From patchwork Fri May 15 19:53:01 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ilias Apalodimas X-Patchwork-Id: 245864 List-Id: U-Boot discussion From: ilias.apalodimas at linaro.org (Ilias Apalodimas) Date: Fri, 15 May 2020 22:53:01 +0300 Subject: [PATCH 1/6 v3] efi_loader: Add headers for EDK2 StandAloneMM communication In-Reply-To: <20200515195306.522742-1-ilias.apalodimas@linaro.org> References: <20200515195306.522742-1-ilias.apalodimas@linaro.org> Message-ID: <20200515195306.522742-2-ilias.apalodimas@linaro.org> From: Sughosh Ganu In Arm devices OP-TEE has the ability to run StandAloneMM (from EDK2) in a separate partition and handle UEFI variables. A following patch introduces this functionality. Add the headers needed for OP-TEE <--> StandAloneMM communication Signed-off-by: Sughosh Ganu Signed-off-by: Ilias Apalodimas Reviewed-by: Heinrich Schuchardt --- include/mm_communication.h | 208 +++++++++++++++++++++++++++++++++++++ 1 file changed, 208 insertions(+) create mode 100644 include/mm_communication.h diff --git a/include/mm_communication.h b/include/mm_communication.h new file mode 100644 index 000000000000..193c4d157874 --- /dev/null +++ b/include/mm_communication.h @@ -0,0 +1,208 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Headers for EFI variable service via StandAloneMM, EDK2 application running + * in OP-TEE + * + * Copyright (c) 2017, Intel Corporation. All rights reserved. + * Copyright (C) 2020 Linaro Ltd. + * Copyright (C) 2020 Linaro Ltd. + */ + +#ifndef _MM_COMMUNICATION_H_ +#define _MM_COMMUNICATION_H_ + +#include + +/* + * Interface to the pseudo Trusted Application (TA), which provides a + * communication channel with the Standalone MM (Management Mode) + * Secure Partition running at Secure-EL0 + */ + +#define PTA_STMM_CMDID_COMMUNICATE 0 + +/* OP-TEE is using big endian GUIDs while UEFI uses little endian ones */ +#define PTA_STMM_UUID { 0xed32d533, 0x99e6, 0x4209, {\ + 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 } } + +#define EFI_MM_VARIABLE_GUID \ + EFI_GUID(0xed32d533, 0x99e6, 0x4209, \ + 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7) + +/* Defined in EDK2 MdePkg/Include/Protocol/MmCommunication.h */ + +/** + * struct efi_mm_communicate_header - Header used for SMM variable communication + + * @header_guid: header use for disambiguation of content + * @message_len: length of the message. Does not include the size of the + * header + * @data: payload of the message + * + * Defined in EDK2 as EFI_MM_COMMUNICATE_HEADER. + * To avoid confusion in interpreting frames, the communication buffer should + * always begin with efi_mm_communicate_header. + */ +struct efi_mm_communicate_header { + efi_guid_t header_guid; + size_t message_len; + u8 data[]; +}; + +#define MM_COMMUNICATE_HEADER_SIZE \ + (sizeof(struct efi_mm_communicate_header)) + +/* Defined in EDK2 ArmPkg/Include/IndustryStandard/ArmStdSmc.h */ + +/* MM return error codes */ +#define ARM_SMC_MM_RET_SUCCESS 0 +#define ARM_SMC_MM_RET_NOT_SUPPORTED -1 +#define ARM_SMC_MM_RET_INVALID_PARAMS -2 +#define ARM_SMC_MM_RET_DENIED -3 +#define ARM_SMC_MM_RET_NO_MEMORY -4 + +/* Defined in EDK2 MdeModulePkg/Include/Guid/SmmVariableCommon.h */ + +#define SMM_VARIABLE_FUNCTION_GET_VARIABLE 1 +/* + * The payload for this function is + * SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME. + */ +#define SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME 2 +/* + * The payload for this function is SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE. + */ +#define SMM_VARIABLE_FUNCTION_SET_VARIABLE 3 +/* + * The payload for this function is + * SMM_VARIABLE_COMMUNICATE_QUERY_VARIABLE_INFO. + */ +#define SMM_VARIABLE_FUNCTION_QUERY_VARIABLE_INFO 4 +/* + * It is a notify event, no extra payload for this function. + */ +#define SMM_VARIABLE_FUNCTION_READY_TO_BOOT 5 +/* + * It is a notify event, no extra payload for this function. + */ +#define SMM_VARIABLE_FUNCTION_EXIT_BOOT_SERVICE 6 +/* + * The payload for this function is VARIABLE_INFO_ENTRY. + * The GUID in EFI_SMM_COMMUNICATE_HEADER is gEfiSmmVariableProtocolGuid. + */ +#define SMM_VARIABLE_FUNCTION_GET_STATISTICS 7 +/* + * The payload for this function is SMM_VARIABLE_COMMUNICATE_LOCK_VARIABLE + */ +#define SMM_VARIABLE_FUNCTION_LOCK_VARIABLE 8 + +#define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_SET 9 + +#define SMM_VARIABLE_FUNCTION_VAR_CHECK_VARIABLE_PROPERTY_GET 10 + +#define SMM_VARIABLE_FUNCTION_GET_PAYLOAD_SIZE 11 +/* + * The payload for this function is + * SMM_VARIABLE_COMMUNICATE_RUNTIME_VARIABLE_CACHE_CONTEXT + */ +#define