From patchwork Wed Dec 13 17:13:15 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 753706 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="vRf3GCAm" Received: from mail-wm1-x32f.google.com (mail-wm1-x32f.google.com [IPv6:2a00:1450:4864:20::32f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7A1E7F3 for ; Wed, 13 Dec 2023 09:13:23 -0800 (PST) Received: by mail-wm1-x32f.google.com with SMTP id 5b1f17b1804b1-40c256ffdbcso73538275e9.2 for ; Wed, 13 Dec 2023 09:13:23 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1702487602; x=1703092402; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=31dDSPmTEwAk2xBEYscYsgGP3NvqtS1pbeFP7C1NdB4=; b=vRf3GCAmd+2vsajOLfAobRT+HWtWdv+hzJNN85w4SlVSwkTshej+VkKMBeWv+acXml C9XpuvlgS++/L5bfwGASViy5FYv1NfwwFsWi7g6zGYnHFnascWiKlpZLFvrvfvzyjjSl QBidhyT7ChrPhfMvmAilBGRxXxoZGnIZQ1Y2QfMUkIVF8YcQUiun4vNkyc5y8OAYkymu XyIQCxgiSIk9Z3zADaN5XdBCErAQTpG8XgjlqB5SCpSMTJAZNIanKVUnn3LhJxad3YGB tQOsDVeltktB1Ya6sYdrm0pN+maEkahjfBCQ0JkxCXTp0vV2WYphhtKsQdxNblZcJnsx NgDg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1702487602; x=1703092402; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=31dDSPmTEwAk2xBEYscYsgGP3NvqtS1pbeFP7C1NdB4=; b=eKtPuy6PEI/rfJaElIL+UEWUShJWz2DhenicKXt6ssJgOnfHl7H7uyoX1qVQBoQxw6 4ydv+sziHbF5BshVxIcIJf7YDSS64wmQ17CqhtoeCTzb3SXCFYRyZ08nfYFGk6CBCOho RsZ5PDCOq52BQ3jC10VeJwzLUlh9zGjsMwXVxvpPd/VQPdc7loxCtaxRIJ0lP7Ore/q+ ltUu/yUsG/WIwV8F4m06yrGn5d5FZG/csmAEhcLA2n1a3Ct45g2JKwl4j3QV9T09mOKp olts1j3uqWpqBd1fZokSLWAu657W36EKb5IwyppwcnRYXm+y0uTtjUNUkHft+4vX57HB WtKA== X-Gm-Message-State: AOJu0YxHHCpYFD4Wm2PaHKsT1LTb8CftiTWWTtVxj1LeSAaPro2U7gRl mM4e/iQbALFCziuXrAdYvwWaZg== X-Google-Smtp-Source: AGHT+IFNxRWuoyoMH99OVMds74dBq0nzs3ZGX6y7FzWzIYWb39Co8GjVY1K8MQjTbIB5l3gmiCGrGQ== X-Received: by 2002:a05:600c:21c7:b0:40b:5e59:c56d with SMTP id x7-20020a05600c21c700b0040b5e59c56dmr3995877wmj.151.1702487601882; Wed, 13 Dec 2023 09:13:21 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id fs27-20020a05600c3f9b00b0040b36050f1bsm20711039wmb.44.2023.12.13.09.13.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 13 Dec 2023 09:13:21 -0800 (PST) From: Neil Armstrong Date: Wed, 13 Dec 2023 18:13:15 +0100 Subject: [PATCH v13 1/4] dt-bindings: input: document Goodix Berlin Touchscreen IC Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231213-topic-goodix-berlin-upstream-initial-v13-1-5d7a26a5eaa2@linaro.org> References: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> In-Reply-To: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> To: Dmitry Torokhov , linux-input@vger.kernel.org Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bastien Nocera , Hans de Goede , Henrik Rydberg , Jeff LaBundy , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong , Rob Herring X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=3093; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=sfk9uxvNPIwk9f8d5iBn9m2N4nTZgMQFpRmAil1gnVU=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBleeYtdo3/RXb6z9No87q/nEif3kzQeQmpKl3o0czv dBOjeaaJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZXnmLQAKCRB33NvayMhJ0SNFD/ 4mDZ9YQJBUetNhtMkQ1OwNW2iiRHIva7gDQ0eXvOZSnejUXC0krLIS2/LeWhzWbgjY8RS4jZ8fxlVY ufvtpjrC0RYSBsVLNYROB5TTFMakp0b5PplncZuFOL6xD9kFT5nhHJVxglIPWi9afFHobmgAzoq/1A 5Z3ypeh15eXYfAVzxqlZR9zaIDnWQFqa0Tzox9+GGYYt53E3uPGmNznsXREthx+25Fxf0eHnd243JR cvAEN/pyI7OCvFm5JVLQY8vGV4ZU5V0jR7dC72WMwF8XU4mu0B3Z3CpMN8tNts5h9DXkhZTk31mBzb 7bLNaY2fKrFS4rEXSyd7x6fliIRRPpzfRMMfwBewO7Lx1VdHHxQdpf0T6HXF9rB662/kigJb/f3fkH Qj/1I43y4JiNGxiSq0DG7q7dGeQdbtX4xcD1hWgrf6s5gonieDKyN6juaYdd4RLNCFEbx4NDigu1Hx RngW8T/ecjZCJcVknWc9gR26O5tNWvm55qolQDHLp/+kZW6XCnEDsGZIa4/i4gjyURcLoQyvCC6rJ9 zCmuGWNc/9nUc7n0Q5wXpvsJYEPk418VjICddEJFaXub1uTHUkAUAB96xzM4UHMUi/3e5rq8BVpkqU poiSSwbPPwLJP6BiXxyNKNjNIqbJS5ngAmUz1CBAtsiHaYTQsdx9f6xiaBtA== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Document the Goodix GT9916 wich is part of the "Berlin" serie of Touchscreen controllers IC from Goodix. Reviewed-by: Rob Herring Signed-off-by: Neil Armstrong --- .../bindings/input/touchscreen/goodix,gt9916.yaml | 95 ++++++++++++++++++++++ 1 file changed, 95 insertions(+) diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml new file mode 100644 index 000000000000..d90f045ac06c --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix,gt9916.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/goodix,gt9916.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Goodix Berlin series touchscreen controller + +description: The Goodix Berlin series of touchscreen controllers + be connected to either I2C or SPI buses. + +maintainers: + - Neil Armstrong + +allOf: + - $ref: touchscreen.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - goodix,gt9916 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vddio-supply: + description: power supply regulator on VDDIO pin + + spi-max-frequency: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - avdd-supply + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@5d { + compatible = "goodix,gt9916"; + reg = <0x5d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + - | + #include + #include + spi { + #address-cells = <1>; + #size-cells = <0>; + num-cs = <1>; + cs-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + touchscreen@0 { + compatible = "goodix,gt9916"; + reg = <0>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>; + avdd-supply = <&ts_avdd>; + spi-max-frequency = <1000000>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <768>; + }; + }; + +... From patchwork Wed Dec 13 17:13:16 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 753705 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="o2ox9kZ+" Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com [IPv6:2a00:1450:4864:20::32c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AE30C10B for ; Wed, 13 Dec 2023 09:13:24 -0800 (PST) Received: by mail-wm1-x32c.google.com with SMTP id 5b1f17b1804b1-40c317723a8so62220565e9.3 for ; Wed, 13 Dec 2023 09:13:24 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1702487603; x=1703092403; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=pEdItdQE1OpML0wr7I6ORrYsOsbZ4499hDfYpPqIWsU=; b=o2ox9kZ+vfef7CKN1ZbxE4Z1gHZ03ta3ftQHz2hl5kjfw/ALjbLDtu0JyOQm7HeWcQ j1adSu7S0muziXUgEr2pSNZhntyUovs/CAvOtbzFNbnUOH+ON3Qo17Mc0+BY/h6HV/zZ 