From patchwork Mon Jan 13 14:58:01 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrea della Porta X-Patchwork-Id: 857057 Received: from mail-wm1-f68.google.com (mail-wm1-f68.google.com [209.85.128.68]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E6ACA22F15D for ; Mon, 13 Jan 2025 14:57:26 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.128.68 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780250; cv=none; b=RG28qPxtFN9gFO9aTOr+D7hOCMhsngK8mYbljwmz6FsvKtYYEk/dmqHxKuzSDGawAgPpo0WTHDkjE65ioukVdUMGIOMlsxp34LQs/OQL5n0SVK+4nwOP3FHMeIGFCqIYynDPIvCAqOd5lQovLDpjdeaMbsBLslNe3jxOS69pDnE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780250; c=relaxed/simple; bh=ZzqePNM35l3Z8Gz1nVIYnnJiNYLjeKPmuCcKhluGTtw=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=BkEMpfSXDoOM1urIr0G+OCQTwueOCFxVyTQGWt6t70EHvw0gtHQMvJtZle9zjut55nPTgzoFbx/4kgb6OGIU0VPf6WR17bdtnLrKHMkqKU2vsD6clY37FXqbG5ber7VJ3Ql6lWPPbhoBwNlfXPiBWRQEmRdFc0xLhZKKpbJOkcg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com; spf=pass smtp.mailfrom=suse.com; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b=Orohq1qE; arc=none smtp.client-ip=209.85.128.68 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=suse.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b="Orohq1qE" Received: by mail-wm1-f68.google.com with SMTP id 5b1f17b1804b1-4363ae65100so45960125e9.0 for ; Mon, 13 Jan 2025 06:57:26 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.com; s=google; t=1736780245; x=1737385045; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=C68JgH8Gqt6ZfeqA1bXyDpC6GL3SvnH7A0xfE1bAhxU=; b=Orohq1qESgtJtZZ0HbuZ0rFAQmfIPtQXO5lTfwO275gYSAvtRuHzYQdzd5K16QbCsm hj7r305WqrLxY2dsBggV0IcEGiu9rpCQI4CjgQ40ucxJbNH0UXVpSZAXkQWNrPtUqtIv Re0Q8wCaTFMYLic+B9vNa0fpmaQlQ3V0sXIn6LqjTTs7tNO8PuSX/61u47x/KCwlQUjB jf8Y7+qgTAr4o0DTluKxqxjBd5/2pdLT7BdEEfHTepW7hJdit2jD/cM0IVz7hcbwN4FV B/xzzvNJXpFYRXX0MdkupPF/dTFwknsF38ByPW64ULtyfbMoW/chXs9yjQGoFxrKk1AI FspA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1736780245; x=1737385045; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=C68JgH8Gqt6ZfeqA1bXyDpC6GL3SvnH7A0xfE1bAhxU=; b=fbuINRTSRjqnk2VMrop/+obLGWeFuwznad3LxUIzkJG1Tj4qL/lPhMdpcrVLExJToJ xPDDBc9ZUB7hXzAGGjjgKM9wBKPT2JOBgySD+1F2dZJSNfd85HbmAkKpvLiGBSZDNlqt XqNCyhhitxetbqzzFZwS219lS5WkmaE/kaH1fEazN1Tk5Mcj3FElq2ieSZ7ZDUb3JH8t 74gjJQii8cnepxOrVb3dcU6pRYeKExUa0cYry1SBsqhO4VqbmVqPKYGll8auLgzOvRpD gmRmbEL3+mX2mE3dFf3GynWX+GzPu2EvdruW6LMCRwyfxwuIHj/ff0qTDovfwN7Mwkro ZiGw== X-Forwarded-Encrypted: i=1; AJvYcCXAoiSOOxIzLAE+2BLd6nOCurzQtNI1HLEJw29zX3ZmhLbMUocdQJJpCmzolEKYTSLbfcZEKweX7UGN@vger.kernel.org X-Gm-Message-State: AOJu0YzBE2zUOUzmhHTcGPxRiHaIJ9ni94uqnZCP0gZAgAw6ib1iNYFh BuqP1xZle/4ztnkH499D/vgvflfvSE7dZIT1d/Zs8S/ZnQWnN/GxLTznRP+bMEc= X-Gm-Gg: ASbGncsVn9n4DQwF0afjm+ap4yRYOsmhv8srW5/vuoal7zUQ4nxOySjsmuKQ5vPcZ3v bCwKBMjgwVwMHwLahTxHjbjnkLoIy5LFHQ9q+PGI/ty7vdhZzx4A3asrJgNx99VM1OWKRypLOu+ WHI11a9/fGYwhi7MzhGqPHJMcU+xFBXeuw7RmN0jCyxe+YSk+oaKDFwhM0Vc7A47NjD/CKaTvsT KdpAy2F910MfahKexhzDp2jMEdBE2QjOPXtLx5draj5mas/9Eqb6ic0xAGnKWXqUyQ9NUVeaNdB 30DSe4bpc7dMtaKZaE+rg3FDjXI= X-Google-Smtp-Source: AGHT+IFWLewzDHrBRQI/66FubkXkZlYm5ex3VbjkOtN/m0imbBSlQzwg+R1xGntGGdxVejgggXfc1A== X-Received: by 2002:a05:6000:1ac9:b0:38b:d8a5:df43 with SMTP id ffacd0b85a97d-38bd8a5e014mr5995357f8f.21.1736780245111; Mon, 13 Jan 2025 06:57:25 -0800 (PST) Received: from localhost (host-87-14-236-197.retail.telecomitalia.it. [87.14.236.197]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-ab2c90e8888sm509823066b.80.2025.01.13.06.57.24 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Jan 2025 06:57:24 -0800 (PST) From: Andrea della Porta To: Andrea della Porta , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Florian Fainelli , Broadcom internal kernel review list , Lorenzo Pieralisi , Krzysztof Wilczynski , Manivannan Sadhasivam , Bjorn Helgaas , Linus Walleij , Catalin Marinas , Will Deacon , Bartosz Golaszewski , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Saravana Kannan , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, linux-gpio@vger.kernel.org, Masahiro Yamada , Stefan Wahren , Herve Codina , Luca Ceresoli , Thomas Petazzoni , Andrew Lunn Cc: Krzysztof Kozlowski Subject: [PATCH v6 02/10] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings Date: Mon, 13 Jan 2025 15:58:01 +0100 Message-ID: <585d04509edca5c8b786fee9383471e0b3ea35a3.1736776658.git.andrea.porta@suse.com> X-Mailer: git-send-email 2.44.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add device tree bindings for the gpio/pin/mux controller that is part of the RP1 multi function device, and relative entries in MAINTAINERS file. Signed-off-by: Andrea della Porta Reviewed-by: Krzysztof Kozlowski Reviewed-by: Linus Walleij --- .../pinctrl/raspberrypi,rp1-gpio.yaml | 198 ++++++++++++++++++ MAINTAINERS | 2 + 2 files changed, 200 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml new file mode 100644 index 000000000000..9528f8675b3b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml @@ -0,0 +1,198 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule + +maintainers: + - Andrea della Porta + +description: + The RP1 chipset is a Multi Function Device containing, among other + sub-peripherals, a gpio/pinconf/mux controller whose 54 pins are grouped + into 3 banks. + It works also as an interrupt controller for those gpios. + +properties: + compatible: + const: raspberrypi,rp1-gpio + + reg: + maxItems: 3 + description: One reg specifier for each one of the 3 pin banks. + + '#gpio-cells': + description: The first cell is the pin number and the second cell is used + to specify the flags (see include/dt-bindings/gpio/gpio.h). + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + gpio-line-names: + maxItems: 54 + + interrupts: + maxItems: 3 + description: One interrupt specifier for each one of the 3 pin banks. + + '#interrupt-cells': + description: + Specifies the Bank number [0, 1, 2] and Flags as defined in + include/dt-bindings/interrupt-controller/irq.h. + const: 2 + + interrupt-controller: true + +patternProperties: + '-state$': + oneOf: + - $ref: '#/$defs/raspberrypi-rp1-state' + - patternProperties: + '-pins$': + $ref: '#/$defs/raspberrypi-rp1-state' + additionalProperties: false + +$defs: + raspberrypi-rp1-state: + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: '^gpio([0-9]|[1-4][0-9]|5[0-3])$' + + function: + enum: [ alt0, alt1, alt2, alt3, alt4, gpio, alt6, alt7, alt8, none, + aaud, dcd0, dpi, dsi0_te_ext, dsi1_te_ext, dsr0, dtr0, gpclk0, + gpclk1, gpclk2, gpclk3, gpclk4, gpclk5, i2c0, i2c1, i2c2, i2c3, + i2c4, i2c5, i2c6, i2s0, i2s1, i2s2, ir, mic, pcie_clkreq_n, + pio, proc_rio, pwm0, pwm1, ri0, sd0, sd1, spi0, spi1, spi2, + spi3, spi4, spi5, spi6, spi7, spi8, uart0, uart1, uart2, uart3, + uart4, uart5, vbus0, vbus1, vbus2, vbus3 ] + + description: + Specify the alternative function to be configured for the specified + pins. + + bias-disable: true + bias-pull-down: true + bias-pull-up: true + input-enable: true + input-schmitt-enable: true + output-enable: true + output-high: true + output-low: true + slew-rate: + description: 0 is slow slew rate, 1 is fast slew rate + enum: [ 0, 1 ] + drive-strength: + enum: [ 2, 4, 8, 12 ] + + additionalProperties: false + +allOf: + - $ref: pinctrl.yaml# + +required: + - reg + - compatible + - '#gpio-cells' + - gpio-controller + - interrupts + - '#interrupt-cells' + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include + + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + rp1_gpio: pinctrl@c0400d0000 { + reg = <0xc0 0x400d0000 0x0 0xc000>, + <0xc0 0x400e0000 0x0 0xc000>, + <0xc0 0x400f0000 0x0 0xc000>; + compatible = "raspberrypi,rp1-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>; + gpio-line-names = + "ID_SDA", // GPIO0 + "ID_SCL", // GPIO1 + "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", + "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16", + "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21", + "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26", + "GPIO27", + "PCIE_RP1_WAKE", // GPIO28 + "FAN_TACH", // GPIO29 + "HOST_SDA", // GPIO30 + "HOST_SCL", // GPIO31 + "ETH_RST_N", // GPIO32 + "", // GPIO33 + "CD0_IO0_MICCLK", // GPIO34 + "CD0_IO0_MICDAT0", // GPIO35 + "RP1_PCIE_CLKREQ_N", // GPIO36 + "", // GPIO37 + "CD0_SDA", // GPIO38 + "CD0_SCL", // GPIO39 + "CD1_SDA", // GPIO40 + "CD1_SCL", // GPIO41 + "USB_VBUS_EN", // GPIO42 + "USB_OC_N", // GPIO43 + "RP1_STAT_LED", // GPIO44 + "FAN_PWM", // GPIO45 + "CD1_IO0_MICCLK", // GPIO46 + "2712_WAKE", // GPIO47 + "CD1_IO1_MICDAT1", // GPIO48 + "EN_MAX_USB_CUR", // GPIO49 + "", // GPIO50 + "", // GPIO51 + "", // GPIO52 + ""; // GPIO53 + + rp1-i2s0-default-state { + function = "i2s0"; + pins = "gpio18", "gpio19", "gpio20", "gpio21"; + bias-disable; + }; + + rp1-uart0-default-state { + txd-pins { + function = "uart0"; + pins = "gpio14"; + bias-disable; + }; + + rxd-pins { + function = "uart0"; + pins = "gpio15"; + bias-pull-up; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 8ced4ed32c00..a547e863807c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19578,7 +19578,9 @@ RASPBERRY PI RP1 PCI DRIVER M: Andrea della Porta S: Maintained F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml +F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml F: include/dt-bindings/clock/rp1.h +F: include/dt-bindings/misc/rp1.h RC-CORE / LIRC FRAMEWORK M: Sean Young From patchwork Mon Jan 13 14:58:03 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrea della Porta X-Patchwork-Id: 857056 Received: from mail-ej1-f67.google.com (mail-ej1-f67.google.com [209.85.218.67]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C0AD922F835 for ; Mon, 13 Jan 2025 14:57:28 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.67 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780252; cv=none; b=tgk/JEs2lY9wX9Mssz5l+rli6YLkvaROBe8w4HkVyYXOCWGuG4ph/3LqqS05V6LKhjxyBVQGet4oGdFYP8s4m71JpFEkIevjHdw9rFXPCV5OD3yb5vjvslDaZjaZ7vE6i62Iv/xgGBcu/Ko5kS10ogiLq25RMwh/6bpfod45lNk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780252; c=relaxed/simple; bh=ALUusHixIh+6t2TqYn6+YhebtqgJ/QM68HSsU3QM9Vk=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=etrw54WUotNXVqeel/adWotHwZrBi/Wi9IriM3CxIiBJkzebNgXorNiEqf+mkJfgF5cB+8i7vppcaVGrc4Bm87ctpjeQK7Cj+aVDYp0bGQyMtP/0y0vt4XMIC28e72tK0I24iYwX9FgjaAbOZ7iFdnBPlQ+piMTI0iNEG8ZSeF8= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com; spf=pass smtp.mailfrom=suse.com; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b=P+ZnVWWk; arc=none smtp.client-ip=209.85.218.67 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=suse.