SMM_VARIABLE_FUNCTION_INIT_RUNTIME_VARIABLE_CACHE_CONTEXT 12 + +#define SMM_VARIABLE_FUNCTION_SYNC_RUNTIME_CACHE 13 +/* + * The payload for this function is + * SMM_VARIABLE_COMMUNICATE_GET_RUNTIME_CACHE_INFO + */ +#define SMM_VARIABLE_FUNCTION_GET_RUNTIME_CACHE_INFO 14 + +/** + * struct smm_variable_communicate_header - Used for SMM variable communication + + * @function: function to call in Smm. + * @ret_status: return status + * @data: payload + * + * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_HEADER. + */ +struct smm_variable_communicate_header { + efi_uintn_t function; + efi_status_t ret_status; + u8 data[]; +}; + +#define MM_VARIABLE_COMMUNICATE_SIZE \ + (sizeof(struct smm_variable_communicate_header)) + +/** + * struct smm_variable_access - Used to communicate with StMM by + * SetVariable and GetVariable. + + * @guid: vendor GUID + * @data_size: size of EFI variable data + * @name_size: size of EFI name + * @attr: attributes + * @name: variable name + * + * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_ACCESS_VARIABLE. + * + */ +struct smm_variable_access { + efi_guid_t guid; + efi_uintn_t data_size; + efi_uintn_t name_size; + u32 attr; + u16 name[]; +}; + +#define MM_VARIABLE_ACCESS_HEADER_SIZE \ + (sizeof(struct smm_variable_access)) +/** + * struct smm_variable_payload_size - Used to get the max allowed + * payload used in StMM. + * + * @size: size to fill in + * + * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_GET_PAYLOAD_SIZE. + * + */ +struct smm_variable_payload_size { + efi_uintn_t size; +}; + +/** + * struct smm_variable_getnext - Used to communicate with StMM for + * GetNextVariableName. + * + * @guid: vendor GUID + * @name_size: size of the name of the variable + * @name: variable name + * + * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_GET_NEXT_VARIABLE_NAME. + */ +struct smm_variable_getnext { + efi_guid_t guid; + efi_uintn_t name_size; + u16 name[]; +}; + +#define MM_VARIABLE_GET_NEXT_HEADER_SIZE \ + (sizeof(struct smm_variable_getnext)) + +/** + * struct smm_variable_query_info - Used to communicate with StMM for + * QueryVariableInfo. + * + * @max_variable_storage: max available storage + * @remaining_variable_storage: remaining available storage + * @max_variable_size: max variable supported size + * @attr: attributes to query storage for + * + * Defined in EDK2 as SMM_VARIABLE_COMMUNICATE_QUERY_VARIABLE_INFO. + */ +struct smm_variable_query_info { + u64 max_variable_storage; + u64 remaining_variable_storage; + u64 max_variable_size; + u32 attr; +}; + +#endif /* _MM_COMMUNICATION_H_ */ From patchwork Fri May 15 19:53:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ilias Apalodimas X-Patchwork-Id: 245867 List-Id: U-Boot discussion From: ilias.apalodimas at linaro.org (Ilias Apalodimas) Date: Fri, 15 May 2020 22:53:02 +0300 Subject: [PATCH 2/6 v3] efi_loader: Implement EFI variable handling via OP-TEE In-Reply-To: <20200515195306.522742-1-ilias.apalodimas@linaro.org> References: <20200515195306.522742-1-ilias.apalodimas@linaro.org> Message-ID: <20200515195306.522742-3-ilias.apalodimas@linaro.org> In OP-TEE we can run EDK2's StandAloneMM on a secure partition. StandAloneMM is responsible for the UEFI variable support. In combination with OP-TEE and it's U-Boot supplicant, variables are authenticated/validated in secure world and stored on an RPMB partition. So let's add a new config option in U-Boot implementing the necessary calls to OP-TEE for the variable management. Signed-off-by: Ilias Apalodimas Signed-off-by: Pipat Methavanitpong Signed-off-by: Sughosh Ganu --- lib/efi_loader/Kconfig | 9 + lib/efi_loader/Makefile | 4 + lib/efi_loader/efi_variable_tee.c | 662 ++++++++++++++++++++++++++++++ 3 files changed, 675 insertions(+) create mode 100644 lib/efi_loader/efi_variable_tee.c diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig index 1cfa24ffcf72..45862a1e9caf 100644 --- a/lib/efi_loader/Kconfig +++ b/lib/efi_loader/Kconfig @@ -164,4 +164,13 @@ config EFI_SECURE_BOOT it is signed with a trusted key. To do that, you need to install, at least, PK, KEK and db. +config EFI_MM_COMM_TEE + bool "UEFI variables storage service via OP-TEE" + depends on OPTEE + default n + help + If OP-TEE is present and running StandAloneMM dispatch all UEFI variable + related operations to that. The application will verify, authenticate and + store the variables on an RPMB + endif diff --git a/lib/efi_loader/Makefile b/lib/efi_loader/Makefile index 84d61df55b93..57c7e66ea0e2 100644 --- a/lib/efi_loader/Makefile +++ b/lib/efi_loader/Makefile @@ -35,7 +35,11 @@ obj-y += efi_root_node.o obj-y += efi_runtime.o obj-y += efi_setup.o obj-$(CONFIG_EFI_UNICODE_COLLATION_PROTOCOL2) += efi_unicode_collation.o +ifeq ($(CONFIG_EFI_MM_COMM_TEE),y) +obj-y += efi_variable_tee.o +else obj-y += efi_variable.o +endif obj-y += efi_watchdog.o obj-$(CONFIG_LCD) += efi_gop.o obj-$(CONFIG_DM_VIDEO) += efi_gop.o diff --git a/lib/efi_loader/efi_variable_tee.c b/lib/efi_loader/efi_variable_tee.c new file mode 100644 index 000000000000..cacc76e23db1 --- /dev/null +++ b/lib/efi_loader/efi_variable_tee.c @@ -0,0 +1,662 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * EFI variable service via OP-TEE + * + * Copyright (C) 2019 Linaro Ltd. + * Copyright (C) 2019 Linaro Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include + +static efi_uintn_t max_buffer_size; /* comm + var + func + data */ +static efi_uintn_t max_payload_size; /* func + data */ + +struct mm_connection { + struct udevice *tee; + u32 session; +}; + +/** + * get_connection() - Retrieve OP-TEE session for a specific UUID. + * + * @conn: session buffer to fill + * Return: status code + */ +static int get_connection(struct mm_connection *conn) +{ + static const struct tee_optee_ta_uuid uuid = PTA_STMM_UUID; + struct udevice *tee = NULL; + struct tee_open_session_arg arg; + int rc; + + tee = tee_find_device(tee, NULL, NULL, NULL); + if (!tee) + return -ENODEV; + + memset(&arg, 0, sizeof(arg)); + tee_optee_ta_uuid_to_octets(arg.uuid, &uuid); + rc = tee_open_session(tee, &arg, 0, NULL); + if (!rc) { + conn->tee = tee; + conn->session = arg.session; + } + + return rc; +} + +/** + * optee_mm_communicate() - Pass a buffer to StandaloneMM running in OP-TEE + * + * @comm_buf: locally allocted communcation buffer + * @dsize: buffer size + * Return: status code + */ +static efi_status_t optee_mm_communicate(void *comm_buf, ulong dsize) +{ + ulong buf_size; + efi_status_t ret; + struct efi_mm_communicate_header *mm_hdr; + struct mm_connection conn = { NULL, 0 }; + struct tee_invoke_arg arg; + struct tee_param param[2]; + struct tee_shm *shm = NULL; + int rc; + + if (!comm_buf) + return EFI_INVALID_PARAMETER; + + mm_hdr = (struct efi_mm_communicate_header *)comm_buf; + buf_size = mm_hdr->message_len + sizeof(efi_guid_t) + sizeof(size_t); + + if (dsize != buf_size) + return EFI_INVALID_PARAMETER; + + rc = get_connection(&conn); + if (rc) { + log_err("Unable to open OP-TEE session (err=%d)\n", rc); + return EFI_UNSUPPORTED; + } + + if (tee_shm_register(conn.tee, comm_buf, buf_size, 0, &shm)) { + log_err("Unable to register shared memory\n"); + return EFI_UNSUPPORTED; + } + + memset(&arg, 0, sizeof(arg)); + arg.func = PTA_STMM_CMDID_COMMUNICATE; + arg.session = conn.session; + + memset(param, 0, sizeof(param)); + param[0].attr = TEE_PARAM_ATTR_TYPE_MEMREF_INOUT; + param[0].u.memref.size = buf_size; + param[0].u.memref.shm = shm; + param[1].attr = TEE_PARAM_ATTR_TYPE_VALUE_OUTPUT; + + rc = tee_invoke_func(conn.tee, &arg, 2, param); + if (rc) + return EFI_INVALID_PARAMETER; + tee_shm_free(shm); + tee_close_session(conn.tee, conn.session); + + switch (param[1].u.value.a) { + case ARM_SMC_MM_RET_SUCCESS: + ret = EFI_SUCCESS; + break; + + case ARM_SMC_MM_RET_INVALID_PARAMS: + ret = EFI_INVALID_PARAMETER; + break; + + case ARM_SMC_MM_RET_DENIED: + ret = EFI_ACCESS_DENIED; + break; + + case ARM_SMC_MM_RET_NO_MEMORY: + ret = EFI_OUT_OF_RESOURCES; + break; + + default: + ret = EFI_ACCESS_DENIED; + } + + return ret; +} + +/** + * mm_communicate() - Adjust the cmonnucation buffer to StandAlonneMM and send + * it to OP-TEE + * + * @comm_buf: locally allocted communcation buffer + * @dsize: buffer size + * Return: status code + */ +static efi_status_t mm_communicate(u8 *comm_buf, efi_uintn_t dsize) +{ + efi_status_t ret; + struct efi_mm_communicate_header *mm_hdr; + struct smm_variable_communicate_header *var_hdr; + + dsize += MM_COMMUNICATE_HEADER_SIZE + MM_VARIABLE_COMMUNICATE_SIZE; + mm_hdr = (struct efi_mm_communicate_header *)comm_buf; + var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data; + + ret = optee_mm_communicate(comm_buf, dsize); + if (ret != EFI_SUCCESS) { + log_err("%s failed!