From patchwork Thu May 23 22:03:34 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Sam Protsenko X-Patchwork-Id: 798445 Delivered-To: patch@linaro.org Received: by 2002:a5d:6a47:0:b0:354:fb4b:99cd with SMTP id t7csp436666wrw; Thu, 23 May 2024 15:03:44 -0700 (PDT) X-Forwarded-Encrypted: i=2; AJvYcCVjoA85iaAP4V/gq2hTdEcGXraaf4r8Q3jXxGN5NC+anE/1DtLLs62OdSE3jy73yI+8CzeuXTfPNxep7ST2CpkY X-Google-Smtp-Source: AGHT+IFDfH/eZrQzt4K07qVnYz5dvqaWf20gbptX7wcNJiRe76hx0yUUO2VB19zpQSOrivnO3Pyk X-Received: by 2002:a17:906:2b55:b0:a5a:5bc9:55c5 with SMTP id a640c23a62f3a-a62642d8126mr29744466b.18.1716501823892; Thu, 23 May 2024 15:03:43 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1716501823; cv=none; d=google.com; s=arc-20160816; b=kIFD/JaOg4p2sklEGPifB9uQqqkwusU4dtB5iyq14/KC30HuJ/4ikMobcVGq+1vbOB 2pd8iYd+uroZV0dkRw0A+ovSsTFZRmirImigH6/nvo435Aai+koeo9eFB5ttcWXqUnCA hS9P62LaEspNLAcNKJAu2JTcJ3PxhTiPVttn7C3bZiH98qj3n9oCaIfRzmCKuRWsy16P MY34H8MYNcbEqgGBDR2PxC7i0EItJd9dXhZ/EHuZmIEn1SWBBPZyxJVKn2BpbvqDHiZI eEslPSCml++j1i96jgLAVSg6ZcL53WDITvKBNsLY+GcZ4knnnIygNUiuEPHOtkGDC6Wt kexg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:content-transfer-encoding :mime-version:message-id:date:subject:cc:to:from:dkim-signature; bh=Y5oUZBqBZ3elrWJRvByOdWZ/YGiihm5pHCTdhuaw5b8=; fh=sqcEx/bls0Ew0qR4V/V2L2jBhgwqG/RNZOyk+dMNLSk=; b=kekgKjuET8gnx9+3Pjx85MGW/hSE//qrSq24O2MM44Xn0X54CcdyWA8WoWk+xcZzFK 2GxpbDBgmnwZsCJ+5y1PAs2W6hfP70rAjYJnxuaIxHIN2Aq5vuDVe7bqSujKZST3vF/z RCv9KEnR8tbFsTT6DVO8jGyD8/IOMt0Ox6K9B1Hhe/CHB9/3EaxA4kfHGqttsdGQ8jCz Ci8FTg4J5p39ys+cLCxgpYbl6zxv7yP0mTI4MydHSFvWHoE1gcsRDRBmuiZkokRRptJ1 iziRfGtUEcMRQ/zT1NOwQjGIc9ybHv0t4DPydQt1w47gL6nWV+5o1/PAX63ktSXWKl0Z RKeA==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yLmlile6; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [85.214.62.61]) by mx.google.com with ESMTPS id a640c23a62f3a-a626cc64225si10402666b.535.2024.05.23.15.03.43 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 23 May 2024 15:03:43 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) client-ip=85.214.62.61; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=yLmlile6; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 85.214.62.61 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id 929D788595; Fri, 24 May 2024 00:03:42 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="yLmlile6"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id BBBB288595; Fri, 24 May 2024 00:03:41 +0200 (CEST) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.2 Received: from mail-oi1-x22c.google.com (mail-oi1-x22c.google.com [IPv6:2607:f8b0:4864:20::22c]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 4129A8862E for ; Fri, 24 May 2024 00:03:37 +0200 (CEST) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=semen.protsenko@linaro.org Received: by mail-oi1-x22c.google.com with SMTP id 5614622812f47-3c9b94951d5so3400092b6e.3 for ; Thu, 23 May 2024 15:03:37 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1716501816; x=1717106616; darn=lists.denx.de; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:from:to:cc:subject:date:message-id:reply-to; bh=Y5oUZBqBZ3elrWJRvByOdWZ/YGiihm5pHCTdhuaw5b8=; b=yLmlile6rk8Ub7YUn1B/kkvs76s8TASjT5XgX8hvJc8ZVe7R46+0XH0SZYClsemw4K Ps8XdOF/DwowXaUoOMQy4L/CsmBpggebFTfu8d6b8Ig69+Yyo6w4NIeUzlQT8+ycwXA0 usHaI4onPVcPyNWmTqGJj/9+yL5k4Oqzfwp0hKzH5fIIFyGy6ITA8fwVCJVCMA2OXyqm FE2oSAJRy4cjFqZiq9LhsoLsZG/2BGR5xjCu0uk5gHbLHXt7tl7jvLel3k/2dI20h4wr VkJgFa2zF3f5Fncwb2dQAxjM7ztnqYhsumeIN92JEmjzDsMFW4IhiiaUjcd9v/dbHHST o/Sw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1716501816; x=1717106616; h=content-transfer-encoding:mime-version:message-id:date:subject:cc :to:from:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=Y5oUZBqBZ3elrWJRvByOdWZ/YGiihm5pHCTdhuaw5b8=; b=lUSK9BxRpl+4atpP6OZdqsGSkmG2AP5gMElOeVyGFGRcOd5hCnZqfom5QQV8JCdgu/ TlfImGcqu64UUaqb0cQw/8QjL5I4Rdn39TJy52/SRqVl/fltUHAecpYwZoT8S4aj39l/ qq5XFsxkUiug30GmIqTtr+OgHr0meY2Ykc+T6BV7y34onuWLkHQrJYYbilIkWqm6ArIm DuvimaUQkiG3ajWNlHRzHHgdzv1+KxqQB3sKsdLEzfFEz2XVYqgVRPgK50jOrz2QfeCw PjXQQxcXjRaxKuciZ7vIJh+oGhwENNBfKBxGEcjApqSapwulQoeiIuizY1FfdI1OW/O6 NJBw== X-Forwarded-Encrypted: i=1; AJvYcCWD7kHjvVxqeSJcuX5KPzjht6Yvft9EWAW3863lqC+8JNut/EpqW0Gv+5Z7LKB2k8VlrfVlxZeFYXaB+c3e3vYA/WE+hQ== X-Gm-Message-State: AOJu0Yw5KH9rnvbV0xnvy7GZ4+5PtXf0YD9q/VJQtEJyosZ6i5wPpJXx yj/NI4uxMhnHd0DH05drtSziymQRpt0muCMYylG8dB8BwcLMuZ0B3bFcEilFDQM= X-Received: by 2002:a05:6808:107:b0:3c9:66fb:ad68 with SMTP id 5614622812f47-3d1a66d4e03mr660828b6e.15.1716501815261; Thu, 23 May 2024 15:03:35 -0700 (PDT) Received: from localhost ([136.62.192.75]) by smtp.gmail.com with ESMTPSA id 5614622812f47-3d1b37394afsm42470b6e.55.2024.05.23.15.03.34 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Thu, 23 May 2024 15:03:34 -0700 (PDT) From: Sam Protsenko To: Tom Rini , Minkyu Kang Cc: Simon Glass , Sumit Garg , u-boot@lists.denx.de Subject: [PATCH] arm: exynos: Migrate E850-96 board to OF_UPSTREAM Date: Thu, 23 May 2024 17:03:34 -0500 Message-Id: <20240523220334.2502-1-semen.protsenko@linaro.org> X-Mailer: git-send-email 2.39.2 MIME-Version: 1.0 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean Use upstream device tree files and bindings. To do so: - imply (enable) OF_UPSTREAM option for E850-96 target - point DEFAULT_DEVICE_TREE in E850-96 config to upstream dts - remove now not needed local dts files, binding docs and headers - update MAINTAINERS correspondingly Upstream device tree files for Exynos850 SoC and E850-96 board are pretty much the same as local (removed) ones, so the conversion is rather straightforward and painless in this case. The appended dts file (arch/arm/dts/exynos850-e850-96-u-boot.dtsi) stays unchanged. The only remaining local dt-bindings doc for E850-96 board is exynos-pmu.yaml. It wasn't removed as it's quite different from Linux kernel version. Particularly U-Boot local version of exynos-pmu.yaml describes "samsung,uart-debug-1" property, which is not present in Linux kernel binding. Later it might be upstreamed to Linux kernel, and once it's done the U-Boot exynos-pmu.yaml binding can be removed. No functional change. Signed-off-by: Sam Protsenko Acked-by: Sumit Garg --- MAINTAINERS | 7 +- arch/arm/dts/Makefile | 1 - arch/arm/dts/exynos850-e850-96.dts | 273 ------ arch/arm/dts/exynos850-pinctrl.dtsi | 663 -------------- arch/arm/dts/exynos850.dtsi | 809 ------------------ arch/arm/mach-exynos/Kconfig | 1 + configs/e850-96_defconfig | 2 +- .../clock/samsung,exynos850-clock.yaml | 307 ------- .../soc/samsung/exynos-usi.yaml | 162 ---- include/dt-bindings/clock/exynos850.h | 337 -------- include/dt-bindings/soc/samsung,exynos-usi.h | 17 - 11 files changed, 3 insertions(+), 2576 deletions(-) delete mode 100644 arch/arm/dts/exynos850-e850-96.dts delete mode 100644 arch/arm/dts/exynos850-pinctrl.dtsi delete mode 100644 arch/arm/dts/exynos850.dtsi delete mode 100644 doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml delete mode 100644 doc/device-tree-bindings/soc/samsung/exynos-usi.yaml delete mode 100644 include/dt-bindings/clock/exynos850.h delete mode 100644 include/dt-bindings/soc/samsung,exynos-usi.h diff --git a/MAINTAINERS b/MAINTAINERS index 638b2fdd442f..f8afd7d51e2e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -578,19 +578,14 @@ F: drivers/clk/exynos/clk.h ARM SAMSUNG EXYNOS850 SOC M: Sam Protsenko S: Maintained -F: arch/arm/dts/exynos850-pinctrl.dtsi -F: arch/arm/dts/exynos850.dtsi -F: doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml F: drivers/clk/exynos/clk-exynos850.c F: drivers/pinctrl/exynos/pinctrl-exynos850.c -F: include/dt-bindings/clock/exynos850.h ARM SAMSUNG SOC DRIVERS M: Sam Protsenko S: Maintained -F: doc/device-tree-bindings/soc/samsung/* +F: doc/device-tree-bindings/soc/samsung/exynos-pmu.yaml F: drivers/soc/samsung/* -F: include/dt-bindings/soc/samsung,*.h ARM SANCLOUD M: Paul Barker diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index a5c82ebf7a5f..4b72d9f64863 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -31,7 +31,6 @@ dtb-$(CONFIG_EXYNOS7420) += exynos7420-espresso7420.dtb dtb-$(CONFIG_TARGET_A5Y17LTE) += exynos78x0-axy17lte.dtb dtb-$(CONFIG_TARGET_A3Y17LTE) += exynos78x0-axy17lte.dtb dtb-$(CONFIG_TARGET_A7Y17LTE) += exynos78x0-axy17lte.dtb -dtb-$(CONFIG_TARGET_E850_96) += exynos850-e850-96.dtb dtb-$(CONFIG_ARCH_APPLE) += \ t8103-j274.dtb \ diff --git a/arch/arm/dts/exynos850-e850-96.dts b/arch/arm/dts/exynos850-e850-96.dts deleted file mode 100644 index f074df8982b3..000000000000 --- a/arch/arm/dts/exynos850-e850-96.dts +++ /dev/null @@ -1,273 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * WinLink E850-96 board device tree source - * - * Copyright (C) 2018 Samsung Electronics Co., Ltd. - * Copyright (C) 2021 Linaro Ltd. - * - * Device tree source file for WinLink's E850-96 board which is based on - * Samsung Exynos850 SoC. - */ - -/dts-v1/; - -#include "exynos850.dtsi" -#include -#include -#include - -/ { - model = "WinLink E850-96 board"; - compatible = "winlink,e850-96", "samsung,exynos850"; - - aliases { - mmc0 = &mmc_0; - serial0 = &serial_0; - }; - - chosen { - stdout-path = &serial_0; - }; - - connector { - compatible = "gpio-usb-b-connector", "usb-b-connector"; - label = "micro-USB"; - type = "micro"; - vbus-supply = <®_usb_host_vbus>; - id-gpios = <&gpa0 0 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <µ_usb_det_pins>; - - port { - usb_dr_connector: endpoint { - remote-endpoint = <&usb1_drd_sw>; - }; - }; - }; - - /* - * RAM: 4 GiB (eMCP): - * - 2 GiB at 0x80000000 - * - 2 GiB at 0x880000000 - * - * 0xbab00000..0xbfffffff: secure memory (85 MiB). - */ - memory@80000000 { - device_type = "memory"; - reg = <0x0 0x80000000 0x3ab00000>, - <0x0 0xc0000000 0x40000000>, - <0x8 0x80000000 0x80000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - pinctrl-names = "default"; - pinctrl-0 = <&key_voldown_pins &key_volup_pins>; - - volume-down-key { - label = "Volume Down"; - linux,code = ; - gpios = <&gpa1 0 GPIO_ACTIVE_LOW>; - }; - - volume-up-key { - label = "Volume Up"; - linux,code = ; - gpios = <&gpa0 7 GPIO_ACTIVE_LOW>; - }; - }; - - leds { - compatible = "gpio-leds"; - - /* HEART_BEAT_LED */ - user_led1: led-1 { - label = "yellow:user1"; - gpios = <&gpg2 2 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_HEARTBEAT; - linux,default-trigger = "heartbeat"; - }; - - /* eMMC_LED */ - user_led2: led-2 { - label = "yellow:user2"; - gpios = <&gpg2 3 GPIO_ACTIVE_HIGH>; - color = ; - linux,default-trigger = "mmc0"; - }; - - /* SD_LED */ - user_led3: led-3 { - label = "white:user3"; - gpios = <&gpg2 4 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_SD; - linux,default-trigger = "mmc2"; - }; - - /* WIFI_LED */ - wlan_active_led: led-4 { - label = "yellow:wlan"; - gpios = <&gpg2 6 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_WLAN; - linux,default-trigger = "phy0tx"; - default-state = "off"; - }; - - /* BLUETOOTH_LED */ - bt_active_led: led-5 { - label = "blue:bt"; - gpios = <&gpg2 7 GPIO_ACTIVE_HIGH>; - color = ; - function = LED_FUNCTION_BLUETOOTH; - linux,default-trigger = "hci0-power"; - default-state = "off"; - }; - }; - - /* TODO: Remove this once PMIC is implemented */ - reg_dummy: regulator-0 { - compatible = "regulator-fixed"; - regulator-name = "dummy_reg"; - }; - - reg_usb_host_vbus: regulator-1 { - compatible = "regulator-fixed"; - regulator-name = "usb_host_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpa3 5 GPIO_ACTIVE_LOW>; - }; - - reserved-memory { - #address-cells = <2>; - #size-cells = <1>; - ranges; - - ramoops@f0000000 { - compatible = "ramoops"; - reg = <0x0 0xf0000000 0x200000>; - record-size = <0x20000>; - console-size = <0x20000>; - ftrace-size = <0x100000>; - pmsg-size = <0x20000>; - }; - }; - - /* - * RTC clock (XrtcXTI); external, must be 32.768 kHz. - * - * TODO: Remove this once RTC clock is implemented properly as part of - * PMIC driver. - */ - rtcclk: clock-rtcclk { - compatible = "fixed-clock"; - clock-output-names = "rtcclk"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; -}; - -&cmu_hsi { - clocks = <&oscclk>, <&rtcclk>, - <&cmu_top CLK_DOUT_HSI_BUS>, - <&cmu_top CLK_DOUT_HSI_MMC_CARD>, - <&cmu_top CLK_DOUT_HSI_USB20DRD>; - clock-names = "oscclk", "rtcclk", "dout_hsi_bus", - "dout_hsi_mmc_card", "dout_hsi_usb20drd"; -}; - -&mmc_0 { - status = "okay"; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-highspeed; - non-removable; - mmc-hs400-enhanced-strobe; - card-detect-delay = <200>; - clock-frequency = <800000000>; - bus-width = <8>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <2 4>; - samsung,dw-mshc-hs400-timing = <0 2>; - - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk_pins &sd0_cmd_pins &sd0_rdqs_pins &sd0_nreset_pins - &sd0_bus1_pins &sd0_bus4_pins &sd0_bus8_pins>; -}; - -&oscclk { - clock-frequency = <26000000>; -}; - -&pinctrl_alive { - key_voldown_pins: key-voldown-pins { - samsung,pins = "gpa1-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - key_volup_pins: key-volup-pins { - samsung,pins = "gpa0-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - micro_usb_det_pins: micro-usb-det-pins { - samsung,pins = "gpa0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; -}; - -&rtc { - status = "okay"; - clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>, <&rtcclk>; - clock-names = "rtc", "rtc_src"; -}; - -&serial_0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_pins>; -}; - -&usbdrd { - status = "okay"; - vdd10-supply = <®_dummy>; - vdd33-supply = <®_dummy>; -}; - -&usbdrd_dwc3 { - dr_mode = "otg"; - usb-role-switch; - role-switch-default-mode = "host"; - - port { - usb1_drd_sw: endpoint { - remote-endpoint = <&usb_dr_connector>; - }; - }; -}; - -&usbdrd_phy { - status = "okay"; -}; - -&usi_uart { - samsung,clkreq-on; /* needed for UART mode */ - status = "okay"; -}; - -&watchdog_cl0 { - status = "okay"; -}; - -&watchdog_cl1 { - status = "okay"; -}; diff --git a/arch/arm/dts/exynos850-pinctrl.dtsi b/arch/arm/dts/exynos850-pinctrl.dtsi deleted file mode 100644 index 424bc80bde68..000000000000 --- a/arch/arm/dts/exynos850-pinctrl.dtsi +++ /dev/null @@ -1,663 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung's Exynos850 SoC pin-mux and pin-config device tree source - * - * Copyright (C) 2017 Samsung Electronics Co., Ltd. - * Copyright (C) 2021 Linaro Ltd. - * - * Samsung's Exynos850 SoC pin-mux and pin-config options are listed as device - * tree nodes in this file. - */ - -#include -#include "exynos-pinctrl.h" - -&pinctrl_alive { - gpa0: gpa0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = , - , - , - , - , - , - , - ; - }; - - gpa1: gpa1-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = , - , - , - , - , - , - , - ; - }; - - gpa2: gpa2-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = , - , - , - , - , - , - , - ; - }; - - gpa3: gpa3-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = , - , - , - , - , - , - , - ; - }; - - gpa4: gpa4-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = , - , - , - ; - }; - - gpq0: gpq0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - /* I2C5 (also called CAM_PMIC_I2C in TRM) */ - i2c5_pins: i2c5-pins { - samsung,pins = "gpa3-5", "gpa3-6"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* I2C6 (also called MOTOR_I2C in TRM) */ - i2c6_pins: i2c6-pins { - samsung,pins = "gpa3-7", "gpa4-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI: UART_DEBUG_0 pins */ - uart0_pins: uart0-pins { - samsung,pins = "gpq0-0", "gpq0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - /* USI: UART_DEBUG_1 pins */ - uart1_pins: uart1-pins { - samsung,pins = "gpa3-7", "gpa4-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; -}; - -&pinctrl_cmgp { - gpm0: gpm0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - gpm1: