From patchwork Fri Sep 15 03:11:21 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 723404 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id EE059EEAA42 for ; Fri, 15 Sep 2023 03:12:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231758AbjIODMR (ORCPT ); Thu, 14 Sep 2023 23:12:17 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49232 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229767AbjIODMQ (ORCPT ); Thu, 14 Sep 2023 23:12:16 -0400 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2112.outbound.protection.outlook.com [40.107.215.112]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id AFF6F26A4; Thu, 14 Sep 2023 20:12:11 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=bNr4nSiyfXQzxasy4skvXLHG1toraO3ige6RGaIQe1PNRPwe+OooEBQY4NOGFX3+K8MGOG+bsiq4PyIRCKYwEpRHcJiJy32M9YaLQoC8VFgEMq2lY9wU7n2gP3VE5HQzH15BY3Lab2usub0v9nwZ6PrIHCOR0iGeHNsdOMw3KM8K/XtD6pWPpjepODz8b3QxxjZinvSgedqJFsg4Vcrkqt7HE7GrvWFxbYUyL5J9lzd0knOWziEb39ESqhJEej4K8aD1uKZmIu8/++I6waj3FAycaR5Xxb5tkN5OJrvhj1IldvJWqf5Yrr9PvYakqpnw55sOCw0lTRuWMR5bCVXxxQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=K2XBTr83M9b1TR4vEAsxJ8kiqCI6dJl6F9Z0gK9Z1Io=; b=gXBMWy83zFOzZ4uz6SGMulebNEHsyLMq4AHVnnezhSB/FZg3G3t7V9zXkBrOx0eUsBYFWfIdgPrgO7w1REJWxWA9mYit9lLPdg9Iq57Rfx7tlsDnNd27EMjnQNK0g35lhBShTF3eOOHDehnK/ZEawbcFIxLTtLDdlNJ+ZJNAxe6mOjWmyODtDFF8e2enr4aQwkH8CH3QVrx3za/r2bxAuC9KVTik/RGxjfnOt6Hl3MPJvR2IkbQDQdih5xhr08heG6cOxT3wGpAs4V9vq/fnOpU0zh90a/i07IuILC/ALoEoM2HPXdnYWgS9UOAwP4yZ8jPqIFZQBua+nBY0WOolMw== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by JH0PR06MB6654.apcprd06.prod.outlook.com (2603:1096:990:36::12) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6792.21; Fri, 15 Sep 2023 03:12:07 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0%4]) with mapi id 15.20.6792.021; Fri, 15 Sep 2023 03:12:07 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V6 1/3] mfd: Add support for UP board CPLD/FPGA Date: Fri, 15 Sep 2023 11:11:21 +0800 Message-Id: <20230915031123.14515-2-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230915031123.14515-1-larry.lai@yunjingtech.com> References: <20230915031123.14515-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYCP286CA0099.JPNP286.PROD.OUTLOOK.COM (2603:1096:400:2b4::17) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|JH0PR06MB6654:EE_ X-MS-Office365-Filtering-Correlation-Id: a0a89e7a-de28-48ec-f83e-08dbb5998ad2 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SEYPR06MB6507.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(366004)(136003)(396003)(39830400003)(346002)(376002)(451199024)(1800799009)(186009)(36756003)(38350700002)(38100700002)(86362001)(52116002)(6666004)(4326008)(6486002)(478600001)(2906002)(30864003)(8936002)(8676002)(41300700001)(5660300002)(6512007)(6506007)(83380400001)(54906003)(316002)(66556008)(66946007)(66476007)(1076003)(2616005)(26005); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: a0a89e7a-de28-48ec-f83e-08dbb5998ad2 X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Sep 2023 03:12:06.8887 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: y2XmXiFgeXOwHdkWpn41TYpUd39HWHUnSyu28M9dH/NkKcGPUwPieqrvdxEKxa5UnCKc7O2lYLt+jbs/FsQ3NBEWDfI1/6CbVNDTUFBltyQ= X-MS-Exchange-Transport-CrossTenantHeadersStamped: JH0PR06MB6654 Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The UP Squared board implements certain features (pin control, onboard LEDs or CEC) through an on-board CPLD/FPGA. This driver implements the line protocol to read and write registers from the FPGA through regmap. The register address map is also included. The UP Boards provide a few I/O pin headers (for both GPIO and functions), including a 40-pin Raspberry Pi compatible header. This patch implements support for the FPGA-based pin controller that manages direction and enable state for those header pins. Partial support UP boards: * UP core + CREX * UP core + CRST02 Reported-by: kernel test robot Signed-off-by: Gary Wang Signed-off-by: larry.lai --- PATCH V5 -> PATCH V6 (1) Fixed kernel test robot compiler warning. PATCH V4 -> PATCH V5 (1) Refer 2023/05/25 Lee Jones review, cleaned up coding style and addressed review comments. (2) Synchronizing upboard github to v1.0.5 tag. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 -> RFC 2023/04/25 (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V3 -> RFC 2022/11/23: (1) Refer 2022/11/16 Lee Jones review, cleaned up coding style and addressed review comments. (2) Description on the UP Boards FPGA register read/write protocols PATCH V2 -> V3: (1) fixed kernel test robot compiler warning. PATCH V1 -> V2: (1) Synchronizing upboard github to rc2. (2) Refer 2022/10/31 Lee Jones review, fixed some of the issues. --- drivers/mfd/Kconfig | 12 + drivers/mfd/Makefile | 1 + drivers/mfd/upboard-fpga.c | 492 +++++++++++++++++++++++++++++++ include/linux/mfd/upboard-fpga.h | 55 ++++ 4 files changed, 560 insertions(+) create mode 100644 drivers/mfd/upboard-fpga.c create mode 100644 include/linux/mfd/upboard-fpga.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index abb58ab1a1a4..1041e937fc7a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -2104,6 +2104,18 @@ config MFD_QCOM_PM8008 under it in the device tree. Additional drivers must be enabled in order to use the functionality of the device. +config MFD_INTEL_UPBOARD_FPGA + tristate "Support for the Intel platform foundation kit UP board FPGA" + select MFD_CORE + depends on X86 && ACPI + help + Select this option to enable the Intel AAEON UP and UP^2 on-board FPGA. + This is core driver for the UP board that implements certain (pin + control, onboard LEDs or CEC) through an on-board FPGA. + + To compile this driver as a module, choose M here: the module will be + called upboard-fpga. + menu "Multimedia Capabilities Port drivers" depends on ARCH_SA1100 diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 858cacf659d6..8374a05f6f43 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -250,6 +250,7 @@ obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o obj-$(CONFIG_MFD_ALTERA_SYSMGR) += altera-sysmgr.o obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o +obj-$(CONFIG_MFD_INTEL_UPBOARD_FPGA) += upboard-fpga.o obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o obj-$(CONFIG_MFD_STM32_TIMERS) += stm32-timers.o diff --git a/drivers/mfd/upboard-fpga.c b/drivers/mfd/upboard-fpga.c new file mode 100644 index 000000000000..b5c36f9dbfdd --- /dev/null +++ b/drivers/mfd/upboard-fpga.c @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board for control CPLD/FPGA to + * provide more GPIO driving power also provide CPLD LEDs and pin mux function + * recognize HID AANT0F00 ~ AAANT0F04 in ACPI name space + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct upboard_fpga_data { + const struct regmap_config *regmap_config; + const struct mfd_cell *cells; + size_t ncells; +}; + +static struct gpio_led_platform_data pdata; + +#define RESET_DEVICE 1 +#define ENABLE_DEVICE 1 + +#define AAEON_MANUFACTURER_ID 0x01 +#define SUPPORTED_FW_MAJOR 0x0 +#define MENUFACTURER_ID_MASK GENMASK(7, 0) + +#define FIRMWARE_ID_BUILD_OFFSET 12 +#define FIRMWARE_ID_MAJOR_OFFSET 8 +#define FIRMWARE_ID_MINOR_OFFSET 4 +#define FIRMWARE_ID_PATCH_OFFSET 0 +#define FIRMWARE_ID_MASK GENMASK(3, 0) + +/* + * read CPLD register on custom protocol + * send clock and addr bit in strobe and datain pins then read from dataout pin + */ +static int upboard_fpga_read(void *context, unsigned int reg, unsigned int *val) +{ + struct upboard_fpga * const fpga = context; + int i; + + /* clear to start new transcation */ + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + reg |= UPFPGA_READ_FLAG; + + /* send clock and data from strobe & datain */ + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + *val = 0; + + /* read from dataout */ + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + *val |= gpiod_get_value(fpga->dataout_gpio) << i; + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +/* + * write CPLD register on custom protocol + * send clock and addr bit in strobe and datain pins then write to datain pin + */ +static int upboard_fpga_write(void *context, unsigned int reg, unsigned int val) +{ + struct upboard_fpga * const fpga = context; + int i; + + /* clear to start new transcation */ + gpiod_set_value(fpga->clear_gpio, 0); + gpiod_set_value(fpga->clear_gpio, 1); + + /* send clock and data from strobe & datain */ + for (i = UPFPGA_ADDRESS_SIZE; i >= 0; i--) { + gpiod_set_value(fpga->strobe_gpio, 0); + gpiod_set_value(fpga->datain_gpio, !!(reg & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + } + + gpiod_set_value(fpga->strobe_gpio, 0); + + /* write to datain pin */ + for (i = UPFPGA_REGISTER_SIZE - 1; i >= 0; i--) { + gpiod_set_value(fpga->datain_gpio, !!