3jy4BEwMlwpnnzWSc0KdYdKmMIhGLHVNUlQRfBiFIJoYWPdw4FyOWK5SQxg+EJjbfs56 PUc9xAxEXxCCO3fT4Z+uF/K2bzYQ+GaY7s4WvWbL3THVaRpjNpDcD2LTFbrDR+U18b1e CbTbYYgHzBpscUOVJYolFBEdNhDp2cBHHShGRfvbu4CWx730DXU/xVO84DfFm2EAaOI6 u2RQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1702487603; x=1703092403; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=pEdItdQE1OpML0wr7I6ORrYsOsbZ4499hDfYpPqIWsU=; b=aJIta2ooSsfGOmRQ0EwlEW64DFlxICjfxJWj+wdxStaliHJbe+siFTDRmQ3FIo73/s C7rljNVtR3H6ca0XSNPzAIUETzi7Xeg1mCIFhITqdfG17kgMcQUZGSLiOxXFxD65WJRe GWQxRawa6VxP9JiNUboYFea6n2vp5TdRr0+H577lcPJkhyuD3X6S+s3XCMehCaPWjtmE W3RdXFymLBGNnJ8BlfVYfrMTn5bop2HYWZuS43RnC9QNzpzJ5dl6iOHG+s91VF1y8QOz vS6HQJmlM2V8Zliiuec84tqrQongukG/OFZ1XWApQIsHeedwuSsSARPdqZDAUSBENGdX ZP6w== X-Gm-Message-State: AOJu0YzzwAZtw5/EQ/s33UuhcwCdimYvaNQdPshWqGGzM1egNkfrsIZt EMXXACutW4zbL4imXgeSbzODIw== X-Google-Smtp-Source: AGHT+IGjU+O8qqHpwFDthzySg76Q/KwYLfqqlK80fwSz9eGZWeQG05LYJDi7r6JyPsAnEU6JOlh01g== X-Received: by 2002:a05:600c:4fd5:b0:40c:34e1:72ef with SMTP id o21-20020a05600c4fd500b0040c34e172efmr4290178wmq.84.1702487602947; Wed, 13 Dec 2023 09:13:22 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id fs27-20020a05600c3f9b00b0040b36050f1bsm20711039wmb.44.2023.12.13.09.13.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 13 Dec 2023 09:13:22 -0800 (PST) From: Neil Armstrong Date: Wed, 13 Dec 2023 18:13:16 +0100 Subject: [PATCH v13 2/4] Input: add core support for Goodix Berlin Touchscreen IC Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231213-topic-goodix-berlin-upstream-initial-v13-2-5d7a26a5eaa2@linaro.org> References: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> In-Reply-To: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> To: Dmitry Torokhov , linux-input@vger.kernel.org Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bastien Nocera , Hans de Goede , Henrik Rydberg , Jeff LaBundy , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=24684; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=D7ibsnQcYQ3ryhUp6zqM4h9Br2jexQZJJwodpjV4deE=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBleeYuRiPW2TtvCg89PxJX9pPablkeb84WDAZsl6fH XMDsWW6JAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZXnmLgAKCRB33NvayMhJ0UXdEA CgLXN/09BGGbpNUvhcolNkVBPI+yBdWmARpTy13HVOti8FMA2PKp/m8Hjmp0eYTBdzQcNgLti0O9oP TjrYWd9l0c66jeJUxXMvKi2k44RbJmD9rdH+8GgsY6K/BSR8lYq6hNkQr+OIe37SnHmjdhoFsEfAxA AyARrhPcLbW9FO++YaHzOzbsiogb3cz3r3V0r+F+KRg0ZGJaIw1XMGlBOTvm6mqTA8S+nlwTNIfQLq gBP1o/x661ILaTlMxlbHRLCjwm86WX5ddU33Wd1CsWujOGUIcz05tCMhrWIYOwQHj91lybtf00g6Pk TI9ldAKMTiOo58ww/lk29XU93Sd6YbF8glGi6XBwatn9lBzEiYDlQT9zolMKM02IMDcO5tt7IeX2/3 jj51ZauBcwQfaCbqtZZa14Mc1b9ulHprNMv9oj9KWd+aEwFErJbt4hGuLvjEBYXpQ7C/otMzx5UIFx ZqEjPAD5PUD+3azrjXNESYsVS5TBh21feyED8mQwhF/b++vrK2k4zLhERGhFn91nPgPphp4+GpTKXJ AuoDw+SyRSuRLLhMFX7tdylwrwuwpCsOvRvEIB4QzrIg7xEWHDDb2vN1HWWbCS4hisBg57+Nzyq2WB IyYCKYbaBup+vUxEOWY/E+4BSPME5KQqF+1rc4Ek4FGjMuhzk1VExHBPTwDw== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add initial support for the new Goodix "Berlin" touchscreen ICs. These touchscreen ICs support SPI, I2C and I3C interface, up to 10 finger touch, stylus and gestures events. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. Support for advanced features like: - Firmware & config update - Stylus events - Gestures events - Previous revisions support (BerlinA or BerlinB) is not included in current version. The current support will work with currently flashed firmware and config, and bail out if firmware or config aren't flashed yet. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy Signed-off-by: Neil Armstrong --- drivers/input/touchscreen/Kconfig | 3 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/goodix_berlin.h | 24 + drivers/input/touchscreen/goodix_berlin_core.c | 766 +++++++++++++++++++++++++ 4 files changed, 794 insertions(+) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index e3e2324547b9..950da599ae1a 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -416,6 +416,9 @@ config TOUCHSCREEN_GOODIX To compile this driver as a module, choose M here: the module will be called goodix. +config TOUCHSCREEN_GOODIX_BERLIN_CORE + tristate + config TOUCHSCREEN_HIDEEP tristate "HiDeep Touch IC" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 62bd24f3ac8e..2e2f3e70cd2c 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -47,6 +47,7 @@ obj-$(CONFIG_TOUCHSCREEN_EGALAX_SERIAL) += egalax_ts_serial.o obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o diff --git a/drivers/input/touchscreen/goodix_berlin.h b/drivers/input/touchscreen/goodix_berlin.h new file mode 100644 index 000000000000..1fd77eb69c9a --- /dev/null +++ b/drivers/input/touchscreen/goodix_berlin.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Goodix Touchscreen Driver + * Copyright (C) 2020 - 2021 Goodix, Inc. + * Copyright (C) 2023 Linaro Ltd. + * + * Based on goodix_berlin_berlin driver. + */ + +#ifndef __GOODIX_BERLIN_H_ +#define __GOODIX_BERLIN_H_ + +#include + +struct device; +struct input_id; +struct regmap; + +int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id, + struct regmap *regmap); + +extern const struct dev_pm_ops goodix_berlin_pm_ops; + +#endif diff --git a/drivers/input/touchscreen/goodix_berlin_core.c b/drivers/input/touchscreen/goodix_berlin_core.c new file mode 100644 index 000000000000..6aca57e6b5d6 --- /dev/null +++ b/drivers/input/touchscreen/goodix_berlin_core.c @@ -0,0 +1,766 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Goodix "Berlin" Touchscreen IC driver + * Copyright (C) 2020 - 2021 Goodix, Inc. + * Copyright (C) 2023 Linaro Ltd. + * + * Based on goodix_ts_berlin driver. + * + * This driver is distinct from goodix.c since hardware interface + * is different enough to require a new driver. + * None of the register address or data structure are close enough + * to the previous generations. + * + * Currently the driver only handles Multitouch events with already + * programmed firmware and "config" for "Revision D" Berlin IC. + * + * Support is missing for: + * - ESD Management + * - Firmware update/flashing + * - "Config" update/flashing + * - Stylus Events + * - Gesture Events + * - Support for older revisions (A & B) + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "goodix_berlin.h" + +#define