application/client driver will boot the corresponding PRU + * remote-processor as part of its state machine either through the + * remoteproc sysfs interface or through the equivalent kernel API. + */ + rproc->auto_boot = false; + + pru = rproc->priv; + pru->dev = dev; + pru->pruss = platform_get_drvdata(ppdev); + pru->rproc = rproc; + pru->fw_name = fw_name; + + for (i = 0; i < ARRAY_SIZE(mem_names); i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + pru->mem_regions[i].va = devm_ioremap_resource(dev, res); + if (IS_ERR(pru->mem_regions[i].va)) { + dev_err(dev, "failed to parse and map memory resource %d %s\n", + i, mem_names[i]); + ret = PTR_ERR(pru->mem_regions[i].va); + return ret; + } + pru->mem_regions[i].pa = res->start; + pru->mem_regions[i].size = resource_size(res); + + dev_dbg(dev, "memory %8s: pa %pa size 0x%zx va %pK\n", + mem_names[i], &pru->mem_regions[i].pa, + pru->mem_regions[i].size, pru->mem_regions[i].va); + } + + ret = pru_rproc_set_id(pru); + if (ret < 0) + return ret; + + platform_set_drvdata(pdev, rproc); + + ret = devm_rproc_add(dev, pru->rproc); + if (ret) { + dev_err(dev, "rproc_add failed: %d\n", ret); + return ret; + } + + dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np); + + return 0; +} + +static int pru_rproc_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct rproc *rproc = platform_get_drvdata(pdev); + + dev_dbg(dev, "%s: removing rproc %s\n", __func__, rproc->name); + + return 0; +} + +static const struct of_device_id pru_rproc_match[] = { + { .compatible = "ti,am3356-pru", }, + { .compatible = "ti,am4376-pru", }, + { .compatible = "ti,am5728-pru", }, + { .compatible = "ti,k2g-pru", }, + {}, +}; +MODULE_DEVICE_TABLE(of, pru_rproc_match); + +static struct platform_driver pru_rproc_driver = { + .driver = { + .name = "pru-rproc", + .of_match_table = pru_rproc_match, + .suppress_bind_attrs = true, + }, + .probe = pru_rproc_probe, + .remove = pru_rproc_remove, +}; +module_platform_driver(pru_rproc_driver); + +MODULE_AUTHOR("Suman Anna "); +MODULE_AUTHOR("Andrew F. Davis "); +MODULE_AUTHOR("Grzegorz Jaszczyk "); +MODULE_DESCRIPTION("PRU-ICSS Remote Processor Driver"); +MODULE_LICENSE("GPL v2"); From patchwork Tue Dec 8 14:09:59 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 340066 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id BC879C3526A for ; Tue, 8 Dec 2020 14:12:10 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 861B123AC1 for ; Tue, 8 Dec 2020 14:12:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729718AbgLHOME (ORCPT ); Tue, 8 Dec 2020 09:12:04 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34754 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729696AbgLHOMA (ORCPT ); Tue, 8 Dec 2020 09:12:00 -0500 Received: from mail-lj1-x234.google.com (mail-lj1-x234.google.com [IPv6:2a00:1450:4864:20::234]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 82291C0611CF for ; Tue, 8 Dec 2020 06:10:44 -0800 (PST) Received: by mail-lj1-x234.google.com with SMTP id o24so19581535ljj.6 for ; Tue, 08 Dec 2020 06:10:44 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=uWuPHQBJYGT5qGWC4gn24eFk6bpKJ9aYZMm0zFyUADA=; b=V6h3dlkOTuWhxG2O96sMaBTGQFSKTmrBaaGudoDL45stb1gzPlpJnIJD3YKrEAKeYp tWBN37LEOk+4ymUV4a4jmXH5UBy9o9NBY84/u8N5z3eU/MiuYbpdCL6Umg67lb7SJLGG ZYL/TWZmDAX4fRUYIdSIaObXuuqpAHNkTDHa9LK21nwWKbBap3QhNe/H8CMJxBvzoVzM gAImOHX4QViOEUwQq9mGM5dso729a39+ZXGbJPWigsRxjhlRJv4XjfJaCHk+lmfDAfeF CSods8FEb84txLEE1IeWRczAuMsnu3fLq+a5fFyJaVUXXvtXWOnESBUFpnDc46NcWQxv vm2Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=uWuPHQBJYGT5qGWC4gn24eFk6bpKJ9aYZMm0zFyUADA=; b=JqzVST3EVm5PYOHt+qXVK1jPrJ6V3mZP98nL3YxsUYRBa/37IdT1Q1FrIzrGVYxkt3 EBOZ5NKHXdiRLOKsPskYjrY9Ob9aHiOT76XD1JI5ChuqlZA10ZVblmoFWqLtSsjHgIfP dAVOw7YUpXncBbveI7RtKdUKu3zE4g6j+l+PBr0ISA6t3aZAPzC0s704FqgknKbYACkR 8oDtqyMm9h5WpAopwgBwMt/ePA9c7hHhRajlWATa2MG6ljF3+a0lgwhj9ggzEu0Yjx9v ZFUJ1P3lUbGqh67CrhvS6SsJwhy6ycDhW3axqTlg0kOh1g2lTowfPwoit5ln1aWzSFDX 1/SQ== X-Gm-Message-State: AOAM530CU+T308PPP/+9XE4A0Bz/+XP7kpdFp7twEnsZ/ZRZCbdVVJQs FHrAXOuFB/Ff89F0jumIKsjljQ== X-Google-Smtp-Source: ABdhPJzmOT4PpCrY/YhxQeTaaYKtg6xLGqF+CsOW9sZEyh2Lv+hz5C/I8piwo4/ZDWeCh6Ng2RKn3w== X-Received: by 2002:a2e:b949:: with SMTP id 9mr5483079ljs.376.1607436642826; Tue, 08 Dec 2020 06:10:42 -0800 (PST) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id h23sm417017ljh.115.2020.12.08.06.10.41 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 08 Dec 2020 06:10:42 -0800 (PST) From: Grzegorz Jaszczyk To: ohad@wizery.com, bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, linux-remoteproc@vger.kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, praneeth@ti.com, rogerq@ti.com Subject: [PATCH v4 3/6] remoteproc: pru: Add support for PRU specific interrupt configuration Date: Tue, 8 Dec 2020 15:09:59 +0100 Message-Id: <20201208141002.17777-4-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.29.0 In-Reply-To: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> References: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org The firmware blob can contain optional ELF