From patchwork Mon May 8 21:20:06 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 680801 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A0E68C7EE25 for ; Mon, 8 May 2023 21:20:40 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233813AbjEHVUi (ORCPT ); Mon, 8 May 2023 17:20:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59610 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233757AbjEHVU2 (ORCPT ); Mon, 8 May 2023 17:20:28 -0400 Received: from mail-lf1-x136.google.com (mail-lf1-x136.google.com [IPv6:2a00:1450:4864:20::136]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CA20A7D87 for ; Mon, 8 May 2023 14:20:19 -0700 (PDT) Received: by mail-lf1-x136.google.com with SMTP id 2adb3069b0e04-4f14f266b72so3396927e87.1 for ; Mon, 08 May 2023 14:20:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1683580818; x=1686172818; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=9I/Z9v0khLJ/dFA45l8m+kaD8pFbfPgeSZ6r7wbMHsQ=; b=lMvVYaZUcEFKzhwfnJ1p7aXj1pOZ+PjOzXHuyIKE88+cAzHhxCNjsnuNaYO5lSS3G5 ICy2b8LkbdeJcambKmemQPPdWmkfAw8JVaVYYGq2KruTY647JGLO3/DH6mhe+vxpIhZX W9nMSLGuUYG461JiOR3px/gMOkKnuJRmtxjSmriYsyHJ0K5DO8bP/UViFIuaLOAoAYCp kjaXj6XpSTYARRgOTsY+8LJ+nfxR0TBSc8utkCsTPTut3pgF/cYa4GBS3b3gr0X1cqFp 5W1F8hcWpXkjoHQ8SCmu3saQ79tbmr8K2SgGICIXBIJ+hoPP1ZqtRDCdcy8I6+VgdW62 /VwA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683580818; x=1686172818; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=9I/Z9v0khLJ/dFA45l8m+kaD8pFbfPgeSZ6r7wbMHsQ=; b=MX905iq/mgu0zbpC1u63xPCBHTVB2wCjhGJ6zbDCbfIn6+Xi6hgffy+w5Jdu6FuSI6 g8CH7Wfge+HQ3Xet5RwnbsK0yX0pW1h58y/5mJatNf+lu2Z3BnX4uHrgjkIee+EMECp8 VHr7O2OoBQ9Ew/VPKoW39icbBkAGEtMmInQoqEsC7LIiekMXjIet0PWs4hJbpaXDONi/ 12VXlkUdEm3urNM3ROEL5htLNMIKDeQUnRQcVNx4W3oNsUW6V6eQB2vhPAjzDuas5Lqe WRbgQqcH2cq66gAG9mmtNdZPy9GJcS9zXHzebwGUUxBh9puKtVmWXDzlx/8f+BJwORCC V9Hg== X-Gm-Message-State: AC+VfDwnIw6dlzGRE85qTUbP3lNflUg7R9FfRobEdlvX3AAo395ShpyW TPcMh29tX4Fn0Gnbv2lT0AX6lQ== X-Google-Smtp-Source: ACHHUZ5bYyxTWMeEl9rAnycDEUNVRJOdtGPutuP4iHOZ2T5rSwZCG/qJHNbIJb+LlNvvG3/O+LYvYw== X-Received: by 2002:ac2:508b:0:b0:4f1:4812:e12b with SMTP id f11-20020ac2508b000000b004f14812e12bmr118812lfm.52.1683580817828; Mon, 08 May 2023 14:20:17 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 4-20020ac24844000000b004edc3bd7fa1sm102164lfy.201.2023.05.08.14.20.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 May 2023 14:20:17 -0700 (PDT) From: Linus Walleij Date: Mon, 08 May 2023 23:20:06 +0200 Subject: [PATCH v4 1/4] Input: ads7846 - Convert to use software nodes MIME-Version: 1.0 Message-Id: <20230430-nokia770-regression-v4-1-9b6dc5536b17@linaro.org> References: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> In-Reply-To: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> To: Aaro Koskinen , Janusz Krzysztofik , Tony Lindgren , Russell King , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Thomas Bogendoerfer , Dmitry Torokhov , Mark Brown , Bartosz Golaszewski , Andreas Kemnade , Helge Deller , Ulf Hansson Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, linux-input@vger.kernel.org, linux-spi@vger.kernel.org, linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-mmc@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.1 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org The Nokia 770 is using GPIOs from the global numberspace on the CBUS node to pass down to the LCD controller. This regresses when we let the OMAP GPIO driver use dynamic GPIO base. The Nokia 770 now has dynamic allocation of IRQ numbers, so this needs to be fixed for it to work. As this is the only user of LCD MIPID we can easily augment the driver to use a GPIO descriptor instead and resolve the issue. The platform data .shutdown() callback wasn't even used in the code, but we encode a shutdown asserting RESET in the remove() callback for completeness sake. The CBUS also has the ADS7846 touchscreen attached. Populate the devices on the Nokia 770 CBUS I2C using software nodes instead of platform data quirks. This includes the LCD and the ADS7846 touchscreen so the conversion just brings the LCD along with it as software nodes is an all-or-nothing design pattern. The ADS7846 has some limited support for using GPIO descriptors, let's convert it over completely to using device properties and then fix all remaining boardfile users to provide all platform data using software nodes. Dump the of includes and of_match_ptr() in the ADS7846 driver as part of the job. Since we have to move ADS7846 over to obtaining the GPIOs it is using exclusively from descriptors, we provide descriptor tables for the two remaining in-kernel boardfiles using ADS7846: - PXA Spitz - MIPS Alchemy DB1000 development board It was too hard for me to include software node conversion of these two remaining users at this time: the spitz is using a hscync callback in the platform data that would require further GPIO descriptor conversion of the Spitz, and moving the hsync callback down into the driver: it will just become too big of a job, but it can be done separately. The MIPS Alchemy DB1000 is simply something I cannot test, so take the easier approach of just providing some GPIO descriptors in this case as I don't want the patch to grow too intrusive. As we see that several device trees have incorrect polarity flags and just expect to bypass the gpiolib polarity handling, fix up all device trees too, in a separate patch. Suggested-by: Dmitry Torokhov Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Signed-off-by: Linus Walleij Reviewed-by: Linus Walleij --- ChangeLog v3->v4: - Fix all board file polarity flags to be active low, because this pendown signal is active low. - Fix all erroneous device trees too. - Drop some unnecessary commas. ChangeLog v2->v3: - Drop leftover OF ifdefs no longer needed and causing compile errors. --- arch/arm/mach-omap1/board-nokia770.c | 98 +++++++++++++++++---------- arch/arm/mach-pxa/spitz.c | 11 +++- arch/mips/alchemy/devboards/db1000.c | 11 +++- drivers/input/touchscreen/ads7846.c | 113 ++++++++++++-------------------- drivers/video/fbdev/omap/lcd_mipid.c | 10 +++ include/linux/platform_data/lcd-mipid.h | 2 - include/linux/spi/ads7846.h | 2 - 7 files changed, 135 insertions(+), 112 deletions(-) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index a501a473ffd6..8a1f2572deea 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -8,15 +8,16 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include -#include #include #include @@ -35,6 +36,25 @@ #include "clock.h" #include "mmc.h" +static const struct software_node nokia770_mpuio_gpiochip_node = { + .name = "mpuio", +}; + +static const struct software_node nokia770_gpiochip1_node = { + .name = "gpio-0-15", +}; + +static const struct software_node nokia770_gpiochip2_node = { + .name = "gpio-16-31", +}; + +static const struct software_node *nokia770_gpiochip_nodes[] = { + &nokia770_mpuio_gpiochip_node, + &nokia770_gpiochip1_node, + &nokia770_gpiochip2_node, + NULL +}; + #define ADS7846_PENDOWN_GPIO 15 static const unsigned int nokia770_keymap[] = { @@ -85,40 +105,46 @@ static struct platform_device *nokia770_devices[] __initdata = { &nokia770_kp_device, }; -static void mipid_shutdown(struct mipid_platform_data *pdata) -{ - if (pdata->nreset_gpio != -1) { - printk(KERN_INFO "shutdown LCD\n"); - gpio_set_value(pdata->nreset_gpio, 0); - msleep(120); - } -} - -static struct mipid_platform_data nokia770_mipid_platform_data = { - .shutdown = mipid_shutdown, -}; +static struct mipid_platform_data nokia770_mipid_platform_data = { }; static const struct omap_lcd_config nokia770_lcd_config __initconst = { .ctrl_name = "hwa742", }; +static const struct property_entry nokia770_mipid_props[] = { + PROPERTY_ENTRY_GPIO("reset-gpios", &nokia770_gpiochip1_node, + 13, GPIO_ACTIVE_LOW), + { } +}; + +static const struct software_node nokia770_mipid_swnode = { + .name = "lcd_mipid", + .properties = nokia770_mipid_props, +}; + static void __init mipid_dev_init(void) { - nokia770_mipid_platform_data.nreset_gpio = 13; nokia770_mipid_platform_data.data_lines = 16; omapfb_set_lcd_config(&nokia770_lcd_config); } -static struct ads7846_platform_data nokia770_ads7846_platform_data __initdata = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .gpio_pendown = ADS7846_PENDOWN_GPIO, +static const struct property_entry nokia770_ads7846_props[] = { + PROPERTY_ENTRY_U32("touchscreen-size-x", 4096), + PROPERTY_ENTRY_U32("touchscreen-size-y", 4096), + PROPERTY_ENTRY_U32("touchscreen-max-pressure", 256), + PROPERTY_ENTRY_U32("touchscreen-average-samples", 10), + PROPERTY_ENTRY_U16("ti,x-plate-ohms", 180), + PROPERTY_ENTRY_U16("ti,debounce-tol", 3), + PROPERTY_ENTRY_U16("ti,debounce-rep", 1), + PROPERTY_ENTRY_GPIO("pendown-gpios", &nokia770_gpiochip1_node, + ADS7846_PENDOWN_GPIO, GPIO_ACTIVE_LOW), + { } +}; + +static const struct software_node nokia770_ads7846_swnode = { + .name = "ads7846", + .properties = nokia770_ads7846_props, }; static struct spi_board_info nokia770_spi_board_info[] __initdata = { @@ -128,13 +154,14 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = { .chip_select = 3, .max_speed_hz = 12000000, .platform_data = &nokia770_mipid_platform_data, + .swnode = &nokia770_mipid_swnode, }, [1] = { .modalias = "ads7846", .bus_num = 2, .chip_select = 0, .max_speed_hz = 2500000, - .platform_data = &nokia770_ads7846_platform_data, + .swnode = &nokia770_ads7846_swnode, }, }; @@ -212,14 +239,16 @@ static inline void nokia770_mmc_init(void) #endif #if IS_ENABLED(CONFIG_I2C_CBUS_GPIO) -static struct gpiod_lookup_table nokia770_cbus_gpio_table = { - .dev_id = "i2c-cbus-gpio.2", - .table = { - GPIO_LOOKUP_IDX("mpuio", 9, NULL, 0, 0), /* clk */ - GPIO_LOOKUP_IDX("mpuio", 10, NULL, 1, 0), /* dat */ - GPIO_LOOKUP_IDX("mpuio", 11, NULL, 2, 0), /* sel */ - { }, - }, + +static const struct software_node_ref_args nokia770_cbus_gpio_refs[] = { + SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_swnode, 9, 0), + SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_swnode, 10, 0), + SOFTWARE_NODE_REFERENCE(&nokia770_mpuio_gpiochip_swnode, 11, 0), +}; + +static const struct property_entry nokia770_ads7846_props[] = { + PROPERTY_ENTRY_REF_ARRAY("gpios", nokia770_cbus_gpio_refs), + { } }; static struct platform_device nokia770_cbus_device = { @@ -253,7 +282,8 @@ static void __init nokia770_cbus_init(void) nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); i2c_register_board_info(2, nokia770_i2c_board_info_2, ARRAY_SIZE(nokia770_i2c_board_info_2)); - gpiod_add_lookup_table(&nokia770_cbus_gpio_table); + device_create_managed_software_node(&nokia770_cbus_device.dev, + nokia770_cbus_props, NULL); platform_device_register(&nokia770_cbus_device); } #else /* CONFIG_I2C_CBUS_GPIO */ @@ -273,8 +303,8 @@ static void __init omap_nokia770_init(void) /* Unmask SleepX signal */ omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); + software_node_register_node_group(nokia770_gpiochip_nodes); platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); - nokia770_spi_board_info[1].irq = gpio_to_irq(15); spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); omap_serial_init(); diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4325bdc2b9ff..28e376e06fdc 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -506,10 +506,18 @@ static struct ads7846_platform_data spitz_ads7846_info = { .x_plate_ohms = 419, .y_plate_ohms = 486, .pressure_max = 1024, - .gpio_pendown = SPITZ_GPIO_TP_INT, .wait_for_sync = spitz_ads7846_wait_for_hsync, }; +static struct gpiod_lookup_table spitz_ads7846_gpio_table = { + .dev_id = "spi2.0", + .table = { + GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT, + "pendown", GPIO_ACTIVE_LOW), + { } + }, +}; + static void spitz_bl_kick_battery(void) { void (*kick_batt)(void); @@ -594,6 +602,7 @@ static void __init spitz_spi_init(void) else gpiod_add_lookup_table(&spitz_lcdcon_gpio_table); + gpiod_add_lookup_table(&spitz_ads7846_gpio_table); gpiod_add_lookup_table(&spitz_spi_gpio_table); pxa2xx_set_spi_info(2, &spitz_spi_info); spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices)); diff --git a/arch/mips/alchemy/devboards/db1000.c b/arch/mips/alchemy/devboards/db1000.c index 2c52ee27b4f2..79d66faa8482 100644 --- a/arch/mips/alchemy/devboards/db1000.c +++ b/arch/mips/alchemy/devboards/db1000.c @@ -381,13 +381,21 @@ static struct platform_device db1100_mmc1_dev = { static struct ads7846_platform_data db1100_touch_pd = { .model = 7846, .vref_mv = 3300, - .gpio_pendown = 21, }; static struct spi_gpio_platform_data db1100_spictl_pd = { .num_chipselect = 1, }; +static struct gpiod_lookup_table db1100_touch_gpio_table = { + .dev_id = "spi0.0", + .table = { + GPIO_LOOKUP("alchemy-gpio2", 21, + "pendown", GPIO_ACTIVE_LOW), + { } + }, +}; + static struct spi_board_info db1100_spi_info[] __initdata = { [0] = { .modalias = "ads7846", @@ -474,6 +482,7 @@ int __init db1000_dev_setup(void) pfc |= (1 << 0); /* SSI0 pins as GPIOs */ alchemy_wrsys(pfc, AU1000_SYS_PINFUNC); + gpiod_add_lookup_table(&db1100_touch_gpio_table); spi_register_board_info(db1100_spi_info, ARRAY_SIZE(db1100_spi_info)); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index bb1058b1e7fd..40eb27f1b23f 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -24,11 +24,8 @@ #include #include #include -#include -#include -#include +#include #include -#include #include #include #include @@ -140,7 +137,7 @@ struct ads7846 { int (*filter)(void *data, int data_idx, int *val); void *filter_data; int (*get_pendown_state)(void); - int gpio_pendown; + struct gpio_desc *gpio_pendown; void (*wait_for_sync)(void); }; @@ -223,7 +220,7 @@ static int get_pendown_state(struct ads7846 *ts) if (ts->get_pendown_state) return ts->get_pendown_state(); - return !gpio_get_value(ts->gpio_pendown); + return gpiod_get_value(ts->gpio_pendown); } static void ads7846_report_pen_up(struct ads7846 *ts) @@ -989,8 +986,6 @@ static int ads7846_setup_pendown(struct spi_device *spi, struct ads7846 *ts, const struct ads7846_platform_data *pdata) { - int err; - /* * REVISIT when the irq can be triggered active-low, or if for some * reason the touchscreen isn't hooked up, we don't need to access @@ -999,25 +994,15 @@ static int ads7846_setup_pendown(struct spi_device *spi, if (pdata->get_pendown_state) { ts->get_pendown_state = pdata->get_pendown_state; - } else if (gpio_is_valid(pdata->gpio_pendown)) { - - err = devm_gpio_request_one(&spi->dev, pdata->gpio_pendown, - GPIOF_IN, "ads7846_pendown"); - if (err) { - dev_err(&spi->dev, - "failed to request/setup pendown GPIO%d: %d\n", - pdata->gpio_pendown, err); - return err; + } else { + ts->gpio_pendown = gpiod_get(&spi->dev, "pendown", GPIOD_IN); + if (IS_ERR(ts->gpio_pendown)) { + dev_err(&spi->dev, "failed to request pendown GPIO\n"); + return PTR_ERR(ts->gpio_pendown); } - - ts->gpio_pendown = pdata->gpio_pendown; - if (pdata->gpio_pendown_debounce) - gpiod_set_debounce(gpio_to_desc(ts->gpio_pendown), + gpiod_set_debounce(ts->gpio_pendown, pdata->gpio_pendown_debounce); - } else { - dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n"); - return -EINVAL; } return 0; @@ -1119,7 +1104,6 @@ static int ads7846_setup_spi_msg(struct ads7846 *ts, return 0; } -#ifdef CONFIG_OF static const struct of_device_id ads7846_dt_ids[] = { { .compatible = "ti,tsc2046", .data = (void *) 7846 }, { .compatible = "ti,ads7843", .data = (void *) 7843 }, @@ -1130,20 +1114,14 @@ static const struct of_device_id ads7846_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, ads7846_dt_ids); -static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) +static const struct ads7846_platform_data *ads7846_get_props(struct device *dev) { struct ads7846_platform_data *pdata; - struct device_node *node = dev->of_node; - const struct of_device_id *match; + const struct platform_device_id *pdev_id; u32 value; - if (!node) { - dev_err(dev, "Device does not have associated DT data\n"); - return ERR_PTR(-EINVAL); - } - - match = of_match_device(ads7846_dt_ids, dev); - if (!match) { + pdev_id = device_get_match_data(dev); + if (!pdev_id) { dev_err(dev, "Unknown device model\n"); return ERR_PTR(-EINVAL); } @@ -1152,60 +1130,51 @@ static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) if (!pdata) return ERR_PTR(-ENOMEM); - pdata->model = (unsigned long)match->data; + pdata->model = (unsigned long)pdev_id->driver_data; - of_property_read_u16(node, "ti,vref-delay-usecs", - &pdata->vref_delay_usecs); - of_property_read_u16(node, "ti,vref-mv", &pdata->vref_mv); - pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on"); + device_property_read_u16(dev, "ti,vref-delay-usecs", + &pdata->vref_delay_usecs); + device_property_read_u16(dev, "ti,vref-mv", &pdata->vref_mv); + pdata->keep_vref_on = device_property_read_bool(dev, "ti,keep-vref-on"); - pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy"); + pdata->swap_xy = device_property_read_bool(dev, "ti,swap-xy"); - of_property_read_u16(node, "ti,settle-delay-usec", - &pdata->settle_delay_usecs); - of_property_read_u16(node, "ti,penirq-recheck-delay-usecs", - &pdata->penirq_recheck_delay_usecs); + device_property_read_u16(dev, "ti,settle-delay-usec", + &pdata->settle_delay_usecs); + device_property_read_u16(dev, "ti,penirq-recheck-delay-usecs", + &pdata->penirq_recheck_delay_usecs); - of_property_read_u16(node, "ti,x-plate-ohms", &pdata->x_plate_ohms); - of_property_read_u16(node, "ti,y-plate-ohms", &pdata->y_plate_ohms); + device_property_read_u16(dev, "ti,x-plate-ohms", &pdata->x_plate_ohms); + device_property_read_u16(dev, "ti,y-plate-ohms", &pdata->y_plate_ohms); - of_property_read_u16(node, "ti,x-min", &pdata->x_min); - of_property_read_u16(node, "ti,y-min", &pdata->y_min); - of_property_read_u16(node, "ti,x-max", &pdata->x_max); - of_property_read_u16(node, "ti,y-max", &pdata->y_max); + device_property_read_u16(dev, "ti,x-min", &pdata->x_min); + device_property_read_u16(dev, "ti,y-min", &pdata->y_min); + device_property_read_u16(dev, "ti,x-max", &pdata->x_max); + device_property_read_u16(dev, "ti,y-max", &pdata->y_max); /* * touchscreen-max-pressure