From patchwork Wed Apr 8 18:57:49 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237449 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Wed, 8 Apr 2020 12:57:49 -0600 Subject: [RESEND PATCH v3 1/7] x86: fsp: Allow skipping init code when chain loading In-Reply-To: <20200408185755.116336-1-sjg@chromium.org> References: <20200408185755.116336-1-sjg@chromium.org> Message-ID: <20200408185755.116336-2-sjg@chromium.org> It is useful to be able to boot the same x86 image on a device with or without a first-stage bootloader. For example, with chromebook_coral, it is helpful for testing to be able to boot the same U-Boot (complete with FSP) on bare metal and from coreboot. It allows checking of things like CPU speed, comparing registers, ACPI tables and the like. When U-Boot is not the first-stage bootloader much of this code is not needed and can break booting. Add checks for this to the FSP code. Rather than checking for the amount of available SDRAM, just use 1GB in this situation, which should be safe. Using 2GB may run into a memory hole on some SoCs. Signed-off-by: Simon Glass --- Changes in v3: None Changes in v2: None arch/x86/lib/fsp/fsp_dram.c | 8 ++++++++ arch/x86/lib/fsp/fsp_graphics.c | 3 +++ arch/x86/lib/fsp2/fsp_dram.c | 10 ++++++++++ arch/x86/lib/fsp2/fsp_init.c | 2 +- 4 files changed, 22 insertions(+), 1 deletion(-) diff --git a/arch/x86/lib/fsp/fsp_dram.c b/arch/x86/lib/fsp/fsp_dram.c index 9ce0ddf0d3d..15e82de2fe1 100644 --- a/arch/x86/lib/fsp/fsp_dram.c +++ b/arch/x86/lib/fsp/fsp_dram.c @@ -44,6 +44,14 @@ int dram_init_banksize(void) phys_addr_t low_end; uint bank; + if (!ll_boot_init()) { + gd->bd->bi_dram[0].start = 0; + gd->bd->bi_dram[0].size = gd->ram_size; + + mtrr_add_request(MTRR_TYPE_WRBACK, 0, gd->ram_size); + return 0; + } + low_end = 0; for (bank = 1, hdr = gd->arch.hob_list; bank < CONFIG_NR_DRAM_BANKS && !end_of_hob(hdr); diff --git a/arch/x86/lib/fsp/fsp_graphics.c b/arch/x86/lib/fsp/fsp_graphics.c index 226c7e66b3f..98b762209f9 100644 --- a/arch/x86/lib/fsp/fsp_graphics.c +++ b/arch/x86/lib/fsp/fsp_graphics.c @@ -78,6 +78,9 @@ static int fsp_video_probe(struct udevice *dev) struct vesa_mode_info *vesa = &mode_info.vesa; int ret; + if (!ll_boot_init()) + return 0; + printf("Video: "); /* Initialize vesa_mode_info structure */ diff --git a/arch/x86/lib/fsp2/fsp_dram.c b/arch/x86/lib/fsp2/fsp_dram.c index 90a238a2245..74835eebcea 100644 --- a/arch/x86/lib/fsp2/fsp_dram.c +++ b/arch/x86/lib/fsp2/fsp_dram.c @@ -12,11 +12,18 @@ #include #include #include +#include int dram_init(void) { int ret; + if (!ll_boot_init()) { + /* Use a small and safe amount of 1GB */ + gd->ram_size = SZ_1G; + + return 0; + } if (spl_phase() == PHASE_SPL) { #ifdef CONFIG_HAVE_ACPI_RESUME bool s3wake = gd->arch.prev_sleep_state == ACPI_S3; @@ -68,6 +75,9 @@ int dram_init(void) ulong board_get_usable_ram_top(ulong total_size) { + if (!ll_boot_init()) + return gd->ram_size; + #if CONFIG_IS_ENABLED(HANDOFF) struct spl_handoff *ho = gd->spl_handoff; diff --git a/arch/x86/lib/fsp2/fsp_init.c b/arch/x86/lib/fsp2/fsp_init.c index da9bd6b45cf..c7dc2ea2578 100644 --- a/arch/x86/lib/fsp2/fsp_init.c +++ b/arch/x86/lib/fsp2/fsp_init.c @@ -23,7 +23,7 @@ int arch_cpu_init_dm(void) int ret; /* Make sure pads are set up early in U-Boot */ - if (spl_phase() != PHASE_BOARD_F) + if (!ll_boot_init() || spl_phase() != PHASE_BOARD_F) return 0; /* Probe all pinctrl devices to set up the pads */ From patchwork Wed Apr 8 18:57:50 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237448 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Wed, 8 Apr 2020 12:57:50 -0600 Subject: [RESEND PATCH v3 2/7] x86: apl: Skip init code when chain loading In-Reply-To: <20200408185755.116336-1-sjg@chromium.org> References: <20200408185755.116336-1-sjg@chromium.org> Message-ID: <20200408185755.116336-3-sjg@chromium.org> When U-Boot is not the first-stage bootloader the FSP-S init must be skipped. Update it to add a check. Signed-off-by: Simon Glass --- Changes in v3: None Changes in v2: None arch/x86/cpu/apollolake/fsp_s.