\n", __func__); + return ret; + } + + return var_hdr->ret_status; +} + +/** + * setup_mm_hdr() - Allocate a buffer for StandAloneMM and initialize the + * header data. + * + * @dptr: pointer address of the corresponding StandAloneMM + * function + * @payload_size: buffer size + * @func: standAloneMM function number + * @ret: EFI return code + * Return: buffer or NULL + */ +static u8 *setup_mm_hdr(void **dptr, efi_uintn_t payload_size, + efi_uintn_t func, efi_status_t *ret) +{ + const efi_guid_t mm_var_guid = EFI_MM_VARIABLE_GUID; + struct efi_mm_communicate_header *mm_hdr; + struct smm_variable_communicate_header *var_hdr; + u8 *comm_buf; + + /* In the init function we initialize max_buffer_size with + * get_max_payload(). So skip the test if max_buffer_size is initialized + * StandAloneMM will perform similar checks and drop the buffer if it's + * too long + */ + if (max_buffer_size && max_buffer_size < + (MM_COMMUNICATE_HEADER_SIZE + + MM_VARIABLE_COMMUNICATE_SIZE + + payload_size)) { + *ret = EFI_INVALID_PARAMETER; + return NULL; + } + + comm_buf = calloc(1, MM_COMMUNICATE_HEADER_SIZE + + MM_VARIABLE_COMMUNICATE_SIZE + + payload_size); + if (!comm_buf) { + *ret = EFI_OUT_OF_RESOURCES; + return NULL; + } + + mm_hdr = (struct efi_mm_communicate_header *)comm_buf; + guidcpy(&mm_hdr->header_guid, &mm_var_guid); + mm_hdr->message_len = MM_VARIABLE_COMMUNICATE_SIZE + payload_size; + + var_hdr = (struct smm_variable_communicate_header *)mm_hdr->data; + var_hdr->function = func; + if (dptr) + *dptr = var_hdr->data; + *ret = EFI_SUCCESS; + + return comm_buf; +} + +/** + * get_max_payload() - Get variable payload size from StandAloneMM. + * + * @size: size of the variable in storage + * Return: status code + */ +efi_status_t EFIAPI get_max_payload(efi_uintn_t *size) +{ + struct smm_variable_payload_size *var_payload = NULL; + efi_uintn_t payload_size; + u8 *comm_buf = NULL; + efi_status_t ret; + + if (!size) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + payload_size = sizeof(*var_payload); + comm_buf = setup_mm_hdr((void **)&var_payload, payload_size, + SMM_VARIABLE_FUNCTION_GET_PAYLOAD_SIZE, &ret); + if (!comm_buf) + goto out; + + ret = mm_communicate(comm_buf, payload_size); + if (ret != EFI_SUCCESS) + goto out; + + *size = var_payload->size; + +out: + free(comm_buf); + return ret; +} + +/** + * efi_get_variable() - retrieve value of a UEFI variable + * + * This function implements the GetVariable runtime service. + * + * See the Unified Extensible Firmware Interface (UEFI) specification for + * details. + * + * @name: name of the variable + * @guid: vendor GUID + * @attr: attributes of the variable + * @data_size: size of the buffer to which the variable value is copied + * @data: buffer to which the variable value is copied + * Return: status code + */ +efi_status_t EFIAPI efi_get_variable(u16 *name, const efi_guid_t *guid, + u32 *attr, efi_uintn_t *data_size, + void *data) +{ + struct smm_variable_access *var_acc; + efi_uintn_t payload_size; + efi_uintn_t name_size; + efi_uintn_t tmp_dsize; + u8 *comm_buf = NULL; + efi_status_t ret; + + EFI_ENTRY("\"%ls\" %pUl %p %p %p", name, guid, attr, data_size, data); + + if (!name || !guid || !data_size) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + /* Check payload size */ + name_size = u16_strsize(name); + if (name_size > max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + /* Trim output buffer size */ + tmp_dsize = *data_size; + if (name_size + tmp_dsize > + max_payload_size - MM_VARIABLE_ACCESS_HEADER_SIZE) { + tmp_dsize = max_payload_size - + MM_VARIABLE_ACCESS_HEADER_SIZE - + name_size; + } + + /* Get communication buffer and initialize header */ + payload_size = MM_VARIABLE_ACCESS_HEADER_SIZE + name_size + tmp_dsize; + comm_buf = setup_mm_hdr((void **)&var_acc, payload_size, + SMM_VARIABLE_FUNCTION_GET_VARIABLE, &ret); + if (!comm_buf) + goto out; + + /* Fill in contents */ + guidcpy(&var_acc->guid, guid); + var_acc->data_size = tmp_dsize; + var_acc->name_size = name_size; + var_acc->attr = attr ? *attr : 0; + memcpy(var_acc->name, name, name_size); + + /* Communicate */ + ret = mm_communicate(comm_buf, payload_size); + if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL) { + /* Update with reported data size for trimmed case */ + *data_size = var_acc->data_size; + } + if (ret != EFI_SUCCESS) + goto out; + + if (attr) + *attr = var_acc->attr; + if (data) + memcpy(data, (u8 *)var_acc->name + var_acc->name_size, + var_acc->data_size); + else + ret = EFI_INVALID_PARAMETER; + +out: + free(comm_buf); + return EFI_EXIT(ret); +} + +/** + * efi_get_next_variable_name() - enumerate the current variable names + * + * @variable_name_size: size of variable_name buffer in bytes + * @variable_name: name of uefi variable's name in u16 + * @guid: vendor's guid + * + * This function implements the GetNextVariableName service. + * + * See the Unified Extensible Firmware Interface (UEFI) specification for + * details. + * + * Return: status code + */ +efi_status_t EFIAPI efi_get_next_variable_name(efi_uintn_t *variable_name_size, + u16 *variable_name, + efi_guid_t *guid) +{ + struct smm_variable_getnext *var_getnext; + efi_uintn_t payload_size; + efi_uintn_t out_name_size; + efi_uintn_t in_name_size; + efi_uintn_t tmp_dsize; + efi_uintn_t name_size; + u8 *comm_buf = NULL; + efi_status_t ret; + + EFI_ENTRY("%p \"%ls\" %pUl", variable_name_size, variable_name, guid); + + if (!variable_name_size || !variable_name || !guid) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + out_name_size = *variable_name_size; + in_name_size = u16_strsize(variable_name); + + if (out_name_size < in_name_size) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + name_size = u16_strsize(variable_name); + if (name_size > max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + /* Trim output buffer size */ + tmp_dsize = *variable_name_size; + if (name_size + tmp_dsize > + max_payload_size - MM_VARIABLE_GET_NEXT_HEADER_SIZE) { + tmp_dsize = max_payload_size - + MM_VARIABLE_GET_NEXT_HEADER_SIZE - + name_size; + } + + payload_size = MM_VARIABLE_GET_NEXT_HEADER_SIZE + out_name_size; + comm_buf = setup_mm_hdr((void **)&var_getnext, payload_size, + SMM_VARIABLE_FUNCTION_GET_NEXT_VARIABLE_NAME, + &ret); + if (!comm_buf) + goto out; + + /* Fill in contents */ + guidcpy(&var_getnext->guid, guid); + var_getnext->name_size = out_name_size; + memcpy(var_getnext->name, variable_name, in_name_size); + memset((u8 *)var_getnext->name + in_name_size, 0x0, + out_name_size - in_name_size); + + /* Communicate */ + ret = mm_communicate(comm_buf, payload_size); + if (ret == EFI_SUCCESS || ret == EFI_BUFFER_TOO_SMALL) { + /* Update with reported data size for trimmed case */ + *variable_name_size = var_getnext->name_size; + } + if (ret != EFI_SUCCESS) + goto out; + + guidcpy(guid, &var_getnext->guid); + memcpy(variable_name, (u8 *)var_getnext->name, + var_getnext->name_size); + +out: + free(comm_buf); + return EFI_EXIT(ret); +} + +/** + * efi_set_variable() - set value of a UEFI variable + * + * This function implements the SetVariable runtime service. + * + * See the Unified Extensible Firmware Interface (UEFI) specification for + * details. + * + * @name: name of the variable + * @guid: vendor GUID + * @attr: attributes of the variable + * @data_size: size of the buffer with the variable value + * @data: buffer with the variable value + * Return: status code + */ +efi_status_t EFIAPI efi_set_variable(u16 *name, const efi_guid_t *guid, + u32 attr, efi_uintn_t data_size, + const void *data) +{ + struct smm_variable_access *var_acc; + efi_uintn_t payload_size; + efi_uintn_t name_size; + u8 *comm_buf = NULL; + efi_status_t ret; + + EFI_ENTRY("\"%ls\" %pUl %x %zu %p", name, guid, attr, data_size, data); + + if (!name || name[0] == 0 || !guid) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + if (data_size > 0 && !data) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + /* Check payload size */ + name_size = u16_strsize(name); + payload_size = MM_VARIABLE_ACCESS_HEADER_SIZE + name_size + data_size; + if (payload_size > max_payload_size) { + ret = EFI_INVALID_PARAMETER; + goto out; + } + + /* Get communication buffer and initialize header */ + comm_buf = setup_mm_hdr((void **)&var_acc, payload_size, + SMM_VARIABLE_FUNCTION_SET_VARIABLE, &ret); + if (!comm_buf) + goto out; + + /* Fill in contents */ + guidcpy(&var_acc->guid, guid); + var_acc->data_size = data_size; + var_acc->name_size = name_size; + var_acc->attr = attr; + memcpy(var_acc->name, name, name_size); + memcpy((u8 *)var_acc->name + name_size, data, data_size); + + /* Communicate */ + ret = mm_communicate(comm_buf, payload_size); + +out: + free(comm_buf); + return EFI_EXIT(ret); +} + +/** + * efi_query_variable_info() - get information about EFI variables + * + * This function implements the QueryVariableInfo() runtime service. + * + * See the Unified Extensible Firmware Interface (UEFI) specification for + * details. + * + * @attributes: bitmask to select variables to be + * queried + * @maximum_variable_storage_size: maximum size of storage area for the + * selected variable types + * @remaining_variable_storage_size: remaining size of storage are for the + * selected variable types + * @maximum_variable_size: maximum size of a variable of the + * selected type + * Returns: status code + */ +efi_status_t EFIAPI __efi_runtime +efi_query_variable_info(u32 attributes, u64 *max_variable_storage_size, + u64 *remain_variable_storage_size, + u64 *max_variable_size) +{ + struct smm_variable_query_info *mm_query_info; + efi_uintn_t payload_size; + efi_status_t ret; + u8 *comm_buf; + + EFI_ENTRY("%x %p %p %p", attributes, max_variable_storage_size, + remain_variable_storage_size, max_variable_size); + + payload_size = sizeof(*mm_query_info); + comm_buf = setup_mm_hdr((void **)&mm_query_info, payload_size, + SMM_VARIABLE_FUNCTION_QUERY_VARIABLE_INFO, + &ret); + if (!comm_buf) + goto out; + + mm_query_info->attr = attributes; + ret = mm_communicate(comm_buf, payload_size); + if (ret != EFI_SUCCESS) + goto out; + *max_variable_storage_size = mm_query_info->max_variable_storage; + *remain_variable_storage_size = + mm_query_info->remaining_variable_storage; + *max_variable_size = mm_query_info->max_variable_size; + +out: + free(comm_buf); + return EFI_EXIT(ret); +} + +/** + * efi_get_variable_runtime() - runtime implementation of GetVariable() + * + * @variable_name: name of the variable + * @guid: vendor GUID + * @attributes: attributes of the variable + * @data_size: size of the buffer to which the variable value is copied + * @data: buffer to which the variable value is copied + * Return: status code + */ +static efi_status_t __efi_runtime EFIAPI +efi_get_variable_runtime(u16 *variable_name, const efi_guid_t *guid, + u32 *attributes, efi_uintn_t *data_size, void *data) +{ + return EFI_UNSUPPORTED; +} + +/** + * efi_get_next_variable_name_runtime() - runtime implementation of + * GetNextVariable() + * + * @variable_name_size: size of variable_name buffer in byte + * @variable_name: name of uefi variable's name in u16 + * @guid: vendor's guid + * Return: status code + */ +static efi_status_t __efi_runtime EFIAPI +efi_get_next_variable_name_runtime(efi_uintn_t *variable_name_size, + u16 *variable_name, efi_guid_t *guid) +{ + return EFI_UNSUPPORTED; +} + +/** + * efi_query_variable_info() - get information about EFI variables + * + * This function implements the QueryVariableInfo() runtime service. + * + * See the Unified Extensible Firmware Interface (UEFI) specification for + * details. + * + * @attributes: bitmask to select variables to be + * queried + * @maximum_variable_storage_size: maximum size of storage area for the + * selected variable types + * @remaining_variable_storage_size: remaining size of storage are for the + * selected variable types + * @maximum_variable_size: maximum size of a variable of the + * selected type + * Return: status code + */ +efi_status_t EFIAPI __efi_runtime +efi_query_variable_info_runtime(u32 attributes, u64 *max_variable_storage_size, + u64 *remain_variable_storage_size, + u64 *max_variable_size) +{ + return EFI_UNSUPPORTED; +} + +/** + * efi_set_variable_runtime() - runtime implementation of SetVariable() + * + * @variable_name: name of the variable + * @guid: vendor GUID + * @attributes: attributes of the variable + * @data_size: size of the buffer with the variable value + * @data: buffer with the variable value + * Return: status code + */ +static efi_status_t __efi_runtime EFIAPI +efi_set_variable_runtime(u16 *variable_name, const efi_guid_t *guid, + u32 attributes, efi_uintn_t data_size, + const void *data) +{ + return EFI_UNSUPPORTED; +} + +/** + * efi_variables_boot_exit_notify() - notify ExitBootServices() is called + */ +void efi_variables_boot_exit_notify(void) +{ + u8 *comm_buf; + efi_status_t ret; + + comm_buf = setup_mm_hdr(NULL, 0, + SMM_VARIABLE_FUNCTION_EXIT_BOOT_SERVICE, &ret); + if (comm_buf) + ret = mm_communicate(comm_buf, 0); + else + ret = EFI_NOT_FOUND; + + if (ret != EFI_SUCCESS) + log_err("Unable to notify StMM for ExitBootServices\n"); + free(comm_buf); + + /* Update runtime service table */ + efi_runtime_services.query_variable_info = + efi_query_variable_info_runtime; + efi_runtime_services.get_variable = efi_get_variable_runtime; + efi_runtime_services.get_next_variable_name = + efi_get_next_variable_name_runtime; + efi_runtime_services.set_variable = efi_set_variable_runtime; + efi_update_table_header_crc32(&efi_runtime_services.hdr); +} + +/** + * efi_init_variables() - initialize variable services + * + * Return: status code + */ +efi_status_t efi_init_variables(void) +{ + efi_status_t ret; + + ret = get_max_payload(&max_payload_size); + if (ret != EFI_SUCCESS) + return ret; + + max_buffer_size = MM_COMMUNICATE_HEADER_SIZE + + MM_VARIABLE_COMMUNICATE_SIZE + + max_payload_size; + + return EFI_SUCCESS; +} From patchwork Fri May 15 19:53:03 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ilias Apalodimas X-Patchwork-Id: 245865 List-Id: U-Boot discussion From: ilias.apalodimas at linaro.org (Ilias Apalodimas) Date: Fri, 15 May 2020 22:53:03 +0300 Subject: [PATCH 3/6 v3] cmd: efidebug: Add support for querying UEFI variable storage In-Reply-To: <20200515195306.522742-1-ilias.apalodimas@linaro.org> References: <20200515195306.522742-1-ilias.apalodimas@linaro.org> Message-ID: <20200515195306.522742-4-ilias.apalodimas@linaro.org> With the previous patches that use OP-TEE and StandAloneMM for UEFI variable storage we've added functionality for efi_query_variable_info. So let's add the relevant command to efidebug and retrieve information about the container used to store UEFI variables Signed-off-by: Ilias Apalodimas Reviewed-by: Heinrich Schuchardt --- cmd/efidebug.