(val & BIT(i))); + gpiod_set_value(fpga->strobe_gpio, 1); + gpiod_set_value(fpga->strobe_gpio, 0); + } + + gpiod_set_value(fpga->strobe_gpio, 1); + + return 0; +} + +static const struct regmap_range upboard_up_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_range upboard_up_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN0), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR1), +}; + +static const struct regmap_access_table upboard_up_readable_table = { + .yes_ranges = upboard_up_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_readable_ranges), +}; + +static const struct regmap_access_table upboard_up_writable_table = { + .yes_ranges = upboard_up_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up_writable_ranges), +}; + +static const struct regmap_config upboard_up_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up_readable_table, + .wr_table = &upboard_up_writable_table, +}; + +/* 3 LEDs controlled by CPLD */ +static struct upboard_led_data upboard_up_led_data[] = { + { .bit = 0, .colour = "yellow" }, + { .bit = 1, .colour = "green" }, + { .bit = 2, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up_mfd_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[0], + sizeof(*upboard_up_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[1], + sizeof(*upboard_up_led_data), 2), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up_led_data[2], + sizeof(*upboard_up_led_data), 3), +}; + +/* UP Squared 6000 EHL board */ + +static const struct upboard_fpga_data upboard_up_fpga_data = { + .regmap_config = &upboard_up_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static const struct mfd_cell upboard_pinctrl_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), +}; + +static const struct upboard_fpga_data upboard_pinctrl_data = { + .regmap_config = &upboard_up_regmap_config, + .cells = upboard_pinctrl_cells, + .ncells = ARRAY_SIZE(upboard_pinctrl_cells), +}; + +/* UP^2 board */ +static const struct regmap_range upboard_up2_readable_ranges[] = { + regmap_reg_range(UPFPGA_REG_PLATFORM_ID, UPFPGA_REG_FIRMWARE_ID), + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_range upboard_up2_writable_ranges[] = { + regmap_reg_range(UPFPGA_REG_FUNC_EN0, UPFPGA_REG_FUNC_EN1), + regmap_reg_range(UPFPGA_REG_GPIO_EN0, UPFPGA_REG_GPIO_EN2), + regmap_reg_range(UPFPGA_REG_GPIO_DIR0, UPFPGA_REG_GPIO_DIR2), +}; + +static const struct regmap_access_table upboard_up2_readable_table = { + .yes_ranges = upboard_up2_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_readable_ranges), +}; + +static const struct regmap_access_table upboard_up2_writable_table = { + .yes_ranges = upboard_up2_writable_ranges, + .n_yes_ranges = ARRAY_SIZE(upboard_up2_writable_ranges), +}; + +static const struct regmap_config upboard_up2_regmap_config = { + .reg_bits = UPFPGA_ADDRESS_SIZE, + .val_bits = UPFPGA_REGISTER_SIZE, + .max_register = UPFPGA_REG_MAX, + .reg_read = upboard_fpga_read, + .reg_write = upboard_fpga_write, + .fast_io = false, + .cache_type = REGCACHE_NONE, + .rd_table = &upboard_up2_readable_table, + .wr_table = &upboard_up2_writable_table, +}; + +static struct upboard_led_data upboard_up2_led_data[] = { + { .bit = 0, .colour = "blue" }, + { .bit = 1, .colour = "yellow" }, + { .bit = 2, .colour = "green" }, + { .bit = 3, .colour = "red" }, +}; + +static const struct mfd_cell upboard_up2_mfd_cells[] = { + MFD_CELL_NAME("upboard-pinctrl"), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[0], + sizeof(*upboard_up2_led_data), 1), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[1], + sizeof(*upboard_up2_led_data), 2), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[2], + sizeof(*upboard_up2_led_data), 3), + MFD_CELL_BASIC("upboard-led", NULL, &upboard_up2_led_data[3], + sizeof(*upboard_up2_led_data), 4), +}; + +static const struct upboard_fpga_data upboard_up2_fpga_data = { + .regmap_config = &upboard_up2_regmap_config, + .cells = upboard_up2_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up2_mfd_cells), +}; + +/* UP-CRST02 carrier board for UP Core */ + +/* same MAX10 config as UP2, but same LED cells as UP1 */ +static const struct upboard_fpga_data upboard_upcore_crst02_fpga_data = { + .regmap_config = &upboard_up2_regmap_config, + .cells = upboard_up_mfd_cells, + .ncells = ARRAY_SIZE(upboard_up_mfd_cells), +}; + +static int __init upboard_fpga_gpio_init(struct upboard_fpga *fpga) +{ + enum gpiod_flags flags = fpga->uninitialised ? GPIOD_OUT_LOW : GPIOD_ASIS; + + fpga->enable_gpio = devm_gpiod_get(fpga->dev, "enable", flags); + if (IS_ERR(fpga->enable_gpio)) + return PTR_ERR(fpga->enable_gpio); + + fpga->clear_gpio = devm_gpiod_get(fpga->dev, "clear", GPIOD_OUT_LOW); + if (IS_ERR(fpga->clear_gpio)) + return PTR_ERR(fpga->clear_gpio); + + fpga->strobe_gpio = devm_gpiod_get(fpga->dev, "strobe", GPIOD_OUT_LOW); + if (IS_ERR(fpga->strobe_gpio)) + return PTR_ERR(fpga->strobe_gpio); + + fpga->datain_gpio = devm_gpiod_get(fpga->dev, "datain", GPIOD_OUT_LOW); + if (IS_ERR(fpga->datain_gpio)) + return PTR_ERR(fpga->datain_gpio); + + fpga->dataout_gpio = devm_gpiod_get(fpga->dev, "dataout", GPIOD_IN); + if (IS_ERR(fpga->dataout_gpio)) + return PTR_ERR(fpga->dataout_gpio); + + /* + * The SoC pinctrl driver may not support reserving the GPIO line for + * FPGA reset without causing an undesired reset pulse. This will clear + * any settings on the FPGA, so only do it if we must. + * Reset GPIO defaults HIGH, get GPIO and set to LOW, then set back to + * HIGH as a pulse. + */ + if (fpga->uninitialised) { + fpga->reset_gpio = devm_gpiod_get(fpga->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(fpga->reset_gpio)) + return PTR_ERR(fpga->reset_gpio); + + gpiod_set_value(fpga->reset_gpio, RESET_DEVICE); + } + + gpiod_set_value(fpga->enable_gpio, ENABLE_DEVICE); + fpga->uninitialised = false; + + return 0; +} + +static int __init upboard_fpga_verify_device(struct upboard_fpga *fpga) +{ + unsigned int platform_id, manufacturer_id; + unsigned int firmware_id, build, major, minor, patch; + int ret; + + ret = regmap_read(fpga->regmap, UPFPGA_REG_PLATFORM_ID, &platform_id); + if (ret) + return ret; + + manufacturer_id = platform_id & MENUFACTURER_ID_MASK; + if (manufacturer_id != AAEON_MANUFACTURER_ID) { + dev_err(fpga->dev, + "Manufacturer ID 0x%02x not supported\n", + manufacturer_id); + + return -ENODEV; + } + + ret = regmap_read(fpga->regmap, UPFPGA_REG_FIRMWARE_ID, &firmware_id); + if (ret) + return ret; + + build = (firmware_id >> FIRMWARE_ID_BUILD_OFFSET) & FIRMWARE_ID_MASK; + major = (firmware_id >> FIRMWARE_ID_MAJOR_OFFSET) & FIRMWARE_ID_MASK; + minor = (firmware_id >> FIRMWARE_ID_MINOR_OFFSET) & FIRMWARE_ID_MASK; + patch = (firmware_id >> FIRMWARE_ID_PATCH_OFFSET) & FIRMWARE_ID_MASK; + + if (major != SUPPORTED_FW_MAJOR) { + dev_err(fpga->dev, "Manufacturer ID 0x%02x not supported\n", build); + + return -ENODEV; + } + + dev_info(fpga->dev, "Compatible FPGA FW v%u.%u.%u build 0x%02x", + major, minor, patch, build); + + return 0; +} + +static const struct mfd_cell upboard_gpio_led_cells[] = { + MFD_CELL_BASIC("leds-gpio", NULL, + &pdata, + sizeof(pdata), 0) +}; + +static int upboard_led_gpio_register(struct upboard_fpga *fpga) +{ + struct gpio_led blue_led, yellow_led, green_led, red_led; + struct gpio_desc *desc; + static struct gpio_led leds[4]; + int num_leds = 0; + int ret; + + desc = devm_gpiod_get(fpga->dev, "blue", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + blue_led.name = "upboard:blue:"; + blue_led.gpio = desc_to_gpio(desc); + blue_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = blue_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "yellow", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + yellow_led.name = "upboard:yellow:"; + yellow_led.gpio = desc_to_gpio(desc); + yellow_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = yellow_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "green", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + green_led.name = "upboard:green:"; + green_led.gpio = desc_to_gpio(desc); + green_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = green_led; + devm_gpiod_put(fpga->dev, desc); + } + + desc = devm_gpiod_get(fpga->dev, "red", GPIOD_OUT_LOW); + if (!IS_ERR(desc)) { + red_led.name = "upboard:red:"; + red_led.gpio = desc_to_gpio(desc); + red_led.default_state = LEDS_GPIO_DEFSTATE_KEEP; + leds[num_leds++] = red_led; + devm_gpiod_put(fpga->dev, desc); + } + + /* No optional LEDs defined */ + if (num_leds == 0) + return 0; + + pdata.num_leds = num_leds; + pdata.leds = leds; + + ret = devm_mfd_add_devices(fpga->dev, PLATFORM_DEVID_AUTO, + upboard_gpio_led_cells, + ARRAY_SIZE(upboard_gpio_led_cells), + NULL, 0, NULL); + if (ret) { + dev_err(fpga->dev, "Failed to add GPIO LEDs, %d", ret); + return ret; + } + + return 0; +} + +/* + * -------------------------------------- ------------ + * | Intel SOC,1.8V | --- |ADC Chip | native driver + * | GPIO/I2C/SPI/UART/PWM | |SPI/I2C | + * -------------------------------------- ------------- + * | | + * ---------------------------------------------------------- + * | CPLD/FPGA Driver | upboard-fpga CPLD control driver + * | provide more GPIO driving power | register leds-upboard + * | HAT 40 pin