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/cpu/apollolake/fsp_s.c b/arch/x86/cpu/apollolake/fsp_s.c index 1f22c1ea3c6..5d252b11116 100644 --- a/arch/x86/cpu/apollolake/fsp_s.c +++ b/arch/x86/cpu/apollolake/fsp_s.c @@ -566,6 +566,8 @@ int arch_fsp_init_r(void) struct udevice *dev, *itss; int ret; + if (!ll_boot_init()) + return 0; /* * This must be called before any devices are probed. Put any probing * into arch_fsps_preinit() above. From patchwork Wed Apr 8 18:57:51 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237451 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Wed, 8 Apr 2020 12:57:51 -0600 Subject: [RESEND PATCH v3 3/7] x86: cpu: Skip init code when chain loading In-Reply-To: <20200408185755.116336-1-sjg@chromium.org> References: <20200408185755.116336-1-sjg@chromium.org> Message-ID: <20200408185755.116336-4-sjg@chromium.org> When U-Boot is not the first-stage bootloader the interrupt and cache init must be skipped, as well as init for various peripherals. Update the code to add checks for this. Signed-off-by: Simon Glass --- Changes in v3: None Changes in v2: - Drop the other check in interrupt_init() which is not needed now arch/x86/cpu/cpu.c | 4 +++- arch/x86/cpu/i386/interrupt.c | 6 ++++-- arch/x86/lib/init_helpers.c | 3 +++ 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/arch/x86/cpu/cpu.c b/arch/x86/cpu/cpu.c index dae06949cc6..3db035c2c0e 100644 --- a/arch/x86/cpu/cpu.c +++ b/arch/x86/cpu/cpu.c @@ -239,8 +239,10 @@ int cpu_init_r(void) struct udevice *dev; int ret; - if (!ll_boot_init()) + if (!ll_boot_init()) { + uclass_first_device(UCLASS_PCI, &dev); return 0; + } ret = x86_init_cpus(); if (ret) diff --git a/arch/x86/cpu/i386/interrupt.c b/arch/x86/cpu/i386/interrupt.c index 4c7e9ea2151..e67a116ac1a 100644 --- a/arch/x86/cpu/i386/interrupt.c +++ b/arch/x86/cpu/i386/interrupt.c @@ -264,6 +264,9 @@ int interrupt_init(void) struct udevice *dev; int ret; + if (!ll_boot_init()) + return 0; + /* Try to set up the interrupt router, but don't require one */ ret = irq_first_device_type(X86_IRQT_BASE, &dev); if (ret && ret != -ENODEV) @@ -295,8 +298,7 @@ int interrupt_init(void) * TODO(sjg at chromium.org): But we don't handle these correctly when * booted from EFI. */ - if (ll_boot_init()) - enable_interrupts(); + enable_interrupts(); #endif return 0; diff --git a/arch/x86/lib/init_helpers.c b/arch/x86/lib/init_helpers.c index 5bb55e256fb..d906b528b35 100644 --- a/arch/x86/lib/init_helpers.c +++ b/arch/x86/lib/init_helpers.c @@ -30,6 +30,9 @@ int init_cache_f_r(void) return ret; } + if (!ll_boot_init()) + return 0; + /* Initialise the CPU cache(s) */ return init_cache(); } From patchwork Wed Apr 8 18:57:52 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237450 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Wed, 8 Apr 2020 12:57:52 -0600 Subject: [RESEND PATCH v3 4/7] pci: Avoid auto-config when chain loading In-Reply-To: <20200408185755.116336-1-sjg@chromium.org> References: <20200408185755.116336-1-sjg@chromium.org> Message-ID: <20200408125746.RESEND.v3.4.Idfdc61ea876ea7aeafb2370394ac2c922344f9b4@changeid> When U-Boot is not the first-stage bootloader we don't want to re-configure the PCI devices, since this has already been done. Add a check to avoid this. Signed-off-by: Simon Glass --- Changes in v3: None Changes in v2: - Drop patch 'dm: Avoid initing built-in devices when chain loading' drivers/pci/pci-uclass.