From patchwork Wed Aug 12 19:50:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 253885 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9789FC433E0 for ; Wed, 12 Aug 2020 19:51:05 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6B08320781 for ; Wed, 12 Aug 2020 19:51:05 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="dVWMz+x/" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726676AbgHLTvB (ORCPT ); Wed, 12 Aug 2020 15:51:01 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:51540 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726651AbgHLTuw (ORCPT ); Wed, 12 Aug 2020 15:50:52 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 07CJobAg048091; Wed, 12 Aug 2020 14:50:37 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1597261837; bh=QFPl1LN65/3eHeMMlkcdXTLRzk1+fW3t25Tti3ejToc=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=dVWMz+x/hmZ0DZeqe2eqKMLe/2Q40JJe4YBzVwseZyl9yTSOramuJd2q9THGEw7ZL ENfzKh/u+zBjUwzWxmdS32MH/ImDvF3hShuPV7BGw0N7VnmOuGd4mGuupIaEb5h9sF jMAAAtVKaRPeiHqN3lD7Jdy1Ulzbvk/sG7sUIjJI= Received: from DFLE114.ent.ti.com (dfle114.ent.ti.com [10.64.6.35]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 07CJobtM126034; Wed, 12 Aug 2020 14:50:37 -0500 Received: from DFLE100.ent.ti.com (10.64.6.21) by DFLE114.ent.ti.com (10.64.6.35) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 12 Aug 2020 14:50:36 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DFLE100.ent.ti.com (10.64.6.21) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 12 Aug 2020 14:50:36 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 07CJoaUV109898; Wed, 12 Aug 2020 14:50:36 -0500 From: Dan Murphy To: , , , CC: , , , , Dan Murphy Subject: [PATCH v33 2/6] leds: lp50xx: Add the LP50XX family of the RGB LED driver Date: Wed, 12 Aug 2020 14:50:16 -0500 Message-ID: <20200812195020.13568-3-dmurphy@ti.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200812195020.13568-1-dmurphy@ti.com> References: <20200812195020.13568-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Introduce the LP5036/30/24/18/12/9 RGB LED driver. The difference in these parts are the number of LED outputs where the: LP5036 can control 36 LEDs LP5030 can control 30 LEDs LP5024 can control 24 LEDs LP5018 can control 18 LEDs LP5012 can control 12 LEDs LP5009 can control 9 LEDs The device has the ability to group LED outputs into control banks so that multiple LED banks can be controlled with the same mixing and brightness. Or the LED outputs can also be controlled independently. Acked-by: Jacek Anaszewski Signed-off-by: Dan Murphy --- drivers/leds/Kconfig | 11 + drivers/leds/Makefile | 1 + drivers/leds/leds-lp50xx.c | 634 +++++++++++++++++++++++++++++++++++++ 3 files changed, 646 insertions(+) create mode 100644 drivers/leds/leds-lp50xx.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 1c181df24eae..00b488915945 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -395,6 +395,17 @@ config LEDS_LP3952 To compile this driver as a module, choose M here: the module will be called leds-lp3952. +config LEDS_LP50XX + tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip" + depends on LEDS_CLASS && REGMAP_I2C + depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR + help + If you say yes here you get support for the Texas Instruments + LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver. + + To compile this driver as a module, choose M here: the + module will be called leds-lp50xx. + config LEDS_LP55XX_COMMON tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501" depends