From patchwork Thu Jun 25 00:27:36 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Drew Fustini X-Patchwork-Id: 206685 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-4.0 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS, URIBL_BLOCKED autolearn=no autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id A9EB9C433E0 for ; Thu, 25 Jun 2020 00:27:43 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 713B520706 for ; Thu, 25 Jun 2020 00:27:43 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=beagleboard-org.20150623.gappssmtp.com header.i=@beagleboard-org.20150623.gappssmtp.com header.b="N8Ct3mHy" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2387843AbgFYA1n (ORCPT ); Wed, 24 Jun 2020 20:27:43 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:58648 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2388297AbgFYA1m (ORCPT ); Wed, 24 Jun 2020 20:27:42 -0400 Received: from mail-wr1-x444.google.com (mail-wr1-x444.google.com [IPv6:2a00:1450:4864:20::444]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 0608AC061573 for ; Wed, 24 Jun 2020 17:27:40 -0700 (PDT) Received: by mail-wr1-x444.google.com with SMTP id j94so4067509wrj.0 for ; Wed, 24 Jun 2020 17:27:40 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=beagleboard-org.20150623.gappssmtp.com; s=20150623; h=date:from:to:cc:subject:message-id:mime-version:content-disposition; bh=twOEEo4sVMzJuj8SG+LhZx4U/3YAbsNh96QjyOpXoFc=; b=N8Ct3mHyZaOv2SbFUW5O4+RtAYUpm5f33PESPdvsYwkpUFXnBv6P9+ilmtc9+PD1RH iAOScnBHob24pLwN2kUXrwCcw2XezODi5Uev6Bm/037YsGVU0lGuI06vEz9JiG3nPIRb V4GeQgu8PpDUh8Ke4eVryiRfUyneVDm6GlG5YwwB9uFNigm1OCoHPcGahGwYiDuwjki8 XHyUW3UN5VsOJ23VRPvRcmUFdwZDlxgdl8ifP5g7Os0X7ScqtSlb4IrNTNe8raTB0lS4 W5NbZN1iOPXMgibJfjFp7UxOwiv7rJINDbnkm2BXYNulaS4829NaGS9acHiWFfFyX6ah y2zA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:mime-version :content-disposition; bh=twOEEo4sVMzJuj8SG+LhZx4U/3YAbsNh96QjyOpXoFc=; b=sDQQ2ZPIPlLeAhQiVhgx7SDs5lcAxnZpkBXfI3x23tnenwAMlO8KYSVtjQNyFwbEJ5 snSqPbGqfuxmc+r0Byjc7PLg5zoEz8TXpZKjorArSgPITCAA7gocRxBBqbN5uIYalLum 9IiPdVmsgYsWU4n0oizML/QPtK7oueC+m50E1CL7QIRmcsvDhHNtJ6IcSdqa/WgBgYX9 ZlE0Ia6yKjcuHWSDi/OAXQ03IQQGSqUmm8kCRK0xbXO9IMC69TBxOEtwS3IRUAGIUI5C Tm2Hi+gBGqkIrjaJL0JxphDCAKmmEx1VZaC0xWpXrXhwda7VCSZAMdkI5oNRMm7av3bG Ie+w== X-Gm-Message-State: AOAM530Ei8Lbht9ET2uR4IKMUoyvmyq3MfDSnX9SdP9/HBhYSIo2KvRJ grJgGglvtHIHTrsL9KFlMDCVzg== X-Google-Smtp-Source: ABdhPJzpFnn5JabAo7dVEOKs5pBdDMgmmfoc9e02L3NoomJjv8KOqOTBXZW82AswCXHWg65DTgHcIg== X-Received: by 2002:a5d:40d2:: with SMTP id b18mr33016186wrq.131.1593044859578; Wed, 24 Jun 2020 17:27:39 -0700 (PDT) Received: from x1 ([2001:16b8:5cfa:bd01:8fc:c978:d44b:800]) by smtp.gmail.com with ESMTPSA id f16sm2801079wmf.17.2020.06.24.17.27.38 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 24 Jun 2020 17:27:38 -0700 (PDT) Date: Thu, 25 Jun 2020 02:27:36 +0200 From: Drew Fustini To: Tony Lindgren , Linus Walleij Cc: linux-omap@vger.kernel.org, linux-gpio@vger.kernel.org, Jason Kridner , Robert Nelson Subject: gpio-omap: handle bias flag for gpio line Message-ID: <20200625002736.GA24954@x1> MIME-Version: 1.0 Content-Disposition: inline Sender: linux-gpio-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Tony and Linus - I'm hoping you could give me some feedback on this approach. My goal is to allow a userspace library (like libgpiod) to be able to set pull-up and pull-downs on the AM3358. I've changed gpio-omap.c so omap_gpio_set_config() will call omap_gpio_bias() when the parameter is one of the PIN_CONFIG_BIAS_xxx flags. That function will call gpiochip_generic_config() and the rest proceeds normally without further changes. However, this does require the following: 1) patch to fix return code in pcs_parse_pinconf() [0] 2) patch to add the gpio-ranges mappings [1] 2) change the compatible