From patchwork Wed Apr 29 12:16:05 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Marek Bykowski X-Patchwork-Id: 238867 List-Id: U-Boot discussion From: marek.bykowski at gmail.com (marek.bykowski at gmail.com) Date: Wed, 29 Apr 2020 14:16:05 +0200 Subject: [PATCH] malloc: dlmalloc: add an ability for the malloc to be re-init/init multiple times Message-ID: <20200429121605.16910-1-marek.bykowski@gmail.com> From: Marek Bykowski Malloc gets initialized with a call to mem_malloc_init() with the address the allocation starts to and its size. Currently it is not possible to move the malloc from one memory area to another as the malloc would eventually fail. This patch adds in the ability to re-init the malloc with the updated start address and the size. One of the use cases of this feature is SPL U-Boot running from within the static memory and calling to malloc init from within board_init_f(): arch/arm/cpu/armv8/start.S:reset vector arch/arm/cpu/armv8/start.S:main() arch/arm/lib/crt0_64.S:board_init_f() board//common/spl.c:board_init_f() board//common/spl.c:mem_malloc_init((ulong)CONFIG_SYS_SPL_MALLOC_START, CONFIG_SYS_SPL_MALLOC_SIZE); Shortly after the DDR (main) memory is init and ready we call to malloc init again but this time with the start address in the DDR memory and a much greater size we can allow ourselves for moving the allocation off the static to the DDR memory: board//common/spl.c:mem_malloc_init((ulong)CONFIG_SPL_MALLOC_OFFSET, CONFIG_SPL_MALLOC_SIZE); with CONFIG_SYS_SPL_MALLOC_START and CONFIG_SPL_MALLOC_OFFSET being the start addresses of the malloc in the static and DDR memories respectively and SZ_16K CONFIG_SYS_SPL_MALLOC_SIZE and SZ_2M CONFIG_SPL_MALLOC_SIZE being the sizes of the mallocs in the respective memories. Note now we have much greater memory, from 16K to 2M, available for allocation. There is an alternative approach already existing in U-Boot with a use of an early (simplified) malloc and the proper (dlamalloc) malloc however this approach necessitates managing the two mallocs whereas this one proposes uses a single dlmalloc. Signed-off-by: Marek Bykowski --- Kconfig | 14 ++++++++++++++ common/dlmalloc.c | 41 ++++++++++++++++++++++++++++++++++++++--- 2 files changed, 52 insertions(+), 3 deletions(-) diff --git a/Kconfig b/Kconfig index 1f0904f704..958553c90a 100644 --- a/Kconfig +++ b/Kconfig @@ -209,6 +209,20 @@ if EXPERT When disabling this, please check if malloc calls, maybe should be replaced by calloc - if one expects zeroed memory. +config SYS_MALLOC_DEFAULT_TO_INIT + bool "Default malloc to init while reserving the memory for it" + default n + help + It may happen that one needs to move the dynamic allocation + from one to another memory range, eg. when moving the malloc + from the limited static to a potentially large dynamic (DDR) + memory. + + If so then on top of setting the updated memory aside one + needs to bring the malloc init. + + If such a scenario is sought choose yes. + config TOOLS_DEBUG bool "Enable debug information for tools" help diff --git a/common/dlmalloc.c b/common/dlmalloc.c index 6f12a18d54..8b2796e280 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -280,6 +280,7 @@ nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Unused space (may be 0 bytes long) . . . . | + nextchunk-> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ `foot:' | Size of chunk, in bytes | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ @@ -574,6 +575,10 @@ static void malloc_bin_reloc(void) static inline void malloc_bin_reloc(void) {} #endif +#ifdef CONFIG_SYS_MALLOC_DEFAULT_TO_INIT +static void malloc_init(void); +#endif + ulong mem_malloc_start = 0; ulong mem_malloc_end = 0; ulong mem_malloc_brk = 0; @@ -604,6 +609,10 @@ void mem_malloc_init(ulong start, ulong size) mem_malloc_end = start + size; mem_malloc_brk = start; +#ifdef CONFIG_SYS_MALLOC_DEFAULT_TO_INIT + malloc_init(); +#endif + debug("using memory %#lx-%#lx for malloc()\n", mem_malloc_start, mem_malloc_end); #ifdef CONFIG_SYS_MALLOC_CLEAR_ON_INIT @@ -708,7 +717,36 @@ static unsigned int max_n_mmaps = 0; static unsigned long max_mmapped_mem = 0; #endif +#ifdef CONFIG_SYS_MALLOC_DEFAULT_TO_INIT +static void malloc_init(void) +{ + int i, j; + + debug("bins (av_ array) are at %p\n", (void *)av_); + + av_[0] = NULL; av_[1] = NULL; + for (i = 2, j = 2; i < NAV * 2 + 2; i += 2, j++) { + av_[i] = bin_at(j - 2); + av_[i + 1] = bin_at(j - 2); + + /* Just print the first few bins so that + * we can see there are alright. + */ + if (i < 10) + debug("av_[%d]=%lx av_[%d]=%lx\n", + i, (ulong)av_[i], + i + 1, (ulong)av_[i + 1]); + } + /* Init the static bookkeeping as well */ + sbrk_base = (char *)(-1); + max_sbrked_mem = 0; + max_total_mem = 0; +#ifdef DEBUG + memset((void *)¤t_mallinfo, 0, sizeof(struct mallinfo)); +#endif +} +#endif /* Debugging support @@ -1051,9 +1089,6 @@ static mchunkptr mremap_chunk(p, new_size) mchunkptr p; size_t new_size; #endif /* HAVE_MMAP */ - - - /* Extend the top-most chunk by obtaining memory from system. Main interface to sbrk (but see also malloc_trim).