From patchwork Thu Sep 5 18:52:25 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 826124 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D053D1A42CF; Thu, 5 Sep 2024 18:52:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562375; cv=none; b=T9S6TjeR6SemFQ7/2qXNDkVt7ZPryBslWXEhBf68qrmID3x0JvZ5gwi1Tt605zZq+WHhPD0Apwj7VLA5MY+5Rrczu5vTr/8bUYg+j7W0XF+HAfqxtBNPGbZFcc9VpkPi9gWOXWUWvxQROAWjUoK0EnSYUML4q/hNaSPivdTr7AE= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562375; c=relaxed/simple; bh=F1F3xjofxTwzvwU+XNLOYef8SiHd35nW1uqksCGJicQ=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=qFDYq44nzPPff7eGJNrr/ou+uX8MLK4wn3p9cKrFXrgOuNVcFBJBCo1JtI9RbAUqTfEfjAvyA6ZenOKwQzJqH4Wazf4qSwyc7IyiFfBsDfwxFQ7v6yfxu/lq/x49xPy5LqYScXDzSjNs8E9WqV0hAW4DIHB9dScuz0qMlJjV6rI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=MafLyMVK; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="MafLyMVK" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=EBMUNEsgg3HNHWKY+I4PZ0QO6FHi+iK8X6AqrZyqPbo=; b=MafLyMVKQPzVlTRwKI9hWGEGJy ipJaNMmahZM9kb4bry+d6315QlbuUSD3hGlkr3m9T2eJAKAZeXSLufi+aFpMjZIAQymKE4UnxwJHw jdAFvtLfLvhe79o/cOk3ngehe9RWW4KdB8HnUKFWnaCv65663y05gk9Q1uVjF7+NII2I1Nwg7p3zV W4sNNhKJhFMsQ21pmODmaJ5FdO85UaBUN0q0swZIxx1/vVq/nLulVB2aw4nyBOBaIlGTjDblCxS2g w0CpX36Ly3sQF7YqTvN7mfDypn/bQmKj8ku8WrpZZa8loGsh5HqvgCaNh1wDN8x4xjbcz9w1VshhF RKRO9eBQ==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHaw-0003sR-L9; Thu, 05 Sep 2024 20:52:38 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [PATCH v7 1/8] mfd: core: make platform_data pointer const in struct mfd_cell Date: Thu, 5 Sep 2024 20:52:25 +0200 Message-ID: <20240905185232.2899464-2-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The content of the platform_data of a struct mfd_cell is simply passed on to the platform_device_add_data() call in mfd_add_device() . platform_device_add_data() already handles the data behind that pointer as const, so there is no reason to not extend this to struct mfd_cell. This allows to pass structs gathered from of_device_get_match_data() as platform-data to sub-devices - which is retrieved as const already. Signed-off-by: Heiko Stuebner --- include/linux/mfd/core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index e8bcad641d8c..faeea7abd688 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -72,7 +72,7 @@ struct mfd_cell { int (*resume)(struct platform_device *dev); /* platform data passed to the sub devices drivers */ - void *platform_data; + const void *platform_data; size_t pdata_size; /* Matches ACPI */ From patchwork Thu Sep 5 18:52:26 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 826125 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id F27D919DFAE; Thu, 5 Sep 2024 18:52:51 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562373; cv=none; b=ovGiOP8q8Uay2hPpcSZ4fHCk3OT1DC9pN+O1DiTp2Bjdfue1KtPLmKZDyRu3xPU/B9w46J+3KRwlxO1w8zN0FiyM5WMl1+lnsCVjGGjYMAqvcClbbu7xjEZKJ/AyCSVWU8OE8DxfJagPM8FCZpH6e8/CgonbLefpI7eeaFssdcA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562373; c=relaxed/simple; bh=iqySBVgrCYk4SEf5Smqb0R4Fqpk7CWOcEPykIQqXkH4=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=kBlPuinSC9d6Gjs5YMeBiB2GRx+d3pdO6p2MirzwUox3+mnb5l4JgvMEASTQAqLmFewjv/wuezfpZg/pJO1bx6tPINAG1XeLlXz7FYBhV8wPOv+anNsSuEtATfRlRRPghaPl+UpmeY3Hbgi7vvLnPVfaP0UmGr3VadHPm487K/U= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=g27V/o59; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="g27V/o59" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=bN6g5LuUOiaBgVx2RDzw9SfT+Ft8rUzg+cw1TiUo10A=; b=g27V/o59LNxWoNbaCSB6thYih5 l2oEdnCb/MzcowtwFYnPlmmx/GG/kINEuib6nUQQTg9VDBWFV84OdCWdBpsflYCjtFVZMfsRLIvGk JmQPlJ8QMOpgJq/RRlZhqBujlfv4g8G+9yVNtANV4APPQxw3IRlrgo59/UgjXsf0yZIAJVCou3D1E jSqIyPK5DCrP10K1omTfVYj/fD20UtOXhAw3yHWteS+byO+d2hrtlTXmwGJTdOr/3B7Y2CVZjmLjk KfaT4jiRRAOVROCG90WHyLv0SJxrsxAp2Ti80UP4+23JwHGts5M8J18ZOF5NASVJd8BTK4+U++B+R XYczvFnA==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHax-0003sR-C6; Thu, 05 Sep 2024 20:52:39 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org, Conor Dooley Subject: [PATCH v7 2/8] dt-bindings: mfd: add binding for qnap,ts433-mcu devices Date: Thu, 5 Sep 2024 20:52:26 +0200 Message-ID: <20240905185232.2899464-3-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 These MCUs can be found in network attached storage devices made by QNAP. They are connected to a serial port of the host device and provide functionality like LEDs, power-control and temperature monitoring. LEDs, buttons, etc are all elements of the MCU firmware itself, so don't need devicetree input, though the fan gets its cooling settings from a fan-0 subnode. A binding for the LEDs for setting the linux-default-trigger may come later, once all the LEDs are understood and ATA controllers actually can address individual port-LEDs, but are really optional. Reviewed-by: Conor Dooley Signed-off-by: Heiko Stuebner --- .../bindings/mfd/qnap,ts433-mcu.yaml | 42 +++++++++++++++++++ 1 file changed, 42 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml diff --git a/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml new file mode 100644 index 000000000000..877078ac172f --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/qnap,ts433-mcu.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/qnap,ts433-mcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: QNAP NAS on-board Microcontroller + +maintainers: + - Heiko Stuebner + +description: + QNAP embeds a microcontroller on their NAS devices adding system feature + as PWM Fan control, additional LEDs, power button status and more. + +properties: + compatible: + enum: + - qnap,ts433-mcu + +patternProperties: + "^fan-[0-9]+$": + $ref: /schemas/hwmon/fan-common.yaml# + unevaluatedProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + uart { + mcu { + compatible = "qnap,ts433-mcu"; + + fan-0 { + #cooling-cells = <2>; + cooling-levels = <0 64 89 128 166 204 221 238>; + }; + }; + }; From patchwork Thu Sep 5 18:52:27 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 825739 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id EDCC11A705C; Thu, 5 Sep 2024 18:52:54 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562378; cv=none; b=LIWhrBm480Ru+NWG9VatdrnH0W6waS2mINS2g8pLBcHIRtCsUHXpUBNa/DwEjNVdGfQ6VHdPBPculv54vsCfvCcP6niOyp3ydlGDfUM2/d59twyzcWWUar5BYD6gvjdDSxpwy2vC7Oi/ff9MG9bWj/J2TcINB5/2jZvQXfXVago= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562378; c=relaxed/simple; bh=l4fiGqj3J2ji6yhjDdfwMWjMPOZ109OD87oals4+c0M=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=XIQNWT+H0AqXRi/wMuH8qUn+GutqPqoJlE5nteCrPnK1ZSVZGFDUbpx0Prie3Zds8ssp3uXbN3vipazaNTIYlxffbQeyRjNdNcdoXjo2oP3J1BL/kBIs0sgcQrek4THeSu861IZORqeDWs6gMiUM+095qwY0lc7x59aQVAG9DcU= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=Df1tHY93; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="Df1tHY93" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=AxdVtceVwDy2HngcUrmC+DNm+kkD+FUKAg5KNMlJKC8=; b=Df1tHY93twnUUi6usHRy6KcPbI /GFKE3kM+5avIhZIYr7IaZCeUfMAKT7Iig+J0x0OF72FKniHhYKIqOPMRMqHv7KSGxP9lCqZPIsLR Pe9vHXk94Ma+L5TRK97FH3c19RlTeNCUJsaOT4HOss0UnEx5N8Ee7tIAU9j0eA615d6W8jGOS+tm2 nvCNJ/H09Io5uh/noXiCmDw+Y+mdqor5tgbBtcxex1keLjQGaP39xq7drUPCRtRf13RgvRxFEVX/T sdutL2hwcmZyEIJdjNbKKiIi6pqXVqI03KveDXq6MBubDc96GnPE4EE9EOrnJVDHGtQqFL5Xwas5X LZn6X1FA==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHay-0003sR-2W; Thu, 05 Sep 2024 20:52:40 