From patchwork Fri Aug 28 20:40:50 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rob Clark X-Patchwork-Id: 250501 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,FREEMAIL_FORGED_FROMDOMAIN,FREEMAIL_FROM, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY, SPF_HELO_NONE, SPF_PASS, UNWANTED_LANGUAGE_BODY, USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2C046C433E2 for ; Fri, 28 Aug 2020 20:40:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E6E072087D for ; Fri, 28 Aug 2020 20:40:18 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="sgo1zj+4" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726839AbgH1UkS (ORCPT ); Fri, 28 Aug 2020 16:40:18 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57148 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726828AbgH1UkC (ORCPT ); Fri, 28 Aug 2020 16:40:02 -0400 Received: from mail-pj1-x1043.google.com (mail-pj1-x1043.google.com [IPv6:2607:f8b0:4864:20::1043]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 08E85C061232; Fri, 28 Aug 2020 13:40:02 -0700 (PDT) Received: by mail-pj1-x1043.google.com with SMTP id 2so118756pjx.5; Fri, 28 Aug 2020 13:40:02 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20161025; h=from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=5WMFzrNb9Ljl+Cp+A6l+ISHqclwT8ClYZpvGIEv4pRk=; b=sgo1zj+4Cn/9TNJBf+fC7czm84VL0cTaOX0kz5V7e4vtikzdXU/bq15NqbaEgm6ysU f575hkRDTkAaaVUgnuKKrhcRBbuyw2Z8wjSVcClWftJpEsd/bITyAT+w1RDwN6kbbl9x 02OwYl27F0MqT34JXKtKFSgm/e/OKX4XW4cH93Te7qziKmRUFgk7U59sUFsA09MeEMPS ujHI75XIqd+f64t5n8iqwFp63pjfcv+PCOxfn40XUNdca3yWs38tfZV1I9XV0ENQ0vaa BvYOazngneLnfkB/Ur+9Fn+45LFQNup2gsZj8/DrhjMML8Eqa2H+2PQLXcyUTSmhkAzI b/jA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:mime-version :content-transfer-encoding; bh=5WMFzrNb9Ljl+Cp+A6l+ISHqclwT8ClYZpvGIEv4pRk=; b=p7i01sguqmNqHiiLg2JtNQfnF3JvaszWIQmWDQ5FG5Lh9SvEj8q0AK6ErIJAkmWEf4 yLBosoP5l81OHTycHPBAlx8UONlYLMQkjYf2qg1+Mja+QIoIxp0VjtGJuihyxMUVpsgk azxrGso7jxojxTEzcwZN/hMaNZhZ4xLOXog3a3TFEDEknne4zKvLk0Yh+x+bdr7+zBcm zB2wxf7s8hgMEVeEVYMHfa0AkC57w98LKNRvkfCpmV9xEYQoShd8pmhLfK1fEAKGA151 qMwH/81kt3sDcCTv0To5qcUr8du0OiqdpcpnYVKPkWqD7FwUfaX2bsmuS0dUTV9XW+6J sgQQ== X-Gm-Message-State: AOAM532aIvN8mDaSffvs9FG6kKanMWvm1p4hVnEoPr3/xQ2OBkLuk8R9 g77T11RcJpZ96dJIxYCg+qWgv1GXM6rCOw== X-Google-Smtp-Source: ABdhPJylXJ45zWpmljiJkTs1QVmtrWkj1XyPBOyxupYDIfHMnkRZLE1nbd4veoHVi1O1LlI6uZJ23Q== X-Received: by 2002:a17:902:ed09:: with SMTP id b9mr525552pld.118.1598647199644; Fri, 28 Aug 2020 13:39:59 -0700 (PDT) Received: from localhost ([2601:1c0:5200:a6:307:a401:7b76:c6e5]) by smtp.gmail.com with ESMTPSA id r33sm319468pgm.75.2020.08.28.13.39.57 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Fri, 28 Aug 2020 13:39:58 -0700 (PDT) From: Rob Clark To: linux-arm-msm@vger.kernel.org Cc: Rob Clark , Stephen Boyd , Douglas Anderson , Matthias Kaehlcke , Atul Dhudase , Venkata Lakshmi Narayana Gubba , Evan Green , Cheng-Yi Chiang , Ajit Pandey , Alexandru Stan , Sujit Kautkar , Andy Gross , Bjorn Andersson , Rob Herring , devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v3] arm64: dts: qcom: sc7180-trogdor: add initial trogdor and lazor dt Date: Fri, 28 Aug 2020 13:40:50 -0700 Message-Id: <20200828204052.2085508-1-robdclark@gmail.com> X-Mailer: git-send-email 2.26.2 MIME-Version: 1.0 Sender: linux-arm-msm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Rob Clark This is essentialy a squash of a bunch of history of trogdor and lazor dt updates from the chromium kernel tree. I don't claim any credit other than wanting to more easily boot upstream kernel on these devices. I've tried to add cc tags for all the original authors. Cc: Stephen Boyd Cc: Douglas Anderson Cc: Matthias Kaehlcke Cc: Atul Dhudase Cc: Venkata Lakshmi Narayana Gubba Cc: Evan Green Cc: Cheng-Yi Chiang Cc: Ajit Pandey Cc: Alexandru Stan Cc: Sujit Kautkar Signed-off-by: Rob Clark Reviewed-by: Douglas Anderson Reviewed-by: Stephen Boyd --- v2: update for Stephen and Doug's comments v3: correct wifi node properly (Doug) arch/arm64/boot/dts/qcom/Makefile | 5 + .../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 24 + .../dts/qcom/sc7180-trogdor-lazor-r1-lte.dts | 18 + .../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 15 + .