mux function | register pinctrl-upboard + * --------------------------------------------------------- + * | | + * ---------- ------------------------------------------- + * |3 or 4| | HAT 40 pins, 3.3V | leds-upboard + * | Leds | |GPIO/ADC/I2C/SPI/UART/PWM | pinctrl-upboard + * ---------- ------------------------------------------- + */ +static const struct acpi_device_id upboard_fpga_acpi_match[] = { + { "AANT0000", (kernel_ulong_t)&upboard_pinctrl_data }, + { "AANT0F00", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F01", (kernel_ulong_t)&upboard_up2_fpga_data }, + { "AANT0F02", (kernel_ulong_t)&upboard_up_fpga_data }, + { "AANT0F03", (kernel_ulong_t)&upboard_upcore_crst02_fpga_data }, + { "AANT0F04", (kernel_ulong_t)&upboard_up_fpga_data }, + { } +}; +MODULE_DEVICE_TABLE(acpi, upboard_fpga_acpi_match); + +static int __init upboard_fpga_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct upboard_fpga *ddata; + const struct acpi_device_id *id; + const struct upboard_fpga_data *fpga_data; + int ret; + + id = acpi_match_device(upboard_fpga_acpi_match, dev); + if (!id) + return -ENODEV; + + fpga_data = (const struct upboard_fpga_data *) id->driver_data; + + ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL); + if (!ddata) + return -ENOMEM; + + platform_set_drvdata(pdev, ddata); + ddata->dev = dev; + + ddata->regmap = devm_regmap_init(dev, NULL, ddata, fpga_data->regmap_config); + if (IS_ERR(ddata->regmap)) + return PTR_ERR(ddata->regmap); + + ddata->regmap_config = fpga_data->regmap_config; + + ret = upboard_fpga_gpio_init(ddata); + if (ret) { + /* Not FPGA firmware, abort FPGA GPIO initialize process */ + dev_warn(dev, "Failed to initialize FPGA common GPIOs: %d", ret); + } else { + upboard_fpga_verify_device(ddata); + } + + ret = upboard_led_gpio_register(ddata); + if (ret) { + /* LEDs are optional. */ + dev_warn(dev, "Failed to register LEDs: %d", ret); + } + + return devm_mfd_add_devices(dev, PLATFORM_DEVID_AUTO, + fpga_data->cells, + fpga_data->ncells, + NULL, 0, NULL); +} + +static struct platform_driver upboard_fpga_driver = { + .driver = { + .name = "upboard-fpga", + .acpi_match_table = upboard_fpga_acpi_match, + }, +}; +module_platform_driver_probe(upboard_fpga_driver, upboard_fpga_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board CPLD/FPGA driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/mfd/upboard-fpga.h b/include/linux/mfd/upboard-fpga.h new file mode 100644 index 000000000000..d6bf7dd11da8 --- /dev/null +++ b/include/linux/mfd/upboard-fpga.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * UP Board CPLD/FPGA driver + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + * + */ + +#ifndef __MFD_UPBOARD_FPGA_H +#define __MFD_UPBOARD_FPGA_H + +/* CPLD/FPGA protocol version */ +#define UPFPGA_PROTOCOL_V1_HRV 1 +#define UPFPGA_PROTOCOL_V2_HRV 2 + +#define UPFPGA_ADDRESS_SIZE 7 +#define UPFPGA_REGISTER_SIZE 16 + +#define UPFPGA_READ_FLAG BIT(UPFPGA_ADDRESS_SIZE) + +enum upboard_fpgareg { + UPFPGA_REG_PLATFORM_ID = 0x10, + UPFPGA_REG_FIRMWARE_ID = 0x11, + UPFPGA_REG_FUNC_EN0 = 0x20, + UPFPGA_REG_FUNC_EN1 = 0x21, + UPFPGA_REG_GPIO_EN0 = 0x30, + UPFPGA_REG_GPIO_EN1 = 0x31, + UPFPGA_REG_GPIO_EN2 = 0x32, + UPFPGA_REG_GPIO_DIR0 = 0x40, + UPFPGA_REG_GPIO_DIR1 = 0x41, + UPFPGA_REG_GPIO_DIR2 = 0x42, + UPFPGA_REG_MAX, +}; + +struct upboard_fpga { + struct device *dev; + struct regmap *regmap; + const struct regmap_config *regmap_config; + struct gpio_desc *enable_gpio; + struct gpio_desc *reset_gpio; + struct gpio_desc *clear_gpio; + struct gpio_desc *strobe_gpio; + struct gpio_desc *datain_gpio; + struct gpio_desc *dataout_gpio; + bool uninitialised; +}; + +struct upboard_led_data { + unsigned int bit; + const char *colour; +}; + +#endif /* __MFD_UPBOARD_FPGA_H */ From patchwork Fri Sep 15 03:11:22 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 724089 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9571EEE3F01 for ; Fri, 15 Sep 2023 03:12:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231849AbjIODMT (ORCPT ); Thu, 14 Sep 2023 23:12:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49244 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231792AbjIODMS (ORCPT ); Thu, 14 Sep 2023 23:12:18 -0400 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2112.outbound.protection.outlook.com [40.107.215.112]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5366926A4; Thu, 14 Sep 2023 20:12:13 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=WXPxXrFVyIbdLbq+B6NnVNW5eAWqCX4xyNc8RM0+FkEJLlUqugl9VsSNNwbqggNWA5on5eljr9tfWtI6NNprvdLewt274VT1DmYXWv7ZSqcJqjEEwoa6e2aJ3WNvoI+jaLxFZSNqPIf8TTL0+cwEmRs9e5SXKfI5WG9P0znf1kWnEJRdpwJOTodxoQmuhw6L2iJFgPRU9acS4xh0jqj6mbnS+/Xiud12N48MarHCjdgRN2GcIt2Yl3HtVMI152JyA80mVoG9kcuuW+VQOXs8kYsDr8B+emUTyKOuPC7KUJP+ZtUvJhLhXQ/Wt3Zbv88oVhNHS0lLBr09dBkaw+YeQQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=Za2tT8EtCDwU/9nvf8j5PrUAQ+XoWvYDEfn/cls3P3w=; b=CC0m5yaMDT/UH8P2QWvom2Ysn0Ifrl0gDKPzm4+GpfzNLqTsf8nVHb8A1dR9WvuGtfxXTjwcWBJGlFrHql0OvvjQW1pcdiLtbXK5zbd1KRX/uJNPZxqyxSfceY+fzZwTqjZEIpArafkspKiM9Rf3QvhspNsPsmuyULRQygZo9mW9RmYd7FDrGmB7Kty7ZT09PzjAkjE4dGWfwiwnmFkOP6lzNsmS8ZUsvmSZekenziGb51c4ErffdIUA/OPyAru8a9EED95Y6GvcSP5bs/GFBrk5jLK5FnEVCKZe3QkirkERS2v1171xg3hdDJ4F3G9R5FrunyHZuhXYWLYHMu9SaA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by JH0PR06MB6654.apcprd06.prod.outlook.com (2603:1096:990:36::12) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6792.21; Fri, 15 Sep 2023 03:12:09 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0%4]) with mapi id 15.20.6792.021; Fri, 15 Sep 2023 03:12:09 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V6 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA Date: Fri, 15 Sep 2023 11:11:22 +0800 Message-Id: <20230915031123.14515-3-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230915031123.14515-1-larry.lai@yunjingtech.com> References: <20230915031123.14515-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYCP286CA0099.JPNP286.PROD.OUTLOOK.COM (2603:1096:400:2b4::17) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|JH0PR06MB6654:EE_ X-MS-Office365-Filtering-Correlation-Id: ca2aac2c-3420-4574-7cf4-08dbb5998c31 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SEYPR06MB6507.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(366004)(136003)(396003)(39830400003)(346002)(376002)(451199024)(1800799009)(186009)(36756003)(38350700002)(38100700002)(86362001)(52116002)(6666004)(4326008)(6486002)(478600001)(2906002)(30864003)(8936002)(8676002)(41300700001)(5660300002)(6512007)(6506007)(83380400001)(54906003)(316002)(66556008)(66946007)(66476007)(1076003)(2616005)(26005)(579004); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: ca2aac2c-3420-4574-7cf4-08dbb5998c31 X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Sep 2023 03:12:09.2194 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: zZ10hVhVzIk32ALrDZmw4OqOerTnLEqj2CIY2ufT0qglog0H4hhCZLkaBxanPF+/iawhCp+f6cJyTxbQaSgHwcQqK6Ww1znN/EDDTptnu9o= X-MS-Exchange-Transport-CrossTenantHeadersStamped: JH0PR06MB6654 Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The UP Squared board implements certain features (pin control) through an on-board FPGA. Reported-by: kernel test robot Signed-off-by: Gary Wang Signed-off-by: larry.lai Reviewed-by: Linus Walleij --- PATCH V5 -> PATCH V6 (1) Refer 2023/08/10 Linus Walleij review, cleaned up coding style and addressed review comments. PATCH V4 -> PATCH V5 (1) Fixed kernel test robot compiler warning. (2) Synchronizing upboard github to v1.0.5 tag. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 -> RFC 2023/04/25 (1) Refer 2022/12/08 Andy Shevchenko review, cleaned up coding style and addressed review comments. PATCH V3 -> RFC 2022/11/23: (1) Refer 2022/11/09 Linus Walleij review, cleaned up coding style and addressed review comments. PATCH V2 -> V3: There's no change. PATCH V1 -> V2: (1) Synchronized with upboard github to rc2 (2) Refer 2022/10/19 Mark Brown and Andy Shevchenko review, we removed the regmap and acpi patches and implement in upboard pinctrl driver. (3) Refer 2022/10/19 Andy Shevchenko review, fixed the coding style issues, removed using gpio_xxxx API and removed including . --- drivers/pinctrl/Kconfig | 14 + drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-upboard.c | 1390 +++++++++++++++++++++++++++++ 3 files changed, 1405 insertions(+) create mode 100644 drivers/pinctrl/pinctrl-upboard.c diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 1cf74b0c42e5..cc8dae75289b 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -483,6 +483,20 @@ config PINCTRL_THUNDERBAY rate control and direction control. This module will be called as pinctrl-thunderbay. +config PINCTRL_UPBOARD + tristate "UP board FPGA pin controller" + depends on (X86 && ACPI) || COMPILE_TEST + depends on MFD_INTEL_UPBOARD_FPGA + select GENERIC_PINCONF + select PINMUX + select PINCONF + help + Pin controller for the FPGA GPIO lines on UP boards. Due to the + hardware layout, these