From patchwork Fri Feb 7 14:57:12 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Gaignard X-Patchwork-Id: 205048 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-9.8 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, DKIM_VALID_AU, HEADER_FROM_DIFFERENT_DOMAINS, INCLUDES_PATCH, MAILING_LIST_MULTI, SIGNED_OFF_BY,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED,USER_AGENT_GIT autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1F8F6C04EB5 for ; Fri, 7 Feb 2020 14:57:38 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id CFE72214AF for ; Fri, 7 Feb 2020 14:57:37 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=st.com header.i=@st.com header.b="dH25dPAL" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727032AbgBGO5h (ORCPT ); Fri, 7 Feb 2020 09:57:37 -0500 Received: from mx07-00178001.pphosted.com ([62.209.51.94]:35966 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726674AbgBGO5h (ORCPT ); Fri, 7 Feb 2020 09:57:37 -0500 Received: from pps.filterd (m0046668.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.16.0.42/8.16.0.42) with SMTP id 017ErJsp027791; Fri, 7 Feb 2020 15:57:18 +0100 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=st.com; h=from : to : cc : subject : date : message-id : mime-version : content-type; s=STMicroelectronics; bh=tQyKm+p4y5ZUxU3qaGDIleA3Xn4xfR3vAme4eLHvqwY=; b=dH25dPALZjJ0yQn74K+prbL7FnovfFMbeL9cgacR/+Car7usaBG6d/7NnlBmPAz6fCjr rEnkkzdGPX6AcH4mJe08jzSS8h7ALgCrdi3ImlsDRlQ2EUgSadQ+35birWjXYBGUjfsG PPT2pO+aeXIjQKY/Oi4aomkUB+sXUf3MnNmhHbp3fuIPKT5yGLzBhRibhmJuiiyeSWHH NwgyFvzyUFQsWZ4xh0HKrUgPfT2+NICyd307Ohi1iIgN24g6FKi/7vZivo9F/ERKFq8B /8WIEthvUH0AlA6q8Zs4wQJF9sj2OQJwL6FeQ40dPAJvQLeeT7PIzoJTNsRuj85MVO3X QQ== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com with ESMTP id 2xyhkuc12p-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 07 Feb 2020 15:57:18 +0100 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 44A09100034; Fri, 7 Feb 2020 15:57:16 +0100 (CET) Received: from Webmail-eu.st.com (sfhdag3node3.st.com [10.75.127.9]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 1987F2C7E2F; Fri, 7 Feb 2020 15:57:16 +0100 (CET) Received: from localhost (10.75.127.46) by SFHDAG3NODE3.st.com (10.75.127.9) with Microsoft SMTP Server (TLS) id 15.0.1347.2; Fri, 7 Feb 2020 15:57:15 +0100 From: Benjamin Gaignard To: , , , , , CC: , , , , , Benjamin Gaignard Subject: [PATCH v2] dt-bindings: mfd: Convert stmfx bindings to json-schema Date: Fri, 7 Feb 2020 15:57:12 +0100 Message-ID: <20200207145712.24898-1-benjamin.gaignard@st.com> X-Mailer: git-send-email 2.15.0 MIME-Version: 1.0 X-Originating-IP: [10.75.127.46] X-ClientProxiedBy: SFHDAG1NODE3.st.com (10.75.127.3) To SFHDAG3NODE3.st.com (10.75.127.9) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10434:6.0.138, 18.0.572 definitions=2020-02-07_01:2020-02-07,2020-02-07 signatures=0 Sender: devicetree-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Convert stmfx bindings to json-schema Signed-off-by: Benjamin Gaignard --- version 2: - fix description indentation - change pin controller node name to pinctrl - document pinctrl subnode properties - add pinctrl subnode example Documentation/devicetree/bindings/mfd/stmfx.txt | 28 ----- Documentation/devicetree/bindings/mfd/stmfx.yaml | 120 +++++++++++++++++++++ .../devicetree/bindings/pinctrl/pinctrl-stmfx.txt | 116 -------------------- 3 files changed, 120 insertions(+), 144 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/stmfx.txt create mode 100644 Documentation/devicetree/bindings/mfd/stmfx.yaml delete mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt diff --git a/Documentation/devicetree/bindings/mfd/stmfx.txt b/Documentation/devicetree/bindings/mfd/stmfx.txt deleted file mode 100644 index f0c2f7fcf5c7..000000000000 --- a/Documentation/devicetree/bindings/mfd/stmfx.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectonics Multi-Function eXpander (STMFX) Core bindings - -ST Multi-Function eXpander (STMFX) is a slave controller using I2C for -communication with the main MCU. Its main features are GPIO expansion, main -MCU IDD measurement (IDD is the amount of current that flows through VDD) and -resistive touchscreen controller. - -Required properties: -- compatible: should be "st,stmfx-0300". -- reg: I2C slave address of the device. -- interrupts: interrupt specifier triggered by MFX_IRQ_OUT signal. - Please refer to ../interrupt-controller/interrupt.txt - -Optional properties: -- drive-open-drain: configure MFX_IRQ_OUT as open drain. -- vdd-supply: phandle of the regulator supplying STMFX. - -Example: - - stmfx: stmfx@42 { - compatible = "st,stmfx-0300"; - reg = <0x42>; - interrupts = <8 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpioi>; - vdd-supply = <&v3v3>; - }; - -Please refer to ../pinctrl/pinctrl-stmfx.txt for STMFX GPIO expander function bindings. diff --git a/Documentation/devicetree/bindings/mfd/stmfx.yaml b/Documentation/devicetree/bindings/mfd/stmfx.yaml new file mode 100644 index 000000000000..1af906fb876f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/stmfx.