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b="P+ZnVWWk" Received: by mail-ej1-f67.google.com with SMTP id a640c23a62f3a-ab2c9b8aecaso596149066b.0 for ; Mon, 13 Jan 2025 06:57:28 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.com; s=google; t=1736780247; x=1737385047; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=MpVNvS0mWns4dmdghCPgwZp6P+vFcnqkJJZ/qXumsoE=; b=P+ZnVWWkXnJchYA0SvI6TpeW7IqfMPIP7cAHmXpSAGeaLUMRYS8lHorb43YYqPUOdM TT++0W6jNpmQTsAMWgssk7kww9UiwRuxewN5F+H2LCc+I9bhIQ9PL6xOVXIvF00DV5Yp z6n9oJNL6sT1JIC7Utb+yt0elzW3NDS7C7X+DvevJPRMnWjG2JtPN4RRL01bv1jxRfRR 0aVB5uhHhp2XiDI6gn3yamZNUxCbkPInsnxJMOMSKsTuKScb6bwffbf6QYiIr07xcxJg XzYIzPFbn8hEoKnnjBl/buBbws+p75d412s1hONvlW31NpEJjYOs5IcJshjYHcR8hRr4 dHSA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1736780247; x=1737385047; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=MpVNvS0mWns4dmdghCPgwZp6P+vFcnqkJJZ/qXumsoE=; b=tiA3S2nTeLAXBzdghpcnBjmuTDrPl0x1d0f9tQ6bmTB+nB60VPe2uIs5Y0jIh1A57w Kc8KtyoYdVP+5OoRTBBC3ikZaD5lC57rrKmufX4UWZSrlLfwTfbuT92l8uMU8Yu4v8Jr JEEXVtdmHRJIiuaA0ztbf4OwJQG/HNFePeNy9FJBGx6S3v/g+tlUFN8hVTh48li6s9ie QrN6BmAEq9MGSodK08kCYmZDaO8qxrBrZMOjI+D8KFPHh6r7cdY6ZTwcqxJnVCr5B9Tr 7I81n3dojsgGqZNY4wKjQM0cFn9bV09j1yFzmEW+ALGGOfZlsQI73BoSAEwL9+1WNIg/ zaeg== X-Forwarded-Encrypted: i=1; AJvYcCU6/Vi1q/LzFPQVfvSdd8OD73Fkql/bIZuk1oIXdSIZDo1PNBlFNNGzs5ad8xQJ0x2040y8RiOFESYe@vger.kernel.org X-Gm-Message-State: AOJu0YxSyxG7igBkN2r7by2PatCpe0XLnL/z/bgqs7tJM2NnM7OyrFJx rXk/RfB86PCYF6AA1yjhv4/BfI+H0gSJfVgRWOwhuDbKz2N/2YY+nqNXIbLurNg= X-Gm-Gg: ASbGncux7jOp/Bt/YxWkOL9rKIO+pxorxtowRu3fyx6DZ9xDzmkHjKNGk/l693u9htB F4CQbHSJBMaIstlrDerrrcHriv3OsDkFGuQqrqlM9IaSK7gJZI9rcaV2r0QZPPkHl36QvdumoSN uR/7KCTVdsvv6eRU0MtER8ybllQtTGxbC2ub8BXzbAeRXu4/7NTIP1VbE4AHohYb7FGTVzvQ39I er8h0jbCQNRwX/Pq75BBlqxAGa7fk4tQAf8k6kv0lrD5e/SaxTy+Ret+oQv7CZaihYMV15orZK9 1+0mCpvSpRuDN8WMxS/WH2w7WaU= X-Google-Smtp-Source: AGHT+IEV3Z8XO81JL30T5HSM10iuFAo+SAF8yUhouvdLGjnlVbS73zWwGY/9ygJKvEqqZt+dO6jvIQ== X-Received: by 2002:a17:907:d9e:b0:aae:c3c1:1361 with SMTP id a640c23a62f3a-ab2ab6bfe9amr2116824666b.44.1736780247027; Mon, 13 Jan 2025 06:57:27 -0800 (PST) Received: from localhost (host-87-14-236-197.retail.telecomitalia.it. [87.14.236.197]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-ab2c95b1ccasm509989866b.158.2025.01.13.06.57.26 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Jan 2025 06:57:26 -0800 (PST) From: Andrea della Porta To: Andrea della Porta , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Florian Fainelli , Broadcom internal kernel review list , Lorenzo Pieralisi , Krzysztof Wilczynski , Manivannan Sadhasivam , Bjorn Helgaas , Linus Walleij , Catalin Marinas , Will Deacon , Bartosz Golaszewski , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Saravana Kannan , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, linux-gpio@vger.kernel.org, Masahiro Yamada , Stefan Wahren , Herve Codina , Luca Ceresoli , Thomas Petazzoni , Andrew Lunn Subject: [PATCH v6 04/10] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1 Date: Mon, 13 Jan 2025 15:58:03 +0100 Message-ID: X-Mailer: git-send-email 2.44.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The RP1 is a MFD that exposes its peripherals through PCI BARs. This schema is intended as minimal support for the clock generator and gpio controller peripherals which are accessible through BAR1. Signed-off-by: Andrea della Porta Reviewed-by: Rob Herring (Arm) --- .../devicetree/bindings/misc/pci1de4,1.yaml | 135 ++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 136 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/pci1de4,1.yaml diff --git a/Documentation/devicetree/bindings/misc/pci1de4,1.yaml b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml new file mode 100644 index 000000000000..034c7077b27d --- /dev/null +++ b/Documentation/devicetree/bindings/misc/pci1de4,1.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/pci1de4,1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 MFD PCI device + +maintainers: + - Andrea della Porta + +description: + The RaspberryPi RP1 is a PCI multi function device containing + peripherals ranging from Ethernet to USB controller, I2C, SPI + and others. + The peripherals are accessed by addressing the PCI BAR1 region. + +allOf: + - $ref: /schemas/pci/pci-ep-bus.yaml + +properties: + compatible: + additionalItems: true + maxItems: 3 + items: + - const: pci1de4,1 + + '#interrupt-cells': + const: 2 + description: | + Specifies respectively the interrupt number and flags as defined + in include/dt-bindings/interrupt-controller/irq.h. + The supported values for the interrupt number are: + - IO BANK0: 0 + - IO BANK1: 1 + - IO BANK2: 2 + - AUDIO IN: 3 + - AUDIO OUT: 4 + - PWM0: 5 + - ETH: 6 + - I2C0: 7 + - I2C1: 8 + - I2C2: 9 + - I2C3: 10 + - I2C4: 11 + - I2C5: 12 + - I2C6: 13 + - I2S0: 14 + - I2S1: 15 + - I2S2: 16 + - SDIO0: 17 + - SDIO1: 18 + - SPI0: 19 + - SPI1: 20 + - SPI2: 21 + - SPI3: 22 + - SPI4: 23 + - SPI5: 24 + - UART0: 25 + - TIMER0: 26 + - TIMER1: 27 + - TIMER2: 28 + - TIMER3: 29 + - USB HOST0: 30 + - USB HOST0-0: 31 + - USB HOST0-1: 32 + - USB HOST0-2: 33 + - USB HOST0-3: 34 + - USB HOST1: 35 + - USB HOST1-0: 36 + - USB HOST1-1: 37 + - USB HOST1-2: 38 + - USB HOST1-3: 39 + - DMA: 40 + - PWM1: 41 + - UART1: 42 + - UART2: 43 + - UART3: 44 + - UART4: 45 + - UART5: 46 + - MIPI0: 47 + - MIPI1: 48 + - VIDEO OUT: 49 + - PIO0: 50 + - PIO1: 51 + - ADC FIFO: 52 + - PCIE OUT: 53 + - SPI6: 54 + - SPI7: 55 + - SPI8: 56 + - PROC MISC: 57 + - SYSCFG: 58 + - CLOCKS DEFAULT: 59 + - VBUSCTRL: 60 + + interrupt-controller: true + +unevaluatedProperties: false + +required: + - compatible + - '#interrupt-cells' + - interrupt-controller + - pci-ep-bus@1 + +examples: + - | + pci { + #address-cells = <3>; + #size-cells = <2>; + + rp1@0,0 { + compatible = "pci1de4,1"; + ranges = <0x01 0x00 0x00000000 0x82010000 0x00 0x00 0x00 0x400000>; + #address-cells = <3>; + #size-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + pci_ep_bus: pci-ep-bus@1 { + compatible = "simple-bus"; + ranges = <0x00 0x40000000 0x01 0x00 0x00000000 0x00 0x00400000>; + dma-ranges = <0x10 0x00000000 0x43000000 0x10 0x00000000 0x10 0x00000000>; + #address-cells = <2>; + #size-cells = <2>; + + rp1_clocks: clocks@40018000 { + compatible = "raspberrypi,rp1-clocks"; + reg = <0x00 0x40018000 0x0 0x10038>; + #clock-cells = <1>; + clocks = <&clk_rp1_xosc>; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index ceed86755da4..4bc77e3fa80d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19578,6 +19578,7 @@ RASPBERRY PI RP1 PCI DRIVER M: Andrea della Porta S: Maintained F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml +F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml F: include/dt-bindings/clock/rp1.h From patchwork Mon Jan 13 14:58:04 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrea della Porta X-Patchwork-Id: 857055 Received: from mail-ej1-f46.google.com (mail-ej1-f46.google.com [209.85.218.46]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9BBF222DFB7 for ; Mon, 13 Jan 2025 14:57:30 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.46 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780257; cv=none; b=DH4kQA+8IrgY+yWSyMMsjgqx9Rb0iI6gY+7/MZc/RD6drrJ9UQZg3nVpN4h8yjYF+VBk/msMDTcI42/Jy3Lxql9P0onqI0ZNZi5rzJy7t4+ZFm22TzM/DATUYoHch+19opiWXq85jIbZp1WoleXRhw29bS6FWYZaONor7Nn2/3k= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780257; c=relaxed/simple; bh=ivHRMWOWOPr9OAGWwZ+ZGnbgZps5ndkEizxUKFQr3Rw=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=Zs2HT3xxNUqp3ewU9w70w2KdX83mf1PMrEBiRLZNYDQsuqZZFvamO/RkoPcyCJchgAGQFHVBGphez01b2G7lNwbMW6peC5gkd9AV7wHFkcIW/mZbNyP6ioO67ucPp8TcMck29yQ81uuyWv+Cv/regThR2MYxMzDKCOQjlOGPSug= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com; spf=pass smtp.mailfrom=suse.com; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b=L51AN3re; arc=none smtp.client-ip=209.85.218.46 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=suse.