are meant to be controlled in tandem with their + corresponding Intel SoC GPIOs. + To compile this driver as a module, choose M here: the module + will be called pinctrl-upboard. + config PINCTRL_ZYNQ bool "Pinctrl driver for Xilinx Zynq" depends on ARCH_ZYNQ diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index e76f5cdc64b0..c366706d36e7 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o +obj-$(CONFIG_PINCTRL_UPBOARD) += pinctrl-upboard.o obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o diff --git a/drivers/pinctrl/pinctrl-upboard.c b/drivers/pinctrl/pinctrl-upboard.c new file mode 100644 index 000000000000..73d50a695aab --- /dev/null +++ b/drivers/pinctrl/pinctrl-upboard.c @@ -0,0 +1,1390 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board HAT pin controller driver + * remapping native pin to RPI pin and set CPLD pin dir + * + * Copyright (c) AAEON. All rights reserved. + * + * Authors: Gary Wang + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "core.h" +#include "intel/pinctrl-intel.h" + +/* for older kernel lost DIRECTION_IN/OUT definition */ +#ifndef GPIO_LINE_DIRECTION_IN +#define GPIO_LINE_DIRECTION_IN 1 +#define GPIO_LINE_DIRECTION_OUT 0 +#endif + +/* Offset from regs */ +#define REVID 0x000 +#define REVID_SHIFT 16 +#define REVID_MASK GENMASK(31, 16) +#define PADBAR 0x00c + +/* Offset from pad_regs */ +#define PADCFG0 0x000 +#define PADCFG0_RXEVCFG_SHIFT 25 +#define PADCFG0_RXEVCFG_MASK GENMASK(26, 25) +#define PADCFG0_RXEVCFG_LEVEL 0 +#define PADCFG0_RXEVCFG_EDGE 1 +#define PADCFG0_RXEVCFG_DISABLED 2 +#define PADCFG0_RXEVCFG_EDGE_BOTH 3 +#define PADCFG0_PREGFRXSEL BIT(24) +#define PADCFG0_RXINV BIT(23) +#define PADCFG0_GPIROUTIOXAPIC BIT(20) +#define PADCFG0_GPIROUTSCI BIT(19) +#define PADCFG0_GPIROUTSMI BIT(18) +#define PADCFG0_GPIROUTNMI BIT(17) +#define PADCFG0_PMODE_SHIFT 10 +#define PADCFG0_PMODE_MASK GENMASK(13, 10) +#define PADCFG0_PMODE_GPIO 0 +#define PADCFG0_GPIORXDIS BIT(9) +#define PADCFG0_GPIOTXDIS BIT(8) +#define PADCFG0_GPIORXSTATE BIT(1) +#define PADCFG0_GPIOTXSTATE BIT(0) + +#define PADCFG1 0x004 +#define PADCFG1_TERM_UP BIT(13) +#define PADCFG1_TERM_SHIFT 10 +#define PADCFG1_TERM_MASK GENMASK(12, 10) +#define PADCFG1_TERM_20K BIT(2) +#define PADCFG1_TERM_5K BIT(1) +#define PADCFG1_TERM_1K BIT(0) +#define PADCFG1_TERM_833 (BIT(1) | BIT(0)) + +#define PADCFG2 0x008 +#define PADCFG2_DEBEN BIT(0) +#define PADCFG2_DEBOUNCE_SHIFT 1 +#define PADCFG2_DEBOUNCE_MASK GENMASK(4, 1) + +#define DEBOUNCE_PERIOD_NSEC 31250 + +/* Additional features supported by the hardware */ +#define PINCTRL_FEATURE_DEBOUNCE BIT(0) +#define PINCTRL_FEATURE_1K_PD BIT(1) + +#define BOARD_UP_CHT01 0 +#define BOARD_UP_APL01 1 +#define BOARD_UP_UPCORE 2 +#define BOARD_UP_CORE_PLUS 3 +#define BOARD_AIOT_IP6801 4 +#define BOARD_UP_WHL01 5 +#define BOARD_UP_ISH 7 +#define BOARD_UPN_APL 8 +#define BOARD_UP_APL03 9 +#define BOARD_UPX_WHLite 10 +#define BOARD_UPX_TGL 11 +#define BOARD_UPX_EDGE_WHL2 12 +#define BOARD_UPN_EHL01 13 +#define BOARD_UPS_EHL01 BOARD_UPN_EHL01 +#define BOARD_UPX_ADLP01 15 +#define BOARD_UPN_ADLN01 16 +#define BOARD_UPS_ADLP01 BOARD_UPX_ADLP01 +#define BOARD_UP_ADLN01 18 + +struct upboard_pin { + struct regmap_field *funcbit; + struct regmap_field *enbit; + struct regmap_field *dirbit; + /* native pin controllers: number, base, irq */ + unsigned int gpio; + unsigned int base; + int irq; + void __iomem *regs; +}; + +struct upboard_pinctrl { + struct gpio_chip chip; + struct device *dev; + struct pinctrl_dev *pctldev; + struct pinctrl_desc *pctldesc; + struct upboard_pin *pins; + struct regmap *regmap; + const unsigned int *rpi_mapping; + int ident; +}; + +enum upboard_func0_fpgabit { + UPFPGA_I2C0_EN = 8, + UPFPGA_I2C1_EN = 9, + UPFPGA_CEC0_EN = 12, + UPFPGA_ADC0_EN = 14, +}; + +static const struct reg_field upboard_i2c0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C0_EN, UPFPGA_I2C0_EN); + +static const struct reg_field upboard_i2c1_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C1_EN, UPFPGA_I2C1_EN); + +static const struct reg_field upboard_adc0_reg = + REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_ADC0_EN, UPFPGA_ADC0_EN); + +/* Pin group information */ +struct upboard_pingroup { + const char *name; + const unsigned int *pins; + size_t npins; +}; + +/* Pin function information */ +struct upboard_function { + const char *name; + const char * const *groups; + size_t ngroups; +}; + +#define UPBOARD_BIT_TO_PIN(r, bit) \ + ((r) * UPFPGA_REGISTER_SIZE + (bit)) + +/* + * UP board data + */ + +#define UPBOARD_UP_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP_##id)) + +#define UPBOARD_UP_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UP_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +#define UPBOARD_PIN_GROUP(n, p) \ + { \ + .name = (n), \ + .pins = (p), \ + .npins = ARRAY_SIZE((p)), \ + } + +#define FUNCTION(n, g) \ + { \ + .name = (n), \ + .groups = (g), \ + .ngroups = ARRAY_SIZE((g)), \ + } + +enum upboard_up_reg1_fpgabit { + UPFPGA_UP_I2C1_SDA, + UPFPGA_UP_I2C1_SCL, + UPFPGA_UP_ADC0, + UPFPGA_UP_GPIO17, + UPFPGA_UP_GPIO27, + UPFPGA_UP_GPIO22, + UPFPGA_UP_SPI_MOSI, + UPFPGA_UP_SPI_MISO, + UPFPGA_UP_SPI_CLK, + UPFPGA_UP_I2C0_SDA, + UPFPGA_UP_GPIO5, + UPFPGA_UP_GPIO6, + UPFPGA_UP_PWM1, + UPFPGA_UP_I2S_FRM, + UPFPGA_UP_GPIO26, + UPFPGA_UP_UART1_TX, +}; + +enum upboard_up_reg2_fpgabit { + UPFPGA_UP_UART1_RX, + UPFPGA_UP_I2S_CLK, + UPFPGA_UP_GPIO23, + UPFPGA_UP_GPIO24, + UPFPGA_UP_GPIO25, + UPFPGA_UP_SPI_CS0, + UPFPGA_UP_SPI_CS1, + UPFPGA_UP_I2C0_SCL, + UPFPGA_UP_PWM0, + UPFPGA_UP_GPIO16, + UPFPGA_UP_I2S_DIN, + UPFPGA_UP_I2S_DOUT, +}; + +#define UPFPGA_UP_UART1_RTS UPFPGA_UP_GPIO17 +#define UPFPGA_UP_UART1_CTS UPFPGA_UP_GPIO16 + +static struct pinctrl_pin_desc upboard_up_pins[] = { + UPBOARD_UP_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP_PIN_FUNC(0, ADC0, &upboard_adc0_reg), + UPBOARD_UP_PIN_NAME(0, UART1_RTS), + UPBOARD_UP_PIN_NAME(0, GPIO27), + UPBOARD_UP_PIN_NAME(0, GPIO22), + UPBOARD_UP_PIN_NAME(0, SPI_MOSI), + UPBOARD_UP_PIN_NAME(0, SPI_MISO), + UPBOARD_UP_PIN_NAME(0, SPI_CLK), + UPBOARD_UP_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(0, GPIO5), + UPBOARD_UP_PIN_NAME(0, GPIO6), + UPBOARD_UP_PIN_NAME(0, PWM1), + UPBOARD_UP_PIN_NAME(0, I2S_FRM), + UPBOARD_UP_PIN_NAME(0, GPIO26), + UPBOARD_UP_PIN_NAME(0, UART1_TX), + /* register 1 */ + UPBOARD_UP_PIN_NAME(1, UART1_RX), + UPBOARD_UP_PIN_NAME(1, I2S_CLK), + UPBOARD_UP_PIN_NAME(1, GPIO23), + UPBOARD_UP_PIN_NAME(1, GPIO24), + UPBOARD_UP_PIN_NAME(1, GPIO25), + UPBOARD_UP_PIN_NAME(1, SPI_CS0), + UPBOARD_UP_PIN_NAME(1, SPI_CS1), + UPBOARD_UP_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP_PIN_NAME(1, PWM0), + UPBOARD_UP_PIN_NAME(1, UART1_CTS), + UPBOARD_UP_PIN_NAME(1, I2S_DIN), + UPBOARD_UP_PIN_NAME(1, I2S_DOUT), +}; + +static const unsigned int upboard_up_rpi_mapping[] = { + UPBOARD_UP_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UP_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UP_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UP_BIT_TO_PIN(0, ADC0), + UPBOARD_UP_BIT_TO_PIN(0, GPIO5), + UPBOARD_UP_BIT_TO_PIN(0, GPIO6), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS1), + UPBOARD_UP_BIT_TO_PIN(1, SPI_CS0), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MISO), + UPBOARD_UP_BIT_TO_PIN(0, SPI_MOSI), + UPBOARD_UP_BIT_TO_PIN(0, SPI_CLK), + UPBOARD_UP_BIT_TO_PIN(1, PWM0), + UPBOARD_UP_BIT_TO_PIN(0, PWM1), + UPBOARD_UP_BIT_TO_PIN(0, UART1_TX), + UPBOARD_UP_BIT_TO_PIN(1, UART1_RX), + UPBOARD_UP_BIT_TO_PIN(1, GPIO16), + UPBOARD_UP_BIT_TO_PIN(0, GPIO17), + UPBOARD_UP_BIT_TO_PIN(1, I2S_CLK), + UPBOARD_UP_BIT_TO_PIN(0, I2S_FRM), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DIN), + UPBOARD_UP_BIT_TO_PIN(1, I2S_DOUT), + UPBOARD_UP_BIT_TO_PIN(0, GPIO22), + UPBOARD_UP_BIT_TO_PIN(1, GPIO23), + UPBOARD_UP_BIT_TO_PIN(1, GPIO24), + UPBOARD_UP_BIT_TO_PIN(1, GPIO25), + UPBOARD_UP_BIT_TO_PIN(0, GPIO26), + UPBOARD_UP_BIT_TO_PIN(0, GPIO27), +}; + +static const unsigned int uart1_pins[] = { 14, 15, 16, 17 }; +static const unsigned int uart2_pins[] = { 25, 27 }; +static const unsigned int i2c0_pins[] = { 0, 1 }; +static const unsigned int i2c1_pins[] = { 2, 3 }; +static const unsigned int spi2_pins[] = { 8, 9, 10, 11 }; +static const unsigned int i2s0_pins[] = { 18, 19, 20, 21 }; +static const unsigned int pwm0_pins[] = { 12 }; +static const unsigned int pwm1_pins[] = { 13 }; +static const unsigned int adc0_pins[] = { 4 }; + +static const struct upboard_pingroup pin_groups[] = { + UPBOARD_PIN_GROUP("uart1_grp", uart1_pins), + UPBOARD_PIN_GROUP("uart2_grp", uart2_pins), + UPBOARD_PIN_GROUP("i2c0_grp", i2c0_pins), + UPBOARD_PIN_GROUP("i2c1_grp", i2c1_pins), + UPBOARD_PIN_GROUP("spi2_grp", spi2_pins), + UPBOARD_PIN_GROUP("i2s0_grp", i2s0_pins), + UPBOARD_PIN_GROUP("pwm0_grp", pwm0_pins), + UPBOARD_PIN_GROUP("pwm1_grp", pwm1_pins), + UPBOARD_PIN_GROUP("adc0_grp", adc0_pins), +}; + +static const char * const uart1_groups[] = { "uart1_grp" }; +static