on LEDS_CLASS_MULTICOLOR || !LEDS_CLASS_MULTICOLOR diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index c2c7d7ade0d0..778cb4bb8c52 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_LEDS_LM3697) += leds-lm3697.o obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o obj-$(CONFIG_LEDS_LP3952) += leds-lp3952.o +obj-$(CONFIG_LEDS_LP50XX) += leds-lp50xx.o obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c new file mode 100644 index 000000000000..47144a37cb94 --- /dev/null +++ b/drivers/leds/leds-lp50xx.c @@ -0,0 +1,634 @@ +// SPDX-License-Identifier: GPL-2.0 +// TI LP50XX LED chip family driver +// Copyright (C) 2018-20 Texas Instruments Incorporated - https://www.ti.com/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "leds.h" + +#define LP50XX_DEV_CFG0 0x00 +#define LP50XX_DEV_CFG1 0x01 +#define LP50XX_LED_CFG0 0x02 + +/* LP5009 and LP5012 registers */ +#define LP5012_BNK_BRT 0x03 +#define LP5012_BNKA_CLR 0x04 +#define LP5012_BNKB_CLR 0x05 +#define LP5012_BNKC_CLR 0x06 +#define LP5012_LED0_BRT 0x07 +#define LP5012_OUT0_CLR 0x0b +#define LP5012_RESET 0x17 + +/* LP5018 and LP5024 registers */ +#define LP5024_BNK_BRT 0x03 +#define LP5024_BNKA_CLR 0x04 +#define LP5024_BNKB_CLR 0x05 +#define LP5024_BNKC_CLR 0x06 +#define LP5024_LED0_BRT 0x07 +#define LP5024_OUT0_CLR 0x0f +#define LP5024_RESET 0x27 + +/* LP5030 and LP5036 registers */ +#define LP5036_LED_CFG1 0x03 +#define LP5036_BNK_BRT 0x04 +#define LP5036_BNKA_CLR 0x05 +#define LP5036_BNKB_CLR 0x06 +#define LP5036_BNKC_CLR 0x07 +#define LP5036_LED0_BRT 0x08 +#define LP5036_OUT0_CLR 0x14 +#define LP5036_RESET 0x38 + +#define LP50XX_SW_RESET 0xff +#define LP50XX_CHIP_EN BIT(6) + +/* There are 3 LED outputs per bank */ +#define LP50XX_LEDS_PER_MODULE 3 + +#define LP5009_MAX_LED_MODULES 2 +#define LP5012_MAX_LED_MODULES 4 +#define LP5018_MAX_LED_MODULES 6 +#define LP5024_MAX_LED_MODULES 8 +#define LP5030_MAX_LED_MODULES 10 +#define LP5036_MAX_LED_MODULES 12 + +static const struct reg_default lp5012_reg_defs[] = { + {LP50XX_DEV_CFG0, 0x0}, + {LP50XX_DEV_CFG1, 0x3c}, + {LP50XX_LED_CFG0, 0x0}, + {LP5012_BNK_BRT, 0xff}, + {LP5012_BNKA_CLR, 0x0f}, + {LP5012_BNKB_CLR, 0x0f}, + {LP5012_BNKC_CLR, 0x0f}, + {LP5012_LED0_BRT, 0x0f}, + /* LEDX_BRT registers are all 0xff for defaults */ + {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, + {LP5012_OUT0_CLR, 0x0f}, + /* OUTX_CLR registers are all 0x0 for defaults */ + {0x0c, 0x00}, {0x0d, 0x00}, {0x0e, 0x00}, {0x0f, 0x00}, {0x10, 0x00}, + {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, {0x15, 0x00}, + {0x16, 0x00}, + {LP5012_RESET, 0x00} +}; + +static const struct reg_default lp5024_reg_defs[] = { + {LP50XX_DEV_CFG0, 0x0}, + {LP50XX_DEV_CFG1, 0x3c}, + {LP50XX_LED_CFG0, 0x0}, + {LP5024_BNK_BRT, 0xff}, + {LP5024_BNKA_CLR, 0x0f}, + {LP5024_BNKB_CLR, 0x0f}, + {LP5024_BNKC_CLR, 0x0f}, + {LP5024_LED0_BRT, 0x0f}, + /* LEDX_BRT registers are all 0xff for defaults */ + {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff}, + {0x0d, 0xff}, {0x0e, 0xff}, + {LP5024_OUT0_CLR, 0x0f}, + /* OUTX_CLR registers are all 0x0 for defaults */ + {0x10, 0x00}, {0x11, 0x00}, {0x12, 0x00}, {0x13, 0x00}, {0x14, 0x00}, + {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00}, + {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00}, + {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00}, + {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, + {LP5024_RESET, 0x00} +}; + +static const struct reg_default lp5036_reg_defs[] = { + {LP50XX_DEV_CFG0, 0x0}, + {LP50XX_DEV_CFG1, 