From patchwork Thu Jul 27 22:32:59 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 707168 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id BF01AC05051 for ; Thu, 27 Jul 2023 22:34:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233062AbjG0Wef (ORCPT ); Thu, 27 Jul 2023 18:34:35 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49028 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233029AbjG0Wed (ORCPT ); Thu, 27 Jul 2023 18:34:33 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ADD6A30F4; Thu, 27 Jul 2023 15:34:06 -0700 (PDT) Received: from pps.filterd (m0279873.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 36RMUUC8007491; Thu, 27 Jul 2023 22:33:42 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=AYcny/53hY52cWTE7ag90lTf0NNuwpwG2MUncJh7ew8=; b=in8s+YeTIDVxcol3wGr48wk4jwhW76vpuNC5kvhuS9A00ssXe5ZA2CoL0PUoyoc/bI+E QLi8wfl9qSyMuDi3A97TMz++4uzYYJBXh3X9MeoGNEk3lJ2DphMDH4VBxo1+o1T6KKNg PBqUsExiyzru0uDkcB3FKnFAeEsiSWxLCC02yFF2jQd0b2nijwmrVihzIHEGzpimxGX8 2sbDDrxpBXjo2IFxC8AMZrjnGMYNr8rpsE1exOWx5eywsLNIlMh0X5xIrafd+V3KW06D 6KCghfnUlWeTPdq/OIaguR5O1eFNQ6xZSItvSWEqHF8lUxBMIXTOGpiB7oj9iS/z+hpv Zw== Received: from nalasppmta02.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3s3mpt20ht-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:33:42 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA02.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 36RMXf8D010731 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:33:41 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Thu, 27 Jul 2023 15:33:35 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold , Mathias Nyman CC: , , , , , , , , , Krishna Kurapati Subject: [PATCH v10 03/11] usb: dwc3: core: Access XHCI address space temporarily to read port info Date: Fri, 28 Jul 2023 04:02:59 +0530 Message-ID: <20230727223307.8096-4-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230727223307.8096-1-quic_kriskura@quicinc.com> References: <20230727223307.8096-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: M1hyEZhHN7TeBi-cUTvKdW0U28v_z-Xf X-Proofpoint-GUID: M1hyEZhHN7TeBi-cUTvKdW0U28v_z-Xf X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-07-27_10,2023-07-26_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 adultscore=0 spamscore=0 mlxscore=0 phishscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 clxscore=1015 mlxlogscore=999 malwarescore=0 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2306200000 definitions=main-2307270205 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Currently host-only capable DWC3 controllers support Multiport. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Each USB Port is at least HS capable. Since the extcaps header is only being used, move port_count related macros and structure from xhci.h to xhci-ext-caps.h. The port info for usb2 and usb3 phy are identified as num_usb2_ports and num_usb3_ports. The intention is as follows: Wherever we need to perform phy operations like: LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS() { phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); } If number of usb2 ports is 3, loop can go from index 0-2 for usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure, if the first 2 ports are SS capable or some other ports like (2 and 3) are SS capable. So instead, num_usb2_ports is used to loop around all phy's (both hs and ss) for performing phy operations. If any usb3_generic_phy turns out to be NULL, phy operation just bails out. num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up phy's as we need to know how many SS capable ports are there for this. Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/core.c | 61 ++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 5 +++ drivers/usb/host/xhci-ext-caps.h | 27 ++++++++++++++ drivers/usb/host/xhci.h | 27 -------------- 4 files changed, 93 insertions(+), 27 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index f6689b731718..edc79ce70588 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -39,6 +39,7 @@ #include "io.h" #include "debug.h" +#include "../host/xhci-ext-caps.h" #define DWC3_DEFAULT_AUTOSUSPEND_DELAY 5000 /* ms */ @@ -1767,6 +1768,51 @@ static int dwc3_get_clocks(struct dwc3 *dwc) return 0; } +static int dwc3_read_port_info(struct dwc3 *dwc) +{ + void __iomem *base; + u8 major_revision; + u32 offset = 0; + u32 val; + + /* + * Remap xHCI address space to access XHCI ext cap regs, + * since it is needed to get port info. + */ + base = ioremap(dwc->xhci_resources[0].start, + resource_size(&dwc->xhci_resources[0])); + if (IS_ERR(base)) + return PTR_ERR(base); + + do { + offset = xhci_find_next_ext_cap(base, offset, + XHCI_EXT_CAPS_PROTOCOL); + if (!offset) + break; + + val = readl(base + offset); + major_revision = XHCI_EXT_PORT_MAJOR(val); + + val = readl(base + offset + 0x08); + if (major_revision == 0x03) { + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(val); + } else if (major_revision <= 0x02) { + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(val); + } else { + dev_err(dwc->dev, + "Unrecognized port major revision %d\n", + major_revision); + } + } while (1); + + dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", + dwc->num_usb2_ports, dwc->num_usb3_ports); + + iounmap(base); + + return 0; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1774,6 +1820,7 @@ static int dwc3_probe(struct platform_device *pdev) void __iomem *regs; struct dwc3 *dwc; int ret; + unsigned int hw_mode; dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); if (!dwc) @@ -1854,6 +1901,20 @@ static int dwc3_probe(struct platform_device *pdev) goto err_disable_clks; } + /* + * Currently only DWC3 controllers that are host-only capable + * support Multiport. + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_read_port_info(dwc); + if (ret) + goto err_disable_clks; + } else { + dwc->num_usb2_ports = 1; + dwc->num_usb3_ports = 1; + } + spin_lock_init(&dwc->lock); mutex_init(&dwc->mutex); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 8b1295e4dcdd..0840808e8a40 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1029,6 +1029,8 @@ struct dwc3_scratchpad_array { * @usb3_phy: pointer to USB3 PHY * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY + * @num_usb2_ports: number of USB2 ports + * @num_usb3_ports: number of USB3 ports * @phys_ready: flag to indicate that PHYs are ready * @ulpi: pointer to ulpi interface * @ulpi_ready: flag to indicate that ULPI is initialized @@ -1168,6 +1170,9 @@ struct dwc3 { struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; + u8 num_usb2_ports; + u8 num_usb3_ports; + bool phys_ready; struct ulpi *ulpi; diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h index e8af0a125f84..96eb36a58738 100644 --- a/drivers/usb/host/xhci-ext-caps.h +++ b/drivers/usb/host/xhci-ext-caps.h @@ -79,6 +79,33 @@ /* true: Controller Not Ready to accept doorbell or op reg writes after reset */ #define XHCI_STS_CNR (1 << 11) +/** + * struct xhci_protocol_caps + * @revision: major revision, minor revision, capability ID, + * and next capability pointer. + * @name_string: Four ASCII characters to say which spec this xHC + * follows, typically "USB ". + * @port_info: Port offset, count, and protocol-defined information. + */ +struct xhci_protocol_caps { + u32 revision; + u32 name_string; + u32 port_info; +}; + +#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) +#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f) +#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) +#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) + +#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f) +#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03) +#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03) +#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01) +#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03) +#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff) + #include /** diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 7e282b4522c0..77016338bee1 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -558,33 +558,6 @@ struct xhci_doorbell_array { #define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16)) #define DB_VALUE_HOST 0x00000000 -/** - * struct xhci_protocol_caps - * @revision: major revision, minor revision, capability ID, - * and next capability pointer. - * @name_string: Four ASCII characters to say which spec this xHC - * follows, typically "USB ". - * @port_info: Port offset, count, and protocol-defined information. - */ -struct xhci_protocol_caps { - u32 revision; - u32 name_string; - u32 port_info; -}; - -#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) -#define XHCI_EXT_PORT_MINOR(x) (((x) >> 16) & 0xff) -#define XHCI_EXT_PORT_PSIC(x) (((x) >> 28) & 0x0f) -#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff) -#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) - -#define XHCI_EXT_PORT_PSIV(x) (((x) >> 0) & 0x0f) -#define XHCI_EXT_PORT_PSIE(x) (((x) >> 4) & 0x03) -#define XHCI_EXT_PORT_PLT(x) (((x) >> 6) & 0x03) -#define XHCI_EXT_PORT_PFD(x) (((x) >> 8) & 0x01) -#define XHCI_EXT_PORT_LP(x) (((x) >> 14) & 0x03) -#define XHCI_EXT_PORT_PSIM(x) (((x) >> 16) & 0xffff) - #define PLT_MASK (0x03 << 6) #define PLT_SYM (0x00 << 6) #define PLT_ASYM_RX (0x02 << 6) From patchwork Thu Jul 27 22:33:01 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 707167 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8006FC04A94 for ; Thu, 27 Jul 2023 22:34:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233113AbjG0Wev (ORCPT ); Thu, 27 Jul 2023 18:34:51 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49066 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233114AbjG0Weq (ORCPT ); Thu, 27 Jul 2023 18:34:46 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D30E13584; Thu, 27 Jul 2023 15:34:10 -0700 (PDT) Received: from pps.filterd (m0279871.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 36RLdwYv007511; Thu, 27 Jul 2023 22:33:57 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=7TxhICXjshMDS9X5sOPUb/8tXxe1RfRR83kZLaJfk7A=; b=i0TeM8+wTPGNWohuLDsxHLsS9SEJhf6n2RnmC7Ou6eMA7Am9EQQN6ECQO8O7k0B9883s vRTCoPjeDfXo/3PapdLo0RZZza6RA/SaEVNImJ8/Bm1dpqZmORayOVZv5bGHD3QKk53N g/P0gSKEhmi1rY/+F6hhCu9kfLGwbyiFe2Gf1Nl/7B5zVlSWDRU3ke1r65XSdAgV4z5f 1VFEPMspFPqGXrW8SCs7YJ0B10MAncdSFXk8qdzhibMNbP4Rpw6ao6809DQNztfrqv/O l7k/4xedMDCbmK+6+pLs1/iL0himKZbbQY7wm+Mm3RVL+B1JtMRuBe22h6ATc0VmL4Ba 0w== Received: from nalasppmta01.