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [PATCH v7 3/8] mfd: add base driver for qnap-mcu devices Date: Thu, 5 Sep 2024 20:52:27 +0200 Message-ID: <20240905185232.2899464-4-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 These microcontroller units are used in network-attached-storage devices made by QNAP and provide additional functionality to the system. This adds the base driver that implements the serial protocol via serdev and additionally hooks into the poweroff handlers to turn off the parts of the system not supplied by the general PMIC. Turning off (at least the TSx33 devices using Rockchip SoCs) consists of two separate actions. Turning off the MCU alone does not turn off the main SoC and turning off only the SoC/PMIC does not turn off the hard-drives. Also if the MCU is not turned off, the system also won't start again until it is unplugged from power. So on shutdown the MCU needs to be turned off separately before the main PMIC. The protocol spoken by the MCU is sadly not documented, but was obtained by listening to the chatter on the serial port, as thankfully the "hal_app" program from QNAPs firmware allows triggering all/most MCU actions from the command line. The implementation of how to talk to the serial device got some inspiration from the rave-sp servdev driver. Signed-off-by: Heiko Stuebner --- MAINTAINERS | 6 + drivers/mfd/Kconfig | 13 ++ drivers/mfd/Makefile | 2 + drivers/mfd/qnap-mcu.c | 332 +++++++++++++++++++++++++++++++++++ include/linux/mfd/qnap-mcu.h | 26 +++ 5 files changed, 379 insertions(+) create mode 100644 drivers/mfd/qnap-mcu.c create mode 100644 include/linux/mfd/qnap-mcu.h diff --git a/MAINTAINERS b/MAINTAINERS index 7889addb8949..ee6e98ba2e6f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18679,6 +18679,12 @@ L: linux-media@vger.kernel.org S: Odd Fixes F: drivers/media/tuners/qm1d1c0042* +QNAP MCU DRIVER +M: Heiko Stuebner +S: Maintained +F: drivers/mfd/qnap-mcu.c +F: include/linux/qnap-mcu.h + QNX4 FILESYSTEM M: Anders Larsen S: Maintained diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index bc8be2e593b6..63d51cc45891 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2362,6 +2362,19 @@ config MFD_INTEL_M10_BMC_PMCI additional drivers must be enabled in order to use the functionality of the device. +config MFD_QNAP_MCU + tristate "QNAP microcontroller unit core driver" + depends on SERIAL_DEV_BUS + select MFD_CORE + help + Select this to get support for the QNAP MCU device found in + several devices of QNAP network attached storage products that + implements additional functionality for the device, like fan + and LED control. + + This driver implements the base serial protocol to talk to the + device and provides functions for the other parts to hook into. + config MFD_RSMU_I2C tristate "Renesas Synchronization Management Unit with I2C" depends on I2C && OF diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 02b651cd7535..fc8b825725ff 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -286,5 +286,7 @@ obj-$(CONFIG_MFD_INTEL_M10_BMC_PMCI) += intel-m10-bmc-pmci.o obj-$(CONFIG_MFD_ATC260X) += atc260x-core.o obj-$(CONFIG_MFD_ATC260X_I2C) += atc260x-i2c.o +obj-$(CONFIG_MFD_QNAP_MCU) += qnap-mcu.o + obj-$(CONFIG_MFD_RSMU_I2C) += rsmu_i2c.o rsmu_core.o obj-$(CONFIG_MFD_RSMU_SPI) += rsmu_spi.o rsmu_core.o diff --git a/drivers/mfd/qnap-mcu.c b/drivers/mfd/qnap-mcu.c new file mode 100644 index 000000000000..2a52ac01f5fc --- /dev/null +++ b/drivers/mfd/qnap-mcu.c @@ -0,0 +1,332 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Core driver for the microcontroller unit in QNAP NAS devices that is + * connected via a dedicated UART port. + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* The longest command found so far is 5 bytes long */ +#define QNAP_MCU_MAX_CMD_SIZE 5 +#define QNAP_MCU_MAX_DATA_SIZE 36 +#define QNAP_MCU_CHECKSUM_SIZE 1 + +#define QNAP_MCU_RX_BUFFER_SIZE \ + (QNAP_MCU_MAX_DATA_SIZE + QNAP_MCU_CHECKSUM_SIZE) + +#define QNAP_MCU_TX_BUFFER_SIZE \ + (QNAP_MCU_MAX_CMD_SIZE + QNAP_MCU_CHECKSUM_SIZE) + +#define QNAP_MCU_ACK_LEN 2 +#define QNAP_MCU_VERSION_LEN 4 + +/** + * struct qnap_mcu_reply - Reply to a command + * + * @data: Buffer to store reply payload in + * @length: Expected reply length, including the checksum + * @received: Received number of bytes, so far + * @done: Triggered when the entire reply has been received + */ +struct qnap_mcu_reply { + u8 *data; + size_t length; + size_t received; + struct completion done; +}; + +/** + * struct qnap_mcu - QNAP NAS embedded controller + * + * @serdev: Pointer to underlying serdev + * @bus_lock: Lock to serialize access to the device + * @reply: Reply data structure + * @variant: Device variant specific information + * @version: MCU firmware version + */ +struct qnap_mcu { + struct serdev_device *serdev; + struct mutex bus_lock; + struct qnap_mcu_reply reply; + const struct qnap_mcu_variant *variant; + u8 version[QNAP_MCU_VERSION_LEN]; +}; + +/* + * The QNAP-MCU uses a basic XOR checksum. + * It is always the last byte and XORs the whole previous message. + */ +static u8 qnap_mcu_csum(const u8 *buf, size_t size) +{ + u8 csum = 0; + + while (size--) + csum ^= *buf++; + + return csum; +} + +static int qnap_mcu_write(struct qnap_mcu *mcu, const u8 *data, u8 data_size) +{ + unsigned char tx[QNAP_MCU_TX_BUFFER_SIZE]; + size_t length = data_size + QNAP_MCU_CHECKSUM_SIZE; + + if (length > sizeof(tx)) { + dev_err(&mcu->serdev->dev, "data too big for transmit buffer"); + return -EINVAL; + } + + memcpy(tx, data, data_size); + tx[data_size] = qnap_mcu_csum(data, data_size); + + return serdev_device_write(mcu->serdev, tx, length, HZ); +} + +static size_t qnap_mcu_receive_buf(struct serdev_device *serdev, const u8 *buf, size_t size) +{ + struct device *dev = &serdev->dev; + struct qnap_mcu *mcu = dev_get_drvdata(dev); + struct qnap_mcu_reply *reply = &mcu->reply; + const u8 *src = buf; + const u8 *end = buf + size; + + if (!reply->length) { + dev_warn(dev, "Received %zu bytes, we were not waiting for\n", size); + return size; + } + + while (src < end) { + reply->data[reply->received] = *src++; + reply->received++; + + if (reply->received == reply->length) { + complete(&reply->done); + + /* + * We report the consumed number of bytes. If there + * are still bytes remaining (though there shouldn't) + * the serdev layer will re-execute this handler with + * the remainder of the Rx bytes. + */ + return src - buf; + } + } + + /* + * The only way to get out of the above loop and end up here + * is through consuming all of the supplied data, so here we + * report that we processed it all. + */ + return size; +} + +static const struct serdev_device_ops qnap_mcu_serdev_device_ops = { + .receive_buf = qnap_mcu_receive_buf, + .write_wakeup = serdev_device_write_wakeup, +}; + +int qnap_mcu_exec(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size, + u8 *reply_data, size_t reply_data_size) +{ + unsigned char rx[QNAP_MCU_RX_BUFFER_SIZE]; + size_t length = reply_data_size + QNAP_MCU_CHECKSUM_SIZE; + struct qnap_mcu_reply *reply = &mcu->reply; + int ret = 0; + + if (length > sizeof(rx)) { + dev_err(&mcu->serdev->dev, "expected data too big for receive buffer"); + return -EINVAL; + } + + mutex_lock(&mcu->bus_lock); + + reply->data = rx, + reply->length = length, + reply->received = 0, + reinit_completion(&reply->done); + + qnap_mcu_write(mcu, cmd_data, cmd_data_size); + + if (!wait_for_completion_timeout(&reply->done, msecs_to_jiffies(500))) { + dev_err(&mcu->serdev->dev, "Command timeout\n"); + ret = -ETIMEDOUT; + } else { + u8 crc = qnap_mcu_csum(rx, reply_data_size); + + if (crc != rx[reply_data_size]) { + dev_err(&mcu->serdev->dev, + "Invalid Checksum received\n"); + ret = -EIO; + } else { + memcpy(reply_data, rx, reply_data_size); + } + } + + /* We don't expect any characters from the device now */ + reply->length = 0; + + mutex_unlock(&mcu->bus_lock); + return ret; +} +EXPORT_SYMBOL_GPL(qnap_mcu_exec); + +int qnap_mcu_exec_with_ack(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size) +{ + u8 ack[QNAP_MCU_ACK_LEN]; + int ret; + + ret = qnap_mcu_exec(mcu, cmd_data, cmd_data_size, ack, sizeof(ack)); + if (ret) + return ret; + + /* Should return @0 */ + if (ack[0] != 0x40 || ack[1] != 0x30) { + dev_err(&mcu->serdev->dev, "Did not receive ack\n"); + return -EIO; + } + + return 0; +} +EXPORT_SYMBOL_GPL(qnap_mcu_exec_with_ack); + +static int qnap_mcu_get_version(struct qnap_mcu *mcu) +{ + const u8 cmd[] = { '%', 'V' }; + u8 rx[14]; + int ret; + + /* Reply is the 2 command-bytes + 4 bytes describing the version */ + ret = qnap_mcu_exec(mcu, cmd, sizeof(cmd), rx, QNAP_MCU_VERSION_LEN + 2); + if (ret) + return ret; + + memcpy(mcu->version, &rx[2], QNAP_MCU_VERSION_LEN); + + return 0; +} + +/* + * The MCU controls power to the peripherals but not the CPU. + * + * So using the PMIC to power off the system keeps the MCU and hard-drives + * running. This also then prevents the system from turning back on until + * the MCU is turned off by unplugging the power cable. + * Turning off the MCU alone on the other hand turns off the hard drives, + * LEDs, etc while the main SoC stays running - including its network ports. + */ +static int qnap_mcu_power_off(struct sys_off_data *data) +{ + const u8 cmd[] = { '@', 'C', '0' }; + struct qnap_mcu *mcu = data->cb_data; + int ret; + + ret = qnap_mcu_exec_with_ack(mcu, cmd, sizeof(cmd)); + if (ret) { + dev_err(&mcu->serdev->dev, "MCU poweroff failed %d\n", ret); + return NOTIFY_STOP; + } + + return NOTIFY_DONE; +} + +static const struct qnap_mcu_variant qnap_ts433_mcu = { + .baud_rate = 115200, + .num_drives = 4, + .fan_pwm_min = 51, /* Specified in original model.conf */ + .fan_pwm_max = 255, + .usb_led = true, +}; + +static struct mfd_cell qnap_mcu_cells[] = { + { .name = "qnap-mcu-input", }, + { .name = "qnap-mcu-leds", }, + { .name = "qnap-mcu-hwmon", } +}; + +static int qnap_mcu_probe(struct serdev_device *serdev) +{ + struct device *dev = &serdev->dev; + struct qnap_mcu *mcu; + int ret; + + mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL); + if (!mcu) + return -ENOMEM; + + mcu->serdev = serdev; + dev_set_drvdata(dev, mcu); + + mcu->variant = of_device_get_match_data(dev); + if (!mcu->variant) + return -ENODEV; + + mutex_init(&mcu->bus_lock); + init_completion(&mcu->reply.done); + + serdev_device_set_client_ops(serdev, &qnap_mcu_serdev_device_ops); + ret = devm_serdev_device_open(dev, serdev); + if (ret) + return ret; + + serdev_device_set_baudrate(serdev, mcu->variant->baud_rate); + serdev_device_set_flow_control(serdev, false); + + ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE); + if (ret) + return dev_err_probe(dev, ret, "Failed to set parity\n"); + + ret = qnap_mcu_get_version(mcu); + if (ret) + return ret; + + ret = devm_register_sys_off_handler(dev, + SYS_OFF_MODE_POWER_OFF_PREPARE, + SYS_OFF_PRIO_DEFAULT, + &qnap_mcu_power_off, mcu); + if (ret) + return dev_err_probe(dev, ret, + "Failed to register poweroff handler\n"); + + for (int i = 0; i < ARRAY_SIZE(qnap_mcu_cells); i++) { + qnap_mcu_cells[i].platform_data = mcu->variant; + qnap_mcu_cells[i].pdata_size = sizeof(*mcu->variant); + } + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, qnap_mcu_cells, + ARRAY_SIZE(qnap_mcu_cells), NULL, 0, NULL); + if (ret) + return dev_err_probe(dev, ret, "Failed to add child devices\n"); + + return 0; +} + +static const struct of_device_id qnap_mcu_dt_ids[] = { + { .compatible = "qnap,ts433-mcu", .data = &qnap_ts433_mcu }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, qnap_mcu_dt_ids); + +static struct serdev_device_driver qnap_mcu_drv = { + .probe = qnap_mcu_probe, + .driver = { + .name = "qnap-mcu", + .of_match_table = qnap_mcu_dt_ids, + }, +}; +module_serdev_device_driver(qnap_mcu_drv); + +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU core driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mfd/qnap-mcu.h b/include/linux/mfd/qnap-mcu.h new file mode 100644 index 000000000000..8d48c212fd44 --- /dev/null +++ b/include/linux/mfd/qnap-mcu.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Core definitions for QNAP MCU MFD driver. + * Copyright (C) 2024 Heiko Stuebner + */ + +#ifndef _LINUX_QNAP_MCU_H_ +#define _LINUX_QNAP_MCU_H_ + +struct qnap_mcu; + +struct qnap_mcu_variant { + u32 baud_rate; + int num_drives; + int fan_pwm_min; + int fan_pwm_max; + bool usb_led; +}; + +int qnap_mcu_exec(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size, + u8 *reply_data, size_t reply_data_size); +int qnap_mcu_exec_with_ack(struct qnap_mcu *mcu, + const u8 *cmd_data, size_t cmd_data_size); + +#endif /* _LINUX_QNAP_MCU_H_ */ From patchwork Thu Sep 5 18:52:28 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 826123 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id E46191A704E; Thu, 5 Sep 2024 18:52:54 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562376; cv=none; b=CLN5MG2s9BEx68fDFBXbD9R/qa5z/lDDN9hYwhrFje12+A1BhoKBmUYTDaQKr0zFcZzh2e1U2beuNFbjRRkYxLWklLzjzigdNA2LDNcMhT4p+m5i3vPPkGoG5bdn41xCY0kGDIQ6ODpR8by6HIEiooL0YbNtKIl9xwqAxRamm6c= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562376; c=relaxed/simple; bh=+ScavcFBSW6x5f42ayZ1wPfZTcojYc72Zpx2ynh9RzE=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=OjCnaRJncHbLqNFa8pO3DC9REFGhVcUjQNJ/4R4ym6naeU7DQj/FuxMjukNwAVuKRgI/oMJL87JAnZOWgxkI6VXSrRYGLnmyJt5Rmep9z+GiRokmEAMtjYgd5lDRJV4PI8cDfCd6V+0Sj8uEsi2mD8F1tc/AF5WruTO6/4RU+z0= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=eg+z/4v6; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="eg+z/4v6" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=eBcuipygRLUwuLURZ3Gz94R8nT1VS4CjBzZpMMxaulM=; b=eg+z/4v6y/jk4QG6fsP0UAVRDl HiD6TUAvN/rOvuP85RiTCWguJ8KGef2ySrowV/3+zb2vLqMVbvbHz0IA7WeOYfDwoA0Rr0teip7f1 EoZKp9HkPaj+Nxvf8wX+xPhQtnMikZTL11KA2im7957Y+6g9WDB3eQ29c5vXYydMz5HUw+5DL9/gk /MFMBCEhBwwZCPCIYSDNsgiAIU3lMVb/HNsGoNQUX3PMKVMDfuH6ifXqvNtlsMFYq1OORcZymJ145 ifnMVHcyXN4XnN2EyzJoRJyy9Jm/OpO5TPPA2bCmdXxuFLcAlThqHKJU0HFsDwn94piqUJEZJ8pM3 /+rKWMrg==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHay-0003sR-Oz; Thu, 05 Sep 2024 20:52:40 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [PATCH v7 4/8] leds: add driver for LEDs from qnap-mcu devices Date: Thu, 5 Sep 2024 20:52:28 +0200 Message-ID: <20240905185232.2899464-5-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 This adds a driver that connects to the qnap-mcu mfd driver and provides access to the LEDs on it. Signed-off-by: Heiko Stuebner --- MAINTAINERS | 1 + drivers/leds/Kconfig | 11 ++ drivers/leds/Makefile | 1 + drivers/leds/leds-qnap-mcu.c | 227 +++++++++++++++++++++++++++++++++++ 4 files changed, 240 insertions(+) create mode 100644 drivers/leds/leds-qnap-mcu.c diff --git a/MAINTAINERS b/MAINTAINERS index ee6e98ba2e6f..943905cbcf62 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18682,6 +18682,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c F: include/linux/qnap-mcu.h diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 8d9d8da376e4..9a337478dd80 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -580,6 +580,17 @@ config LEDS_PCA995X LED driver chips accessed via the I2C bus. Supported devices include PCA9955BTW, PCA9952TW and PCA9955TW. +config LEDS_QNAP_MCU + tristate "LED Support for QNAP MCU controllers" + depends on LEDS_CLASS + depends on MFD_QNAP_MCU + help + This option enables support for LEDs available on embedded + controllers used in QNAP NAS devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-leds. + config LEDS_WM831X_STATUS tristate "LED support for status LEDs on WM831x PMICs" depends on LEDS_CLASS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 18afbb5a23ee..c6f74865d729 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -79,6 +79,7 @@ obj-$(CONFIG_LEDS_PCA995X) += leds-pca995x.o obj-$(CONFIG_LEDS_PM8058) += leds-pm8058.o obj-$(CONFIG_LEDS_POWERNV) += leds-powernv.