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b="L51AN3re" Received: by mail-ej1-f46.google.com with SMTP id a640c23a62f3a-aaeecbb7309so824720166b.0 for ; Mon, 13 Jan 2025 06:57:30 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.com; s=google; t=1736780248; x=1737385048; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=4AScjclzP39OVAPB07TqflcsrVpcec3fG045URkU6OE=; b=L51AN3re8PJ4JnXeQfRtxRQgZErENctzans1F+NLEsnmgBXTQBMxToclcwxKUtyER6 uaQgHhewaXFrRrWO813ZqfFV+TTN1992l/dh6OSjXkDfgQPk9tAdETUHTc8pdLjlAXaP 9r249kjjfi9cPvZQUX7CnmQyW1lWowN+p2JhfCZqdQip9LTicMmqr6aRmrMLpSuN59In uya7uR+/9OSYSCb2BSTjcMXrRoOWkpnV8Lj8n5znZGTtx0CVAos4tJQHGtz2E6JTZWEc LjqNRpjhX2fOhSxCafhfQvs4n5vP3em6wW63RYmxq3XnCDHsu34r+9vkmsVzeH10y09R ZnvQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1736780248; x=1737385048; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=4AScjclzP39OVAPB07TqflcsrVpcec3fG045URkU6OE=; b=QYngt7mBK/65yP1oeUUt/eBaIkGQ0ShNwvCs6efCFsX6TCPCLhAVmJnfYCn1rqSaOS 9+WFc+9aF8ZypOnBhXSb+kbCBwE14w0bRuEtS3mmDuUYDpz8ldBIaAXOh+jofIZePGCr /ph+0/HRK+ls0gwFynkpR93Io2Qu52dUpQgYNPu8jYdcm5c4GFPpZ+XBTKpsEf1HJ3sp MJj+v6GVQ2Wa3qSG19gY3shSrqK4QLylKsvwuooQhV26YunKVnoJMZGdJ/G9oOyWXQee FRdJPRIhEFz217O6sKk6vKgkqRX8bqgyDEXtV3FbU6yKS0//Q1Kpyg9rv1sxvITGnSA7 pPPg== X-Forwarded-Encrypted: i=1; AJvYcCVFHjg+uhO+Aj/oV338PAhX1F+IsdBAtdh5KoD8xt57S3BDMlIxjNidusTFc5/Kz6wUO5UEoizTS556@vger.kernel.org X-Gm-Message-State: AOJu0Ywl6uNTDoFyUpEckFnyxfS61j+2tuFf+bqmM2I/fHxIjlg9k70e ibccrAgiKK2XM4wQua7MgetU/0UXekjOrOP737QcYGCM2h1I5jSphIjvX3mh7YM= X-Gm-Gg: ASbGncua9/9yMiU8sRbcrnPbEu4rOf82HeHsUr6xvkXXDTxUBEvLfh3QchZXy+0htog SeqHQgU9TeYmUUsF1iStT56MoW1DP0/zPiNPk+cUJwKWiFPCtvFIYSCv0BCuqHzsp3bRrgx7nLv S6Rx40kNOvS2Rd8HeWYpu0bqSk06QuFF0LrW0rvFGkLpNcWHNWrJffOOgrs8IkQVs+qaxPtXLls I0VU6Aq3R/szJZWkz7qm3SIFcTgy4eh7tNiFLVNlQMhF6CVHaazj9aF6TTxARl8HL5LbXEWXpiB +2I2gSksMxqyza8GYud9KCIp5vo= X-Google-Smtp-Source: AGHT+IFjsgNVO2ZKs3/8hpP15HTYRXf3lipB4NHHsuzhTOpsE6MoOGvN+80WQqKyPtoEpUpv+ZyYDw== X-Received: by 2002:a17:907:6ea9:b0:aae:869f:c4ad with SMTP id a640c23a62f3a-ab2ab6a85c6mr1730226566b.7.1736780248165; Mon, 13 Jan 2025 06:57:28 -0800 (PST) Received: from localhost (host-87-14-236-197.retail.telecomitalia.it. [87.14.236.197]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-ab2c956472fsm509537666b.119.2025.01.13.06.57.27 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Jan 2025 06:57:27 -0800 (PST) From: Andrea della Porta To: Andrea della Porta , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Florian Fainelli , Broadcom internal kernel review list , Lorenzo Pieralisi , Krzysztof Wilczynski , Manivannan Sadhasivam , Bjorn Helgaas , Linus Walleij , Catalin Marinas , Will Deacon , Bartosz Golaszewski , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Saravana Kannan , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, linux-gpio@vger.kernel.org, Masahiro Yamada , Stefan Wahren , Herve Codina , Luca Ceresoli , Thomas Petazzoni , Andrew Lunn Subject: [PATCH v6 05/10] clk: rp1: Add support for clocks provided by RP1 Date: Mon, 13 Jan 2025 15:58:04 +0100 Message-ID: X-Mailer: git-send-email 2.44.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 RaspberryPi RP1 is an MFD providing, among other peripherals, several clock generators and PLLs that drives the sub-peripherals. Add the driver to support the clock providers. Signed-off-by: Andrea della Porta --- MAINTAINERS | 1 + drivers/clk/Kconfig | 9 + drivers/clk/Makefile | 1 + drivers/clk/clk-rp1.c | 1527 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 1538 insertions(+) create mode 100644 drivers/clk/clk-rp1.c diff --git a/MAINTAINERS b/MAINTAINERS index 4bc77e3fa80d..9ad37eb45a51 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19581,6 +19581,7 @@ F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml F: Documentation/devicetree/bindings/misc/pci1de4,1.yaml F: Documentation/devicetree/bindings/pci/pci-ep-bus.yaml F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml +F: drivers/clk/clk-rp1.c F: include/dt-bindings/clock/rp1.h F: include/dt-bindings/misc/rp1.h diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 713573b6c86c..cff90de71409 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -88,6 +88,15 @@ config COMMON_CLK_RK808 These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each. Clkout1 is always on, Clkout2 can off by control register. +config COMMON_CLK_RP1 + tristate "Raspberry Pi RP1-based clock support" + depends on MISC_RP1 || COMPILE_TEST + default MISC_RP1 + help + Enable common clock framework support for Raspberry Pi RP1. + This multi-function device has 3 main PLLs and several clock + generators to drive the internal sub-peripherals. + config COMMON_CLK_HI655X tristate "Clock driver for Hi655x" if EXPERT depends on (MFD_HI655X_PMIC || COMPILE_TEST) diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index bf4bd45adc3a..ff3993ed7e09 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -84,6 +84,7 @@ obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o +obj-$(CONFIG_COMMON_CLK_RP1) += clk-rp1.o obj-$(CONFIG_COMMON_CLK_HI655X) += clk-hi655x.o obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o obj-$(CONFIG_COMMON_CLK_SCMI) += clk-scmi.o diff --git a/drivers/clk/clk-rp1.c b/drivers/clk/clk-rp1.c new file mode 100644 index 000000000000..d3789f5f835e --- /dev/null +++ b/drivers/clk/clk-rp1.c @@ -0,0 +1,1527 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2023 Raspberry Pi Ltd. + * + * Clock driver for RP1 PCIe multifunction chip. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include + +#define PLL_SYS_OFFSET 0x08000 +#define PLL_SYS_CS (PLL_SYS_OFFSET + 0x00) +#define PLL_SYS_PWR (PLL_SYS_OFFSET + 0x04) +#define PLL_SYS_FBDIV_INT (PLL_SYS_OFFSET + 0x08) +#define PLL_SYS_FBDIV_FRAC (PLL_SYS_OFFSET + 0x0c) +#define PLL_SYS_PRIM (PLL_SYS_OFFSET + 0x10) +#define PLL_SYS_SEC (PLL_SYS_OFFSET + 0x14) + +#define PLL_AUDIO_OFFSET 0x0c000 +#define PLL_AUDIO_CS (PLL_AUDIO_OFFSET + 0x00) +#define PLL_AUDIO_PWR (PLL_AUDIO_OFFSET + 0x04) +#define PLL_AUDIO_FBDIV_INT (PLL_AUDIO_OFFSET + 0x08) +#define PLL_AUDIO_FBDIV_FRAC (PLL_AUDIO_OFFSET + 0x0c) +#define PLL_AUDIO_PRIM (PLL_AUDIO_OFFSET + 0x10) +#define PLL_AUDIO_SEC (PLL_AUDIO_OFFSET + 0x14) +#define PLL_AUDIO_TERN (PLL_AUDIO_OFFSET + 0x18) + +#define PLL_VIDEO_OFFSET 0x10000 +#define PLL_VIDEO_CS (PLL_VIDEO_OFFSET + 0x00) +#define PLL_VIDEO_PWR (PLL_VIDEO_OFFSET + 0x04) +#define PLL_VIDEO_FBDIV_INT (PLL_VIDEO_OFFSET + 0x08) +#define PLL_VIDEO_FBDIV_FRAC (PLL_VIDEO_OFFSET + 0x0c) +#define PLL_VIDEO_PRIM (PLL_VIDEO_OFFSET + 0x10) +#define PLL_VIDEO_SEC (PLL_VIDEO_OFFSET + 0x14) + +#define GPCLK_OE_CTRL 0x00000 + +#define CLK_SYS_OFFSET 0x00014 +#define CLK_SYS_CTRL (CLK_SYS_OFFSET + 0x00) +#define CLK_SYS_DIV_INT (CLK_SYS_OFFSET + 0x04) +#define CLK_SYS_SEL (CLK_SYS_OFFSET + 0x0c) + +#define CLK_SLOW_OFFSET 0x00024 +#define CLK_SLOW_SYS_CTRL (CLK_SLOW_OFFSET + 0x00) +#define CLK_SLOW_SYS_DIV_INT (CLK_SLOW_OFFSET + 0x04) +#define CLK_SLOW_SYS_SEL (CLK_SLOW_OFFSET + 0x0c) + +#define CLK_DMA_OFFSET 0x00044 +#define CLK_DMA_CTRL (CLK_DMA_OFFSET + 0x00) +#define CLK_DMA_DIV_INT (CLK_DMA_OFFSET + 0x04) +#define CLK_DMA_SEL (CLK_DMA_OFFSET + 0x0c) + +#define CLK_UART_OFFSET 0x00054 +#define CLK_UART_CTRL (CLK_UART_OFFSET + 0x00) +#define CLK_UART_DIV_INT (CLK_UART_OFFSET + 0x04) +#define CLK_UART_SEL (CLK_UART_OFFSET + 0x0c) + +#define CLK_ETH_OFFSET 0x00064 +#define CLK_ETH_CTRL (CLK_ETH_OFFSET + 0x00) +#define CLK_ETH_DIV_INT (CLK_ETH_OFFSET + 0x04) +#define CLK_ETH_SEL (CLK_ETH_OFFSET + 0x0c) + +#define CLK_PWM0_OFFSET 0x00074 +#define CLK_PWM0_CTRL (CLK_PWM0_OFFSET + 0x00) +#define CLK_PWM0_DIV_INT (CLK_PWM0_OFFSET + 0x04) +#define CLK_PWM0_DIV_FRAC (CLK_PWM0_OFFSET + 0x08) +#define CLK_PWM0_SEL (CLK_PWM0_OFFSET + 0x0c) + +#define CLK_PWM1_OFFSET 0x00084 +#define CLK_PWM1_CTRL (CLK_PWM1_OFFSET + 0x00) +#define CLK_PWM1_DIV_INT (CLK_PWM1_OFFSET + 0x04) +#define CLK_PWM1_DIV_FRAC (CLK_PWM1_OFFSET + 0x08) +#define CLK_PWM1_SEL (CLK_PWM1_OFFSET + 0x0c) + +#define CLK_AUDIO_IN_OFFSET 0x00094 +#define CLK_AUDIO_IN_CTRL (CLK_AUDIO_IN_OFFSET + 0x00) +#define CLK_AUDIO_IN_DIV_INT (CLK_AUDIO_IN_OFFSET + 0x04) +#define CLK_AUDIO_IN_SEL (CLK_AUDIO_IN_OFFSET + 0x0c) + +#define CLK_AUDIO_OUT_OFFSET 0x000a4 +#define CLK_AUDIO_OUT_CTRL (CLK_AUDIO_OUT_OFFSET + 0x00) +#define CLK_AUDIO_OUT_DIV_INT (CLK_AUDIO_OUT_OFFSET + 0x04) +#define CLK_AUDIO_OUT_SEL (CLK_AUDIO_OUT_OFFSET + 0x0c) + +#define CLK_I2S_OFFSET 0x000b4 +#define CLK_I2S_CTRL (CLK_I2S_OFFSET + 0x00) +#define CLK_I2S_DIV_INT (CLK_I2S_OFFSET + 0x04) +#define CLK_I2S_SEL (CLK_I2S_OFFSET + 0x0c) + +#define CLK_MIPI0_CFG_OFFSET 0x000c4 +#define CLK_MIPI0_CFG_CTRL (CLK_MIPI0_CFG_OFFSET + 0x00) +#define CLK_MIPI0_CFG_DIV_INT (CLK_MIPI0_CFG_OFFSET + 0x04) +#define CLK_MIPI0_CFG_SEL (CLK_MIPI0_CFG_OFFSET + 0x0c) + +#define CLK_MIPI1_CFG_OFFSET 0x000d4 +#define CLK_MIPI1_CFG_CTRL (CLK_MIPI1_CFG_OFFSET + 0x00) +#define CLK_MIPI1_CFG_DIV_INT (CLK_MIPI1_CFG_OFFSET + 0x04) +#define CLK_MIPI1_CFG_SEL (CLK_MIPI1_CFG_OFFSET + 0x0c) + +#define CLK_PCIE_AUX_OFFSET 0x000e4 +#define CLK_PCIE_AUX_CTRL (CLK_PCIE_AUX_OFFSET + 0x00) +#define CLK_PCIE_AUX_DIV_INT (CLK_PCIE_AUX_OFFSET + 0x04) +#define CLK_PCIE_AUX_SEL (CLK_PCIE_AUX_OFFSET + 0x0c) + +#define CLK_USBH0_MICROFRAME_OFFSET 0x000f4 +#define CLK_USBH0_MICROFRAME_CTRL (CLK_USBH0_MICROFRAME_OFFSET + 0x00) +#define CLK_USBH0_MICROFRAME_DIV_INT (CLK_USBH0_MICROFRAME_OFFSET + 0x04) +#define CLK_USBH0_MICROFRAME_SEL (CLK_USBH0_MICROFRAME_OFFSET + 0x0c) + +#define CLK_USBH1_MICROFRAME_OFFSET 0x00104 +#define CLK_USBH1_MICROFRAME_CTRL (CLK_USBH1_MICROFRAME_OFFSET + 0x00) +#define CLK_USBH1_MICROFRAME_DIV_INT (CLK_USBH1_MICROFRAME_OFFSET + 0x04) +#define CLK_USBH1_MICROFRAME_SEL (CLK_USBH1_MICROFRAME_OFFSET + 0x0c) + +#define CLK_USBH0_SUSPEND_OFFSET 0x00114 +#define CLK_USBH0_SUSPEND_CTRL (CLK_USBH0_SUSPEND_OFFSET + 0x00) +#define CLK_USBH0_SUSPEND_DIV_INT (CLK_USBH0_SUSPEND_OFFSET + 0x04) +#define CLK_USBH0_SUSPEND_SEL (CLK_USBH0_SUSPEND_OFFSET + 0x0c) + +#define CLK_USBH1_SUSPEND_OFFSET 0x00124 +#define CLK_USBH1_SUSPEND_CTRL (CLK_USBH1_SUSPEND_OFFSET + 0x00) +#define CLK_USBH1_SUSPEND_DIV_INT (CLK_USBH1_SUSPEND_OFFSET + 0x04) +#define CLK_USBH1_SUSPEND_SEL (CLK_USBH1_SUSPEND_OFFSET + 0x0c) + +#define CLK_ETH_TSU_OFFSET 0x00134 +#define CLK_ETH_TSU_CTRL (CLK_ETH_TSU_OFFSET + 0x00) +#define CLK_ETH_TSU_DIV_INT (CLK_ETH_TSU_OFFSET + 0x04) +#define CLK_ETH_TSU_SEL (CLK_ETH_TSU_OFFSET + 0x0c) + +#define CLK_ADC_OFFSET 0x00144 +#define CLK_ADC_CTRL (CLK_ADC_OFFSET + 0x00) +#define CLK_ADC_DIV_INT (CLK_ADC_OFFSET + 0x04) +#define CLK_ADC_SEL (CLK_ADC_OFFSET + 0x0c) + +#define CLK_SDIO_TIMER_OFFSET 0x00154 +#define CLK_SDIO_TIMER_CTRL (CLK_SDIO_TIMER_OFFSET + 0x00) +#define CLK_SDIO_TIMER_DIV_INT (CLK_SDIO_TIMER_OFFSET + 0x04) +#define CLK_SDIO_TIMER_SEL (CLK_SDIO_TIMER_OFFSET + 0x0c) + +#define CLK_SDIO_ALT_SRC_OFFSET 0x00164 +#define CLK_SDIO_ALT_SRC_CTRL (CLK_SDIO_ALT_SRC_OFFSET + 0x00) +#define CLK_SDIO_ALT_SRC_DIV_INT (CLK_SDIO_ALT_SRC_OFFSET + 0x04) +#define CLK_SDIO_ALT_SRC_SEL (CLK_SDIO_ALT_SRC_OFFSET + 0x0c) + +#define CLK_GP0_OFFSET 0x00174 +#define CLK_GP0_CTRL (CLK_GP0_OFFSET + 0x00) +#define CLK_GP0_DIV_INT (CLK_GP0_OFFSET + 0x04) +#define CLK_GP0_DIV_FRAC (CLK_GP0_OFFSET + 0x08) +#define CLK_GP0_SEL (CLK_GP0_OFFSET + 0x0c) + +#define CLK_GP1_OFFSET 0x00184 +#define CLK_GP1_CTRL (CLK_GP1_OFFSET + 0x00) +#define CLK_GP1_DIV_INT (CLK_GP1_OFFSET + 0x04) +#define CLK_GP1_DIV_FRAC (CLK_GP1_OFFSET + 0x08) +#define CLK_GP1_SEL (CLK_GP1_OFFSET + 0x0c) + +#define CLK_GP2_OFFSET 0x00194 +#define CLK_GP2_CTRL (CLK_GP2_OFFSET + 0x00) +#define CLK_GP2_DIV_INT (CLK_GP2_OFFSET + 0x04) +#define CLK_GP2_DIV_FRAC (CLK_GP2_OFFSET + 0x08) +#define CLK_GP2_SEL (CLK_GP2_OFFSET + 0x0c) + +#define CLK_GP3_OFFSET 0x001a4 +#define CLK_GP3_CTRL (CLK_GP3_OFFSET + 0x00) +#define CLK_GP3_DIV_INT (CLK_GP3_OFFSET + 0x04) +#define CLK_GP3_DIV_FRAC (CLK_GP3_OFFSET + 0x08) +#define CLK_GP3_SEL (CLK_GP3_OFFSET + 0x0c) + +#define CLK_GP4_OFFSET 0x001b4 +#define CLK_GP4_CTRL (CLK_GP4_OFFSET + 0x00) +#define CLK_GP4_DIV_INT (CLK_GP4_OFFSET + 0x04) +#define CLK_GP4_DIV_FRAC (CLK_GP4_OFFSET + 0x08) +#define CLK_GP4_SEL (CLK_GP4_OFFSET + 0x0c) + +#define CLK_GP5_OFFSET 0x001c4 +#define CLK_GP5_CTRL (CLK_GP5_OFFSET + 0x00) +#define CLK_GP5_DIV_INT (CLK_GP5_OFFSET + 0x04) +#define CLK_GP5_DIV_FRAC (CLK_GP5_OFFSET + 0x08) +#define CLK_GP5_SEL (CLK_GP5_OFFSET + 0x0c) + +#define CLK_SYS_RESUS_CTRL 0x0020c + +#define CLK_SLOW_SYS_RESUS_CTRL 0x00214 + +#define FC0_OFFSET 0x0021c +#define FC0_REF_KHZ (FC0_OFFSET + 0x00) +#define FC0_MIN_KHZ (FC0_OFFSET + 0x04) +#define FC0_MAX_KHZ (FC0_OFFSET + 0x08) +#define FC0_DELAY (FC0_OFFSET + 0x0c) +#define FC0_INTERVAL (FC0_OFFSET + 0x10) +#define FC0_SRC (FC0_OFFSET + 0x14) +#define FC0_STATUS (FC0_OFFSET + 0x18) +#define FC0_RESULT (FC0_OFFSET + 0x1c) +#define FC_SIZE 0x20 +#define FC_COUNT 8 +#define FC_NUM(idx, off) ((idx) * 32 + (off)) + +#define AUX_SEL 1 + +#define VIDEO_CLOCKS_OFFSET 0x4000 +#define VIDEO_CLK_VEC_CTRL (VIDEO_CLOCKS_OFFSET + 0x0000) +#define VIDEO_CLK_VEC_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0004) +#define VIDEO_CLK_VEC_SEL (VIDEO_CLOCKS_OFFSET + 0x000c) +#define VIDEO_CLK_DPI_CTRL (VIDEO_CLOCKS_OFFSET + 0x0010) +#define VIDEO_CLK_DPI_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0014) +#define VIDEO_CLK_DPI_SEL (VIDEO_CLOCKS_OFFSET + 0x001c) +#define VIDEO_CLK_MIPI0_DPI_CTRL (VIDEO_CLOCKS_OFFSET + 0x0020) +#define VIDEO_CLK_MIPI0_DPI_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0024) +#define VIDEO_CLK_MIPI0_DPI_DIV_FRAC (VIDEO_CLOCKS_OFFSET + 0x0028) +#define VIDEO_CLK_MIPI0_DPI_SEL (VIDEO_CLOCKS_OFFSET + 0x002c) +#define VIDEO_CLK_MIPI1_DPI_CTRL (VIDEO_CLOCKS_OFFSET + 0x0030) +#define VIDEO_CLK_MIPI1_DPI_DIV_INT (VIDEO_CLOCKS_OFFSET + 0x0034) +#define VIDEO_CLK_MIPI1_DPI_DIV_FRAC (VIDEO_CLOCKS_OFFSET + 0x0038) +#define VIDEO_CLK_MIPI1_DPI_SEL (VIDEO_CLOCKS_OFFSET + 0x003c) + +#define DIV_INT_8BIT_MAX GENMASK(7, 0) /* max divide for most clocks */ +#define DIV_INT_16BIT_MAX GENMASK(15, 0) /* max divide for GPx, PWM */ +#define DIV_INT_24BIT_MAX GENMASK(23, 0) /* max divide for CLK_SYS */ + +#define FC0_STATUS_DONE BIT(4) +#define FC0_STATUS_RUNNING BIT(8) +#define FC0_RESULT_FRAC_SHIFT 5 + +#define PLL_PRIM_DIV1_SHIFT 16 +#define PLL_PRIM_DIV1_WIDTH 3 +#define PLL_PRIM_DIV1_MASK GENMASK(PLL_PRIM_DIV1_SHIFT + \ + PLL_PRIM_DIV1_WIDTH - 1, \ + PLL_PRIM_DIV1_SHIFT) +#define PLL_PRIM_DIV2_SHIFT 12 +#define PLL_PRIM_DIV2_WIDTH 3 +#define PLL_PRIM_DIV2_MASK GENMASK(PLL_PRIM_DIV2_SHIFT + \ + PLL_PRIM_DIV2_WIDTH - 1, \ + PLL_PRIM_DIV2_SHIFT) + +#define PLL_SEC_DIV_SHIFT 8 +#define PLL_SEC_DIV_WIDTH 5 +#define PLL_SEC_DIV_MASK GENMASK(PLL_SEC_DIV_SHIFT + \ + PLL_SEC_DIV_WIDTH - 1, \ + PLL_SEC_DIV_SHIFT) + +#define PLL_CS_LOCK BIT(31) +#define PLL_CS_REFDIV_SHIFT 0 + +#define PLL_PWR_PD BIT(0) +#define PLL_PWR_DACPD BIT(1) +#define PLL_PWR_DSMPD BIT(2) +#define PLL_PWR_POSTDIVPD BIT(3) +#define PLL_PWR_4PHASEPD BIT(4) +#define PLL_PWR_VCOPD BIT(5) +#define PLL_PWR_MASK GENMASK(5, 0) + +#define PLL_SEC_RST BIT(16) +#define PLL_SEC_IMPL BIT(31) + +/* PLL phase output for both PRI and SEC */ +#define PLL_PH_EN BIT(4) +#define PLL_PH_PHASE_SHIFT 0 + +#define RP1_PLL_PHASE_0 0 +#define RP1_PLL_PHASE_90 1 +#define RP1_PLL_PHASE_180 2 +#define RP1_PLL_PHASE_270 3 + +/* Clock fields for all clocks */ +#define CLK_CTRL_ENABLE BIT(11) +#define CLK_CTRL_AUXSRC_SHIFT 5 +#define CLK_CTRL_AUXSRC_WIDTH 5 +#define CLK_CTRL_AUXSRC_MASK GENMASK(CLK_CTRL_AUXSRC_SHIFT + \ + CLK_CTRL_AUXSRC_WIDTH - 1, \ + CLK_CTRL_AUXSRC_SHIFT) +#define CLK_CTRL_SRC_SHIFT 0 +#define CLK_DIV_FRAC_BITS 16 + +#define LOCK_TIMEOUT_US 100000 +#define LOCK_POLL_DELAY_US 5 + +#define MAX_CLK_PARENTS 16 + +/* + * Secondary PLL channel output divider table. + * Divider values range from 8 to 19. + * Invalid values default to 19 + */ +static const struct clk_div_table pll_sec_div_table[] = { + { 0x00, 19 }, + { 0x01, 19 }, + { 0x02, 19 }, + { 0x03, 19 }, + { 0x04, 19 }, + { 0x05, 19 }, + { 0x06, 19 }, + { 0x07, 19 }, + { 0x08, 8 }, + { 0x09, 9 }, + { 0x0a, 10 }, + { 0x0b, 11 }, + { 0x0c, 12 }, + { 0x0d, 13 }, + { 0x0e, 14 }, + { 0x0f, 15 }, + { 0x10, 16 }, + { 0x11, 17 }, + { 0x12, 18 }, + { 0x13, 19 }, + { 0x14, 19 }, + { 0x15, 19 }, + { 0x16, 19 }, + { 0x17, 19 }, + { 0x18, 19 }, + { 0x19, 19 }, + { 0x1a, 19 }, + { 0x1b, 19 }, + { 0x1c, 19 }, + { 0x1d, 19 }, + { 0x1e, 19 }, + { 0x1f, 19 }, + { 0 } +}; + +struct rp1_clockman { + struct device *dev; + void __iomem *regs; + struct regmap *regmap; + spinlock_t regs_lock; /* spinlock for all clocks */ + + /* Must be last */ + struct clk_hw_onecell_data onecell; +}; + +struct rp1_pll_core_data { + u32 cs_reg; + u32 pwr_reg; + u32 fbdiv_int_reg; + u32 fbdiv_frac_reg; + u32 fc0_src; +}; + +struct rp1_pll_data { + u32 ctrl_reg; + u32 fc0_src; +}; + +struct rp1_pll_ph_data { + unsigned int phase; + unsigned int fixed_divider; + u32 ph_reg; + u32 fc0_src; +}; + +struct rp1_pll_divider_data { + u32 sec_reg; + u32 fc0_src; +}; + +struct rp1_clock_data { + int num_std_parents; + int num_aux_parents; + u32 oe_mask; + u32 clk_src_mask; + u32 ctrl_reg; + u32 div_int_reg; + u32 div_frac_reg; + u32 sel_reg; + u32 div_int_max; + unsigned long max_freq; + u32 fc0_src; +}; + +struct rp1_clk_desc { + struct clk_hw *(*clk_register)(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc); + const void *data; + struct clk_hw hw; + struct rp1_clockman *clockman; + unsigned long cached_rate; + struct clk_divider div; +}; + +static inline +void clockman_write(struct rp1_clockman *clockman, u32 reg, u32 val) +{ + regmap_write(clockman->regmap, reg, val); +} + +static inline u32 clockman_read(struct rp1_clockman *clockman, u32 reg) +{ + u32 val; + + regmap_read(clockman->regmap, reg, &val); + + return val; +} + +static int rp1_pll_core_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + u32 pwr = clockman_read(clockman, data->pwr_reg); + + return (pwr & PLL_PWR_PD) || (pwr & PLL_PWR_POSTDIVPD); +} + +static int rp1_pll_core_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + u32 fbdiv_frac, val; + int ret; + + spin_lock(&clockman->regs_lock); + + if (!(clockman_read(clockman, data->cs_reg) & PLL_CS_LOCK)) { + /* Reset to a known state. */ + clockman_write(clockman, data->pwr_reg, PLL_PWR_MASK); + clockman_write(clockman, data->fbdiv_int_reg, 20); + clockman_write(clockman, data->fbdiv_frac_reg, 0); + clockman_write(clockman, data->cs_reg, 1 << PLL_CS_REFDIV_SHIFT); + } + + /* Come out of reset. */ + fbdiv_frac = clockman_read(clockman, data->fbdiv_frac_reg); + clockman_write(clockman, data->pwr_reg, fbdiv_frac ? 0 : PLL_PWR_DSMPD); + spin_unlock(&clockman->regs_lock); + + /* Wait for the PLL to lock. */ + ret = regmap_read_poll_timeout(clockman->regmap, data->cs_reg, val, + val & PLL_CS_LOCK, + LOCK_POLL_DELAY_US, LOCK_TIMEOUT_US); + if (ret) + dev_err(clockman->dev, "%s: can't lock PLL\n", + clk_hw_get_name(hw)); + + return ret; +} + +static void rp1_pll_core_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->pwr_reg, 0); + spin_unlock(&clockman->regs_lock); +} + +static inline unsigned long get_pll_core_divider(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u32 *div_int, u32 *div_frac) +{ + u32 fbdiv_int, fbdiv_frac; + unsigned long calc_rate; + u64 shifted_fbdiv_int; + u64 div_fp64; /* 32.32 fixed point fraction. */ + + /* Factor of reference clock to VCO frequency. */ + div_fp64 = (u64)(rate) << 32; + div_fp64 = DIV_ROUND_CLOSEST_ULL(div_fp64, parent_rate); + + /* Round the fractional component at 24 bits. */ + div_fp64 += 1 << (32 - 24 - 1); + + fbdiv_int = div_fp64 >> 32; + fbdiv_frac = (div_fp64 >> (32 - 24)) & 0xffffff; + + shifted_fbdiv_int = (u64)fbdiv_int << 24; + calc_rate = (u64)parent_rate * (shifted_fbdiv_int + fbdiv_frac); + calc_rate += BIT(23); + calc_rate >>= 24; + + *div_int = fbdiv_int; + *div_frac = fbdiv_frac; + + return calc_rate; +} + +static int rp1_pll_core_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + unsigned long calc_rate; + u32 fbdiv_int, fbdiv_frac; + + /* Disable dividers to start with. */ + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->fbdiv_int_reg, 0); + clockman_write(clockman, data->fbdiv_frac_reg, 0); + spin_unlock(&clockman->regs_lock); + + calc_rate = get_pll_core_divider(hw, rate, parent_rate, + &fbdiv_int, &fbdiv_frac); + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->pwr_reg, fbdiv_frac ? 