From patchwork Tue Feb 11 09:39:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kuldeep Singh X-Patchwork-Id: 236136 List-Id: U-Boot discussion From: kuldeep.singh at nxp.com (Kuldeep Singh) Date: Tue, 11 Feb 2020 15:09:02 +0530 Subject: [PATCH] configs: ls1046a: Define ENV_ADDR value Message-ID: <1581413944-7958-1-git-send-email-kuldeep.singh@nxp.com> CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. Define value 0x40300000 in QSPI defconfig for LS1046ARDB as value is already defined in TFA. Correct ENV_ADDR and ENV_SECT_SIZE value for LS1046AQDS as per defconfig. Signed-off-by: Kuldeep Singh --- configs/ls1046aqds_qspi_defconfig | 3 ++- configs/ls1046aqds_tfa_defconfig | 4 ++-- configs/ls1046ardb_qspi_defconfig | 1 + 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/configs/ls1046aqds_qspi_defconfig b/configs/ls1046aqds_qspi_defconfig index 22904a0..1f28ad5 100644 --- a/configs/ls1046aqds_qspi_defconfig +++ b/configs/ls1046aqds_qspi_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_TARGET_LS1046AQDS=y CONFIG_SYS_TEXT_BASE=0x40100000 CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x10000 +CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_ENV_OFFSET=0x300000 CONFIG_FSL_LS_PPA=y CONFIG_NR_DRAM_BANKS=2 @@ -31,6 +31,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:2m(uboot),14m(free)" CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-qds-duart" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y diff --git a/configs/ls1046aqds_tfa_defconfig b/configs/ls1046aqds_tfa_defconfig index df85533..18e3993 100644 --- a/configs/ls1046aqds_tfa_defconfig +++ b/configs/ls1046aqds_tfa_defconfig @@ -3,7 +3,7 @@ CONFIG_TARGET_LS1046AQDS=y CONFIG_TFABOOT=y CONFIG_SYS_TEXT_BASE=0x82000000 CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_ENV_SECT_SIZE=0x40000 CONFIG_ENV_OFFSET=0x500000 CONFIG_NR_DRAM_BANKS=2 CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y @@ -39,7 +39,7 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_USE_ENV_SPI_BUS=y CONFIG_ENV_SPI_BUS=0 -CONFIG_ENV_ADDR=0x60500000 +CONFIG_ENV_ADDR=0x40500000 CONFIG_DM=y CONFIG_SATA_CEVA=y CONFIG_FSL_CAAM=y diff --git a/configs/ls1046ardb_qspi_defconfig b/configs/ls1046ardb_qspi_defconfig index d5e0f02..d836421 100644 --- a/configs/ls1046ardb_qspi_defconfig +++ b/configs/ls1046ardb_qspi_defconfig @@ -28,6 +28,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=1550000.spi-0:1m(rcw),15m(u-boot),48m(kernel.i CONFIG_OF_CONTROL=y CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1046a-rdb" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_ADDR=0x40300000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_SATA_CEVA=y