gets parsed during * touchscreen_parse_properties() */ - of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min); - if (!of_property_read_u32(node, "touchscreen-min-pressure", &value)) + device_property_read_u16(dev, "ti,pressure-min", &pdata->pressure_min); + if (!device_property_read_u32(dev, "touchscreen-min-pressure", &value)) pdata->pressure_min = (u16) value; - of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max); + device_property_read_u16(dev, "ti,pressure-max", &pdata->pressure_max); - of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max); - if (!of_property_read_u32(node, "touchscreen-average-samples", &value)) + device_property_read_u16(dev, "ti,debounce-max", &pdata->debounce_max); + if (!device_property_read_u32(dev, "touchscreen-average-samples", &value)) pdata->debounce_max = (u16) value; - of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol); - of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep); + device_property_read_u16(dev, "ti,debounce-tol", &pdata->debounce_tol); + device_property_read_u16(dev, "ti,debounce-rep", &pdata->debounce_rep); - of_property_read_u32(node, "ti,pendown-gpio-debounce", + device_property_read_u32(dev, "ti,pendown-gpio-debounce", &pdata->gpio_pendown_debounce); - pdata->wakeup = of_property_read_bool(node, "wakeup-source") || - of_property_read_bool(node, "linux,wakeup"); - - pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0); + pdata->wakeup = device_property_read_bool(dev, "wakeup-source") || + device_property_read_bool(dev, "linux,wakeup"); return pdata; } -#else -static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev) -{ - dev_err(dev, "no platform data defined\n"); - return ERR_PTR(-EINVAL); -} -#endif static void ads7846_regulator_disable(void *regulator) { @@ -1269,7 +1238,7 @@ static int ads7846_probe(struct spi_device *spi) pdata = dev_get_platdata(dev); if (!pdata) { - pdata = ads7846_probe_dt(dev); + pdata = ads7846_get_props(dev); if (IS_ERR(pdata)) return PTR_ERR(pdata); } @@ -1426,7 +1395,7 @@ static struct spi_driver ads7846_driver = { .driver = { .name = "ads7846", .pm = pm_sleep_ptr(&ads7846_pm), - .of_match_table = of_match_ptr(ads7846_dt_ids), + .of_match_table = ads7846_dt_ids, }, .probe = ads7846_probe, .remove = ads7846_remove, diff --git a/drivers/video/fbdev/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c index 03cff39d392d..e4a7f0b824ff 100644 --- a/drivers/video/fbdev/omap/lcd_mipid.c +++ b/drivers/video/fbdev/omap/lcd_mipid.c @@ -7,6 +7,7 @@ */ #include #include +#include #include #include #include @@ -41,6 +42,7 @@ struct mipid_device { when we can issue the next sleep in/out command */ unsigned long hw_guard_wait; /* max guard time in jiffies */ + struct gpio_desc *reset; struct omapfb_device *fbdev; struct spi_device *spi; @@ -556,6 +558,12 @@ static int mipid_spi_probe(struct spi_device *spi) return -ENOMEM; } + /* This will de-assert RESET if active */ + md->reset = gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(md->reset)) + return dev_err_probe(&spi->dev, PTR_ERR(md->reset), + "no reset GPIO line\n"); + spi->mode = SPI_MODE_0; md->spi = spi; dev_set_drvdata(&spi->dev, md); @@ -574,6 +582,8 @@ static void mipid_spi_remove(struct spi_device *spi) { struct mipid_device *md = dev_get_drvdata(&spi->dev); + /* Asserts RESET */ + gpiod_set_value(md->reset, 1); mipid_disable(&md->panel); kfree(md); } diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h index 63f05eb23827..4927cfc5158c 100644 --- a/include/linux/platform_data/lcd-mipid.h +++ b/include/linux/platform_data/lcd-mipid.h @@ -15,10 +15,8 @@ enum mipid_test_result { #ifdef __KERNEL__ struct mipid_platform_data { - int nreset_gpio; int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); void (*set_bklight_level)(struct mipid_platform_data *pdata, int level); int (*get_bklight_level)(struct mipid_platform_data *pdata); diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index d424c1aadf38..a04c1c34c344 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -35,8 +35,6 @@ struct ads7846_platform_data { u16 debounce_tol; /* tolerance used for filtering */ u16 debounce_rep; /* additional consecutive good readings * required after the first two */ - int gpio_pendown; /* the GPIO used to decide the pendown - * state if get_pendown_state == NULL */ int gpio_pendown_debounce; /* platform specific debounce time for * the gpio_pendown */ int (*get_pendown_state)(void); From patchwork Mon May 8 21:20:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 680131 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5099EC7EE2D for ; Mon, 8 May 2023 21:20:42 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233845AbjEHVUj (ORCPT ); Mon, 8 May 2023 17:20:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59930 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233766AbjEHVUh (ORCPT ); Mon, 8 May 2023 17:20:37 -0400 Received: from mail-lf1-x130.google.com (mail-lf1-x130.google.com [IPv6:2a00:1450:4864:20::130]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CC6347D97 for ; Mon, 8 May 2023 14:20:20 -0700 (PDT) Received: by mail-lf1-x130.google.com with SMTP id 2adb3069b0e04-4f00c33c3d6so5773639e87.2 for ; Mon, 08 May 2023 14:20:20 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1683580819; x=1686172819; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=/Wp4D72mqNcj1hIUm5lP7PH7jzGtATEkkvBitN4BceE=; b=lCM2EAQjej+CVzfwGSa6bzAVa5SNksMB7eQj4chXzlnjaGKnjBbVEyjLghCkJA6vCP gbZV55dTdX6EejrBxKuzBQZEwbijkEuaBQxEl+IZRhs/zDBfLEgoWoHTQbCorJJ3hqF+ P5oByqye8JdxKM8+q32zcFYmYgw6tlnpQ7l5hSWL4CQ5Hu5UD0MyW/xhHb/PGwviKpLL 6kPxC8FSLMmJ8nFERFvzc0v52pqV6MEOjo9QMKRH472WhUq5PBK/ZRaTBpkJ0upqJVhy +GHjUskHZTgzPftYVUPDAqMx4lElfmhMcW84h0TjEnibSJBb0tzkCx8dRkPUWiOObUfF Zcsg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683580819; x=1686172819; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=/Wp4D72mqNcj1hIUm5lP7PH7jzGtATEkkvBitN4BceE=; b=iIwIphu8IFtyCgrqFlEcNicsFnNNG5H5EOEixEBIZPAO8jpXO7mPxb2ehca5O/gKDb