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3s37g0kc22-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:33:56 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA01.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 36RMXrPF007097 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:33:54 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Thu, 27 Jul 2023 15:33:47 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold , Mathias Nyman CC: , , , , , , , , , Harsh Agarwal , Krishna Kurapati Subject: [PATCH v10 05/11] usb: dwc3: core: Refactor PHY logic to support Multiport Controller Date: Fri, 28 Jul 2023 04:03:01 +0530 Message-ID: <20230727223307.8096-6-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230727223307.8096-1-quic_kriskura@quicinc.com> References: <20230727223307.8096-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 04Nz2T0EZkKeCsfGu2zTNer0WApWo5EM X-Proofpoint-ORIG-GUID: 04Nz2T0EZkKeCsfGu2zTNer0WApWo5EM X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-07-27_10,2023-07-26_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 malwarescore=0 suspectscore=0 spamscore=0 impostorscore=0 mlxlogscore=953 phishscore=0 lowpriorityscore=0 adultscore=0 priorityscore=1501 clxscore=1015 mlxscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2306200000 definitions=main-2307270205 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org From: Harsh Agarwal Currently the DWC3 driver supports only single port controller which requires at most one HS and one SS PHY. But the DWC3 USB controller can be connected to multiple ports and each port can have their own PHYs. Each port of the multiport controller can either be HS+SS capable or HS only capable Proper quantification of them is required to modify GUSB2PHYCFG and GUSB3PIPECTL registers appropriately. Add support for detecting, obtaining and configuring phy's supported by a multiport controller and. Limit the max number of ports supported to 4 as only SC8280 which is a quad port controller supports Multiport currently. Co-developed-by: Harsh Agarwal Signed-off-by: Harsh Agarwal Co-developed-by:Krishna Kurapati Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/core.c | 252 +++++++++++++++++++++++++++------------- drivers/usb/dwc3/core.h | 11 +- drivers/usb/dwc3/drd.c | 15 ++- 3 files changed, 190 insertions(+), 88 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0aa58600a566..c887c325d3c0 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -124,6 +124,7 @@ static void __dwc3_set_mode(struct work_struct *work) int ret; u32 reg; u32 desired_dr_role; + int i; mutex_lock(&dwc->mutex); spin_lock_irqsave(&dwc->lock, flags); @@ -201,8 +202,10 @@ static void __dwc3_set_mode(struct work_struct *work) } else { if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); + } if (dwc->dis_split_quirk) { reg = dwc3_readl(dwc->regs, DWC3_GUCTL3); reg |= DWC3_GUCTL3_SPLITDISABLE; @@ -217,8 +220,8 @@ static void __dwc3_set_mode(struct work_struct *work) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) @@ -589,22 +592,14 @@ static int dwc3_core_ulpi_init(struct dwc3 *dwc) return ret; } -/** - * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core - * @dwc: Pointer to our controller context structure - * - * Returns 0 on success. The USB PHY interfaces are configured but not - * initialized. The PHY interfaces and the PHYs get initialized together with - * the core in dwc3_core_init. - */ -static int dwc3_phy_setup(struct dwc3 *dwc) +static int dwc3_ss_phy_setup(struct dwc3 *dwc, int index) { unsigned int hw_mode; u32 reg; hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(index)); /* * Make sure UX_EXIT_PX is cleared as that causes issues with some @@ -659,9 +654,19 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_del_phy_power_chg_quirk) reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(index), reg); - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); + return 0; +} + +static int dwc3_hs_phy_setup(struct dwc3 *dwc, int index) +{ + unsigned int hw_mode; + u32 reg; + + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(index)); /* Select the HS PHY interface */ switch (DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3)) { @@ -673,7 +678,7 @@ static int dwc3_phy_setup(struct dwc3 *dwc) } else if (dwc->hsphy_interface && !strncmp(dwc->hsphy_interface, "ulpi", 4)) { reg |= DWC3_GUSB2PHYCFG_ULPI_UTMI; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); } else { /* Relying on default value. */ if (!