0 : PLL_PWR_DSMPD); + clockman_write(clockman, data->fbdiv_int_reg, fbdiv_int); + clockman_write(clockman, data->fbdiv_frac_reg, fbdiv_frac); + spin_unlock(&clockman->regs_lock); + + /* Check that reference frequency is no greater than VCO / 16. */ + if (WARN_ON_ONCE(parent_rate > (rate / 16))) + return -ERANGE; + + pll_core->cached_rate = calc_rate; + + spin_lock(&clockman->regs_lock); + /* Don't need to divide ref unless parent_rate > (output freq / 16) */ + clockman_write(clockman, data->cs_reg, + clockman_read(clockman, data->cs_reg) | + (1 << PLL_CS_REFDIV_SHIFT)); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static unsigned long rp1_pll_core_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *pll_core = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_core->clockman; + const struct rp1_pll_core_data *data = pll_core->data; + + u32 fbdiv_int, fbdiv_frac; + unsigned long calc_rate; + u64 shifted_fbdiv_int; + + fbdiv_int = clockman_read(clockman, data->fbdiv_int_reg); + fbdiv_frac = clockman_read(clockman, data->fbdiv_frac_reg); + + shifted_fbdiv_int = (u64)fbdiv_int << 24; + calc_rate = (u64)parent_rate * (shifted_fbdiv_int + fbdiv_frac); + calc_rate += BIT(23); + calc_rate >>= 24; + + return calc_rate; +} + +static long rp1_pll_core_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + u32 fbdiv_int, fbdiv_frac; + + return get_pll_core_divider(hw, rate, *parent_rate, + &fbdiv_int, &fbdiv_frac); +} + +static void get_pll_prim_dividers(unsigned long rate, unsigned long parent_rate, + u32 *divider1, u32 *divider2) +{ + unsigned int div1, div2; + unsigned int best_div1 = 7, best_div2 = 7; + unsigned long best_rate_diff = + abs_diff(DIV_ROUND_CLOSEST(parent_rate, best_div1 * best_div2), rate); + unsigned long rate_diff, calc_rate; + + for (div1 = 1; div1 <= 7; div1++) { + for (div2 = 1; div2 <= div1; div2++) { + calc_rate = DIV_ROUND_CLOSEST(parent_rate, div1 * div2); + rate_diff = abs_diff(calc_rate, rate); + + if (calc_rate == rate) { + best_div1 = div1; + best_div2 = div2; + goto done; + } else if (rate_diff < best_rate_diff) { + best_div1 = div1; + best_div2 = div2; + best_rate_diff = rate_diff; + } + } + } + +done: + *divider1 = best_div1; + *divider2 = best_div2; +} + +static int rp1_pll_set_rate(struct clk_hw *hw, + unsigned long rate, unsigned long parent_rate) +{ + struct rp1_clk_desc *pll = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll->clockman; + const struct rp1_pll_data *data = pll->data; + + u32 prim, prim_div1, prim_div2; + + get_pll_prim_dividers(rate, parent_rate, &prim_div1, &prim_div2); + + spin_lock(&clockman->regs_lock); + prim = clockman_read(clockman, data->ctrl_reg); + prim &= ~PLL_PRIM_DIV1_MASK; + prim |= FIELD_PREP(PLL_PRIM_DIV1_MASK, prim_div1); + prim &= ~PLL_PRIM_DIV2_MASK; + prim |= FIELD_PREP(PLL_PRIM_DIV2_MASK, prim_div2); + clockman_write(clockman, data->ctrl_reg, prim); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static unsigned long rp1_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *pll = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll->clockman; + const struct rp1_pll_data *data = pll->data; + u32 prim, prim_div1, prim_div2; + + prim = clockman_read(clockman, data->ctrl_reg); + prim_div1 = (prim & PLL_PRIM_DIV1_MASK) >> PLL_PRIM_DIV1_SHIFT; + prim_div2 = (prim & PLL_PRIM_DIV2_MASK) >> PLL_PRIM_DIV2_SHIFT; + + if (!prim_div1 || !prim_div2) { + dev_err(clockman->dev, "%s: (%s) zero divider value\n", + __func__, clk_hw_get_name(hw)); + return 0; + } + + return DIV_ROUND_CLOSEST(parent_rate, prim_div1 * prim_div2); +} + +static long rp1_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + u32 div1, div2; + + get_pll_prim_dividers(rate, *parent_rate, &div1, &div2); + + return DIV_ROUND_CLOSEST(*parent_rate, div1 * div2); +} + +static int rp1_pll_ph_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_ph->clockman; + const struct rp1_pll_ph_data *data = pll_ph->data; + + return !!(clockman_read(clockman, data->ph_reg) & PLL_PH_EN); +} + +static int rp1_pll_ph_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_ph->clockman; + const struct rp1_pll_ph_data *data = pll_ph->data; + u32 ph_reg; + + /* TODO: ensure pri/sec is enabled! */ + spin_lock(&clockman->regs_lock); + ph_reg = clockman_read(clockman, data->ph_reg); + ph_reg |= data->phase << PLL_PH_PHASE_SHIFT; + ph_reg |= PLL_PH_EN; + clockman_write(clockman, data->ph_reg, ph_reg); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static void rp1_pll_ph_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = pll_ph->clockman; + const struct rp1_pll_ph_data *data = pll_ph->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ph_reg, + clockman_read(clockman, data->ph_reg) & ~PLL_PH_EN); + spin_unlock(&clockman->regs_lock); +} + +static unsigned long rp1_pll_ph_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + const struct rp1_pll_ph_data *data = pll_ph->data; + + return parent_rate / data->fixed_divider; +} + +static long rp1_pll_ph_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct rp1_clk_desc *pll_ph = container_of(hw, struct rp1_clk_desc, hw); + const struct rp1_pll_ph_data *data = pll_ph->data; + + return *parent_rate / data->fixed_divider; +} + +static int rp1_pll_divider_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + + return !(clockman_read(clockman, data->ctrl_reg) & PLL_SEC_RST); +} + +static int rp1_pll_divider_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + + spin_lock(&clockman->regs_lock); + /* Check the implementation bit is set! */ + WARN_ON(!(clockman_read(clockman, data->ctrl_reg) & PLL_SEC_IMPL)); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) & ~PLL_SEC_RST); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static void rp1_pll_divider_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) | PLL_SEC_RST); + spin_unlock(&clockman->regs_lock); +} + +static int rp1_pll_divider_set_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate) +{ + struct rp1_clk_desc *divider = container_of(hw, struct rp1_clk_desc, div.hw); + struct rp1_clockman *clockman = divider->clockman; + const struct rp1_pll_data *data = divider->data; + u32 div, sec; + + div = DIV_ROUND_UP_ULL(parent_rate, rate); + div = clamp(div, 8u, 19u); + + spin_lock(&clockman->regs_lock); + sec = clockman_read(clockman, data->ctrl_reg); + sec &= ~PLL_SEC_DIV_MASK; + sec |= FIELD_PREP(PLL_SEC_DIV_MASK, div); + + /* Must keep the divider in reset to change the value. */ + sec |= PLL_SEC_RST; + clockman_write(clockman, data->ctrl_reg, sec); + + /* TODO: must sleep 10 pll vco cycles */ + sec &= ~PLL_SEC_RST; + clockman_write(clockman, data->ctrl_reg, sec); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static unsigned long rp1_pll_divider_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + return clk_divider_ops.recalc_rate(hw, parent_rate); +} + +static long rp1_pll_divider_round_rate(struct clk_hw *hw, + unsigned long rate, + unsigned long *parent_rate) +{ + return clk_divider_ops.round_rate(hw, rate, parent_rate); +} + +static int rp1_clock_is_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + + return !!(clockman_read(clockman, data->ctrl_reg) & CLK_CTRL_ENABLE); +} + +static unsigned long rp1_clock_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u64 calc_rate; + u64 div; + + u32 frac; + + div = clockman_read(clockman, data->div_int_reg); + frac = (data->div_frac_reg != 0) ? + clockman_read(clockman, data->div_frac_reg) : 0; + + /* If the integer portion of the divider is 0, treat it as 2^16 */ + if (!div) + div = 1 << 16; + + div = (div << CLK_DIV_FRAC_BITS) | (frac >> (32 - CLK_DIV_FRAC_BITS)); + + calc_rate = (u64)parent_rate << CLK_DIV_FRAC_BITS; + calc_rate = div64_u64(calc_rate, div); + + return calc_rate; +} + +static int rp1_clock_on(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) | CLK_CTRL_ENABLE); + /* If this is a GPCLK, turn on the output-enable */ + if (data->oe_mask) + clockman_write(clockman, GPCLK_OE_CTRL, + clockman_read(clockman, GPCLK_OE_CTRL) | data->oe_mask); + spin_unlock(&clockman->regs_lock); + + return 0; +} + +static void rp1_clock_off(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + + spin_lock(&clockman->regs_lock); + clockman_write(clockman, data->ctrl_reg, + clockman_read(clockman, data->ctrl_reg) & ~CLK_CTRL_ENABLE); + /* If this is a GPCLK, turn off the output-enable */ + if (data->oe_mask) + clockman_write(clockman, GPCLK_OE_CTRL, + clockman_read(clockman, GPCLK_OE_CTRL) & ~data->oe_mask); + spin_unlock(&clockman->regs_lock); +} + +static u32 rp1_clock_choose_div(unsigned long rate, unsigned long parent_rate, + const struct rp1_clock_data *data) +{ + u64 div; + + /* + * Due to earlier rounding, calculated parent_rate may differ from + * expected value. Don't fail on a small discrepancy near unity divide. + */ + if (!rate || rate > parent_rate + (parent_rate >> CLK_DIV_FRAC_BITS)) + return 0; + + /* + * Always express div in fixed-point format for fractional division; + * If no fractional divider is present, the fraction part will be zero. + */ + if (data->div_frac_reg) { + div = (u64)parent_rate << CLK_DIV_FRAC_BITS; + div = DIV_ROUND_CLOSEST_ULL(div, rate); + } else { + div = DIV_ROUND_CLOSEST_ULL(parent_rate, rate); + div <<= CLK_DIV_FRAC_BITS; + } + + div = clamp(div, + 1ull << CLK_DIV_FRAC_BITS, + (u64)data->div_int_max << CLK_DIV_FRAC_BITS); + + return div; +} + +static u8 rp1_clock_get_parent(struct clk_hw *hw) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u32 sel, ctrl; + u8 parent; + + /* Sel is one-hot, so find the first bit set */ + sel = clockman_read(clockman, data->sel_reg); + parent = ffs(sel) - 1; + + /* sel == 0 implies the parent clock is not enabled yet. */ + if (!sel) { + /* Read the clock src from the CTRL register instead */ + ctrl = clockman_read(clockman, data->ctrl_reg); + parent = (ctrl & data->clk_src_mask) >> CLK_CTRL_SRC_SHIFT; + } + + if (parent >= data->num_std_parents) + parent = AUX_SEL; + + if (parent == AUX_SEL) { + /* + * Clock parent is an auxiliary source, so get the parent from + * the AUXSRC register field. + */ + ctrl = clockman_read(clockman, data->ctrl_reg); + parent = (ctrl & CLK_CTRL_AUXSRC_MASK) >> CLK_CTRL_AUXSRC_SHIFT; + parent += data->num_std_parents; + } + + return parent; +} + +static int rp1_clock_set_parent(struct clk_hw *hw, u8 index) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u32 ctrl, sel; + + spin_lock(&clockman->regs_lock); + ctrl = clockman_read(clockman, data->ctrl_reg); + + if (index >= data->num_std_parents) { + /* This is an aux source request */ + if (index >= data->num_std_parents + data->num_aux_parents) { + spin_unlock(&clockman->regs_lock); + return -EINVAL; + } + + /* Select parent from aux list */ + ctrl &= ~CLK_CTRL_AUXSRC_MASK; + ctrl |= FIELD_PREP(CLK_CTRL_AUXSRC_MASK, index - data->num_std_parents); + /* Set src to aux list */ + ctrl &= ~data->clk_src_mask; + ctrl |= (AUX_SEL << CLK_CTRL_SRC_SHIFT) & data->clk_src_mask; + } else { + ctrl &= ~data->clk_src_mask; + ctrl |= (index << CLK_CTRL_SRC_SHIFT) & data->clk_src_mask; + } + + clockman_write(clockman, data->ctrl_reg, ctrl); + spin_unlock(&clockman->regs_lock); + + sel = rp1_clock_get_parent(hw); + WARN(sel != index, "(%s): Parent index req %u returned back %u\n", + clk_hw_get_name(hw), index, sel); + + return 0; +} + +static int rp1_clock_set_rate_and_parent(struct clk_hw *hw, + unsigned long rate, + unsigned long parent_rate, + u8 parent) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + struct rp1_clockman *clockman = clock->clockman; + const struct rp1_clock_data *data = clock->data; + u32 div = rp1_clock_choose_div(rate, parent_rate, data); + + WARN(rate > 4000000000ll, "rate is -ve (%d)\n", (int)rate); + + if (WARN(!div, + "clk divider calculated as 0! (%s, rate %ld, parent rate %ld)\n", + clk_hw_get_name(hw), rate, parent_rate)) + div = 1 << CLK_DIV_FRAC_BITS; + + spin_lock(&clockman->regs_lock); + + clockman_write(clockman, data->div_int_reg, div >> CLK_DIV_FRAC_BITS); + if (data->div_frac_reg) + clockman_write(clockman, data->div_frac_reg, div << (32 - CLK_DIV_FRAC_BITS)); + + spin_unlock(&clockman->regs_lock); + + if (parent != 0xff) + rp1_clock_set_parent(hw, parent); + + return 0; +} + +static int rp1_clock_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + return rp1_clock_set_rate_and_parent(hw, rate, parent_rate, 0xff); +} + +static void rp1_clock_choose_div_and_prate(struct clk_hw *hw, + int parent_idx, + unsigned long rate, + unsigned long *prate, + unsigned long *calc_rate) +{ + struct rp1_clk_desc *clock = container_of(hw, struct rp1_clk_desc, hw); + const struct rp1_clock_data *data = clock->data; + struct clk_hw *parent; + u32 div; + u64 tmp; + + parent = clk_hw_get_parent_by_index(hw, parent_idx); + + *prate = clk_hw_get_rate(parent); + div = rp1_clock_choose_div(rate, *prate, data); + + if (!div) { + *calc_rate = 0; + return; + } + + /* Recalculate to account for rounding errors */ + tmp = (u64)*prate << CLK_DIV_FRAC_BITS; + tmp = div_u64(tmp, div); + + /* + * Prevent overclocks - if all parent choices result in + * a downstream clock in excess of the maximum, then the + * call to set the clock will fail. + */ + if (tmp > data->max_freq) + *calc_rate = 0; + else + *calc_rate = tmp; +} + +static int rp1_clock_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct clk_hw *parent, *best_parent = NULL; + unsigned long best_rate = 0; + unsigned long best_prate = 0; + unsigned long best_rate_diff = ULONG_MAX; + unsigned long prate, calc_rate; + size_t i; + + /* + * If the NO_REPARENT flag is set, try to use existing parent. + */ + if ((clk_hw_get_flags(hw) & CLK_SET_RATE_NO_REPARENT)) { + i = rp1_clock_get_parent(hw); + parent = clk_hw_get_parent_by_index(hw, i); + if (parent) { + rp1_clock_choose_div_and_prate(hw, i, req->rate, &prate, + &calc_rate); + if (calc_rate > 0) { + req->best_parent_hw = parent; + req->best_parent_rate = prate; + req->rate = calc_rate; + return 0; + } + } + } + + /* + * Select parent clock that results in the closest rate (lower or + * higher) + */ + for (i = 0; i < clk_hw_get_num_parents(hw); i++) { + parent = clk_hw_get_parent_by_index(hw, i); + if (!parent) + continue; + + rp1_clock_choose_div_and_prate(hw, i, req->rate, &prate, + &calc_rate); + + if (abs_diff(calc_rate, req->rate) < best_rate_diff) { + best_parent = parent; + best_prate = prate; + best_rate = calc_rate; + best_rate_diff = abs_diff(calc_rate, req->rate); + + if (best_rate_diff == 0) + break; + } + } + + if (best_rate == 0) + return -EINVAL; + + req->best_parent_hw = best_parent; + req->best_parent_rate = best_prate; + req->rate = best_rate; + + return 0; +} + +static const struct clk_ops rp1_pll_core_ops = { + .is_prepared = rp1_pll_core_is_on, + .prepare = rp1_pll_core_on, + .unprepare = rp1_pll_core_off, + .set_rate = rp1_pll_core_set_rate, + .recalc_rate = rp1_pll_core_recalc_rate, + .round_rate = rp1_pll_core_round_rate, +}; + +static const struct clk_ops rp1_pll_ops = { + .set_rate = rp1_pll_set_rate, + .recalc_rate = rp1_pll_recalc_rate, + .round_rate = rp1_pll_round_rate, +}; + +static const struct clk_ops rp1_pll_ph_ops = { + .is_prepared = rp1_pll_ph_is_on, + .prepare = rp1_pll_ph_on, + .unprepare = rp1_pll_ph_off, + .recalc_rate = rp1_pll_ph_recalc_rate, + .round_rate = rp1_pll_ph_round_rate, +}; + +static const struct clk_ops rp1_pll_divider_ops = { + .is_prepared = rp1_pll_divider_is_on, + .prepare = rp1_pll_divider_on, + .unprepare = rp1_pll_divider_off, + .set_rate = rp1_pll_divider_set_rate, + .recalc_rate = rp1_pll_divider_recalc_rate, + .round_rate = rp1_pll_divider_round_rate, +}; + +static const struct clk_ops rp1_clk_ops = { + .is_prepared = rp1_clock_is_on, + .prepare = rp1_clock_on, + .unprepare = rp1_clock_off, + .recalc_rate = rp1_clock_recalc_rate, + .get_parent = rp1_clock_get_parent, + .set_parent = rp1_clock_set_parent, + .set_rate_and_parent = rp1_clock_set_rate_and_parent, + .set_rate = rp1_clock_set_rate, + .determine_rate = rp1_clock_determine_rate, +}; + +static struct clk_hw *rp1_register_pll(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc) +{ + int ret; + + desc->clockman = clockman; + + ret = devm_clk_hw_register(clockman->dev, &desc->hw); + + if (ret) + return ERR_PTR(ret); + + return &desc->hw; +} + +static struct clk_hw *rp1_register_pll_divider(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc) +{ + const struct rp1_pll_data *divider_data = desc->data; + int ret; + + desc->div.reg = clockman->regs + divider_data->ctrl_reg; + desc->div.shift = PLL_SEC_DIV_SHIFT; + desc->div.width = PLL_SEC_DIV_WIDTH; + desc->div.flags = CLK_DIVIDER_ROUND_CLOSEST; + desc->div.lock = &clockman->regs_lock; + desc->div.hw.init = desc->hw.init; + desc->div.table = pll_sec_div_table; + + desc->clockman = clockman; + + ret = devm_clk_hw_register(clockman->dev, &desc->div.hw); + + if (ret) + return ERR_PTR(ret); + + return &desc->div.hw; +} + +static struct clk_hw *rp1_register_clock(struct rp1_clockman *clockman, + struct rp1_clk_desc *desc) +{ + const struct rp1_clock_data *clock_data = desc->data; + int ret; + + if (WARN_ON_ONCE(MAX_CLK_PARENTS < + clock_data->num_std_parents + clock_data->num_aux_parents)) + return NULL; + + /* There must be a gap for the AUX selector */ + if (WARN_ON_ONCE(clock_data->num_std_parents > AUX_SEL && + desc->hw.init->parent_data[AUX_SEL].index != -1)) + return NULL; + + desc->clockman = clockman; + + ret = devm_clk_hw_register(clockman->dev, &desc->hw); + + if (ret) + return ERR_PTR(ret); + + return &desc->hw; +} + +/* Assignment helper macros for different clock types. */ +#define _REGISTER(f, ...) { .clk_register = f, __VA_ARGS__ } + +#define CLK_DATA(type, ...) .data = &(struct type) { __VA_ARGS__ } + +#define REGISTER_PLL(...) _REGISTER(&rp1_register_pll, \ + __VA_ARGS__) + +#define REGISTER_PLL_DIV(...) _REGISTER(&rp1_register_pll_divider, \ + __VA_ARGS__) + +#define REGISTER_CLK(...) _REGISTER(&rp1_register_clock, \ + __VA_ARGS__) + +static struct rp1_clk_desc pll_sys_core_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys_core", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_pll_core_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_pll_core_data, + .cs_reg = PLL_SYS_CS, + .pwr_reg = PLL_SYS_PWR, + .fbdiv_int_reg = PLL_SYS_FBDIV_INT, + .fbdiv_frac_reg = PLL_SYS_FBDIV_FRAC, + ) +); + +static struct rp1_clk_desc pll_audio_core_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_audio_core", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_pll_core_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_pll_core_data, + .cs_reg = PLL_AUDIO_CS, + .pwr_reg = PLL_AUDIO_PWR, + .fbdiv_int_reg = PLL_AUDIO_FBDIV_INT, + .fbdiv_frac_reg = PLL_AUDIO_FBDIV_FRAC, + ) +); + +static struct rp1_clk_desc pll_video_core_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_video_core", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_pll_core_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_pll_core_data, + .cs_reg = PLL_VIDEO_CS, + .pwr_reg = PLL_VIDEO_PWR, + .fbdiv_int_reg = PLL_VIDEO_FBDIV_INT, + .fbdiv_frac_reg = PLL_VIDEO_FBDIV_FRAC, + ) +); + +static struct rp1_clk_desc pll_sys_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys", + (const struct clk_parent_data[]) { + { .hw = &pll_sys_core_desc.hw } + }, + &rp1_pll_ops, + 0 + ), + CLK_DATA(rp1_pll_data, + .ctrl_reg = PLL_SYS_PRIM, + .fc0_src = FC_NUM(0, 2), + ) +); + +static struct rp1_clk_desc pll_sys_sec_desc = REGISTER_PLL_DIV( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys_sec", + (const struct clk_parent_data[]) { + { .hw = &pll_sys_core_desc.hw } + }, + &rp1_pll_divider_ops, + 0 + ), + CLK_DATA(rp1_pll_data, + .ctrl_reg = PLL_SYS_SEC, + .fc0_src = FC_NUM(2, 2), + ) +); + +static struct rp1_clk_desc clk_eth_tsu_desc = REGISTER_CLK( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "clk_eth_tsu", + (const struct clk_parent_data[]) { { .index = 0 } }, + &rp1_clk_ops, + 0 + ), + CLK_DATA(rp1_clock_data, + .num_std_parents = 0, + .num_aux_parents = 1, + .ctrl_reg = CLK_ETH_TSU_CTRL, + .div_int_reg = CLK_ETH_TSU_DIV_INT, + .sel_reg = CLK_ETH_TSU_SEL, + .div_int_max = DIV_INT_8BIT_MAX, + .max_freq = 50 * HZ_PER_MHZ, + .fc0_src = FC_NUM(5, 7), + ) +); + +static const struct clk_parent_data clk_eth_parents[] = { + { .hw = &pll_sys_sec_desc.div.hw }, + { .hw = &pll_sys_desc.hw }, +}; + +static struct rp1_clk_desc clk_eth_desc = REGISTER_CLK( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "clk_eth", + clk_eth_parents, + &rp1_clk_ops, + 0 + ), + CLK_DATA(rp1_clock_data, + .num_std_parents = 0, + .num_aux_parents = 2, + .ctrl_reg = CLK_ETH_CTRL, + .div_int_reg = CLK_ETH_DIV_INT, + .sel_reg = CLK_ETH_SEL, + .div_int_max = DIV_INT_8BIT_MAX, + .max_freq = 125 * HZ_PER_MHZ, + .fc0_src = FC_NUM(4, 6), + ) +); + +static const struct clk_parent_data clk_sys_parents[] = { + { .index = 0 }, + { .index = -1 }, + { .hw = &pll_sys_desc.hw }, +}; + +static struct rp1_clk_desc clk_sys_desc = REGISTER_CLK( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "clk_sys", + clk_sys_parents, + &rp1_clk_ops, + CLK_IS_CRITICAL + ), + CLK_DATA(rp1_clock_data, + .num_std_parents = 3, + .num_aux_parents = 0, + .ctrl_reg = CLK_SYS_CTRL, + .div_int_reg = CLK_SYS_DIV_INT, + .sel_reg = CLK_SYS_SEL, + .div_int_max = DIV_INT_24BIT_MAX, + .max_freq = 200 * HZ_PER_MHZ, + .fc0_src = FC_NUM(0, 4), + .clk_src_mask = 0x3, + ) +); + +static struct rp1_clk_desc pll_sys_pri_ph_desc = REGISTER_PLL( + .hw.init = CLK_HW_INIT_PARENTS_DATA( + "pll_sys_pri_ph", + (const struct clk_parent_data[]) { + { .hw = &pll_sys_desc.hw } + }, + &rp1_pll_ph_ops, + 0 + ), + CLK_DATA(rp1_pll_ph_data, + .ph_reg = PLL_SYS_PRIM, + .fixed_divider = 2, + .phase = RP1_PLL_PHASE_0, + .fc0_src = FC_NUM(1, 2), + ) +); + +static struct rp1_clk_desc *const clk_desc_array[] = { + [RP1_PLL_SYS_CORE] = &pll_sys_core_desc, + [RP1_PLL_AUDIO_CORE] = &pll_audio_core_desc, + [RP1_PLL_VIDEO_CORE] = &pll_video_core_desc, + [RP1_PLL_SYS] = &pll_sys_desc, + [RP1_CLK_ETH_TSU] = &clk_eth_tsu_desc, + [RP1_CLK_ETH] = &clk_eth_desc, + [RP1_CLK_SYS] = &clk_sys_desc, + [RP1_PLL_SYS_PRI_PH] = &pll_sys_pri_ph_desc, + [RP1_PLL_SYS_SEC] = &pll_sys_sec_desc, +}; + +static const struct regmap_range rp1_reg_ranges[] = { + regmap_reg_range(PLL_SYS_CS, PLL_SYS_SEC), + regmap_reg_range(PLL_AUDIO_CS, PLL_AUDIO_TERN), + regmap_reg_range(PLL_VIDEO_CS, PLL_VIDEO_SEC), + regmap_reg_range(GPCLK_OE_CTRL, GPCLK_OE_CTRL), + regmap_reg_range(CLK_SYS_CTRL, CLK_SYS_DIV_INT), + regmap_reg_range(CLK_SYS_SEL, CLK_SYS_SEL), + regmap_reg_range(CLK_SLOW_SYS_CTRL, CLK_SLOW_SYS_DIV_INT), + regmap_reg_range(CLK_SLOW_SYS_SEL, CLK_SLOW_SYS_SEL), + regmap_reg_range(CLK_DMA_CTRL, CLK_DMA_DIV_INT), + regmap_reg_range(CLK_DMA_SEL, CLK_DMA_SEL), + regmap_reg_range(CLK_UART_CTRL, CLK_UART_DIV_INT), + regmap_reg_range(CLK_UART_SEL, CLK_UART_SEL), + regmap_reg_range(CLK_ETH_CTRL, CLK_ETH_DIV_INT), + regmap_reg_range(CLK_ETH_SEL, CLK_ETH_SEL), + regmap_reg_range(CLK_PWM0_CTRL, CLK_PWM0_SEL), + regmap_reg_range(CLK_PWM1_CTRL, CLK_PWM1_SEL), + regmap_reg_range(CLK_AUDIO_IN_CTRL, CLK_AUDIO_IN_DIV_INT), + regmap_reg_range(CLK_AUDIO_IN_SEL, CLK_AUDIO_IN_SEL), + regmap_reg_range(CLK_AUDIO_OUT_CTRL, CLK_AUDIO_OUT_DIV_INT), + regmap_reg_range(CLK_AUDIO_OUT_SEL, CLK_AUDIO_OUT_SEL), + regmap_reg_range(CLK_I2S_CTRL, CLK_I2S_DIV_INT), + regmap_reg_range(CLK_I2S_SEL, CLK_I2S_SEL), + regmap_reg_range(CLK_MIPI0_CFG_CTRL, CLK_MIPI0_CFG_DIV_INT), + regmap_reg_range(CLK_MIPI0_CFG_SEL, CLK_MIPI0_CFG_SEL), + regmap_reg_range(CLK_MIPI1_CFG_CTRL, CLK_MIPI1_CFG_DIV_INT), + regmap_reg_range(CLK_MIPI1_CFG_SEL, CLK_MIPI1_CFG_SEL), + regmap_reg_range(CLK_PCIE_AUX_CTRL, CLK_PCIE_AUX_DIV_INT), + regmap_reg_range(CLK_PCIE_AUX_SEL, CLK_PCIE_AUX_SEL), + regmap_reg_range(CLK_USBH0_MICROFRAME_CTRL, CLK_USBH0_MICROFRAME_DIV_INT), + regmap_reg_range(CLK_USBH0_MICROFRAME_SEL, CLK_USBH0_MICROFRAME_SEL), + regmap_reg_range(CLK_USBH1_MICROFRAME_CTRL, CLK_USBH1_MICROFRAME_DIV_INT), + regmap_reg_range(CLK_USBH1_MICROFRAME_SEL, CLK_USBH1_MICROFRAME_SEL), + regmap_reg_range(CLK_USBH0_SUSPEND_CTRL, CLK_USBH0_SUSPEND_DIV_INT), + regmap_reg_range(CLK_USBH0_SUSPEND_SEL, CLK_USBH0_SUSPEND_SEL), + regmap_reg_range(CLK_USBH1_SUSPEND_CTRL, CLK_USBH1_SUSPEND_DIV_INT), + regmap_reg_range(CLK_USBH1_SUSPEND_SEL, CLK_USBH1_SUSPEND_SEL), + regmap_reg_range(CLK_ETH_TSU_CTRL, CLK_ETH_TSU_DIV_INT), + regmap_reg_range(CLK_ETH_TSU_SEL, CLK_ETH_TSU_SEL), + regmap_reg_range(CLK_ADC_CTRL, CLK_ADC_DIV_INT), + regmap_reg_range(CLK_ADC_SEL, CLK_ADC_SEL), + regmap_reg_range(CLK_SDIO_TIMER_CTRL, CLK_SDIO_TIMER_DIV_INT), + regmap_reg_range(CLK_SDIO_TIMER_SEL, CLK_SDIO_TIMER_SEL), + regmap_reg_range(CLK_SDIO_ALT_SRC_CTRL, CLK_SDIO_ALT_SRC_DIV_INT), + regmap_reg_range(CLK_SDIO_ALT_SRC_SEL, CLK_SDIO_ALT_SRC_SEL), + regmap_reg_range(CLK_GP0_CTRL, CLK_GP0_SEL), + regmap_reg_range(CLK_GP1_CTRL, CLK_GP1_SEL), + regmap_reg_range(CLK_GP2_CTRL, CLK_GP2_SEL), + regmap_reg_range(CLK_GP3_CTRL, CLK_GP3_SEL), + regmap_reg_range(CLK_GP4_CTRL, CLK_GP4_SEL), + regmap_reg_range(CLK_GP5_CTRL, CLK_GP5_SEL), + regmap_reg_range(CLK_SYS_RESUS_CTRL, CLK_SYS_RESUS_CTRL), + regmap_reg_range(CLK_SLOW_SYS_RESUS_CTRL, CLK_SLOW_SYS_RESUS_CTRL), + regmap_reg_range(FC0_REF_KHZ, FC0_RESULT), + regmap_reg_range(VIDEO_CLK_VEC_CTRL, VIDEO_CLK_VEC_DIV_INT), + regmap_reg_range(VIDEO_CLK_VEC_SEL, VIDEO_CLK_DPI_DIV_INT), + regmap_reg_range(VIDEO_CLK_DPI_SEL, VIDEO_CLK_MIPI1_DPI_SEL), +}; + +static const struct regmap_access_table rp1_reg_table = { + .yes_ranges = rp1_reg_ranges, + .n_yes_ranges = ARRAY_SIZE(rp1_reg_ranges), +}; + +static const struct regmap_config rp1_clk_regmap_cfg = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, + .max_register = PLL_VIDEO_SEC, + .name = "rp1-clk", + .rd_table = &rp1_reg_table, +}; + +static int rp1_clk_probe(struct platform_device *pdev) +{ + const size_t asize = ARRAY_SIZE(clk_desc_array); + struct rp1_clk_desc *desc; + struct device *dev = &pdev->dev; + struct rp1_clockman *clockman; + struct clk_hw **hws; + unsigned int i; + + clockman = devm_kzalloc(dev, struct_size(clockman, onecell.hws, asize), + GFP_KERNEL); + if (!clockman) + return -ENOMEM; + + spin_lock_init(&clockman->regs_lock); + clockman->dev = dev; + + clockman->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(clockman->regs)) + return PTR_ERR(clockman->regs); + + clockman->regmap = devm_regmap_init_mmio(dev, clockman->regs, + &rp1_clk_regmap_cfg); + if (IS_ERR(clockman->regmap)) { + dev_err_probe(dev, PTR_ERR(clockman->regmap), + "could not init clock regmap\n"); + return PTR_ERR(clockman->regmap); + } + + clockman->onecell.num = asize; + hws = clockman->onecell.hws; + + for (i = 0; i < asize; i++) { + desc = clk_desc_array[i]; + if (desc && desc->clk_register && desc->data) { + hws[i] = desc->clk_register(clockman, desc); + if (IS_ERR_OR_NULL(hws[i])) + dev_err_probe(dev, PTR_ERR(hws[i]), + "Unable to register clock: %s\n", + clk_hw_get_name(hws[i])); + } + } + + platform_set_drvdata(pdev, clockman); + + return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, + &clockman->onecell); +} + +static const struct of_device_id rp1_clk_of_match[] = { + { .compatible = "raspberrypi,rp1-clocks" }, + {} +}; +MODULE_DEVICE_TABLE(of, rp1_clk_of_match); + +static struct platform_driver rp1_clk_driver = { + .driver = { + .name = "rp1-clk", + .of_match_table = rp1_clk_of_match, + }, + .probe = rp1_clk_probe, +}; + +module_platform_driver(rp1_clk_driver); + +MODULE_AUTHOR("Naushir Patuck "); +MODULE_AUTHOR("Andrea della Porta "); +MODULE_DESCRIPTION("RP1 clock driver"); +MODULE_LICENSE("GPL"); From patchwork Mon Jan 13 14:58:08 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrea della Porta X-Patchwork-Id: 857054 Received: from mail-ed1-f54.google.com (mail-ed1-f54.google.com [209.85.208.54]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B86C023A10E for ; Mon, 13 Jan 2025 14:57:34 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.54 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780260; cv=none; b=qzxpCO6E7qViipn9fimYEakkvgByadN163WEh6oGPwy8Duwda9pjqvtuD9vWH61aST2XyX0cJjM2sZDTPAlTjOCHrUbW26lkfz0dHmCXX2mfVL87CRRAJtunyFRvfhPdWiC1W8pZ/xVSS164r/q0PfQAxRMB/YAorvolFmYTK+8= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780260; c=relaxed/simple; bh=5wKv3990qTqArMWxDC8JoNsA96O0HLgsLUAOsCHU91I=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=SODFr9+oxRcvIseDk9a5yBt29aSiCrYIle4cxmqUg99XKFiepNi5ecfwednpZUWWW4IXOL8M1k7TyWWdG9WSrGVVbgekry6xDBrhYuMD2M49smqwK+i7u/n1HFgRbG3v9d96ZR+U7FsQEcilFcJsLgWfXhACVvXYgeyc1+O+PYs= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com; spf=pass smtp.mailfrom=suse.com; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b=CkmuRw2X; arc=none smtp.client-ip=209.85.208.54 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=suse.