FRrdUEkKNLfIsjd/cToSUn38ZYU5MJmqP415rSylMVI8P3RzIk6ZrkN2pCzrNTiGn2EQ +aiARRjGED6DdQcN6H/hXPzYY8wiHAmwvzE1MsoGLbvkd+1Ba4jko6R6EUYMfk3gf1PO ArHzVnnlvgRouQoSotp0V5t6lyMoA2Tgy/J8NAF8rmFOoG/9JWdcEhdk2M8uYI1fVcsI D0R+1lztE+6O7PZNen3HHq79fhBj8as94mRY0w65lVfhaROQxKTtEzQQ/a76I2TaAFue uDZg== X-Gm-Message-State: AC+VfDzWqDKLB+W5hWytIrxGIUB5Nk3hgkFQC0VakT4xIpmdcWpB+MsQ gqCgiHPVvKm+IY12yjUgyfzL9g== X-Google-Smtp-Source: ACHHUZ7mlnb57iwM/DMxx5HpNDR8bOhvincshn4HXDxzPkfNKKo16wcXaH+9PYK9qfJSCU+EBlarUA== X-Received: by 2002:ac2:5687:0:b0:4db:3882:8f42 with SMTP id 7-20020ac25687000000b004db38828f42mr131559lfr.45.1683580818982; Mon, 08 May 2023 14:20:18 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 4-20020ac24844000000b004edc3bd7fa1sm102164lfy.201.2023.05.08.14.20.17 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 May 2023 14:20:18 -0700 (PDT) From: Linus Walleij Date: Mon, 08 May 2023 23:20:07 +0200 Subject: [PATCH v4 2/4] ARM/mmc: Convert old mmci-omap to GPIO descriptors MIME-Version: 1.0 Message-Id: <20230430-nokia770-regression-v4-2-9b6dc5536b17@linaro.org> References: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> In-Reply-To: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> To: Aaro Koskinen , Janusz Krzysztofik , Tony Lindgren , Russell King , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Thomas Bogendoerfer , Dmitry Torokhov , Mark Brown , Bartosz Golaszewski , Andreas Kemnade , Helge Deller , Ulf Hansson Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, linux-input@vger.kernel.org, linux-spi@vger.kernel.org, linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-mmc@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.1 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org A recent change to the OMAP driver making it use a dynamic GPIO base created problems with some old OMAP1 board files, among them Nokia 770, SX1 and also the OMAP2 Nokia n8x0. Fix up all instances of GPIOs being used for the MMC driver by pushing the handling of power, slot selection and MMC "cover" into the driver as optional GPIOs. This is maybe not the most perfect solution as the MMC framework have some central handlers for some of the stuff, but it at least makes the situtation better and solves the immediate issue. Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Acked-by: Ulf Hansson Signed-off-by: Linus Walleij --- arch/arm/mach-omap1/board-nokia770.c | 43 ++++++----------- arch/arm/mach-omap1/board-sx1-mmc.c | 1 - arch/arm/mach-omap2/board-n8x0.c | 85 +++++++++++----------------------- drivers/mmc/host/omap.c | 46 +++++++++++++++++- include/linux/platform_data/mmc-omap.h | 2 - 5 files changed, 83 insertions(+), 94 deletions(-) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 8a1f2572deea..218c928f71b3 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -183,27 +183,23 @@ static struct omap_usb_config nokia770_usb_config __initdata = { #if IS_ENABLED(CONFIG_MMC_OMAP) -#define NOKIA770_GPIO_MMC_POWER 41 -#define NOKIA770_GPIO_MMC_SWITCH 23 - -static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on, - int vdd) -{ - gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on); - return 0; -} - -static int nokia770_mmc_get_cover_state(struct device *dev, int slot) -{ - return gpio_get_value(NOKIA770_GPIO_MMC_SWITCH); -} +static struct gpiod_lookup_table nokia770_mmc_gpio_table = { + .dev_id = "mmci-omap", + .table = { + /* Slot index 0, VSD power, GPIO 41 */ + GPIO_LOOKUP_IDX("gpio-32-47", 9, + "vsd", 0, GPIO_ACTIVE_HIGH), + /* Slot index 0, switch, GPIO 23 */ + GPIO_LOOKUP_IDX("gpio-16-31", 7, + "cover", 0, GPIO_ACTIVE_HIGH), + { } + }, +}; static struct omap_mmc_platform_data nokia770_mmc2_data = { .nr_slots = 1, .max_freq = 12000000, .slots[0] = { - .set_power = nokia770_mmc_set_power, - .get_cover_state = nokia770_mmc_get_cover_state, .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, .name = "mmcblk", }, @@ -213,20 +209,7 @@ static struct omap_mmc_platform_data *nokia770_mmc_data[OMAP16XX_NR_MMC]; static void __init nokia770_mmc_init(void) { - int ret; - - ret = gpio_request(NOKIA770_GPIO_MMC_POWER, "MMC power"); - if (ret < 0) - return; - gpio_direction_output(NOKIA770_GPIO_MMC_POWER, 0); - - ret = gpio_request(NOKIA770_GPIO_MMC_SWITCH, "MMC cover"); - if (ret < 0) { - gpio_free(NOKIA770_GPIO_MMC_POWER); - return; - } - gpio_direction_input(NOKIA770_GPIO_MMC_SWITCH); - + gpiod_add_lookup_table(&nokia770_mmc_gpio_table); /* Only the second MMC controller is used */ nokia770_mmc_data[1] = &nokia770_mmc2_data; omap1_init_mmc(nokia770_mmc_data, OMAP16XX_NR_MMC); diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c index f1c160924dfe..f183a8448a7b 100644 --- a/arch/arm/mach-omap1/board-sx1-mmc.c +++ b/arch/arm/mach-omap1/board-sx1-mmc.c @@ -9,7 +9,6 @@ * Copyright (C) 2007 Instituto Nokia de Tecnologia - INdT */ -#include #include #include "hardware.h" diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 3353b0a923d9..baa2f0341aed 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -11,6 +11,7 @@ #include #include #include +#include #include #include #include @@ -170,22 +171,32 @@ static struct spi_board_info n800_spi_board_info[] __initdata = { * GPIO23 and GPIO9 slot 2 EMMC on N810 * */ -#define N8X0_SLOT_SWITCH_GPIO 96 -#define N810_EMMC_VSD_GPIO 23 -#define N810_EMMC_VIO_GPIO 9 - static int slot1_cover_open; static int slot2_cover_open; static struct device *mmc_device; -static int n8x0_mmc_switch_slot(struct device *dev, int slot) -{ -#ifdef CONFIG_MMC_DEBUG - dev_dbg(dev, "Choose slot %d\n", slot + 1); -#endif - gpio_set_value(N8X0_SLOT_SWITCH_GPIO, slot); - return 0; -} +static struct gpiod_lookup_table nokia8xx_mmc_gpio_table = { + .dev_id = "mmci-omap", + .table = { + /* Slot switch, GPIO 96 */ + GPIO_LOOKUP("gpio-80-111", 16, + "switch", GPIO_ACTIVE_HIGH), + { } + }, +}; + +static struct gpiod_lookup_table nokia810_mmc_gpio_table = { + .dev_id = "mmci-omap", + .table = { + /* Slot index 1, VSD power, GPIO 23 */ + GPIO_LOOKUP_IDX("gpio-16-31", 7, + "vsd", 1, GPIO_ACTIVE_HIGH), + /* Slot index 1, VIO power, GPIO 9 */ + GPIO_LOOKUP_IDX("gpio-0-15", 9, + "vsd", 1, GPIO_ACTIVE_HIGH), + { } + }, +}; static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot, int power_on, int vdd) @@ -256,31 +267,13 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot, return 0; } -static void n810_set_power_emmc(struct device *dev, - int power_on) -{ - dev_dbg(dev, "Set EMMC power %s\n", power_on ? "on" : "off"); - - if (power_on) { - gpio_set_value(N810_EMMC_VSD_GPIO, 1); - msleep(1); - gpio_set_value(N810_EMMC_VIO_GPIO, 1); - msleep(1); - } else { - gpio_set_value(N810_EMMC_VIO_GPIO, 0); - msleep(50); - gpio_set_value(N810_EMMC_VSD_GPIO, 0); - msleep(50); - } -} - static int n8x0_mmc_set_power(struct device *dev, int slot, int power_on, int vdd) { if (board_is_n800() || slot == 0) return n8x0_mmc_set_power_menelaus(dev, slot, power_on, vdd); - n810_set_power_emmc(dev, power_on); + /* The n810 power will be handled by GPIO code in the driver */ return 0; } @@ -418,13 +411,6 @@ static void n8x0_mmc_shutdown(struct device *dev) static void n8x0_mmc_cleanup(struct device *dev) { menelaus_unregister_mmc_callback(); - - gpio_free(N8X0_SLOT_SWITCH_GPIO); - - if (board_is_n810()) { - gpio_free(N810_EMMC_VSD_GPIO); - gpio_free(N810_EMMC_VIO_GPIO); - } } /* @@ -433,7 +419,6 @@ static void n8x0_mmc_cleanup(struct device *dev) */ static struct omap_mmc_platform_data mmc1_data = { .nr_slots = 0, - .switch_slot = n8x0_mmc_switch_slot, .init = n8x0_mmc_late_init, .cleanup = n8x0_mmc_cleanup, .shutdown = n8x0_mmc_shutdown, @@ -463,14 +448,9 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -static struct gpio n810_emmc_gpios[] __initdata = { - { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" }, - { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" }, -}; - static void __init n8x0_mmc_init(void) { - int err; + gpiod_add_lookup_table(&nokia8xx_mmc_gpio_table); if (board_is_n810()) { mmc1_data.slots[0].name = "external"; @@ -483,20 +463,7 @@ static void __init n8x0_mmc_init(void) */ mmc1_data.slots[1].name = "internal"; mmc1_data.slots[1].ban_openended = 1; - } - - err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW, - "MMC slot switch"); - if (err) - return; - - if (board_is_n810()) { - err = gpio_request_array(n810_emmc_gpios, - ARRAY_SIZE(n810_emmc_gpios)); - if (err) { - gpio_free(N8X0_SLOT_SWITCH_GPIO); - return; - } + gpiod_add_lookup_table(&nokia810_mmc_gpio_table); } mmc1_data.nr_slots = 2; diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index ce78edfb402b..a14af21f12da 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -26,6 +26,7 @@ #include #include #include +#include #include @@ -111,6 +112,9 @@ struct mmc_omap_slot { struct mmc_request *mrq; struct mmc_omap_host *host; struct mmc_host *mmc; + struct gpio_desc *vsd; + struct gpio_desc *vio; + struct gpio_desc *cover; struct omap_mmc_slot_data *pdata; }; @@ -133,6 +137,7 @@ struct mmc_omap_host { int irq; unsigned char bus_mode; unsigned int reg_shift; + struct gpio_desc *slot_switch; struct work_struct cmd_abort_work; unsigned abort:1; @@ -216,8 +221,13 @@ static void mmc_omap_select_slot(struct mmc_omap_slot *slot, int claimed) if (host->current_slot != slot) { OMAP_MMC_WRITE(host, CON, slot->saved_con & 0xFC00); - if (host->pdata->switch_slot != NULL) - host->pdata->switch_slot(mmc_dev(slot->mmc), slot->id); + if (host->slot_switch) + /* + * With two slots and a simple GPIO switch, setting + * the GPIO to 0 selects slot ID 0, setting it to 1 + * selects slot ID 1. + */ + gpiod_set_value(host->slot_switch, slot->id); host->current_slot = slot; } @@ -297,6 +307,9 @@ static void mmc_omap_release_slot(struct mmc_omap_slot *slot, int clk_enabled) static inline int mmc_omap_cover_is_open(struct mmc_omap_slot *slot) { + /* If we have a GPIO then use that */ + if (slot->cover) + return gpiod_get_value(slot->cover); if (slot->pdata->get_cover_state) return slot->pdata->get_cover_state(mmc_dev(slot->mmc), slot->id); @@ -1106,6 +1119,11 @@ static void mmc_omap_set_power(struct mmc_omap_slot *slot, int power_on, host = slot->host; + if (slot->vsd) + gpiod_set_value(slot->vsd, power_on); + if (slot->vio) + gpiod_set_value(slot->vio, power_on); + if (slot->pdata->set_power != NULL) slot->pdata->set_power(mmc_dev(slot->mmc), slot->id, power_on, vdd); @@ -1240,6 +1258,23 @@ static int mmc_omap_new_slot(struct mmc_omap_host *host, int id) slot->power_mode = MMC_POWER_UNDEFINED; slot->pdata = &host->pdata->slots[id]; + /* Check for some optional GPIO controls */ + slot->vsd = gpiod_get_index_optional(host->dev, "vsd", + id, GPIOD_OUT_LOW); + if (IS_ERR(slot->vsd)) + return dev_err_probe(host->dev, PTR_ERR(slot->vsd), + "error looking up VSD GPIO\n"); + slot->vio = gpiod_get_index_optional(host->dev, "vio", + id, GPIOD_OUT_LOW); + if (IS_ERR(slot->vio)) + return dev_err_probe(host->dev, PTR_ERR(slot->vio), + "error looking up VIO GPIO\n"); + slot->cover = gpiod_get_index_optional(host->dev, "cover", + id, GPIOD_IN); + if (IS_ERR(slot->cover)) + return dev_err_probe(host->dev, PTR_ERR(slot->cover), + "error looking up cover switch GPIO\n"); + host->slots[id] = slot; mmc->caps = 0; @@ -1349,6 +1384,13 @@ static int mmc_omap_probe(struct platform_device *pdev) if (IS_ERR(host->virt_base)) return PTR_ERR(host->virt_base); + host->slot_switch = gpiod_get_optional(host->dev, "switch", + GPIOD_OUT_LOW); + if (IS_ERR(host->slot_switch)) + return dev_err_probe(host->dev, PTR_ERR(host->slot_switch), + "error looking up slot switch GPIO\n"); + + INIT_WORK(&host->slot_release_work, mmc_omap_slot_release_work); INIT_WORK(&host->send_stop_work, mmc_omap_send_stop_work); diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 91051e9907f3..054d0c3c5ec5 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -20,8 +20,6 @@ struct omap_mmc_platform_data { * maximum