gpm1-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - gpm2: gpm2-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - gpm3: gpm3-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - gpm4: gpm4-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - gpm5: gpm5-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - gpm6: gpm6-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - gpm7: gpm7-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gic>; - interrupts = ; - }; - - /* USI_CMGP0: HSI2C function */ - hsi2c3_pins: hsi2c3-pins { - samsung,pins = "gpm0-0", "gpm1-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI_CMGP0: UART function (4 pins, Auto Flow Control) */ - uart1_single_pins: uart1-single-pins { - samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - /* USI_CMGP0: UART function (2 pins, Non-Auto Flow Control) */ - uart1_dual_pins: uart1-dual-pins { - samsung,pins = "gpm0-0", "gpm1-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - /* USI_CMGP0: SPI function */ - spi1_pins: spi1-pins { - samsung,pins = "gpm0-0", "gpm1-0", "gpm2-0", "gpm3-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI_CMGP1: HSI2C function */ - hsi2c4_pins: hsi2c4-pins { - samsung,pins = "gpm4-0", "gpm5-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI_CMGP1: UART function (4 pins, Auto Flow Control) */ - uart2_single_pins: uart2-single-pins { - samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - /* USI_CMGP1: UART function (2 pins, Non-Auto Flow Control) */ - uart2_dual_pins: uart2-dual-pins { - samsung,pins = "gpm4-0", "gpm5-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - /* USI_CMGP1: SPI function */ - spi2_pins: spi2-pins { - samsung,pins = "gpm4-0", "gpm5-0", "gpm6-0", "gpm7-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; -}; - -&pinctrl_aud { - gpb0: gpb0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpb1: gpb1-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - aud_codec_mclk_pins: aud-codec-mclk-pins { - samsung,pins = "gpb0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - aud_codec_mclk_idle_pins: aud-codec-mclk-idle-pins { - samsung,pins = "gpb0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - aud_i2s0_pins: aud-i2s0-pins { - samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - aud_i2s0_idle_pins: aud-i2s0-idle-pins { - samsung,pins = "gpb0-1", "gpb0-2", "gpb0-3", "gpb0-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - aud_i2s1_pins: aud-i2s1-pins { - samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - aud_i2s1_idle_pins: aud-i2s1-idle-pins { - samsung,pins = "gpb1-0", "gpb1-1", "gpb1-2", "gpb1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - aud_fm_pins: aud-fm-pins { - samsung,pins = "gpb1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; - - aud_fm_idle_pins: aud-fm-idle-pins { - samsung,pins = "gpb1-4"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; -}; - -&pinctrl_hsi { - gpf2: gpf2-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - sd2_clk_pins: sd2-clk-pins { - samsung,pins = "gpf2-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd2_cmd_pins: sd2-cmd-pins { - samsung,pins = "gpf2-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd2_bus1_pins: sd2-bus1-pins { - samsung,pins = "gpf2-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd2_bus4_pins: sd2-bus4-pins { - samsung,pins = "gpf2-3", "gpf2-4", "gpf2-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd2_pdn_pins: sd2-pdn-pins { - samsung,pins = "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", - "gpf2-4", "gpf2-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; -}; - -&pinctrl_core { - gpf0: gpf0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpf1: gpf1-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - sd0_clk_pins: sd0-clk-pins { - samsung,pins = "gpf0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd0_cmd_pins: sd0-cmd-pins { - samsung,pins = "gpf0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd0_rdqs_pins: sd0-rdqs-pins { - samsung,pins = "gpf0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd0_nreset_pins: sd0-nreset-pins { - samsung,pins = "gpf0-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd0_bus1_pins: sd0-bus1-pins { - samsung,pins = "gpf1-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd0_bus4_pins: sd0-bus4-pins { - samsung,pins = "gpf1-1", "gpf1-2", "gpf1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sd0_bus8_pins: sd0-bus8-pins { - samsung,pins = "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; -}; - -&pinctrl_peri { - gpc0: gpc0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpc1: gpc1-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg0: gpg0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg1: gpg1-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg2: gpg2-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpg3: gpg3-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpp0: gpp0-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - gpp1: gpp1-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpp2: gpp2-gpio-bank { - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - sensor_mclk0_in_pins: sensor-mclk0-in-pins { - samsung,pins = "gpc0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk0_out_pins: sensor-mclk0-out-pins { - samsung,pins = "gpc0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk0_fn_pins: sensor-mclk0-fn-pins { - samsung,pins = "gpc0-0"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk1_in_pins: sensor-mclk1-in-pins { - samsung,pins = "gpc0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk1_out_pins: sensor-mclk1-out-pins { - samsung,pins = "gpc0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk1_fn_pins: sensor-mclk1-fn-pins { - samsung,pins = "gpc0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk2_in_pins: sensor-mclk2-in-pins { - samsung,pins = "gpc0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk2_out_pins: sensor-mclk2-out-pins { - samsung,pins = "gpc0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - sensor_mclk2_fn_pins: sensor-mclk2-fn-pins { - samsung,pins = "gpc0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI: HSI2C0 */ - hsi2c0_pins: hsi2c0-pins { - samsung,pins = "gpc1-0", "gpc1-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI: HSI2C1 */ - hsi2c1_pins: hsi2c1-pins { - samsung,pins = "gpc1-2", "gpc1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI: HSI2C2 */ - hsi2c2_pins: hsi2c2-pins { - samsung,pins = "gpc1-4", "gpc1-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - /* USI: SPI */ - spi0_pins: spi0-pins { - samsung,pins = "gpp2-0", "gpp2-1", "gpp2-2", "gpp2-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - i2c0_pins: i2c0-pins { - samsung,pins = "gpp0-0", "gpp0-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - i2c1_pins: i2c1-pins { - samsung,pins = "gpp0-2", "gpp0-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - i2c2_pins: i2c2-pins { - samsung,pins = "gpp0-4", "gpp0-5"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - i2c3_pins: i2c3-pins { - samsung,pins = "gpp1-0", "gpp1-1"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - i2c4_pins: i2c4-pins { - samsung,pins = "gpp1-2", "gpp1-3"; - samsung,pin-function = ; - samsung,pin-pud = ; - samsung,pin-drv = ; - }; - - xclkout_pins: xclkout-pins { - samsung,pins = "gpq0-2"; - samsung,pin-function = ; - samsung,pin-pud = ; - }; -}; diff --git a/arch/arm/dts/exynos850.dtsi b/arch/arm/dts/exynos850.dtsi deleted file mode 100644 index 53104e65b9c6..000000000000 --- a/arch/arm/dts/exynos850.dtsi +++ /dev/null @@ -1,809 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Samsung Exynos850 SoC device tree source - * - * Copyright (C) 2018 Samsung Electronics Co., Ltd. - * Copyright (C) 2021 Linaro Ltd. - * - * Samsung Exynos850 SoC device nodes are listed in this file. - * Exynos850 based board files can include this file and provide - * values for