From patchwork Sun May 24 17:25:13 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jagan Teki X-Patchwork-Id: 246383 List-Id: U-Boot discussion From: jagan at amarulasolutions.com (Jagan Teki) Date: Sun, 24 May 2020 22:55:13 +0530 Subject: [PATCH] mmc: sdhci: Fix HISPD bit handling Message-ID: <20200524172513.199962-1-jagan@amarulasolutions.com> SDHCI HISPD bits need to be configured based on desired mmc timings mode and some HISPD quirks. So, handle the HISPD bit based on the mmc computed selected mode(timing parameter) rather than fixed mmc card clock frequency. Linux handle the HISPD similar like this in below commit, commit <501639bf2173> ("mmc: sdhci: fix SDHCI_QUIRK_NO_HISPD_BIT handling") This eventually fixed the mmc write issue observed in rk3399 sdhci controller. Bug log for refernece, => gpt write mmc 0 $partitions Writing GPT: mmc write failed ** Can't write to device 0 ** ** Can't write to device 0 ** error! Cc: Kever Yang Cc: Peng Fan Signed-off-by: Jagan Teki Reviewed-by: Jaehoon Chung --- drivers/mmc/sdhci.c | 23 +++++++++++++++-------- 1 file changed, 15 insertions(+), 8 deletions(-) diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index 92cc8434af..280b8c88eb 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -594,14 +594,21 @@ static int sdhci_set_ios(struct mmc *mmc) ctrl &= ~SDHCI_CTRL_4BITBUS; } - if (mmc->clock > 26000000) - ctrl |= SDHCI_CTRL_HISPD; - else - ctrl &= ~SDHCI_CTRL_HISPD; - - if ((host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) || - (host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE)) - ctrl &= ~SDHCI_CTRL_HISPD; + if (!(host->quirks & SDHCI_QUIRK_NO_HISPD_BIT) || + !(host->quirks & SDHCI_QUIRK_BROKEN_HISPD_MODE)) { + if (mmc->selected_mode == MMC_HS || + mmc->selected_mode == SD_HS || + mmc->selected_mode == MMC_DDR_52 || + mmc->selected_mode == MMC_HS_200 || + mmc->selected_mode == MMC_HS_400 || + mmc->selected_mode == UHS_SDR25 || + mmc->selected_mode == UHS_SDR50 || + mmc->selected_mode == UHS_SDR104 || + mmc->selected_mode == UHS_DDR50) + ctrl |= SDHCI_CTRL_HISPD; + else + ctrl &= ~SDHCI_CTRL_HISPD; + } sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);