frequency on the MMC bus */ unsigned int max_freq; - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); /* initialize board-specific MMC functionality, can be NULL if * not supported */ int (*init)(struct device *dev); From patchwork Mon May 8 21:20:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 680130 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 4D4DAC7EE22 for ; Mon, 8 May 2023 21:20:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233831AbjEHVUq (ORCPT ); Mon, 8 May 2023 17:20:46 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59930 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233820AbjEHVUj (ORCPT ); Mon, 8 May 2023 17:20:39 -0400 Received: from mail-lf1-x130.google.com (mail-lf1-x130.google.com [IPv6:2a00:1450:4864:20::130]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3625983E0 for ; Mon, 8 May 2023 14:20:21 -0700 (PDT) Received: by mail-lf1-x130.google.com with SMTP id 2adb3069b0e04-4f13a72ff53so5611214e87.0 for ; Mon, 08 May 2023 14:20:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1683580820; x=1686172820; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=dK03E2M8l7bVCBNTqzVE5mVLTLIW5dP3PvhMkmEu44I=; b=LQvB+8ogRPv04y19WvA4bz7w/wJIcDWbnDtyZLlF61s4C3dXWsHviBgL1vZ0d8vTnQ iJTyC75PunKIctxUTawEGv6+kVpOsf5er8fGH700MPbKWcLhpODaZ93OyuL4lcRn7UZe yFKv2dnS3Me3T7gE5qoha4EG0IAvrgRQ9NHBCByMHoGLDdWoPoDX6JSnXPboi6ILpT+0 zYkoVFwxzISejMGf9FEwFuPsuQ6x78BajEOx208y++QUiNA9PcQLlLuAXQfUtaL4lXx7 LMigrZvibVzhQ+H5SUeQz9tseL99XDg0kfbiiE+hP7ldQeTKnG8o+3ev89OcHyzlVZj2 8RFw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683580820; x=1686172820; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=dK03E2M8l7bVCBNTqzVE5mVLTLIW5dP3PvhMkmEu44I=; b=JXOuMrKY2yAlCEin/xVFRFegeFEij4ispzzDCZD1/jCYC7XloOBAJ847NySyUjYCF5 aL3ycJ1f1fuYWhUtXdrliO4G1iUMqONWnT37BH7PjLlUoeSZ7sFBNZgCyHf+r2+e21Ga GPZTMyRFlzGvobG8GnYpL7Oh8+kGbcIwwQ8m/T7LbrDe80Q1NEii6wJA22jm9IRaBLLD VF+BQcZ2XiM51vBFel0wj8+a4oDg9VxvqtSrWwhXOBMwtLbL+j/jYty1yP8TAuI8ammM mz2WRAyuuU4f01bLnsfNgIqPB6eWkFveX4uGiqU7dejXHN4dWuYb2f0x8mVhH9EBLsI6 tmFQ== X-Gm-Message-State: AC+VfDy1+wxChdzbiw2c1LfDpBFjvHYuZMakhTRKXYqoAVRP83XOzU+1 zr7/mqv1ip75tHltSVxVKYMeHg== X-Google-Smtp-Source: ACHHUZ5h9zB+DF+SzOXMLkK9IEaMkoFaP5oV3ZE8LadUTKk9C4V94+SoqeKCIiPG3/AYEn/7ujSn7w== X-Received: by 2002:a19:550d:0:b0:4ef:d742:4dfe with SMTP id n13-20020a19550d000000b004efd7424dfemr124116lfe.65.1683580820134; Mon, 08 May 2023 14:20:20 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 4-20020ac24844000000b004edc3bd7fa1sm102164lfy.201.2023.05.08.14.20.19 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 May 2023 14:20:19 -0700 (PDT) From: Linus Walleij Date: Mon, 08 May 2023 23:20:08 +0200 Subject: [PATCH v4 3/4] ARM: omap1: Fix up the Nokia 770 board device IRQs MIME-Version: 1.0 Message-Id: <20230430-nokia770-regression-v4-3-9b6dc5536b17@linaro.org> References: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> In-Reply-To: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> To: Aaro Koskinen , Janusz Krzysztofik , Tony Lindgren , Russell King , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Thomas Bogendoerfer , Dmitry Torokhov , Mark Brown , Bartosz Golaszewski , Andreas Kemnade , Helge Deller , Ulf Hansson Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, linux-input@vger.kernel.org, linux-spi@vger.kernel.org, linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-mmc@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.1 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org The platform devices on the Nokia 770 is using some board-specific IRQs that get statically assigned to platform devices in the boardfile. This does not work with dynamic IRQ chip bases. Utilize the NULL device to define some board-specific GPIO lookups and use these to immediately look up the same GPIOs, convert to IRQ numbers and pass as resources to the devices. This is ugly but should work. Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Signed-off-by: Linus Walleij --- arch/arm/mach-omap1/board-nokia770.c | 57 ++++++++++++++++++++++++++++-------- 1 file changed, 44 insertions(+), 13 deletions(-) diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 218c928f71b3..8965df2c250d 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -6,7 +6,7 @@ */ #include #include -#include +#include #include #include #include @@ -250,19 +250,25 @@ static struct i2c_board_info nokia770_i2c_board_info_2[] __initdata = { static void __init nokia770_cbus_init(void) { - const int retu_irq_gpio = 62; - const int tahvo_irq_gpio = 40; - - if (gpio_request_one(retu_irq_gpio, GPIOF_IN, "Retu IRQ")) - return; - if (gpio_request_one(tahvo_irq_gpio, GPIOF_IN, "Tahvo IRQ")) { - gpio_free(retu_irq_gpio); - return; + struct gpio_desc *d; + int irq; + + d = gpiod_get(NULL, "retu_irq", GPIOD_IN); + if (IS_ERR(d)) { + pr_err("Unable to get CBUS Retu IRQ GPIO descriptor\n"); + } else { + irq = gpiod_to_irq(d); + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[0].irq = irq; + } + d = gpiod_get(NULL, "tahvo_irq", GPIOD_IN); + if (IS_ERR(d)) { + pr_err("Unable to get CBUS Tahvo IRQ GPIO descriptor\n"); + } else { + irq = gpiod_to_irq(d); + irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING); + nokia770_i2c_board_info_2[1].irq = irq; } - irq_set_irq_type(gpio_to_irq(retu_irq_gpio), IRQ_TYPE_EDGE_RISING); - irq_set_irq_type(gpio_to_irq(tahvo_irq_gpio), IRQ_TYPE_EDGE_RISING); - nokia770_i2c_board_info_2[0].irq = gpio_to_irq(retu_irq_gpio); - nokia770_i2c_board_info_2[1].irq = gpio_to_irq(tahvo_irq_gpio); i2c_register_board_info(2, nokia770_i2c_board_info_2, ARRAY_SIZE(nokia770_i2c_board_info_2)); device_create_managed_software_node(&nokia770_cbus_device.dev, @@ -275,8 +281,25 @@ static void __init nokia770_cbus_init(void) } #endif /* CONFIG_I2C_CBUS_GPIO */ +static struct gpiod_lookup_table nokia770_irq_gpio_table = { + .dev_id = NULL, + .table = { + /* GPIO used by SPI device 1 */ + GPIO_LOOKUP("gpio-0-15", 15, "ads7846_irq", + GPIO_ACTIVE_HIGH), + /* GPIO