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 59 insertions(+), 1 deletion(-) diff --git a/cmd/efidebug.c b/cmd/efidebug.c index d8a76d78a388..aa7637d1e4b7 100644 --- a/cmd/efidebug.c +++ b/cmd/efidebug.c @@ -1160,6 +1160,60 @@ static int do_efi_test(cmd_tbl_t *cmdtp, int flag, return cp->cmd(cmdtp, flag, argc, argv); } +/** + * do_efi_query_info() - QueryVariableInfo EFI service + * + * @cmdtp: Command table + * @flag: Command flag + * @argc: Number of arguments + * @argv: Argument array + * Return: CMD_RET_SUCCESS on success, + * CMD_RET_USAGE or CMD_RET_FAILURE on failure + * + * Implement efidebug "test" sub-command. + */ + +static int do_efi_query_info(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + efi_status_t ret; + u32 attr = 0; + u64 max_variable_storage_size; + u64 remain_variable_storage_size; + u64 max_variable_size; + int i; + + for (i = 1; i < argc; i++) { + if (!strcmp(argv[i], "-bs")) + attr |= EFI_VARIABLE_BOOTSERVICE_ACCESS; + else if (!strcmp(argv[i], "-rt")) + attr |= EFI_VARIABLE_RUNTIME_ACCESS; + else if (!strcmp(argv[i], "-nv")) + attr |= EFI_VARIABLE_NON_VOLATILE; + else if (!strcmp(argv[i], "-at")) + attr |= + EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS; + } + if (!attr) + attr = EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | + EFI_VARIABLE_BOOTSERVICE_ACCESS | + EFI_VARIABLE_RUNTIME_ACCESS | + EFI_VARIABLE_NON_VOLATILE; + + ret = EFI_CALL(efi_query_variable_info(attr, + &max_variable_storage_size, + &remain_variable_storage_size, + &max_variable_size)); + if (ret != EFI_SUCCESS) + return CMD_RET_FAILURE; + + printf("Max storage size %llu\n", max_variable_storage_size); + printf("Remaining storage size %llu\n", remain_variable_storage_size); + printf("Max variable size %llu\n", max_variable_size); + + return CMD_RET_SUCCESS; +} + static cmd_tbl_t cmd_efidebug_sub[] = { U_BOOT_CMD_MKENT(boot, CONFIG_SYS_MAXARGS, 1, do_efi_boot_opt, "", ""), U_BOOT_CMD_MKENT(devices, CONFIG_SYS_MAXARGS, 1, do_efi_show_devices, @@ -1176,6 +1230,8 @@ static cmd_tbl_t cmd_efidebug_sub[] = { "", ""), U_BOOT_CMD_MKENT(test, CONFIG_SYS_MAXARGS, 1, do_efi_test, "", ""), + U_BOOT_CMD_MKENT(query, CONFIG_SYS_MAXARGS, 1, do_efi_query_info, + "", ""), }; /** @@ -1247,7 +1303,9 @@ static char efidebug_help_text[] = "efidebug tables\n" " - show UEFI configuration tables\n" "efidebug test bootmgr\n" - " - run simple bootmgr for test\n"; + " - run simple bootmgr for test\n" + "efidebug query [-nv][-bs][-rt][-at]\n" + " - show size of UEFI variables store\n"; #endif U_BOOT_CMD( From patchwork Fri May 15 19:53:04 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ilias Apalodimas X-Patchwork-Id: 245866 List-Id: U-Boot discussion From: ilias.apalodimas at linaro.org (Ilias Apalodimas) Date: Fri, 15 May 2020 22:53:04 +0300 Subject: [PATCH 4/6 v3] MAINTAINERS: Add maintainer for EFI variables via OP-TEE In-Reply-To: <20200515195306.522742-1-ilias.apalodimas@linaro.org> References: <20200515195306.522742-1-ilias.apalodimas@linaro.org> Message-ID: <20200515195306.522742-5-ilias.apalodimas@linaro.org> Add myself as maintainer for the OP-TEE related UEFI variable storage. Signed-off-by: Ilias Apalodimas Reviewed-by: Heinrich Schuchardt --- MAINTAINERS | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index ec59ce8b8802..0c38890be09c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -635,6 +635,12 @@ F: cmd/efidebug.c F: cmd/nvedit_efi.c F: tools/file2include.c +EFI VARIABLES VIA OP-TEE +M: Ilias Apalodimas +S: Maintained +F: lib/efi_loader/efi_variable_tee.c +F: include/mm_communication.h + ENVIRONMENT M: Joe Hershberger R: Wolfgang Denk From patchwork Fri May 15 19:53:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ilias Apalodimas X-Patchwork-Id: 245868 List-Id: U-Boot discussion From: ilias.apalodimas at linaro.org (Ilias Apalodimas) Date: Fri, 15 May 2020 22:53:05 +0300 Subject: [PATCH 5/6 v3] doc: uefi.rst: Add OP-TEE variable storage config options In-Reply-To: <20200515195306.522742-1-ilias.apalodimas@linaro.org> References: <20200515195306.522742-1-ilias.apalodimas@linaro.org> Message-ID: <20200515195306.522742-6-ilias.apalodimas@linaro.org> If OP-TEE is compiled with an EDK2 application running in secure world it can process and store UEFI variables in an RPMB. Add documentation for the config options enabling this. Signed-off-by: Ilias Apalodimas Reviewed-by: Heinrich Schuchardt --- doc/uefi/uefi.rst | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/doc/uefi/uefi.rst b/doc/uefi/uefi.rst index 4fda00d68721..03d6fd0c6aa8 100644 --- a/doc/uefi/uefi.rst +++ b/doc/uefi/uefi.rst @@ -188,6 +188,23 @@ on the sandbox cd pytest.py test/py/tests/test_efi_secboot/test_signed.py --bd sandbox +Using OP-TEE for EFI variables +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Instead of implementing UEFI variable services inside U-Boot they can +also be provided in the secure world by a module for OP-TEE[1]. The +interface between U-Boot and OP-TEE for variable services is enabled by +CONFIG_EFI_MM_COMM_TEE=y. + +Tianocore EDK II's standalone management mode driver for variables can +be linked to OP-TEE for this purpose. This module uses the Replay +Protected Memory Block (RPMB) of an eMMC device for persisting +non-volatile variables. When calling the variable services via the +OP-TEE API U-Boot's OP-TEE supplicant relays calls to the RPMB driver +which has to be enabled via CONFIG_SUPPORT_EMMC_RPMB=y. + +[1] https://optee.readthedocs.io/ - OP-TEE documentation + Executing the boot manager ~~~~~~~~~~~~~~~~~~~~~~~~~~ From patchwork Fri May 15 19:53:06 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ilias Apalodimas X-Patchwork-Id: 245869 List-Id: U-Boot discussion From: ilias.apalodimas at linaro.org (Ilias Apalodimas) Date: Fri, 15 May 2020 22:53:06 +0300 Subject: [PATCH 6/6 v3] configs: lx2160a: Add default config for lx2160a using StMM in OP-TEE In-Reply-To: <20200515195306.522742-1-ilias.apalodimas@linaro.org> References: <20200515195306.522742-1-ilias.apalodimas@linaro.org> Message-ID: <20200515195306.522742-7-ilias.apalodimas@linaro.org> Previous patches allow UEFI secure variables to be stored in an RPMB device using OPTEE. Add a config for the lx2160a hardware so the feature gets at least compiled. Signed-off-by: Ilias Apalodimas --- configs/lx2160ardb_tfa_stmm_defconfig | 78 +++++++++++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 configs/lx2160ardb_tfa_stmm_defconfig diff --git a/configs/lx2160ardb_tfa_stmm_defconfig b/configs/lx2160ardb_tfa_stmm_defconfig new file mode 100644 index 000000000000..42d0d45ef0f1 --- /dev/null +++ b/configs/lx2160ardb_tfa_stmm_defconfig @@ -0,0 +1,78 @@ +CONFIG_ARM=y +CONFIG_TARGET_LX2160ARDB=y +CONFIG_TFABOOT=y +CONFIG_SYS_TEXT_BASE=0x82000000 +CONFIG_SYS_MALLOC_F_LEN=0x6000 +CONFIG_DM_GPIO=y +CONFIG_EMC2305=y +CONFIG_FSPI_AHB_EN_4BYTE=y +CONFIG_NR_DRAM_BANKS=3 +CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y +CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y +CONFIG_AHCI=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=10 +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyAMA0,115200 root=/dev/ram0 earlycon=pl011,mmio32,0x21c0000 ramdisk_size=0x2000000 default_hugepagesz=1024m hugepagesz=1024m hugepages=2 pci=pcie_bus_perf" +# CONFIG_USE_BOOTCOMMAND is not set +CONFIG_CMD_BOOTEFI_SELFTEST=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_NVEDIT_EFI=y +CONFIG_CMD_EEPROM=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +# CONFIG_CMD_MMC_RPMB is not set +CONFIG_CMD_PCI=y +CONFIG_CMD_USB=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EFIDEBUG=y +CONFIG_MP=y +CONFIG_OF_CONTROL=y +CONFIG_OF_BOARD_FIXUP=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-lx2160a-rdb" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_TFTP_BLOCKSIZE=512 +CONFIG_DM=y +CONFIG_SATA_CEVA=y +CONFIG_FSL_CAAM=y +CONFIG_DM_I2C=y +CONFIG_I2C_SET_DEFAULT_BUS_NUM=y +CONFIG_I2C_DEFAULT_BUS_NUMBER=0 +CONFIG_DM_MMC=y +CONFIG_SUPPORT_EMMC_RPMB=y +CONFIG_FSL_ESDHC=y +CONFIG_DM_SPI_FLASH=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHYLIB=y +CONFIG_PHY_AQUANTIA=y +CONFIG_PHY_ATHEROS=y +CONFIG_PHY_CORTINA=y +CONFIG_E1000=y +CONFIG_PCI=y +CONFIG_DM_PCI=y +CONFIG_DM_PCI_COMPAT=y +CONFIG_PCIE_LAYERSCAPE=y +CONFIG_PCIE_LAYERSCAPE_GEN4=y +CONFIG_DM_RTC=y +CONFIG_RTC_PCF2127=y +CONFIG_DM_SCSI=y +CONFIG_DM_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_NXP_FSPI=y +CONFIG_TEE=y +CONFIG_OPTEE=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +# CONFIG_FAT_WRITE is not set +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y +CONFIG_EFI_MM_COMM_TEE=y +CONFIG_OPTEE_TZDRAM_SIZE=0x00000000