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o +obj-$(CONFIG_LEDS_QNAP_MCU) += leds-qnap-mcu.o obj-$(CONFIG_LEDS_REGULATOR) += leds-regulator.o obj-$(CONFIG_LEDS_SC27XX_BLTC) += leds-sc27xx-bltc.o obj-$(CONFIG_LEDS_SUN50I_A100) += leds-sun50i-a100.o diff --git a/drivers/leds/leds-qnap-mcu.c b/drivers/leds/leds-qnap-mcu.c new file mode 100644 index 000000000000..4e4709456261 --- /dev/null +++ b/drivers/leds/leds-qnap-mcu.c @@ -0,0 +1,227 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Driver for LEDs found on QNAP MCU devices + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include + +enum qnap_mcu_err_led_mode { + QNAP_MCU_ERR_LED_ON = 0, + QNAP_MCU_ERR_LED_OFF = 1, + QNAP_MCU_ERR_LED_BLINK_FAST = 2, + QNAP_MCU_ERR_LED_BLINK_SLOW = 3, +}; + +struct qnap_mcu_err_led { + struct qnap_mcu *mcu; + struct led_classdev cdev; + char name[LED_MAX_NAME_SIZE]; + u8 num; + u8 mode; +}; + +static inline struct qnap_mcu_err_led * + cdev_to_qnap_mcu_err_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct qnap_mcu_err_led, cdev); +} + +static int qnap_mcu_err_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct qnap_mcu_err_led *err_led = cdev_to_qnap_mcu_err_led(led_cdev); + u8 cmd[] = { '@', 'R', '0' + err_led->num, '0' }; + + /* Don't disturb a possible set blink-mode if LED stays on */ + if (brightness != 0 && err_led->mode >= QNAP_MCU_ERR_LED_BLINK_FAST) + return 0; + + err_led->mode = brightness ? QNAP_MCU_ERR_LED_ON : QNAP_MCU_ERR_LED_OFF; + cmd[3] = '0' + err_led->mode; + + return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_err_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct qnap_mcu_err_led *err_led = cdev_to_qnap_mcu_err_led(led_cdev); + u8 cmd[] = { '@', 'R', '0' + err_led->num, '0' }; + + /* LED is off, nothing to do */ + if (err_led->mode == QNAP_MCU_ERR_LED_OFF) + return 0; + + if (*delay_on < 500) { + *delay_on = 100; + *delay_off = 100; + err_led->mode = QNAP_MCU_ERR_LED_BLINK_FAST; + } else { + *delay_on = 500; + *delay_off = 500; + err_led->mode = QNAP_MCU_ERR_LED_BLINK_SLOW; + } + + cmd[3] = '0' + err_led->mode; + + return qnap_mcu_exec_with_ack(err_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_register_err_led(struct device *dev, struct qnap_mcu *mcu, int num_err_led) +{ + struct qnap_mcu_err_led *err_led; + int ret; + + err_led = devm_kzalloc(dev, sizeof(*err_led), GFP_KERNEL); + if (!err_led) + return -ENOMEM; + + err_led->mcu = mcu; + err_led->num = num_err_led; + err_led->mode = QNAP_MCU_ERR_LED_OFF; + + scnprintf(err_led->name, LED_MAX_NAME_SIZE, "hdd%d:red:status", num_err_led + 1); + err_led->cdev.name = err_led->name; + + err_led->cdev.brightness_set_blocking = qnap_mcu_err_led_set; + err_led->cdev.blink_set = qnap_mcu_err_led_blink_set; + err_led->cdev.brightness = 0; + err_led->cdev.max_brightness = 1; + + ret = devm_led_classdev_register(dev, &err_led->cdev); + if (ret) + return ret; + + return qnap_mcu_err_led_set(&err_led->cdev, 0); +} + +enum qnap_mcu_usb_led_mode { + QNAP_MCU_USB_LED_ON = 1, + QNAP_MCU_USB_LED_OFF = 3, + QNAP_MCU_USB_LED_BLINK = 2, +}; + +struct qnap_mcu_usb_led { + struct qnap_mcu *mcu; + struct led_classdev cdev; + u8 mode; +}; + +static inline struct qnap_mcu_usb_led * + cdev_to_qnap_mcu_usb_led(struct led_classdev *led_cdev) +{ + return container_of(led_cdev, struct qnap_mcu_usb_led, cdev); +} + +static int qnap_mcu_usb_led_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct qnap_mcu_usb_led *usb_led = cdev_to_qnap_mcu_usb_led(led_cdev); + u8 cmd[] = { '@', 'C', 0 }; + + /* Don't disturb a possible set blink-mode if LED stays on */ + if (brightness != 0 && usb_led->mode == QNAP_MCU_USB_LED_BLINK) + return 0; + + usb_led->mode = brightness ? QNAP_MCU_USB_LED_ON : QNAP_MCU_USB_LED_OFF; + + /* + * Byte 3 is shared between the usb led target on/off/blink + * and also the buzzer control (in the input driver) + */ + cmd[2] = 'D' + usb_led->mode; + + return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_usb_led_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct qnap_mcu_usb_led *usb_led = cdev_to_qnap_mcu_usb_led(led_cdev); + u8 cmd[] = { '@', 'C', 0 }; + + /* LED is off, nothing to do */ + if (usb_led->mode == QNAP_MCU_USB_LED_OFF) + return 0; + + *delay_on = 250; + *delay_off = 250; + usb_led->mode = QNAP_MCU_USB_LED_BLINK; + + /* + * Byte 3 is shared between the USB LED target on/off/blink + * and also the buzzer control (in the input driver) + */ + cmd[2] = 'D' + usb_led->mode; + + return qnap_mcu_exec_with_ack(usb_led->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_register_usb_led(struct device *dev, struct qnap_mcu *mcu) +{ + struct qnap_mcu_usb_led *usb_led; + int ret; + + usb_led = devm_kzalloc(dev, sizeof(*usb_led), GFP_KERNEL); + if (!usb_led) + return -ENOMEM; + + usb_led->mcu = mcu; + usb_led->mode = QNAP_MCU_USB_LED_OFF; + usb_led->cdev.name = "usb:blue:disk"; + usb_led->cdev.brightness_set_blocking = qnap_mcu_usb_led_set; + usb_led->cdev.blink_set = qnap_mcu_usb_led_blink_set; + usb_led->cdev.brightness = 0; + usb_led->cdev.max_brightness = 1; + + ret = devm_led_classdev_register(dev, &usb_led->cdev); + if (ret) + return ret; + + return qnap_mcu_usb_led_set(&usb_led->cdev, 0); +} + +static int qnap_mcu_leds_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent); + const struct qnap_mcu_variant *variant = pdev->dev.platform_data; + int ret; + + for (int i = 0; i < variant->num_drives; i++) { + ret = qnap_mcu_register_err_led(&pdev->dev, mcu, i); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to register error LED %d\n", i); + } + + if (variant->usb_led) { + ret = qnap_mcu_register_usb_led(&pdev->dev, mcu); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to register USB LED\n"); + } + + return 0; +} + +static struct platform_driver qnap_mcu_leds_driver = { + .probe = qnap_mcu_leds_probe, + .driver = { + .name = "qnap-mcu-leds", + }, +}; +module_platform_driver(qnap_mcu_leds_driver); + +MODULE_ALIAS("platform:qnap-mcu-leds"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU LEDs driver"); +MODULE_LICENSE("GPL"); From patchwork Thu Sep 5 18:52:29 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 825740 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D04C91A42C8; Thu, 5 Sep 2024 18:52:53 