const char * const uart2_groups[] = { "uart2_grp" }; +static const char * const i2c0_groups[] = { "i2c0_grp" }; +static const char * const i2c1_groups[] = { "i2c1_grp" }; +static const char * const spi2_groups[] = { "spi2_grp" }; +static const char * const i2s0_groups[] = { "i2s0_grp" }; +static const char * const pwm0_groups[] = { "pwm0_grp" }; +static const char * const pwm1_groups[] = { "pwm1_grp" }; +static const char * const adc0_groups[] = { "adc0_grp" }; + +static const struct upboard_function pin_functions[] = { + FUNCTION("uart1", uart1_groups), + FUNCTION("uart2", uart2_groups), + FUNCTION("i2c0", i2c0_groups), + FUNCTION("i2c1", i2c1_groups), + FUNCTION("spi2", spi2_groups), + FUNCTION("i2s0", i2s0_groups), + FUNCTION("pwm0", pwm0_groups), + FUNCTION("pwm1", pwm1_groups), + FUNCTION("adc0", adc0_groups), +}; + +/* + * UP^2 board data + */ + +#define UPBOARD_UP2_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP2_##id)) + +#define UPBOARD_UP2_PIN_MUX(r, bit, data) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + .name = "PINMUX", \ + .drv_data = (void *)(data), \ + } + +#define UPBOARD_UP2_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UP2_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_up2_reg0_fpgabit { + UPFPGA_UP2_UART1_TXD, + UPFPGA_UP2_UART1_RXD, + UPFPGA_UP2_UART1_RTS, + UPFPGA_UP2_UART1_CTS, + UPFPGA_UP2_GPIO3_ADC0, + UPFPGA_UP2_GPIO5_ADC2, + UPFPGA_UP2_GPIO6_ADC3, + UPFPGA_UP2_GPIO11, + UPFPGA_UP2_EXHAT_LVDS1n, + UPFPGA_UP2_EXHAT_LVDS1p, + UPFPGA_UP2_SPI2_TXD, + UPFPGA_UP2_SPI2_RXD, + UPFPGA_UP2_SPI2_FS1, + UPFPGA_UP2_SPI2_FS0, + UPFPGA_UP2_SPI2_CLK, + UPFPGA_UP2_SPI1_TXD, +}; + +enum upboard_up2_reg1_fpgabit { + UPFPGA_UP2_SPI1_RXD, + UPFPGA_UP2_SPI1_FS1, + UPFPGA_UP2_SPI1_FS0, + UPFPGA_UP2_SPI1_CLK, + UPFPGA_UP2_BIT20, + UPFPGA_UP2_BIT21, + UPFPGA_UP2_BIT22, + UPFPGA_UP2_BIT23, + UPFPGA_UP2_PWM1, + UPFPGA_UP2_PWM0, + UPFPGA_UP2_EXHAT_LVDS0n, + UPFPGA_UP2_EXHAT_LVDS0p, + UPFPGA_UP2_I2C0_SCL, + UPFPGA_UP2_I2C0_SDA, + UPFPGA_UP2_I2C1_SCL, + UPFPGA_UP2_I2C1_SDA, +}; + +enum upboard_up2_reg2_fpgabit { + UPFPGA_UP2_EXHAT_LVDS3n, + UPFPGA_UP2_EXHAT_LVDS3p, + UPFPGA_UP2_EXHAT_LVDS4n, + UPFPGA_UP2_EXHAT_LVDS4p, + UPFPGA_UP2_EXHAT_LVDS5n, + UPFPGA_UP2_EXHAT_LVDS5p, + UPFPGA_UP2_I2S_SDO, + UPFPGA_UP2_I2S_SDI, + UPFPGA_UP2_I2S_WS_SYNC, + UPFPGA_UP2_I2S_BCLK, + UPFPGA_UP2_EXHAT_LVDS6n, + UPFPGA_UP2_EXHAT_LVDS6p, + UPFPGA_UP2_EXHAT_LVDS7n, + UPFPGA_UP2_EXHAT_LVDS7p, + UPFPGA_UP2_EXHAT_LVDS2n, + UPFPGA_UP2_EXHAT_LVDS2p, +}; + +static struct pinctrl_pin_desc upboard_up2_pins[] = { + UPBOARD_UP2_PIN_NAME(0, UART1_TXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RXD), + UPBOARD_UP2_PIN_NAME(0, UART1_RTS), + UPBOARD_UP2_PIN_NAME(0, UART1_CTS), + UPBOARD_UP2_PIN_NAME(0, GPIO3_ADC0), + UPBOARD_UP2_PIN_NAME(0, GPIO5_ADC2), + UPBOARD_UP2_PIN_NAME(0, GPIO6_ADC3), + UPBOARD_UP2_PIN_NAME(0, GPIO11), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1n), + UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1p), + UPBOARD_UP2_PIN_NAME(0, SPI2_TXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_RXD), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS1), + UPBOARD_UP2_PIN_NAME(0, SPI2_FS0), + UPBOARD_UP2_PIN_NAME(0, SPI2_CLK), + UPBOARD_UP2_PIN_NAME(0, SPI1_TXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_RXD), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS1), + UPBOARD_UP2_PIN_NAME(1, SPI1_FS0), + UPBOARD_UP2_PIN_NAME(1, SPI1_CLK), + UPBOARD_UP2_PIN_MUX(1, 4, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_MUX(1, 5, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_MUX(1, 6, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_MUX(1, 7, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_NAME(1, PWM1), + UPBOARD_UP2_PIN_NAME(1, PWM0), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0n), + UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0p), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_FUNC(1, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5p), + UPBOARD_UP2_PIN_NAME(2, I2S_SDO), + UPBOARD_UP2_PIN_NAME(2, I2S_SDI), + UPBOARD_UP2_PIN_NAME(2, I2S_WS_SYNC), + UPBOARD_UP2_PIN_NAME(2, I2S_BCLK), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7p), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2n), + UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2p), +}; + +static const unsigned int upboard_up2_rpi_mapping[] = { + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SCL), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SDA), + UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SCL), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO3_ADC0), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO11), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS1), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS0), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI1_TXD), + UPBOARD_UP2_BIT_TO_PIN(1, SPI1_CLK), + UPBOARD_UP2_BIT_TO_PIN(1, PWM0), + UPBOARD_UP2_BIT_TO_PIN(1, PWM1), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_CTS), + UPBOARD_UP2_BIT_TO_PIN(0, UART1_RTS), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_BCLK), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_WS_SYNC), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDI), + UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDO), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO6_ADC3), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS1), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_RXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_TXD), + UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS0), + UPBOARD_UP2_BIT_TO_PIN(0, GPIO5_ADC2), +}; + +/* + * UP Core board + CREX carrier board data + */ + +#define UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id) \ + (UPBOARD_BIT_TO_PIN(r, UPFPGA_UPCORE_CREX_##id)) + +#define UPBOARD_UPCORE_CREX_PIN_ANON(r, bit) \ + { \ + .number = UPBOARD_BIT_TO_PIN(r, bit), \ + } + +#define UPBOARD_UPCORE_CREX_PIN_NAME(r, id) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + } + +#define UPBOARD_UPCORE_CREX_PIN_FUNC(r, id, data) \ + { \ + .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \ + .name = #id, \ + .drv_data = (void *)(data), \ + } + +enum upboard_upcore_crex_reg1_fpgabit { + UPFPGA_UPCORE_CREX_I2C0_SDA, + UPFPGA_UPCORE_CREX_I2C0_SCL, + UPFPGA_UPCORE_CREX_I2C1_SDA, + UPFPGA_UPCORE_CREX_I2C1_SCL, + UPFPGA_UPCORE_CREX_SPI2_CS0, + UPFPGA_UPCORE_CREX_SPI2_CS1, + UPFPGA_UPCORE_CREX_SPI2_MOSI, + UPFPGA_UPCORE_CREX_SPI2_MISO, + UPFPGA_UPCORE_CREX_SPI2_CLK, + UPFPGA_UPCORE_CREX_UART1_TXD, + UPFPGA_UPCORE_CREX_UART1_RXD, + UPFPGA_UPCORE_CREX_PWM0, + UPFPGA_UPCORE_CREX_PWM1, + UPFPGA_UPCORE_CREX_I2S2_FRM, + UPFPGA_UPCORE_CREX_I2S2_CLK, + UPFPGA_UPCORE_CREX_I2S2_RX, +}; + +enum upboard_upcore_crex_reg2_fpgabit { + UPFPGA_UPCORE_CREX_I2S2_TX, + UPFPGA_UPCORE_CREX_GPIO0, + UPFPGA_UPCORE_CREX_GPIO2, + UPFPGA_UPCORE_CREX_GPIO3, + UPFPGA_UPCORE_CREX_GPIO4, + UPFPGA_UPCORE_CREX_GPIO9, +}; + +static struct pinctrl_pin_desc upboard_upcore_crex_pins[] = { + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SCL, &upboard_i2c0_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_TXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_RXD), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM0), + UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM1), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_RX), + /* register 1 */ + UPBOARD_UPCORE_CREX_PIN_NAME(1, I2S2_TX), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO0), + UPBOARD_UPCORE_CREX_PIN_FUNC(1, GPIO2, &upboard_adc0_reg), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO3), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO4), + UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO9), +}; + +static unsigned int upboard_upcore_crex_rpi_mapping[] = { + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SDA), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SCL), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO2), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO3), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MISO), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MOSI), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM0), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM1), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_TXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_RXD), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO9), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO4), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_CLK), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_FRM), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_RX), + UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, I2S2_TX), +}; + +/* + * UP Core board + CRST02 carrier board data + */ + +#define upboard_upcore_crst02_pins upboard_upcore_crex_pins +#define upboard_upcore_crst02_rpi_mapping upboard_upcore_crex_rpi_mapping + +static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function, + unsigned int group) +{ + return 0; +} + +static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 0); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 1); + if (ret) + return ret; + } + + return 0; +} + +static int upboard_fpga_request_free(struct pinctrl_dev *pctldev, + unsigned int pin) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + int ret; + + p = pd->drv_data; + if (p->funcbit) { + ret = regmap_field_write(p->funcbit, 1); + if (ret) + return ret; + } + + if (p->enbit) { + ret = regmap_field_write(p->enbit, 0); + if (ret) + return ret; + } + + return 0; +} + +static int upboard_fpga_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned int pin, bool input) +{ + const struct pin_desc * const pd = pin_desc_get(pctldev, pin); + const struct upboard_pin *p; + + p = pd->drv_data; + + return regmap_field_write(p->dirbit, input); +} + +static int upboard_get_functions_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *upboard_get_function_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return NULL; +} + +static int upboard_get_function_groups(struct pinctrl_dev *pctldev, + unsigned int selector, + const char * const **groups, + unsigned int *num_groups) +{ + *groups = NULL; + *num_groups = 0; + return 0; +} + +static const struct pinmux_ops upboard_pinmux_ops = { + .get_functions_count = upboard_get_functions_count, + .get_function_groups = upboard_get_function_groups, + .get_function_name = upboard_get_function_name, + .set_mux = upboard_set_mux, + .gpio_request_enable = upboard_fpga_request_enable, + .gpio_set_direction = upboard_fpga_set_direction, +}; + +static int upboard_get_groups_count(struct pinctrl_dev *pctldev) +{ + return 0; +} + +static const char *upboard_get_group_name(struct pinctrl_dev *pctldev, + unsigned int selector) +{ + return NULL; +} + +static void upboard_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, + unsigned int pin) +{ + struct upboard_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev); + void __iomem *padcfg; + u32 cfg0, cfg1, mode; + int locked; + + if (pctrl->pins[pin].regs == NULL) + return; + + cfg0 = readl(pctrl->pins[pin].regs); + cfg1 = readl(pctrl->pins[pin].regs + PADCFG1); + + mode = (cfg0 & PADCFG0_PMODE_MASK) >> PADCFG0_PMODE_SHIFT; + if (mode == PADCFG0_PMODE_GPIO) + seq_puts(s, "GPIO "); + else + seq_printf(s, "mode %d ", mode); + + seq_printf(s, "0x%08x 0x%08x", cfg0, cfg1); + + /* Dump the additional PADCFG registers if available */ + padcfg = pctrl->pins[pin].regs + PADCFG2; + if (padcfg) + seq_printf(s, " 0x%08x", readl(padcfg)); + + seq_printf(s, " 0x%08x", pctrl->pins[pin].regs); +} + +static const struct pinctrl_ops upboard_pinctrl_ops = { + .get_groups_count = upboard_get_groups_count, + .get_group_name = upboard_get_group_name, + .pin_dbg_show = upboard_pin_dbg_show, +}; + +static struct pinctrl_desc upboard_up_pinctrl_desc = { + .pins = upboard_up_pins, + .npins = ARRAY_SIZE(upboard_up_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_up2_pinctrl_desc = { + .pins = upboard_up2_pins, + .npins = ARRAY_SIZE(upboard_up2_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crex_pinctrl_desc = { + .pins = upboard_upcore_crex_pins, + .npins = ARRAY_SIZE(upboard_upcore_crex_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static struct pinctrl_desc upboard_upcore_crst02_pinctrl_desc = { + .pins = upboard_upcore_crst02_pins, + .npins = ARRAY_SIZE(upboard_upcore_crst02_pins), + .pctlops = &upboard_pinctrl_ops, + .pmxops = &upboard_pinmux_ops, + .owner = THIS_MODULE, +}; + +static void upboard_alt_func_enable(struct gpio_chip *gc, const char *name, int id) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int offset[pctrl->pctldesc->npins]; + int i, cnt; + + /* find all pins */ + for (i = 0, cnt = 0; i < pctrl->pctldesc->npins; i++) { + if (strstr(pctrl->pctldesc->pins[i].name, name)) + offset[cnt++] = i; + } + + /* change to alternate function */ + for (i = 0; i < cnt; i++) { + if (pctrl->pins[offset[i]].regs == NULL) + continue; + bool input = false; + int mode = 0; /* default GPIO */ + unsigned int val = readl(pctrl->pins[offset[i]].regs); + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2C") || + strstr(pctrl->pctldesc->pins[offset[i]].name, "PINMUX")) { + mode = 1; + switch (id) { + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 2; + break; + default: + break; + } + + val |= mode<pins[offset[i]].regs); + upboard_fpga_request_free(pctrl->pctldev, offset[i]); + continue; + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "UART")) { + mode = 1; + switch (id) { + case BOARD_UPN_EHL01: + mode = 4; + break; + case BOARD_UP_ADLN01: + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 2; + break; + default: + break; + } + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SPI")) { + mode = 1; + switch (id) { + case BOARD_UP_WHL01: + mode = 3; + break; + case BOARD_UP_ADLN01: + case BOARD_UPN_ADLN01: + case BOARD_UPX_ADLP01: + mode = 7; + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MOSI")) { + val &= ~PADCFG0_GPIOTXDIS; + val |= PADCFG0_GPIORXDIS; + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) + val |= PADCFG0_GPIORXDIS; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CLK")) { + val &= ~PADCFG0_GPIOTXDIS; + val |= PADCFG0_GPIORXDIS; + } + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS0")) + val |= PADCFG0_GPIORXDIS; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CS1")) + continue; + break; + default: + break; + } + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2S")) { + mode = 1; + switch (id) { + case BOARD_UPX_ADLP01: + mode = 4; + break; + default: + break; + } + } + + val |= mode<pins[offset[i]].regs); + + /* input pins */ + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC")) { + input = true; + if (id == BOARD_UP_APL01) + upboard_fpga_request_enable(pctrl->pctldev, NULL, offset[i]); + else + upboard_fpga_request_free(pctrl->pctldev, offset[i]); + } + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN")) + input = true; + + if (strstr(pctrl->pctldesc->pins[offset[i]].name, "SDI")) + input = true; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, offset[i], input); + } +} + +static int upboard_rpi_to_native_gpio(struct gpio_chip *gc, unsigned int gpio) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[gpio]; + struct pinctrl_gpio_range *range; + + range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin); + if (!range) + return -ENODEV; + + return range->base; +} + +static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + + upboard_fpga_request_enable(pctrl->pctldev, NULL, pin); + return pinctrl_gpio_request(gpio); +} + +static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + int gpio = upboard_rpi_to_native_gpio(gc, offset); + unsigned int pin = pctrl->rpi_mapping[offset]; + + pinctrl_gpio_free(gpio); + + upboard_alt_func_enable(gc, pctrl->pctldesc->pins[pin].name, pctrl->ident); +} + +static int upboard_gpio_get_direction(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + if (!pctrl->pins[pin].regs) + return -EINVAL; + + unsigned int padcfg0 = readl(pctrl->pins[pin].regs); + + if (padcfg0 & PADCFG0_GPIOTXDIS) + return GPIO_LINE_DIRECTION_IN; + + return GPIO_LINE_DIRECTION_OUT; +} + +static int upboard_gpio_get(struct gpio_chip *gc, unsigned int offset) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + int reg_val = readl(pctrl->pins[pin].regs); + + if (gpio < 0) + return gpio; + + /* APL03 board open drain GPIO */ + if (pctrl->ident == BOARD_UP_APL03) { + switch (pin) { + case 0: + case 1: + case 9: + case 23: + return reg_val & 0x00000003; + default: + break; + } + } + + if (!(reg_val & PADCFG0_GPIOTXDIS)) + return !!(reg_val & PADCFG0_GPIOTXSTATE); + + return !!