0x3c}, + {LP50XX_LED_CFG0, 0x0}, + {LP5036_LED_CFG1, 0x0}, + {LP5036_BNK_BRT, 0xff}, + {LP5036_BNKA_CLR, 0x0f}, + {LP5036_BNKB_CLR, 0x0f}, + {LP5036_BNKC_CLR, 0x0f}, + {LP5036_LED0_BRT, 0x0f}, + /* LEDX_BRT registers are all 0xff for defaults */ + {0x08, 0xff}, {0x09, 0xff}, {0x0a, 0xff}, {0x0b, 0xff}, {0x0c, 0xff}, + {0x0d, 0xff}, {0x0e, 0xff}, {0x0f, 0xff}, {0x10, 0xff}, {0x11, 0xff}, + {0x12, 0xff}, {0x13, 0xff}, + {LP5036_OUT0_CLR, 0x0f}, + /* OUTX_CLR registers are all 0x0 for defaults */ + {0x15, 0x00}, {0x16, 0x00}, {0x17, 0x00}, {0x18, 0x00}, {0x19, 0x00}, + {0x1a, 0x00}, {0x1b, 0x00}, {0x1c, 0x00}, {0x1d, 0x00}, {0x1e, 0x00}, + {0x1f, 0x00}, {0x20, 0x00}, {0x21, 0x00}, {0x22, 0x00}, {0x23, 0x00}, + {0x24, 0x00}, {0x25, 0x00}, {0x26, 0x00}, {0x27, 0x00}, {0x28, 0x00}, + {0x29, 0x00}, {0x2a, 0x00}, {0x2b, 0x00}, {0x2c, 0x00}, {0x2d, 0x00}, + {0x2e, 0x00}, {0x2f, 0x00}, {0x30, 0x00}, {0x31, 0x00}, {0x32, 0x00}, + {0x33, 0x00}, {0x34, 0x00}, {0x35, 0x00}, {0x36, 0x00}, {0x37, 0x00}, + {LP5036_RESET, 0x00} +}; + +static const struct regmap_config lp5012_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LP5012_RESET, + .reg_defaults = lp5012_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lp5012_reg_defs), + .cache_type = REGCACHE_FLAT, +}; + +static const struct regmap_config lp5024_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LP5024_RESET, + .reg_defaults = lp5024_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lp5024_reg_defs), + .cache_type = REGCACHE_FLAT, +}; + +static const struct regmap_config lp5036_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = LP5036_RESET, + .reg_defaults = lp5036_reg_defs, + .num_reg_defaults = ARRAY_SIZE(lp5036_reg_defs), + .cache_type = REGCACHE_FLAT, +}; + +enum lp50xx_model { + LP5009, + LP5012, + LP5018, + LP5024, + LP5030, + LP5036, +}; + +/** + * struct lp50xx_chip_info - + * @lp50xx_regmap_config: regmap register configuration + * @model_id: LED device model + * @max_modules: total number of supported LED modules + * @num_leds: number of LED outputs available on the device + * @led_brightness0_reg: first brightness register of the device + * @mix_out0_reg: first color mix register of the device + * @bank_brt_reg: bank brightness register + * @bank_mix_reg: color mix register + * @reset_reg: device reset register + */ +struct lp50xx_chip_info { + const struct regmap_config *lp50xx_regmap_config; + int model_id; + u8 max_modules; + u8 num_leds; + u8 led_brightness0_reg; + u8 mix_out0_reg; + u8 bank_brt_reg; + u8 bank_mix_reg; + u8 reset_reg; +}; + +static const struct lp50xx_chip_info lp50xx_chip_info_tbl[] = { + [LP5009] = { + .model_id = LP5009, + .max_modules = LP5009_MAX_LED_MODULES, + .num_leds = LP5009_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, + .led_brightness0_reg = LP5012_LED0_BRT, + .mix_out0_reg = LP5012_OUT0_CLR, + .bank_brt_reg = LP5012_BNK_BRT, + .bank_mix_reg = LP5012_BNKA_CLR, + .reset_reg = LP5012_RESET, + .lp50xx_regmap_config = &lp5012_regmap_config, + }, + [LP5012] = { + .model_id = LP5012, + .max_modules = LP5012_MAX_LED_MODULES, + .num_leds = LP5012_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, + .led_brightness0_reg = LP5012_LED0_BRT, + .mix_out0_reg = LP5012_OUT0_CLR, + .bank_brt_reg = LP5012_BNK_BRT, + .bank_mix_reg = LP5012_BNKA_CLR, + .reset_reg = LP5012_RESET, + .lp50xx_regmap_config = &lp5012_regmap_config, + }, + [LP5018] = { + .model_id = LP5018, + .max_modules = LP5018_MAX_LED_MODULES, + .num_leds = LP5018_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, + .led_brightness0_reg = LP5024_LED0_BRT, + .mix_out0_reg = LP5024_OUT0_CLR, + .bank_brt_reg = LP5024_BNK_BRT, + .bank_mix_reg = LP5024_BNKA_CLR, + .reset_reg = LP5024_RESET, + .lp50xx_regmap_config = &lp5024_regmap_config, + }, + [LP5024] = { + .model_id = LP5024, + .max_modules = LP5024_MAX_LED_MODULES, + .num_leds = LP5024_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, + .led_brightness0_reg = LP5024_LED0_BRT, + .mix_out0_reg = LP5024_OUT0_CLR, + .bank_brt_reg = LP5024_BNK_BRT, + .bank_mix_reg = LP5024_BNKA_CLR, + .reset_reg = LP5024_RESET, + .lp50xx_regmap_config = &lp5024_regmap_config, + }, + [LP5030] = { + .model_id = LP5030, + .max_modules = LP5030_MAX_LED_MODULES, + .num_leds = LP5030_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, + .led_brightness0_reg = LP5036_LED0_BRT, + .mix_out0_reg = LP5036_OUT0_CLR, + .bank_brt_reg = LP5036_BNK_BRT, + .bank_mix_reg = LP5036_BNKA_CLR, + .reset_reg = LP5036_RESET, + .lp50xx_regmap_config = &lp5036_regmap_config, + }, + [LP5036] = { + .model_id = LP5036, + .max_modules = LP5036_MAX_LED_MODULES, + .num_leds = LP5036_MAX_LED_MODULES * LP50XX_LEDS_PER_MODULE, + .led_brightness0_reg = LP5036_LED0_BRT, + .mix_out0_reg = LP5036_OUT0_CLR, + .bank_brt_reg = LP5036_BNK_BRT, + .bank_mix_reg = LP5036_BNKA_CLR, + .reset_reg = LP5036_RESET, + .lp50xx_regmap_config = &lp5036_regmap_config, + }, +}; + +struct lp50xx_led { + struct led_classdev_mc mc_cdev; + struct lp50xx *priv; + unsigned long bank_modules; + int led_intensity[LP50XX_LEDS_PER_MODULE]; + u8 ctrl_bank_enabled; + int led_number; +}; + +/** + * struct lp50xx - + * @enable_gpio: hardware enable gpio + * @regulator: LED supply regulator pointer + * @client: pointer to the I2C client + * @regmap: device register map + * @dev: pointer to the devices device struct + * @lock: lock for reading/writing the device + * @chip_info: chip specific information (ie num_leds) + * @num_of_banked_leds: holds the number of banked LEDs + * @leds: array of LED strings + */ +struct lp50xx { + struct gpio_desc *enable_gpio; + struct regulator *regulator; + struct i2c_client *client; + struct regmap *regmap; + struct device *dev; + struct mutex lock; + const struct lp50xx_chip_info *chip_info; + int num_of_banked_leds; + + /* This needs to be at the end of the struct */ + struct lp50xx_led leds[]; +}; + +static struct lp50xx_led *mcled_cdev_to_led(struct led_classdev_mc *mc_cdev) +{ + return container_of(mc_cdev, struct lp50xx_led, mc_cdev); +} + +static int lp50xx_brightness_set(struct led_classdev *cdev, + enum led_brightness brightness) +{ + struct led_classdev_mc *mc_dev = lcdev_to_mccdev(cdev); + struct lp50xx_led *led = mcled_cdev_to_led(mc_dev); + const struct lp50xx_chip_info *led_chip = led->priv->chip_info; + u8 led_offset, reg_val; + int ret = 0; + int i; + + mutex_lock(&led->priv->lock); + if (led->ctrl_bank_enabled) + reg_val = led_chip->bank_brt_reg; + else + reg_val = led_chip->led_brightness0_reg + + led->led_number; + + ret = regmap_write(led->priv->regmap, reg_val, brightness); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot write brightness value %d\n", ret); + goto out; + } + + for (i = 0; i < led->mc_cdev.num_colors; i++) { + if (led->ctrl_bank_enabled) { + reg_val = led_chip->bank_mix_reg + i; + } else { + led_offset = (led->led_number * 3) + i; + reg_val = led_chip->mix_out0_reg + led_offset; + } + + ret = regmap_write(led->priv->regmap, reg_val, + mc_dev->subled_info[i].intensity); + if (ret) { + dev_err(&led->priv->client->dev, + "Cannot write