sections: .resource_table section and .pru_irq_map one. The second one contains the PRUSS interrupt mapping description, which needs to be setup before powering on the PRU core. To avoid RAM wastage this ELF section is not mapped to any ELF segment (by the firmware linker) and therefore is not loaded to PRU memory. The PRU interrupt configuration is handled within the PRUSS INTC irqchip driver and leverages the system events to interrupt channels and host interrupts mapping configuration. Relevant irq routing information is passed through a special .pru_irq_map ELF section (for interrupts routed to and used by PRU cores) or via the PRU application's device tree node (for interrupts routed to and used by the main CPU). The mappings are currently programmed during the booting/shutdown of the PRU. The interrupt configuration passed through .pru_irq_map ELF section is optional. It varies on specific firmware functionality and therefore have to be unwinded during PRU stop and performed again during PRU start. Co-developed-by: Suman Anna Signed-off-by: Suman Anna Signed-off-by: Grzegorz Jaszczyk Reviewed-by: Mathieu Poirier --- v3->v4: - Use sizeof(unsigned int) instead of sizeof(int) for kcalloc in pru_handle_intrmap(). v2->v3: Address Mathieu comments: - Because irq_create_fwspec_mapping() returns an unsigned int, convert mapped_irq type to 'unsigned int *'. Due to this change update relevant error path. - Since the num_evts is u8 value and can't be negative drop 'rsc->num_evts < 0' check. Fix checkpatch --strict warning: CHECK: Alignment should match open parenthesis #163: FILE: drivers/remoteproc/pru_rproc.c:165: + dev_dbg(dev, "mapping%d: event %d, chnl %d, host %d\n", + i, fwspec.param[0], fwspec.param[1], fwspec.param[2]); v1->v2: Address Suman comments: - Rework pru_rproc_find_interrupt_map() style: get rid of generic ELF helpers macros usage and stick with elf32_* related structs instead (in order to be consistent with pru_rproc_load_elf_segments() style). - Improve comments and dev_err msgs in pru_rproc_find_interrupt_map(). - Use u8 instead of ssize_t for evt_count. --- drivers/remoteproc/pru_rproc.c | 181 +++++++++++++++++++++++++++++++++ drivers/remoteproc/pru_rproc.h | 46 +++++++++ 2 files changed, 227 insertions(+) create mode 100644 drivers/remoteproc/pru_rproc.h diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c index d33392bbd8af..72e64d15f0dc 100644 --- a/drivers/remoteproc/pru_rproc.c +++ b/drivers/remoteproc/pru_rproc.c @@ -11,13 +11,16 @@ */ #include +#include #include #include +#include #include #include #include "remoteproc_internal.h" #include "remoteproc_elf_helpers.h" +#include "pru_rproc.h" /* PRU_ICSS_PRU_CTRL registers */ #define PRU_CTRL_CTRL 0x0000 @@ -42,6 +45,8 @@ #define PRU_SDRAM_DA 0x2000 /* Secondary Data RAM */ #define PRU_SHRDRAM_DA 0x10000 /* Shared Data RAM */ +#define MAX_PRU_SYS_EVENTS 160 + /** * enum pru_iomem - PRU core memory/register range identifiers * @@ -65,6 +70,10 @@ enum pru_iomem { * @rproc: remoteproc pointer for this PRU core * @mem_regions: data for each of the PRU memory regions * @fw_name: name of firmware image used during loading + * @mapped_irq: virtual interrupt numbers of created fw specific mapping + * @pru_interrupt_map: pointer to interrupt mapping description (firmware) + * @pru_interrupt_map_sz: pru_interrupt_map size + * @evt_count: number of mapped events */ struct pru_rproc { int id; @@ -73,6 +82,10 @@ struct pru_rproc { struct rproc *rproc; struct pruss_mem_region mem_regions[PRU_IOMEM_MAX]; const char *fw_name; + unsigned int *mapped_irq; + struct pru_irq_rsc *pru_interrupt_map; + size_t pru_interrupt_map_sz; + u8 evt_count; }; static inline u32 pru_control_read_reg(struct pru_rproc *pru, unsigned int reg) @@ -86,15 +99,108 @@ void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val) writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg); } +static void pru_dispose_irq_mapping(struct pru_rproc *pru) +{ + while (pru->evt_count--) { + if (pru->mapped_irq[pru->evt_count] > 0) + irq_dispose_mapping(pru->mapped_irq[pru->evt_count]); + } + + kfree(pru->mapped_irq); +} + +/* + * Parse the custom PRU interrupt map resource and configure the INTC + * appropriately. + */ +static int pru_handle_intrmap(struct rproc *rproc) +{ + struct device *dev = rproc->dev.parent; + struct pru_rproc *pru = rproc->priv; + struct pru_irq_rsc *rsc = pru->pru_interrupt_map; + struct irq_fwspec fwspec; + struct device_node *irq_parent; + int i, ret = 0; + + /* not having pru_interrupt_map is not an error */ + if (!rsc) + return 0; + + /* currently supporting only type 0 */ + if (rsc->type != 0) { + dev_err(dev, "unsupported rsc type: %d\n", rsc->type); + return -EINVAL; + } + + if (rsc->num_evts > MAX_PRU_SYS_EVENTS) + return -EINVAL; + + if (sizeof(*rsc) + rsc->num_evts * sizeof(struct pruss_int_map) != + pru->pru_interrupt_map_sz) + return -EINVAL; + + pru->evt_count = rsc->num_evts; + pru->mapped_irq = kcalloc(pru->evt_count, sizeof(unsigned int), + GFP_KERNEL); + if (!pru->mapped_irq) + return -ENOMEM; + + /* + * parse