(reg & DWC3_GUSB2PHYCFG_ULPI_UTMI)) @@ -740,7 +745,35 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->ulpi_ext_vbus_drv) reg |= DWC3_GUSB2PHYCFG_ULPIEXTVBUSDRV; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(index), reg); + + return 0; +} + +/** + * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core + * @dwc: Pointer to our controller context structure + * + * Returns 0 on success. The USB PHY interfaces are configured but not + * initialized. The PHY interfaces and the PHYs get initialized together with + * the core in dwc3_core_init. + */ +static int dwc3_phy_setup(struct dwc3 *dwc) +{ + int i; + int ret; + + for (i = 0; i < dwc->num_usb3_ports; i++) { + ret = dwc3_ss_phy_setup(dwc, i); + if (ret) + return ret; + } + + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = dwc3_hs_phy_setup(dwc, i); + if (ret) + return ret; + } return 0; } @@ -748,23 +781,32 @@ static int dwc3_phy_setup(struct dwc3 *dwc) static int dwc3_phy_init(struct dwc3 *dwc) { int ret; + int i; + int j; usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); - ret = phy_init(dwc->usb2_generic_phy); - if (ret < 0) - goto err_shutdown_usb3_phy; + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_init(dwc->usb2_generic_phy[i]); + if (ret < 0) + goto err_exit_phy; - ret = phy_init(dwc->usb3_generic_phy); - if (ret < 0) - goto err_exit_usb2_phy; + ret = phy_init(dwc->usb3_generic_phy[i]); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy[i]); + goto err_exit_phy; + } + } return 0; -err_exit_usb2_phy: - phy_exit(dwc->usb2_generic_phy); -err_shutdown_usb3_phy: +err_exit_phy: + for (j = i - 1; j >= 0; j--) { + phy_exit(dwc->usb2_generic_phy[j]); + phy_exit(dwc->usb3_generic_phy[j]); + } + usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); @@ -773,8 +815,12 @@ static int dwc3_phy_init(struct dwc3 *dwc) static void dwc3_phy_exit(struct dwc3 *dwc) { - phy_exit(dwc->usb3_generic_phy); - phy_exit(dwc->usb2_generic_phy); + int i; + + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_exit(dwc->usb3_generic_phy[i]); + phy_exit(dwc->usb2_generic_phy[i]); + } usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); @@ -783,23 +829,32 @@ static void dwc3_phy_exit(struct dwc3 *dwc) static int dwc3_phy_power_on(struct dwc3 *dwc) { int ret; + int i; + int j; usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); - ret = phy_power_on(dwc->usb2_generic_phy); - if (ret < 0) - goto err_suspend_usb3_phy; + for (i = 0; i < dwc->num_usb2_ports; i++) { + ret = phy_power_on(dwc->usb2_generic_phy[i]); + if (ret < 0) + goto err_power_off_phy; - ret = phy_power_on(dwc->usb3_generic_phy); - if (ret < 0) - goto err_power_off_usb2_phy; + ret = phy_power_on(dwc->usb3_generic_phy[i]); + if (ret < 0) { + phy_power_off(dwc->usb2_generic_phy[i]); + goto err_power_off_phy; + } + } return 0; -err_power_off_usb2_phy: - phy_power_off(dwc->usb2_generic_phy); -err_suspend_usb3_phy: +err_power_off_phy: + for (j = i - 1; j >= 0; j--) { + phy_power_off(dwc->usb2_generic_phy[j]); + phy_power_off(dwc->usb3_generic_phy[j]); + } + usb_phy_set_suspend(dwc->usb3_phy, 1); usb_phy_set_suspend(dwc->usb2_phy, 1); @@ -808,8 +863,12 @@ static int dwc3_phy_power_on(struct dwc3 *dwc) static void dwc3_phy_power_off(struct dwc3 *dwc) { - phy_power_off(dwc->usb3_generic_phy); - phy_power_off(dwc->usb2_generic_phy); + int i; + + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_power_off(dwc->usb3_generic_phy[i]); + phy_power_off(dwc->usb2_generic_phy[i]); + } usb_phy_set_suspend(dwc->usb3_phy, 1); usb_phy_set_suspend(dwc->usb2_phy, 1); @@ -1082,6 +1141,7 @@ static int dwc3_core_init(struct dwc3 *dwc) unsigned int hw_mode; u32 reg; int ret; + int i; hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); @@ -1125,15 +1185,19 @@ static int dwc3_core_init(struct dwc3 *dwc) if (hw_mode == DWC3_GHWPARAMS0_MODE_DRD && !DWC3_VER_IS_WITHIN(DWC3, ANY, 194A)) { if (!dwc->dis_u3_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - reg |= DWC3_GUSB3PIPECTL_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); + for (i = 0; i < dwc->num_usb3_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(i)); + reg |= DWC3_GUSB3PIPECTL_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(i), reg); + } } if (!dwc->dis_u2_susphy_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + reg |= DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } } } @@ -1292,7 +1356,9 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) { struct device *dev = dwc->dev; struct device_node *node = dev->of_node; + char phy_name[11]; int ret; + int i; if (node) { dwc->usb2_phy = devm_usb_get_phy_by_phandle(dev, "usb-phy", 0); @@ -1318,22 +1384,36 @@ static int dwc3_core_get_phy(struct dwc3 *dwc) return dev_err_probe(dev, ret, "no usb3 phy configured\n"); } - dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); - if (IS_ERR(dwc->usb2_generic_phy)) { - ret = PTR_ERR(dwc->usb2_generic_phy); - if (ret == -ENOSYS || ret == -ENODEV) - dwc->usb2_generic_phy = NULL; + for (i = 0; i < dwc->num_usb2_ports; i++) { + if (dwc->num_usb2_ports == 1) + sprintf(phy_name, "usb2-phy"); else - return dev_err_probe(dev, ret, "no usb2 phy configured\n"); - } + sprintf(phy_name, "usb2-port%d", i); - dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); - if (IS_ERR(dwc->usb3_generic_phy)) { - ret = PTR_ERR(dwc->usb3_generic_phy); - if (ret == -ENOSYS || ret == -ENODEV) - dwc->usb3_generic_phy = NULL; + dwc->usb2_generic_phy[i] = devm_phy_get(dev, phy_name); + if (IS_ERR(dwc->usb2_generic_phy[i])) { + ret = PTR_ERR(dwc->usb2_generic_phy[i]); + if (ret == -ENOSYS || ret == -ENODEV) + dwc->usb2_generic_phy[i] = NULL; + else + return dev_err_probe(dev, ret, + "failed to lookup phy %s\n", phy_name); + } + + if (dwc->num_usb2_ports == 1) + sprintf(phy_name, "usb3-phy"); else - return dev_err_probe(dev, ret, "no usb3 phy configured\n"); + sprintf(phy_name, "usb3-port%d", i); + + dwc->usb3_generic_phy[i] = devm_phy_get(dev, phy_name); + if (IS_ERR(dwc->usb3_generic_phy[i])) { + ret = PTR_ERR(dwc->usb3_generic_phy[i]); + if (ret == -ENOSYS || ret == -ENODEV) + dwc->usb3_generic_phy[i] = NULL; + else + return dev_err_probe(dev, ret, + "failed to lookup phy %s\n", phy_name); + } } return 0; @@ -1343,6 +1423,7 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) { struct device *dev = dwc->dev; int ret; + int i; switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: @@ -1350,8 +1431,8 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_DEVICE); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); + phy_set_mode(dwc->usb3_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) @@ -1362,8 +1443,10 @@ static int dwc3_core_init_mode(struct dwc3 *dwc) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST); - phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); + phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); + } ret = dwc3_host_init(dwc); if (ret) @@ -1820,9 +1903,12 @@ static int dwc3_read_port_info(struct dwc3 *dwc) dev_dbg(dwc->dev, "hs-ports: %u ss-ports: %u\n", dwc->num_usb2_ports, dwc->num_usb3_ports); - iounmap(base); + if ((dwc->num_usb2_ports > DWC3_MAX_PORTS) || + (dwc->num_usb3_ports > DWC3_MAX_PORTS)) + return -ENOMEM; + return 0; } @@ -2058,6 +2144,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) { unsigned long flags; u32 reg; + int i; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -2076,17 +2163,21 @@ static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg) /* Let controller to suspend HSPHY before PHY driver suspends */ if (dwc->dis_u2_susphy_quirk || dwc->dis_enblslpm_quirk) { - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | - DWC3_GUSB2PHYCFG_SUSPHY; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + reg |= DWC3_GUSB2PHYCFG_ENBLSLPM | + DWC3_GUSB2PHYCFG_SUSPHY; + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } /* Give some time for USB2 PHY to suspend */ usleep_range(5000, 6000); } - phy_pm_runtime_put_sync(dwc->usb2_generic_phy); - phy_pm_runtime_put_sync(dwc->usb3_generic_phy); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_pm_runtime_put_sync(dwc->usb2_generic_phy[i]); + phy_pm_runtime_put_sync(dwc->usb3_generic_phy[i]); + } break; case DWC3_GCTL_PRTCAP_OTG: /* do nothing during runtime_suspend */ @@ -2116,6 +2207,7 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) unsigned long flags; int ret; u32 reg; + int i; switch (dwc->current_dr_role) { case DWC3_GCTL_PRTCAP_DEVICE: @@ -2135,17 +2227,21 @@ static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg) break; } /* Restore GUSB2PHYCFG bits that were modified in suspend */ - reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - if (dwc->dis_u2_susphy_quirk) - reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; + for (i = 0; i < dwc->num_usb2_ports; i++) { + reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(i)); + if (dwc->dis_u2_susphy_quirk) + reg &= ~DWC3_GUSB2PHYCFG_SUSPHY; - if (dwc->dis_enblslpm_quirk) - reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; + if (dwc->dis_enblslpm_quirk) + reg &= ~DWC3_GUSB2PHYCFG_ENBLSLPM; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg); + dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(i), reg); + } - phy_pm_runtime_get_sync(dwc->usb2_generic_phy); - phy_pm_runtime_get_sync(dwc->usb3_generic_phy); + for (i = 0; i < dwc->num_usb2_ports; i++) { + phy_pm_runtime_get_sync(dwc->usb2_generic_phy[i]); + phy_pm_runtime_get_sync(dwc->usb3_generic_phy[i]); + } break; case DWC3_GCTL_PRTCAP_OTG: /* nothing to do on runtime_resume */ diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 0840808e8a40..058a747d8a32 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -33,6 +33,9 @@ #include +/* Number of ports supported by a multiport controller */ +#define DWC3_MAX_PORTS 4 + #define DWC3_MSG_MAX 500 /* Global constants */ @@ -1027,8 +1030,8 @@ struct dwc3_scratchpad_array { * @usb_psy: pointer to power supply interface. * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY - * @usb2_generic_phy: pointer to USB2 PHY - * @usb3_generic_phy: pointer to USB3 PHY + * @usb2_generic_phy: pointer to array of USB2 PHY + * @usb3_generic_phy: pointer to array of USB3 PHY * @num_usb2_ports: number of USB2 ports * @num_usb3_ports: number of USB3 ports * @phys_ready: flag to indicate that PHYs are ready @@ -1167,8 +1170,8 @@ struct dwc3 { struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; - struct phy *usb2_generic_phy; - struct phy *usb3_generic_phy; + struct phy *usb2_generic_phy[DWC3_MAX_PORTS]; + struct phy *usb3_generic_phy[DWC3_MAX_PORTS]; u8 num_usb2_ports; u8 num_usb3_ports; diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c index 039bf241769a..9aec41f1ad43 100644 --- a/drivers/usb/dwc3/drd.c +++ b/drivers/usb/dwc3/drd.c @@ -331,6 +331,7 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) u32 reg; int id; unsigned long flags; + int i; if (dwc->dr_mode != USB_DR_MODE_OTG) return; @@ -386,9 +387,12 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) } else { if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, true); - if (dwc->usb2_generic_phy) - phy_set_mode(dwc->usb2_generic_phy, - PHY_MODE_USB_HOST); + for (i = 0; i < dwc->num_usb2_ports; i++) { + if (dwc->usb2_generic_phy[i]) { + phy_set_mode(dwc->usb2_generic_phy[i], + PHY_MODE_USB_HOST); + } + } } break; case DWC3_OTG_ROLE_DEVICE: @@ -400,9 +404,8 @@ void dwc3_otg_update(struct dwc3 *dwc, bool ignore_idstatus) if (dwc->usb2_phy) otg_set_vbus(dwc->usb2_phy->otg, false); - if (dwc->usb2_generic_phy) - phy_set_mode(dwc->usb2_generic_phy, - PHY_MODE_USB_DEVICE); + if (dwc->usb2_generic_phy[0]) + phy_set_mode(dwc->usb2_generic_phy[0], PHY_MODE_USB_DEVICE); ret = dwc3_gadget_init(dwc); if (ret) dev_err(dwc->dev, "failed to initialize peripheral\n"); From patchwork Thu Jul 27 22:33:03 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 707166 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CDF76C00528 for ; Thu, 27 Jul 2023 22:35:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233225AbjG0WfI (ORCPT ); Thu, 27 Jul 2023 18:35:08 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49054 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233150AbjG0Wer (ORCPT ); Thu, 27 Jul 2023 18:34:47 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id ED5BC35AB; Thu, 27 Jul 2023 15:34:16 -0700 (PDT) Received: from pps.filterd (m0279873.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 36RKIj74015134; Thu, 27 Jul 2023 22:34:08 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=VSgr7GQMu0oxXRIZ+p2Owp962oHKtnM365/vgl+plDg=; b=V5ylW/sXOB8auPO30vYZ5uOWe45qO8gv8H94APt628dk7IgeZ01eBeIZeQb0ZU8j0eJ+ oWG7jdQ7Fp1VD2d6ftkNBtbYESKnWRCbzf2Kk3fIHW4RoXqQF6NRg5USSyF0UX8ezSOU 34RI54fyQbO95oL1VbrCEwRmRfKJFBlHdSSwu6n7Hi4YJfz3JMql+YBb7DX3oCINetQ7 MloXIBuwrUQwRfROQstNxEsrsmJYa0f14NNgbHeDVSK9R0PCdl0NMhFGkJjiXgGdTdxq htGCkKk0oNN5waLjddh93TSI8klVX6lwjbIMcN0OYbPLYHI80VXDNPLHc36o4w10KF8x 8A== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3s3mpt20jc-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:34:07 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 36RMY6GU013461 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:34:06 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Thu, 27 Jul 2023 15:34:00 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold , Mathias Nyman CC: , , , , , , , , , Krishna Kurapati Subject: [PATCH v10 07/11] usb: dwc3: qcom: Enable wakeup for applicable ports of multiport Date: Fri, 28 Jul 2023 04:03:03 +0530 Message-ID: <20230727223307.8096-8-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230727223307.8096-1-quic_kriskura@quicinc.com> References: <20230727223307.8096-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: mkGJOnaucjrSbnzEPhtgQyxglIfnyZsl X-Proofpoint-GUID: mkGJOnaucjrSbnzEPhtgQyxglIfnyZsl X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-07-27_10,2023-07-26_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 priorityscore=1501 adultscore=0 spamscore=0 mlxscore=0 phishscore=0 suspectscore=0 lowpriorityscore=0 bulkscore=0 clxscore=1015 mlxlogscore=866 malwarescore=0 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2306200000 definitions=main-2307270205 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Currently wakeup is supported by only single port controllers. Read speed of each port and accordingly enable IRQ's for those ports. Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/dwc3-qcom.c | 64 ++++++++++++++++++++---------------- 1 file changed, 35 insertions(+), 29 deletions(-) diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index ad89ded116d3..a98223291306 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -81,7 +81,7 @@ struct dwc3_qcom { int dp_hs_phy_irq[DWC3_MAX_PORTS]; int dm_hs_phy_irq[DWC3_MAX_PORTS]; int ss_phy_irq[DWC3_MAX_PORTS]; - enum usb_device_speed usb2_speed; + enum usb_device_speed usb2_speed[DWC3_MAX_PORTS]; struct extcon_dev *edev; struct extcon_dev *host_edev; @@ -349,7 +349,8 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) return dwc->xhci; } -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, + int port_index) { struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); struct usb_device *udev; @@ -362,12 +363,10 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) /* * It is possible to query the speed of all children of - * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code - * currently supports only 1 port per controller. So - * this is sufficient. + * USB2.0 root hub via usb_hub_for_each_child(). */ #ifdef CONFIG_USB - udev = usb_hub_find_child(hcd->self.root_hub, 1); + udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1); #else udev = NULL; #endif @@ -400,23 +399,29 @@ static void dwc3_qcom_disable_wakeup_irq(int irq) static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) { + int i; + dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq); - if (qcom->usb2_speed == USB_SPEED_LOW) { - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[0]); - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || - (qcom->usb2_speed == USB_SPEED_FULL)) { - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[0]); - } else { - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[0]); - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[0]); - } + for (i = 0; i < qcom->data->num_ports; i++) { + if (qcom->usb2_speed[i] == USB_SPEED_LOW) { + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[i]); + } else