intensity value %d\n", ret); + goto out; + } + } +out: + mutex_unlock(&led->priv->lock); + return ret; +} + +static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[]) +{ + u8 led_config_lo, led_config_hi; + u32 bank_enable_mask = 0; + int ret; + int i; + + for (i = 0; i < priv->chip_info->max_modules; i++) { + if (led_banks[i]) + bank_enable_mask |= (1 << led_banks[i]); + } + + led_config_lo = (u8)(bank_enable_mask & 0xff); + led_config_hi = (u8)(bank_enable_mask >> 8) & 0xff; + + ret = regmap_write(priv->regmap, LP50XX_LED_CFG0, led_config_lo); + if (ret) + return ret; + + if (priv->chip_info->model_id >= LP5030) + ret = regmap_write(priv->regmap, LP5036_LED_CFG1, led_config_hi); + + return ret; +} + +static int lp50xx_reset(struct lp50xx *priv) +{ + return regmap_write(priv->regmap, priv->chip_info->reset_reg, LP50XX_SW_RESET); +} + +static int lp50xx_enable_disable(struct lp50xx *priv, int enable_disable) +{ + int ret; + + if (priv->enable_gpio) { + ret = gpiod_direction_output(priv->enable_gpio, enable_disable); + if (ret) + return ret; + } + + if (enable_disable) + return regmap_write(priv->regmap, LP50XX_DEV_CFG0, LP50XX_CHIP_EN); + else + return regmap_write(priv->regmap, LP50XX_DEV_CFG0, 0); + +} + +static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv, + struct lp50xx_led *led, int num_leds) +{ + u32 led_banks[LP5036_MAX_LED_MODULES] = {0}; + int led_number; + int ret; + + if (num_leds > 1) { + if (num_leds > priv->chip_info->max_modules) { + dev_err(&priv->client->dev, "reg property is invalid\n"); + return -EINVAL; + } + + priv->num_of_banked_leds = num_leds; + + ret = fwnode_property_read_u32_array(child, "reg", led_banks, num_leds); + if (ret) { + dev_err(&priv->client->dev, "reg property is missing\n"); + return ret; + } + + ret = lp50xx_set_banks(priv, led_banks); + if (ret) { + dev_err(&priv->client->dev, "Cannot setup banked LEDs\n"); + return ret; + } + + led->ctrl_bank_enabled = 1; + } else { + ret = fwnode_property_read_u32(child, "reg", &led_number); + if (ret) { + dev_err(&priv->client->dev, "led reg property missing\n"); + return ret; + } + + if (led_number > priv->chip_info->num_leds) { + dev_err(&priv->client->dev, "led-sources property is invalid\n"); + return -EINVAL; + } + + led->led_number = led_number; + } + + return 0; +} + +static int lp50xx_probe_dt(struct lp50xx *priv) +{ + struct fwnode_handle *child = NULL; + struct fwnode_handle *led_node = NULL; + struct led_init_data init_data = {}; + struct led_classdev *led_cdev; + struct mc_subled *mc_led_info; + struct lp50xx_led *led; + int ret = -EINVAL; + int num_colors; + u32 color_id; + int i = 0; + + priv->enable_gpio = devm_gpiod_get_optional(priv->dev, "enable", GPIOD_OUT_LOW); + if (IS_ERR(priv->enable_gpio)) { + ret = PTR_ERR(priv->enable_gpio); + dev_err(&priv->client->dev, "Failed to get enable gpio: %d\n", + ret); + return ret; + } + + priv->regulator = devm_regulator_get(priv->dev, "vled"); + if (IS_ERR(priv->regulator)) + priv->regulator = NULL; + + device_for_each_child_node(priv->dev, child) { + led = &priv->leds[i]; + ret = fwnode_property_count_u32(child, "reg"); + if (ret < 0) { + dev_err(&priv->client->dev, "reg property is invalid\n"); + goto child_out; + } + + ret = lp50xx_probe_leds(child, priv, led, ret); + if (ret) + goto child_out; + + init_data.fwnode = child; + num_colors = 0; + + /* + * There are only 3 LEDs per module otherwise they should be + * banked which also is presented as 3 LEDs. + */ + mc_led_info = devm_kcalloc(priv->dev, LP50XX_LEDS_PER_MODULE, + sizeof(*mc_led_info), GFP_KERNEL); + if (!mc_led_info) + return -ENOMEM; + + fwnode_for_each_child_node(child, led_node) { + ret = fwnode_property_read_u32(led_node, "color", + &color_id); + if (ret) { + dev_err(priv->dev, "Cannot read color\n"); + goto child_out; + } + + mc_led_info[num_colors].color_index = color_id; + num_colors++; + } + + led->priv = priv; + led->mc_cdev.num_colors = num_colors; + led->mc_cdev.subled_info = mc_led_info; + led_cdev = &led->mc_cdev.led_cdev; + led_cdev->brightness_set_blocking = lp50xx_brightness_set; + + fwnode_property_read_string(child, "linux,default-trigger", + &led_cdev->default_trigger); + + ret = devm_led_classdev_multicolor_register_ext(&priv->client->dev, + &led->mc_cdev, + &init_data); + if (ret) { + dev_err(&priv->client->dev, "led register err: %d\n", + ret); + goto child_out; + } + i++; + fwnode_handle_put(child); + } + + return 0; + +child_out: + fwnode_handle_put(child); + return ret; +} + +static int lp50xx_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct lp50xx *led; + int count; + int ret; + + count = device_get_child_node_count(&client->dev); + if (!count) { + dev_err(&client->dev, "LEDs are not defined in device tree!"); + return -ENODEV; + } + + led = devm_kzalloc(&client->dev, struct_size(led, leds, count), + GFP_KERNEL); + if (!led) + return -ENOMEM; + + mutex_init(&led->lock); + led->client = client; + led->dev = &client->dev; + led->chip_info = &lp50xx_chip_info_tbl[id->driver_data]; + i2c_set_clientdata(client, led); + led->regmap = devm_regmap_init_i2c(client, + led->chip_info->lp50xx_regmap_config); + if (IS_ERR(led->regmap)) { + ret = PTR_ERR(led->regmap); + dev_err(&client->dev, "Failed to allocate register map: %d\n", + ret); + return ret; + } + + ret = lp50xx_reset(led); + if (ret) + return ret; + + ret = lp50xx_enable_disable(led, 1); + if (ret) + return ret; + + return lp50xx_probe_dt(led); +} + +static int lp50xx_remove(struct i2c_client *client) +{ + struct lp50xx *led = i2c_get_clientdata(client); + int ret; + + ret = lp50xx_enable_disable(led, 0); + if (ret) { + dev_err(&led->client->dev, "Failed to disable chip\n"); + return ret; + } + + if (led->regulator) { + ret = regulator_disable(led->regulator); + if (ret) + dev_err(&led->client->dev, + "Failed to disable regulator\n"); + } + + mutex_destroy(&led->lock); + + return 0; +} + +static const struct i2c_device_id lp50xx_id[] = { + { "lp5009", LP5009 }, + { "lp5012", LP5012 }, + { "lp5018", LP5018 }, + { "lp5024", LP5024 }, + { "lp5030", LP5030 }, + { "lp5036", LP5036 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, lp50xx_id); + +static const struct of_device_id of_lp50xx_leds_match[] = { + { .compatible = "ti,lp5009", .data = (void *)LP5009 }, + { .compatible = "ti,lp5012", .data = (void *)LP5012 }, + { .compatible = "ti,lp5018", .data = (void *)LP5018 }, + { .compatible = "ti,lp5024", .data = (void *)LP5024 }, + { .compatible = "ti,lp5030", .data = (void *)LP5030 }, + { .compatible = "ti,lp5036", .data = (void *)LP5036 }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_lp50xx_leds_match); + +static struct i2c_driver lp50xx_driver = { + .driver = { + .name = "lp50xx", + .of_match_table = of_lp50xx_leds_match, + }, + .probe = lp50xx_probe, + .remove = lp50xx_remove, + .id_table = lp50xx_id, +}; +module_i2c_driver(lp50xx_driver); + +MODULE_DESCRIPTION("Texas Instruments LP50XX LED driver"); +MODULE_AUTHOR("Dan Murphy "); +MODULE_LICENSE("GPL v2"); From patchwork Wed Aug 12 19:50:18 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 253886 