GOODIX_BERLIN_MAX_TOUCH 10 + +#define GOODIX_BERLIN_NORMAL_RESET_DELAY_MS 100 + +#define GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN 8 +#define GOODIX_BERLIN_STATUS_OFFSET 0 +#define GOODIX_BERLIN_REQUEST_TYPE_OFFSET 2 + +#define GOODIX_BERLIN_BYTES_PER_POINT 8 +#define GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE 2 +#define GOODIX_BERLIN_COOR_DATA_CHECKSUM_MASK GENMASK(15, 0) + +/* Read n finger events */ +#define GOODIX_BERLIN_IRQ_READ_LEN(n) (GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN + \ + (GOODIX_BERLIN_BYTES_PER_POINT * (n)) + \ + GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE) + +#define GOODIX_BERLIN_TOUCH_EVENT BIT(7) +#define GOODIX_BERLIN_REQUEST_EVENT BIT(6) +#define GOODIX_BERLIN_TOUCH_COUNT_MASK GENMASK(3, 0) + +#define GOODIX_BERLIN_REQUEST_CODE_RESET 3 + +#define GOODIX_BERLIN_POINT_TYPE_MASK GENMASK(3, 0) +#define GOODIX_BERLIN_POINT_TYPE_STYLUS_HOVER 1 +#define GOODIX_BERLIN_POINT_TYPE_STYLUS 3 + +#define GOODIX_BERLIN_TOUCH_ID_MASK GENMASK(7, 4) + +#define GOODIX_BERLIN_DEV_CONFIRM_VAL 0xAA +#define GOODIX_BERLIN_BOOTOPTION_ADDR 0x10000 +#define GOODIX_BERLIN_FW_VERSION_INFO_ADDR 0x10014 + +#define GOODIX_BERLIN_IC_INFO_MAX_LEN SZ_1K +#define GOODIX_BERLIN_IC_INFO_ADDR 0x10070 + +struct goodix_berlin_fw_version { + u8 rom_pid[6]; + u8 rom_vid[3]; + u8 rom_vid_reserved; + u8 patch_pid[8]; + u8 patch_vid[4]; + u8 patch_vid_reserved; + u8 sensor_id; + u8 reserved[2]; + __le16 checksum; +} __packed; + +struct goodix_berlin_ic_info_version { + u8 info_customer_id; + u8 info_version_id; + u8 ic_die_id; + u8 ic_version_id; + __le32 config_id; + u8 config_version; + u8 frame_data_customer_id; + u8 frame_data_version_id; + u8 touch_data_customer_id; + u8 touch_data_version_id; + u8 reserved[3]; +} __packed; + +struct goodix_berlin_ic_info_feature { + __le16 freqhop_feature; + __le16 calibration_feature; + __le16 gesture_feature; + __le16 side_touch_feature; + __le16 stylus_feature; +} __packed; + +struct goodix_berlin_ic_info_misc { + __le32 cmd_addr; + __le16 cmd_max_len; + __le32 cmd_reply_addr; + __le16 cmd_reply_len; + __le32 fw_state_addr; + __le16 fw_state_len; + __le32 fw_buffer_addr; + __le16 fw_buffer_max_len; + __le32 frame_data_addr; + __le16 frame_data_head_len; + __le16 fw_attr_len; + __le16 fw_log_len; + u8 pack_max_num; + u8 pack_compress_version; + __le16 stylus_struct_len; + __le16 mutual_struct_len; + __le16 self_struct_len; + __le16 noise_struct_len; + __le32 touch_data_addr; + __le16 touch_data_head_len; + __le16 point_struct_len; + __le16 reserved1; + __le16 reserved2; + __le32 mutual_rawdata_addr; + __le32 mutual_diffdata_addr; + __le32 mutual_refdata_addr; + __le32 self_rawdata_addr; + __le32 self_diffdata_addr; + __le32 self_refdata_addr; + __le32 iq_rawdata_addr; + __le32 iq_refdata_addr; + __le32 im_rawdata_addr; + __le16 im_readata_len; + __le32 noise_rawdata_addr; + __le16 noise_rawdata_len; + __le32 stylus_rawdata_addr; + __le16 stylus_rawdata_len; + __le32 noise_data_addr; + __le32 esd_addr; +} __packed; + +struct goodix_berlin_touch_data { + u8 id; + u8 unused; + __le16 x; + __le16 y; + __le16 w; +} __packed; + +struct goodix_berlin_core { + struct device *dev; + struct regmap *regmap; + struct regulator *avdd; + struct regulator *iovdd; + struct gpio_desc *reset_gpio; + struct touchscreen_properties props; + struct goodix_berlin_fw_version fw_version; + struct input_dev *input_dev; + int irq; + + /* Runtime parameters extracted from IC_INFO buffer */ + u32 touch_data_addr; +}; + +static bool goodix_berlin_checksum_valid(const u8 *data, int size) +{ + u32 cal_checksum = 0; + u16 r_checksum; + u32 i; + + if (size < GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE) + return false; + + for (i = 0; i < size - GOODIX_BERLIN_COOR_DATA_CHECKSUM_SIZE; i++) + cal_checksum += data[i]; + + cal_checksum = FIELD_GET(GOODIX_BERLIN_COOR_DATA_CHECKSUM_MASK, + cal_checksum); + r_checksum = get_unaligned_le16(&data[i]); + + return cal_checksum == r_checksum; +} + +static bool goodix_berlin_is_dummy_data(struct goodix_berlin_core *cd, + const u8 *data, int size) +{ + int i; + + /* + * If the device is missing or doesn't respond the buffer + * could be filled with bus default line state, 0x00 or 0xff, + * so declare success the first time we encounter neither. + */ + for (i = 0; i < size; i++) + if (data[i] > 0 && data[i] < 0xff) + return false; + + return true; +} + +static int goodix_berlin_dev_confirm(struct goodix_berlin_core *cd) +{ + u8 tx_buf[8], rx_buf[8]; + int retry = 3; + int error; + + memset(tx_buf, GOODIX_BERLIN_DEV_CONFIRM_VAL, sizeof(tx_buf)); + while (retry--) { + error = regmap_raw_write(cd->regmap, + GOODIX_BERLIN_BOOTOPTION_ADDR, + tx_buf, sizeof(tx_buf)); + if (error) + return error; + + error = regmap_raw_read(cd->regmap, + GOODIX_BERLIN_BOOTOPTION_ADDR, + rx_buf, sizeof(rx_buf)); + if (error) + return error; + + if (!memcmp(tx_buf, rx_buf, sizeof(tx_buf))) + return 0; + + usleep_range(5000, 5100); + } + + dev_err(cd->dev, "device confirm failed, rx_buf: %*ph\n", + (int)sizeof(rx_buf), rx_buf); + + return -EINVAL; +} + +static int goodix_berlin_power_on(struct goodix_berlin_core *cd) +{ + int error; + + error = regulator_enable(cd->iovdd); + if (error) { + dev_err(cd->dev, "Failed to enable iovdd: %d\n", error); + return error; + } + + /* Vendor waits 3ms for IOVDD to settle */ + usleep_range(3000, 3100); + + error = regulator_enable(cd->avdd); + if (error) { + dev_err(cd->dev, "Failed to enable avdd: %d\n", error); + goto err_iovdd_disable; + } + + /* Vendor waits 15ms for IOVDD to settle */ + usleep_range(15000, 15100); + + gpiod_set_value_cansleep(cd->reset_gpio, 0); + + /* Vendor waits 4ms for Firmware to initialize */ + usleep_range(4000, 4100); + + error = goodix_berlin_dev_confirm(cd); + if (error) + goto err_dev_reset; + + /* Vendor waits 100ms for Firmware to fully boot */ + msleep(GOODIX_BERLIN_NORMAL_RESET_DELAY_MS); + + return 0; + +err_dev_reset: + gpiod_set_value_cansleep(cd->reset_gpio, 1); + regulator_disable(cd->avdd); +err_iovdd_disable: + regulator_disable(cd->iovdd); + return error; +} + +static void goodix_berlin_power_off(struct goodix_berlin_core *cd) +{ + gpiod_set_value_cansleep(cd->reset_gpio, 1); + regulator_disable(cd->avdd); + regulator_disable(cd->iovdd); +} + +static