From patchwork Thu Feb 9 09:32:33 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Baoyou Xie X-Patchwork-Id: 93682 Delivered-To: patch@linaro.org Received: by 10.140.20.99 with SMTP id 90csp160818qgi; Thu, 9 Feb 2017 01:35:33 -0800 (PST) X-Received: by 10.99.111.138 with SMTP id k132mr2848568pgc.138.1486632933343; Thu, 09 Feb 2017 01:35:33 -0800 (PST) Return-Path: Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id z13si9601851plh.78.2017.02.09.01.35.33; Thu, 09 Feb 2017 01:35:33 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) client-ip=209.132.180.67; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org; spf=pass (google.com: best guess record for domain of linux-i2c-owner@vger.kernel.org designates 209.132.180.67 as permitted sender) smtp.mailfrom=linux-i2c-owner@vger.kernel.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752499AbdBIJfb (ORCPT + 1 other); Thu, 9 Feb 2017 04:35:31 -0500 Received: from mail-pg0-f43.google.com ([74.125.83.43]:35882 "EHLO mail-pg0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752117AbdBIJf3 (ORCPT ); Thu, 9 Feb 2017 04:35:29 -0500 Received: by mail-pg0-f43.google.com with SMTP id v184so56572923pgv.3 for ; Thu, 09 Feb 2017 01:33:52 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=umYo6uMCjEf0R8pUQqSBDZotHchv8jUJadM7Gvfxy8g=; b=Nhvf5+5jrBgEbRffLI41RRqEg+3xUHlf8uFZO+GVGz1bjoAQOH3YX9cYPQzY/pxmUb g8qTvvcoFCKmnpMv8avJD+5pD/Y+B56a+b+jbnWnEXxaE2IIrizF/MiFjUHEfENj9fwx V0x1v/PTupS1JXeisU6La2tG0+wX7+RXfvLmk= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=umYo6uMCjEf0R8pUQqSBDZotHchv8jUJadM7Gvfxy8g=; b=cWjv7POuATyh0Q4Oi0nu8EeEN49W94IqPSUB/mLjk/STfoORzElEjkSrzGUVJ+zoI8 8yeWX1uVp2781rYVIHtDIt+CCLNBsUm050MH5hOD5e0GDCem201G6GsyAqjACkr8SoUM mUuWSfqyte64XaLEhqWP3d/Jq+y8o6pjtipbw8iD6lk6fhw2sqoX0dgAID0F/Z9vHVEl YIDIYarF9rQiCFh6NRc4jCWwvGdjnClB40FfFhQNm2oi1jcrPK0eGEheRXnPxa3ZZDaw ZT+l4TgG9nVMdo44pdNaW0STD/xUBi+WDCCycfJcZ4T8ckNjLEbBRxcEc68r3ydF5+/A R2OA== X-Gm-Message-State: AMke39lygL4JQh0WtjaaH0J1xJAqRYhjV0Jaz8nmSLz2mEycNhdrsQMnMFpodqjVDe6DWe2f X-Received: by 10.98.1.213 with SMTP id 204mr2584884pfb.61.1486632831629; Thu, 09 Feb 2017 01:33:51 -0800 (PST) Received: from localhost.localdomain ([104.237.91.63]) by smtp.gmail.com with ESMTPSA id h14sm27209278pgn.41.2017.02.09.01.33.34 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Thu, 09 Feb 2017 01:33:51 -0800 (PST) From: Baoyou Xie To: shawnguo@kernel.org, andy.shevchenko@gmail.com, jun.nie@linaro.org, baoyou.xie@linaro.org, wsa@the-dreams.de, robh+dt@kernel.org, mark.rutland@arm.com Cc: linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, xie.baoyou@zte.com.cn, chen.chaokai@zte.com.cn, wang.qiang01@zte.com.cn Subject: [PATCH v6 3/3] i2c: zx2967: add i2c controller driver for ZTE's zx2967 family Date: Thu, 9 Feb 2017 17:32:33 +0800 Message-Id: <1486632753-17363-3-git-send-email-baoyou.xie@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1486632753-17363-1-git-send-email-baoyou.xie@linaro.org> References: <1486632753-17363-1-git-send-email-baoyou.xie@linaro.org> Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org This patch adds i2c controller driver for ZTE's zx2967 family. Signed-off-by: Baoyou Xie Reviewed-by: Shawn Guo --- drivers/i2c/busses/Kconfig | 9 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-zx2967.c | 676 