From patchwork Tue Sep 19 09:34:49 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Matyas, Daniel" X-Patchwork-Id: 724480 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 308938460 for ; Tue, 19 Sep 2023 09:36:05 +0000 (UTC) Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 76DEBE4; Tue, 19 Sep 2023 02:35:48 -0700 (PDT) Received: from pps.filterd (m0167089.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 38J9Wwxo008779; Tue, 19 Sep 2023 05:35:20 -0400 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3t5s7kn4hq-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 19 Sep 2023 05:35:20 -0400 (EDT) Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 38J9ZJoW054837 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 19 Sep 2023 05:35:19 -0400 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Tue, 19 Sep 2023 05:35:18 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Tue, 19 Sep 2023 05:35:18 -0400 Received: from daniel-Precision-5530.ad.analog.com ([10.48.65.230]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 38J9Z1d6030605; Tue, 19 Sep 2023 05:35:04 -0400 From: Daniel Matyas To: CC: Daniel Matyas , Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , , , , Subject: [PATCH v4 1/7] hwmon: max31827: Make code cleaner Date: Tue, 19 Sep 2023 12:34:49 +0300 Message-ID: <20230919093456.10592-1-daniel.matyas@analog.com> X-Mailer: git-send-email 2.34.1 Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: lWtAzz9lqoLdxFBHdQp3FxJ70A47brQS X-Proofpoint-ORIG-GUID: lWtAzz9lqoLdxFBHdQp3FxJ70A47brQS X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.267,Aquarius:18.0.980,Hydra:6.0.601,FMLib:17.11.176.26 definitions=2023-09-19_04,2023-09-18_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 malwarescore=0 mlxscore=0 clxscore=1015 bulkscore=0 priorityscore=1501 impostorscore=0 mlxlogscore=999 spamscore=0 lowpriorityscore=0 adultscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2308100000 definitions=main-2309190080 X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_NONE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Used enums and while loops to replace switch for selecting and getting update interval from conversion rate bits. Divided the write_alarm_val function into 2 functions. The new function is more generic: it can be used not only for alarm writes, but for any kind of writes which require the device to be in shutdown mode. Signed-off-by: Daniel Matyas --- v3 -> v4: Put the wait time modification in another patch. v2 -> v3: No change. v2: Added patch. drivers/hwmon/max31827.c | 125 +++++++++++++++++---------------------- 1 file changed, 55 insertions(+), 70 deletions(-) diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c index 602f4e4f81ff..47124d665fa7 100644 --- a/drivers/hwmon/max31827.c +++ b/drivers/hwmon/max31827.c @@ -27,18 +27,30 @@ #define MAX31827_12_BIT_CNV_TIME 141 -#define MAX31827_CNV_1_DIV_64_HZ 0x1 -#define MAX31827_CNV_1_DIV_32_HZ 0x2 -#define MAX31827_CNV_1_DIV_16_HZ 0x3 -#define MAX31827_CNV_1_DIV_4_HZ 0x4 -#define MAX31827_CNV_1_HZ 0x5 -#define MAX31827_CNV_4_HZ 0x6 -#define MAX31827_CNV_8_HZ 0x7 - #define MAX31827_16_BIT_TO_M_DGR(x) (sign_extend32(x, 15) * 1000 / 16) #define MAX31827_M_DGR_TO_16_BIT(x) (((x) << 4) / 1000) #define MAX31827_DEVICE_ENABLE(x) ((x) ? 0xA : 0x0) +enum max31827_cnv { + MAX31827_CNV_1_DIV_64_HZ = 1, + MAX31827_CNV_1_DIV_32_HZ, + MAX31827_CNV_1_DIV_16_HZ, + MAX31827_CNV_1_DIV_4_HZ, + MAX31827_CNV_1_HZ, + MAX31827_CNV_4_HZ, + MAX31827_CNV_8_HZ, +}; + +static const u16 max31827_conversions[] = { + [MAX31827_CNV_1_DIV_64_HZ] = 64000, + [MAX31827_CNV_1_DIV_32_HZ] = 32000, + [MAX31827_CNV_1_DIV_16_HZ] = 16000, + [MAX31827_CNV_1_DIV_4_HZ] = 4000, + [MAX31827_CNV_1_HZ] = 1000, + [MAX31827_CNV_4_HZ] = 250, + [MAX31827_CNV_8_HZ] = 125, +}; + struct max31827_state { /* * Prevent simultaneous access to the i2c client. @@ -54,15 +66,13 @@ static const struct regmap_config max31827_regmap = { .max_register = 0xA, }; -static int write_alarm_val(struct max31827_state *st, unsigned int reg, - long val) +static int shutdown_write(struct max31827_state *st, unsigned int reg, + unsigned int val) { unsigned int cfg; - unsigned int tmp; + unsigned int cnv_rate; int ret; - val = MAX31827_M_DGR_TO_16_BIT(val); - /* * Before the Temperature Threshold Alarm and Alarm Hysteresis Threshold * register values are changed over I2C, the part must be in shutdown @@ -82,9 +92,10 @@ static int write_alarm_val(struct max31827_state *st, unsigned int reg, if (ret) goto unlock; - tmp = cfg & ~(MAX31827_CONFIGURATION_1SHOT_MASK | + cnv_rate = MAX31827_CONFIGURATION_CNV_RATE_MASK & cfg; + cfg = cfg & ~(MAX31827_CONFIGURATION_1SHOT_MASK | MAX31827_CONFIGURATION_CNV_RATE_MASK); - ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, tmp); + ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, cfg); if (ret) goto unlock; @@ -92,13 +103,23 @@ static int write_alarm_val(struct max31827_state *st, unsigned int reg, if (ret) goto unlock; - ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, cfg); + ret = regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG, + MAX31827_CONFIGURATION_CNV_RATE_MASK, + cnv_rate); unlock: mutex_unlock(&st->lock); return ret; } +static int write_alarm_val(struct max31827_state *st, unsigned int reg, + long val) +{ + val = MAX31827_M_DGR_TO_16_BIT(val); + + return shutdown_write(st, reg, val); +} + static umode_t max31827_is_visible(const void *state, enum hwmon_sensor_types type, u32 attr, int channel) @@ -243,32 +264,7 @@ static int max31827_read(struct device *dev, enum hwmon_sensor_types type, uval = FIELD_GET(MAX31827_CONFIGURATION_CNV_RATE_MASK, uval); - switch (uval) { - case MAX31827_CNV_1_DIV_64_HZ: - *val = 64000; - break; - case MAX31827_CNV_1_DIV_32_HZ: - *val = 32000; - break; - case MAX31827_CNV_1_DIV_16_HZ: - *val = 16000; - break; - case MAX31827_CNV_1_DIV_4_HZ: - *val = 4000; - break; - case MAX31827_CNV_1_HZ: - *val = 1000; - break; - case MAX31827_CNV_4_HZ: - *val = 250; - break; - case MAX31827_CNV_8_HZ: - *val = 125; - break; - default: - *val = 0; - break; - } + *val = max31827_conversions[uval]; } break; @@ -284,6 +280,7 @@ static int max31827_write(struct device *dev, enum hwmon_sensor_types type, u32 attr, int channel, long val) { struct max31827_state *st = dev_get_drvdata(dev); + int res = 1; int ret; switch (type) { @@ -333,39 +330,27 @@ static int max31827_write(struct device *dev, enum hwmon_sensor_types type, if (!st->enable) return -EINVAL; - switch (val) { - case 125: - val = MAX31827_CNV_8_HZ; - break; - case 250: - val = MAX31827_CNV_4_HZ; - break; - case 1000: - val = MAX31827_CNV_1_HZ; - break; - case 4000: - val = MAX31827_CNV_1_DIV_4_HZ; - break; - case 16000: - val = MAX31827_CNV_1_DIV_16_HZ; - break; - case 32000: - val = MAX31827_CNV_1_DIV_32_HZ; - break; - case 64000: - val = MAX31827_CNV_1_DIV_64_HZ; - break; - default: - return -EINVAL; - } + /* + * Convert the desired conversion rate into register + * bits. res is already initialized with 1. + * + * This was inspired by lm73 driver. + */ + while (res < ARRAY_SIZE(max31827_conversions) && + val < max31827_conversions[res]) + res++; + + if (res == ARRAY_SIZE(max31827_conversions) || + val != max31827_conversions[res]) + return -EOPNOTSUPP; - val = FIELD_PREP(MAX31827_CONFIGURATION_CNV_RATE_MASK, - val); + res = FIELD_PREP(MAX31827_CONFIGURATION_CNV_RATE_MASK, + res); return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG, MAX31827_CONFIGURATION_CNV_RATE_MASK, - val); + res); } break; From patchwork Tue Sep 19 09:34:51 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Matyas, Daniel" X-Patchwork-Id: 724482 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id D51625687 for ; Tue, 19 Sep 2023 09:36:05 +0000 (UTC) Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3FC53E6; Tue, 19 Sep 2023 02:35:50 -0700 (PDT) Received: from pps.filterd (m0167089.