int goodix_berlin_read_version(struct goodix_berlin_core *cd) +{ + u8 buf[sizeof(struct goodix_berlin_fw_version)]; + int error; + + error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_FW_VERSION_INFO_ADDR, + buf, sizeof(buf)); + if (error) { + dev_err(cd->dev, "error reading fw version, %d\n", error); + return error; + } + + if (!goodix_berlin_checksum_valid(buf, sizeof(buf))) { + dev_err(cd->dev, "invalid fw version: checksum error\n"); + return -EINVAL; + } + + memcpy(&cd->fw_version, buf, sizeof(cd->fw_version)); + + return 0; +} + +/* Only extract necessary data for runtime */ +static int goodix_berlin_convert_ic_info(struct goodix_berlin_core *cd, + const u8 *data, u16 length) +{ + struct goodix_berlin_ic_info_misc misc; + unsigned int offset = 0; + u8 param_num; + + offset += sizeof(__le16); /* length */ + offset += sizeof(struct goodix_berlin_ic_info_version); + offset += sizeof(struct goodix_berlin_ic_info_feature); + + /* IC_INFO Parameters, variable width structure */ + offset += 4 * sizeof(u8); /* drv_num, sen_num, button_num, force_num */ + + if (offset >= length) + goto invalid_offset; + + param_num = data[offset++]; /* active_scan_rate_num */ + + offset += param_num * sizeof(__le16); + + if (offset >= length) + goto invalid_offset; + + param_num = data[offset++]; /* mutual_freq_num*/ + + offset += param_num * sizeof(__le16); + + if (offset >= length) + goto invalid_offset; + + param_num = data[offset++]; /* self_tx_freq_num */ + + offset += param_num * sizeof(__le16); + + if (offset >= length) + goto invalid_offset; + + param_num = data[offset++]; /* self_rx_freq_num */ + + offset += param_num * sizeof(__le16); + + if (offset >= length) + goto invalid_offset; + + param_num = data[offset++]; /* stylus_freq_num */ + + offset += param_num * sizeof(__le16); + + if (offset + sizeof(misc) > length) + goto invalid_offset; + + /* goodix_berlin_ic_info_misc */ + memcpy(&misc, &data[offset], sizeof(misc)); + + cd->touch_data_addr = le32_to_cpu(misc.touch_data_addr); + + return 0; + +invalid_offset: + dev_err(cd->dev, "ic_info length is invalid (offset %d length %d)\n", + offset, length); + return -EINVAL; +} + +static int goodix_berlin_get_ic_info(struct goodix_berlin_core *cd) +{ + u8 *afe_data __free(kfree) = NULL; + __le16 length_raw; + u16 length; + int error; + + afe_data = kzalloc(GOODIX_BERLIN_IC_INFO_MAX_LEN, GFP_KERNEL); + if (!afe_data) + return -ENOMEM; + + error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR, + &length_raw, sizeof(length_raw)); + if (error) { + dev_err(cd->dev, "failed get ic info length, %d\n", error); + return error; + } + + length = le16_to_cpu(length_raw); + if (length >= GOODIX_BERLIN_IC_INFO_MAX_LEN) { + dev_err(cd->dev, "invalid ic info length %d\n", length); + return -EINVAL; + } + + error = regmap_raw_read(cd->regmap, GOODIX_BERLIN_IC_INFO_ADDR, + afe_data, length); + if (error) { + dev_err(cd->dev, "failed get ic info data, %d\n", error); + return error; + } + + /* check whether the data is valid (ex. bus default values) */ + if (goodix_berlin_is_dummy_data(cd, afe_data, length)) { + dev_err(cd->dev, "fw info data invalid\n"); + return -EINVAL; + } + + if (!goodix_berlin_checksum_valid(afe_data, length)) { + dev_err(cd->dev, "fw info checksum error\n"); + return -EINVAL; + } + + error = goodix_berlin_convert_ic_info(cd, afe_data, length); + if (error) + return error; + + /* check some key info */ + if (!cd->touch_data_addr) { + dev_err(cd->dev, "touch_data_addr is null\n"); + return -EINVAL; + } + + return 0; +} + +static void goodix_berlin_parse_finger(struct goodix_berlin_core *cd, + const void *buf, int touch_num) +{ + const struct goodix_berlin_touch_data *touch_data = buf; + int i; + + /* Report finger touches */ + for (i = 0; i < touch_num; i++) { + unsigned int id = FIELD_GET(GOODIX_BERLIN_TOUCH_ID_MASK, + touch_data[i].id); + + if (id >= GOODIX_BERLIN_MAX_TOUCH) { + dev_warn_ratelimited(cd->dev, + "invalid finger id %d\n", id); + continue; + } + + input_mt_slot(cd->input_dev, id); + input_mt_report_slot_state(cd->input_dev, MT_TOOL_FINGER, true); + + touchscreen_report_pos(cd->input_dev, &cd->props, + __le16_to_cpu(touch_data[i].x), + __le16_to_cpu(touch_data[i].y), + true); + input_report_abs(cd->input_dev, ABS_MT_TOUCH_MAJOR, + __le16_to_cpu(touch_data[i].w)); + } + + input_mt_sync_frame(cd->input_dev); + input_sync(cd->input_dev); +} + +static void goodix_berlin_touch_handler(struct goodix_berlin_core *cd, + const void *pre_buf, u32 pre_buf_len) +{ + u8 buffer[GOODIX_BERLIN_IRQ_READ_LEN(GOODIX_BERLIN_MAX_TOUCH)]; + u8 point_type, touch_num; + int error; + + /* copy pre-data to buffer */ + memcpy(buffer, pre_buf, pre_buf_len); + + touch_num = FIELD_GET(GOODIX_BERLIN_TOUCH_COUNT_MASK, + buffer[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]); + + if (touch_num > GOODIX_BERLIN_MAX_TOUCH) { + dev_warn(cd->dev, "invalid touch num %d\n", touch_num); + return; + } + + if (touch_num) { + /* read more data if more than 2 touch events */ + if (unlikely(touch_num > 2)) { + error = regmap_raw_read(cd->regmap, + cd->touch_data_addr + pre_buf_len, + &buffer[pre_buf_len], + (touch_num - 2) * GOODIX_BERLIN_BYTES_PER_POINT); + if (error) { + dev_err_ratelimited(cd->dev, "failed to get touch data, %d\n", + error); + return; + } + } + + point_type = FIELD_GET(GOODIX_BERLIN_POINT_TYPE_MASK, + buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]); + + if (point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS || + point_type == GOODIX_BERLIN_POINT_TYPE_STYLUS_HOVER) { + dev_warn_once(cd->dev, "Stylus event type not handled\n"); + return; + } + + if (!goodix_berlin_checksum_valid(&buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN], + touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2)) { + dev_err(cd->dev, "touch data checksum error: %*ph\n", + touch_num * GOODIX_BERLIN_BYTES_PER_POINT + 2, + &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN]); + return; + } + } + + goodix_berlin_parse_finger(cd, &buffer[GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN], + touch_num); +} + +static int goodix_berlin_request_handle_reset(struct goodix_berlin_core *cd) +{ + gpiod_set_value_cansleep(cd->reset_gpio, 1); + usleep_range(2000, 