and fill in system event to interrupt channel and + * channel-to-host mapping + */ + irq_parent = of_irq_find_parent(pru->dev->of_node); + if (!irq_parent) { + kfree(pru->mapped_irq); + return -ENODEV; + } + + fwspec.fwnode = of_node_to_fwnode(irq_parent); + fwspec.param_count = 3; + for (i = 0; i < pru->evt_count; i++) { + fwspec.param[0] = rsc->pru_intc_map[i].event; + fwspec.param[1] = rsc->pru_intc_map[i].chnl; + fwspec.param[2] = rsc->pru_intc_map[i].host; + + dev_dbg(dev, "mapping%d: event %d, chnl %d, host %d\n", + i, fwspec.param[0], fwspec.param[1], fwspec.param[2]); + + pru->mapped_irq[i] = irq_create_fwspec_mapping(&fwspec); + if (!pru->mapped_irq[i]) { + dev_err(dev, "failed to get virq\n"); + ret = pru->mapped_irq[i]; + goto map_fail; + } + } + + return ret; + +map_fail: + pru_dispose_irq_mapping(pru); + + return ret; +} + static int pru_rproc_start(struct rproc *rproc) { struct device *dev = &rproc->dev; struct pru_rproc *pru = rproc->priv; u32 val; + int ret; dev_dbg(dev, "starting PRU%d: entry-point = 0x%llx\n", pru->id, (rproc->bootaddr >> 2)); + ret = pru_handle_intrmap(rproc); + /* + * reset references to pru interrupt map - they will stop being valid + * after rproc_start returns + */ + pru->pru_interrupt_map = NULL; + pru->pru_interrupt_map_sz = 0; + if (ret) + return ret; + val = CTRL_CTRL_EN | ((rproc->bootaddr >> 2) << 16); pru_control_write_reg(pru, PRU_CTRL_CTRL, val); @@ -113,6 +219,10 @@ static int pru_rproc_stop(struct rproc *rproc) val &= ~CTRL_CTRL_EN; pru_control_write_reg(pru, PRU_CTRL_CTRL, val); + /* dispose irq mapping - new firmware can provide new mapping */ + if (pru->mapped_irq) + pru_dispose_irq_mapping(pru); + return 0; } @@ -273,12 +383,70 @@ pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw) return ret; } +static const void * +pru_rproc_find_interrupt_map(struct device *dev, const struct firmware *fw) +{ + struct elf32_shdr *shdr, *name_table_shdr; + const char *name_table; + const u8 *elf_data = fw->data; + struct elf32_hdr *ehdr = (struct elf32_hdr *)elf_data; + u16 shnum = ehdr->e_shnum; + u16 shstrndx = ehdr->e_shstrndx; + int i; + + /* first, get the section header */ + shdr = (struct elf32_shdr *)(elf_data + ehdr->e_shoff); + /* compute name table section header entry in shdr array */ + name_table_shdr = shdr + shstrndx; + /* finally, compute the name table section address in elf */ + name_table = elf_data + name_table_shdr->sh_offset; + + for (i = 0; i < shnum; i++, shdr++) { + u32 size = shdr->sh_size; + u32 offset = shdr->sh_offset; + u32 name = shdr->sh_name; + + if (strcmp(name_table + name, ".pru_irq_map")) + continue; + + /* make sure we have the entire irq map */ + if (offset + size > fw->size || offset + size < size) { + dev_err(dev, ".pru_irq_map section truncated\n"); + return ERR_PTR(-EINVAL); + } + + /* make sure irq map has at least the header */ + if (sizeof(struct pru_irq_rsc) > size) { + dev_err(dev, "header-less .pru_irq_map section\n"); + return ERR_PTR(-EINVAL); + } + + return shdr; + } + + dev_dbg(dev, "no .pru_irq_map section found for this fw\n"); + + return NULL; +} + /* * Use a custom parse_fw callback function for dealing with PRU firmware * specific sections. + * + * The firmware blob can contain optional ELF sections: .resource_table section + * and .pru_irq_map one. The second one contains the PRUSS interrupt mapping + * description, which needs to be setup before powering on the PRU core. To + * avoid RAM wastage this ELF section is not mapped to any ELF segment (by the + * firmware linker) and therefore is not loaded to PRU memory. */ static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) { + struct device *dev = &rproc->dev; + struct pru_rproc *pru = rproc->priv; + const u8 *elf_data = fw->data; + const void *shdr; + u8 class = fw_elf_get_class(fw); + u64 sh_offset; int ret; /* load optional rsc table */ @@ -288,6 +456,19 @@ static int pru_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) else if (ret) return ret; + /* find .pru_interrupt_map section, not having it is not an error */ + shdr = pru_rproc_find_interrupt_map(dev, fw); + if (IS_ERR(shdr)) + return PTR_ERR(shdr); + + if (!shdr) + return 0; + + /* preserve pointer to PRU interrupt map together with it size */ + sh_offset = elf_shdr_get_sh_offset(class, shdr); + pru->pru_interrupt_map = (struct pru_irq_rsc *)(elf_data + sh_offset); + pru->pru_interrupt_map_sz = elf_shdr_get_sh_size(class, shdr); + return 0; } diff --git a/drivers/remoteproc/pru_rproc.h b/drivers/remoteproc/pru_rproc.h new file mode 100644 index 000000000000..8ee9c3171610 --- /dev/null +++ b/drivers/remoteproc/pru_rproc.