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 686 insertions(+) create mode 100644 drivers/i2c/busses/i2c-zx2967.c -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index e4a603e..d983e36 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -1246,4 +1246,13 @@ config I2C_OPAL This driver can also be built as a module. If so, the module will be called as i2c-opal. +config I2C_ZX2967 + tristate "ZTE zx2967 I2C support" + depends on ARCH_ZX + default y + help + Selecting this option will add ZX2967 I2C driver. + This driver can also be built as a module. If so, the module will be + called i2c-zx2967. + endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index beb4809..16b2901 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o obj-$(CONFIG_I2C_XLR) += i2c-xlr.o obj-$(CONFIG_I2C_XLP9XX) += i2c-xlp9xx.o obj-$(CONFIG_I2C_RCAR) += i2c-rcar.o +obj-$(CONFIG_I2C_ZX2967) += i2c-zx2967.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c new file mode 100644 index 0000000..3a36b84 --- /dev/null +++ b/drivers/i2c/busses/i2c-zx2967.c @@ -0,0 +1,676 @@ +/* + * ZTE's zx2967 family i2c bus controller driver + * + * Copyright (C) 2017 ZTE Ltd. + * + * Author: Baoyou Xie + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include +#include +#include +#include +#include +#include + +#define REG_CMD 0x04 +#define REG_DEVADDR_H 0x0C +#define REG_DEVADDR_L 0x10 +#define REG_CLK_DIV_FS 0x14 +#define REG_CLK_DIV_HS 0x18 +#define REG_WRCONF 0x1C +#define REG_RDCONF 0x20 +#define REG_DATA 0x24 +#define REG_STAT 0x28 + +#define I2C_STOP 0 +#define I2C_MASTER BIT(0) +#define I2C_ADDR_MODE_TEN BIT(1) +#define I2C_IRQ_MSK_ENABLE BIT(3) +#define I2C_RW_READ BIT(4) +#define I2C_CMB_RW_EN BIT(5) +#define I2C_START BIT(6) + +#define I2C_ADDR_LOW_MASK GENMASK(6, 0) +#define I2C_ADDR_LOW_SHIFT 0 +#define I2C_ADDR_HI_MASK GENMASK(2, 0) +#define I2C_ADDR_HI_SHIFT 7 + +#define I2C_WFIFO_RESET BIT(7) +#define I2C_RFIFO_RESET BIT(7) + +#define I2C_IRQ_ACK_CLEAR BIT(7) +#define I2C_INT_MASK GENMASK(6, 0) + +#define I2C_TRANS_DONE BIT(0) +#define I2C_ERROR_DEVICE BIT(1) +#define I2C_ERROR_DATA BIT(2) +#define I2C_ERROR_MASK GENMASK(2, 1) + +#define I2C_SR_BUSY BIT(6) + +#define I2C_SR_EDEVICE BIT(1) +#define I2C_SR_EDATA BIT(2) + +#define I2C_FIFO_MAX 16 + +#define I2C_TIMEOUT msecs_to_jiffies(1000) + +#define DEV(i2c) (&i2c->adap.dev) + +struct zx2967_i2c_info { + spinlock_t lock; + struct i2c_adapter adap; + struct clk *clk; + struct completion complete; + u32 clk_freq; + void __iomem *reg_base; + size_t residue; + int irq; + int msg_rd; + u8 *cur_trans; + u8 access_cnt; + bool is_suspended; +}; + +static void zx2967_i2c_writel(struct zx2967_i2c_info *zx_i2c, + u32 val, unsigned long reg) +{ + writel_relaxed(val, zx_i2c->reg_base + reg); +} + +static u32 zx2967_i2c_readl(struct zx2967_i2c_info *zx_i2c, unsigned long reg) +{ + return readl_relaxed(zx_i2c->reg_base + reg); +} + +static void zx2967_i2c_writesb(struct zx2967_i2c_info *zx_i2c, + void *data, unsigned long reg, int len) +{ + writesb(zx_i2c->reg_base + reg, data, len); +} + +static void zx2967_i2c_readsb(struct zx2967_i2c_info *zx_i2c, + void *data, unsigned long reg, int len) +{ + readsb(zx_i2c->reg_base + reg, data, len); +} + +static void zx2967_i2c_start_ctrl(struct zx2967_i2c_info *zx_i2c) +{ + u32 status; + u32 