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b="CkmuRw2X" Received: by mail-ed1-f54.google.com with SMTP id 4fb4d7f45d1cf-5d0ac27b412so5800915a12.1 for ; Mon, 13 Jan 2025 06:57:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.com; s=google; t=1736780253; x=1737385053; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=P/DXYP0gmkoHCujxUnsFn55701rZVWVknkTyMB7ADmU=; b=CkmuRw2XzMLlZwjZ9zGu9CZpuML8FdnKHajbeX1llmFmbJbKUZ8TVsEVJrMK4nZImb yRIX1015ZGzAHhL0ZN2tHpEapGmJ6hsVXnoKLPuuwh1GNIJHMCRqRK0Rme3S/zJK4+5G Hm9hbkRrMd3NDPvbPb7VJl+XUOexrJKyXDWr9nl2jXesVMb18BOqoUWlw08B53yFryji 86McpYfc+x5/7+GkuJT0oGOnIaX+sy/xp7z3lR2POj7a4WukFOAaJ4kqJz1ESX9hNUnr r6ld/DRXMLknQyT1a5qpKc8STXo/Nmf/eOE1yyZmUA9kuFwACOYC0Ltj/2viGjLx0OU5 ZWkQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1736780253; x=1737385053; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=P/DXYP0gmkoHCujxUnsFn55701rZVWVknkTyMB7ADmU=; b=mLYFzNYld9pMdxcLoPlZF86SuhnBvpcYPNJAZGtlr5GbY2Rfto/8fiI1VZglK1JW8S MmSam7VffWhAcp0AxQCk1ElrgMnrm2w7SYUxwMf7MFtOrErjIAhAWyfBMsY1qQnyh+fe YscFBRu5rafIm0D7ZLFkUT3kRcITFMiVU2zyRuMuTHIXg9DirrW+IpMAruLvkHnBYkTV LJzKSP75L2ubGLMYchwTYdou1SnKlQx1NbJSOpN3dMuRaqdJO7SME3Zvtm/I8MwZJxM9 YPneMxJXr0IFBTISjHTg1xIfKlQHwXZ6M0woDtIkgxgp2KVLolNVFvm4hZ1/paE1PLiV 196w== X-Forwarded-Encrypted: i=1; AJvYcCW7LklGZp4ev+ZRYFhuAAWkkrUhGMtUT5xo+qp9kEwrXN85stg7vOsfibwUPwqAFQrHMVsKqq2Bxmti@vger.kernel.org X-Gm-Message-State: AOJu0YweExvbvL/tjOWrr+lR8J4d4QNxWmjx5/EkWh3W9yyb43Jja1YK qHwaNDPs3KQbENYCnUmJQRHndLMCpZe2oImNTXY2m64TLkwfyDaw4hJG2KPRL1gem31CscpBNiA 6XmI= X-Gm-Gg: ASbGncs08U51vaV1jJPO9yggMIY4WdrqzghAHFFiFcAPktmJk/Jc7IWyw7kYkafD9bQ 9/gERx13jHsdJp8Ag0i5lQLoVjFa+Tvl1/KBYUGFWLgYu9xv/V0J4jCLOlxcIjEhC90plnK609z 0tAz3ypyx2uTqTvJnMNZhr7trD/4mE7QWPneKdCUrkN1qVyRLSWxxHMAD75dtJKxr4vl1Qv0XIh JJh8AYPiG8NZa91vmYZ9r3BmAnOE/zX7hn4oVdZDBubIzXZfmc3rhCkqmVnUBqo7yw6wpmRqr/4 z8TaL5RjGFKmJNIcxcDhCeTuDYc= X-Google-Smtp-Source: AGHT+IFIxrNKB7bGJmJiodj5rOVrMgbeQ6c2Dm+g2BvJJIffbh6/B3xYKNDCOnj1PjUeZNJ5q9pnWw== X-Received: by 2002:a05:6402:40d5:b0:5d9:f21e:ff5 with SMTP id 4fb4d7f45d1cf-5d9f21e18a0mr256894a12.16.1736780252625; Mon, 13 Jan 2025 06:57:32 -0800 (PST) Received: from localhost (host-87-14-236-197.retail.telecomitalia.it. [87.14.236.197]) by smtp.gmail.com with ESMTPSA id 4fb4d7f45d1cf-5d99046a07bsm5052479a12.65.2025.01.13.06.57.32 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Jan 2025 06:57:32 -0800 (PST) From: Andrea della Porta To: Andrea della Porta , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Florian Fainelli , Broadcom internal kernel review list , Lorenzo Pieralisi , Krzysztof Wilczynski , Manivannan Sadhasivam , Bjorn Helgaas , Linus Walleij , Catalin Marinas , Will Deacon , Bartosz Golaszewski , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Saravana Kannan , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, linux-gpio@vger.kernel.org, Masahiro Yamada , Stefan Wahren , Herve Codina , Luca Ceresoli , Thomas Petazzoni , Andrew Lunn Subject: [PATCH v6 09/10] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5 Date: Mon, 13 Jan 2025 15:58:08 +0100 Message-ID: X-Mailer: git-send-email 2.44.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The RP1 found on Raspberry Pi 5 board needs an external crystal at 50MHz. Add clk_rp1_xosc node to provide that. Signed-off-by: Andrea della Porta --- arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts index 2bdbb6780242..ae3c0c153cea 100644 --- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts +++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts @@ -16,6 +16,13 @@ chosen: chosen { stdout-path = "serial10:115200n8"; }; + clk_rp1_xosc: clock-50000000 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "rp1-xosc"; + clock-frequency = <50000000>; + }; + /* Will be filled by the bootloader */ memory@0 { device_type = "memory"; From patchwork Mon Jan 13 14:58:09 2025 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrea della Porta X-Patchwork-Id: 857053 Received: from mail-ej1-f42.google.com (mail-ej1-f42.google.com [209.85.218.42]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 8B01A23A11D for ; Mon, 13 Jan 2025 14:57:36 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.42 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780260; cv=none; b=qmtJTx3q0R1eoDiywUzn+9MN3GNqc/Egb7fDtPEHH6NPCf3VVqIt6bk2XfZGRFJdDaDPEOZIqx1KnpNc6eOnWpsidqloAVbMQEoLUvPYlyBVET48QiEFH4eeRKB8jJ4vBT1S3QGMFGL/Y41+GS1WPeoZWWPEaqOrxjvAeZvODMk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1736780260; c=relaxed/simple; bh=QMBFXNqBpFgYP2yitTOgzdsfZItshvzAST6FqjQRjNM=; h=From:To:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=iv+KBpcoOgRqx6UUP/7O6X4hfQ66ojMU85UFwKhp+V3u1j6Hzf8Tf3oI7OMyHWZNveaor8Hqh5I/bt/P8LN/9Z7k30KnCUADKwOliSKWfcQ77gjdCw2VvypTQRdEES9mLLW/SOH+Vydldb33M3GUJCoxmKPNB9pDB6R9ic+lHPg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com; spf=pass smtp.mailfrom=suse.com; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b=LN1f6hUk; arc=none smtp.client-ip=209.85.218.42 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=suse.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=suse.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=suse.com header.i=@suse.com header.b="LN1f6hUk" Received: by mail-ej1-f42.google.com with SMTP id a640c23a62f3a-aaeec07b705so714515166b.2 for ; Mon, 13 Jan 2025 06:57:36 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=suse.com; s=google; t=1736780253; x=1737385053; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=+dNlxUlq/zQec54ENuov38IuayLoY+NtEDaFnmM1inQ=; b=LN1f6hUk1ZwF41hlKguv5VymijYl8T6LFbmIU2a65XPQRamtQITn19vWMu/Ius+4CR ODjHL/ubeWnT+ElvY9r15KxXmQLzyCzgdmQPTpTmDF4cd/H2jO7zLWtfpgjVlpr+QML5 AJdQBEIvMq2FCIifmt6f6jgAFrF7fKWj0vdYs06AtMkxiNm6xfKGm+5zi2nHistvxkCE zLAEnXhgNpbRK3Kg7rJvGa8zg1qG8wdfJzTiF4GYY7ps6KUc3lSjRRgd+DjaskFh3Te/ 1DBAxCg8UtIW7OG0opGw4hPkkv577CLfACNibbwchf3dsuDVnn/yRz7uLPm394mrmbZD YB9Q== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1736780253; x=1737385053; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=+dNlxUlq/zQec54ENuov38IuayLoY+NtEDaFnmM1inQ=; b=vFn7V3fgou8F0vTdkvUAz7OoqVm1RuFIJB3qsp2CauF7+2tNoh6VoNKTWH7hgU1UZi 7lZo/Bv6j99BT7tct6aM9pmUthrrQ8OzrtdeHKFdSyqKqTTugQJOMQasVIwi+bHs9DN7 1znkcaFyUtLMSHM/wBOMum2erV/Qn/R8wMH8tM7ZDOsj7pQcatDNXWmFLLPBT/6H4YK8 Xtyy/Nu1WTGo2gzO9+Hufi7jCQIS4m2B963UssBdNSGhPNjuAxX7b+FYiVlenlhTHKKo AoUj+iuWz9L8nN55/nIOl0HnjsDGtixJF1QfPkCC6jonzkH/f9MPoYnqUf5A7rcfKQCG S5zA== X-Forwarded-Encrypted: i=1; AJvYcCUly7poUnvzdLI0qwjHrzMq+1RwuqOcqEVsCow4adQrYFbvhRnwx7wWh3Q80+2u6tDGRNQlistkG8tj@vger.kernel.org X-Gm-Message-State: AOJu0Yx7cIhHbKjxYgkOwfSlobeujHP7qejqFod439Fp7BnJBauRgGaR jLnqo393IIfZgx5NMLOva3YL0CePB9DR+wLk8+UPqfnzAOMkxyoAOEax7LVHMbI= X-Gm-Gg: ASbGnctuy9wkhcubxl/jrbDH8FojvgRpyivu+lGheD0At1nuYDksYAPHI73DWmWWUTc VPrcrAqe51l/MAdf66ngA0CRntjXtcxqosI+kCtpWKcKTTL6v/sOF13cLQ2yIRQ61WFJn9aKVTA lcNOiIA+5NrgxPWSTzt2eIoIHHuaMi20GLGi5KY2h2512ZWzQrYo1cBy2QppUMXVHNBbYqR+CPh 7YYofE47+pTrhsCbkuyH2Aik+sHpL4MHoTSI8sDK0CKlMN8Vl3CPlIAjezinHiMkggrC1PTBauI dVchhd5XU7GX+tKvlSAw2elAJxc= X-Google-Smtp-Source: AGHT+IGT7ZUyRqjYZDfn2augtPO24Nq1KfGdCS+zaijGp4OI6jVXn2a8avrfPMk2uXfMIqlZpqSwuQ== X-Received: by 2002:a17:907:6d29:b0:ab2:f8e9:5f57 with SMTP id a640c23a62f3a-ab2f8e9652bmr767188466b.21.1736780253509; Mon, 13 Jan 2025 06:57:33 -0800 (PST) Received: from localhost (host-87-14-236-197.retail.telecomitalia.it. [87.14.236.197]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-ab2c96475besm506777166b.180.2025.01.13.06.57.33 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 13 Jan 2025 06:57:33 -0800 (PST) From: Andrea della Porta To: Andrea della Porta , Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Florian Fainelli , Broadcom internal kernel review list , Lorenzo Pieralisi , Krzysztof Wilczynski , Manivannan Sadhasivam , Bjorn Helgaas , Linus Walleij , Catalin Marinas , Will Deacon , Bartosz Golaszewski , Derek Kiernan , Dragan Cvetic , Arnd Bergmann , Greg Kroah-Hartman , Saravana Kannan , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org, linux-gpio@vger.kernel.org, Masahiro Yamada , Stefan Wahren , Herve Codina , Luca Ceresoli , Thomas Petazzoni , Andrew Lunn Subject: [PATCH v6 10/10] arm64: defconfig: Enable RP1 misc/clock/gpio drivers Date: Mon, 13 Jan 2025 15:58:09 +0100 Message-ID: <325cb9d9956344fad68c137b99a9c92bcd707481.1736776658.git.andrea.porta@suse.com> X-Mailer: git-send-email 2.44.0 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-gpio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Select the RP1 drivers needed to operate the PCI endpoint containing several peripherals such as Ethernet and USB Controller. This chip is present on RaspberryPi 5. Signed-off-by: Andrea della Porta Reviewed-by: Stefan Wahren --- arch/arm64/configs/defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index c62831e61586..91b39026dc56 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -609,6 +609,7 @@ CONFIG_PINCTRL_QCM2290=y CONFIG_PINCTRL_QCS404=y CONFIG_PINCTRL_QDF2XXX=y CONFIG_PINCTRL_QDU1000=y +CONFIG_PINCTRL_RP1=m CONFIG_PINCTRL_SA8775P=y CONFIG_PINCTRL_SC7180=y CONFIG_PINCTRL_SC7280=y @@ -690,6 +691,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m +CONFIG_MISC_RP1=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y @@ -1272,6 +1274,7 @@ CONFIG_COMMON_CLK_CS2000_CP=y CONFIG_COMMON_CLK_FSL_SAI=y CONFIG_COMMON_CLK_S2MPS11=y CONFIG_COMMON_CLK_PWM=y +CONFIG_COMMON_CLK_RP1=m CONFIG_COMMON_CLK_RS9_PCIE=y CONFIG_COMMON_CLK_VC3=y CONFIG_COMMON_CLK_VC5=y