if ((qcom->usb2_speed[i] == USB_SPEED_HIGH) || + (qcom->usb2_speed[i] == USB_SPEED_FULL)) { + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[i]); + } else { + dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq[i]); + dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq[i]); + } - dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq[0]); + dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq[i]); + } } static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) { + int i; + dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq, 0); /* @@ -427,22 +432,25 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) * disconnect and remote wakeup. When no device is connected, configure both * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario. */ + for (i = 0; i < qcom->data->num_ports; i++) { + qcom->usb2_speed[i] = dwc3_qcom_read_usb2_speed(qcom, i); - if (qcom->usb2_speed == USB_SPEED_LOW) { - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[0], + if (qcom->usb2_speed[i] == USB_SPEED_LOW) { + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[i], IRQ_TYPE_EDGE_FALLING); - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || - (qcom->usb2_speed == USB_SPEED_FULL)) { - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[0], + } else if ((qcom->usb2_speed[i] == USB_SPEED_HIGH) || + (qcom->usb2_speed[i] == USB_SPEED_FULL)) { + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[i], IRQ_TYPE_EDGE_FALLING); - } else { - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[0], + } else { + dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq[i], IRQ_TYPE_EDGE_RISING); - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[0], + dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq[i], IRQ_TYPE_EDGE_RISING); - } + } - dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq[0], 0); + dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq[i], 0); + } } static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) @@ -468,10 +476,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) * The role is stable during suspend as role switching is done from a * freezable workqueue. */ - if (dwc3_qcom_is_host(qcom) && wakeup) { - qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom); + if (dwc3_qcom_is_host(qcom) && wakeup) dwc3_qcom_enable_interrupts(qcom); - } qcom->is_suspended = true; From patchwork Thu Jul 27 22:33:05 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 707165 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D56D9C04FE2 for ; Thu, 27 Jul 2023 22:35:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233309AbjG0WfN (ORCPT ); Thu, 27 Jul 2023 18:35:13 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49066 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233106AbjG0Weu (ORCPT ); Thu, 27 Jul 2023 18:34:50 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A028730DB; Thu, 27 Jul 2023 15:34:31 -0700 (PDT) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 36RMY8MR024877; Thu, 27 Jul 2023 22:34:19 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=SiUPpHVPKRbwPLHTDVrNlrJG14v47Iu69ZgAEXS1DOU=; b=JrfspDxgDd6F5/ZVHBfUTTaVgLAaumPfHUKME88ZQAeBSwTcsR8TMHMeb1MBfqdvSj+e g1VtNTGjbFa2xh+oST+OmyMX7N3Yez2vWy8/JBswM8aSqdbyejPrQYjnJkkHzpd3XnXk mwjJs0pQBnKvUpEXStqUeiKv3c9zn/s/FXR9cDS6CtolX6oVK4FMTex4iEIbfDFkMvIn ftK5KQ+ZuW0iAfllsKrX28vSpQg7PUh3WLO/1DsjqnsJy9/Yoh0lTLg1k/uQTX90DWkZ EedRPXxxAQUr9aYxVwa+D0VIMWzCTprexyPvcxLSJbItBm55MeLxZYtEWYyZmRALPeP5 1w== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3s3ufuruud-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:34:19 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 36RMYIST002012 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:34:18 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Thu, 27 Jul 2023 15:34:12 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold , Mathias Nyman CC: , , , , , , , , , Krishna Kurapati Subject: [PATCH v10 09/11] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 Date: Fri, 28 Jul 2023 04:03:05 +0530 Message-ID: <20230727223307.8096-10-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230727223307.8096-1-quic_kriskura@quicinc.com> References: <20230727223307.8096-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: iJu5XktR3fKYzL5WsNjsn2WzotyRVfxp X-Proofpoint-ORIG-GUID: iJu5XktR3fKYzL5WsNjsn2WzotyRVfxp X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-07-27_10,2023-07-26_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 lowpriorityscore=0 impostorscore=0 bulkscore=0 mlxlogscore=999 mlxscore=0 clxscore=1015 priorityscore=1501 adultscore=0 phishscore=0 suspectscore=0 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2306200000 definitions=main-2307270205 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add USB and DWC3 node for tertiary port of SC8280 along with multiport IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride platforms. Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 77 ++++++++++++++++++++++++++ 1 file changed, 77 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index ac0596dfdbc4..a9401351d49c 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -3329,6 +3329,83 @@ system-cache-controller@9200000 { interrupts = ; }; + usb_2: usb@a4f8800 { + compatible = "qcom,sc8280xp-dwc3-mp"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>, + <&pdc 126 IRQ_TYPE_EDGE_RISING>, + <&pdc 129 IRQ_TYPE_EDGE_RISING>, + <&pdc 128 IRQ_TYPE_EDGE_RISING>, + <&pdc 131 IRQ_TYPE_EDGE_RISING>, + <&pdc 130 IRQ_TYPE_EDGE_RISING>, + <&pdc 133 IRQ_TYPE_EDGE_RISING>, + <&pdc 132 IRQ_TYPE_EDGE_RISING>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 857 IRQ_TYPE_LEVEL_HIGH>, + <&intc GIC_SPI 856 IRQ_TYPE_LEVEL_HIGH>; + + interrupt-names = "dp_hs_phy_1", "dm_hs_phy_1", + "dp_hs_phy_2", "dm_hs_phy_2", + "dp_hs_phy_3", "dm_hs_phy_3", + "dp_hs_phy_4", "dm_hs_phy_4", + "ss_phy_1", "ss_phy_2", + "pwr_event_1", + "pwr_event_2", + "pwr_event_3", + "pwr_event_4"; + + power-domains = <&gcc USB30_MP_GDSC>; + required-opps = <&rpmhpd_opp_nom>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_MP 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_MP 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + wakeup-source; + + status = "disabled"; + + usb_2_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x800 0x0>; + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>, + <&usb_2_hsphy1>, <&usb_2_qmpphy1>, + <&usb_2_hsphy2>, + <&usb_2_hsphy3>; + phy-names = "usb2-port0", "usb3-port0", + "usb2-port1", "usb3-port1", + "usb2-port2", + "usb2-port3"; + }; + }; + usb_0: usb@a6f8800 { compatible = "qcom,sc8280xp-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; From patchwork Thu Jul 27 22:33:06 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 707164 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C23D6C00528 for ; Thu, 27 Jul 2023 22:36:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233058AbjG0Wgi (ORCPT ); Thu, 27 Jul 2023 18:36:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49492 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232924AbjG0Wgd (ORCPT ); Thu, 27 Jul 2023 18:36:33 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 51D5F30DC; Thu, 27 Jul 2023 15:36:01 -0700 (PDT) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 36RLt8Gm007159; Thu, 27 Jul 2023 22:34:48 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=OXUmFVVUOVri+A7xeyrlxu0XGoDEkgkJkvkUCvtbXAQ=; b=HMOR8Q5HVc9ZHVYavg9pb2skt9GU+jfMP8Yan3ENt395MtoO4l+1cYZBJlnoGKyY3JZG v5/uf4k9tXxszpvHEzlNthu5mjxLPpqCfRGIm9RDqTp8V8Az09ypiF4zPdvNAoHNDBJr uyQ//92oglIaOLwuHv+mqGJe+Bive4WDPchv116fiYY/5gl06PkhSH7TsVgJPjpauxqc 6APczoq9jHayV5nhVzDK6qMb27rKt/mvUPps9Rvfjg4m0KjuGM0RRP2+iSVQW0Ge1WKS SWvMfoG5c41JtJwImPBLIGjmS97Z2YFoN0MOet/H7uvIG67oQX7DC0Jl4sp/HaWgTx72 uw== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3s3ufuruuj-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:34:48 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 36RMYOIn002072 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Thu, 27 Jul 2023 22:34:24 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.1118.30; Thu, 27 Jul 2023 15:34:18 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng , Johan Hovold , Mathias Nyman CC: , , , , , , , , , Krishna Kurapati Subject: [PATCH v10 10/11] arm64: dts: qcom: sa8295p: Enable tertiary controller and its 4 USB ports Date: Fri, 28 Jul 2023 04:03:06 +0530 Message-ID: <20230727223307.8096-11-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230727223307.8096-1-quic_kriskura@quicinc.com> References: <20230727223307.8096-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: O72R_t_NOq5st84HuiMeW-dFSvTWF7fe X-Proofpoint-ORIG-GUID: O72R_t_NOq5st84HuiMeW-dFSvTWF7fe X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.591,FMLib:17.11.176.26 definitions=2023-07-27_10,2023-07-26_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 lowpriorityscore=0 impostorscore=0 bulkscore=0 mlxlogscore=849 mlxscore=0 clxscore=1015 priorityscore=1501 adultscore=0 phishscore=0 suspectscore=0 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2306200000 definitions=main-2307270206 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Enable tertiary controller for SA8295P (based on SC8280XP). Add pinctrl support for usb ports to provide VBUS to connected peripherals. Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 53 ++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts index fd253942e5e5..473fe858fbed 100644 --- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -9,6 +9,7 @@ #include #include #include +#include #include "sa8540p.dtsi" #include "sa8540p-pmics.dtsi" @@ -584,6 +585,20 @@ &usb_1_qmpphy { status = "okay"; }; +&usb_2 { + pinctrl-0 = <&usb2_en_state>, + <&usb3_en_state>, + <&usb4_en_state>, + <&usb5_en_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; +}; + &usb_2_hsphy0 { vdda-pll-supply = <&vreg_l5a>; vdda18-supply = <&vreg_l7g>; @@ -729,3 +744,41 @@ wake-n-pins { }; }; }; + +&pmm8540c_gpios { + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; +}; + +&pmm8540e_gpios { + usb3_en_state: usb3-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; +}; + +&pmm8540g_gpios { + usb4_en_state: usb4-en-state { + pins = "gpio5"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; + + usb5_en_state: usb5-en-state { + pins = "gpio9"; + function = "normal"; + qcom,drive-strength = ; + output-high; + power-source = <0>; + }; +};