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */ +/* + * PRUSS Remote Processor specific types + * + * Copyright (C) 2014-2020 Texas Instruments Incorporated - https://www.ti.com/ + * Suman Anna + */ + +#ifndef _PRU_RPROC_H_ +#define _PRU_RPROC_H_ + +/** + * struct pruss_int_map - PRU system events _to_ channel and host mapping + * @event: number of the system event + * @chnl: channel number assigned to a given @event + * @host: host number assigned to a given @chnl + * + * PRU system events are mapped to channels, and these channels are mapped + * to host interrupts. Events can be mapped to channels in a one-to-one or + * many-to-one ratio (multiple events per channel), and channels can be + * mapped to host interrupts in a one-to-one or many-to-one ratio (multiple + * channels per interrupt). + */ +struct pruss_int_map { + u8 event; + u8 chnl; + u8 host; +}; + +/** + * struct pru_irq_rsc - PRU firmware section header for IRQ data + * @type: resource type + * @num_evts: number of described events + * @pru_intc_map: PRU interrupt routing description + * + * The PRU firmware blob can contain optional .pru_irq_map ELF section, which + * provides the PRUSS interrupt mapping description. The pru_irq_rsc struct + * describes resource entry format. + */ +struct pru_irq_rsc { + u8 type; + u8 num_evts; + struct pruss_int_map pru_intc_map[]; +} __packed; + +#endif /* _PRU_RPROC_H_ */ From patchwork Tue Dec 8 14:10:00 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 339742 Delivered-To: patch@linaro.org Received: by 2002:a02:85a7:0:0:0:0:0 with SMTP id d36csp3722754jai; Tue, 8 Dec 2020 06:13:01 -0800 (PST) X-Google-Smtp-Source: ABdhPJzNo24wMhpxcu/ZGBOuyWVnYyCnt4+sGmjRIrsZOLRZ7oS7yGXo20v3mO8eVor3Wg/WP36/ X-Received: by 2002:a50:955b:: with SMTP id v27mr24409099eda.324.1607436780854; Tue, 08 Dec 2020 06:13:00 -0800 (PST) ARC-Seal: i=1; a=rsa-sha256; t=1607436780; cv=none; d=google.com; s=arc-20160816; b=pTuWyfnVWi03wasuLUFlrayO1+SDesFO71j63Cnw6eb2LctqF7Z4KErax9R4A8qZI5 7q1Jzdpn1aL0+4v3nB5vxHeW1XG8ZIX2vv2AVvDmPZYMwWbnmQMNp3EwQg+fFvy2j3kH uwp6qSism2znXE8N59nnnuCM5r/ea/xpSxruFfuSfPn6iFv3Uba+4q3yanyynLgsDLHs VqOYjJVwceKXKL08Q5qdXgMK8ohO4kzvBrk36A51X2WrG0Wqhf8fkDa5+e7/8iVTFC7h lJ0rgLIkSPfKgYywGOtCktakOSI1ASsJuR4yurTJulv2lfzwT32zT0+Ig9Xv/OM9j5Lh wnbw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=lNDBikXll/RoG1bzAS6wZydhLpoIoInZqBARx/07aaA=; b=e1rIjbjeRqhhXsfG9pYyh3ZhQwE9MoohkhA7NExlV785MjilvbG7cWCglv7a70zPPZ Pfz9pAeDEmI8Lf7OgtTVbg2EG/Q9uxhHXkFUTPHP0ayqzBt5f+B3bD0FzHyCn5HpM7pR nAD8b9KUBnweaSvaQ3b9RMICtx3m/CtdTUe4nTczmqqzatPGflbp7QUPO1NPa0067cST zqhw/WLKMtygTWBBRl7FpKzAgjAWIRx7TLWghVQSX2YZWUBqfS+HFDAdEhWzcrbK+/+O qmG/BkAG6ckipgcmYZCFHn0J24yTNvSa5lfux21gJMp6Bo6fi1Ns64ivmtv/lpjY+a9Q aYMQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=zSNO9Ll0; spf=pass (google.com: domain of linux-omap-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id y4si5275960eju.331.2020.12.08.06.13.00; Tue, 08 Dec 2020 06:13:00 -0800 (PST) Received-SPF: pass (google.com: domain of linux-omap-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=zSNO9Ll0; spf=pass (google.com: domain of linux-omap-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-omap-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729721AbgLHOMD (ORCPT + 3 others); Tue, 8 Dec 2020 09:12:03 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34696 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729718AbgLHOMC (ORCPT ); Tue, 8 Dec 2020 09:12:02 -0500 Received: from mail-lf1-x143.google.com (mail-lf1-x143.google.com [IPv6:2a00:1450:4864:20::143]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E202CC0611E4 for ; Tue, 8 Dec 2020 06:10:45 -0800 (PST) Received: by mail-lf1-x143.google.com with SMTP id r24so23402421lfm.8 for ; Tue, 08 Dec 2020 06:10:45 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=lNDBikXll/RoG1bzAS6wZydhLpoIoInZqBARx/07aaA=; b=zSNO9Ll0Oe4UWAbkCJf/8THXasWEpNEj6OqYFUkkGpAAKHQIbo9gZIP7G4WZJyC8c4 0EjcgeJCl8DeHN+/tWCNrRSCBViNXZpmUugHJftiIisfK5BuiXlOTAmUPWYz4frprHrw urXHis94TSNekBNjBFPx4Z7xy1rgsaLcWmSLFHjVxFinKrEgFVNZawSG+bXn39VFZEZ3 XjJ2GXzeDkoMrNV5PvBi2KspB5YN4lJPrZdboiatdhZdKX+Iu8lSMiUzdWG9f8OPTFNG 4/Vjnkv8Jcie00mZ16QASRjlew4JQgh5pdO4Jiy2qC19nTTZXiAutHNbu3lA4o86yyEg tnsw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=lNDBikXll/RoG1bzAS6wZydhLpoIoInZqBARx/07aaA=; b=nkMvdZwnDw4zWOqz/UZdDCfVao5qtxAvQSp0LKzX/BEFAmDwsxyrruyCu/ZD9NHYPB S7cteteTXYBKvjY3qxWI7yh0xNt2vmBvkdcN+8DPhBOBbmkeBP+e4LxL8jYWjSxPDtmr rdOCxdFceba8VYQGArwg6jDg7OktPtCooTjhkBUdZX7oKpMXdCsh72YK1HfPnXiB1NWQ YvrqceYUMlJmtFsjDyjmu/2CDztjCT86v1cyz4j6N8uOMYb1Ao2X6wTtQjHLoNAX+J5I fHpwHxw/aAJ3Aipo3jXDGpG5ROIRnWd1kXQ1aRfi0ECNu7R1TZBvRlW8/FAq1Ci7x/2P WNdQ== X-Gm-Message-State: AOAM532A+IgDjcgxSadvDZ7+NMWKdsy/Fom6q9T9kqvif/o3Fmws6NRv 3lFuKcRiI9leyfwedY7PV9d4tQ== X-Received: by 2002:a05:6512:3047:: with SMTP id b7mr9716612lfb.210.1607436644285; Tue, 08 Dec 2020 06:10:44 -0800 (PST) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id h23sm417017ljh.115.2020.12.08.06.10.42 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 08 Dec 2020 06:10:43 -0800 (PST) From: Grzegorz Jaszczyk To: ohad@wizery.com, bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, linux-remoteproc@vger.kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, praneeth@ti.com, rogerq@ti.com Subject: [PATCH v4 4/6] remoteproc: pru: Add pru-specific debugfs support Date: Tue, 8 Dec 2020 15:10:00 +0100 Message-Id: <20201208141002.17777-5-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.29.0 