2100); + gpiod_set_value_cansleep(cd->reset_gpio, 0); + + msleep(GOODIX_BERLIN_NORMAL_RESET_DELAY_MS); + + return 0; +} + +static irqreturn_t goodix_berlin_irq(int irq, void *data) +{ + struct goodix_berlin_core *cd = data; + u8 buf[GOODIX_BERLIN_IRQ_READ_LEN(2)]; + u8 event_status; + int error; + + /* + * First, read buffer with space for 2 touch events: + * - GOODIX_BERLIN_IRQ_EVENT_HEAD = 8 bytes + * - GOODIX_BERLIN_BYTES_PER_POINT * 2 + + * GOODIX_BERLIN_COOR_DATA_CHECKSUM = 18 bytes + * For a total of 26 bytes. + * + * If only a single finger is reported, we will read 8 bytes more than needed: + * - bytes 0-7: GOODIX_BERLIN_IRQ_EVENT_HEAD + * - bytes 8-15: Finger 0 Data + * - bytes 16-17: GOODIX_BERLIN_COOR_DATA_CHECKSUM + * - bytes 18-25: Unused 8 bytes + * + * If 2 fingers are reported, we would have read the exact needed amount of + * data and checkout would be at the end of the buffer: + * - bytes 0-7: GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN + * - bytes 8-15: Finger 0 Bytes 0-7 + * - bytes 16-23: Finger 1 Bytes 0-7 + * - bytes 24-25: GOODIX_BERLIN_COOR_DATA_CHECKSUM + * + * If more than 2 fingers were reported, the "Checksum" bytes would in fact + * contain part of the next finger data, and then we would complete the buffer + * with the missing bytes, but by keeping the GOODIX_BERLIN_IRQ_READ_LEN(2) + * size as base, it will still contain space for the final 2 bytes checksum: + * - bytes 0-7: GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN] + * - bytes 8-15: Finger 0 Bytes 0-7 + * - bytes 16-23: Finger 1 Bytes 0-7 + * - bytes 24-25: Finger 2 Bytes 0-1 + * for example if 3 fingers are reported, (3 - 2) * 8 = 8 bytes would be read: + * - bytes 26-31: Finger 2 Bytes 2-7 + * - bytes 32-33: GOODIX_BERLIN_COOR_DATA_CHECKSUM + */ + error = regmap_raw_read(cd->regmap, cd->touch_data_addr, buf, + GOODIX_BERLIN_IRQ_READ_LEN(2)); + if (error) { + dev_warn_ratelimited(cd->dev, + "failed get event head data: %d\n", error); + return IRQ_HANDLED; + } + + if (buf[GOODIX_BERLIN_STATUS_OFFSET] == 0) + return IRQ_HANDLED; + + if (!goodix_berlin_checksum_valid(buf, GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN)) { + dev_warn_ratelimited(cd->dev, + "touch head checksum error: %*ph\n", + GOODIX_BERLIN_IRQ_EVENT_HEAD_LEN, buf); + return IRQ_HANDLED; + } + + event_status = buf[GOODIX_BERLIN_STATUS_OFFSET]; + + if (event_status & GOODIX_BERLIN_TOUCH_EVENT) + goodix_berlin_touch_handler(cd, buf, + GOODIX_BERLIN_IRQ_READ_LEN(2)); + + if (event_status & GOODIX_BERLIN_REQUEST_EVENT) { + switch (buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]) { + case GOODIX_BERLIN_REQUEST_CODE_RESET: + if (cd->reset_gpio) + goodix_berlin_request_handle_reset(cd); + break; + + default: + dev_warn(cd->dev, "unsupported request code 0x%x\n", + buf[GOODIX_BERLIN_REQUEST_TYPE_OFFSET]); + } + } + + /* Clear up status field */ + regmap_write(cd->regmap, cd->touch_data_addr, 0); + + return IRQ_HANDLED; +} + +static int goodix_berlin_input_dev_config(struct goodix_berlin_core *cd, + const struct input_id *id) +{ + struct input_dev *input_dev; + int error; + + input_dev = devm_input_allocate_device(cd->dev); + if (!input_dev) + return -ENOMEM; + + cd->input_dev = input_dev; + input_set_drvdata(input_dev, cd); + + input_dev->name = "Goodix Berlin Capacitive TouchScreen"; + input_dev->phys = "input/ts"; + + input_dev->id = *id; + + input_set_abs_params(cd->input_dev, ABS_MT_POSITION_X, + 0, SZ_64K - 1, 0, 0); + input_set_abs_params(cd->input_dev, ABS_MT_POSITION_Y, + 0, SZ_64K - 1, 0, 0); + input_set_abs_params(cd->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); + + touchscreen_parse_properties(cd->input_dev, true, &cd->props); + + error = input_mt_init_slots(cd->input_dev, GOODIX_BERLIN_MAX_TOUCH, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) + return error; + + error = input_register_device(cd->input_dev); + if (error) + return error; + + return 0; +} + +static int goodix_berlin_suspend(struct device *dev) +{ + struct goodix_berlin_core *cd = dev_get_drvdata(dev); + + disable_irq(cd->irq); + goodix_berlin_power_off(cd); + + return 0; +} + +static int goodix_berlin_resume(struct device *dev) +{ + struct goodix_berlin_core *cd = dev_get_drvdata(dev); + int error; + + error = goodix_berlin_power_on(cd); + if (error) + return error; + + enable_irq(cd->irq); + + return 0; +} + +EXPORT_GPL_SIMPLE_DEV_PM_OPS(goodix_berlin_pm_ops, + goodix_berlin_suspend, goodix_berlin_resume); + +static void goodix_berlin_power_off_act(void *data) +{ + struct goodix_berlin_core *cd = data; + + goodix_berlin_power_off(cd); +} + +int goodix_berlin_probe(struct device *dev, int irq, const struct input_id *id, + struct regmap *regmap) +{ + struct goodix_berlin_core *cd; + int error; + + if (irq <= 0) { + dev_err(dev, "Missing interrupt number\n"); + return -EINVAL; + } + + cd = devm_kzalloc(dev, sizeof(*cd), GFP_KERNEL); + if (!cd) + return -ENOMEM; + + cd->dev = dev; + cd->regmap = regmap; + cd->irq = irq; + + cd->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(cd->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(cd->reset_gpio), + "Failed to request reset gpio\n"); + + cd->avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(cd->avdd)) + return dev_err_probe(dev, PTR_ERR(cd->avdd), + "Failed to request avdd regulator\n"); + + cd->iovdd = devm_regulator_get(dev, "iovdd"); + if (IS_ERR(cd->iovdd)) + return dev_err_probe(dev, PTR_ERR(cd->iovdd), + "Failed to request iovdd regulator\n"); + + error = goodix_berlin_power_on(cd); + if (error) { + dev_err(dev, "failed power on"); + return error; + } + + error = devm_add_action_or_reset(dev, goodix_berlin_power_off_act, cd); + if (error) + return error; + + error = goodix_berlin_read_version(cd); + if (error) { + dev_err(dev, "failed to get version info"); + return error; + } + + error = goodix_berlin_get_ic_info(cd); + if (error) { + dev_err(dev, "invalid ic info, abort"); + return error; + } + + error = goodix_berlin_input_dev_config(cd, id); + if (error) { + dev_err(dev, "failed set input device"); + return error; + } + + error = devm_request_threaded_irq(dev, cd->irq, NULL, goodix_berlin_irq, + IRQF_ONESHOT, "goodix-berlin", cd); + if (error) { + dev_err(dev, "request threaded irq failed: %d\n", error); + return