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id F3148C433DF for ; Wed, 12 Aug 2020 19:50:58 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D4EAA2080C for ; Wed, 12 Aug 2020 19:50:58 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="rtWKptdF" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726691AbgHLTu5 (ORCPT ); Wed, 12 Aug 2020 15:50:57 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:51554 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726676AbgHLTu4 (ORCPT ); Wed, 12 Aug 2020 15:50:56 -0400 Received: from fllv0034.itg.ti.com ([10.64.40.246]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 07CJogaf048099; Wed, 12 Aug 2020 14:50:42 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1597261842; bh=2z7xNwdfXWieXVOs4evBowBdnRnrrLXJvVMfLZeYFcQ=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=rtWKptdFbOtulEK9S7fi+zBa6kldP5e8Xgkm0gGCK2EcjHVvgPXnB0C2Z6kYMIOzW Gg0fwIi8okMFtn9XXfV30RNtVFF8If5teXJG8s0NJWOCFMWxAyVBfCJExckJo7zx3t dfcqLCykGUUNEoo/jlFwPCf76VQfB2XpGUd6IgQs= Received: from DFLE109.ent.ti.com (dfle109.ent.ti.com [10.64.6.30]) by fllv0034.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 07CJogRx080151 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 12 Aug 2020 14:50:42 -0500 Received: from DFLE110.ent.ti.com (10.64.6.31) by DFLE109.ent.ti.com (10.64.6.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 12 Aug 2020 14:50:42 -0500 Received: from fllv0040.itg.ti.com (10.64.41.20) by DFLE110.ent.ti.com (10.64.6.31) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 12 Aug 2020 14:50:42 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0040.itg.ti.com (8.15.2/8.15.2) with ESMTP id 07CJog0I088076; Wed, 12 Aug 2020 14:50:42 -0500 From: Dan Murphy To: , , , CC: , , , , Dan Murphy , Tony Lindgren , =?utf-8?q?Beno=C3=AEt_Cousson?= Subject: [PATCH v33 4/6] ARM: dts: n900: Add reg property to the LP5523 channel node Date: Wed, 12 Aug 2020 14:50:18 -0500 Message-ID: <20200812195020.13568-5-dmurphy@ti.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200812195020.13568-1-dmurphy@ti.com> References: <20200812195020.13568-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy Acked-by: Tony Lindgren CC: Tony Lindgren CC: "BenoƮt Cousson" Acked-by: Pavel Machek --- arch/arm/boot/dts/omap3-n900.dts | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts index 4089d97405c9..ebe93b06b4f7 100644 --- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -618,63 +618,74 @@ indicator { }; lp5523: lp5523@32 { + #address-cells = <1>; + #size-cells = <0>; compatible = "national,lp5523"; reg = <0x32>; clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */ enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */ - chan0 { + chan@0 { chan-name = "lp5523:kb1"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <0>; }; - chan1 { + chan@1 { chan-name = "lp5523:kb2"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <1>; }; - chan2 { + chan@2 { chan-name = "lp5523:kb3"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <2>; }; - chan3 { + chan@3 { chan-name = "lp5523:kb4"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <3>; }; - chan4 { + chan@4 { chan-name = "lp5523:b"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <4>; }; - chan5 { + chan@5 { chan-name = "lp5523:g"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <5>; }; - chan6 { + chan@6 { chan-name = "lp5523:r"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <6>; }; - chan7 { + chan@7 { chan-name = "lp5523:kb5"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <7>; }; - chan8 { + chan@8 { chan-name = "lp5523:kb6"; led-cur = /bits/ 8 <50>; max-cur = /bits/ 8 <100>; + reg = <8>; }; }; From patchwork Wed Aug 12 19:50:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Murphy X-Patchwork-Id: 253884 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.1 required=3.