From patchwork Wed May 20 16:40:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 246113 List-Id: U-Boot discussion From: michael at walle.cc (Michael Walle) Date: Wed, 20 May 2020 18:40:25 +0200 Subject: [PATCH v5 1/2] usb: provide a device tree node to USB devices Message-ID: <20200520164026.17993-1-michael@walle.cc> It is possible to specify a device tree node for an USB device. This is useful if you have a static USB setup and want to use aliases which point to these nodes, like on the Raspberry Pi. The nodes are matched against their hub port number, the compatible strings are not matched for now. Signed-off-by: Michael Walle Reviewed-by: Marek Vasut --- This is a new patch in v5: Fixes the ethernet0 alias on Raspberry Pis. This has never been working, but wasn't a problem until recently. Patch 2/2 changes the allocation of the numbers and reserves possible aliases. drivers/usb/host/usb-uclass.c | 41 ++++++++++++++++++++++++++++++----- 1 file changed, 36 insertions(+), 5 deletions(-) diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c index cb79dfbbd5..f42c0625cb 100644 --- a/drivers/usb/host/usb-uclass.c +++ b/drivers/usb/host/usb-uclass.c @@ -494,6 +494,35 @@ static int usb_match_one_id(struct usb_device_descriptor *desc, return usb_match_one_id_intf(desc, int_desc, id); } +static ofnode usb_get_ofnode(struct udevice *hub, int port) +{ + ofnode node; + u32 reg; + + if (!dev_has_of_node(hub)) + return ofnode_null(); + + /* + * The USB controller and its USB hub are two different udevices, + * but the device tree has only one node for both. Thus we are + * assigning this node to both udevices. + * If port is zero, the controller scans its root hub, thus we + * are using the same ofnode as the controller here. + */ + if (!port) + return dev_ofnode(hub); + + ofnode_for_each_subnode(node, dev_ofnode(hub)) { + if (ofnode_read_u32(node, "reg", ®)) + continue; + + if (reg == port) + return node; + } + + return ofnode_null(); +} + /** * usb_find_and_bind_driver() - Find and bind the right USB driver * @@ -502,13 +531,14 @@ static int usb_match_one_id(struct usb_device_descriptor *desc, static int usb_find_and_bind_driver(struct udevice *parent, struct usb_device_descriptor *desc, struct usb_interface_descriptor *iface, - int bus_seq, int devnum, + int bus_seq, int devnum, int port, struct udevice **devp) { struct usb_driver_entry *start, *entry; int n_ents; int ret; char name[30], *str; + ofnode node = usb_get_ofnode(parent, port); *devp = NULL; debug("%s: Searching for driver\n", __func__); @@ -533,8 +563,8 @@ static int usb_find_and_bind_driver(struct udevice *parent, * find another driver. For now this doesn't seem * necesssary, so just bind the first match. */ - ret = device_bind(parent, drv, drv->name, NULL, -1, - &dev); + ret = device_bind_ofnode(parent, drv, drv->name, NULL, + node, &dev); if (ret) goto error; debug("%s: Match found: %s\n", __func__, drv->name); @@ -651,9 +681,10 @@ int usb_scan_device(struct udevice *parent, int port, if (ret) { if (ret != -ENOENT) return ret; - ret = usb_find_and_bind_driver(parent, &udev->descriptor, iface, + ret = usb_find_and_bind_driver(parent, &udev->descriptor, + iface, udev->controller_dev->seq, - udev->devnum, &dev); + udev->devnum, port, &dev); if (ret) return ret; created = true; From patchwork Wed May 20 16:40:26 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michael Walle X-Patchwork-Id: 246112 List-Id: U-Boot discussion From: michael at walle.cc (Michael Walle) Date: Wed, 20 May 2020 18:40:26 +0200 Subject: [PATCH v5 2/2] dm: uclass: don't assign aliased seq numbers In-Reply-To: <20200520164026.17993-1-michael@walle.cc> References: <20200520164026.17993-1-michael@walle.cc> Message-ID: <20200520164026.17993-2-michael@walle.cc> If there are aliases for an uclass, set the base for the "dynamically" allocated numbers next to the highest alias. Please note, that this might lead to holes in the sequences, depending on the device tree. For example if there is only an alias "ethernet1", the next device seq number would be 2. In particular this fixes a problem with boards which are using ethernet aliases but also might have network add-in cards like the E1000. If the board is started with the add-in card and depending on the order of the drivers, the E1000 might occupy the first ethernet device and mess up all the hardware addresses, because the devices are now shifted by one. Also adapt the test cases to the new handling and add test cases checking the holes in the seq numbers. Signed-off-by: Michael Walle Reviewed-by: Alex Marginean Tested-by: Alex Marginean Acked-by: Vladimir Oltean Reviewed-by: Simon Glass Tested-by: Michal Simek [on zcu102-revA] --- arch/sandbox/dts/test.dts | 4 ++-- drivers/core/uclass.c | 21 +++++++++++++++------ include/configs/sandbox.h | 6 +++--- test/dm/eth.c | 14 +++++++------- test/dm/test-fdt.c | 22 +++++++++++++++++----- 5 files changed, 44 insertions(+), 23 deletions(-) diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 5ce5e28476..37dbd86017 