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pci/pci-uclass.c b/drivers/pci/pci-uclass.c index e2882e3b634..94733662b12 100644 --- a/drivers/pci/pci-uclass.c +++ b/drivers/pci/pci-uclass.c @@ -1007,7 +1007,7 @@ static int pci_uclass_post_probe(struct udevice *bus) if (ret) return ret; - if (CONFIG_IS_ENABLED(PCI_PNP) && + if (CONFIG_IS_ENABLED(PCI_PNP) && ll_boot_init() && (!hose->skip_auto_config_until_reloc || (gd->flags & GD_FLG_RELOC))) { ret = pci_auto_config_devices(bus); @@ -1029,7 +1029,7 @@ static int pci_uclass_post_probe(struct udevice *bus) * Note we only call this 1) after U-Boot is relocated, and 2) * root bus has finished probing. */ - if ((gd->flags & GD_FLG_RELOC) && (bus->seq == 0)) { + if ((gd->flags & GD_FLG_RELOC) && bus->seq == 0 && ll_boot_init()) { ret = fsp_init_phase_pci(); if (ret) return ret; From patchwork Wed Apr 8 18:57:53 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237452 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Wed, 8 Apr 2020 12:57:53 -0600 Subject: [RESEND PATCH v3 5/7] board: Add a gd flag for chain loading In-Reply-To: <20200408185755.116336-1-sjg@chromium.org> References: <20200408185755.116336-1-sjg@chromium.org> Message-ID: <20200408185755.116336-5-sjg@chromium.org> When U-Boot is run from another boot loader, much of the low-level init needs to be skipped. Add a flag for this and adjust ll_boot_init() to use it. Signed-off-by: Simon Glass --- Changes in v3: - Add a new patch with a gd flag for chain loading Changes in v2: None include/asm-generic/global_data.h | 1 + include/init.h | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/include/asm-generic/global_data.h b/include/asm-generic/global_data.h index 5d027329fe0..3dc51e49ef7 100644 --- a/include/asm-generic/global_data.h +++ b/include/asm-generic/global_data.h @@ -166,5 +166,6 @@ typedef struct global_data { #define GD_FLG_SPL_EARLY_INIT 0x04000 /* Early SPL init is done */ #define GD_FLG_LOG_READY 0x08000 /* Log system is ready for use */ #define GD_FLG_WDT_READY 0x10000 /* Watchdog is ready for use */ +#define GD_FLG_NO_LL_INIT 0x20000 /* Don't perform low-level init */ #endif /* __ASM_GENERIC_GBL_DATA_H */ diff --git a/include/init.h b/include/init.h index 2a33a3fd1e4..64fdf124916 100644 --- a/include/init.h +++ b/include/init.h @@ -20,7 +20,7 @@ struct global_data; #ifdef CONFIG_EFI_STUB #define ll_boot_init() false #else -#define ll_boot_init() true +#define ll_boot_init() (!(gd->flags & GD_FLG_NO_LL_INIT)) #endif /* From patchwork Wed Apr 8 18:57:54 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237454 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Wed, 8 Apr 2020 12:57:54 -0600 Subject: [RESEND PATCH v3 6/7] x86: Add a way to detect running from coreboot In-Reply-To: <20200408185755.116336-1-sjg@chromium.org> References: <20200408185755.116336-1-sjg@chromium.org> Message-ID: <20200408185755.116336-6-sjg@chromium.org> If U-Boot is running from coreboot we need to skip low-level init. Add an way to detect this and to set the gd flag. Signed-off-by: Simon Glass --- Changes in v3: - Add new patch to detect running from coreboot Changes in v2: None arch/x86/cpu/i386/cpu.c | 15 +++++++++++++++ arch/x86/include/asm/u-boot-x86.h | 7 +++++++ 2 files changed, 22 insertions(+) diff --git a/arch/x86/cpu/i386/cpu.c b/arch/x86/cpu/i386/cpu.c index c8da7f10e9b..e43444c090b 100644 --- a/arch/x86/cpu/i386/cpu.c +++ b/arch/x86/cpu/i386/cpu.c @@ -447,10 +447,25 @@ int x86_cpu_init_f(void) return 0; } +bool x86_detect_coreboot(void) +{ + u32 *ptr, *end; + + /* We look for LBIO in the first 4K of RAM */ + for (ptr = NULL, end = ptr + 0x400; ptr < end; ptr += 4) { + if (*ptr == 0x4f49424c) /* "LBIO" */ + return true; + } + + return false; +} + int x86_cpu_reinit_f(void) { setup_identity(); setup_pci_ram_top(); + if (x86_detect_coreboot()) + gd->flags |= GD_FLG_NO_LL_INIT; return 0; } diff --git a/arch/x86/include/asm/u-boot-x86.h b/arch/x86/include/asm/u-boot-x86.h index 3e5d56d0757..654880f91cb 100644 --- a/arch/x86/include/asm/u-boot-x86.h +++ b/arch/x86/include/asm/u-boot-x86.h @@ -43,6 +43,13 @@ int x86_cpu_reinit_f(void); */ int x86_cpu_init_tpl(void); +/** + * x86_detect_coreboot() - See if U-Boot is being started from coreboot + * + * @return true if coreboot is running, false if U-Boot is running 'bare-metal' + */ +bool x86_detect_coreboot(void); + int cpu_init_f(void); void setup_gdt(struct global_data *id, u64 *gdt_addr); /* From patchwork Wed Apr 8 18:57:55 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Simon Glass X-Patchwork-Id: 237453 List-Id: U-Boot discussion From: sjg at chromium.org (Simon Glass) Date: Wed, 8 Apr 2020 12:57:55 -0600 Subject: [RESEND PATCH v3 7/7] x86: Use the existing stack when chain-loading In-Reply-To: <20200408185755.116336-1-sjg@chromium.org> References: <20200408185755.116336-1-sjg@chromium.org> Message-ID: <20200408185755.116336-7-sjg@chromium.org> With chromebook_coral we normally run TPL->SPL->U-Boot. This is the 'bare metal' case. When running from coreboot we put u-boot.bin in the RW_LEGACY portion of the image, e.g. with: cbfstool image-coral.serial.bin add-flat-binary -r RW_LEGACY \ -f /tmp/b/chromebook_coral/u-boot.bin -n altfw/u-boot \ -c lzma -l 0x1110000 -e 0x1110000 In this case U-Boot is run from coreboot (actually Depthcharge, its payload) so we cannot access CAR. Use the existing stack instead. Signed-off-by: Simon Glass --- Changes in v3: None Changes in v2: None arch/x86/cpu/start_from_spl.S | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/arch/x86/cpu/start_from_spl.S b/arch/x86/cpu/start_from_spl.S index 22cab2dd6ce..75c328fd7a8 100644 --- a/arch/x86/cpu/start_from_spl.S +++ b/arch/x86/cpu/start_from_spl.S @@ -14,18 +14,30 @@ .globl _start .type _start, @function _start: - /* Set up memory using the existing stack */ + /* + * If running from coreboot, CAR is no-longer available. Use the + * existing stack, which is large enough. + */ + call x86_detect_coreboot + cmp $0, %eax + jne use_existing_stack + movl $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %eax #ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE subl $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %eax #endif + jmp 2f /* - * We don't subject CONFIG_DCACHE_RAM_MRC_VAR_SIZE since memory is + * We don't subtract CONFIG_DCACHE_RAM_MRC_VAR_SIZE since memory is * already set up. This has the happy side-effect of putting gd in a * new place separate from SPL, so the memset() in * board_init_f_init_reserve() does not cause any problems (otherwise * it would zero out the gd and crash) */ + /* Set up memory using the existing stack */ +use_existing_stack: + mov %esp, %eax +2: call board_init_f_alloc_reserve mov %eax, %esp