for the am33xx_pinmux node to "pinconf-single" 4) add "pinctrl-single,bias-pulldown" or "pinctrl-single,bias-pullup" property to a pin node. I found the binding documentation [2] for the bias properties to be very confusing as to how those 4 values work: > - pinctrl-single,bias-pullup : array of value that are used to configure the > input bias pullup in the pinmux register. > > /* input, enabled pullup bits, disabled pullup bits, mask */ > pinctrl-single,bias-pullup = <0 1 0 1>; > > - pinctrl-single,bias-pulldown : array of value that are used to configure the > input bias pulldown in the pinmux register. > /* input, enabled pulldown bits, disabled pulldown bits, mask */ > pinctrl-single,bias-pulldown = <2 2 0 2>; For AM3358, the pin conf register has the format [3]: bit attribute value 6 slew { 0: fast, 1: slow } 5 rx_active { 0: rx disable, 1: rx enabled } 4 pu_typesel { 0: pulldown select, 1: pullup select } 3 puden { 0: pud enable, 1: disabled } 2 mode 3 bits to selec mode 0 to 7 1 mode 0 mode I figured out the values for bias-pull{up,down} properties based on: 16 8 4 2 1 2^4 2^3 2^2 2^1 2^0 mask 1 1 0 0 0 24 pull-up 1 1 0 0 0 24 pull-dn 0 1 0 0 0 8 none 0 0 0 0 0 0 Thus the properties are: pinctrl-single,bias-pulldown = < 8 8 0 24>; pinctrl-single,bias-pullup = <24 24 0 24>; For an example, I added "pinctrl-single,bias-pulldown" to the node pinmux-ehrpwm1-pins in am335x-pocketbeagle.dts: ehrpwm1_pins: pinmux-ehrpwm1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ >; pinctrl-single,bias-pulldown = <8 8 0 24>; } AM335X_PIN_GPMC_A2 is PIN18 based on the memory offset and corresponds to gpiochip 1 line 18 (MUX_MODE1). Here is function graph trace (note: I used -fno-inline) when gpiomon runs with pull-down bias flag on gpiochip 1 line 18: debian@beaglebone:~$ ./libgpiod/tools/gpiomon -B pull-down 1 18 0) | gpio_ioctl() { 0) 2.708 us | gpiochip_get_desc(); 0) | gpiod_request() { 0) | gpiod_request_commit() { 0) 2.834 us | gpiochip_line_is_valid(); 0) | omap_gpio_request() { 0) 2.708 us | omap_enable_gpio_module(); 0) + 15.375 us | } 0) | gpiod_get_direction() { 0) 2.500 us | gpiod_to_chip(); 0) 3.459 us | omap_gpio_get_direction(); 0) + 16.125 us | } 0) + 52.875 us | } 0) + 60.750 us | } 0) | gpiod_direction_input() { 0) | omap_gpio_input() { 0) 2.500 us | omap_set_gpio_direction(); 0) 8.125 us | } 0) | gpio_set_bias() { 0) | gpio_set_config() { 0) | gpio_do_set_config() { 0) | omap_gpio_set_config() { 0) | omap_gpio_bias() { 0) | gpiochip_generic_config() { 0) | pinctrl_gpio_set_config() { 0) | pinctrl_get_device_gpio_range() { 0) 3.292 us | pinctrl_match_gpio_range(); 0) 8.667 us | } 0) | pinconf_set_config() { 0) | pcs_pinconf_set() { 0) 5.250 us | pcs_get_function(); 0) 3.417 us | pcs_readl(); 0) | pcs_pinconf_clear_bias() { 0) | pcs_pinconf_set() { 0) 3.125 us | pcs_get_function(); 0) 2.833 us | pcs_readl(); 0) 3.792 us | pcs_writel(); 0) + 20.958 us | } 0) | pcs_pinconf_set() { 0) 2.750 us | pcs_get_function(); 0) 8.083 us | } 0) + 37.333 us | } 0) 2.708 us | pcs_writel(); 0) + 65.916 us | } 0) + 71.375 us | } 0) + 89.083 us | } 0) + 95.292 us | } 0) ! 100.750 us | } 0) ! 106.667 us | } 0) ! 111.791 us | } 0) ! 117.167 us | } 0) ! 122.917 us | } 0) 2.750 us | desc_to_gpio(); 0) ! 