ctl; + + status = zx2967_i2c_readl(zx_i2c, REG_STAT); + status |= I2C_IRQ_ACK_CLEAR; + zx2967_i2c_writel(zx_i2c, status, REG_STAT); + + ctl = zx2967_i2c_readl(zx_i2c, REG_CMD); + if (zx_i2c->msg_rd) + ctl |= I2C_RW_READ; + else + ctl &= ~I2C_RW_READ; + ctl &= ~I2C_CMB_RW_EN; + ctl |= I2C_START; + zx2967_i2c_writel(zx_i2c, ctl, REG_CMD); +} + +static void zx2967_i2c_flush_fifos(struct zx2967_i2c_info *zx_i2c) +{ + u32 offset; + u32 val; + + if (zx_i2c->msg_rd) { + offset = REG_RDCONF; + val = I2C_RFIFO_RESET; + } else { + offset = REG_WRCONF; + val = I2C_WFIFO_RESET; + } + + val |= zx2967_i2c_readl(zx_i2c, offset); + zx2967_i2c_writel(zx_i2c, val, offset); +} + +static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c_info *zx_i2c, u32 size) +{ + u8 val[I2C_FIFO_MAX] = {0}; + int i; + + if (size > I2C_FIFO_MAX) { + dev_err(DEV(zx_i2c), "fifo size %d over the max value %d\n", + size, I2C_FIFO_MAX); + return -EINVAL; + } + + zx2967_i2c_readsb(zx_i2c, val, REG_DATA, size); + for (i = 0; i < size; i++) { + *zx_i2c->cur_trans++ = val[i]; + zx_i2c->residue--; + } + + barrier(); + + return 0; +} + +static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c_info *zx_i2c) +{ + size_t residue = zx_i2c->residue; + u8 *buf = zx_i2c->cur_trans; + + if (residue == 0) { + dev_err(DEV(zx_i2c), "residue is %d\n", (int)residue); + return -EINVAL; + } + + if (residue <= I2C_FIFO_MAX) { + zx2967_i2c_writesb(zx_i2c, buf, REG_DATA, residue); + + /* Again update before writing to FIFO to make sure isr sees. */ + zx_i2c->residue = 0; + zx_i2c->cur_trans = NULL; + } else { + zx2967_i2c_writesb(zx_i2c, buf, REG_DATA, I2C_FIFO_MAX); + zx_i2c->residue -= I2C_FIFO_MAX; + zx_i2c->cur_trans += I2C_FIFO_MAX; + } + + barrier(); + + return 0; +} + +static int zx2967_i2c_reset_hardware(struct zx2967_i2c_info *zx_i2c) +{ + u32 val; + u32 clk_div; + u32 status; + + val = I2C_MASTER | I2C_IRQ_MSK_ENABLE; + zx2967_i2c_writel(zx_i2c, val, REG_CMD); + + clk_div = clk_get_rate(zx_i2c->clk) / zx_i2c->clk_freq - 1; + zx2967_i2c_writel(zx_i2c, clk_div, REG_CLK_DIV_FS); + zx2967_i2c_writel(zx_i2c, clk_div, REG_CLK_DIV_HS); + + zx2967_i2c_writel(zx_i2c, I2C_FIFO_MAX - 1, REG_WRCONF); + zx2967_i2c_writel(zx_i2c, I2C_FIFO_MAX - 1, REG_RDCONF); + zx2967_i2c_writel(zx_i2c, 1, REG_RDCONF); + + zx2967_i2c_flush_fifos(zx_i2c); + + status = zx2967_i2c_readl(zx_i2c, REG_STAT); + if (status & I2C_SR_BUSY) + return -EBUSY; + if (status & (I2C_SR_EDEVICE | I2C_SR_EDATA)) + return -EIO; + + enable_irq(zx_i2c->irq); + + return 0; +} + +static void zx2967_i2c_isr_clr(struct zx2967_i2c_info *zx_i2c) +{ + u32 status; + + status = zx2967_i2c_readl(zx_i2c, REG_STAT); + status |= I2C_IRQ_ACK_CLEAR; + zx2967_i2c_writel(zx_i2c, status, REG_STAT); +} + +static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id) +{ + u32 status; + struct zx2967_i2c_info *zx_i2c = (struct zx2967_i2c_info *)dev_id; + unsigned long flags; + + spin_lock_irqsave(&zx_i2c->lock, flags); + + status = zx2967_i2c_readl(zx_i2c, REG_STAT) & I2C_INT_MASK; + zx2967_i2c_isr_clr(zx_i2c); + + if (status & I2C_ERROR_MASK) { + spin_unlock_irqrestore(&zx_i2c->lock, flags); + return IRQ_HANDLED; + } + + if (status & I2C_TRANS_DONE) + complete(&zx_i2c->complete); + + spin_unlock_irqrestore(&zx_i2c->lock, flags); + + return IRQ_HANDLED; +} + +static