From patchwork Sun May 31 09:55:11 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "stulluk at gmail.com" X-Patchwork-Id: 246887 List-Id: U-Boot discussion From: stulluk at gmail.com (stulluk at gmail.com) Date: Sun, 31 May 2020 12:55:11 +0300 Subject: [PATCH] sunxi: Add Drejo DS167 board Message-ID: <20200531095511.19699-1-stulluk@gmail.com> From: Sertac TULLUK drejo ds167 is an allwinner a20 based custom board with twin LVDS LCD and TouchScreen, 7inch and 10.1inch. The board has 1G RAM, 8G eMMC, AXP209 PMIC, 10/100 EMAC SATA, 2x USB2.0, 1x USB OTG, 3x dry-contact input 3x relay output, builtin KNX transceiver, HDMI, Audio Amplifier, external UART3, SPI0, etc. Signed-off-by: Sertac TULLUK --- arch/arm/dts/Makefile | 2 + arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts | 69 +++++ arch/arm/dts/sun7i-a20-drejo-ds167.dts | 305 ++++++++++++++++++++ board/sunxi/MAINTAINERS | 6 + configs/drejo-ds167-10.1-LVDS_defconfig | 30 ++ configs/drejo-ds167-7.0-LVDS_defconfig | 30 ++ 6 files changed, 442 insertions(+) create mode 100644 arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts create mode 100644 arch/arm/dts/sun7i-a20-drejo-ds167.dts create mode 100644 configs/drejo-ds167-10.1-LVDS_defconfig create mode 100644 configs/drejo-ds167-7.0-LVDS_defconfig diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 12ec6c71dc..55bbf7aa43 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -489,6 +489,8 @@ dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-bananapro.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ + sun7i-a20-drejo-ds167.dtb \ + sun7i-a20-drejo-ds167-emmc.dtb \ sun7i-a20-hummingbird.dtb \ sun7i-a20-i12-tvbox.dtb \ sun7i-a20-icnova-swac.dtb \ diff --git a/arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts b/arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts new file mode 100644 index 0000000000..b6147eb013 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-drejo-ds167-emmc.dts @@ -0,0 +1,69 @@ +/* + * Copyright 2020 Sertac TULLUK + * + * Sertac TULLUK + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sun7i-a20-drejo-ds167.dts" + +/ { + model = "drejo DS167-eMMC"; + compatible = "drejo,sun7i-a20-drejo-ds167-emmc", "allwinner,sun7i-a20"; + + mmc2_pwrseq: pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&pio 2 24 GPIO_ACTIVE_LOW>; + }; +}; + +&mmc2 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + mmc-pwrseq = <&mmc2_pwrseq>; + status = "okay"; + + emmc: emmc at 0 { + reg = <0>; + compatible = "mmc-card"; + broken-hpi; + }; +}; diff --git a/arch/arm/dts/sun7i-a20-drejo-ds167.dts b/arch/arm/dts/sun7i-a20-drejo-ds167.dts new file mode 100644 index 0000000000..cedeba0ff9 --- /dev/null +++ b/arch/arm/dts/sun7i-a20-drejo-ds167.dts @@ -0,0 +1,305 @@ +/* + * Copyright 2020 Sertac TULLUK + * + * Sertac TULLUK + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun7i-a20.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include +#include +#include + +/ { + model = "drejo DS167"; + compatible = "drejo,sun7i-a20-drejo-ds167", "allwinner,sun7i-a20"; + + aliases { + serial0 = &uart0; + serial3 = &uart3; + + spi0 = &spi1; + spi1 = &spi2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_ds167>; + + red { + label = "ds167-status"; + gpios = <&pio 8 9 GPIO_ACTIVE_LOW>; /* PI9 STATUS LED NEAR A20 DREJO */ + default-state = "on"; + }; + }; +}; + +&ahci { + target-supply = <®_ahci_5v>; + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <®_dcdc2>; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&gmac { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_mii_pins>, <&gmac_txerr>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy at 1 { + reg = <1>; + }; +}; + +&hdmi { + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&i2c0 { + status = "okay"; + + axp209: pmic at 34 { + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&lradc { + vref-supply = <®_vcc3v0>; + status = "okay"; +}; + +&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&otg_sram { + status = "okay"; +}; + +&pio { + gmac_txerr: gmac-txerr-pin { + pins = "PA17"; + function = "gmac"; + }; + + led_pins_ds167: led-pins { + pins = "PI9"; /* Status led, on schematic, this is LED_EN */ + function = "gpio_out"; + drive-strength = <20>; + }; + + usb0_id_detect_pin: usb0-id-detect-pin { + pins = "PH4"; + function = "gpio_in"; + bias-pull-up; + }; + + usb0_vbus_detect_pin: usb0-vbus-detect-pin { + pins = "PH5"; + function = "gpio_in"; + bias-pull-down; + }; +}; + +&pwm { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin>; + status = "okay"; +}; + +#include "axp209.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-cpu"; +}; + +®_dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; +}; + +®_ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + +®_ahci_5v { + status = "okay"; +}; + +®_usb0_vbus { + status = "okay"; +}; + +®_usb1_vbus { + status = "okay"; +}; + +®_usb2_vbus { + status = "okay"; +}; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pi_pins>, + <&spi1_cs0_pi_pin>; + status = "okay"; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pc_pins>, + <&spi2_cs0_pc_pin>; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pg_pins>; + status = "okay"; +}; + + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + +&usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ + usb0_vbus-supply = <®_usb0_vbus>; + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 1180b86db3..3e88bd0002 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -206,6 +206,12 @@ M: Chen-Yu Tsai S: Maintained F: configs/Cubietruck_plus_defconfig +DREJO DS167 BOARD +M: Sertac TULLUK +S: Maintained +F: configs/drejo-ds167-10.1-LVDS_defconfig +F: configs/drejo-ds167-7.0-LVDS_defconfig + EMLID NEUTIS N5 DEV BOARD M: Aleksandr Aleksandrov S: Maintained diff --git a/configs/drejo-ds167-10.1-LVDS_defconfig b/configs/drejo-ds167-10.1-LVDS_defconfig new file mode 100644 index 0000000000..6011ee2410 --- /dev/null +++ b/configs/drejo-ds167-10.1-LVDS_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=384 +CONFIG_MMC0_CD_PIN="PH1" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_I2C1_ENABLE=y +CONFIG_SATAPWR="PB8" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-drejo-ds167-emmc" +CONFIG_SCSI_AHCI=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_SUN7I_GMAC=y +CONFIG_SUN7I_GMAC_FORCE_TXERR=y +CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y +# CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_OHCI_HCD=y +CONFIG_VIDEO_HDMI=n +CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n +CONFIG_VIDEO_LCD_MODE="x:1280,y:800,depth:18,pclk_khz:69000,le:19,ri:118,up:9,lo:6,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" diff --git a/configs/drejo-ds167-7.0-LVDS_defconfig b/configs/drejo-ds167-7.0-LVDS_defconfig new file mode 100644 index 0000000000..53f64b54a0 --- /dev/null +++ b/configs/drejo-ds167-7.0-LVDS_defconfig @@ -0,0 +1,30 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN7I=y +CONFIG_DRAM_CLK=384 +CONFIG_MMC0_CD_PIN="PH1" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_I2C1_ENABLE=y +CONFIG_SATAPWR="PB8" +CONFIG_AHCI=y +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL_I2C_SUPPORT=y +CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-drejo-ds167-emmc" +CONFIG_SCSI_AHCI=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MII=y +CONFIG_SUN7I_GMAC=y +CONFIG_SUN7I_GMAC_FORCE_TXERR=y +CONFIG_AXP_ALDO3_VOLT=2800 +CONFIG_AXP_ALDO4_VOLT=2800 +CONFIG_SCSI=y +# CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_OHCI_HCD=y +CONFIG_VIDEO_HDMI=n +CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n +CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:22,ri:297,up:1,lo:33,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2"