board specific bindings. - */ - -#include -#include -#include - -/ { - /* Also known under engineering name Exynos3830 */ - compatible = "samsung,exynos850"; - #address-cells = <2>; - #size-cells = <1>; - - interrupt-parent = <&gic>; - - aliases { - pinctrl0 = &pinctrl_alive; - pinctrl1 = &pinctrl_cmgp; - pinctrl2 = &pinctrl_aud; - pinctrl3 = &pinctrl_hsi; - pinctrl4 = &pinctrl_core; - pinctrl5 = &pinctrl_peri; - }; - - arm-pmu { - compatible = "arm,cortex-a55-pmu"; - interrupts = , - , - , - , - , - , - , - ; - interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>, - <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>; - }; - - /* Main system clock (XTCXO); external, must be 26 MHz */ - oscclk: clock-oscclk { - compatible = "fixed-clock"; - clock-output-names = "oscclk"; - #clock-cells = <0>; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu-map { - cluster0 { - core0 { - cpu = <&cpu0>; - }; - core1 { - cpu = <&cpu1>; - }; - core2 { - cpu = <&cpu2>; - }; - core3 { - cpu = <&cpu3>; - }; - }; - - cluster1 { - core0 { - cpu = <&cpu4>; - }; - core1 { - cpu = <&cpu5>; - }; - core2 { - cpu = <&cpu6>; - }; - core3 { - cpu = <&cpu7>; - }; - }; - }; - - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x0>; - enable-method = "psci"; - }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x1>; - enable-method = "psci"; - }; - cpu2: cpu@2 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x2>; - enable-method = "psci"; - }; - cpu3: cpu@3 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x3>; - enable-method = "psci"; - }; - cpu4: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x100>; - enable-method = "psci"; - }; - cpu5: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x101>; - enable-method = "psci"; - }; - cpu6: cpu@102 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x102>; - enable-method = "psci"; - }; - cpu7: cpu@103 { - device_type = "cpu"; - compatible = "arm,cortex-a55"; - reg = <0x103>; - enable-method = "psci"; - }; - }; - - psci { - compatible = "arm,psci-1.0"; - method = "smc"; - }; - - timer { - compatible = "arm,armv8-timer"; - /* Hypervisor Virtual Timer interrupt is not wired to GIC */ - interrupts = - , - , - , - ; - }; - - soc: soc@0 { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0x0 0x0 0x20000000>; - - chipid@10000000 { - compatible = "samsung,exynos850-chipid"; - reg = <0x10000000 0x100>; - }; - - timer@10040000 { - compatible = "samsung,exynos850-mct", - "samsung,exynos4210-mct"; - reg = <0x10040000 0x800>; - interrupts = , - , - , - , - , - , - , - , - , - , - , - ; - clocks = <&oscclk>, <&cmu_peri CLK_GOUT_MCT_PCLK>; - clock-names = "fin_pll", "mct"; - }; - - gic: interrupt-controller@12a01000 { - compatible = "arm,gic-400"; - #interrupt-cells = <3>; - #address-cells = <0>; - reg = <0x12a01000 0x1000>, - <0x12a02000 0x2000>, - <0x12a04000 0x2000>, - <0x12a06000 0x2000>; - interrupt-controller; - interrupts = ; - }; - - pmu_system_controller: system-controller@11860000 { - compatible = "samsung,exynos850-pmu", "syscon"; - reg = <0x11860000 0x10000>; - - reboot: syscon-reboot { - compatible = "syscon-reboot"; - regmap = <&pmu_system_controller>; - offset = <0x3a00>; /* SYSTEM_CONFIGURATION */ - mask = <0x2>; /* SWRESET_SYSTEM */ - value = <0x2>; /* reset value */ - }; - }; - - watchdog_cl0: watchdog@10050000 { - compatible = "samsung,exynos850-wdt"; - reg = <0x10050000 0x100>; - interrupts = ; - clocks = <&cmu_peri CLK_GOUT_WDT0_PCLK>, <&oscclk>; - clock-names = "watchdog", "watchdog_src"; - samsung,syscon-phandle = <&pmu_system_controller>; - samsung,cluster-index = <0>; - status = "disabled"; - }; - - watchdog_cl1: watchdog@10060000 { - compatible = "samsung,exynos850-wdt"; - reg = <0x10060000 0x100>; - interrupts = ; - clocks = <&cmu_peri CLK_GOUT_WDT1_PCLK>, <&oscclk>; - clock-names = "watchdog", "watchdog_src"; - samsung,syscon-phandle = <&pmu_system_controller>; - samsung,cluster-index = <1>; - status = "disabled"; - }; - - cmu_peri: clock-controller@10030000 { - compatible = "samsung,exynos850-cmu-peri"; - reg = <0x10030000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>, - <&cmu_top CLK_DOUT_PERI_UART>, - <&cmu_top CLK_DOUT_PERI_IP>; - clock-names = "oscclk", "dout_peri_bus", - "dout_peri_uart", "dout_peri_ip"; - }; - - cmu_g3d: clock-controller@11400000 { - compatible = "samsung,exynos850-cmu-g3d"; - reg = <0x11400000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_top CLK_DOUT_G3D_SWITCH>; - clock-names = "oscclk", "dout_g3d_switch"; - }; - - cmu_apm: clock-controller@11800000 { - compatible = "samsung,exynos850-cmu-apm"; - reg = <0x11800000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_top CLK_DOUT_CLKCMU_APM_BUS>; - clock-names = "oscclk", "dout_clkcmu_apm_bus"; - }; - - cmu_cmgp: clock-controller@11c00000 { - compatible = "samsung,exynos850-cmu-cmgp"; - reg = <0x11c00000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_apm CLK_GOUT_CLKCMU_CMGP_BUS>; - clock-names = "oscclk", "gout_clkcmu_cmgp_bus"; - }; - - cmu_core: clock-controller@12000000 { - compatible = "samsung,exynos850-cmu-core"; - reg = <0x12000000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_top CLK_DOUT_CORE_BUS>, - <&cmu_top CLK_DOUT_CORE_CCI>, - <&cmu_top CLK_DOUT_CORE_MMC_EMBD>, - <&cmu_top CLK_DOUT_CORE_SSS>; - clock-names = "oscclk", "dout_core_bus", - "dout_core_cci", "dout_core_mmc_embd", - "dout_core_sss"; - }; - - cmu_top: clock-controller@120e0000 { - compatible = "samsung,exynos850-cmu-top"; - reg = <0x120e0000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>; - clock-names = "oscclk"; - }; - - cmu_mfcmscl: clock-controller@12c00000 { - compatible = "samsung,exynos850-cmu-mfcmscl"; - reg = <0x12c00000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, - <&cmu_top CLK_DOUT_MFCMSCL_MFC>, - <&cmu_top CLK_DOUT_MFCMSCL_M2M>, - <&cmu_top CLK_DOUT_MFCMSCL_MCSC>, - <&cmu_top CLK_DOUT_MFCMSCL_JPEG>; - clock-names = "oscclk", "dout_mfcmscl_mfc", - "dout_mfcmscl_m2m", "dout_mfcmscl_mcsc", - "dout_mfcmscl_jpeg"; - }; - - cmu_dpu: clock-controller@13000000 { - compatible = "samsung,exynos850-cmu-dpu"; - reg = <0x13000000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_top CLK_DOUT_DPU>; - clock-names = "oscclk", "dout_dpu"; - }; - - cmu_hsi: clock-controller@13400000 { - compatible = "samsung,exynos850-cmu-hsi"; - reg = <0x13400000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, - <&cmu_top CLK_DOUT_HSI_BUS>, - <&cmu_top CLK_DOUT_HSI_MMC_CARD>, - <&cmu_top CLK_DOUT_HSI_USB20DRD>; - clock-names = "oscclk", "dout_hsi_bus", - "dout_hsi_mmc_card", "dout_hsi_usb20drd"; - }; - - cmu_is: clock-controller@14500000 { - compatible = "samsung,exynos850-cmu-is"; - reg = <0x14500000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, - <&cmu_top CLK_DOUT_IS_BUS>, - <&cmu_top CLK_DOUT_IS_ITP>, - <&cmu_top CLK_DOUT_IS_VRA>, - <&cmu_top CLK_DOUT_IS_GDC>; - clock-names = "oscclk", "dout_is_bus", "dout_is_itp", - "dout_is_vra", "dout_is_gdc"; - }; - - cmu_aud: clock-controller@14a00000 { - compatible = "samsung,exynos850-cmu-aud"; - reg = <0x14a00000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_top CLK_DOUT_AUD>; - clock-names = "oscclk", "dout_aud"; - }; - - pinctrl_alive: pinctrl@11850000 { - compatible = "samsung,exynos850-pinctrl"; - reg = <0x11850000 0x1000>; - - wakeup-interrupt-controller { - compatible = "samsung,exynos850-wakeup-eint"; - }; - }; - - pinctrl_cmgp: pinctrl@11c30000 { - compatible = "samsung,exynos850-pinctrl"; - reg = <0x11c30000 0x1000>; - - wakeup-interrupt-controller { - compatible = "samsung,exynos850-wakeup-eint"; - }; - }; - - pinctrl_core: pinctrl@12070000 { - compatible = "samsung,exynos850-pinctrl"; - reg = <0x12070000 0x1000>; - interrupts = ; - }; - - pinctrl_hsi: pinctrl@13430000 { - compatible = "samsung,exynos850-pinctrl"; - reg = <0x13430000 0x1000>; - interrupts = ; - }; - - pinctrl_peri: pinctrl@139b0000 { - compatible = "samsung,exynos850-pinctrl"; - reg = <0x139b0000 0x1000>; - interrupts = ; - }; - - pinctrl_aud: pinctrl@14a60000 { - compatible = "samsung,exynos850-pinctrl"; - reg = <0x14a60000 0x1000>; - }; - - rtc: rtc@11a30000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x11a30000 0x100>; - interrupts = , - ; - clocks = <&cmu_apm CLK_GOUT_RTC_PCLK>; - clock-names = "rtc"; - status = "disabled"; - }; - - mmc_0: mmc@12100000 { - compatible = "samsung,exynos7-dw-mshc-smu"; - reg = <0x12100000 0x2000>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu_core CLK_GOUT_MMC_EMBD_ACLK>, - <&cmu_core CLK_GOUT_MMC_EMBD_SDCLKIN>; - clock-names = "biu", "ciu"; - fifo-depth = <0x40>; - status = "disabled"; - }; - - i2c_0: i2c@13830000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13830000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - clocks = <&cmu_peri CLK_GOUT_I2C0_PCLK>; - clock-names = "i2c"; - status = "disabled"; - }; - - i2c_1: i2c@13840000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13840000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - clocks = <&cmu_peri CLK_GOUT_I2C1_PCLK>; - clock-names = "i2c"; - status = "disabled"; - }; - - i2c_2: i2c@13850000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13850000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - clocks = <&cmu_peri CLK_GOUT_I2C2_PCLK>; - clock-names = "i2c"; - status = "disabled"; - }; - - i2c_3: i2c@13860000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13860000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c3_pins>; - clocks = <&cmu_peri CLK_GOUT_I2C3_PCLK>; - clock-names = "i2c"; - status = "disabled"; - }; - - i2c_4: i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13870000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c4_pins>; - clocks = <&cmu_peri CLK_GOUT_I2C4_PCLK>; - clock-names = "i2c"; - status = "disabled"; - }; - - /* I2C_5 (also called CAM_PMIC_I2C in TRM) */ - i2c_5: i2c@13880000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13880000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c5_pins>; - clocks = <&cmu_peri CLK_GOUT_I2C5_PCLK>; - clock-names = "i2c"; - status = "disabled"; - }; - - /* I2C_6 (also called MOTOR_I2C in TRM) */ - i2c_6: i2c@13890000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13890000 0x100>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c6_pins>; - clocks = <&cmu_peri CLK_GOUT_I2C6_PCLK>; - clock-names = "i2c"; - status = "disabled"; - }; - - sysmmu_mfcmscl: sysmmu@12c50000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x12c50000 0x9000>; - interrupts = ; - clock-names = "sysmmu"; - clocks = <&cmu_mfcmscl CLK_GOUT_MFCMSCL_SYSMMU_CLK>; - #iommu-cells = <0>; - }; - - sysmmu_dpu: sysmmu@130c0000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x130c0000 0x9000>; - interrupts = ; - clock-names = "sysmmu"; - clocks = <&cmu_dpu CLK_GOUT_DPU_SMMU_CLK>; - #iommu-cells = <0>; - }; - - sysmmu_is0: sysmmu@14550000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14550000 0x9000>; - interrupts = ; - clock-names = "sysmmu"; - clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS0_CLK>; - #iommu-cells = <0>; - }; - - sysmmu_is1: sysmmu@14570000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14570000 0x9000>; - interrupts = ; - clock-names = "sysmmu"; - clocks = <&cmu_is CLK_GOUT_IS_SYSMMU_IS1_CLK>; - #iommu-cells = <0>; - }; - - sysmmu_aud: sysmmu@14850000 { - compatible = "samsung,exynos-sysmmu"; - reg = <0x14850000 0x9000>; - interrupts = ; - clock-names = "sysmmu"; - clocks = <&cmu_aud CLK_GOUT_AUD_SYSMMU_CLK>; - #iommu-cells = <0>; - }; - - sysreg_peri: syscon@10020000 { - compatible = "samsung,exynos850-peri-sysreg", - "samsung,exynos850-sysreg", "syscon"; - reg = <0x10020000 0x10000>; - clocks = <&cmu_peri CLK_GOUT_SYSREG_PERI_PCLK>; - }; - - sysreg_cmgp: syscon@11c20000 { - compatible = "samsung,exynos850-cmgp-sysreg", - "samsung,exynos850-sysreg", "syscon"; - reg = <0x11c20000 0x10000>; - clocks = <&cmu_cmgp CLK_GOUT_SYSREG_CMGP_PCLK>; - }; - - usbdrd: usb@13600000 { - compatible = "samsung,exynos850-dwusb3"; - ranges = <0x0 0x13600000 0x10000>; - clocks = <&cmu_hsi CLK_GOUT_USB_BUS_EARLY_CLK>, - <&cmu_hsi CLK_GOUT_USB_REF_CLK>; - clock-names = "bus_early", "ref"; - #address-cells = <1>; - #size-cells = <1>; - status = "disabled"; - - usbdrd_dwc3: usb@0 { - compatible = "snps,dwc3"; - reg = <0x0 0x10000>; - interrupts = ; - phys = <&usbdrd_phy 0>; - phy-names = "usb2-phy"; - }; - }; - - usbdrd_phy: phy@135d0000 { - compatible = "samsung,exynos850-usbdrd-phy"; - reg = <0x135d0000 0x100>; - clocks = <&cmu_hsi CLK_GOUT_USB_PHY_ACLK>, - <&cmu_hsi CLK_GOUT_USB_PHY_REF_CLK>; - clock-names = "phy", "ref"; - samsung,pmu-syscon = <&pmu_system_controller>; - #phy-cells = <1>; - status = "disabled"; - }; - - usi_uart: usi@138200c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x138200c0 0x20>; - samsung,sysreg = <&sysreg_peri 0x1010>; - samsung,mode = ; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_peri CLK_GOUT_UART_PCLK>, - <&cmu_peri CLK_GOUT_UART_IPCLK>; - clock-names = "pclk", "ipclk"; - status = "disabled"; - - serial_0: serial@13820000 { - compatible = "samsung,exynos850-uart"; - reg = <0x13820000 0xc0>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins>; - clocks = <&cmu_peri CLK_GOUT_UART_PCLK>, - <&cmu_peri CLK_GOUT_UART_IPCLK>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - }; - - usi_hsi2c_0: usi@138a00c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x138a00c0 0x20>; - samsung,sysreg = <&sysreg_peri 0x1020>; - samsung,mode = ; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_peri CLK_GOUT_HSI2C0_PCLK>, - <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>; - clock-names = "pclk", "ipclk"; - status = "disabled"; - - hsi2c_0: i2c@138a0000 { - compatible = "samsung,exynosautov9-hsi2c"; - reg = <0x138a0000 0xc0>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hsi2c0_pins>; - clocks = <&cmu_peri CLK_GOUT_HSI2C0_IPCLK>, - <&cmu_peri CLK_GOUT_HSI2C0_PCLK>; - clock-names = "hsi2c", "hsi2c_pclk"; - status = "disabled"; - }; - }; - - usi_hsi2c_1: usi@138b00c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x138b00c0 0x20>; - samsung,sysreg = <&sysreg_peri 0x1030>; - samsung,mode = ; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_peri CLK_GOUT_HSI2C1_PCLK>, - <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>; - clock-names = "pclk", "ipclk"; - status = "disabled"; - - hsi2c_1: i2c@138b0000 { - compatible = "samsung,exynosautov9-hsi2c"; - reg = <0x138b0000 0xc0>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hsi2c1_pins>; - clocks = <&cmu_peri CLK_GOUT_HSI2C1_IPCLK>, - <&cmu_peri CLK_GOUT_HSI2C1_PCLK>; - clock-names = "hsi2c", "hsi2c_pclk"; - status = "disabled"; - }; - }; - - usi_hsi2c_2: usi@138c00c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x138c00c0 0x20>; - samsung,sysreg = <&sysreg_peri 0x1040>; - samsung,mode = ; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_peri CLK_GOUT_HSI2C2_PCLK>, - <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>; - clock-names = "pclk", "ipclk"; - status = "disabled"; - - hsi2c_2: i2c@138c0000 { - compatible = "samsung,exynosautov9-hsi2c"; - reg = <0x138c0000 0xc0>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hsi2c2_pins>; - clocks = <&cmu_peri CLK_GOUT_HSI2C2_IPCLK>, - <&cmu_peri CLK_GOUT_HSI2C2_PCLK>; - clock-names = "hsi2c", "hsi2c_pclk"; - status = "disabled"; - }; - }; - - usi_spi_0: usi@139400c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x139400c0 0x20>; - samsung,sysreg = <&sysreg_peri 0x1050>; - samsung,mode = ; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_peri CLK_GOUT_SPI0_PCLK>, - <&cmu_peri CLK_GOUT_SPI0_IPCLK>; - clock-names = "pclk", "ipclk"; - status = "disabled"; - }; - - usi_cmgp0: usi@11d000c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x11d000c0 0x20>; - samsung,sysreg = <&sysreg_cmgp 