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562376; cv=none; b=PEJTzWECg2rjNrTLTvaPUcEemtgqmH8E/P0YM3nAl3Ga+yEAk/zw0FHQKH+H/5BP50+NirhWnAg29ZUNABY8pZ9iq8+W4HTLZy4L1l77QRZKoCyxz+DIsEh76zlwSB5QfbdZTrC486tdmUELVM0vs0NoyrE7v1j3DJiK4H274Lo= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562376; c=relaxed/simple; bh=QfBC6TZ1pPBrMS5Q767mbLRdCYso7N9Uo2jOQG5OHvo=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=ADww54gO5Im2OA8M0lN0bTFZeBT2c4fucstz/2z3jZV6pZLePtc1EsuX2xSj+4XVUkKw20jPzvcY5EHhGrqa7FaoKhYokIs/H22XAMTxRMw0FkOlpuynPKSM1eVJW0yQvErg8O/eIFtOiBndMRvBwX8GIVsM+AoIjPk9ltsqvzg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=UfgwRKVF; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="UfgwRKVF" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=0sY7qUYmdAIirG1Qu66FGCdht5zSpuS9Ftaq1XOfp0I=; b=UfgwRKVF+fUGPDFhEZKBzxCVg7 k/8NxNKWUwGk8yONnvdaZFwEn8CE/gMuH/j1KqKipkaIjJ2ONuqQeusG135hMoYqay1oOS6Y2twO4 rJq6y0YjpessTzXHt9cOCUDYcwZKDbKFOfbgdVH1J2hVo9Wfk/tJjtHlrHvld5nNCKJaLBjQJRSOs q8U+3MZyUt+yfYLGcx/feWXpwz4MtqluuPgaWKOk64NPRh8mtew+lw0N2jiy5htw/oZ80ixwphUcK y0JuopxHCdoRznHSLwmHGMHEP1+fh/MpP/H+7utkC/bX43ZjnsZagTvbCIq+Yz1f78Ci+Pric01JY hV8qmRMA==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHaz-0003sR-ES; Thu, 05 Sep 2024 20:52:41 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [PATCH v7 5/8] Input: add driver for the input part of qnap-mcu devices Date: Thu, 5 Sep 2024 20:52:29 +0200 Message-ID: <20240905185232.2899464-6-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The MCU controls the power-button and beeper, so expose them as input device. There is of course no interrupt line, so the status of the power-button needs to be polled. To generate an event the power-button also needs to be held for 1-2 seconds, so the polling interval does not need to be overly fast. Acked-by: Dmitry Torokhov Signed-off-by: Heiko Stuebner --- MAINTAINERS | 1 + drivers/input/misc/Kconfig | 12 +++ drivers/input/misc/Makefile | 1 + drivers/input/misc/qnap-mcu-input.c | 153 ++++++++++++++++++++++++++++ 4 files changed, 167 insertions(+) create mode 100644 drivers/input/misc/qnap-mcu-input.c diff --git a/MAINTAINERS b/MAINTAINERS index 943905cbcf62..cc5ef91d019e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18682,6 +18682,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/input/misc/qnap-mcu-input.c F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c F: include/linux/qnap-mcu.h diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 6a852c76331b..13d135257e06 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -917,6 +917,18 @@ config INPUT_HISI_POWERKEY To compile this driver as a module, choose M here: the module will be called hisi_powerkey. +config INPUT_QNAP_MCU + tristate "Input Support for QNAP MCU controllers" + depends on MFD_QNAP_MCU + help + This option enables support for input elements available on + embedded controllers used in QNAP NAS devices. + + This includes a polled power-button as well as a beeper. + + To compile this driver as a module, choose M here: the + module will be called qnap-mcu-input. + config INPUT_RAVE_SP_PWRBUTTON tristate "RAVE SP Power button Driver" depends on RAVE_SP_CORE diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 4f7f736831ba..6d91804d0a6f 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o obj-$(CONFIG_INPUT_PWM_VIBRA) += pwm-vibra.o +obj-$(CONFIG_INPUT_QNAP_MCU) += qnap-mcu-input.o obj-$(CONFIG_INPUT_RAVE_SP_PWRBUTTON) += rave-sp-pwrbutton.o obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o obj-$(CONFIG_INPUT_REGULATOR_HAPTIC) += regulator-haptic.o diff --git a/drivers/input/misc/qnap-mcu-input.c b/drivers/input/misc/qnap-mcu-input.c new file mode 100644 index 000000000000..76e62f0816c1 --- /dev/null +++ b/drivers/input/misc/qnap-mcu-input.c @@ -0,0 +1,153 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Driver for input events on QNAP-MCUs + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include + +/* + * The power-key needs to be pressed for a while to create an event, + * so there is no use for overly frequent polling. + */ +#define POLL_INTERVAL 500 + +struct qnap_mcu_input_dev { + struct input_dev *input; + struct qnap_mcu *mcu; + struct device *dev; + + struct work_struct beep_work; + int beep_type; +}; + +static void qnap_mcu_input_poll(struct input_dev *input) +{ + struct qnap_mcu_input_dev *idev = input_get_drvdata(input); + static const u8 cmd[] = { '@', 'C', 'V' }; + u8 reply[4]; + int state, ret; + + /* poll the power button */ + ret = qnap_mcu_exec(idev->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return; + + /* First bytes must mirror the sent command */ + if (memcmp(cmd, reply, sizeof(cmd))) { + dev_err(idev->dev, "malformed data received\n"); + return; + } + + state = reply[3] - 0x30; + input_event(input, EV_KEY, KEY_POWER, state); + input_sync(input); +} + +static void qnap_mcu_input_beeper_work(struct work_struct *work) +{ + struct qnap_mcu_input_dev *idev = + container_of(work, struct qnap_mcu_input_dev, beep_work); + const u8 cmd[] = { '@', 'C', (idev->beep_type == SND_TONE) ? '3' : '2' }; + + qnap_mcu_exec_with_ack(idev->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_input_event(struct input_dev *input, unsigned int type, + unsigned int code, int value) +{ + struct qnap_mcu_input_dev *idev = input_get_drvdata(input); + + if (type != EV_SND || (code != SND_BELL && code != SND_TONE)) + return -EOPNOTSUPP; + + if (value < 0) + return -EINVAL; + + /* beep runtime is determined by the MCU */ + if (value == 0) + return 0; + + /* Schedule work to actually turn the beeper on */ + idev->beep_type = code; + schedule_work(&idev->beep_work); + + return 0; +} + +static void qnap_mcu_input_close(struct input_dev *input) +{ + struct qnap_mcu_input_dev *idev = input_get_drvdata(input); + + cancel_work_sync(&idev->beep_work); +} + +static int qnap_mcu_input_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent); + struct qnap_mcu_input_dev *idev; + struct device *dev = &pdev->dev; + struct input_dev *input; + int ret; + + idev = devm_kzalloc(dev, sizeof(*idev), GFP_KERNEL); + if (!idev) + return -ENOMEM; + + input = devm_input_allocate_device(dev); + if (!input) + return dev_err_probe(dev, -ENOMEM, "no memory for input device\n"); + + idev->input = input; + idev->dev = dev; + idev->mcu = mcu; + + input_set_drvdata(input, idev); + + input->name = "qnap-mcu"; + input->phys = "qnap-mcu-input/input0"; + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + input->event = qnap_mcu_input_event; + input->close = qnap_mcu_input_close; + + input_set_capability(input, EV_KEY, KEY_POWER); + input_set_capability(input, EV_SND, SND_BELL); + input_set_capability(input, EV_SND, SND_TONE); + + INIT_WORK(&idev->beep_work, qnap_mcu_input_beeper_work); + + ret = input_setup_polling(input, qnap_mcu_input_poll); + if (ret) + return dev_err_probe(dev, ret, "unable to set up polling\n"); + + input_set_poll_interval(input, POLL_INTERVAL); + + ret = input_register_device(input); + if (ret) + return dev_err_probe(dev, ret, "unable to register input device\n"); + + return 0; +} + +static struct platform_driver qnap_mcu_input_driver = { + .probe = qnap_mcu_input_probe, + .driver = { + .name = "qnap-mcu-input", + }, +}; +module_platform_driver(qnap_mcu_input_driver); + +MODULE_ALIAS("platform:qnap-mcu-input"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU input driver"); +MODULE_LICENSE("GPL"); From patchwork Thu Sep 5 18:52:30 