146.459 us | } Thus, all it seems I can do is set a bias flag on a gpio line if the corresponding bias property is already set for that pin in dts. This does not accomplish anything. The ideal capability in my mind would be for pinctrl-single to understand that a pin defined by a "pinctrl-single,pins" property has both a configuration value and a mux mode value. The current pinconf support is based on "pinctrl-single,bias-pull{up,down}" which does not seem useful. I would appreciate any feedback. Thanks, Drew [0] https://lore.kernel.org/linux-omap/20200608125143.GA2789203@x1/ [1] https://lore.kernel.org/linux-omap/20200602131428.GA496390@x1/ [2] Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt [3] https://www.ti.com/lit/ug/spruh73q/spruh73q.pdf (see Figure 9-51) --- arch/arm/boot/dts/am335x-pocketbeagle.dts | 2 ++ arch/arm/boot/dts/am33xx-l4.dtsi | 2 +- drivers/gpio/Makefile | 2 +- drivers/gpio/gpio-omap.c | 37 ++++++++++++++++++++--- drivers/pinctrl/Makefile | 2 +- 5 files changed, 38 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/am335x-pocketbeagle.dts b/arch/arm/boot/dts/am335x-pocketbeagle.dts index 22d52516b7fc..f6de2028ba53 100644 --- a/arch/arm/boot/dts/am335x-pocketbeagle.dts +++ b/arch/arm/boot/dts/am335x-pocketbeagle.dts @@ -221,6 +221,8 @@ ehrpwm1_pins: pinmux-ehrpwm1-pins { pinctrl-single,pins = < AM33XX_PADCONF(AM335X_PIN_GPMC_A2, PIN_OUTPUT_PULLDOWN, MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */ >; + pinctrl-single,bias-pulldown = <8 8 0 24>; + /*pinctrl-single,bias-pullup = <24 24 0 24>;*/ }; mmc0_pins: pinmux-mmc0-pins { diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi index 903338015a68..cb8a57ed13c1 100644 --- a/arch/arm/boot/dts/am33xx-l4.dtsi +++ b/arch/arm/boot/dts/am33xx-l4.dtsi @@ -288,7 +288,7 @@ scm: scm@0 { ranges = <0 0 0x2000>; am33xx_pinmux: pinmux@800 { - compatible = "pinctrl-single"; + compatible = "pinconf-single"; reg = <0x800 0x238>; #pinctrl-cells = <2>; pinctrl-single,register-width = <32>; diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 1e4894e0bf0f..c55a5c167c43 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # generic gpio support: platform drivers, dedicated expander chips, etc -ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG +ccflags-$(CONFIG_DEBUG_GPIO) += -DDEBUG -fno-inline obj-$(CONFIG_GPIOLIB) += gpiolib.o obj-$(CONFIG_GPIOLIB) += gpiolib-devres.o diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index b8e2ecc3eade..972629d69917 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -871,6 +871,21 @@ static int omap_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask, return 0; } +/** + * omap_gpio_bias() - apply configuration for a pin + * @gc: the gpiochip owning the GPIO + * @offset: the offset of the GPIO to apply the configuration + * @config: the configuration to be applied + */ +static int omap_gpio_bias(struct gpio_chip *gc, unsigned offset, unsigned long config) +{ + int ret = 0; + + ret = gpiochip_generic_config(gc, offset, config); + return ret; +} + + static int omap_gpio_debounce(struct gpio_chip *chip, unsigned offset, unsigned debounce) { @@ -896,12 +911,26 @@ static int omap_gpio_set_config(struct gpio_chip *chip, unsigned offset, unsigned long config) { u32 debounce; + u32 config_arg; + int ret; - if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE) - return -ENOTSUPP; + if ((pinconf_to_config_param(config) == PIN_CONFIG_BIAS_DISABLE) || + (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_UP) || + (pinconf_to_config_param(config) == PIN_CONFIG_BIAS_PULL_DOWN)) + { + ret = omap_gpio_bias(chip, offset, config); + } + else if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE) + { + debounce = pinconf_to_config_argument(config); + ret = omap_gpio_debounce(chip, offset, debounce); + } + else + { + ret = -ENOTSUPP; + } - debounce = pinconf_to_config_argument(config); - return omap_gpio_debounce(chip, offset, debounce); + return ret; } static void omap_gpio_set(struct gpio_chip *chip, unsigned offset, int value) diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 1731b2154df9..fc62c20702c6 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 # generic pinmux support -subdir-ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG +subdir-ccflags-$(CONFIG_DEBUG_PINCTRL) += -DDEBUG -fno-inline obj-y += core.o pinctrl-utils.o obj-$(CONFIG_PINMUX) += pinmux.o