0x2000>; - samsung,mode = ; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>, - <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>; - clock-names = "pclk", "ipclk"; - status = "disabled"; - - hsi2c_3: i2c@11d00000 { - compatible = "samsung,exynosautov9-hsi2c"; - reg = <0x11d00000 0xc0>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hsi2c3_pins>; - clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>, - <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>; - clock-names = "hsi2c", "hsi2c_pclk"; - status = "disabled"; - }; - - serial_1: serial@11d00000 { - compatible = "samsung,exynos850-uart"; - reg = <0x11d00000 0xc0>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&uart1_single_pins>; - clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI0_PCLK>, - <&cmu_cmgp CLK_GOUT_CMGP_USI0_IPCLK>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - }; - - usi_cmgp1: usi@11d200c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x11d200c0 0x20>; - samsung,sysreg = <&sysreg_cmgp 0x2010>; - samsung,mode = ; - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>, - <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>; - clock-names = "pclk", "ipclk"; - status = "disabled"; - - hsi2c_4: i2c@11d20000 { - compatible = "samsung,exynosautov9-hsi2c"; - reg = <0x11d20000 0xc0>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&hsi2c4_pins>; - clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>, - <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>; - clock-names = "hsi2c", "hsi2c_pclk"; - status = "disabled"; - }; - - serial_2: serial@11d20000 { - compatible = "samsung,exynos850-uart"; - reg = <0x11d20000 0xc0>; - interrupts = ; - pinctrl-names = "default"; - pinctrl-0 = <&uart2_single_pins>; - clocks = <&cmu_cmgp CLK_GOUT_CMGP_USI1_PCLK>, - <&cmu_cmgp CLK_GOUT_CMGP_USI1_IPCLK>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - }; - }; -}; - -#include "exynos850-pinctrl.dtsi" diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index af00ee1db07a..cad8bb044cf0 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -249,6 +249,7 @@ config TARGET_E850_96 select OF_CONTROL select PINCTRL select PINCTRL_EXYNOS850 + imply OF_UPSTREAM endchoice endif diff --git a/configs/e850-96_defconfig b/configs/e850-96_defconfig index bb41635ff784..38b9968c1671 100644 --- a/configs/e850-96_defconfig +++ b/configs/e850-96_defconfig @@ -7,7 +7,7 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000 CONFIG_ARCH_EXYNOS9=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xf8c00000 -CONFIG_DEFAULT_DEVICE_TREE="exynos850-e850-96" +CONFIG_DEFAULT_DEVICE_TREE="exynos/exynos850-e850-96" CONFIG_SYS_LOAD_ADDR=0x80000000 # CONFIG_AUTOBOOT is not set # CONFIG_DISPLAY_CPUINFO is not set diff --git a/doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml b/doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml deleted file mode 100644 index a0906efe1223..000000000000 --- a/doc/device-tree-bindings/clock/samsung,exynos850-clock.yaml +++ /dev/null @@ -1,307 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/clock/samsung,exynos850-clock.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Samsung Exynos850 SoC clock controller - -maintainers: - - Sam Protsenko - -description: | - Exynos850 clock controller is comprised of several CMU units, generating - clocks for different domains. Those CMU units are modeled as separate device - tree nodes, and might depend on each other. Root clocks in that clock tree are - two external clocks:: OSCCLK (26 MHz) and RTCCLK (32768 Hz). Those external - clocks must be defined as fixed-rate clocks in dts. - - CMU_TOP is a top-level CMU, where all base clocks are prepared using PLLs and - dividers; all other leaf clocks (other CMUs) are usually derived from CMU_TOP. - - Each clock is assigned an identifier and client nodes can use this identifier - to specify the clock which they consume. All clocks available for usage - in clock consumer nodes are defined as preprocessor macros in - 'dt-bindings/clock/exynos850.h' header. - -properties: - compatible: - enum: - - samsung,exynos850-cmu-top - - samsung,exynos850-cmu-apm - - samsung,exynos850-cmu-aud - - samsung,exynos850-cmu-cmgp - - samsung,exynos850-cmu-core - - samsung,exynos850-cmu-dpu - - samsung,exynos850-cmu-g3d - - samsung,exynos850-cmu-hsi - - samsung,exynos850-cmu-is - - samsung,exynos850-cmu-mfcmscl - - samsung,exynos850-cmu-peri - - clocks: - minItems: 1 - maxItems: 5 - - clock-names: - minItems: 1 - maxItems: 5 - - "#clock-cells": - const: 1 - - reg: - maxItems: 1 - -allOf: - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-top - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - clock-names: - items: - - const: oscclk - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-apm - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: CMU_APM bus clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_clkcmu_apm_bus - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-aud - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: AUD clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_aud - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-cmgp - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: CMU_CMGP bus clock (from CMU_APM) - - clock-names: - items: - - const: oscclk - - const: gout_clkcmu_cmgp_bus - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-core - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: CMU_CORE bus clock (from CMU_TOP) - - description: CCI clock (from CMU_TOP) - - description: eMMC clock (from CMU_TOP) - - description: SSS clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_core_bus - - const: dout_core_cci - - const: dout_core_mmc_embd - - const: dout_core_sss - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-dpu - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: DPU clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_dpu - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-g3d - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: G3D clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_g3d_switch - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-hsi - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: External RTC clock (32768 Hz) - - description: CMU_HSI bus clock (from CMU_TOP) - - description: SD card clock (from CMU_TOP) - - description: USB 2.0 DRD clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: rtcclk - - const: dout_hsi_bus - - const: dout_hsi_mmc_card - - const: dout_hsi_usb20drd - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-is - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: CMU_IS bus clock (from CMU_TOP) - - description: Image Texture Processing core clock (from CMU_TOP) - - description: Visual Recognition Accelerator clock (from CMU_TOP) - - description: Geometric Distortion Correction clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_is_bus - - const: dout_is_itp - - const: dout_is_vra - - const: dout_is_gdc - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-mfcmscl - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: Multi-Format Codec clock (from CMU_TOP) - - description: Memory to Memory Scaler clock (from CMU_TOP) - - description: Multi-Channel Scaler clock (from CMU_TOP) - - description: JPEG codec clock (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_mfcmscl_mfc - - const: dout_mfcmscl_m2m - - const: dout_mfcmscl_mcsc - - const: dout_mfcmscl_jpeg - - - if: - properties: - compatible: - contains: - const: samsung,exynos850-cmu-peri - - then: - properties: - clocks: - items: - - description: External reference clock (26 MHz) - - description: CMU_PERI bus clock (from CMU_TOP) - - description: UART clock (from CMU_TOP) - - description: Parent clock for HSI2C and SPI (from CMU_TOP) - - clock-names: - items: - - const: oscclk - - const: dout_peri_bus - - const: dout_peri_uart - - const: dout_peri_ip - -required: - - compatible - - "#clock-cells" - - clocks - - clock-names - - reg - -additionalProperties: false - -examples: - # Clock controller node for CMU_PERI - - | - #include - - cmu_peri: clock-controller@10030000 { - compatible = "samsung,exynos850-cmu-peri"; - reg = <0x10030000 0x8000>; - #clock-cells = <1>; - - clocks = <&oscclk>, <&cmu_top CLK_DOUT_PERI_BUS>, - <&cmu_top CLK_DOUT_PERI_UART>, - <&cmu_top CLK_DOUT_PERI_IP>; - clock-names = "oscclk", "dout_peri_bus", - "dout_peri_uart", "dout_peri_ip"; - }; - -... diff --git a/doc/device-tree-bindings/soc/samsung/exynos-usi.yaml b/doc/device-tree-bindings/soc/samsung/exynos-usi.yaml deleted file mode 100644 index 8e6423f11568..000000000000 --- a/doc/device-tree-bindings/soc/samsung/exynos-usi.yaml +++ /dev/null @@ -1,162 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/soc/samsung/exynos-usi.