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 826126 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7A4CB8288C; Thu, 5 Sep 2024 18:52:48 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562370; cv=none; b=kGlv7To2ujA7SSv0LHmQBuJI3ARygnTQYPK5CfGaYwQzenWjeT0WyuJ3g5ojH/zFxNufxPqLtYlqVqiJyiEnHWT4tQTK8wo0PlXqzx8LAUl1/LZ1/Yo4OHaTIEmv8Ooha33riBdOcm4dQF7nX6ci6CotVlLMjaEmPZiTtkVtwEI= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562370; c=relaxed/simple; bh=d8a0rmL12mfPWuonXo+8oLO9zItXfsYK+NaNAFwWXY8=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=owcOupx8FuzWyD9LauAFrwACtO7bZ8Lr7f2n80xZGFiHsRM7agAo8k7LWRHljbxkgrvswgFNY2bGfIk0/p35X5aDTGZvBq5wcNbFxu+PwPAikoMeoYj3lZ6/bzLzUWdG/tQBqobHhEI/yVQieRlmG/wUVr8sfoCSwN19OumhD8o= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=R5G11yew; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="R5G11yew" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=PCTPxafBX97z3nY81DlNQivXJCRSLcl5w7ig/OlcBZQ=; b=R5G11yewb9zdtszVGdk0ECDHbe mlRWBH921ffxeMzIeAO9g/hRaRNyPiCLKwpYUDcw0yXLWky4F0pQ1bdXWq77kkaBmqESNji12bq50 mq/PmDxSr3N8LlVpcYTuCPODhr28OiOMStBMNrIIOa8wHJGMQd+YMHwhe1O/XqOi5meri0oKIZnEG Jga1fktgUy4GfDCnzKl74vJ2oM9Dt4CiRXpwz/O1kXABCtAKUOTrgPSZVCCfe+/dG/DSnvBpIMrGC A6x/GhHioVeRsVeKQYpu/fFQjH52JI6FKFhfkT2ZX1BzDQfTWQmcjXC+gdTWEpO+zP2gHlHIMYe4n tKhzFuWQ==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHb0-0003sR-4F; Thu, 05 Sep 2024 20:52:42 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [PATCH v7 6/8] hwmon: add driver for the hwmon parts of qnap-mcu devices Date: Thu, 5 Sep 2024 20:52:30 +0200 Message-ID: <20240905185232.2899464-7-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The MCU can be found on network-attached-storage devices made by QNAP and provides access to fan control including reading back its RPM as well as reading the temperature of the NAS case. Acked-by: Guenter Roeck Signed-off-by: Heiko Stuebner --- Documentation/hwmon/index.rst | 1 + Documentation/hwmon/qnap-mcu-hwmon.rst | 27 ++ MAINTAINERS | 1 + drivers/hwmon/Kconfig | 12 + drivers/hwmon/Makefile | 1 + drivers/hwmon/qnap-mcu-hwmon.c | 364 +++++++++++++++++++++++++ 6 files changed, 406 insertions(+) create mode 100644 Documentation/hwmon/qnap-mcu-hwmon.rst create mode 100644 drivers/hwmon/qnap-mcu-hwmon.c diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst index 913c11390a45..7adbe23f0659 100644 --- a/Documentation/hwmon/index.rst +++ b/Documentation/hwmon/index.rst @@ -199,6 +199,7 @@ Hardware Monitoring Kernel Drivers pxe1610 pwm-fan q54sj108a2 + qnap-mcu-hwmon raspberrypi-hwmon sbrmi sbtsi_temp diff --git a/Documentation/hwmon/qnap-mcu-hwmon.rst b/Documentation/hwmon/qnap-mcu-hwmon.rst new file mode 100644 index 000000000000..83407e3408f2 --- /dev/null +++ b/Documentation/hwmon/qnap-mcu-hwmon.rst @@ -0,0 +1,27 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later + +Kernel driver qnap-mcu-hwmon +============================ + +This driver enables the use of the hardware monitoring and fan control +of the MCU used on some QNAP network attached storage devices. + +Author: Heiko Stuebner + +Description +----------- + +The driver implements a simple interface for driving the fan controlled by +setting its PWM output value and exposes the fan rpm and case-temperature +to user space through hwmon's sysfs interface. + +The fan rotation speed returned via the optional 'fan1_input' is calculated +inside the MCU device. + +The driver provides the following sensor accesses in sysfs: + +=============== ======= ======================================================= +fan1_input ro fan tachometer speed in RPM +pwm1 rw relative speed (0-255), 255=max. speed. +temp1_input ro Measured temperature in millicelsius +=============== ======= ======================================================= diff --git a/MAINTAINERS b/MAINTAINERS index cc5ef91d019e..8c35c994d0b0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -18682,6 +18682,7 @@ F: drivers/media/tuners/qm1d1c0042* QNAP MCU DRIVER M: Heiko Stuebner S: Maintained +F: drivers/hwmon/qnap-mcu-hwmon.c F: drivers/input/misc/qnap-mcu-input.c F: drivers/leds/leds-qnap-mcu.c F: drivers/mfd/qnap-mcu.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index b60fe2e58ad6..0118ad91057e 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1793,6 +1793,18 @@ config SENSORS_PWM_FAN This driver can also be built as a module. If so, the module will be called pwm-fan. +config SENSORS_QNAP_MCU_HWMON + tristate "QNAP MCU hardware monitoring" + depends on MFD_QNAP_MCU + depends on THERMAL || THERMAL=n + help + Say yes here to enable support for fan and temperature sensor + connected to a QNAP MCU, as found in a number of QNAP network + attached storage devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-hwmon. + config SENSORS_RASPBERRYPI_HWMON tristate "Raspberry Pi voltage monitor" depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index b1c7056c37db..d60f46a03cc9 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -187,6 +187,7 @@ obj-$(CONFIG_SENSORS_POWERZ) += powerz.o obj-$(CONFIG_SENSORS_POWR1220) += powr1220.o obj-$(CONFIG_SENSORS_PT5161L) += pt5161l.o obj-$(CONFIG_SENSORS_PWM_FAN) += pwm-fan.o +obj-$(CONFIG_SENSORS_QNAP_MCU_HWMON) += qnap-mcu-hwmon.o obj-$(CONFIG_SENSORS_RASPBERRYPI_HWMON) += raspberrypi-hwmon.o obj-$(CONFIG_SENSORS_SBTSI) += sbtsi_temp.o obj-$(CONFIG_SENSORS_SBRMI) += sbrmi.o diff --git a/drivers/hwmon/qnap-mcu-hwmon.c b/drivers/hwmon/qnap-mcu-hwmon.c new file mode 100644 index 000000000000..29057514739c --- /dev/null +++ b/drivers/hwmon/qnap-mcu-hwmon.c @@ -0,0 +1,364 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/* + * Driver for hwmon elements found on QNAP-MCU devices + * + * Copyright (C) 2024 Heiko Stuebner + */ + +#include +#include +#include +#include +#include +#include +#include + +struct qnap_mcu_hwmon { + struct qnap_mcu *mcu; + struct device *dev; + + unsigned int pwm_min; + unsigned int pwm_max; + + struct fwnode_handle *fan_node; + unsigned int fan_state; + unsigned int fan_max_state; + unsigned int *fan_cooling_levels; + + struct thermal_cooling_device *cdev; + struct hwmon_chip_info info; +}; + +static int qnap_mcu_hwmon_get_rpm(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] = { '@', 'F', 'A' }; + u8 reply[6]; + int ret; + + /* poll the fan rpm */ + ret = qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First 2 bytes must mirror the sent command */ + if (memcmp(cmd, reply, 2)) + return -EIO; + + return reply[4] * 30; +} + +static int qnap_mcu_hwmon_get_pwm(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] = { '@', 'F', 'Z', '0' }; /* 0 = fan-id? */ + u8 reply[4]; + int ret; + + /* poll the fan pwm */ + ret = qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First 3 bytes must mirror the sent command */ + if (memcmp(cmd, reply, 3)) + return -EIO; + + return reply[3]; +} + +static int qnap_mcu_hwmon_set_pwm(struct qnap_mcu_hwmon *hwm, u8 pwm) +{ + const u8 cmd[] = { '@', 'F', 'W', '0', pwm }; /* 0 = fan-id?, pwm 0-255 */ + + /* set the fan pwm */ + return qnap_mcu_exec_with_ack(hwm->mcu, cmd, sizeof(cmd)); +} + +static int qnap_mcu_hwmon_get_temp(struct qnap_mcu_hwmon *hwm) +{ + static const u8 cmd[] = { '@', 'T', '3' }; + u8 reply[4]; + int ret; + + /* poll the fan rpm */ + ret = qnap_mcu_exec(hwm->mcu, cmd, sizeof(cmd), reply, sizeof(reply)); + if (ret) + return ret; + + /* First bytes must mirror the sent command */ + if (memcmp(cmd, reply, sizeof(cmd))) + return -EIO; + + /* + * There is an unknown bit set in bit7. + * Bits [6:0] report the actual temperature as returned by the + * original qnap firmware-tools, so just drop bit7 for now. + */ + return (reply[3] & 0x7f) * 1000; +} + +static int qnap_mcu_hwmon_write(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long val) +{ + struct qnap_mcu_hwmon *hwm = dev_get_drvdata(dev); + + switch (attr) { + case hwmon_pwm_input: + if (val < 0 || val > 255) + return -EINVAL; + + if (val != 0) + val = clamp_val(val, hwm->pwm_min, hwm->pwm_max); + + return qnap_mcu_hwmon_set_pwm(hwm, val); + default: + return -EOPNOTSUPP; + } + + return 0; +} + +static int qnap_mcu_hwmon_read(struct device *dev, enum hwmon_sensor_types type, + u32 attr, int channel, long *val) +{ + struct qnap_mcu_hwmon *hwm = dev_get_drvdata(dev); + int ret; + + switch (type) { + case hwmon_pwm: + switch (attr) { + case hwmon_pwm_input: + ret = qnap_mcu_hwmon_get_pwm(hwm); + if (ret < 0) + return ret; + + *val = ret; + return 0; + default: + return -EOPNOTSUPP; + } + case hwmon_fan: + ret = qnap_mcu_hwmon_get_rpm(hwm); + if (ret < 0) + return ret; + + *val = ret; + return 0; + case hwmon_temp: + ret = qnap_mcu_hwmon_get_temp(hwm); + if (ret < 0) + return ret; + + *val = ret; + return 0; + default: + return -EOPNOTSUPP; + } +} + +static umode_t qnap_mcu_hwmon_is_visible(const void *data, + enum hwmon_sensor_types type, + u32 attr, int channel) +{ + switch (type) { + case hwmon_temp: + return 0444; + + case hwmon_pwm: + return 0644; + + case hwmon_fan: + return 0444; + + default: + return 0; + } +} + +static const struct hwmon_ops qnap_mcu_hwmon_hwmon_ops = { + .is_visible = qnap_mcu_hwmon_is_visible, + .read = qnap_mcu_hwmon_read, + .write = qnap_mcu_hwmon_write, +}; + +/* thermal cooling device callbacks */ +static int qnap_mcu_hwmon_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct qnap_mcu_hwmon *hwm = cdev->devdata; + + if (!hwm) + return -EINVAL; + + *state = hwm->fan_max_state; + + return 0; +} + +static int qnap_mcu_hwmon_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct qnap_mcu_hwmon *hwm = cdev->devdata; + + if (!hwm) + return -EINVAL; + + *state = hwm->fan_state; + + return 0; +} + +static int qnap_mcu_hwmon_set_cur_state(struct thermal_cooling_device *cdev, + unsigned long state) +{ + struct qnap_mcu_hwmon *hwm = cdev->devdata; + int ret; + + if (!hwm || state > hwm->fan_max_state) + return -EINVAL; + + if (state == hwm->fan_state) + return 0; + + ret = qnap_mcu_hwmon_set_pwm(hwm, hwm->fan_cooling_levels[state]); + if (ret) + return ret; + + hwm->fan_state = state; + + return ret; +} + +static const struct thermal_cooling_device_ops qnap_mcu_hwmon_cooling_ops = { + .get_max_state = qnap_mcu_hwmon_get_max_state, + .get_cur_state = qnap_mcu_hwmon_get_cur_state, + .set_cur_state = qnap_mcu_hwmon_set_cur_state, +}; + +static void devm_fan_node_release(void *data) +{ + struct qnap_mcu_hwmon *hwm = data; + + fwnode_handle_put(hwm->fan_node); +} + +static int qnap_mcu_hwmon_get_cooling_data(struct device *dev, struct qnap_mcu_hwmon *hwm) +{ + struct fwnode_handle *fwnode; + int num, i, ret; + + fwnode = device_get_named_child_node(dev->parent, "fan-0"); + if (!fwnode) + return 0; + + /* if we found the fan-node, we're keeping it until device-unbind */ + hwm->fan_node = fwnode; + ret = devm_add_action_or_reset(dev, devm_fan_node_release, hwm); + if (ret) + return ret; + + num = fwnode_property_count_u32(fwnode, "cooling-levels"); + if (num <= 0) + return dev_err_probe(dev, num ? : -EINVAL, + "Failed to count elements in 'cooling-levels'\n"); + + hwm->fan_cooling_levels = devm_kcalloc(dev, num, sizeof(u32), + GFP_KERNEL); + if (!hwm->fan_cooling_levels) + return -ENOMEM; + + ret = fwnode_property_read_u32_array(fwnode, "cooling-levels", + hwm->fan_cooling_levels, num); + if (ret) + return dev_err_probe(dev, ret, "Failed to read 'cooling-levels'\n"); + + for (i = 0; i < num; i++) { + if (hwm->fan_cooling_levels[i] > hwm->pwm_max) + return dev_err_probe(dev, -EINVAL, "fan state[%d]:%d > %d\n", i, + hwm->fan_cooling_levels[i], hwm->pwm_max); + } + + hwm->fan_max_state = num - 1; + + return 0; +} + +static const struct hwmon_channel_info * const qnap_mcu_hwmon_channels[] = { + HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT), + HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT), + HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT), + NULL +}; + +static int qnap_mcu_hwmon_probe(struct platform_device *pdev) +{ + struct qnap_mcu *mcu = dev_get_drvdata(pdev->dev.parent); + const struct qnap_mcu_variant *variant = pdev->dev.platform_data; + struct qnap_mcu_hwmon *hwm; + struct thermal_cooling_device *cdev; + struct device *dev = &pdev->dev; + struct device *hwmon; + int ret; + + hwm = devm_kzalloc(dev, sizeof(*hwm), GFP_KERNEL); + if (!hwm) + return -ENOMEM; + + hwm->mcu = mcu; + hwm->dev = &pdev->dev; + hwm->pwm_min = variant->fan_pwm_min; + hwm->pwm_max = variant->fan_pwm_max; + + platform_set_drvdata(pdev, hwm); + + /* + * Set duty cycle to maximum allowed. + */ + ret = qnap_mcu_hwmon_set_pwm(hwm, hwm->pwm_max); + if (ret) + return ret; + + hwm->info.ops = &qnap_mcu_hwmon_hwmon_ops; + hwm->info.info = qnap_mcu_hwmon_channels; + + ret = qnap_mcu_hwmon_get_cooling_data(dev, hwm); + if (ret) + return ret; + + hwm->fan_state = hwm->fan_max_state; + + hwmon = devm_hwmon_device_register_with_info(dev, "qnapmcu", + hwm, &hwm->info, NULL); + if (IS_ERR(hwmon)) + return dev_err_probe(dev, PTR_ERR(hwmon), "Failed to register hwmon device\n"); + + /* + * Only register cooling device when we found cooling-levels. + * qnap_mcu_hwmon_get_cooling_data() will fail when reading malformed + * levels and only succeed with either no or correct cooling levels. + */ + if (IS_ENABLED(CONFIG_THERMAL) && hwm->fan_cooling_levels) { + cdev = devm_thermal_of_cooling_device_register(dev, + to_of_node(hwm->fan_node), "qnap-mcu-hwmon", + hwm, &qnap_mcu_hwmon_cooling_ops); + if (IS_ERR(cdev)) + return dev_err_probe(dev, PTR_ERR(cdev), + "Failed to register qnap-mcu-hwmon as cooling device\n"); + hwm->cdev = cdev; + } + + return 0; +} + +static struct platform_driver qnap_mcu_hwmon_driver = { + .probe = qnap_mcu_hwmon_probe, + .driver = { + .name = "qnap-mcu-hwmon", + }, +}; +module_platform_driver(qnap_mcu_hwmon_driver); + +MODULE_ALIAS("platform:qnap-mcu-hwmon"); +MODULE_AUTHOR("Heiko Stuebner "); +MODULE_DESCRIPTION("QNAP MCU hwmon driver"); +MODULE_LICENSE("GPL"); From patchwork Thu Sep 5 18:52:31 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 825742 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id B0E9B18DF78; Thu, 5 Sep 2024 18:52:50 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562372; cv=none; b=VJBcvJcQSaBUIaGPfbuqrxxeQfVeEatbN4tMvgbPt3VsAyygDgHdrVRtaU/EV7gKisPzPTLo/Rm7iEmXec3WNkMYSnDInkttBq9fG5jfb01bB5No8Q9sIdTE0h3Nf5TCx2k7D9obMxfAhmTjPSsIqMyZMszcskXAVFRI+Ak5rUA= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562372; c=relaxed/simple; bh=I1ayERe8+MKL+sKOTVHqL9vNWgJrFIP3xM5InJN9/c8=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=Rp4Q8S3ID1HoM04ZmJX0jG+c5C6NVaSG8UgfRe0x1toNjF5H5Efvi4uMZ4kOv4jQSAFqFXxM32lm45Qv6OtyfZtv61oP8TTnhKb6OotvPB1X3Kg9vJ1fTosw/Yz3iyYS2PxvYSNsAq0d20JglBIZcJ8smLarBCgMo+Z56PHeoU4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=EeRxgour; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="EeRxgour" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=OX2mDGoNhn5NuPQsdotMoW4uOBKIyWHrefRAShTe53U=; b=EeRxgour15Ya5XHLTphGx1wZz2 