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 38J8FW13001581; Tue, 19 Sep 2023 05:35:25 -0400 Received: from nwd2mta3.analog.com ([137.71.173.56]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3t5s7kn4hr-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 19 Sep 2023 05:35:24 -0400 (EDT) Received: from ASHBMBX9.ad.analog.com (ASHBMBX9.ad.analog.com [10.64.17.10]) by nwd2mta3.analog.com (8.14.7/8.14.7) with ESMTP id 38J9ZNka007691 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 19 Sep 2023 05:35:23 -0400 Received: from ASHBMBX9.ad.analog.com (10.64.17.10) by ASHBMBX9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Tue, 19 Sep 2023 05:35:22 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx9.ad.analog.com (10.64.17.10) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Tue, 19 Sep 2023 05:35:22 -0400 Received: from daniel-Precision-5530.ad.analog.com ([10.48.65.230]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 38J9Z1d8030605; Tue, 19 Sep 2023 05:35:16 -0400 From: Daniel Matyas To: CC: Daniel Matyas , Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , , , , Subject: [PATCH v4 3/7] dt-bindings: hwmon: Add possible new properties to max31827 bindings Date: Tue, 19 Sep 2023 12:34:51 +0300 Message-ID: <20230919093456.10592-3-daniel.matyas@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230919093456.10592-1-daniel.matyas@analog.com> References: <20230919093456.10592-1-daniel.matyas@analog.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: BsOc3vwKK_u-s5Cp3dEOwaeHggD-G10J X-Proofpoint-ORIG-GUID: BsOc3vwKK_u-s5Cp3dEOwaeHggD-G10J X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.267,Aquarius:18.0.980,Hydra:6.0.601,FMLib:17.11.176.26 definitions=2023-09-19_04,2023-09-18_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 malwarescore=0 mlxscore=0 clxscore=1015 bulkscore=0 priorityscore=1501 impostorscore=0 mlxlogscore=999 spamscore=0 lowpriorityscore=0 adultscore=0 phishscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2308100000 definitions=main-2309190080 X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_NONE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net These modify the corresponding bits in the configuration register. adi,comp-int is a hardware property, because it affects the behavior of the interrupt signal and whatever it is connected to. adi,timeout-enable is a hardware property, because it affects i2c bus operation. Signed-off-by: Daniel Matyas --- v3 -> v4: Changed property names (adi,flt-q = adi,fault-q; adi,alrm-pol = adi,alarm-pol). Expressed default values in binding. v2 -> v3: Changed commit subject and message v1 -> v2: Added adi,timeout-enable property to binding. Fixed dt_binding_check errors. .../bindings/hwmon/adi,max31827.yaml | 66 +++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml index 2dc8b07b4d3b..f60e06ab7d0a 100644 --- a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml +++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml @@ -32,6 +32,68 @@ properties: Must have values in the interval (1.6V; 3.6V) in order for the device to function correctly. + adi,comp-int: + description: + If present interrupt mode is used. If not present comparator mode is used + (default). + type: boolean + + adi,alarm-pol: + description: + Sets the alarms active state. + - 0 = active low + - 1 = active high + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + + adi,fault-q: + description: + Select how many consecutive temperature faults must occur before + overtemperature or undertemperature faults are indicated in the + corresponding status bits. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 4, 8] + + adi,timeout-enable: + description: + Enables timeout. Bus timeout resets the I2C-compatible interface when SCL + is low for more than 30ms (nominal). + type: boolean + +allOf: + - if: + properties: + compatible: + contains: + const: adi,max31829 + + then: + properties: + adi,alarm-pol: + default: 1 + + else: + properties: + adi,alarm-pol: + default: 0 + + - if: + properties: + compatible: + contains: + const: adi,max31827 + + then: + properties: + adi,fault-q: + default: 1 + + else: + properties: + adi,fault-q: + default: 4 + + required: - compatible - reg @@ -49,6 +111,10 @@ examples: compatible = "adi,max31827"; reg = <0x42>; vref-supply = <®_vdd>; + adi,comp-int; + adi,alarm-pol = <0>; + adi,fault-q = <1>; + adi,timeout-enable; }; }; ... From patchwork Tue Sep 19 09:34:52 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Matyas, Daniel" X-Patchwork-Id: 724481 Received: from lindbergh.monkeyblade.net (lindbergh.monkeyblade.net [23.128.96.19]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id C5A8F29A0 for ; Tue, 19 Sep 2023 09:36:05 +0000 (UTC) Received: from mx0a-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5D1F6EA; Tue, 19 Sep 2023 02:35:52 -0700 (PDT) Received: from pps.filterd (m0167088.ppops.net [127.0.0.1]) by mx0a-00128a01.pphosted.com (8.17.1.22/8.17.1.22) with ESMTP id 38J7ZCwq031240; Tue, 19 Sep 2023 05:35:32 -0400 Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0a-00128a01.pphosted.com (PPS) with ESMTPS id 3t6gc20e2n-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 19 Sep 2023 05:35:31 -0400 (EDT) Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 38J9ZUF5054843 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Tue, 19 Sep 2023 05:35:30 -0400 Received: from ASHBCASHYB5.ad.analog.com (10.64.17.133) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Tue, 19 Sep 2023 05:35:29 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBCASHYB5.ad.analog.com (10.64.17.133) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Tue, 19 Sep 2023 05:35:29 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Tue, 19 Sep 2023 05:35:29 -0400 Received: from daniel-Precision-5530.ad.analog.com ([10.48.65.230]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 38J9Z1d9030605; Tue, 19 Sep 2023 05:35:19 -0400 From: Daniel Matyas To: CC: Daniel Matyas , kernel test robot , Jean Delvare , Guenter Roeck , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Jonathan Corbet , , , , Subject: [PATCH v4 4/7] hwmon: max31827: Handle new properties from the devicetree Date: Tue, 19 Sep 2023 12:34:52 +0300 Message-ID: <20230919093456.10592-4-daniel.matyas@analog.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230919093456.10592-1-daniel.matyas@analog.com> References: <20230919093456.10592-1-daniel.matyas@analog.com> Precedence: bulk X-Mailing-List: devicetree@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-GUID: nEdO611BmGZ52ZQ2IvY_Q6qw1gPCVoYC X-Proofpoint-ORIG-GUID: nEdO611BmGZ52ZQ2IvY_Q6qw1gPCVoYC X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.267,Aquarius:18.0.980,Hydra:6.0.601,FMLib:17.11.176.26 definitions=2023-09-19_04,2023-09-18_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 mlxlogscore=999 priorityscore=1501 impostorscore=0 malwarescore=0 adultscore=0 lowpriorityscore=0 phishscore=0 bulkscore=0 suspectscore=0 clxscore=1015 spamscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2308100000 definitions=main-2309190078 X-Spam-Status: No, score=-1.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_BLOCKED,SPF_HELO_NONE,SPF_NONE autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Used fwnode to retrieve data from the devicetree in the init_client function. If the uint32 properties are not present, the default values are used for max31827 chip. Signed-off-by: Daniel Matyas --- v3 -> v4: Renamed property names to correspond with binding. v2 -> v3: Separated patch into 2. Fixed 'WARNING: Unexpected indentation.' Reported-by: kernel test robot v2: Added patch Documentation/hwmon/max31827.rst | 48 ++++++++++++++---- drivers/hwmon/max31827.c | 85 +++++++++++++++++++++++++++++--- 2 files changed, 116 insertions(+), 17 deletions(-) diff --git a/Documentation/hwmon/max31827.rst b/Documentation/hwmon/max31827.rst index 9a1055a007cf..a8bbfb85dd02 100644 --- a/Documentation/hwmon/max31827.rst +++ b/Documentation/hwmon/max31827.rst @@ -52,13 +52,21 @@ MAX31827 has low and over temperature alarms with an effective value and a hysteresis value: -40 and -30 degrees for under temperature alarm and +100 and +90 degrees for over temperature alarm. -The alarm can be configured in comparator and interrupt mode. Currently only -comparator mode is implemented. In Comparator mode, the OT/UT status bits have a -value of 1 when the temperature rises above the TH value or falls below TL, -which is also subject to the Fault Queue selection. OT status returns to 0 when -the temperature drops below the TH_HYST value or when shutdown mode is entered. -Similarly, UT status returns to 0 when the temperature rises above TL_HYST value -or when shutdown mode is entered. +The alarm can be configured in comparator and interrupt mode from the +devicetree. In Comparator mode, the OT/UT status bits have a value of 1 when the +temperature rises above the TH value or falls below TL, which is also subject to +the Fault Queue selection. OT status returns to 0 when the temperature drops +below the TH_HYST value or when shutdown mode is entered. Similarly, UT status +returns to 0 when the temperature rises above TL_HYST value or when shutdown +mode is entered. + +In interrupt mode exceeding TH also sets OT status to 1, which remains set until +a read operation is performed on the configuration/status register (max or min +attribute); at this point, it returns to 0. Once OT status is set to 1 from +exceeding TH and reset, it is set to 1 again only when the temperature drops +below TH_HYST. The output remains asserted until it is reset by a read. It is +set again if the temperature rises above TH, and so on. The same logic applies +to the operation of the UT status bit. Putting the MAX31827 into shutdown mode also resets the OT/UT status bits. Note that if the mode is changed while OT/UT status bits are set, an OT/UT status @@ -68,6 +76,18 @@ clear the status bits before changing the operating mode. The conversions can be manual with the one-shot functionality and automatic with a set frequency. When powered on, the chip measures temperatures with 1 conv/s. +The conversion rate can be modified with update_interval attribute of the chip. +Conversion/second = 1/update_interval. Thus, the available options according to +the data sheet are: + +- 64000 (ms) = 1 conv/64 sec +- 32000 (ms) = 1 conv/32 sec +- 16000 (ms) = 1 conv/16 sec +- 4000 (ms) = 1 conv/4 sec +- 1000 (ms) = 1 conv/sec (default) +- 250 (ms) = 4 conv/sec +- 125 (ms) = 8 conv/sec + Enabling the device when it is already enabled has the side effect of setting the conversion frequency to 1 conv/s. The conversion time varies depending on the resolution. The conversion time doubles with every bit of increased @@ -83,8 +103,18 @@ in the writing of alarm values too. For positive numbers the user-input value will always be rounded down to the nearest possible value, for negative numbers the user-input will always be rounded up to the nearest possible value. +Bus timeout resets the I2C-compatible interface when SCL is low for more than +30ms (nominal). + +Alarm polarity determines if the active state of the alarm is low or high. The +behavior for both settings is dependent on the Fault Queue setting. The ALARM +pin is an open-drain output and requires a pullup resistor to operate. + +The Fault Queue bits select how many consecutive temperature faults must occur +before overtemperature or undertemperature faults are indicated in the +corresponding status bits. + Notes ----- -Currently fault queue, alarm polarity and resolution cannot be modified. -PEC is not implemented either. +PEC and resolution are not implemented. diff --git a/drivers/hwmon/max31827.c b/drivers/hwmon/max31827.c index f05762219995..2bddca60666d 100644 --- a/drivers/hwmon/max31827.c +++ b/drivers/hwmon/max31827.c @@ -12,6 +12,19 @@ #include #include #include +#include +#include + +/* + * gcc turns __builtin_ffsll() into a call to __ffsdi2(), which is not provided + * by every architecture. __ffs64() is available on all architectures, but the + * result is not defined if no bits are set. + */ +#define max31827__bf_shf(x) \ + ({ \ + typeof(x) x_ = (x); \ + ((x_) != 0) ? __ffs64(x_) : 0x0; \ + }) #define MAX31827_T_REG 0x0 #define MAX31827_CONFIGURATION_REG 0x2 @@ -22,11 +35,19 @@ #define MAX31827_CONFIGURATION_1SHOT_MASK BIT(0) #define MAX31827_CONFIGURATION_CNV_RATE_MASK GENMASK(3, 1) -#define MAX31827_CONFIGURATION_U_TEMP_STAT_MASK BIT(14) -#define MAX31827_CONFIGURATION_O_TEMP_STAT_MASK BIT(15) +#define MAX31827_CONFIGURATION_TIMEOUT_MASK BIT(5) +#define MAX31827_CONFIGURATION_RESOLUTION_MASK GENMASK(7, 6) +#define MAX31827_CONFIGURATION_ALRM_POL_MASK BIT(8) +#define MAX31827_CONFIGURATION_COMP_INT_MASK BIT(9) +#define MAX31827_CONFIGURATION_FLT_Q_MASK GENMASK(11, 10) +#define MAX31827_CONFIGURATION_U_TEMP_STAT_MASK BIT(14) +#define MAX31827_CONFIGURATION_O_TEMP_STAT_MASK BIT(15) #define MAX31827_12_BIT_CNV_TIME 140 +#define MAX31827_ALRM_POL_LOW 0x0 +#define MAX31827_FLT_Q_1 0x0 + #define MAX31827_16_BIT_TO_M_DGR(x) (sign_extend32(x, 15) * 1000 / 16) #define MAX31827_M_DGR_TO_16_BIT(x) (((x) << 4) / 1000) #define MAX31827_DEVICE_ENABLE(x) ((x) ? 0xA : 0x0) @@ -58,6 +79,7 @@ struct max31827_state { struct mutex lock; struct regmap *regmap; bool enable; + struct i2c_client *client; }; static const struct regmap_config max31827_regmap = { @@ -361,14 +383,57 @@ static int max31827_write(struct device *dev, enum hwmon_sensor_types type, return -EOPNOTSUPP; } -static int max31827_init_client(struct max31827_state *st) +static int max31827_init_client(struct max31827_state *st, + struct fwnode_handle *fwnode) { + bool prop; + u32 data, lsb_idx; + unsigned int res = 0; + int ret; + st->enable = true; + res |= MAX31827_DEVICE_ENABLE(1); + + res |= MAX31827_CONFIGURATION_RESOLUTION_MASK; + + prop = fwnode_property_read_bool(fwnode, "adi,comp-int"); + res |= FIELD_PREP(MAX31827_CONFIGURATION_COMP_INT_MASK, prop); + + prop = fwnode_property_read_bool(fwnode, "adi,timeout-enable"); + res |= FIELD_PREP(MAX31827_CONFIGURATION_TIMEOUT_MASK, !prop); + + if (fwnode_property_present(fwnode, "adi,alarm-pol")) { + ret = fwnode_property_read_u32(fwnode, "adi,alarm-pol", &data); + if (ret) + return ret; - return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG, - MAX31827_CONFIGURATION_1SHOT_MASK | - MAX31827_CONFIGURATION_CNV_RATE_MASK, - MAX31827_DEVICE_ENABLE(1)); + res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK, !!data); + } else { + res |= FIELD_PREP(MAX31827_CONFIGURATION_ALRM_POL_MASK, + MAX31827_ALRM_POL_LOW); + } + + if (fwnode_property_present(fwnode, "adi,fault-q")) { + ret = fwnode_property_read_u32(fwnode, "adi,fault-q", &data); + if (ret) + return ret; + + /* + * Convert the desired fault queue into register bits. + */ + lsb_idx = max31827__bf_shf(data); + if (lsb_idx > 3 || data != BIT(lsb_idx)) { + dev_err(&st->client->dev, "Invalid data in fault queue\n"); + return -EOPNOTSUPP; + } + + res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK, lsb_idx); + } else { + res |= FIELD_PREP(MAX31827_CONFIGURATION_FLT_Q_MASK, + MAX31827_FLT_Q_1); + } + + return regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, res); } static const struct hwmon_channel_info *max31827_info[] = { @@ -396,6 +461,7 @@ static int max31827_probe(struct i2c_client *client) struct device *dev = &client->dev; struct device *hwmon_dev; struct max31827_state *st; + struct fwnode_handle *fwnode; int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) @@ -412,7 +478,10 @@ static int max31827_probe(struct i2c_client *client) return dev_err_probe(dev, PTR_ERR(st->regmap), "Failed to allocate regmap.\n"); - err = max31827_init_client(st); + st->client = client; + fwnode = dev_fwnode(dev); + + err = max31827_init_client(st, fwnode); if (err) return err;