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Samsung's Exynos USI (Universal Serial Interface) - -maintainers: - - Sam Protsenko - -description: | - USI IP-core provides selectable serial protocol (UART, SPI or High-Speed I2C). - USI shares almost all internal circuits within each protocol, so only one - protocol can be chosen at a time. USI is modeled as a node with zero or more - child nodes, each representing a serial sub-node device. The mode setting - selects which particular function will be used. - -properties: - $nodename: - pattern: "^usi@[0-9a-f]+$" - - compatible: - enum: - - samsung,exynos850-usi - - reg: true - - clocks: true - - clock-names: true - - ranges: true - - "#address-cells": - const: 1 - - "#size-cells": - const: 1 - - samsung,sysreg: - $ref: /schemas/types.yaml#/definitions/phandle-array - items: - - items: - - description: phandle to System Register syscon node - - description: offset of SW_CONF register for this USI controller - description: - Should be phandle/offset pair. The phandle to System Register syscon node - (for the same domain where this USI controller resides) and the offset - of SW_CONF register for this USI controller. - - samsung,mode: - $ref: /schemas/types.yaml#/definitions/uint32 - description: - Selects USI function (which serial protocol to use). Refer to - for valid USI mode values. - - samsung,clkreq-on: - type: boolean - description: - Enable this property if underlying protocol requires the clock to be - continuously provided without automatic gating. As suggested by SoC - manual, it should be set in case of SPI/I2C slave, UART Rx and I2C - multi-master mode. Usually this property is needed if USI mode is set - to "UART". - - This property is optional. - -patternProperties: - "^i2c@[0-9a-f]+$": - $ref: /schemas/i2c/i2c-exynos5.yaml - description: Child node describing underlying I2C - - "^serial@[0-9a-f]+$": - $ref: /schemas/serial/samsung_uart.yaml - description: Child node describing underlying UART/serial - - "^spi@[0-9a-f]+$": - $ref: /schemas/spi/samsung,spi.yaml - description: Child node describing underlying SPI - -required: - - compatible - - ranges - - "#address-cells" - - "#size-cells" - - samsung,sysreg - - samsung,mode - -if: - properties: - compatible: - contains: - enum: - - samsung,exynos850-usi - -then: - properties: - reg: - maxItems: 1 - - clocks: - items: - - description: Bus (APB) clock - - description: Operating clock for UART/SPI/I2C protocol - - clock-names: - items: - - const: pclk - - const: ipclk - - required: - - reg - - clocks - - clock-names - -else: - properties: - reg: false - clocks: false - clock-names: false - samsung,clkreq-on: false - -additionalProperties: false - -examples: - - | - #include - #include - - usi0: usi@138200c0 { - compatible = "samsung,exynos850-usi"; - reg = <0x138200c0 0x20>; - samsung,sysreg = <&sysreg_peri 0x1010>; - samsung,mode = ; - samsung,clkreq-on; /* needed for UART mode */ - #address-cells = <1>; - #size-cells = <1>; - ranges; - clocks = <&cmu_peri 32>, <&cmu_peri 31>; - clock-names = "pclk", "ipclk"; - - serial_0: serial@13820000 { - compatible = "samsung,exynos850-uart"; - reg = <0x13820000 0xc0>; - interrupts = ; - clocks = <&cmu_peri 32>, <&cmu_peri 31>; - clock-names = "uart", "clk_uart_baud0"; - status = "disabled"; - }; - - hsi2c_0: i2c@13820000 { - compatible = "samsung,exynosautov9-hsi2c"; - reg = <0x13820000 0xc0>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&cmu_peri 31>, <&cmu_peri 32>; - clock-names = "hsi2c", "hsi2c_pclk"; - status = "disabled"; - }; - }; diff --git a/include/dt-bindings/clock/exynos850.h b/include/dt-bindings/clock/exynos850.h deleted file mode 100644 index 3090e09c9a55..000000000000 --- a/include/dt-bindings/clock/exynos850.h +++ /dev/null @@ -1,337 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ -/* - * Copyright (C) 2021 Linaro Ltd. - * Author: Sam Protsenko - * - * Device Tree binding constants for Exynos850 clock controller. - */ - -#ifndef _DT_BINDINGS_CLOCK_EXYNOS_850_H -#define _DT_BINDINGS_CLOCK_EXYNOS_850_H - -/* CMU_TOP */ -#define CLK_FOUT_SHARED0_PLL 1 -#define CLK_FOUT_SHARED1_PLL 2 -#define CLK_FOUT_MMC_PLL 3 -#define CLK_MOUT_SHARED0_PLL 4 -#define CLK_MOUT_SHARED1_PLL 5 -#define CLK_MOUT_MMC_PLL 6 -#define CLK_MOUT_CORE_BUS 7 -#define CLK_MOUT_CORE_CCI 8 -#define CLK_MOUT_CORE_MMC_EMBD 9 -#define CLK_MOUT_CORE_SSS 10 -#define CLK_MOUT_DPU 11 -#define CLK_MOUT_HSI_BUS 12 -#define CLK_MOUT_HSI_MMC_CARD 13 -#define CLK_MOUT_HSI_USB20DRD 14 -#define CLK_MOUT_PERI_BUS 15 -#define CLK_MOUT_PERI_UART 16 -#define CLK_MOUT_PERI_IP 17 -#define CLK_DOUT_SHARED0_DIV3 18 -#define CLK_DOUT_SHARED0_DIV2 19 -#define CLK_DOUT_SHARED1_DIV3 20 -#define CLK_DOUT_SHARED1_DIV2 21 -#define CLK_DOUT_SHARED0_DIV4 22 -#define CLK_DOUT_SHARED1_DIV4 23 -#define CLK_DOUT_CORE_BUS 24 -#define CLK_DOUT_CORE_CCI 25 -#define CLK_DOUT_CORE_MMC_EMBD 26 -#define CLK_DOUT_CORE_SSS 27 -#define CLK_DOUT_DPU 28 -#define CLK_DOUT_HSI_BUS 29 -#define CLK_DOUT_HSI_MMC_CARD 30 -#define CLK_DOUT_HSI_USB20DRD 31 -#define CLK_DOUT_PERI_BUS 32 -#define CLK_DOUT_PERI_UART 33 -#define CLK_DOUT_PERI_IP 34 -#define CLK_GOUT_CORE_BUS 35 -#define CLK_GOUT_CORE_CCI 36 -#define CLK_GOUT_CORE_MMC_EMBD 37 -#define CLK_GOUT_CORE_SSS 38 -#define CLK_GOUT_DPU 39 -#define CLK_GOUT_HSI_BUS 40 -#define CLK_GOUT_HSI_MMC_CARD 41 -#define CLK_GOUT_HSI_USB20DRD 42 -#define CLK_GOUT_PERI_BUS 43 -#define CLK_GOUT_PERI_UART 44 -#define CLK_GOUT_PERI_IP 45 -#define CLK_MOUT_CLKCMU_APM_BUS 46 -#define CLK_DOUT_CLKCMU_APM_BUS 47 -#define CLK_GOUT_CLKCMU_APM_BUS 48 -#define CLK_MOUT_AUD 49 -#define CLK_GOUT_AUD 50 -#define CLK_DOUT_AUD 51 -#define CLK_MOUT_IS_BUS 52 -#define CLK_MOUT_IS_ITP 53 -#define CLK_MOUT_IS_VRA 54 -#define CLK_MOUT_IS_GDC 55 -#define CLK_GOUT_IS_BUS 56 -#define CLK_GOUT_IS_ITP 57 -#define CLK_GOUT_IS_VRA 58 -#define CLK_GOUT_IS_GDC 59 -#define CLK_DOUT_IS_BUS 60 -#define CLK_DOUT_IS_ITP 61 -#define CLK_DOUT_IS_VRA 62 -#define CLK_DOUT_IS_GDC 63 -#define CLK_MOUT_MFCMSCL_MFC 64 -#define CLK_MOUT_MFCMSCL_M2M 65 -#define CLK_MOUT_MFCMSCL_MCSC 66 -#define CLK_MOUT_MFCMSCL_JPEG 67 -#define CLK_GOUT_MFCMSCL_MFC 68 -#define CLK_GOUT_MFCMSCL_M2M 69 -#define CLK_GOUT_MFCMSCL_MCSC 70 -#define CLK_GOUT_MFCMSCL_JPEG 71 -#define CLK_DOUT_MFCMSCL_MFC 72 -#define CLK_DOUT_MFCMSCL_M2M 73 -#define CLK_DOUT_MFCMSCL_MCSC 74 -#define CLK_DOUT_MFCMSCL_JPEG 75 -#define CLK_MOUT_G3D_SWITCH 76 -#define CLK_GOUT_G3D_SWITCH 77 -#define CLK_DOUT_G3D_SWITCH 78 - -/* CMU_APM */ -#define CLK_RCO_I3C_PMIC 1 -#define OSCCLK_RCO_APM 2 -#define CLK_RCO_APM__ALV 3 -#define CLK_DLL_DCO 4 -#define CLK_MOUT_APM_BUS_USER 5 -#define CLK_MOUT_RCO_APM_I3C_USER 6 -#define CLK_MOUT_RCO_APM_USER 7 -#define CLK_MOUT_DLL_USER 8 -#define CLK_MOUT_CLKCMU_CHUB_BUS 9 -#define CLK_MOUT_APM_BUS 10 -#define CLK_MOUT_APM_I3C 11 -#define CLK_DOUT_CLKCMU_CHUB_BUS 12 -#define CLK_DOUT_APM_BUS 13 -#define CLK_DOUT_APM_I3C 14 -#define CLK_GOUT_CLKCMU_CMGP_BUS 15 -#define CLK_GOUT_CLKCMU_CHUB_BUS 16 -#define