void zx2967_set_addr(struct zx2967_i2c_info *zx_i2c, u16 addr) +{ + u16 val; + + val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK; + zx2967_i2c_writel(zx_i2c, val, REG_DEVADDR_L); + + val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK; + zx2967_i2c_writel(zx_i2c, val, REG_DEVADDR_H); + if (val) + val = zx2967_i2c_readl(zx_i2c, REG_CMD) | I2C_ADDR_MODE_TEN; + else + val = zx2967_i2c_readl(zx_i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN; + zx2967_i2c_writel(zx_i2c, val, REG_CMD); +} + +static int +zx2967_i2c_xfer_read_bytes(struct zx2967_i2c_info *zx_i2c, u32 bytes) +{ + unsigned long time_left; + + reinit_completion(&zx_i2c->complete); + zx2967_i2c_writel(zx_i2c, bytes - 1, REG_RDCONF); + zx2967_i2c_start_ctrl(zx_i2c); + + time_left = wait_for_completion_timeout(&zx_i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) { + dev_err(DEV(zx_i2c), "read i2c transfer timed out\n"); + disable_irq(zx_i2c->irq); + zx2967_i2c_reset_hardware(zx_i2c); + return -EIO; + } + + return zx2967_i2c_empty_rx_fifo(zx_i2c, bytes); +} + +static int zx2967_i2c_xfer_read(struct zx2967_i2c_info *zx_i2c) +{ + int ret; + int i; + + for (i = 0; i < zx_i2c->access_cnt; i++) { + ret = zx2967_i2c_xfer_read_bytes(zx_i2c, I2C_FIFO_MAX); + if (ret) + return ret; + } + + if (zx_i2c->residue > 0) { + ret = zx2967_i2c_xfer_read_bytes(zx_i2c, zx_i2c->residue); + if (ret) + return ret; + } + + zx_i2c->residue = 0; + zx_i2c->access_cnt = 0; + return 0; +} + +static int +zx2967_i2c_xfer_write_bytes(struct zx2967_i2c_info *zx_i2c, u32 bytes) +{ + unsigned long time_left; + int ret; + + reinit_completion(&zx_i2c->complete); + + ret = zx2967_i2c_fill_tx_fifo(zx_i2c); + if (ret) + return ret; + + zx2967_i2c_start_ctrl(zx_i2c); + + time_left = wait_for_completion_timeout(&zx_i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) { + dev_err(DEV(zx_i2c), "write i2c transfer timed out\n"); + disable_irq(zx_i2c->irq); + zx2967_i2c_reset_hardware(zx_i2c); + return -EIO; + } + + return 0; +} + +static int zx2967_i2c_xfer_write(struct zx2967_i2c_info *zx_i2c) +{ + int ret; + int i; + + for (i = 0; i < zx_i2c->access_cnt; i++) { + ret = zx2967_i2c_xfer_write_bytes(zx_i2c, I2C_FIFO_MAX); + if (ret) + return ret; + } + + if (zx_i2c->residue > 0) { + ret = zx2967_i2c_xfer_write_bytes(zx_i2c, zx_i2c->residue); + if (ret) + return ret; + } + + zx_i2c->residue = 0; + zx_i2c->access_cnt = 0; + return 0; +} + +static int zx2967_i2c_xfer_msg(struct zx2967_i2c_info *zx_i2c, + struct i2c_msg *msg) +{ + if (msg->len == 0) + return -EINVAL; + + zx2967_i2c_flush_fifos(zx_i2c); + + zx_i2c->cur_trans = msg->buf; + zx_i2c->residue = msg->len; + zx_i2c->access_cnt = msg->len / I2C_FIFO_MAX; + zx_i2c->msg_rd = msg->flags & I2C_M_RD; + + if (zx_i2c->msg_rd) + return zx2967_i2c_xfer_read(zx_i2c); + + return zx2967_i2c_xfer_write(zx_i2c); +} + +static int zx2967_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct zx2967_i2c_info *zx_i2c = i2c_get_adapdata(adap); + int ret; + int i; + + if (zx_i2c->is_suspended) + return -EBUSY; + + zx2967_set_addr(zx_i2c, msgs->addr); + + for (i = 0; i < num; i++) { + ret = zx2967_i2c_xfer_msg(zx_i2c, &msgs[i]); + if (ret) + return ret; + } + + return num; +} + +static void +zx2967_smbus_xfer_prepare(struct zx2967_i2c_info *zx_i2c, u16 addr, + char read_write, u8 