From patchwork Thu Aug 3 06:37:02 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yinbo Zhu X-Patchwork-Id: 710134 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9CD61C04A6A for ; Thu, 3 Aug 2023 06:37:31 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233343AbjHCGha (ORCPT ); Thu, 3 Aug 2023 02:37:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46882 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233351AbjHCGh1 (ORCPT ); Thu, 3 Aug 2023 02:37:27 -0400 Received: from mail.loongson.cn (mail.loongson.cn [114.242.206.163]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id 67B0330E3; Wed, 2 Aug 2023 23:37:23 -0700 (PDT) Received: from loongson.cn (unknown [10.20.42.201]) by gateway (Coremail) with SMTP id _____8CxfOoiS8tkFoYPAA--.9019S3; Thu, 03 Aug 2023 14:37:22 +0800 (CST) Received: from localhost.localdomain (unknown [10.20.42.201]) by localhost.localdomain (Coremail) with SMTP id AQAAf8CxF80aS8tkMsZGAA--.49295S3; Thu, 03 Aug 2023 14:37:20 +0800 (CST) From: Yinbo Zhu To: Arnd Bergmann , Rob Herring , Krzysztof Kozlowski , Conor Dooley , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, soc@kernel.org, Ulf Hansson Cc: Jianmin Lv , wanghongliang@loongson.cn, Liu Peibao , loongson-kernel@lists.loongnix.cn, Yinbo Zhu , loongarch@lists.linux.dev, Liu Yun , Krzysztof Kozlowski Subject: [PATCH v6 1/2] soc: dt-bindings: add loongson-2 pm Date: Thu, 3 Aug 2023 14:37:02 +0800 Message-Id: <20230803063703.5659-2-zhuyinbo@loongson.cn> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20230803063703.5659-1-zhuyinbo@loongson.cn> References: <20230803063703.5659-1-zhuyinbo@loongson.cn> MIME-Version: 1.0 X-CM-TRANSID: AQAAf8CxF80aS8tkMsZGAA--.49295S3 X-CM-SenderInfo: 52kx5xhqerqz5rrqw2lrqou0/ X-Coremail-Antispam: 1Uk129KBjDUn29KB7ZKAUJUUUUU529EdanIXcx71UUUUU7KY7 ZEXasCq-sGcSsGvfJ3UbIjqfuFe4nvWSU5nxnvy29KBjDU0xBIdaVrnUUvcSsGvfC2Kfnx nUUI43ZEXa7xR_UUUUUUUUU== Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add the Loongson-2 SoC Power Management Controller binding with DT schema format using json-schema. Signed-off-by: Yinbo Zhu Reviewed-by: Krzysztof Kozlowski --- .../soc/loongson/loongson,ls2k-pmc.yaml | 52 +++++++++++++++++++ MAINTAINERS | 6 +++ 2 files changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml diff --git a/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml new file mode 100644 index 000000000000..da2dcfeebf12 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/loongson/loongson,ls2k-pmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Loongson-2 Power Manager controller + +maintainers: + - Yinbo Zhu + +properties: + compatible: + items: + - enum: + - loongson,ls2k0500-pmc + - loongson,ls2k1000-pmc + - const: syscon + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + loongson,suspend-address: + $ref: /schemas/types.yaml#/definitions/uint64 + description: + The "loongson,suspend-address" is a deep sleep state (Suspend To + RAM) firmware entry address which was jumped from kernel and it's + value was dependent on specific platform firmware code. In + addition, the PM need according to it to indicate that current + SoC whether support Suspend To RAM. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include + + power-management@1fe27000 { + compatible = "loongson,ls2k1000-pmc", "syscon"; + reg = <0x1fe27000 0x58>; + interrupt-parent = <&liointc1>; + interrupts = <11 IRQ_TYPE_LEVEL_LOW>; + loongson,suspend-address = <0x0 0x1c000500>; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 1089ef3319f2..608a00473498 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12365,6 +12365,12 @@ S: Maintained F: Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml F: drivers/soc/loongson/loongson2_guts.c +LOONGSON-2 SOC SERIES PM DRIVER +M: Yinbo Zhu +L: linux-pm@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml + LOONGSON-2 SOC SERIES PINCTRL DRIVER M: zhanghongchen M: Yinbo Zhu From patchwork Thu Aug 3 06:37:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yinbo Zhu X-Patchwork-Id: 710133 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9CA15C04E69 for ; Thu, 3 Aug 2023 06:37:33 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233350AbjHCGhc (ORCPT ); Thu, 3 Aug 2023 02:37:32 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46756 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233378AbjHCGha (ORCPT ); Thu, 3 Aug 2023 02:37:30 -0400 Received: from mail.loongson.cn (mail.loongson.cn [114.242.206.163]) by lindbergh.monkeyblade.net (Postfix) with ESMTP id F3ED830E4; Wed, 2 Aug 2023 23:37:24 -0700 (PDT) Received: from loongson.cn (unknown [10.20.42.201]) by gateway (Coremail) with SMTP id _____8AxlPAiS8tkHIYPAA--.36175S3; Thu, 03 Aug 2023 14:37:22 +0800 (CST) Received: from localhost.localdomain (unknown [10.20.42.201]) by localhost.localdomain (Coremail) with SMTP id AQAAf8CxF80aS8tkMsZGAA--.49295S4; Thu, 03 Aug 2023 14:37:21 +0800 (CST) From: Yinbo Zhu To: Arnd Bergmann , Rob Herring , Krzysztof Kozlowski , Conor Dooley , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, soc@kernel.org, Ulf Hansson Cc: Jianmin Lv , wanghongliang@loongson.cn, Liu Peibao , loongson-kernel@lists.loongnix.cn, Yinbo Zhu , loongarch@lists.linux.dev, Liu Yun Subject: [PATCH v6 2/2] soc: loongson2_pm: add power management support Date: Thu, 3 Aug 2023 14:37:03 +0800 Message-Id: <20230803063703.5659-3-zhuyinbo@loongson.cn> X-Mailer: git-send-email 2.20.1 In-Reply-To: <20230803063703.5659-1-zhuyinbo@loongson.cn> References: <20230803063703.5659-1-zhuyinbo@loongson.cn> MIME-Version: 1.0 X-CM-TRANSID: AQAAf8CxF80aS8tkMsZGAA--.49295S4 X-CM-SenderInfo: 52kx5xhqerqz5rrqw2lrqou0/ X-Coremail-Antispam: 1Uk129KBjDUn29KB7ZKAUJUUUUU529EdanIXcx71UUUUU7KY7 ZEXasCq-sGcSsGvfJ3UbIjqfuFe4nvWSU5nxnvy29KBjDU0xBIdaVrnUUvcSsGvfC2Kfnx nUUI43ZEXa7xR_UUUUUUUUU== Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org The Loongson-2's power management controller was ACPI, supports ACPI S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods (USB, GMAC, PWRBTN, etc.). This driver was to add power management controller support that base on dts for Loongson-2 series SoCs. Co-developed-by: Liu Yun Signed-off-by: Liu Yun Co-developed-by: Liu Peibao Signed-off-by: Liu Peibao Cc: soc@kernel.org Cc: Ulf Hansson Signed-off-by: Yinbo Zhu --- MAINTAINERS | 1 + drivers/soc/loongson/Kconfig | 10 ++ drivers/soc/loongson/Makefile | 1 + drivers/soc/loongson/loongson2_pm.c | 215 ++++++++++++++++++++++++++++ 4 files changed, 227 insertions(+) create mode 100644 drivers/soc/loongson/loongson2_pm.c diff --git a/MAINTAINERS b/MAINTAINERS index 608a00473498..35e0757785f1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12370,6 +12370,7 @@ M: Yinbo Zhu L: linux-pm@vger.kernel.org S: Maintained F: Documentation/devicetree/bindings/soc/loongson/loongson,ls2k-pmc.yaml +F: drivers/soc/loongson/loongson2_pm.c LOONGSON-2 SOC SERIES PINCTRL DRIVER M: zhanghongchen diff --git a/drivers/soc/loongson/Kconfig b/drivers/soc/loongson/Kconfig index 707f56358dc4..314e13bb3e01 100644 --- a/drivers/soc/loongson/Kconfig +++ b/drivers/soc/loongson/Kconfig @@ -16,3 +16,13 @@ config LOONGSON2_GUTS SoCs. Initially only reading SVR and registering soc device are supported. Other guts accesses, such as reading firmware configuration by default, should eventually be added into this driver as well. + +config LOONGSON2_PM + bool "Loongson-2 SoC Power Management Controller Driver" + depends on LOONGARCH && OF + help + The Loongson-2's power management controller was ACPI, supports ACPI + S2Idle (Suspend To Idle), ACPI S3 (Suspend To RAM), ACPI S4 (Suspend To + Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods + (USB, GMAC, PWRBTN, etc.). This driver was to add power management + controller support that base on dts for Loongson-2 series SoCs. diff --git a/drivers/soc/loongson/Makefile b/drivers/soc/loongson/Makefile index 263c486df638..4118f50f55e2 100644 --- a/drivers/soc/loongson/Makefile +++ b/drivers/soc/loongson/Makefile @@ -4,3 +4,4 @@ # obj-$(CONFIG_LOONGSON2_GUTS) += loongson2_guts.o +obj-$(CONFIG_LOONGSON2_PM) += loongson2_pm.o diff --git a/drivers/soc/loongson/loongson2_pm.c b/drivers/soc/loongson/loongson2_pm.c new file mode 100644 index 000000000000..796add6e8b63 --- /dev/null +++ b/drivers/soc/loongson/loongson2_pm.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Loongson-2 PM Support + * + * Copyright (C) 2023 Loongson Technology Corporation Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define LOONGSON2_PM1_CNT_REG 0x14 +#define LOONGSON2_PM1_STS_REG 0x0c +#define LOONGSON2_PM1_ENA_REG 0x10 +#define LOONGSON2_GPE0_STS_REG 0x28 +#define LOONGSON2_GPE0_ENA_REG 0x2c + +#define LOONGSON2_PM1_PWRBTN_STS BIT(8) +#define LOONGSON2_PM1_PCIEXP_WAKE_STS BIT(14) +#define LOONGSON2_PM1_WAKE_STS BIT(15) +#define LOONGSON2_PM1_CNT_INT_EN BIT(0) +#define LOONGSON2_PM1_PWRBTN_EN LOONGSON2_PM1_PWRBTN_STS + +static struct loongson2_pm { + void __iomem *base; + struct input_dev *dev; + bool suspended; +} loongson2_pm; + +#define loongson2_pm_readw(reg) readw(loongson2_pm.base + reg) +#define loongson2_pm_readl(reg) readl(loongson2_pm.base + reg) +#define loongson2_pm_writew(val, reg) writew(val, loongson2_pm.base + reg) +#define loongson2_pm_writel(val, reg) writel(val, loongson2_pm.base + reg) + +static void loongson2_pm_status_clear(void) +{ + u16 value; + + value = loongson2_pm_readw(LOONGSON2_PM1_STS_REG); + value |= (LOONGSON2_PM1_PWRBTN_STS | LOONGSON2_PM1_PCIEXP_WAKE_STS | + LOONGSON2_PM1_WAKE_STS); + loongson2_pm_writew(value, LOONGSON2_PM1_STS_REG); + loongson2_pm_writel(loongson2_pm_readl(LOONGSON2_GPE0_STS_REG), LOONGSON2_GPE0_STS_REG); +} + +static void loongson2_pm_irq_enable(void) +{ + u16 value; + + value = loongson2_pm_readw(LOONGSON2_PM1_CNT_REG); + value |= LOONGSON2_PM1_CNT_INT_EN; + loongson2_pm_writew(value, LOONGSON2_PM1_CNT_REG); + + value = loongson2_pm_readw(LOONGSON2_PM1_ENA_REG); + value |= LOONGSON2_PM1_PWRBTN_EN; + loongson2_pm_writew(value, LOONGSON2_PM1_ENA_REG); +} + +static int loongson2_suspend_enter(suspend_state_t state) +{ + loongson2_pm_status_clear(); + loongarch_common_suspend(); + loongarch_suspend_enter(); + loongarch_common_resume(); + loongson2_pm_irq_enable(); + pm_set_resume_via_firmware(); + + return 