In-Reply-To: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> References: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Suman Anna The remoteproc core creates certain standard debugfs entries, that does not give a whole lot of useful information for the PRUs. The PRU remoteproc driver is enhanced to add additional debugfs entries for PRU. These will be auto-cleaned up when the parent rproc debug directory is removed. The enhanced debugfs support adds two new entries: 'regs' and 'single_step'. The 'regs' dumps out the useful CTRL sub-module registers as well as each of the 32 GPREGs and CT_REGs registers. The GPREGs and CT_REGs though are printed only when the PRU is halted and accessible as per the IP design. The 'single_step' utilizes the single-step execution of the PRU cores. Writing a non-zero value performs a single step, and a zero value restores the PRU to execute in the same mode as the mode before the first single step. (note: if the PRU is halted because of a halt instruction, then no change occurs). Logic for setting the PC and jumping over a halt instruction shall be added in the future. Signed-off-by: Suman Anna Signed-off-by: Grzegorz Jaszczyk Reviewed-by: Mathieu Poirier --- v3->v4: - No changes. v2->v3: Address Mathieu comments: - Remove extra line before DEFINE_SHOW_ATTRIBUTE(). - Add Reviewed-by: tag. --- drivers/remoteproc/pru_rproc.c | 136 +++++++++++++++++++++++++++++++++ 1 file changed, 136 insertions(+) -- 2.29.0 diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c index 72e64d15f0dc..59240fd82f56 100644 --- a/drivers/remoteproc/pru_rproc.c +++ b/drivers/remoteproc/pru_rproc.c @@ -11,6 +11,7 @@ */ #include +#include #include #include #include @@ -25,6 +26,13 @@ /* PRU_ICSS_PRU_CTRL registers */ #define PRU_CTRL_CTRL 0x0000 #define PRU_CTRL_STS 0x0004 +#define PRU_CTRL_WAKEUP_EN 0x0008 +#define PRU_CTRL_CYCLE 0x000C +#define PRU_CTRL_STALL 0x0010 +#define PRU_CTRL_CTBIR0 0x0020 +#define PRU_CTRL_CTBIR1 0x0024 +#define PRU_CTRL_CTPPR0 0x0028 +#define PRU_CTRL_CTPPR1 0x002C /* CTRL register bit-fields */ #define CTRL_CTRL_SOFT_RST_N BIT(0) @@ -34,6 +42,10 @@ #define CTRL_CTRL_SINGLE_STEP BIT(8) #define CTRL_CTRL_RUNSTATE BIT(15) +/* PRU_ICSS_PRU_DEBUG registers */ +#define PRU_DEBUG_GPREG(x) (0x0000 + (x) * 4) +#define PRU_DEBUG_CT_REG(x) (0x0080 + (x) * 4) + /* PRU Core IRAM address masks */ #define PRU_IRAM_ADDR_MASK 0x3ffff #define PRU0_IRAM_ADDR_MASK 0x34000 @@ -73,6 +85,8 @@ enum pru_iomem { * @mapped_irq: virtual interrupt numbers of created fw specific mapping * @pru_interrupt_map: pointer to interrupt mapping description (firmware) * @pru_interrupt_map_sz: pru_interrupt_map size + * @dbg_single_step: debug state variable to set PRU into single step mode + * @dbg_continuous: debug state variable to restore PRU execution mode * @evt_count: number of mapped events */ struct pru_rproc { @@ -85,6 +99,8 @@ struct pru_rproc { unsigned int *mapped_irq; struct pru_irq_rsc *pru_interrupt_map; size_t pru_interrupt_map_sz; + u32 dbg_single_step; + u32 dbg_continuous; u8 evt_count; }; @@ -99,6 +115,124 @@ void pru_control_write_reg(struct pru_rproc *pru, unsigned int reg, u32 val) writel_relaxed(val, pru->mem_regions[PRU_IOMEM_CTRL].va + reg); } +static inline u32 pru_debug_read_reg(struct pru_rproc *pru, unsigned int reg) +{ + return readl_relaxed(pru->mem_regions[PRU_IOMEM_DEBUG].va + reg); +} + +static int regs_show(struct seq_file *s, void *data) +{ + struct rproc *rproc = s->private; + struct pru_rproc *pru = rproc->priv; + int i, nregs = 32; + u32 pru_sts; + int pru_is_running; + + seq_puts(s, "============== Control Registers ==============\n"); + seq_printf(s, "CTRL := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTRL)); + pru_sts = pru_control_read_reg(pru, PRU_CTRL_STS); + seq_printf(s, "STS (PC) := 0x%08x (0x%08x)\n", pru_sts, pru_sts << 2); + seq_printf(s, "WAKEUP_EN := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_WAKEUP_EN)); + seq_printf(s, "CYCLE := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CYCLE)); + seq_printf(s, "STALL := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_STALL)); + seq_printf(s, "CTBIR0 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTBIR0)); + seq_printf(s, "CTBIR1 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTBIR1)); + seq_printf(s, "CTPPR0 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTPPR0)); + seq_printf(s, "CTPPR1 := 0x%08x\n", + pru_control_read_reg(pru, PRU_CTRL_CTPPR1)); + + seq_puts(s, "=============== Debug Registers ===============\n"); + pru_is_running = pru_control_read_reg(pru, PRU_CTRL_CTRL) & + CTRL_CTRL_RUNSTATE; + if (pru_is_running) { + seq_puts(s, "PRU is executing, cannot print/access debug registers.