CLK_GOUT_RTC_PCLK 17 -#define CLK_GOUT_TOP_RTC_PCLK 18 -#define CLK_GOUT_I3C_PCLK 19 -#define CLK_GOUT_I3C_SCLK 20 -#define CLK_GOUT_SPEEDY_PCLK 21 -#define CLK_GOUT_GPIO_ALIVE_PCLK 22 -#define CLK_GOUT_PMU_ALIVE_PCLK 23 -#define CLK_GOUT_SYSREG_APM_PCLK 24 - -/* CMU_AUD */ -#define CLK_DOUT_AUD_AUDIF 1 -#define CLK_DOUT_AUD_BUSD 2 -#define CLK_DOUT_AUD_BUSP 3 -#define CLK_DOUT_AUD_CNT 4 -#define CLK_DOUT_AUD_CPU 5 -#define CLK_DOUT_AUD_CPU_ACLK 6 -#define CLK_DOUT_AUD_CPU_PCLKDBG 7 -#define CLK_DOUT_AUD_FM 8 -#define CLK_DOUT_AUD_FM_SPDY 9 -#define CLK_DOUT_AUD_MCLK 10 -#define CLK_DOUT_AUD_UAIF0 11 -#define CLK_DOUT_AUD_UAIF1 12 -#define CLK_DOUT_AUD_UAIF2 13 -#define CLK_DOUT_AUD_UAIF3 14 -#define CLK_DOUT_AUD_UAIF4 15 -#define CLK_DOUT_AUD_UAIF5 16 -#define CLK_DOUT_AUD_UAIF6 17 -#define CLK_FOUT_AUD_PLL 18 -#define CLK_GOUT_AUD_ABOX_ACLK 19 -#define CLK_GOUT_AUD_ASB_CCLK 20 -#define CLK_GOUT_AUD_CA32_CCLK 21 -#define CLK_GOUT_AUD_CNT_BCLK 22 -#define CLK_GOUT_AUD_CODEC_MCLK 23 -#define CLK_GOUT_AUD_DAP_CCLK 24 -#define CLK_GOUT_AUD_GPIO_PCLK 25 -#define CLK_GOUT_AUD_PPMU_ACLK 26 -#define CLK_GOUT_AUD_PPMU_PCLK 27 -#define CLK_GOUT_AUD_SPDY_BCLK 28 -#define CLK_GOUT_AUD_SYSMMU_CLK 29 -#define CLK_GOUT_AUD_SYSREG_PCLK 30 -#define CLK_GOUT_AUD_TZPC_PCLK 31 -#define CLK_GOUT_AUD_UAIF0_BCLK 32 -#define CLK_GOUT_AUD_UAIF1_BCLK 33 -#define CLK_GOUT_AUD_UAIF2_BCLK 34 -#define CLK_GOUT_AUD_UAIF3_BCLK 35 -#define CLK_GOUT_AUD_UAIF4_BCLK 36 -#define CLK_GOUT_AUD_UAIF5_BCLK 37 -#define CLK_GOUT_AUD_UAIF6_BCLK 38 -#define CLK_GOUT_AUD_WDT_PCLK 39 -#define CLK_MOUT_AUD_CPU 40 -#define CLK_MOUT_AUD_CPU_HCH 41 -#define CLK_MOUT_AUD_CPU_USER 42 -#define CLK_MOUT_AUD_FM 43 -#define CLK_MOUT_AUD_PLL 44 -#define CLK_MOUT_AUD_TICK_USB_USER 45 -#define CLK_MOUT_AUD_UAIF0 46 -#define CLK_MOUT_AUD_UAIF1 47 -#define CLK_MOUT_AUD_UAIF2 48 -#define CLK_MOUT_AUD_UAIF3 49 -#define CLK_MOUT_AUD_UAIF4 50 -#define CLK_MOUT_AUD_UAIF5 51 -#define CLK_MOUT_AUD_UAIF6 52 -#define IOCLK_AUDIOCDCLK0 53 -#define IOCLK_AUDIOCDCLK1 54 -#define IOCLK_AUDIOCDCLK2 55 -#define IOCLK_AUDIOCDCLK3 56 -#define IOCLK_AUDIOCDCLK4 57 -#define IOCLK_AUDIOCDCLK5 58 -#define IOCLK_AUDIOCDCLK6 59 -#define TICK_USB 60 -#define CLK_GOUT_AUD_CMU_AUD_PCLK 61 - -/* CMU_CMGP */ -#define CLK_RCO_CMGP 1 -#define CLK_MOUT_CMGP_ADC 2 -#define CLK_MOUT_CMGP_USI0 3 -#define CLK_MOUT_CMGP_USI1 4 -#define CLK_DOUT_CMGP_ADC 5 -#define CLK_DOUT_CMGP_USI0 6 -#define CLK_DOUT_CMGP_USI1 7 -#define CLK_GOUT_CMGP_ADC_S0_PCLK 8 -#define CLK_GOUT_CMGP_ADC_S1_PCLK 9 -#define CLK_GOUT_CMGP_GPIO_PCLK 10 -#define CLK_GOUT_CMGP_USI0_IPCLK 11 -#define CLK_GOUT_CMGP_USI0_PCLK 12 -#define CLK_GOUT_CMGP_USI1_IPCLK 13 -#define CLK_GOUT_CMGP_USI1_PCLK 14 -#define CLK_GOUT_SYSREG_CMGP_PCLK 15 - -/* CMU_G3D */ -#define CLK_FOUT_G3D_PLL 1 -#define CLK_MOUT_G3D_PLL 2 -#define CLK_MOUT_G3D_SWITCH_USER 3 -#define CLK_MOUT_G3D_BUSD 4 -#define CLK_DOUT_G3D_BUSP 5 -#define CLK_GOUT_G3D_CMU_G3D_PCLK 6 -#define CLK_GOUT_G3D_GPU_CLK 7 -#define CLK_GOUT_G3D_TZPC_PCLK 8 -#define CLK_GOUT_G3D_GRAY2BIN_CLK 9 -#define CLK_GOUT_G3D_BUSD_CLK 10 -#define CLK_GOUT_G3D_BUSP_CLK 11 -#define CLK_GOUT_G3D_SYSREG_PCLK 12 - -/* CMU_HSI */ -#define CLK_MOUT_HSI_BUS_USER 1 -#define CLK_MOUT_HSI_MMC_CARD_USER 2 -#define CLK_MOUT_HSI_USB20DRD_USER 3 -#define CLK_MOUT_HSI_RTC 4 -#define CLK_GOUT_USB_RTC_CLK 5 -#define CLK_GOUT_USB_REF_CLK 6 -#define CLK_GOUT_USB_PHY_REF_CLK 7 -#define CLK_GOUT_USB_PHY_ACLK 8 -#define CLK_GOUT_USB_BUS_EARLY_CLK 9 -#define CLK_GOUT_GPIO_HSI_PCLK 10 -#define CLK_GOUT_MMC_CARD_ACLK 11 -#define CLK_GOUT_MMC_CARD_SDCLKIN 12 -#define CLK_GOUT_SYSREG_HSI_PCLK 13 -#define CLK_GOUT_HSI_PPMU_ACLK 14 -#define CLK_GOUT_HSI_PPMU_PCLK 15 -#define CLK_GOUT_HSI_CMU_HSI_PCLK 16 - -/* CMU_IS */ -#define CLK_MOUT_IS_BUS_USER 1 -#define CLK_MOUT_IS_ITP_USER 2 -#define CLK_MOUT_IS_VRA_USER 3 -#define CLK_MOUT_IS_GDC_USER 4 -#define CLK_DOUT_IS_BUSP 5 -#define CLK_GOUT_IS_CMU_IS_PCLK 6 -#define CLK_GOUT_IS_CSIS0_ACLK 7 -#define CLK_GOUT_IS_CSIS1_ACLK 8 -#define CLK_GOUT_IS_CSIS2_ACLK 9 -#define CLK_GOUT_IS_TZPC_PCLK 10 -#define CLK_GOUT_IS_CSIS_DMA_CLK 11 -#define CLK_GOUT_IS_GDC_CLK 12 -#define CLK_GOUT_IS_IPP_CLK 13 -#define CLK_GOUT_IS_ITP_CLK 14 -#define CLK_GOUT_IS_MCSC_CLK 15 -#define CLK_GOUT_IS_VRA_CLK 16 -#define CLK_GOUT_IS_PPMU_IS0_ACLK 17 -#define CLK_GOUT_IS_PPMU_IS0_PCLK 18 -#define CLK_GOUT_IS_PPMU_IS1_ACLK 19 -#define CLK_GOUT_IS_PPMU_IS1_PCLK 20 -#define CLK_GOUT_IS_SYSMMU_IS0_CLK 21 -#define CLK_GOUT_IS_SYSMMU_IS1_CLK 22 -#define CLK_GOUT_IS_SYSREG_PCLK 23 - -/* CMU_MFCMSCL */ -#define CLK_MOUT_MFCMSCL_MFC_USER 1 -#define CLK_MOUT_MFCMSCL_M2M_USER 2 -#define CLK_MOUT_MFCMSCL_MCSC_USER 3 -#define CLK_MOUT_MFCMSCL_JPEG_USER 4 -#define CLK_DOUT_MFCMSCL_BUSP 5 -#define CLK_GOUT_MFCMSCL_CMU_MFCMSCL_PCLK 6 -#define CLK_GOUT_MFCMSCL_TZPC_PCLK 7 -#define CLK_GOUT_MFCMSCL_JPEG_ACLK 8 -#define CLK_GOUT_MFCMSCL_M2M_ACLK 9 -#define CLK_GOUT_MFCMSCL_MCSC_CLK 10 -#define CLK_GOUT_MFCMSCL_MFC_ACLK 11 -#define CLK_GOUT_MFCMSCL_PPMU_ACLK 12 -#define CLK_GOUT_MFCMSCL_PPMU_PCLK 13 -#define CLK_GOUT_MFCMSCL_SYSMMU_CLK 14 -#define CLK_GOUT_MFCMSCL_SYSREG_PCLK 15 - -/* CMU_PERI */ -#define CLK_MOUT_PERI_BUS_USER 1 -#define CLK_MOUT_PERI_UART_USER 2 -#define CLK_MOUT_PERI_HSI2C_USER 3 -#define CLK_MOUT_PERI_SPI_USER 4 -#define CLK_DOUT_PERI_HSI2C0 5 -#define CLK_DOUT_PERI_HSI2C1 6 -#define CLK_DOUT_PERI_HSI2C2 7 -#define CLK_DOUT_PERI_SPI0 8 -#define CLK_GOUT_PERI_HSI2C0 9 -#define CLK_GOUT_PERI_HSI2C1 10 -#define CLK_GOUT_PERI_HSI2C2 11 -#define CLK_GOUT_GPIO_PERI_PCLK 12 -#define CLK_GOUT_HSI2C0_IPCLK 13 -#define CLK_GOUT_HSI2C0_PCLK 14 -#define CLK_GOUT_HSI2C1_IPCLK 15 -#define CLK_GOUT_HSI2C1_PCLK 16 -#define CLK_GOUT_HSI2C2_IPCLK 17 -#define CLK_GOUT_HSI2C2_PCLK 18 -#define CLK_GOUT_I2C0_PCLK 19 -#define CLK_GOUT_I2C1_PCLK 20 -#define CLK_GOUT_I2C2_PCLK 21 -#define CLK_GOUT_I2C3_PCLK 22 -#define CLK_GOUT_I2C4_PCLK 23 -#define CLK_GOUT_I2C5_PCLK 24 -#define CLK_GOUT_I2C6_PCLK 25 -#define CLK_GOUT_MCT_PCLK 26 -#define CLK_GOUT_PWM_MOTOR_PCLK 27 -#define CLK_GOUT_SPI0_IPCLK 28 -#define CLK_GOUT_SPI0_PCLK 29 -#define CLK_GOUT_SYSREG_PERI_PCLK 30 -#define CLK_GOUT_UART_IPCLK 31 -#define CLK_GOUT_UART_PCLK 32 -#define CLK_GOUT_WDT0_PCLK 33 -#define CLK_GOUT_WDT1_PCLK 34 - -/* CMU_CORE */ -#define CLK_MOUT_CORE_BUS_USER 1 -#define CLK_MOUT_CORE_CCI_USER 2 -#define CLK_MOUT_CORE_MMC_EMBD_USER 3 -#define CLK_MOUT_CORE_SSS_USER 4 -#define CLK_MOUT_CORE_GIC 5 -#define CLK_DOUT_CORE_BUSP 6 -#define CLK_GOUT_CCI_ACLK 7 -#define CLK_GOUT_GIC_CLK 8 -#define CLK_GOUT_MMC_EMBD_ACLK 9 -#define CLK_GOUT_MMC_EMBD_SDCLKIN 10 -#define CLK_GOUT_SSS_ACLK 11 -#define CLK_GOUT_SSS_PCLK 12 -#define CLK_GOUT_GPIO_CORE_PCLK 13 -#define CLK_GOUT_SYSREG_CORE_PCLK 14 - -/* CMU_DPU */ -#define CLK_MOUT_DPU_USER 1 -#define CLK_DOUT_DPU_BUSP 2 -#define CLK_GOUT_DPU_CMU_DPU_PCLK 3 -#define CLK_GOUT_DPU_DECON0_ACLK 4 -#define CLK_GOUT_DPU_DMA_ACLK 5 -#define CLK_GOUT_DPU_DPP_ACLK 6 -#define CLK_GOUT_DPU_PPMU_ACLK 7 -#define CLK_GOUT_DPU_PPMU_PCLK 8 -#define CLK_GOUT_DPU_SMMU_CLK 9 -#define CLK_GOUT_DPU_SYSREG_PCLK 10 -#define DPU_NR_CLK 11 - -#endif /* _DT_BINDINGS_CLOCK_EXYNOS_850_H */ diff --git a/include/dt-bindings/soc/samsung,exynos-usi.h b/include/dt-bindings/soc/samsung,exynos-usi.h deleted file mode 100644 index a01af169d249..000000000000 --- a/include/dt-bindings/soc/samsung,exynos-usi.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ -/* - * Copyright (c) 2021 Linaro Ltd. - * Author: Sam Protsenko - * - * Device Tree bindings for Samsung Exynos USI (Universal Serial Interface). - */ - -#ifndef __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H -#define __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H - -#define USI_V2_NONE 0 -#define USI_V2_UART 1 -#define USI_V2_SPI 2 -#define USI_V2_I2C 3 - -#endif /* __DT_BINDINGS_SAMSUNG_EXYNOS_USI_H */