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 192 +++ .../boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi | 15 + .../boot/dts/qcom/sc7180-trogdor-r1-lte.dts | 14 + .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 191 +++ arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 1348 +++++++++++++++++ 9 files changed, 1822 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index dc22d8a9fd2d..afee730d93e5 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -20,6 +20,11 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts new file mode 100644 index 000000000000..ae4c23a4fe65 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts @@ -0,0 +1,24 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev0)"; + compatible = "google,lazor-rev0", "qcom,sc7180"; +}; + +&sn65dsi86_out { + /* + * Lane 0 was incorrectly mapped on the cable, but we've now decided + * that the cable is canon and in -rev1+ we'll make a board change + * that means we no longer need the swizzle. + */ + lane-polarities = <1 0>; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts new file mode 100644 index 000000000000..73e59cf7752a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1-lte.dts @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-lazor-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Lazor (rev1+) with LTE"; + compatible = "google,lazor-sku0", "qcom,sc7180"; +}; + +&keyboard_backlight { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts new file mode 100644 index 000000000000..3151ae31c1cc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-lazor.dtsi" + +/ { + model = "Google Lazor (rev1+)"; + compatible = "google,lazor", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi new file mode 100644 index 000000000000..180ef9e04306 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -0,0 +1,192 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Lazor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/ { + panel: panel { + compatible = "boe,nv133fhm-n62"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +&ap_sar_sensor { + status = "okay"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + post-power-on-delay-ms = <20>; + hid-descr-addr = <0x0001>; + + vdd-supply = <&pp3300_ts>; + }; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&ts_reset_l { + pinconf { + /* This pin is not connected on -rev0, pull up to park. */ + /delete-property/bias-disable; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "", + "", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "AP_RAM_ID2", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "", + "AP_RAM_ID1", + "AP_SKU_ID2", + "", + "", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "AP_RAM_ID0", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "TRACKPAD_INT_1V8_ODL", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "DBG_SPI_HOLD_L", + "AP_SPI_CS0_L", + "", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "", + "", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "AP_SKU_ID0", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi new file mode 100644 index 000000000000..44956e3165a1 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor dts fragment for LTE SKUs + * + * Copyright 2020 Google LLC. + */ + +&ap_sar_sensor { + label = "proximity-wifi-lte"; +}; + +&remoteproc_mpss { + firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", + "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts new file mode 100644 index 000000000000..1123c02bd539 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1-lte.dts @@ -0,0 +1,14 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor board device tree source + * + * Copyright 2020 Google LLC. + */ + +#include "sc7180-trogdor-r1.dts" +#include "sc7180-trogdor-lte-sku.dtsi" + +/ { + model = "Google Trogdor (rev1+) with LTE"; + compatible = "google,trogdor-sku0", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts new file mode 100644 index 000000000000..0a281c24841c --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor board device tree source + * + * Copyright 2020 Google LLC. + */ + +/dts-v1/; + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/ { + model = "Google Trogdor (rev1+)"; + compatible = "google,trogdor", "qcom,sc7180"; + + panel: panel { + compatible = "auo,b116xa01"; + power-supply = <&pp3300_dx_edp>; + backlight = <&backlight>; + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>; + + ports { + port { + panel_in_edp: endpoint { + remote-endpoint = <&sn65dsi86_out>; + }; + }; + }; + }; +}; + +&ap_sar_sensor_i2c { + /* Not hooked up */ + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@10 { + compatible = "elan,ekth3500"; + reg = <0x10>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + vcc33-supply = <&pp3300_ts>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + }; +}; + +&sdhc_2 { + status = "okay"; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "ESIM_MISO", + "ESIM_MOSI", + "ESIM_CLK", + "ESIM_CS_L", + "FP_TO_AP_IRQ_L", + "FP_RST_L", + "AP_TP_I2C_SDA", + "AP_TP_I2C_SCL", + "TS_RESET_L", + "TS_INT_L", + "FPMCU_BOOT0", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "", + "", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "HUB_RST_L", + "PEN_RST_ODL", + "AP_RAM_ID1", + "AP_RAM_ID2", + "PEN_IRQ_L", + "FPMCU_SEL", + "AMP_EN", + "P_SENSOR_INT_L", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "", + "HP_IRQ", + "AP_RAM_ID0", + "EN_PP3300_DX_EDP", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "", + "", + "", + "", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "", + "", + "AMP_DIN", + "PEN_PDCT_L", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "TRACKPAD_INT_1V8_ODL", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "DBG_SPI_HOLD_L", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "", + "", + "UIM2_DATA", + "UIM2_CLK", + "UIM2_RST", + "UIM2_PRESENT", + "UIM1_DATA", + "UIM1_CLK", + "UIM1_RST", + "", + "EN_PP3300_CODEC", + "EN_PP3300_HUB", + "", + "AP_SPI_FP_MISO", + "AP_SPI_FP_MOSI", + "AP_SPI_FP_CLK", + "AP_SPI_FP_CS_L", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "AP_SKU_ID0", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi new file mode 100644 index 000000000000..a6b9beb29be9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -0,0 +1,1348 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Trogdor device tree source (common between revisions) + * + * Copyright 2019 Google LLC. + */ + +#include +#include +#include + +/* PMICs depend on spmi_bus label and so must come after SoC */ +#include "pm6150.dtsi" +#include "pm6150l.dtsi" + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &aop_mem; +/delete-node/ &sec_apps_mem; +/delete-node/ &tz_mem; + +/* Increase the size from 2MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x84400000 0x0 0x800000>; +}; + +/ { + reserved-memory { + atf_mem: memory@80b00000 { + reg = <0x0 0x80b00000 0x0 0x100000>; + no-map; + }; + + mpss_mem: memory@86000000 { + reg = <0x0 0x86000000 0x0 0x8c00000>; + no-map; + }; + + camera_mem: memory@8ec00000 { + reg = <0x0 0x8ec00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8f600000 { + reg = <0 0x8f600000 0 0x500000>; + no-map; + }; + + wlan_mem: memory@94100000 { + reg = <0x0 0x94100000 0x0 0x200000>; + no-map; + }; + + mba_mem: memory@94400000 { + reg = <0x0 0x94400000 0x0 0x200000>; + no-map; + }; + }; + + aliases { + bluetooth0 = &bluetooth; + hsuart0 = &uart3; + serial0 = &uart8; + wifi0 = &wifi; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + /* FIXED REGULATORS - parents above children */ + + /* This is the top level supply and variable voltage */ + ppvar_sys: ppvar-sys-regulator { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + /* This divides ppvar_sys by 2, so