(reg_val & PADCFG0_GPIORXSTATE); +} + +static void upboard_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) +{ + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + int gpio = upboard_rpi_to_native_gpio(gc, offset); + int reg_val = readl(pctrl->pins[pin].regs); + + if (gpio < 0) + return; + + /* APL03 board open drain GPIO */ + if (pctrl->ident == BOARD_UP_APL03) { + switch (pin) { + case 0: + case 1: + case 9: + case 23: + if (value) + reg_val |= PADCFG0_GPIOTXDIS; + else + reg_val &= ~PADCFG0_GPIOTXDIS; + + writel(reg_val, pctrl->pins[pin].regs); + return; + default: + break; + } + } + if (value) + reg_val |= PADCFG0_GPIOTXSTATE; + else + reg_val &= ~PADCFG0_GPIOTXSTATE; + writel(reg_val, pctrl->pins[pin].regs); +} + +static int upboard_gpio_direction_input(struct gpio_chip *gc, + unsigned int offset) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, pin, true); + + return pinctrl_gpio_direction_input(gpio); +} + +static int upboard_gpio_direction_output(struct gpio_chip *gc, + unsigned int offset, int value) +{ + int gpio = upboard_rpi_to_native_gpio(gc, offset); + struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip); + unsigned int pin = pctrl->rpi_mapping[offset]; + + upboard_fpga_set_direction(pctrl->pctldev, NULL, pin, false); + + return pinctrl_gpio_direction_output(gpio); +} + +static void __iomem *upboard_get_regs(struct gpio_chip *gc, unsigned int gpio, unsigned int reg) +{ + struct platform_device *pdev = to_platform_device(gc->parent); + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct intel_pinctrl *pctrl = gpiochip_get_data(gc); + size_t nregs; + void __iomem *base = NULL; + u32 offset, value; + int pin = gpio-gc->base; + + /* check Intel pin controller for all platform */ + if (pctrl->ncommunities > 1) { + int i, j, offset = 0; + + pin = -1; + for (i = 0; i < pctrl->ncommunities; i++) { + struct intel_community *community = &pctrl->communities[i]; + + for (j = 0; j < community->ngpps ; j++) { + struct intel_padgroup gpps = community->gpps[j]; + + if (gpio < gc->base + gpps.gpio_base + gpps.size) { + res = platform_get_resource(pdev, IORESOURCE_MEM, + community->barno); + pin = gpio-gc->base-gpps.gpio_base + + offset-community->pin_base; + break; + } + + offset += gpps.size; + } + + if (pin != -1) + break; + } + } + + base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (base == NULL) + return base; + + offset = readl(base + PADBAR); + value = readl(base + REVID); + + if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94) + nregs = 4; + else + nregs = 2; + + return base + offset + reg + pin * nregs * 4; +} + +int upboard_acpi_node_pin_mapping(struct upboard_fpga *fpga, + struct upboard_pinctrl *pctrl, + const char *propname, + const char *pinctl_name, + unsigned int pin_offset) +{ + struct gpio_descs *descs; + int ret, i; + + descs = devm_gpiod_get_array(fpga->dev, propname, GPIOD_ASIS); + if (IS_ERR(descs)) { + ret = PTR_ERR(descs); + if (ret != -EPROBE_DEFER) + dev_err(fpga->dev, "Failed to get %s gpios", propname); + + return ret; + } + + for (i = 0; i < descs->ndescs; i++) { + struct gpio_desc *desc = descs->desc[i]; + struct gpio_chip *gc = gpiod_to_chip(desc); + + pctrl->pins[i].gpio = desc_to_gpio(desc); + pctrl->pins[i].base = gc->base; + pctrl->pins[i].irq = gpiod_to_irq(desc); + pctrl->pins[i].regs = + upboard_get_regs(gc, + desc_to_gpio(desc) - gc->base, + PADCFG0); + + /* The GPIOs may not be contiguous, so add them 1-by-1 */ + ret = gpiochip_add_pin_range(gpiod_to_chip(desc), pinctl_name, + desc_to_gpio(desc) - gc->base, + pin_offset + i, 1); + + if (ret) + return ret; + } + + /* dispose acpi resource */ + devm_gpiod_put_array(fpga->dev, descs); + + return ret; +} + +static struct gpio_chip upboard_gpio_chip = { + .label = "Raspberry Pi compatible UP GPIO", + .base = 0, + .request = upboard_gpio_request, + .free = upboard_gpio_free, + .get = upboard_gpio_get, + .set = upboard_gpio_set, + .get_direction = upboard_gpio_get_direction, + .direction_input = upboard_gpio_direction_input, + .direction_output = upboard_gpio_direction_output, + .owner = THIS_MODULE, +}; + +/* DMI Matches to assign pin mapping driver data */ +static const struct dmi_system_id upboard_dmi_table[] __initconst = { + { + .ident = BOARD_UP_APL01, + .matches = { /* UP SQUARED */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"), + }, + }, + { + .ident = BOARD_UP_APL01, + .matches = { /* UP SQUARED Pro*/ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-APL01"), + }, + }, + { + .ident = BOARD_UP_APL03, + .matches = { /* UP 4000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"), + }, + }, + { + .ident = BOARD_UP_WHL01, + .matches = { /* UPX WHL */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-WHL01"), + }, + }, + { + .ident = BOARD_UPX_TGL, + .matches = { /* UP i11 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-TGL01"), + }, + }, + { + .ident = BOARD_UPN_EHL01, + .matches = { /* UP 6000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"), + }, + }, + { + .ident = BOARD_UPS_EHL01, + .matches = { /* UP squared v2 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"), + }, + }, + { + .ident = BOARD_UPX_ADLP01, + .matches = { /* UP Xtreme i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"), + }, + }, + { + .ident = BOARD_UPN_ADLN01, + .matches = { /* UP 7000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-ADLN01"), + }, + }, + { + .ident = BOARD_UPS_ADLP01, + .matches = { /* UP Squared i12 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-ADLP01"), + }, + }, + { + .ident = BOARD_UP_ADLN01, + .matches = { /* UP 7000 */ + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"), + DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-ADLN01"), + }, + }, + { } /* Terminating entry */ +}; + +static int __init upboard_pinctrl_probe(struct platform_device *pdev) +{ + struct upboard_fpga * const fpga = dev_get_drvdata(pdev->dev.parent); + struct pinctrl_desc *pctldesc; + struct upboard_pinctrl *pctrl; + struct upboard_pin *pins; + const struct dmi_system_id *system_id; + const unsigned int *rpi_mapping; + unsigned int ngpio; + int ret; + int i; + /* default */ + int board_id = BOARD_UP_APL03; + + /* check board id to arrange driver data */ + system_id = dmi_first_match(upboard_dmi_table); + if (system_id) + board_id = system_id->ident; + dev_info(&pdev->dev, "compatible upboard id %d", board_id); + switch (board_id) { + case BOARD_UP_APL01: + pctldesc = &upboard_up2_pinctrl_desc; + rpi_mapping = upboard_up2_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up2_rpi_mapping); + break; + case BOARD_UP_UPCORE: + pctldesc = &upboard_upcore_crex_pinctrl_desc; + rpi_mapping = upboard_upcore_crex_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping); + break; + case BOARD_UP_CORE_PLUS: + pctldesc = &upboard_upcore_crst02_pinctrl_desc; + rpi_mapping = upboard_upcore_crst02_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping); + break; + default: + pctldesc = &upboard_up_pinctrl_desc; + rpi_mapping = upboard_up_rpi_mapping; + ngpio = ARRAY_SIZE(upboard_up_rpi_mapping); + break; + } + + pctldesc->name = dev_name(&pdev->dev); + + pins = devm_kcalloc(&pdev->dev, pctldesc->npins, sizeof(*pins), GFP_KERNEL); + if (!pins) + return -ENOMEM; + + /* initialise pins */ + for (i = 0; i < pctldesc->npins; i++) { + struct upboard_pin *pin = &pins[i]; + struct pinctrl_pin_desc *pd = (struct pinctrl_pin_desc *) &pctldesc->pins[i]; + struct reg_field fldconf = {0}; + unsigned int regoff = (pd->number / UPFPGA_REGISTER_SIZE); + unsigned int lsb = pd->number % UPFPGA_REGISTER_SIZE; + + pin->funcbit = NULL; + + if (pd->drv_data) { + fldconf = *(struct reg_field *)pd->drv_data; + + pin->funcbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->funcbit)) + return PTR_ERR(pin->funcbit); + } + + fldconf.reg = UPFPGA_REG_GPIO_EN0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + pin->enbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->enbit)) + return PTR_ERR(pin->enbit); + + fldconf.reg = UPFPGA_REG_GPIO_DIR0 + regoff; + fldconf.lsb = lsb; + fldconf.msb = lsb; + + pin->dirbit = devm_regmap_field_alloc(&pdev->dev, + fpga->regmap, + fldconf); + if (IS_ERR(pin->dirbit)) + return PTR_ERR(pin->dirbit); + + pd->drv_data = pin; + } + + /* create a new pinctrl device and register it */ + pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL); + if (!pctrl) + return -ENOMEM; + + pctrl->rpi_mapping = rpi_mapping; + pctrl->chip = upboard_gpio_chip; + pctrl->pctldesc = pctldesc; + pctrl->chip.parent = &pdev->dev; + pctrl->chip.ngpio = ngpio; + pctrl->pins = pins; + pctrl->ident = board_id; + + ret = devm_gpiochip_add_data(&pdev->dev, &pctrl->chip, pctrl); + if (ret) + return ret; + + pctrl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, pctrl); + if (IS_ERR(pctrl->pctldev)) + return PTR_ERR(pctrl->pctldev); + + /* add acpi pin mapping according to external-gpios key */ + ret = upboard_acpi_node_pin_mapping(fpga, pctrl, + "external", + dev_name(&pdev->dev), + 0); + if (ret) + return ret; + + upboard_alt_func_enable(&pctrl->chip, "I2C", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "SPI", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "UART", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "I2S", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "PWM", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "ADC", pctrl->ident); + upboard_alt_func_enable(&pctrl->chip, "PINMUX", pctrl->ident); + + return ret; +} + +static struct platform_driver upboard_pinctrl_driver = { + .driver = { + .name = "upboard-pinctrl", + }, +}; +module_platform_driver_probe(upboard_pinctrl_driver, upboard_pinctrl_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board HAT pin controller driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:upboard-pinctrl"); From patchwork Fri Sep 15 03:11:23 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "larry.lai" X-Patchwork-Id: 723403 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3AD0DEE3F06 for ; Fri, 15 Sep 2023 03:12:17 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229767AbjIODMU (ORCPT ); Thu, 14 Sep 2023 23:12:20 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49260 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231838AbjIODMT (ORCPT ); Thu, 14 Sep 2023 23:12:19 -0400 Received: from APC01-SG2-obe.outbound.protection.outlook.com (mail-sgaapc01on2112.outbound.protection.outlook.com [40.107.215.112]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 45704270B; Thu, 14 Sep 2023 20:12:14 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; s=arcselector9901; d=microsoft.com; cv=none; b=YgyC6nQRoargVnnBdH6gyJG6Q5yxcLw65WOUMHPzxOBn8nioFwe84E3O3Jtosd6msNpfDICSJUKYRiZC7rppSnCPRWRveslP2xV1odwTtNatYLSRH7G25iSQaWxpT0uuq3VTlW4Pc5kGa/gBT0t9nPjQUJEbzMudtl6oq0zueq5tlKvcEw5O/zH0MZLy8mJ8C0ttDnzx1Tw+ft8mkZwU9Pky9bZhMPyOpVfAW2p6RCYTCpsGRG19t88Fb+p59GyFmI+Jt/sU7ZICIN56LnO6o04IlF2G4BrXu6yQY6w3jvEm6aCO9LDo7apvhJI47kwf6L6y6ICNpApk7YIZc8BYBQ== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=microsoft.com; s=arcselector9901; h=From:Date:Subject:Message-ID:Content-Type:MIME-Version:X-MS-Exchange-AntiSpam-MessageData-ChunkCount:X-MS-Exchange-AntiSpam-MessageData-0:X-MS-Exchange-AntiSpam-MessageData-1; bh=mPEFak8DPIKg17Qx9spL/cql1Cl8xlsX59FcpvNA4j8=; b=NXCY13f2SQGb0TBvRjHCU9Vn4OEgx4B7ui+wFUs/+HCiLuzQZ62tiKaVNGv7U6GfghcInRlcsKP+p/mwvhz9kNc+xYrF4U7zYLuvrIiFnuqF+Adv+iQ0BakdnPzUEnwUCRQNQ6Bpmi3Iztqj4FGciCN23bVxSrsJH7Jhzl8dc1+JLT9kcTABmSlZHtmGmWVsxVOqVUioUS9MuTzabTkSR2akxHMcPtpQTgyqrAMv8tDaUHXcRoQpux4LCcu27aqvVygFBymTj0Zjf0qF0VfbNIvpThuWjR8vWr/YqETe3L9FsglJbLmjFMXaFmlVpdr46/EppS9/ezV19lvFLxp0dA== ARC-Authentication-Results: i=1; mx.microsoft.com 1; spf=pass smtp.mailfrom=yunjingtech.com; dmarc=pass action=none header.from=yunjingtech.com; dkim=pass header.d=yunjingtech.com; arc=none Authentication-Results: dkim=none (message not signed) header.d=none;dmarc=none action=none header.from=yunjingtech.com; Received: from SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) by JH0PR06MB6654.apcprd06.prod.outlook.com (2603:1096:990:36::12) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.20.6792.21; Fri, 15 Sep 2023 03:12:11 +0000 Received: from SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0]) by SEYPR06MB6507.apcprd06.prod.outlook.com ([fe80::3fe6:a3fc:55d:fba0%4]) with mapi id 15.20.6792.021; Fri, 15 Sep 2023 03:12:11 +0000 From: "larry.lai" To: lee@kernel.org, andriy.shevchenko@linux.intel.com, linus.walleij@linaro.org, pavel@ucw.cz Cc: linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, linux-leds@vger.kernel.org, GaryWang@aaeon.com.tw, musa.lin@yunjingtech.com, jack.chang@yunjingtech.com, noah.hung@yunjingtech.com, "larry.lai" , Gary Wang Subject: [PATCH V6 3/3] leds: Add support for UP board CPLD onboard LEDS Date: Fri, 15 Sep 2023 11:11:23 +0800 Message-Id: <20230915031123.14515-4-larry.lai@yunjingtech.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230915031123.14515-1-larry.lai@yunjingtech.com> References: <20230915031123.14515-1-larry.lai@yunjingtech.com> X-ClientProxiedBy: TYCP286CA0099.JPNP286.PROD.OUTLOOK.COM (2603:1096:400:2b4::17) To SEYPR06MB6507.apcprd06.prod.outlook.com (2603:1096:101:177::9) MIME-Version: 1.0 X-MS-PublicTrafficType: Email X-MS-TrafficTypeDiagnostic: SEYPR06MB6507:EE_|JH0PR06MB6654:EE_ X-MS-Office365-Filtering-Correlation-Id: 84ea5b44-e3cd-46f7-6429-08dbb5998d92 X-MS-Exchange-SenderADCheck: 1 X-MS-Exchange-AntiSpam-Relay: 0 X-Microsoft-Antispam: BCL:0; X-Microsoft-Antispam-Message-Info: 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 X-Forefront-Antispam-Report: CIP:255.255.255.255; CTRY:; LANG:en; SCL:1; SRV:; IPV:NLI; SFV:NSPM; H:SEYPR06MB6507.apcprd06.prod.outlook.com; PTR:; CAT:NONE; SFS:(13230031)(366004)(136003)(396003)(39830400003)(346002)(376002)(451199024)(1800799009)(186009)(36756003)(38350700002)(38100700002)(86362001)(52116002)(6666004)(4326008)(6486002)(478600001)(2906002)(8936002)(8676002)(41300700001)(5660300002)(6512007)(6506007)(83380400001)(54906003)(316002)(66556008)(66946007)(66476007)(1076003)(2616005)(26005); DIR:OUT; SFP:1102; X-MS-Exchange-AntiSpam-MessageData-ChunkCount: 1 X-MS-Exchange-AntiSpam-MessageData-0: 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 X-OriginatorOrg: yunjingtech.com X-MS-Exchange-CrossTenant-Network-Message-Id: 84ea5b44-e3cd-46f7-6429-08dbb5998d92 X-MS-Exchange-CrossTenant-AuthSource: SEYPR06MB6507.apcprd06.prod.outlook.com X-MS-Exchange-CrossTenant-AuthAs: Internal X-MS-Exchange-CrossTenant-OriginalArrivalTime: 15 Sep 2023 03:12:11.4320 (UTC) X-MS-Exchange-CrossTenant-FromEntityHeader: Hosted X-MS-Exchange-CrossTenant-Id: be2d5505-f7e6-4600-bbe2-b3201c91b344 X-MS-Exchange-CrossTenant-MailboxType: HOSTED X-MS-Exchange-CrossTenant-UserPrincipalName: MYDYa3ueR9bora7gvMd6lWYz9CqHxWfIzAqImvb6PIEVIOgL89fjAXm6gpA/Csw+PHwvbesTYaiChU69HlT2ree5hjteO5AerP3s5EwIfj0= X-MS-Exchange-Transport-CrossTenantHeadersStamped: JH0PR06MB6654 Precedence: bulk List-ID: X-Mailing-List: linux-leds@vger.kernel.org The UP boards come with a few FPGA-controlled onboard LEDs: * UP Board: yellow, green, red * UP Squared: blue, yellow, green, red This patch depends on patch "mfd: Add support for UP board CPLD/FPGA". Signed-off-by: Gary Wang Signed-off-by: larry.lai --- PATCH V4 -> PATCH V6 : There is no change. RFC 2023/04/25 -> PATCH V4 (1) Fixed kernel test robot compiler warning. (2) Remove mistakes with wrong Reviewed-by tags. RFC 2022/11/23 --> RFC 2023/04/25: Refer 2022/12/08 Lee Jones review, cleaned up coding style. PATCH V3 -> RFC 2022/11/23: Update the changes Copyright. PATCH V1 -> V3: There is no change. PATCH --> PATCH V1: Refer 2022/10/03 Andy Shevchenko review, cleaned up coding style. --- drivers/leds/Kconfig | 10 +++++ drivers/leds/Makefile | 1 + drivers/leds/leds-upboard.c | 79 +++++++++++++++++++++++++++++++++++++ 3 files changed, 90 insertions(+) create mode 100644 drivers/leds/leds-upboard.c diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 499d0f215a8b..d9d533cb38ca 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -872,6 +872,16 @@ source "drivers/leds/flash/Kconfig" comment "RGB LED drivers" source "drivers/leds/rgb/Kconfig" +config LEDS_UPBOARD + tristate "LED support for the UP board" + depends on LEDS_CLASS + depends on MFD_INTEL_UPBOARD_FPGA + help + This option enables support for the UP board LEDs. + + To compile this driver as a module, choose M here: the module + will be called leds-upboard. + comment "LED Triggers" source "drivers/leds/trigger/Kconfig" diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index 4fd2f92cd198..e72956645646 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -83,6 +83,7 @@ obj-$(CONFIG_LEDS_TI_LMU_COMMON) += leds-ti-lmu-common.o obj-$(CONFIG_LEDS_TLC591XX) += leds-tlc591xx.o obj-$(CONFIG_LEDS_TPS6105X) += leds-tps6105x.o obj-$(CONFIG_LEDS_TURRIS_OMNIA) += leds-turris-omnia.o +obj-$(CONFIG_LEDS_UPBOARD) += leds-upboard.o obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o diff --git a/drivers/leds/leds-upboard.c b/drivers/leds/leds-upboard.c new file mode 100644 index 000000000000..8a44afe8c526 --- /dev/null +++ b/drivers/leds/leds-upboard.c @@ -0,0 +1,79 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * UP Board CPLD/FPGA based LED driver + * + * Copyright (c) AAEON. All rights reserved. + * + * Author: Gary Wang + */ + +#include +#include +#include +#include +#include +#include + +struct upboard_led { + struct regmap_field *field; + struct led_classdev cdev; + unsigned char bit; +}; + +static enum led_brightness upboard_led_brightness_get(struct led_classdev *cdev) +{ + struct upboard_led *led = container_of(cdev, struct upboard_led, cdev); + int brightness = 0; + + regmap_field_read(led->field, &brightness); + + return brightness; +}; + +static void upboard_led_brightness_set(struct led_classdev *cdev, enum led_brightness brightness) +{ + struct upboard_led *led = container_of(cdev, struct upboard_led, cdev); + + regmap_field_write(led->field, brightness != LED_OFF); +}; + +static int __init upboard_led_probe(struct platform_device *pdev) +{ + struct upboard_fpga * const up_fpga = dev_get_drvdata(pdev->dev.parent); + struct reg_field fldconf = { + .reg = UPFPGA_REG_FUNC_EN0, + }; + struct upboard_led_data * const pdata = pdev->dev.platform_data; + struct upboard_led *led; + + led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL); + if (!led) + return -ENOMEM; + + fldconf.lsb = pdata->bit; + fldconf.msb = pdata->bit; + led->field = devm_regmap_field_alloc(&pdev->dev, up_fpga->regmap, fldconf); + if (IS_ERR(led->field)) + return PTR_ERR(led->field); + + led->cdev.brightness_get = upboard_led_brightness_get; + led->cdev.brightness_set = upboard_led_brightness_set; + led->cdev.name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "upboard:%s:", + pdata->colour); + if (!led->cdev.name) + return -ENOMEM; + + return devm_led_classdev_register(&pdev->dev, &led->cdev); +}; + +static struct platform_driver upboard_led_driver = { + .driver = { + .name = "upboard-led", + }, +}; +module_platform_driver_probe(upboard_led_driver, upboard_led_probe); + +MODULE_AUTHOR("Gary Wang "); +MODULE_DESCRIPTION("UP Board LED driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:upboard-led");