S+5glFb4R3wmamLqsaGdrXKfJV08lBq/5f8Xg8mFa/KGKPFV6BtvPPHgZ6hOkjZjAKRhUsuBgkDRh SB0+0HdF2sXr3Bo/JPnpf5QkVjT3Z3EUxEdGuCyA7X8oj0ZrQ+Rc1wW+m4V0nvJWLCcPTaWP6eiCf 9q4/CiI5VNdXk/KyLbu3zqkUleAAJAEP1zwhv9z3PFgk2sEc5FlsS5s2BNDnGOieBK8OzFrI5JNfP GenWoQ0xDgvpn1pZONWYUYJiiM925KbDwb7Jddg8XnpNQa+a9/qgJ+n1mIv3/d2U3U0NCEOqktpyC ts8AeFtw==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHb0-0003sR-QH; Thu, 05 Sep 2024 20:52:42 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [PATCH v7 7/8] arm64: dts: rockchip: hook up the MCU on the QNAP TS433 Date: Thu, 5 Sep 2024 20:52:31 +0200 Message-ID: <20240905185232.2899464-8-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The MCU is an important part of the device functionality. It provides functionality like fan-control, more leds, etc and even more important without it, the NAS-device cannot even fully turned off. Hook up the serial device to its uart and hook into the thermal management to control the fan according to the cpu temperature. While the MCU also provides a temperature sensor for the case, this one is just polled and does not provide functionality for handling trip points in hardware, so a lot of polling would be involved. As the cpu is only cooled passively in these devices, it's temperature rising will indicate the temperature level of the system just earlier. Signed-off-by: Heiko Stuebner --- .../boot/dts/rockchip/rk3568-qnap-ts433.dts | 57 +++++++++++++++++++ 1 file changed, 57 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index e601d9271ba8..4bc5f5691d45 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -483,6 +483,54 @@ rgmii_phy0: ethernet-phy@0 { }; }; +/* + * The MCU can provide system temperature too, but only by polling and of + * course also cannot set trip points. So attach to the cpu thermal-zone + * instead to control the fan. + */ +&cpu_thermal { + trips { + case_fan0: case-fan0 { + hysteresis = <2000>; + temperature = <35000>; + type = "active"; + }; + + case_fan1: case-fan1 { + hysteresis = <2000>; + temperature = <45000>; + type = "active"; + }; + + case_fan2: case-fan2 { + hysteresis = <2000>; + temperature = <65000>; + type = "active"; + }; + }; + + cooling-maps { + /* + * Always provide some air movement, due to small case + * full of harddrives. + */ + map1 { + cooling-device = <&fan THERMAL_NO_LIMIT 1>; + trip = <&case_fan0>; + }; + + map2 { + cooling-device = <&fan 2 3>; + trip = <&case_fan1>; + }; + + map3 { + cooling-device = <&fan 4 THERMAL_NO_LIMIT>; + trip = <&case_fan2>; + }; + }; +}; + &pcie30phy { data-lanes = <1 2>; status = "okay"; @@ -582,6 +630,15 @@ &tsadc { */ &uart0 { status = "okay"; + + mcu { + compatible = "qnap,ts433-mcu"; + + fan: fan-0 { + #cooling-cells = <2>; + cooling-levels = <0 64 89 128 166 204 221 238>; + }; + }; }; /* From patchwork Thu Sep 5 18:52:32 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Heiko Stuebner X-Patchwork-Id: 825743 Received: from gloria.sntech.de (gloria.sntech.de [185.11.138.130]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 7A51B158DC0; Thu, 5 Sep 2024 18:52:48 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.11.138.130 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562370; cv=none; b=CbMnTu/88Ry1o4Ng//LtvszqBbiodI6qx3X9T94+NGLpHEcWWP56Z/VBzBCSK0VYHqCvY4Ll8HLkOXi8wmBd1WbSI7yRxoy3An4Ozb7bIkKmy1SAcuqvXTY2bGtTMkOeVjZ/X5NX4j6hHiRMbY/tj8+s/RuBkUS6ghRVpfi9dow= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1725562370; c=relaxed/simple; bh=equbU9VBMIwdvGkqWk+AjPVcTc+O1BMZPBWXnDB1Dyo=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=Qf+m+Yp8I/xMi1Ds1xz2Po2gun+3sd5dgUTl1D0fm0kDUQ1WTuIc4drcx+5NvGSo5MJcABHJxoJWWtfz0jqIlShZ4Hayh5wseciAKv4aD1sN/ppcgb6gRuYSdTVGnVeiW8iI2Y+/ARqmXLx7LPeXHVYr+E0vZT9l93wThhofO/4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de; spf=pass smtp.mailfrom=sntech.de; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b=Zw2ev8a4; arc=none smtp.client-ip=185.11.138.130 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=sntech.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=sntech.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=sntech.de header.i=@sntech.de header.b="Zw2ev8a4" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=sntech.de; s=gloria202408; h=Content-Transfer-Encoding:MIME-Version:References: In-Reply-To:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:Resent-Date:Resent-From:Resent-Sender: Resent-To:Resent-Cc:Resent-Message-ID:List-Id:List-Help:List-Unsubscribe: List-Subscribe:List-Post:List-Owner:List-Archive; bh=q1jpFbe8UJlfuFdvluwPG8fKnNdFZmBXVzuyZQAcBU0=; b=Zw2ev8a4ieSzwL/N0YlGZzW/ll TKKyyBaABhDZ1kOpCLCfFkpqQ/qY8eaVT9pwdT0xUL91tY2qb6ru1I2JSnL4SWInTy8w2+QaVP1Qr Un/8mXkQ+CRnjD/tJ85HXqHWJqyBarz06F0vMw36oaQ7Khm3qkSrVxfFyhQrG0A2P4y5XU7vy65W1 YXtGsP8a03bamLMJuKSPVqDjbnxo/rLax1/V2T7boLTfN+eKbdsidip7y+Oc7GtV5xc2lnuR5pEMB zTMcXT944RBvfFsdbawLbD5GSjamt/3S45bZJyHGQaUHdZP1rlEtwG3HHbC0XihEr/G051j7aDSui qdAog12w==; Received: from i5e860d0f.versanet.de ([94.134.13.15] helo=phil.lan) by gloria.sntech.de with esmtpsa (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1smHb1-0003sR-Ft; Thu, 05 Sep 2024 20:52:43 +0200 From: Heiko Stuebner To: lee@kernel.org Cc: robh@kernel.org, krzk+dt@kernel.org, conor+dt@kernel.org, jdelvare@suse.com, linux@roeck-us.net, heiko@sntech.de, dmitry.torokhov@gmail.com, pavel@ucw.cz, ukleinek@debian.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-input@vger.kernel.org, linux-leds@vger.kernel.org Subject: [PATCH v7 8/8] arm64: dts: rockchip: set hdd led labels on qnap-ts433 Date: Thu, 5 Sep 2024 20:52:32 +0200 Message-ID: <20240905185232.2899464-9-heiko@sntech.de> X-Mailer: git-send-email 2.43.0 In-Reply-To: <20240905185232.2899464-1-heiko@sntech.de> References: <20240905185232.2899464-1-heiko@sntech.de> Precedence: bulk X-Mailing-List: linux-leds@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 The automatically generated names for the LEDs from color and function do not match nicely for the 4 hdds, so set them manually per the label property to also match the LEDs generated from the MCU. Signed-off-by: Heiko Stuebner --- arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts index 4bc5f5691d45..7bd32d230ad2 100644 --- a/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts +++ b/arch/arm64/boot/dts/rockchip/rk3568-qnap-ts433.dts @@ -50,6 +50,7 @@ led-0 { color = ; function = LED_FUNCTION_DISK; gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>; + label = "hdd1:green:disk"; linux,default-trigger = "disk-activity"; pinctrl-names = "default"; pinctrl-0 = <&hdd1_led_pin>; @@ -59,6 +60,7 @@ led-1 { color = ; function = LED_FUNCTION_DISK; gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>; + label = "hdd2:green:disk"; linux,default-trigger = "disk-activity"; pinctrl-names = "default"; pinctrl-0 = <&hdd2_led_pin>; @@ -68,6 +70,7 @@ led-2 { color = ; function = LED_FUNCTION_DISK; gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>; + label = "hdd3:green:disk"; linux,default-trigger = "disk-activity"; pinctrl-names = "default"; pinctrl-0 = <&hdd3_led_pin>; @@ -77,6 +80,7 @@ led-3 { color = ; function = LED_FUNCTION_DISK; gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "hdd4:green:disk"; linux,default-trigger = "disk-activity"; pinctrl-names = "default"; pinctrl-0 = <&hdd4_led_pin>;