From patchwork Fri Jan 17 07:45:58 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Weijie Gao X-Patchwork-Id: 239702 List-Id: U-Boot discussion From: weijie.gao at mediatek.com (Weijie Gao) Date: Fri, 17 Jan 2020 15:45:58 +0800 Subject: [PATCH v2 11/21] dts: mtmips: remove all unusable nodes and properties from mt7628s.dtsi Message-ID: <1579247158-32706-1-git-send-email-weijie.gao@mediatek.com> This patch removes all unused and unusable nodes and properties from mt7628s.dtsi. Signed-off-by: Weijie Gao --- Changes since v1: splitted from another patch --- arch/mips/dts/mt7628a.dtsi | 68 -------------------------------------- 1 file changed, 68 deletions(-) diff --git a/arch/mips/dts/mt7628a.dtsi b/arch/mips/dts/mt7628a.dtsi index cdc643fe37..3d7b839e6d 100644 --- a/arch/mips/dts/mt7628a.dtsi +++ b/arch/mips/dts/mt7628a.dtsi @@ -7,24 +7,6 @@ #size-cells = <1>; compatible = "ralink,mt7628a-soc"; - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu at 0 { - compatible = "mti,mips24KEc"; - device_type = "cpu"; - reg = <0>; - }; - }; - - cpuintc: interrupt-controller { - #address-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - compatible = "mti,cpu-interrupt-controller"; - }; - clk48m: clk48m at 0 { compatible = "fixed-clock"; @@ -41,11 +23,6 @@ #address-cells = <1>; #size-cells = <1>; - sysc: system-controller at 0 { - compatible = "ralink,mt7620a-sysc", "syscon"; - reg = <0x0 0x100>; - }; - resetctl-reboot { compatible = "resetctl-reboot"; @@ -223,32 +200,6 @@ resets = <&rstctrl MT7628_TIMER_RST>; reset-names = "wdt"; - - interrupt-parent = <&intc>; - interrupts = <24>; - }; - - intc: interrupt-controller at 200 { - compatible = "ralink,rt2880-intc"; - reg = <0x200 0x100>; - - interrupt-controller; - #interrupt-cells = <1>; - - resets = <&rstctrl MT7628_INT_RST>; - reset-names = "intc"; - - interrupt-parent = <&cpuintc>; - interrupts = <2>; - - ralink,intc-registers = <0x9c 0xa0 - 0x6c 0xa4 - 0x80 0x78>; - }; - - memory-controller at 300 { - compatible = "ralink,mt7620a-memc"; - reg = <0x300 0x100>; }; gpio at 600 { @@ -261,9 +212,6 @@ resets = <&rstctrl MT7628_PIO_RST>; reset-names = "pio"; - interrupt-parent = <&intc>; - interrupts = <6>; - gpio0: bank at 0 { reg = <0>; compatible = "mtk,mt7621-gpio-bank"; @@ -311,9 +259,6 @@ resets = <&rstctrl MT7628_UART0_RST>; reset-names = "uart0"; - interrupt-parent = <&intc>; - interrupts = <20>; - reg-shift = <2>; }; @@ -329,9 +274,6 @@ resets = <&rstctrl MT7628_UART1_RST>; reset-names = "uart1"; - interrupt-parent = <&intc>; - interrupts = <21>; - reg-shift = <2>; }; @@ -347,9 +289,6 @@ resets = <&rstctrl MT7628_UART2_RST>; reset-names = "uart2"; - interrupt-parent = <&intc>; - interrupts = <22>; - reg-shift = <2>; }; }; @@ -361,8 +300,6 @@ resets = <&rstctrl MT7628_EPHY_RST>; reset-names = "ephy"; - - syscon = <&sysc>; }; usb_phy: usb-phy at 10120000 { @@ -371,8 +308,6 @@ #phy-cells = <0>; - ralink,sysctl = <&sysc>; - resets = <&rstctrl MT7628_UPHY_RST>; reset-names = "phy"; @@ -386,9 +321,6 @@ phys = <&usb_phy>; phy-names = "usb"; - - interrupt-parent = <&intc>; - interrupts = <18>; }; mmc: mmc at 10130000 {