error; + } + + dev_set_drvdata(dev, cd); + + dev_dbg(dev, "Goodix Berlin %s Touchscreen Controller", + cd->fw_version.patch_pid); + + return 0; +} +EXPORT_SYMBOL_GPL(goodix_berlin_probe); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Goodix Berlin Core Touchscreen driver"); +MODULE_AUTHOR("Neil Armstrong "); From patchwork Wed Dec 13 17:13:17 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 754091 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="pSr7xydS" Received: from mail-wm1-x32f.google.com (mail-wm1-x32f.google.com [IPv6:2a00:1450:4864:20::32f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7F0E610E for ; Wed, 13 Dec 2023 09:13:25 -0800 (PST) Received: by mail-wm1-x32f.google.com with SMTP id 5b1f17b1804b1-40c2308faedso73641735e9.1 for ; Wed, 13 Dec 2023 09:13:25 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1702487604; x=1703092404; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=tid5p5CbwnFew1OoFmZZ3rTS9lA993ke+t72lpp1p7Y=; b=pSr7xydSqfVB+HNRDEbWU5q+MGqUiekIMXejqpEGwrynrMcdxX+k8mdSJpE5EicUId eGHukWuypFmzeyWRz4VIvRynnGXQulRDRekw7HEv1SRUpDnG3ZW+4JQT/tIAPok9BSdN QHlSOHN7mZPlr1ykbV3EQaVjbgA9u8DdTMEvwTLCpJSPye+HhpuEfMI0wl327qOxejjl f8UuALJ/H+PEEZ1XnYZDHiFDnGCvTlyuPCV+/tBknSQFECIqeVIOICOt7wDP1quQSTN5 h1iNS7wDpJ+eHglJA9qpoNK1ZA933LsUFQpCYvqnXcFDhrTFoBKP8nvSqUNBZ27XUx6J Ztig== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1702487604; x=1703092404; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=tid5p5CbwnFew1OoFmZZ3rTS9lA993ke+t72lpp1p7Y=; b=Yh4pvMlSHW6xuk3dtEFlXWQ5Wi4tb2HBGxzv/T1gTAYWGTqCl9a0T3B9x3k5PE8Mh/ o20/E52eUeLV73lfycsd7+WNZplwnNA9HQgVH+zJHebwaPiZJzNlhs2+G00mfEHKYdOK afpq4OZD4TWAh/pPbxTjEyfWS21JwnVNLKbwbToH4sanHuEEmgGrz0VjbeZqruZCI06B TFI3xqkWOsvkwJD2QKI9tXS1mNU9FLZG1XKELD7oepnhMxK1aSY6Ug7eTZ7mzPEvXu56 LJD+U28zr8ZhpFTvmNucG4pjooSSy/zDpoLzYjbmXIBX+n4mQW25Z0JQYA2M32Wsp6fs sPUg== X-Gm-Message-State: AOJu0YwsjvSdMfnr4S9EUNdaVutacK99IdcvO1HoRMIP2bhVF5qM2YYH ErgmyGUFB3JXxVTDNP08nyo3DQ== X-Google-Smtp-Source: AGHT+IGEHMMgGlTIIx4pngBGR7i1+o1o1tDCUpM8BHyWuTNwF1HfHYMSCsZ72RQz9pChhJhwauJruw== X-Received: by 2002:a05:600c:a3af:b0:40c:2c36:2a23 with SMTP id hn47-20020a05600ca3af00b0040c2c362a23mr4038457wmb.180.1702487603916; Wed, 13 Dec 2023 09:13:23 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id fs27-20020a05600c3f9b00b0040b36050f1bsm20711039wmb.44.2023.12.13.09.13.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 13 Dec 2023 09:13:23 -0800 (PST) From: Neil Armstrong Date: Wed, 13 Dec 2023 18:13:17 +0100 Subject: [PATCH v13 3/4] Input: goodix-berlin - add I2C support for Goodix Berlin Touchscreen IC Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231213-topic-goodix-berlin-upstream-initial-v13-3-5d7a26a5eaa2@linaro.org> References: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> In-Reply-To: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> To: Dmitry Torokhov , linux-input@vger.kernel.org Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bastien Nocera , Hans de Goede , Henrik Rydberg , Jeff LaBundy , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=4539; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=/29OxaflwzQer1E/gOu8Bz3LG+5phtsz3jcz094am9k=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBleeYu47Op4hdNJnatpilIR9IsMvIUgFeoNQrGH4i9 FZN5BfuJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZXnmLgAKCRB33NvayMhJ0XlED/ 9jQxCkGe9yo9aVigft/mk6hC094hF3kONRfxFWKmclqOjFtp8eVV0pItHXub98E+2aYIwpu6RphJxP ZX3zoPqEEmiCcviE6cLgZ+eWCsnQJoDmXNXUNPpzUgV9rNPfGtJJb2KEnvpCa5PXwn8SwAyXEknqWU zIxiCEHbytJ3sMvJN/NFccXzjGzw4cgSohxtrc7scuJVYB6yPlh+4xGAt47HLq/YkuL3+6zbZ3aFEc HuMl3rZfOokgAkseOUt+dGhkDw14zSbqaQbWuH/UwSd2L4venNMKkWVpQPx/zcsg81MqkLzrYlE2LH 7hQWlMTabLUOaWhp7zZViMDOBj2ehX7SWQDpsJ+zv3Kyg0BPyIoiv9YOpKgnucdAs8WfEsXzpRSCuZ bd/aLiUXafrxPHOWgtonO5ubTI8i+bX5LnFCfjMpFDX715KVzmOPdMxWFQkaC49CkIgL/RQJB/wQGr kcHlDhgj7f/+3XEzvwiucVRpvBOVF+aXR3mN+xdSmCJri6LvzYYUv4YdkFIAHYDsVHkvV081jcY3+A OZypCIZykLbssWH37mlb/nt+7qMnz1BrKe1PpoIpqBtktRrkTmC9NuAv742XmTvn+hwu9/VGXrsaLP J7zBH6FDV6iIdtS5V9MVRvdnwF0IM24K3vmpHa8yE6iqBtS3Ywe6gKTOGh9A== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add initial support for the new Goodix "Berlin" touchscreen ICs over the I2C interface. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy Signed-off-by: Neil Armstrong --- drivers/input/touchscreen/Kconfig | 14 +++++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/goodix_berlin_i2c.c | 74 +++++++++++++++++++++++++++ 3 files changed, 89 insertions(+) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 950da599ae1a..cc7b88118158 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -419,6 +419,20 @@ config TOUCHSCREEN_GOODIX config TOUCHSCREEN_GOODIX_BERLIN_CORE tristate +config TOUCHSCREEN_GOODIX_BERLIN_I2C + tristate "Goodix Berlin I2C touchscreen" + depends on I2C + select REGMAP_I2C + select TOUCHSCREEN_GOODIX_BERLIN_CORE + help + Say Y here if you have a Goodix Berlin IC connected to + your system via I2C. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called goodix_berlin_i2c. + config TOUCHSCREEN_HIDEEP tristate "HiDeep Touch IC" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 2e2f3e70cd2c..7ef677cf7a10 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_TOUCHSCREEN_EXC3000) += exc3000.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o diff --git a/drivers/input/touchscreen/goodix_berlin_i2c.c b/drivers/input/touchscreen/goodix_berlin_i2c.c new file mode 100644 index 000000000000..4d5bcc101569 --- /dev/null +++ b/drivers/input/touchscreen/goodix_berlin_i2c.c @@ -0,0 +1,74 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Goodix Berlin Touchscreen Driver + * + * Copyright (C) 2020 - 2021 Goodix, Inc. + * Copyright (C) 2023 Linaro Ltd. + * + * Based on goodix_ts_berlin driver. + */ +#include +#include +#include +#include + +#include "goodix_berlin.h" + +#define I2C_MAX_TRANSFER_SIZE 256 + +static const struct regmap_config goodix_berlin_i2c_regmap_conf = { + .reg_bits = 32, + .val_bits = 8, + .max_raw_read = I2C_MAX_TRANSFER_SIZE, + .max_raw_write = I2C_MAX_TRANSFER_SIZE, +}; + +/* vendor & product left unassigned here, should probably be updated from fw info */ +static const struct input_id goodix_berlin_i2c_input_id = { + .bustype = BUS_I2C, +}; + +static int goodix_berlin_i2c_probe(struct i2c_client *client) +{ + struct regmap *regmap; + int error; + + regmap = devm_regmap_init_i2c(client, &goodix_berlin_i2c_regmap_conf); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + error = goodix_berlin_probe(&client->dev, client->irq, + &goodix_berlin_i2c_input_id, regmap); + if (error) + return error; + + return 0; +} + +static const struct i2c_device_id goodix_berlin_i2c_id[] = { + { "gt9916", 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, goodix_berlin_i2c_id); + +static const struct of_device_id goodix_berlin_i2c_of_match[] = { + { .compatible = "goodix,gt9916", }, + { } +}; +MODULE_DEVICE_TABLE(of, goodix_berlin_i2c_of_match); + +static struct i2c_driver goodix_berlin_i2c_driver = { + .driver = { + .name = "goodix-berlin-i2c", + .of_match_table = goodix_berlin_i2c_of_match, + .