command, int size, + union i2c_smbus_data *data) +{ + u32 val; + + val = zx2967_i2c_readl(zx_i2c, REG_RDCONF); + val |= I2C_RFIFO_RESET; + zx2967_i2c_writel(zx_i2c, val, REG_RDCONF); + zx2967_set_addr(zx_i2c, addr); + val = zx2967_i2c_readl(zx_i2c, REG_CMD); + val &= ~I2C_RW_READ; + zx2967_i2c_writel(zx_i2c, val, REG_CMD); + + switch (size) { + case I2C_SMBUS_BYTE: + zx2967_i2c_writel(zx_i2c, command, REG_DATA); + break; + case I2C_SMBUS_BYTE_DATA: + zx2967_i2c_writel(zx_i2c, command, REG_DATA); + if (read_write == I2C_SMBUS_WRITE) + zx2967_i2c_writel(zx_i2c, data->byte, REG_DATA); + break; + case I2C_SMBUS_WORD_DATA: + zx2967_i2c_writel(zx_i2c, command, REG_DATA); + if (read_write == I2C_SMBUS_WRITE) { + zx2967_i2c_writel(zx_i2c, (data->word >> 8), REG_DATA); + zx2967_i2c_writel(zx_i2c, (data->word & 0xff), + REG_DATA); + } + break; + } +} + +static int zx2967_smbus_xfer_read(struct zx2967_i2c_info *zx_i2c, int size, + union i2c_smbus_data *data) +{ + unsigned long time_left; + u8 buf[2]; + u32 val; + + reinit_completion(&zx_i2c->complete); + + val = zx2967_i2c_readl(zx_i2c, REG_CMD); + val |= I2C_CMB_RW_EN; + zx2967_i2c_writel(zx_i2c, val, REG_CMD); + + val = zx2967_i2c_readl(zx_i2c, REG_CMD); + val |= I2C_START; + zx2967_i2c_writel(zx_i2c, val, REG_CMD); + + time_left = wait_for_completion_timeout(&zx_i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) { + dev_err(DEV(zx_i2c), "i2c read transfer timed out\n"); + disable_irq(zx_i2c->irq); + zx2967_i2c_reset_hardware(zx_i2c); + return -EIO; + } + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + val = zx2967_i2c_readl(zx_i2c, REG_DATA); + data->byte = val; + break; + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + buf[0] = zx2967_i2c_readl(zx_i2c, REG_DATA); + buf[1] = zx2967_i2c_readl(zx_i2c, REG_DATA); + data->word = (buf[0] << 8) | buf[1]; + break; + default: + dev_warn(DEV(zx_i2c), "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + return 0; +} + +static int zx2967_smbus_xfer_write(struct zx2967_i2c_info *zx_i2c) +{ + unsigned long time_left; + u32 val; + + reinit_completion(&zx_i2c->complete); + val = zx2967_i2c_readl(zx_i2c, REG_CMD); + val |= I2C_START; + zx2967_i2c_writel(zx_i2c, val, REG_CMD); + + time_left = wait_for_completion_timeout(&zx_i2c->complete, + I2C_TIMEOUT); + if (time_left == 0) { + dev_err(DEV(zx_i2c), "i2c write transfer timed out\n"); + disable_irq(zx_i2c->irq); + zx2967_i2c_reset_hardware(zx_i2c); + return -EIO; + } + + return 0; +} + +static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + struct zx2967_i2c_info *zx_i2c = i2c_get_adapdata(adap); + + if (size == I2C_SMBUS_QUICK) + read_write = I2C_SMBUS_WRITE; + + switch (size) { + case I2C_SMBUS_QUICK: + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + case I2C_SMBUS_WORD_DATA: + zx2967_smbus_xfer_prepare(zx_i2c, addr, read_write, + command, size, data); + break; + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -EOPNOTSUPP; + } + + if (read_write == I2C_SMBUS_READ) + return zx2967_smbus_xfer_read(zx_i2c, size, data); + + return zx2967_smbus_xfer_write(zx_i2c); +} + +#define ZX2967_I2C_FUNCS (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL | \ + I2C_FUNC_I2C | I2C_FUNC_SMBUS_I2C_BLOCK) + +static u32 zx2967_i2c_func(struct i2c_adapter *adap) +{ + return ZX2967_I2C_FUNCS; +} + +static