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/stmfx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Multi-Function eXpander (STMFX) bindings + +description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for + communication with the main MCU. Its main features are GPIO expansion, + main MCU IDD measurement (IDD is the amount of current that flows + through VDD) and resistive touchscreen controller. + +maintainers: + - Amelie Delaunay + +properties: + compatible: + const: st,stmfx-0300 + + reg: + enum: [ 0x42, 0x43 ] + + interrupts: + maxItems: 1 + + drive-open-drain: true + + vdd-supply: + maxItems: 1 + + pinctrl: + type: object + + $ref: ../pinctrl/pincfg-node.yaml + + properties: + compatible: + const: st,stmfx-0300-pinctrl + + "#gpio-cells": + const: 2 + + "#interrupt-cells": + const: 2 + + gpio-controller: true + + interrupt-controller: true + + gpio-ranges: + description: if all STMFX pins[24:0] are available (no other STMFX function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; + if agpio[3:0] are not available (STMFX Touchscreen function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; + if agpio[7:4] are not available (STMFX IDD function in use), + you should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; + maxItems: 1 + + patternProperties: + "^[a-zA-Z][a-zA-Z0-9_]+$": + type: object + $ref: ../pinctrl/pinmux-node.yaml + + properties: + pins: true + bias-disable: true + bias-pull-up: true + bias-pull-pin-default: true + bias-pull-down: true + drive-open-drain: true + drive-push-pull: true + output-high: true + output-low: true + + required: + - compatible + - "#gpio-cells" + - "#interrupt-cells" + - gpio-controller + - interrupt-controller + - gpio-ranges + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + stmfx@42 { + compatible = "st,stmfx-0300"; + reg = <0x42>; + interrupts = <8 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpioi>; + vdd-supply = <&v3v3>; + + stmfx_pinctrl: pinctrl { + compatible = "st,stmfx-0300-pinctrl"; + #gpio-cells = <2>; + #interrupt-cells = <2>; + gpio-controller; + interrupt-controller; + gpio-ranges = <&stmfx_pinctrl 0 0 24>; + + joystick_pins: joystick { + pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; + drive-push-pull; + bias-pull-up; + }; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt deleted file mode 100644 index c1b4c1819b84..000000000000 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-stmfx.txt +++ /dev/null @@ -1,116 +0,0 @@ -STMicroelectronics Multi-Function eXpander (STMFX) GPIO expander bindings - -ST Multi-Function eXpander (STMFX) offers up to 24 GPIOs expansion. -Please refer to ../mfd/stmfx.txt for STMFX Core bindings. - -Required properties: -- compatible: should be "st,stmfx-0300-pinctrl". -- #gpio-cells: should be <2>, the first cell is the GPIO number and the second - cell is the gpio flags in accordance with . -- gpio-controller: marks the device as a GPIO controller. -- #interrupt-cells: should be <2>, the first cell is the GPIO number and the - second cell is the interrupt flags in accordance with - . -- interrupt-controller: marks the device as an interrupt controller. -- gpio-ranges: specifies the mapping between gpio controller and pin - controller pins. Check "Concerning gpio-ranges property" below. -Please refer to ../gpio/gpio.txt. - -Please refer to pinctrl-bindings.txt for pin configuration. - -Required properties for pin configuration sub-nodes: -- pins: list of pins to which the configuration applies. - -Optional properties for pin configuration sub-nodes (pinconf-generic ones): -- bias-disable: disable any bias on the pin. -- bias-pull-up: the pin will be pulled up. -- bias-pull-pin-default: use the pin-default pull state. -- bias-pull-down: the pin will be pulled down. -- drive-open-drain: the pin will be driven with open drain. -- drive-push-pull: the pin will be driven actively high and low. -- output-high: the pin will be configured as an output driving high level. -- output-low: the pin will be configured as an output driving low level. - -Note that STMFX pins[15:0] are called "gpio[15:0]", and STMFX pins[23:16] are -called "agpio[7:0]". Example, to refer to pin 18 of STMFX, use "agpio2". - -Concerning gpio-ranges property: -- if all STMFX pins[24:0] are available (no other STMFX function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 24>; -- if agpio[3:0] are not available (STMFX Touchscreen function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 16>, <&stmfx_pinctrl 20 20 4>; -- if agpio[7:4] are not available (STMFX IDD function in use), you - should use gpio-ranges = <&stmfx_pinctrl 0 0 20>; - - -Example: - - stmfx: stmfx@42 { - ... - - stmfx_pinctrl: stmfx-pin-controller { - compatible = "st,stmfx-0300-pinctrl"; - #gpio-cells = <2>; - #interrupt-cells = <2>; - gpio-controller; - interrupt-controller; - gpio-ranges = <&stmfx_pinctrl 0 0 24>; - - joystick_pins: joystick { - pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4"; - drive-push-pull; - bias-pull-up; - }; - }; - }; - -Example of STMFX GPIO consumers: - - joystick { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&joystick_pins>; - pinctrl-names = "default"; - button-0 { - label = "JoySel"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; - }; - button-1 { - label = "JoyDown"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <1 IRQ_TYPE_EDGE_RISING>; - }; - button-2 { - label = "JoyLeft"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <2 IRQ_TYPE_EDGE_RISING>; - }; - button-3 { - label = "JoyRight"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <3 IRQ_TYPE_EDGE_RISING>; - }; - button-4 { - label = "JoyUp"; - linux,code = ; - interrupt-parent = <&stmfx_pinctrl>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - }; - }; - - leds { - compatible = "gpio-leds"; - orange { - gpios = <&stmfx_pinctrl 17 1>; - }; - - blue { - gpios = <&stmfx_pinctrl 19 1>; - }; - }