0; +} + +static int loongson2_suspend_begin(suspend_state_t state) +{ + pm_set_suspend_via_firmware(); + + return 0; +} + +static int loongson2_suspend_valid_state(suspend_state_t state) +{ + return (state == PM_SUSPEND_MEM); +} + +static const struct platform_suspend_ops loongson2_suspend_ops = { + .valid = loongson2_suspend_valid_state, + .begin = loongson2_suspend_begin, + .enter = loongson2_suspend_enter, +}; + +static int loongson2_power_button_init(struct device *dev, int irq) +{ + int ret; + struct input_dev *button; + + button = input_allocate_device(); + if (!dev) + return -ENOMEM; + + button->name = "Power Button"; + button->phys = "pm/button/input0"; + button->id.bustype = BUS_HOST; + button->dev.parent = NULL; + input_set_capability(button, EV_KEY, KEY_POWER); + + ret = input_register_device(button); + if (ret) + goto free_dev; + + dev_pm_set_wake_irq(&button->dev, irq); + device_set_wakeup_capable(&button->dev, true); + device_set_wakeup_enable(&button->dev, true); + + loongson2_pm.dev = button; + dev_info(dev, "Power Button: Init successful!\n"); + + return 0; + +free_dev: + input_free_device(button); + + return ret; +} + +static irqreturn_t loongson2_pm_irq_handler(int irq, void *dev_id) +{ + u16 status = loongson2_pm_readw(LOONGSON2_PM1_STS_REG); + + if (!loongson2_pm.suspended && (status & LOONGSON2_PM1_PWRBTN_STS)) { + pr_info("Power Button pressed...\n"); + input_report_key(loongson2_pm.dev, KEY_POWER, 1); + input_sync(loongson2_pm.dev); + input_report_key(loongson2_pm.dev, KEY_POWER, 0); + input_sync(loongson2_pm.dev); + } + + loongson2_pm_status_clear(); + + return IRQ_HANDLED; +} + +static int __maybe_unused loongson2_pm_suspend(struct device *dev) +{ + loongson2_pm.suspended = true; + + return 0; +} + +static int __maybe_unused loongson2_pm_resume(struct device *dev) +{ + loongson2_pm.suspended = false; + + return 0; +} +static SIMPLE_DEV_PM_OPS(loongson2_pm_ops, loongson2_pm_suspend, loongson2_pm_resume); + +static int loongson2_pm_probe(struct platform_device *pdev) +{ + int irq, retval; + u64 suspend_addr; + struct device *dev = &pdev->dev; + + loongson2_pm.base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(loongson2_pm.base)) + return PTR_ERR(loongson2_pm.base); + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + if (!device_property_read_u64(dev, "loongson,suspend-address", &suspend_addr)) + loongson_sysconf.suspend_addr = (u64)phys_to_virt(suspend_addr); + else + dev_err(dev, "No loongson,suspend-address, could not support S3!\n"); + + if (loongson2_power_button_init(dev, irq)) + return -EINVAL; + + retval = devm_request_irq(&pdev->dev, irq, loongson2_pm_irq_handler, + IRQF_SHARED, "pm_irq", &loongson2_pm); + if (retval) + return retval; + + loongson2_pm_irq_enable(); + loongson2_pm_status_clear(); + + if (loongson_sysconf.suspend_addr) + suspend_set_ops(&loongson2_suspend_ops); + + return 0; +} + +static const struct of_device_id loongson2_pm_match[] = { + { .compatible = "loongson,ls2k0500-pmc", }, + { .compatible = "loongson,ls2k1000-pmc", }, + {}, +}; + +static struct platform_driver loongson2_pm_driver = { + .driver = { + .name = "ls2k-pm", + .pm = &loongson2_pm_ops, + .of_match_table = loongson2_pm_match, + }, + .probe = loongson2_pm_probe, +}; +module_platform_driver(loongson2_pm_driver); + +MODULE_DESCRIPTION("Loongson-2 PM driver"); +MODULE_LICENSE("GPL");