voltage is variable */ + src_vph_pwr: src-vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "src_vph_pwr"; + + /* EC turns on with switchcap_on; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&ppvar_sys>; + }; + + pp5000_a: pp5000-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp5000_a"; + + /* EC turns on with en_pp5000_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300_a: pp3300-a-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_a"; + + /* EC turns on with en_pp3300_a; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* + * Actually should be pp3300 but that's practically an alias for + * pp3300_a so we use pp3300's vin-supply here to avoid one more + * node. + */ + vin-supply = <&ppvar_sys>; + }; + + pp3300_audio: + pp3300_codec: pp3300-codec-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_codec"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 83 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_codec>; + + vin-supply = <&pp3300_a>; + }; + + pp3300_dx_edp: + pp3300_ts: pp3300-dx-edp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_dx_edp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 30 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_dx_edp>; + + vin-supply = <&pp3300_a>; + }; + + pp3300_fp_tp: pp3300-fp-tp-regulator { + compatible = "regulator-fixed"; + regulator-name = "pp3300_fp_tp"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + /* AP turns on with PP1800_VIO_OUT; always on for AP */ + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp3300_a>; + }; + + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + backlight: backlight { + compatible = "pwm-backlight"; + + pwms = <&cros_ec_pwm 1>; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + power-supply = <&ppvar_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_edp_bklten>; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&pen_pdct_l>; + + pen-insert { + label = "Pen Insert"; + + /* Insert = low, eject = high */ + gpios = <&tlmm 52 GPIO_ACTIVE_LOW>; + linux,code = ; + linux,input-type = ; + wakeup-source; + }; + }; + + max98357a: audio-codec-0 { + compatible = "maxim,max98357a"; + pinctrl-names = "default"; + pinctrl-0 = <&_en>; + sdmode-gpios = <&tlmm 23 GPIO_ACTIVE_HIGH>; + #sound-dai-cells = <0>; + }; + + pwmleds { + compatible = "pwm-leds"; + keyboard_backlight: keyboard-backlight { + status = "disabled"; + label = "cros_ec::kbd_backlight"; + pwms = <&cros_ec_pwm 0>; + max-brightness = <1023>; + }; + }; +}; + +&qfprom { + vcc-supply = <&pp1800_l11a>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* TODO: Increase frequency after testing */ + spi-max-frequency = <25000000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + +&apps_rsc { + pm6150-rpmh-regulators { + compatible = "qcom,pm6150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vddpx_1: + vdd2: + pp1125_s1a: smps1 { + regulator-min-microvolt = <1128000>; + regulator-max-microvolt = <1128000>; + }; + + /* + * pp2040_s5a (smps5) and pp1056_s4a (smps4) are just + * inputs to other rails on AOP-managed PMICs on trogdor. + * The system is already configured to manage these rails + * automatically (enable when needed, adjust voltage for + * headroom) so we won't specify anything here. + * + * NOTE: though the rails have a voltage implied by their + * name, the automatic headroom calculation might not result + * in them being that voltage. ...and that's OK. + * Specifically the only point of these rails is to provide + * an input source for other rails and if we can satisify the + * needs of those other rails with a lower source voltage then + * we save power. + */ + + pp1200_l1a: ldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + pp1000_l2a: ldo2 { + regulator-min-microvolt = <944000>; + regulator-max-microvolt = <1056000>; + regulator-initial-mode = ; + }; + + pp1000_l3a: ldo3 { + regulator-min-microvolt = <968000>; + regulator-max-microvolt = <1064000>; + regulator-initial-mode = ; + }; + + vdd_qlink_lv: + vdd_qlink_lv_ck: + vdd_qusb_hs0_core: + vdd_ufs1_core: + vdda_mipi_csi0_0p9: + vdda_mipi_csi1_0p9: + vdda_mipi_csi2_0p9: + vdda_mipi_csi3_0p9: + vdda_mipi_dsi0_pll: + vdda_pll_cc_ebi01: + vdda_qrefs_0p9: + vdda_usb_ss_dp_core: + pp900_l4a: ldo4 { + regulator-min-microvolt = <824000>; + regulator-max-microvolt = <928000>; + regulator-initial-mode = ; + }; + + pp2700_l5a: ldo5 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + regulator-initial-mode = ; + }; + + ebi0_cal: + ebi1_cal: + vddio_ck_ebi0: + vddio_ck_ebi1: + vddio_ebi0: + vddq: + pp600_l6a: ldo6 { + regulator-min-microvolt = <568000>; + regulator-max-microvolt = <648000>; + regulator-initial-mode = ; + }; + + vdd_cx_wlan: + pp800_l9a: ldo9 { + regulator-min-microvolt = <488000>; + regulator-max-microvolt = <800000>; + regulator-initial-mode = ; + }; + + vdd1: + vddpx_3: + vddpx_7: + vio_in: + pp1800_l10a: ldo10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdd_qfprom: + vdda_apc1_cs_1p8: + vdda_qrefs_1p8: + vdda_qusb_hs0_1p8: + vddpx_11: + vreg_bb_clk: + pp1800_l11a: ldo11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + mcp_vccq: + pp1800_l12a_r: ldo12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp1800_l13a: ldo13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp1800_prox: + pp1800_l14a: ldo14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp1800_alc5682: + pp1800_l15a: ldo15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp2700_l16a: ldo16 { + regulator-min-microvolt = <2496000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vdda_qusb_hs0_3p1: + vdd_pdphy: + pp3100_l17a: ldo17 { + regulator-min-microvolt = <2920000>; + regulator-max-microvolt = <3232000>; + regulator-initial-mode = ; + }; + + pp1800_pen: + pp1800_l18a: ldo18 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + mcp_vcc: + pp2850_l19a: ldo19 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = ; + }; + }; + + pm6150l-rpmh-regulators { + compatible = "qcom,pm6150l-rpmh-regulators"; + qcom,pmic-id = "c"; + + pp1300_s8c: smps8 { + regulator-min-microvolt = <1120000>; + regulator-max-microvolt = <1408000>; + }; + + pp1800_l1c: ldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vdd_wcss_adc_dac: + pp1300_l2c: ldo2 { + regulator-min-microvolt = <1168000>; + regulator-max-microvolt = <1304000>; + regulator-initial-mode = ; + }; + + pp1200_brij: + vdd_ufs1_1p2: + vdda_csi0_1p25: + vdda_csi1_1p25: + vdda_csi2_1p25: + vdda_csi3_1p25: + vdda_hv_ebi0: + vdda_mipi_dsi0_1p2: + vdda_usb_ss_dp_1p2: + vddpx_10: + pp1200_l3c: ldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + }; + + ld_pp1800_esim_l4c: + vddpx_5: + pp1800_l4c: ldo4 { + regulator-min-microvolt = <1648000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + vddpx_6: + pp1800_l5c: ldo5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + vddpx_2: + ppvar_l6c: ldo6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + }; + + pp3300_hub: + pp3300_l7c: ldo7 { + regulator-min-microvolt = <3304000>; + regulator-max-microvolt = <3304000>; + regulator-initial-mode = ; + regulator-always-on; + regulator-boot-on; + }; + + pp1800_brij_vccio: + pp1800_edp_vpll: + pp1800_l8c: ldo8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + }; + + pp2950_l9c: ldo9 { + regulator-min-microvolt = <2952000>; + regulator-max-microvolt = <2952000>; + regulator-initial-mode = ; + }; + + pp3300_l10c: ldo10 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + pp3300_l11c: ldo11 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3400000>; + regulator-initial-mode = ; + }; + + src_vreg_bob: bob { + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = ; + }; + }; +}; + +&ap_ec_spi { + status = "okay"; + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <94 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ap_ec_int_l>; + spi-max-frequency = <3000000>; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + pdupdate { + compatible = "google,cros-ec-pd-update"; + }; + + typec { + compatible = "google,cros-ec-typec"; + #address-cells = <1>; + #size-cells = <0>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + label = "left"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + label = "right"; + power-role = "dual"; + data-role = "host"; + try-power-role = "source"; + }; + }; + }; +}; + +&ap_h1_spi { + status = "okay"; + cr50: tpm@0 { + compatible = "google,cr50"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&h1_ap_int_odl>; + spi-max-frequency = <800000>; + interrupt-parent = <&tlmm>; + interrupts = <42 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&dsi0 { + status = "okay"; + vdda-supply = <&vdda_mipi_dsi0_1p2>; + + ports { + port@1 { + endpoint { + remote-endpoint = <&sn65dsi86_in>; + data-lanes = <0 1 2 3>; + }; + }; + }; +}; + +&dsi_phy { + status = "okay"; + vdds-supply = <&vdda_mipi_dsi0_pll>; +}; + +edp_brij_i2c: &i2c2 { + status = "okay"; + clock-frequency = <400000>; + + sn65dsi86_bridge: bridge@2d { + compatible = "ti,sn65dsi86"; + reg = <0x2d>; + pinctrl-names = "default"; + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>; + gpio-controller; + #gpio-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>; + + vpll-supply = <&pp1800_edp_vpll>; + vccio-supply = <&pp1800_brij_vccio>; + vcca-supply = <&pp1200_brij>; + vcc-supply = <&pp1200_brij>; + + clocks = <&rpmhcc RPMH_LN_BB_CLK3>; + clock-names = "refclk"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + sn65dsi86_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + + port@1 { + reg = <1>; + sn65dsi86_out: endpoint { + data-lanes = <0 1>; + remote-endpoint = <&panel_in_edp>; + }; + }; + }; + }; +}; + +ap_sar_sensor_i2c: &i2c5 { + status = "okay"; + clock-frequency = <400000>; + + ap_sar_sensor: proximity@28 { + compatible = "semtech,sx9310"; + reg = <0x28>; + #io-channel-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&p_sensor_int_l>; + + interrupt-parent = <&tlmm>; + interrupts = <24 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&pp3300_a>; + svdd-supply = <&pp1800_prox>; + + status = "disabled"; + label = "proximity-wifi"; + }; +}; + +ap_tp_i2c: &i2c7 { + status = "okay"; + clock-frequency = <400000>; + + trackpad@15 { + compatible = "elan,ekth3000"; + reg = <0x15>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_1v8_odl>; + + interrupt-parent = <&tlmm>; + interrupts = <58 IRQ_TYPE_EDGE_FALLING>; + + vcc-supply = <&pp3300_fp_tp>; + + wakeup-source; + }; +}; + +hp_i2c: &i2c9 { + status = "okay"; + clock-frequency = <400000>; + + alc5682: codec@1a { + compatible = "realtek,rt5682i"; + reg = <0x1a>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_irq>; + + #sound-dai-cells = <1>; + + interrupt-parent = <&tlmm>; + /* + * This will get ignored because the interrupt type + * is set in rt5682.c. + */ + interrupts = <28 IRQ_TYPE_EDGE_BOTH>; + + AVDD-supply = <&pp1800_alc5682>; + MICVDD-supply = <&pp3300_codec>; + VBAT-supply = <&pp3300_audio>; + + realtek,dmic1-data-pin = <1>; + realtek,dmic1-clk-pin = <1>; + realtek,jd-src = <1>; + }; +}; + +&ipa { + status = "okay"; + + /* + * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the + * modem needs to cover certain init steps (GSI init), and + * the AP needs to wait for it. + */ + modem-init; +}; + +&mdp { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm6150_pwrkey { + status = "disabled"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7180-mss-pil"; + iommus = <&apps_smmu 0x461 0x0>, <&apps_smmu 0x444 0x3>; + memory-region = <&mba_mem &mpss_mem>; + + /* This gets overridden for SKUs with LTE support. */ + firmware-name = "qcom/sc7180-trogdor/modem-nolte/mba.mbn", + "qcom/sc7180-trogdor/modem-nolte/qdsp6sw.mbn"; +}; + +&sdhc_1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + vmmc-supply = <&mcp_vcc>; + vqmmc-supply = <&mcp_vccq>; +}; + +&sdhc_2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_on>; + pinctrl-1 = <&sdc2_off>; + vmmc-supply = <&pp2950_l9c>; + vqmmc-supply = <&ppvar_l6c>; + + cd-gpios = <&tlmm 69 GPIO_ACTIVE_LOW>; +}; + +ap_spi_fp: &spi10 { + cros_ec_fp: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&tlmm>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>, <&fpmcu_sel>; + spi-max-frequency = <3000000>; + }; +}; + +#include +#include + +&uart3 { + status = "okay"; + + bluetooth: bluetooth { + compatible = "qcom,wcn3991-bt"; + vddio-supply = <&pp1800_l10a>; + vddxo-supply = <&pp1800_l1c>; + vddrf-supply = <&pp1300_l2c>; + vddch0-supply = <&pp3300_l10c>; + max-speed = <3200000>; + clocks = <&rpmhcc RPMH_RF_CLK2>; + }; +}; + +&uart8 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + vdd-supply = <&vdd_qusb_hs0_core>; + vdda-pll-supply = <&vdda_qusb_hs0_1p8>; + vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>; + qcom,imp-res-offset-value = <8>; + qcom,preemphasis-level = ; + qcom,preemphasis-width = ; + qcom,bias-ctrl-value = <0x22>; + qcom,charge-ctrl-value = <3>; + qcom,hsdisc-trim-value = <0>; +}; + +&usb_1_qmpphy { + status = "okay"; + vdda-phy-supply = <&vdda_usb_ss_dp_1p2>; + vdda-pll-supply = <&vdda_usb_ss_dp_core>; +}; + +&venus { + video-firmware { + iommus = <&apps_smmu 0x0c42 0x0>; + }; +}; + +&wifi { + status = "okay"; + vdd-0.8-cx-mx-supply = <&vdd_cx_wlan>; + vdd-1.8-xo-supply = <&pp1800_l1c>; + vdd-1.3-rfa-supply = <&pp1300_l2c>; + vdd-3.3-ch0-supply = <&pp3300_l10c>; + vdd-3.3-ch1-supply = <&pp3300_l11c>; + + wifi-firmware { + iommus = <&apps_smmu 0xc2 0x1>; + }; +}; + +/* PINCTRL - additions to nodes defined in sc7180.dtsi */ + +&qspi_cs0 { + pinconf { + pins = "gpio68"; + bias-disable; + }; +}; + +&qspi_clk { + pinconf { + pins = "gpio63"; + bias-disable; + }; +}; + +&qspi_data01 { + pinconf { + pins = "gpio64", "gpio65"; + + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; + }; +}; + +&qup_i2c2_default { + pinconf { + pins = "gpio15", "gpio16"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c4_default { + pinconf { + pins = "gpio115", "gpio116"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c5_default { + pinconf { + pins = "gpio25", "gpio26"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c7_default { + pinconf { + pins = "gpio6", "gpio7"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_i2c9_default { + pinconf { + pins = "gpio46", "gpio47"; + drive-strength = <2>; + + /* Has external pullup */ + bias-disable; + }; +}; + +&qup_spi0_default { + pinconf { + pins = "gpio34", "gpio35", "gpio36", "gpio37"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi6_default { + pinconf { + pins = "gpio59", "gpio60", "gpio61", "gpio62"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_spi10_default { + pinconf { + pins = "gpio86", "gpio87", "gpio88", "gpio89"; + drive-strength = <2>; + bias-disable; + }; +}; + +&qup_uart3_default { + pinconf-cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + pins = "gpio38"; + bias-pull-down; + }; + + pinconf-rts-tx { + /* We'll drive RTS and TX, so no pull */ + pins = "gpio39", "gpio40"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + pins = "gpio41"; + bias-pull-up; + }; +}; + +&qup_uart8_default { + pinconf-tx { + pins = "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + pinconf-rx { + pins = "gpio45"; + drive-strength = <2>; + bias-pull-up; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&pm6150_gpio { + status = "disabled"; /* No GPIOs are connected */ +}; + +&pm6150l_gpio { + gpio-line-names = "AP_SUSPEND", + "", + "", + "", + "", + "", + "", + "", + "", + "", + "", + ""; +}; + +&tlmm { + /* + * pinctrl settings for pins that have no real owners. + */ + pinctrl-names = "default"; + pinctrl-0 = <&bios_flash_wp_l>, <&ap_suspend_l_neuter>; + + amp_en: amp-en { + pinmux { + pins = "gpio23"; + function = "gpio"; + }; + + pinconf { + pins = "gpio23"; + bias-pull-down; + }; + }; + + ap_ec_int_l: ap-ec-int-l { + pinmux { + pins = "gpio94"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio94"; + bias-pull-up; + }; + }; + + ap_edp_bklten: ap-edp-bklten { + pinmux { + pins = "gpio12"; + function = "gpio"; + }; + + pinconf { + pins = "gpio12"; + drive-strength = <2>; + bias-disable; + + /* Force backlight to be disabled to match state at boot. */ + output-low; + }; + }; + + ap_suspend_l_neuter: ap-suspend-l-neuter { + pinmux { + pins = "gpio27"; + function = "gpio"; + }; + + pinconf { + pins = "gpio27"; + bias-disable; + }; + }; + + bios_flash_wp_l: bios-flash-wp-l { + pinmux { + pins = "gpio66"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio66"; + bias-disable; + }; + }; + + dp_hot_plug_det: dp-hot-plug-det { + pinmux { + pins = "gpio117"; + function = "dp_hot"; + }; + + config { + pins = "gpio117"; + bias-disable; + input-enable; + drive-strength = <2>; + }; + }; + + edp_brij_en: edp-brij-en { + pinmux { + pins = "gpio104"; + function = "gpio"; + }; + + pinconf { + pins = "gpio104"; + drive-strength = <2>; + bias-disable; + }; + }; + + edp_brij_irq: edp-brij-irq { + pinmux { + pins = "gpio11"; + function = "gpio"; + }; + + pinconf { + pins = "gpio11"; + drive-strength = <2>; + bias-pull-down; + }; + }; + + en_pp3300_codec: en-pp3300-codec { + pinmux { + pins = "gpio83"; + function = "gpio"; + }; + + pinconf { + pins = "gpio83"; + drive-strength = <2>; + bias-disable; + }; + }; + + en_pp3300_dx_edp: en-pp3300-dx-edp { + pinmux { + pins = "gpio30"; + function = "gpio"; + }; + + pinconf { + pins = "gpio30"; + drive-strength = <2>; + bias-disable; + }; + }; + + fpmcu_boot0: fpmcu-boot0 { + pinmux { + pins = "gpio10"; + function = "gpio"; + }; + + pinconf { + pins = "gpio10"; + bias-disable; + drive-strength = <2>; + output-low; + }; + }; + + fpmcu_sel: fpmcu-sel { + pinmux { + pins = "gpio22"; + function = "gpio"; + }; + + pinconf { + pins = "gpio22"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; + + fp_rst_l: fp-rst-l { + pinmux { + pins = "gpio5"; + function = "gpio"; + }; + + pinconf { + pins = "gpio5"; + bias-disable; + drive-strength = <2>; + output-high; + }; + }; + + fp_to_ap_irq_l: fp-to-ap-irq-l { + pinmux { + pins = "gpio4"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio4"; + + /* Has external pullup */ + bias-disable; + }; + }; + + + h1_ap_int_odl: h1-ap-int-odl { + pinmux { + pins = "gpio42"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio42"; + bias-pull-up; + }; + }; + + hp_irq: hp-irq { + pinmux { + pins = "gpio28"; + function = "gpio"; + }; + + pinconf { + pins = "gpio28"; + bias-pull-up; + }; + }; + + pen_irq_l: pen-irq-l { + pinmux { + pins = "gpio21"; + function = "gpio"; + }; + + pinconf { + pins = "gpio21"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_pdct_l: pen-pdct-l { + pinmux { + pins = "gpio52"; + function = "gpio"; + }; + + pinconf { + pins = "gpio52"; + + /* Has external pullup */ + bias-disable; + }; + }; + + pen_rst_odl: pen-rst-odl { + pinmux { + pins = "gpio18"; + function = "gpio"; + }; + + pinconf { + pins = "gpio18"; + bias-disable; + drive-strength = <2>; + + /* + * The pen driver doesn't currently support + * driving this reset line. By specifying + * output-high here we're relying on the fact + * that this pin has a default pulldown at boot + * (which makes sure the pen was in reset if it + * was powered) and then we set it high here to + * take it out of reset. Better would be if the + * pen driver could control this and we could + * remove "output-high" here. + */ + output-high; /* TODO: Remove this? */ + }; + }; + + p_sensor_int_l: p-sensor-int-l { + pinmux { + pins = "gpio24"; + function = "gpio"; + input-enable; + }; + + pinconf { + pins = "gpio24"; + bias-pull-up; + }; + }; + + trackpad_int_1v8_odl: trackpad-int-1v8-odl { + pinmux { + pins = "gpio58"; + function = "gpio"; + }; + + pinconf { + pins = "gpio58"; + + /* Has external pullup */ + bias-disable; + }; + }; + + ts_int_l: ts-int-l { + pinmux { + pins = "gpio9"; + function = "gpio"; + }; + + pinconf { + pins = "gpio9"; + bias-pull-up; + }; + }; + + ts_reset_l: ts-reset-l { + pinmux { + pins = "gpio8"; + function = "gpio"; + }; + + pinconf { + pins = "gpio8"; + bias-disable; + drive-strength = <2>; + }; + }; +};