\n"); + return 0; + } + + for (i = 0; i < nregs; i++) { + seq_printf(s, "GPREG%-2d := 0x%08x\tCT_REG%-2d := 0x%08x\n", + i, pru_debug_read_reg(pru, PRU_DEBUG_GPREG(i)), + i, pru_debug_read_reg(pru, PRU_DEBUG_CT_REG(i))); + } + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(regs); + +/* + * Control PRU single-step mode + * + * This is a debug helper function used for controlling the single-step + * mode of the PRU. The PRU Debug registers are not accessible when the + * PRU is in RUNNING state. + * + * Writing a non-zero value sets the PRU into single-step mode irrespective + * of its previous state. The PRU mode is saved only on the first set into + * a single-step mode. Writing a zero value will restore the PRU into its + * original mode. + */ +static int pru_rproc_debug_ss_set(void *data, u64 val) +{ + struct rproc *rproc = data; + struct pru_rproc *pru = rproc->priv; + u32 reg_val; + + val = val ? 1 : 0; + if (!val && !pru->dbg_single_step) + return 0; + + reg_val = pru_control_read_reg(pru, PRU_CTRL_CTRL); + + if (val && !pru->dbg_single_step) + pru->dbg_continuous = reg_val; + + if (val) + reg_val |= CTRL_CTRL_SINGLE_STEP | CTRL_CTRL_EN; + else + reg_val = pru->dbg_continuous; + + pru->dbg_single_step = val; + pru_control_write_reg(pru, PRU_CTRL_CTRL, reg_val); + + return 0; +} + +static int pru_rproc_debug_ss_get(void *data, u64 *val) +{ + struct rproc *rproc = data; + struct pru_rproc *pru = rproc->priv; + + *val = pru->dbg_single_step; + + return 0; +} +DEFINE_SIMPLE_ATTRIBUTE(pru_rproc_debug_ss_fops, pru_rproc_debug_ss_get, + pru_rproc_debug_ss_set, "%llu\n"); + +/* + * Create PRU-specific debugfs entries + * + * The entries are created only if the parent remoteproc debugfs directory + * exists, and will be cleaned up by the remoteproc core. + */ +static void pru_rproc_create_debug_entries(struct rproc *rproc) +{ + if (!rproc->dbg_dir) + return; + + debugfs_create_file("regs", 0400, rproc->dbg_dir, + rproc, ®s_fops); + debugfs_create_file("single_step", 0600, rproc->dbg_dir, + rproc, &pru_rproc_debug_ss_fops); +} + static void pru_dispose_irq_mapping(struct pru_rproc *pru) { while (pru->evt_count--) { @@ -572,6 +706,8 @@ static int pru_rproc_probe(struct platform_device *pdev) return ret; } + pru_rproc_create_debug_entries(rproc); + dev_dbg(dev, "PRU rproc node %pOF probed successfully\n", np); return 0; From patchwork Tue Dec 8 14:10:01 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Grzegorz Jaszczyk X-Patchwork-Id: 340065 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-18.7 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_CR_TRAILER, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 49DFEC3526C for ; Tue, 8 Dec 2020 14:12:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 22FCC23B7F for ; Tue, 8 Dec 2020 14:12:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1729823AbgLHOMm (ORCPT ); Tue, 8 Dec 2020 09:12:42 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:34876 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1729822AbgLHOMl (ORCPT ); Tue, 8 Dec 2020 09:12:41 -0500 Received: from mail-lf1-x144.google.com (mail-lf1-x144.google.com [IPv6:2a00:1450:4864:20::144]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 255DCC0619DC for ; Tue, 8 Dec 2020 06:10:49 -0800 (PST) Received: by mail-lf1-x144.google.com with SMTP id m12so1587558lfo.7 for ; Tue, 08 Dec 2020 06:10:49 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=YrmPgaht3F54ekOZjpnxRQJRgPSdJ6wC/G9opJrBVN8=; b=inXM++kM5P/h1IHNIRmF9OWWtUw5y4lowenOLGJkshRcFvttw3Wc3nWDC6MYg0Bg+j 6qMf3UDd5YvznisJaBllC0lq9SVn4CO3IqGkMCDWwvNGOpfkXwE0AbNiuVdr9Qiu/ffE 5vWuF0iFRW0QDIvst4n+UZq3QkCEROfWaLSU1Zv4IARqs8ubxet5rn3ndcVh9mIUuvTb MswU9PFuUCV/rZB4wtvL6r5VCCrihH3v2C9DJhMBi4U5PyciG5TvybuRDjp+fpSEDCIg sETzUz1eCovTPMWCKaeYdUsQyOv8HnaawWVuE34RHBGX9J0Uy3e1ARD7z64/ftjYbpun hQEQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=YrmPgaht3F54ekOZjpnxRQJRgPSdJ6wC/G9opJrBVN8=; b=tnDZzhxeMLj+PEJHucBKKMpmZ6RzEDCnadl9qKAAkya/my/5zmwetQ/Uq0L/0Lz7K4 VWPTGQKhCzyopo+5JbvKPRKLrVLLGhYK6y0p0IvOv0hXLIepG0lqFhKK11QbdYDYfzts gVpbtAEjwVK0MyXZsvJiceTSgsVm9jEYbLVj0v8RDDNNWC18V0FdLfEIpVMAEAQTpPHF gg9jeS0qJcOGZnzZGqpuhCmVYHj0v+jJbre80kQiKTYzqqfp/hdnCpMvC1iTgAwEJ/M5 1+A8oBlNn5H0Z2tgQmWp+U6BIH6RiSOpSNSI4O659bwP2q8jPrKDw17q4smFVmTiIYZh 7Itw== X-Gm-Message-State: AOAM533um1nlCzN13dCCVY22Dv/q55PUEEDAVefTRGHdT2QLkuLVx9Jc I5janaVzx+3oZfPd91j2dTbOhA== X-Google-Smtp-Source: ABdhPJxeE9oobELcm/ICpJLmSov3AMZFnAz4s4rQI/lwGCOnJjhGGEAHUi5SN4i7y4Ry/Mhfe5zinw== X-Received: by 2002:a19:f80a:: with SMTP id a10mr3890840lff.36.1607436645928; Tue, 08 Dec 2020 06:10:45 -0800 (PST) Received: from gilgamesh.semihalf.com (193-106-246-138.noc.fibertech.net.pl. [193.106.246.138]) by smtp.gmail.com with ESMTPSA id h23sm417017ljh.115.2020.12.08.06.10.44 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Tue, 08 Dec 2020 06:10:45 -0800 (PST) From: Grzegorz Jaszczyk To: ohad@wizery.com, bjorn.andersson@linaro.org, mathieu.poirier@linaro.org, robh+dt@kernel.org, s-anna@ti.com Cc: grzegorz.jaszczyk@linaro.org, linux-remoteproc@vger.kernel.org, lee.jones@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, praneeth@ti.com, rogerq@ti.com Subject: [PATCH v4 5/6] remoteproc: pru: Add support for various PRU cores on K3 AM65x SoCs Date: Tue, 8 Dec 2020 15:10:01 +0100 Message-Id: <20201208141002.17777-6-grzegorz.jaszczyk@linaro.org> X-Mailer: git-send-email 2.29.0 