From patchwork Fri Jul 10 09:23:19 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 241268 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Fri, 10 Jul 2020 14:53:19 +0530 Subject: [PATCH v4 1/7] configs: ns3: enable pinctrl driver In-Reply-To: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> References: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710092325.5524-2-rayagonda.kokatanur@broadcom.com> Enable pinctrl driver for ns3. Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- configs/bcm_ns3_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 9adb44cb51..328b0e2b4e 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -14,12 +14,15 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot> " CONFIG_SYS_XTRACE="n" +# CONFIG_CMD_PINMUX is not set # CONFIG_CMD_SOURCE is not set CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="ns3-board" CONFIG_DM=y CONFIG_CLK=y CONFIG_CLK_CCF=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_SINGLE=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y CONFIG_SPL_OF_LIBFDT=y From patchwork Fri Jul 10 09:23:20 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 241269 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Fri, 10 Jul 2020 14:53:20 +0530 Subject: [PATCH v4 2/7] dt-bindings: pinctrl: add ns3 pads definition In-Reply-To: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> References: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710092325.5524-3-rayagonda.kokatanur@broadcom.com> Add NS3 pads definitions. Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- .../dt-bindings/pinctrl/brcm,pinctrl-ns3.h | 41 +++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h diff --git a/include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h b/include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h new file mode 100644 index 0000000000..81ebd58ca5 --- /dev/null +++ b/include/dt-bindings/pinctrl/brcm,pinctrl-ns3.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020 Broadcom. + */ + +#ifndef __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__ +#define __DT_BINDINGS_PINCTRL_BRCM_STINGRAY_H__ + +/* Alternate functions available in MUX controller */ +#define MODE_NITRO 0 +#define MODE_NAND 1 +#define MODE_PNOR 2 +#define MODE_GPIO 3 + +/* Pad configuration attribute */ +#define PAD_SLEW_RATE_ENA BIT(0) +#define PAD_SLEW_RATE_ENA_MASK BIT(0) + +#define PAD_DRIVE_STRENGTH_2_MA (0 << 1) +#define PAD_DRIVE_STRENGTH_4_MA BIT(1) +#define PAD_DRIVE_STRENGTH_6_MA (2 << 1) +#define PAD_DRIVE_STRENGTH_8_MA (3 << 1) +#define PAD_DRIVE_STRENGTH_10_MA (4 << 1) +#define PAD_DRIVE_STRENGTH_12_MA (5 << 1) +#define PAD_DRIVE_STRENGTH_14_MA (6 << 1) +#define PAD_DRIVE_STRENGTH_16_MA (7 << 1) +#define PAD_DRIVE_STRENGTH_MASK (7 << 1) + +#define PAD_PULL_UP_ENA BIT(4) +#define PAD_PULL_UP_ENA_MASK BIT(4) + +#define PAD_PULL_DOWN_ENA BIT(5) +#define PAD_PULL_DOWN_ENA_MASK BIT(5) + +#define PAD_INPUT_PATH_DIS BIT(6) +#define PAD_INPUT_PATH_DIS_MASK BIT(6) + +#define PAD_HYSTERESIS_ENA BIT(7) +#define PAD_HYSTERESIS_ENA_MASK BIT(7) + +#endif From patchwork Fri Jul 10 09:23:21 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 241270 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Fri, 10 Jul 2020 14:53:21 +0530 Subject: [PATCH v4 3/7] configs: ns3: enable BCM IPROC mmc driver In-Reply-To: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> References: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710092325.5524-4-rayagonda.kokatanur@broadcom.com> Enable BCM IPROC mmc driver ns3. Enable DMA for MMC Host to have better reads and writes. Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- configs/bcm_ns3_defconfig | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 328b0e2b4e..432237b56d 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -21,6 +21,10 @@ CONFIG_DEFAULT_DEVICE_TREE="ns3-board" CONFIG_DM=y CONFIG_CLK=y CONFIG_CLK_CCF=y +CONFIG_DM_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SDMA=y +CONFIG_MMC_SDHCI_IPROC=y CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_DM_SERIAL=y From patchwork Fri Jul 10 09:23:22 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 241271 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Fri, 10 Jul 2020 14:53:22 +0530 Subject: [PATCH v4 4/7] configs: ns3: enable mmc commands In-Reply-To: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> References: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710092325.5524-5-rayagonda.kokatanur@broadcom.com> Enable mmc commands for NS3. Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- configs/bcm_ns3_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 432237b56d..a1ee866e54 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -14,6 +14,8 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot> " CONFIG_SYS_XTRACE="n" +CONFIG_CMD_MMC=y +CONFIG_CMD_MMC_SWRITE=y # CONFIG_CMD_PINMUX is not set # CONFIG_CMD_SOURCE is not set CONFIG_OF_CONTROL=y From patchwork Fri Jul 10 09:23:23 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 241272 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Fri, 10 Jul 2020 14:53:23 +0530 Subject: [PATCH v4 5/7] configs: ns3: enable gpt commands In-Reply-To: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> References: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710092325.5524-6-rayagonda.kokatanur@broadcom.com> Enable gpt commands for ns3. Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- configs/bcm_ns3_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index a1ee866e54..0f23f30db2 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -14,6 +14,8 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_HUSH_PARSER=y CONFIG_SYS_PROMPT="u-boot> " CONFIG_SYS_XTRACE="n" +CONFIG_CMD_GPT=y +CONFIG_CMD_GPT_RENAME=y CONFIG_CMD_MMC=y CONFIG_CMD_MMC_SWRITE=y # CONFIG_CMD_PINMUX is not set From patchwork Fri Jul 10 09:23:24 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 241273 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Fri, 10 Jul 2020 14:53:24 +0530 Subject: [PATCH v4 6/7] configs: ns3: enable EXT4 and FAT fs support In-Reply-To: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> References: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710092325.5524-7-rayagonda.kokatanur@broadcom.com> Enable EXT4 and FAT fs support for ns3. Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- configs/bcm_ns3_defconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 0f23f30db2..66fbdb20d6 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -20,6 +20,10 @@ CONFIG_CMD_MMC=y CONFIG_CMD_MMC_SWRITE=y # CONFIG_CMD_PINMUX is not set # CONFIG_CMD_SOURCE is not set +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +# CONFIG_DOS_PARTITION is not set CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="ns3-board" CONFIG_DM=y @@ -33,4 +37,5 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_FAT_WRITE=y CONFIG_SPL_OF_LIBFDT=y From patchwork Fri Jul 10 09:23:25 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Rayagonda Kokatanur X-Patchwork-Id: 241274 List-Id: U-Boot discussion From: rayagonda.kokatanur at broadcom.com (Rayagonda Kokatanur) Date: Fri, 10 Jul 2020 14:53:25 +0530 Subject: [PATCH v4 7/7] configs: ns3: enable sp805 watchdog driver In-Reply-To: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> References: <20200710092325.5524-1-rayagonda.kokatanur@broadcom.com> Message-ID: <20200710092325.5524-8-rayagonda.kokatanur@broadcom.com> Enable sp805 watchdog driver for ns3. Signed-off-by: Rayagonda Kokatanur Reviewed-by: Simon Glass --- configs/bcm_ns3_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/configs/bcm_ns3_defconfig b/configs/bcm_ns3_defconfig index 66fbdb20d6..ab26617158 100644 --- a/configs/bcm_ns3_defconfig +++ b/configs/bcm_ns3_defconfig @@ -37,5 +37,7 @@ CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y +CONFIG_WDT=y +CONFIG_WDT_SP805=y CONFIG_FAT_WRITE=y CONFIG_SPL_OF_LIBFDT=y