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -23,8 +23,8 @@ pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; - remoteproc1 = &rproc_1; - remoteproc2 = &rproc_2; + remoteproc0 = &rproc_1; + remoteproc1 = &rproc_2; rtc0 = &rtc_0; rtc1 = &rtc_1; spi0 = "/spi at 0"; diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c index 2ab419cfe4..c3f1b73cd6 100644 --- a/drivers/core/uclass.c +++ b/drivers/core/uclass.c @@ -689,13 +689,14 @@ int uclass_unbind_device(struct udevice *dev) int uclass_resolve_seq(struct udevice *dev) { + struct uclass *uc = dev->uclass; + struct uclass_driver *uc_drv = uc->uc_drv; struct udevice *dup; - int seq; + int seq = 0; int ret; assert(dev->seq == -1); - ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, dev->req_seq, - false, &dup); + ret = uclass_find_device_by_seq(uc_drv->id, dev->req_seq, false, &dup); if (!ret) { dm_warn("Device '%s': seq %d is in use by '%s'\n", dev->name, dev->req_seq, dup->name); @@ -707,9 +708,17 @@ int uclass_resolve_seq(struct udevice *dev) return ret; } - for (seq = 0; seq < DM_MAX_SEQ; seq++) { - ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, seq, - false, &dup); + if (CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_SEQ_ALIAS) && + (uc_drv->flags & DM_UC_FLAG_SEQ_ALIAS)) { + /* + * dev_read_alias_highest_id() will return -1 if there no + * alias. Thus we can always add one. + */ + seq = dev_read_alias_highest_id(uc_drv->name) + 1; + } + + for (; seq < DM_MAX_SEQ; seq++) { + ret = uclass_find_device_by_seq(uc_drv->id, seq, false, &dup); if (ret == -ENODEV) break; if (ret) diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 7fda63f71a..4549c81169 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -95,9 +95,9 @@ #endif #define SANDBOX_ETH_SETTINGS "ethaddr=00:00:11:22:33:44\0" \ - "eth1addr=00:00:11:22:33:45\0" \ - "eth3addr=00:00:11:22:33:46\0" \ - "eth5addr=00:00:11:22:33:47\0" \ + "eth3addr=00:00:11:22:33:45\0" \ + "eth5addr=00:00:11:22:33:46\0" \ + "eth6addr=00:00:11:22:33:47\0" \ "ipaddr=1.2.3.4\0" #define MEM_LAYOUT_ENV_SETTINGS \ diff --git a/test/dm/eth.c b/test/dm/eth.c index 1fddcaabb0..b58c9640a2 100644 --- a/test/dm/eth.c +++ b/test/dm/eth.c @@ -48,7 +48,7 @@ static int dm_test_eth_alias(struct unit_test_state *uts) ut_assertok(net_loop(PING)); ut_asserteq_str("eth at 10002000", env_get("ethact")); - env_set("ethact", "eth1"); + env_set("ethact", "eth6"); ut_assertok(net_loop(PING)); ut_asserteq_str("eth at 10004000", env_get("ethact")); @@ -105,7 +105,7 @@ static int dm_test_eth_act(struct unit_test_state *uts) const char *ethname[DM_TEST_ETH_NUM] = {"eth at 10002000", "eth at 10003000", "sbe5", "eth at 10004000"}; const char *addrname[DM_TEST_ETH_NUM] = {"ethaddr", "eth5addr", - "eth3addr", "eth1addr"}; + "eth3addr", "eth6addr"}; char ethaddr[DM_TEST_ETH_NUM][18]; int i; @@ -188,15 +188,15 @@ static int dm_test_eth_rotate(struct unit_test_state *uts) /* Invalidate eth1's MAC address */ memset(ethaddr, '\0', sizeof(ethaddr)); - strncpy(ethaddr, env_get("eth1addr"), 17); - /* Must disable access protection for eth1addr before clearing */ - env_set(".flags", "eth1addr"); - env_set("eth1addr", NULL); + strncpy(ethaddr, env_get("eth6addr"), 17); + /* Must disable access protection for eth6addr before clearing */ + env_set(".flags", "eth6addr"); + env_set("eth6addr", NULL); retval = _dm_test_eth_rotate1(uts); /* Restore the env */ - env_set("eth1addr", ethaddr); + env_set("eth6addr", ethaddr); env_set("ethrotate", NULL); if (!retval) { diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c index 4fcae03dc5..51f2547409 100644 --- a/test/dm/test-fdt.c +++ b/test/dm/test-fdt.c @@ -361,20 +361,32 @@ static int dm_test_fdt_uclass_seq(struct unit_test_state *uts) ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 2, &dev)); ut_asserteq_str("d-test", dev->name); - /* d-test actually gets 0 */ - ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 0, &dev)); + /* + * d-test actually gets 9, because thats the next free one after the + * aliases. + */ + ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 9, &dev)); ut_asserteq_str("d-test", dev->name); - /* initially no one wants seq 1 */ - ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 1, + /* initially no one wants seq 10 */ + ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 10, &dev)); ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev)); ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 4, &dev)); /* But now that it is probed, we can find it */ - ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 1, &dev)); + ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 10, &dev)); ut_asserteq_str("f-test", dev->name); + /* + * And we should still have holes in our sequence numbers, that is 2 + * and 4 should not be used. + */ + ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 2, + true, &dev)); + ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 4, + true, &dev)); + return 0; } DM_TEST(dm_test_fdt_uclass_seq, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);