In-Reply-To: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> References: <20201208141002.17777-1-grzegorz.jaszczyk@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org From: Suman Anna The K3 AM65x family of SoCs have the next generation of the PRU-ICSS processor subsystem, commonly referred to as ICSSG. Each ICSSG processor subsystem on AM65x SR1.0 contains two primary PRU cores and two new auxiliary PRU cores called RTUs. The AM65x SR2.0 SoCs have a revised ICSSG IP that is based off the subsequent IP revision used on J721E SoCs. This IP instance has two new custom auxiliary PRU cores called Transmit PRUs (Tx_PRUs) in addition to the existing PRUs and RTUs. Each RTU and Tx_PRU cores have their own dedicated IRAM (smaller than a PRU), Control and debug feature sets, but is different in terms of sub-modules integrated around it and does not have the full capabilities associated with a PRU core. The RTU core is typically used to aid a PRU core in accelerating data transfers, while the Tx_PRU cores is normally used to control the TX L2 FIFO if enabled in Ethernet applications. Both can also be used to run independent applications. The RTU and Tx_PRU cores though share the same Data RAMs as the PRU cores, so the memories have to be partitioned carefully between different applications. The new cores also support a new sub-module called Task Manager to support two different context thread executions. Enhance the existing PRU remoteproc driver to support these new PRU, RTU and Tx PRU cores by using specific compatibles. The initial names for the firmware images for each PRU core are retrieved from DT nodes, and can be adjusted through sysfs if required. The PRU remoteproc driver has to be specifically modified to use a custom memcpy function within its ELF loader implementation for these new cores in order to overcome a limitation with copying data into each of the core's IRAM memories. These memory ports support only 4-byte writes, and any sub-word order byte writes clear out the remaining bytes other than the bytes being written within the containing word. The default ARM64 memcpy also cannot be used as it throws an exception when the preferred 8-byte copy operation is attempted. This choice is made by using a state flag that is set only on K3 SoCs. Signed-off-by: Suman Anna Co-developed-by: Grzegorz Jaszczyk Signed-off-by: Grzegorz Jaszczyk Reviewed-by: Mathieu Poirier --- v3->v4: - No changes. v2->v3: Address Mathieu comments: - Change type of some local variable in pru_rproc_memcpy from 'int *' to 'u32 *'. At the occasion use size_t for 'size' inside mentioned function. - Add Reviewed-by: tag. v1->v2: - Update documentation of pru_rproc_memcpy() according to Suman comments. - Update documentation of is_k3 flag. --- drivers/remoteproc/pru_rproc.c | 140 ++++++++++++++++++++++++++++++--- 1 file changed, 131 insertions(+), 9 deletions(-) diff --git a/drivers/remoteproc/pru_rproc.c b/drivers/remoteproc/pru_rproc.c index 59240fd82f56..421ebbc1c02d 100644 --- a/drivers/remoteproc/pru_rproc.c +++ b/drivers/remoteproc/pru_rproc.c @@ -46,10 +46,14 @@ #define PRU_DEBUG_GPREG(x) (0x0000 + (x) * 4) #define PRU_DEBUG_CT_REG(x) (0x0080 + (x) * 4) -/* PRU Core IRAM address masks */ +/* PRU/RTU/Tx_PRU Core IRAM address masks */ #define PRU_IRAM_ADDR_MASK 0x3ffff #define PRU0_IRAM_ADDR_MASK 0x34000 #define PRU1_IRAM_ADDR_MASK 0x38000 +#define RTU0_IRAM_ADDR_MASK 0x4000 +#define RTU1_IRAM_ADDR_MASK 0x6000 +#define TX_PRU0_IRAM_ADDR_MASK 0xa000 +#define TX_PRU1_IRAM_ADDR_MASK 0xc000 /* PRU device addresses for various type of PRU RAMs */ #define PRU_IRAM_DA 0 /* Instruction RAM */ @@ -74,12 +78,38 @@ enum pru_iomem { PRU_IOMEM_MAX, }; +/** + * enum pru_type - PRU core type identifier + * + * @PRU_TYPE_PRU: Programmable Real-time Unit + * @PRU_TYPE_RTU: Auxiliary Programmable Real-Time Unit + * @PRU_TYPE_TX_PRU: Transmit Programmable Real-Time Unit + * @PRU_TYPE_MAX: just keep this one at the end + */ +enum pru_type { + PRU_TYPE_PRU = 0, + PRU_TYPE_RTU, + PRU_TYPE_TX_PRU, + PRU_TYPE_MAX, +}; + +/** + * struct pru_private_data - device data for a PRU core + * @type: type of the PRU core (PRU, RTU, Tx_PRU) + * @is_k3: flag used to identify the need for special load handling + */ +struct pru_private_data { + enum pru_type type; + unsigned int is_k3 : 1; +}; + /** * struct pru_rproc - PRU remoteproc structure * @id: id of the PRU core within the PRUSS * @dev: PRU core device pointer * @pruss: back-reference to parent PRUSS structure * @rproc: remoteproc pointer for this PRU core + * @data: PRU core specific data * @mem_regions: data for each of the PRU memory regions * @fw_name: name of firmware image used during loading * @mapped_irq: virtual interrupt numbers of created fw specific mapping @@ -94,6 +124,7 @@ struct pru_rproc { struct device *dev; struct pruss *pruss; struct rproc *rproc; + const struct pru_private_data *data; struct pruss_mem_region mem_regions[PRU_IOMEM_MAX]; const char *fw_name; unsigned int *mapped_irq; @@ -319,11 +350,12 @@ static int pru_rproc_start(struct rproc *rproc) { struct device *dev = &rproc->dev; struct pru_rproc *pru = rproc->priv; + const char *names[PRU_TYPE_MAX] = { "PRU", "RTU", "Tx_PRU" }; u32 val; int ret; - dev_dbg(dev, "starting PRU%d: entry-point = 0x%llx\n", - pru->id, (rproc->bootaddr >> 2)); + dev_dbg(dev, "starting %s%d: entry-point = 0x%llx\n", + names[pru->data->type], pru->id, (rproc->bootaddr >> 2)); ret = pru_handle_intrmap(rproc); /* @@ -345,9 +377,10 @@ static int pru_rproc_stop(struct rproc *rproc) { struct device *dev = &rproc->dev; struct pru_rproc *pru = rproc->priv; + const char *names[PRU_TYPE_MAX] = { "PRU", "RTU", "Tx_PRU" }; u32 val; - dev_dbg(dev, "stopping PRU%d\n", pru->id); + dev_dbg(dev, "stopping %s%d\n", names[pru->data->type], pru->id); val = pru_control_read_reg(pru, PRU_CTRL_CTRL); val &= ~CTRL_CTRL_EN; @@ -459,9 +492,52 @@ static struct rproc_ops pru_rproc_ops = { .da_to_va = pru_rproc_da_to_va, }; +/* + * Custom memory copy implementation for ICSSG PRU/RTU/Tx_PRU Cores + * + * The ICSSG PRU/RTU/Tx_PRU cores have a memory copying issue with IRAM + * memories, that is not seen on previous generation SoCs. The data is reflected + * properly in the IRAM memories only for integer (4-byte) copies. Any unaligned + * copies result in all the other pre-existing bytes zeroed out within that + * 4-byte boundary, thereby resulting in wrong text/code in the IRAMs. Also, the + * IRAM memory port interface does not allow any 8-byte copies (as commonly used + * by ARM64 memcpy implementation) and throws an exception. The DRAM memory + * ports do not show this behavior. + */ +static int pru_rproc_memcpy(void *dest, const void *src, size_t count) +{ + const u32 *s = src; + u32 *d = dest; + size_t size = count / 4; + u32 *tmp_src = NULL; + + /* + * TODO: relax limitation of 4-byte aligned dest addresses and copy + * sizes + */ + if ((long)dest % 4 || count % 4) + return -EINVAL; + + /* src offsets in ELF firmware image can be non-aligned */ + if ((long)src % 4) { + tmp_src = kmemdup(src, count, GFP_KERNEL); + if (!tmp_src) + return -ENOMEM; + s = tmp_src; + } + + while (size--) + *d++ = *s++; + + kfree(tmp_src); + + return 0; +} + static int pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw) { + struct pru_rproc *pru = rproc->priv; struct device *dev = &rproc->dev; struct elf32_hdr *ehdr; struct elf32_phdr *phdr; @@ -509,7 +585,17 @@ pru_rproc_load_elf_segments(struct rproc *rproc, const struct firmware *fw) break; } - memcpy(ptr, elf_data + phdr->p_offset, filesz); + if (pru->data->is_k3 && is_iram) { + ret = pru_rproc_memcpy(ptr, elf_data + phdr->p_offset, + filesz); + if (ret) { + dev_err(dev, "PRU memory copy failed for da 0x%x memsz 0x%x\n", + da, memsz); + break; + } + } else { + memcpy(ptr, elf_data + phdr->p_offset, filesz); + } /* skip the memzero logic performed by remoteproc ELF loader */ } @@ -615,9 +701,17 @@ static int pru_rproc_set_id(struct pru_rproc *pru) int ret = 0; switch (pru->mem_regions[PRU_IOMEM_IRAM].pa & PRU_IRAM_ADDR_MASK) { + case TX_PRU0_IRAM_ADDR_MASK: + fallthrough; + case RTU0_IRAM_ADDR_MASK: + fallthrough; case PRU0_IRAM_ADDR_MASK: pru->id = 0; break; + case TX_PRU1_IRAM_ADDR_MASK: + fallthrough; + case RTU1_IRAM_ADDR_MASK: + fallthrough; case PRU1_IRAM_ADDR_MASK: pru->id = 1; break; @@ -638,8 +732,13 @@ static int pru_rproc_probe(struct platform_device *pdev) struct rproc *rproc = NULL; struct resource *res; int i, ret; + const struct pru_private_data *data; const char *mem_names[PRU_IOMEM_MAX] = { "iram", "control", "debug" }; + data = of_device_get_match_data(&pdev->dev); + if (!data) + return -ENODEV; + ret = of_property_read_string(np, "firmware-name", &fw_name); if (ret) { dev_err(dev, "unable to retrieve firmware-name %d\n", ret); @@ -672,6 +771,7 @@ static int pru_rproc_probe(struct platform_device *pdev) pru = rproc->priv; pru->dev = dev; + pru->data = data; pru->pruss = platform_get_drvdata(ppdev); pru->rproc = rproc; pru->fw_name = fw_name; @@ -723,11 +823,33 @@ static int pru_rproc_remove(struct platform_device *pdev) return 0; } +static const struct pru_private_data pru_data = { + .type = PRU_TYPE_PRU, +}; + +static const struct pru_private_data k3_pru_data = { + .type = PRU_TYPE_PRU, + .is_k3 = 1, +}; + +static const struct pru_private_data k3_rtu_data = { + .type = PRU_TYPE_RTU, + .is_k3 = 1, +}; + +static const struct pru_private_data k3_tx_pru_data = { + .type = PRU_TYPE_TX_PRU, + .is_k3 = 1, +}; + static const struct of_device_id pru_rproc_match[] = { - { .compatible = "ti,am3356-pru", }, - { .compatible = "ti,am4376-pru", }, - { .compatible = "ti,am5728-pru", }, - { .compatible = "ti,k2g-pru", }, + { .compatible = "ti,am3356-pru", .data = &pru_data }, + { .compatible = "ti,am4376-pru", .data = &pru_data }, + { .compatible = "ti,am5728-pru", .data = &pru_data }, + { .compatible = "ti,k2g-pru", .data = &pru_data }, + { .compatible = "ti,am654-pru", .data = &k3_pru_data }, + { .compatible = "ti,am654-rtu", .data = &k3_rtu_data }, + { .compatible = "ti,am654-tx-pru", .data = &k3_tx_pru_data }, {}, }; MODULE_DEVICE_TABLE(of, pru_rproc_match);