int __maybe_unused zx2967_i2c_suspend(struct device *dev) +{ + struct zx2967_i2c_info *zx_i2c = dev_get_drvdata(dev); + + zx_i2c->is_suspended = true; + clk_disable_unprepare(zx_i2c->clk); + + return 0; +} + +static int __maybe_unused zx2967_i2c_resume(struct device *dev) +{ + struct zx2967_i2c_info *zx_i2c = dev_get_drvdata(dev); + + zx_i2c->is_suspended = false; + clk_prepare_enable(zx_i2c->clk); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops, + zx2967_i2c_suspend, zx2967_i2c_resume); + +static const struct i2c_algorithm zx2967_i2c_algo = { + .master_xfer = zx2967_i2c_xfer, + .smbus_xfer = zx2967_smbus_xfer, + .functionality = zx2967_i2c_func, +}; + +static const struct of_device_id zx2967_i2c_of_match[] = { + { .compatible = "zte,zx296718-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match); + +static int zx2967_i2c_probe(struct platform_device *pdev) +{ + struct zx2967_i2c_info *zx_i2c; + void __iomem *reg_base; + struct resource *res; + struct clk *clk; + int ret; + + zx_i2c = devm_kzalloc(&pdev->dev, sizeof(*zx_i2c), GFP_KERNEL); + if (!zx_i2c) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + reg_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "missing controller clock"); + return PTR_ERR(clk); + } + + ret = clk_prepare_enable(clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable i2c_clk\n"); + return ret; + } + + ret = device_property_read_u32(&pdev->dev, "clock-frequency", + &zx_i2c->clk_freq); + if (ret) { + dev_err(&pdev->dev, "missing clock-frequency"); + return ret; + } + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + return ret; + + zx_i2c->irq = ret; + zx_i2c->reg_base = reg_base; + zx_i2c->clk = clk; + + spin_lock_init(&zx_i2c->lock); + init_completion(&zx_i2c->complete); + platform_set_drvdata(pdev, zx_i2c); + + ret = zx2967_i2c_reset_hardware(zx_i2c); + if (ret) { + dev_err(&pdev->dev, "failed to initialize i2c controller\n"); + goto err_clk_unprepare; + } + + ret = devm_request_irq(&pdev->dev, zx_i2c->irq, + zx2967_i2c_isr, 0, dev_name(&pdev->dev), zx_i2c); + if (ret) { + dev_err(&pdev->dev, "failed to request irq %i\n", zx_i2c->irq); + goto err_clk_unprepare; + } + + i2c_set_adapdata(&zx_i2c->adap, zx_i2c); + strlcpy(zx_i2c->adap.name, "zx2967 i2c adapter", + sizeof(zx_i2c->adap.name)); + zx_i2c->adap.algo = &zx2967_i2c_algo; + zx_i2c->adap.nr = pdev->id; + zx_i2c->adap.dev.parent = &pdev->dev; + zx_i2c->adap.dev.of_node = pdev->dev.of_node; + + ret = i2c_add_numbered_adapter(&zx_i2c->adap); + if (ret) { + dev_err(&pdev->dev, "failed to add zx2967 i2c adapter\n"); + goto err_clk_unprepare; + } + + return 0; +err_clk_unprepare: + clk_disable_unprepare(zx_i2c->clk); + return ret; +} + +static int zx2967_i2c_remove(struct platform_device *pdev) +{ + struct zx2967_i2c_info *zx_i2c = platform_get_drvdata(pdev); + + i2c_del_adapter(&zx_i2c->adap); + clk_disable_unprepare(zx_i2c->clk); + + return 0; +} + +static struct platform_driver zx2967_i2c_driver = { + .probe = zx2967_i2c_probe, + .remove = zx2967_i2c_remove, + .driver = { + .name = "zx2967_i2c", + .of_match_table = zx2967_i2c_of_match, + .pm = &zx2967_i2c_dev_pm_ops, + }, +}; +module_platform_driver(zx2967_i2c_driver); + +MODULE_AUTHOR("Baoyou Xie "); +MODULE_DESCRIPTION("ZTE zx2967 I2C Bus Controller driver"); +MODULE_LICENSE("GPL v2");