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 66602C433E0 for ; Wed, 12 Aug 2020 19:51:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 47D1D214F1 for ; Wed, 12 Aug 2020 19:51:17 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="Yy0O/4F0" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726686AbgHLTvO (ORCPT ); Wed, 12 Aug 2020 15:51:14 -0400 Received: from fllv0015.ext.ti.com ([198.47.19.141]:51570 "EHLO fllv0015.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726639AbgHLTvG (ORCPT ); Wed, 12 Aug 2020 15:51:06 -0400 Received: from lelv0266.itg.ti.com ([10.180.67.225]) by fllv0015.ext.ti.com (8.15.2/8.15.2) with ESMTP id 07CJoque048116; Wed, 12 Aug 2020 14:50:52 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1597261852; bh=5DtYodbcELFvKoyVfWIDGdKf8jLd3lr9u9RLJrv6ZxA=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=Yy0O/4F0Uv6NdHRgGj4vlQfkKThq/zImKb+p+/ZN9D7LX3e09KnHZhyjAMmcIjEQq yRNocdJGGgIDknFtCaY9+XkRAGF3iYVmoUIpGzxmgOV3mYH6aGRCbj8ru5yNbEpewV x4HaNNK/ofC8x1iAlkWPpqb2tyrUviczPe9kJZWs= Received: from DLEE113.ent.ti.com (dlee113.ent.ti.com [157.170.170.24]) by lelv0266.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 07CJoqeQ048977 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 12 Aug 2020 14:50:52 -0500 Received: from DLEE115.ent.ti.com (157.170.170.26) by DLEE113.ent.ti.com (157.170.170.24) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Wed, 12 Aug 2020 14:50:52 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DLEE115.ent.ti.com (157.170.170.26) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Wed, 12 Aug 2020 14:50:52 -0500 Received: from localhost (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 07CJoqJB110063; Wed, 12 Aug 2020 14:50:52 -0500 From: Dan Murphy To: , , , CC: , , , , Dan Murphy , Linus Walleij Subject: [PATCH v33 6/6] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes Date: Wed, 12 Aug 2020 14:50:20 -0500 Message-ID: <20200812195020.13568-7-dmurphy@ti.com> X-Mailer: git-send-email 2.27.0 In-Reply-To: <20200812195020.13568-1-dmurphy@ti.com> References: <20200812195020.13568-1-dmurphy@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add the reg property to each channel node. This update is to accommodate the multicolor framework. In addition to the accommodation this allows the LEDs to be placed on any channel and allow designs to skip channels as opposed to requiring sequential order. Signed-off-by: Dan Murphy CC: Linus Walleij Acked-by: Pavel Machek --- arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index 33e3b0b3c53d..ff47cbf6ed3b 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -58,16 +58,21 @@ lp5521@33 { reg = <0x33>; label = "lp5521_pri"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; linux,default-trigger = "heartbeat"; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; @@ -77,15 +82,20 @@ lp5521@34 { reg = <0x34>; label = "lp5521_sec"; clock-mode = /bits/ 8 <2>; - chan0 { + #address-cells = <1>; + #size-cells = <0>; + chan@0 { + reg = <0>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan1 { + chan@1 { + reg = <1>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; }; - chan2 { + chan@2 { + reg = <2>; led-cur = /bits/ 8 <0x2f>; max-cur = /bits/ 8 <0x5f>; };