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), + }, + .probe = goodix_berlin_i2c_probe, + .id_table = goodix_berlin_i2c_id, +}; +module_i2c_driver(goodix_berlin_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Goodix Berlin I2C Touchscreen driver"); +MODULE_AUTHOR("Neil Armstrong "); From patchwork Wed Dec 13 17:13:18 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Neil Armstrong X-Patchwork-Id: 754090 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=linaro.org header.i=@linaro.org header.b="hX6BtFlN" Received: from mail-wm1-x32b.google.com (mail-wm1-x32b.google.com [IPv6:2a00:1450:4864:20::32b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8213D111 for ; Wed, 13 Dec 2023 09:13:26 -0800 (PST) Received: by mail-wm1-x32b.google.com with SMTP id 5b1f17b1804b1-40c48d7a7a7so30725015e9.3 for ; Wed, 13 Dec 2023 09:13:26 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1702487605; x=1703092405; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=OxnVNSfczT25XAfpC4X+ICgFqABO9v8W+zLZSFvXeiM=; b=hX6BtFlNsUUCBB0i8bCvZMu4X7wMObrGy9LdpvXrch8K0+YJNanC7FLiKCczDgumh9 hGL8BWCtWR5+RU9E4Bn4A+ElaHl0OnJxG+kqPtQpZLQpt7nroEQDUWP/Eid0He+ViV3W EcO19EHBaJngHQMq+mIGN5wYfSamAtxQh2xSeZR9JxB97Oi4RSR5O/KRAdwyNDRF+a81 OHOQl929bB/TtzHHYubfEd0T7ekbiLxLop2mGZvH/Xz+Od1lkLHt4tyevk1+2ftIw0IV sI6zyWrGLLtphO0ew8CepCVFH/vaCSjaySWuPt7oBatdHwrmAIKegQ9HG4gXWb2matn4 bRng== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1702487605; x=1703092405; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=OxnVNSfczT25XAfpC4X+ICgFqABO9v8W+zLZSFvXeiM=; b=VjvfqK3IVeWrEQUjJsnF0asItf8fGMVf+HmZ2JOt3WUaGy/utFy3c8KHYgaHjovCGr axWN8SIFlvtD4CjH4hbjctnq/YqJfjMnS4z7EGfWt8MyIkaegIeGoD75YzJnUsYIoZHz 2JBBBEZeb8QFCnpeBQ5T1wxiwjhnVJJI30FVcrT5JmfM6hk87qAIVxcS6fNIaefda/+/ R70keuW8dZGrDHpJTrpMmENsIVV2akUX242Kdp+rT8o3ed010Sm7Y1PK57ptGdnS13F+ J6KQFU+d7jFjgPGanSK45+g6DetdYp9fJ5CTgxps0CLYmgKc/tKPtR/E5XK0BL3GaLUW MqzQ== X-Gm-Message-State: AOJu0YxJc3FX64UM1bDD85QS81bmP8tHKmyYKQodzK4P9Msd4u6l/qXq wBoJ1+t6XTjp3+H0hic4y7h32w== X-Google-Smtp-Source: AGHT+IH1Dl/k4FwHknd8WNNERXzxdIk6D8+u0zwliSjifrDoKxzr6a7uVHIVoXTJdh3ZToafzMMAog== X-Received: by 2002:a7b:cb95:0:b0:40c:1946:be03 with SMTP id m21-20020a7bcb95000000b0040c1946be03mr4836755wmi.111.1702487604922; Wed, 13 Dec 2023 09:13:24 -0800 (PST) Received: from arrakeen.starnux.net ([2a01:e0a:982:cbb0:52eb:f6ff:feb3:451a]) by smtp.gmail.com with ESMTPSA id fs27-20020a05600c3f9b00b0040b36050f1bsm20711039wmb.44.2023.12.13.09.13.24 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 13 Dec 2023 09:13:24 -0800 (PST) From: Neil Armstrong Date: Wed, 13 Dec 2023 18:13:18 +0100 Subject: [PATCH v13 4/4] Input: goodix-berlin - add SPI support for Goodix Berlin Touchscreen IC Precedence: bulk X-Mailing-List: linux-input@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20231213-topic-goodix-berlin-upstream-initial-v13-4-5d7a26a5eaa2@linaro.org> References: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> In-Reply-To: <20231213-topic-goodix-berlin-upstream-initial-v13-0-5d7a26a5eaa2@linaro.org> To: Dmitry Torokhov , linux-input@vger.kernel.org Cc: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Bastien Nocera , Hans de Goede , Henrik Rydberg , Jeff LaBundy , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Neil Armstrong X-Mailer: b4 0.12.4 X-Developer-Signature: v=1; a=openpgp-sha256; l=8067; i=neil.armstrong@linaro.org; h=from:subject:message-id; bh=IRI86qOlgcP+lY+pewvMbMLCeQCDU17m1zaFOv0kod4=; b=owEBbQKS/ZANAwAKAXfc29rIyEnRAcsmYgBleeYvm2BQ9H2qKM6nS0xv74oPM4C33GxAOi+ExNtj 8mdRKHmJAjMEAAEKAB0WIQQ9U8YmyFYF/h30LIt33NvayMhJ0QUCZXnmLwAKCRB33NvayMhJ0fTZD/ 0ZG9+BCUZUOLEafoYDv3lf0SVGpWUHaYlnxTJlOEhinj8XyDpYjKo+Ip+GtDYL9/JSQfZNjBjwcK8A lcFFgyJNT87qoO3YlvdK/w1WCkbr2IWV8N4oAnoBqyujlKIhabzvbsSjG12SLdYzZg56KDQofxPmHn KQyPCd+ZpKoR/zVBwTrW747Y+F9S8iVuKbWPVddiiuSSqsigiooH8v9sTiJweXdocBgQ7IjKf6Z4Pg ospue5EQSVHUWp1AgyPFJadiA5inG+iRY3rcJRHiecmP2v1YB8aY7iEjS1bR6FUWEX91x+zMBoAhf4 n0dQ4eU969a1cPRjJawnGsFifxGJioSQ4kgVf2ZSsdJ1gn5s5XhX31ZIfT3R3/CkjqjxK3v8Fasxlx I2gOjwudIIGQlOK6Oc3pvj1+7tUwX+muVudZfWnpynnsWzEt84/B+iBN7N9eYegSNjmheJ3/iWgE1X 5yEQCy2CdXEcIpFQ9+2on5L3Ch9aMFs2Mes0nnZY75B0rImaaSFmKuCuXLR/8iPZiL8BePgtixTQfR 7XYVWqrMqoHaEKaI9TEEtcDchbRivuqum7vennT/x1k1Vrp0djzU3oRl/WAm5JfpeF64XZdA+lXS/r +htNOaIUoxo9aOb6aSItt1vzq5e5cjKtpqmELzcB0CrZp6blI3YuQ4W8VVwg== X-Developer-Key: i=neil.armstrong@linaro.org; a=openpgp; fpr=89EC3D058446217450F22848169AB7B1A4CFF8AE Add initial support for the new Goodix "Berlin" touchscreen ICs over the SPI interface. The driver doesn't use the regmap_spi code since the SPI messages needs to be prefixed, thus this custom regmap code. This initial driver is derived from the Goodix goodix_ts_berlin available at [1] and [2] and only supports the GT9916 IC present on the Qualcomm SM8550 MTP & QRD touch panel. The current implementation only supports BerlinD, aka GT9916. [1] https://github.com/goodix/goodix_ts_berlin [2] https://git.codelinaro.org/clo/la/platform/vendor/opensource/touch-drivers Reviewed-by: Jeff LaBundy Signed-off-by: Neil Armstrong --- drivers/input/touchscreen/Kconfig | 14 ++ drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/goodix_berlin_spi.c | 177 ++++++++++++++++++++++++++ 3 files changed, 192 insertions(+) diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index cc7b88118158..c821fe3ee794 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -433,6 +433,20 @@ config TOUCHSCREEN_GOODIX_BERLIN_I2C To compile this driver as a module, choose M here: the module will be called goodix_berlin_i2c. +config TOUCHSCREEN_GOODIX_BERLIN_SPI + tristate "Goodix Berlin SPI touchscreen" + depends on SPI_MASTER + select REGMAP + select TOUCHSCREEN_GOODIX_BERLIN_CORE + help + Say Y here if you have a Goodix Berlin IC connected to + your system via SPI. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called goodix_berlin_spi. + config TOUCHSCREEN_HIDEEP tristate "HiDeep Touch IC" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 7ef677cf7a10..a81cb5aa21a5 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix_ts.o obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_CORE) += goodix_berlin_core.o obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_I2C) += goodix_berlin_i2c.o +obj-$(CONFIG_TOUCHSCREEN_GOODIX_BERLIN_SPI) += goodix_berlin_spi.o obj-$(CONFIG_TOUCHSCREEN_HIDEEP) += hideep.o obj-$(CONFIG_TOUCHSCREEN_HYNITRON_CSTXXX) += hynitron_cstxxx.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o diff --git a/drivers/input/touchscreen/goodix_berlin_spi.c b/drivers/input/touchscreen/goodix_berlin_spi.c new file mode 100644 index 000000000000..502b143e9e05 --- /dev/null +++ b/drivers/input/touchscreen/goodix_berlin_spi.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Goodix Berlin Touchscreen Driver + * + * Copyright (C) 2020 - 2021 Goodix, Inc. + * Copyright (C) 2023 Linaro Ltd. + * + * Based on goodix_ts_berlin driver. + */ +#include +#include +#include +#include +#include + +#include "goodix_berlin.h" + +#define GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN 1 +#define GOODIX_BERLIN_REGISTER_WIDTH 4 +#define GOODIX_BERLIN_SPI_READ_DUMMY_LEN 3 +#define GOODIX_BERLIN_SPI_READ_PREFIX_LEN (GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \ + GOODIX_BERLIN_REGISTER_WIDTH + \ + GOODIX_BERLIN_SPI_READ_DUMMY_LEN) +#define GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN (GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + \ + GOODIX_BERLIN_REGISTER_WIDTH) + +#define GOODIX_BERLIN_SPI_WRITE_FLAG 0xF0 +#define GOODIX_BERLIN_SPI_READ_FLAG 0xF1 + +static int goodix_berlin_spi_read(void *context, const void *reg_buf, + size_t reg_size, void *val_buf, + size_t val_size) +{ + struct spi_device *spi = context; + struct spi_transfer xfers; + struct spi_message spi_msg; + const u32 *reg = reg_buf; /* reg is stored as native u32 at start of buffer */ + u8 *buf; + int error; + + if (reg_size != GOODIX_BERLIN_REGISTER_WIDTH) + return -EINVAL; + + buf = kzalloc(GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_message_init(&spi_msg); + memset(&xfers, 0, sizeof(xfers)); + + /* buffer format: 0xF1 + addr(4bytes) + dummy(3bytes) + data */ + buf[0] = GOODIX_BERLIN_SPI_READ_FLAG; + put_unaligned_be32(*reg, buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN); + memset(buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN + GOODIX_BERLIN_REGISTER_WIDTH, + 0xff, GOODIX_BERLIN_SPI_READ_DUMMY_LEN); + + xfers.tx_buf = buf; + xfers.rx_buf = buf; + xfers.len = GOODIX_BERLIN_SPI_READ_PREFIX_LEN + val_size; + xfers.cs_change = 0; + spi_message_add_tail(&xfers, &spi_msg); + + error = spi_sync(spi, &spi_msg); + if (error < 0) + dev_err(&spi->dev, "spi transfer error, %d", error); + else + memcpy(val_buf, buf + GOODIX_BERLIN_SPI_READ_PREFIX_LEN, val_size); + + kfree(buf); + return error; +} + +static int goodix_berlin_spi_write(void *context, const void *data, + size_t count) +{ + unsigned int len = count - GOODIX_BERLIN_REGISTER_WIDTH; + struct spi_device *spi = context; + struct spi_transfer xfers; + struct spi_message spi_msg; + const u32 *reg = data; /* reg is stored as native u32 at start of buffer */ + u8 *buf; + int error; + + buf = kzalloc(GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN + len, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_message_init(&spi_msg); + memset(&xfers, 0, sizeof(xfers)); + + buf[0] = GOODIX_BERLIN_SPI_WRITE_FLAG; + put_unaligned_be32(*reg, buf + GOODIX_BERLIN_SPI_TRANS_PREFIX_LEN); + memcpy(buf + GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN, + data + GOODIX_BERLIN_REGISTER_WIDTH, len); + + xfers.tx_buf = buf; + xfers.len = GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN + len; + xfers.cs_change = 0; + spi_message_add_tail(&xfers, &spi_msg); + + error = spi_sync(spi, &spi_msg); + if (error < 0) + dev_err(&spi->dev, "spi transfer error, %d", error); + + kfree(buf); + return error; +} + +static const struct regmap_config goodix_berlin_spi_regmap_conf = { + .reg_bits = 32, + .val_bits = 8, + .read = goodix_berlin_spi_read, + .write = goodix_berlin_spi_write, +}; + +/* vendor & product left unassigned here, should probably be updated from fw info */ +static const struct input_id goodix_berlin_spi_input_id = { + .bustype = BUS_SPI, +}; + +static int goodix_berlin_spi_probe(struct spi_device *spi) +{ + struct regmap_config regmap_config; + struct regmap *regmap; + size_t max_size; + int error = 0; + + spi->mode = SPI_MODE_0; + spi->bits_per_word = 8; + error = spi_setup(spi); + if (error) + return error; + + max_size = spi_max_transfer_size(spi); + + regmap_config = goodix_berlin_spi_regmap_conf; + regmap_config.max_raw_read = max_size - GOODIX_BERLIN_SPI_READ_PREFIX_LEN; + regmap_config.max_raw_write = max_size - GOODIX_BERLIN_SPI_WRITE_PREFIX_LEN; + + regmap = devm_regmap_init(&spi->dev, NULL, spi, ®map_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + error = goodix_berlin_probe(&spi->dev, spi->irq, + &goodix_berlin_spi_input_id, regmap); + if (error) + return error; + + return 0; +} + +static const struct spi_device_id goodix_berlin_spi_ids[] = { + { "gt9916" }, + { }, +}; +MODULE_DEVICE_TABLE(spi, goodix_berlin_spi_ids); + +static const struct of_device_id goodix_berlin_spi_of_match[] = { + { .compatible = "goodix,gt9916", }, + { } +}; +MODULE_DEVICE_TABLE(of, goodix_berlin_spi_of_match); + +static struct spi_driver goodix_berlin_spi_driver = { + .driver = { + .name = "goodix-berlin-spi", + .of_match_table = goodix_berlin_spi_of_match, + .pm = pm_sleep_ptr(&goodix_berlin_pm_ops), + }, + .probe = goodix_berlin_spi_probe, + .id_table = goodix_berlin_spi_ids, +}; +module_spi_driver(goodix_berlin_spi_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Goodix Berlin SPI Touchscreen driver"); +MODULE_AUTHOR("Neil Armstrong ");