used for retu IRQ */ + GPIO_LOOKUP("gpio-48-63", 15, "retu_irq", + GPIO_ACTIVE_HIGH), + /* GPIO used for tahvo IRQ */ + GPIO_LOOKUP("gpio-32-47", 8, "tahvo_irq", + GPIO_ACTIVE_HIGH), + }, +}; + static void __init omap_nokia770_init(void) { + struct gpio_desc *d; + /* On Nokia 770, the SleepX signal is masked with an * MPUIO line by default. It has to be unmasked for it * to become functional */ @@ -288,6 +311,14 @@ static void __init omap_nokia770_init(void) software_node_register_node_group(nokia770_gpiochip_nodes); platform_add_devices(nokia770_devices, ARRAY_SIZE(nokia770_devices)); + + gpiod_add_lookup_table(&nokia770_irq_gpio_table); + d = gpiod_get(NULL, "ads7846_irq", GPIOD_IN); + if (IS_ERR(d)) + pr_err("Unable to get ADS7846 IRQ GPIO descriptor\n"); + else + nokia770_spi_board_info[1].irq = gpiod_to_irq(d); + spi_register_board_info(nokia770_spi_board_info, ARRAY_SIZE(nokia770_spi_board_info)); omap_serial_init(); From patchwork Mon May 8 21:20:09 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Linus Walleij X-Patchwork-Id: 680800 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DB4DCC7EE25 for ; Mon, 8 May 2023 21:20:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233912AbjEHVUn (ORCPT ); Mon, 8 May 2023 17:20:43 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59932 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233821AbjEHVUj (ORCPT ); Mon, 8 May 2023 17:20:39 -0400 Received: from mail-lf1-x136.google.com (mail-lf1-x136.google.com [IPv6:2a00:1450:4864:20::136]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5C85083D4 for ; Mon, 8 May 2023 14:20:23 -0700 (PDT) Received: by mail-lf1-x136.google.com with SMTP id 2adb3069b0e04-4f11d267d8bso5668718e87.2 for ; Mon, 08 May 2023 14:20:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1683580821; x=1686172821; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=At6naKZm43llnrS+PRA3z4g6G36SPwXH3KoMiA41EGY=; b=m6szLoANC/Gtyv38bXCLISYaLnW5vlsF/dJGDbfMjQA8xNRYvh5MhhDwCaj0LQy1C6 71ivsLE7rytcOReBolVM9eAOhT70qBtAb1ZL4HAzJEZRdYu1Pe/0djLtYDmYdMEGwP1y 33VqEUAmGw1k4+f5LKYH2INyHez9dk2Z9WqjRZ5ibez1RRdFtl2FFFthRuXwJf7ViLJs H4Lf3wX05mfs+UJIR/W9OmcgKULcTjck1WXnyniApteet46egah0HWS0nmYhd25+yOld L1KF0fvIyqIKYbWngldm/DevRmdl70i+FeiP/re3c0qeJ0ywRN4p7Ke6DBOewqlmMxgp rP3w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1683580821; x=1686172821; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=At6naKZm43llnrS+PRA3z4g6G36SPwXH3KoMiA41EGY=; b=gN2HbrkNandyRuj4lFUt32w0douG8MTeNxQ0jRGtSCm3brlZv6imLBaYhYmaxrgZrb R3296uib8QNNWE0NxN2Q0sjR0v7jrzHTHakbaquEp87a/UeXqJjMm82HZaO1yfLKwiJm FtHov8AmmmWjfVXkSIbcqkHaBaEF3t3efjfOjIIfdOHNFFdwy7OfR+pf73HDWU9KbKvW rb7/qOhpYzDt0Fb+W/r1wX9ItHJUKA+FK4TYcfXO6aF9v3xgRk4blD3a9tvPTatMK0vC kVLsjlaVHNtrs4fV+ag2KltB64gqYYB7IQ7zyynXLp/XYtLwoIM/POkoowGS6vzPbJSX QOSw== X-Gm-Message-State: AC+VfDwfNLKFB1ucrsHHjNtrCaOxvVOMIRAmLKZ7SRufW0O4YhQaarCo 7G9fq1ty1l2m7fZT7dMHb0OwtQ== X-Google-Smtp-Source: ACHHUZ6f0YxldyYYY+NP6Xi33YaOtWU2TSzAo1gjiwNA0CASbU+E9uch7we8DEeyNupjq53+3SZymw== X-Received: by 2002:ac2:4102:0:b0:4f1:4cdc:ec03 with SMTP id b2-20020ac24102000000b004f14cdcec03mr128495lfi.18.1683580821313; Mon, 08 May 2023 14:20:21 -0700 (PDT) Received: from [127.0.1.1] ([85.235.12.238]) by smtp.gmail.com with ESMTPSA id 4-20020ac24844000000b004edc3bd7fa1sm102164lfy.201.2023.05.08.14.20.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 08 May 2023 14:20:20 -0700 (PDT) From: Linus Walleij Date: Mon, 08 May 2023 23:20:09 +0200 Subject: [PATCH v4 4/4] ARM: dts: Fix erroneous ADS touchscreen polarities MIME-Version: 1.0 Message-Id: <20230430-nokia770-regression-v4-4-9b6dc5536b17@linaro.org> References: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> In-Reply-To: <20230430-nokia770-regression-v4-0-9b6dc5536b17@linaro.org> To: Aaro Koskinen , Janusz Krzysztofik , Tony Lindgren , Russell King , Daniel Mack , Haojian Zhuang , Robert Jarzmik , Thomas Bogendoerfer , Dmitry Torokhov , Mark Brown , Bartosz Golaszewski , Andreas Kemnade , Helge Deller , Ulf Hansson Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-mips@vger.kernel.org, linux-input@vger.kernel.org, linux-spi@vger.kernel.org, linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-mmc@vger.kernel.org, Linus Walleij X-Mailer: b4 0.12.1 Precedence: bulk List-ID: X-Mailing-List: linux-omap@vger.kernel.org Several device tree files get the polarity of the pendown-gpios wrong: this signal is active low. Fix up all incorrect flags, so that operating systems can rely on the flag being correctly set. Signed-off-by: Linus Walleij --- ChangeLog ->v4 - New patch as issue was pointed out by Dmitry. Can be merged separately. --- arch/arm/boot/dts/am57xx-cl-som-am57x.dts | 2 +- arch/arm/boot/dts/at91sam9261ek.dts | 2 +- arch/arm/boot/dts/imx7d-pico-hobbit.dts | 2 +- arch/arm/boot/dts/imx7d-sdb.dts | 2 +- arch/arm/boot/dts/omap3-cm-t3x.dtsi | 2 +- arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi | 2 +- arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi | 2 +- arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi | 2 +- arch/arm/boot/dts/omap3-pandora-common.dtsi | 2 +- arch/arm/boot/dts/omap5-cm-t54.dts | 2 +- 11 files changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts index 2fc9a5d5e0c0..625b9b311b49 100644 --- a/arch/arm/boot/dts/am57xx-cl-som-am57x.dts +++ b/arch/arm/boot/dts/am57xx-cl-som-am57x.dts @@ -527,7 +527,7 @@ touchscreen@1 { interrupt-parent = <&gpio1>; interrupts = <31 0>; - pendown-gpio = <&gpio1 31 0>; + pendown-gpio = <&gpio1 31 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index 88869ca874d1..045cb253f23a 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -156,7 +156,7 @@ tsc2046@2 { compatible = "ti,ads7843"; interrupts-extended = <&pioC 2 IRQ_TYPE_EDGE_BOTH>; spi-max-frequency = <3000000>; - pendown-gpio = <&pioC 2 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&pioC 2 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <150>; ti,x-max = /bits/ 16 <3830>; diff --git a/arch/arm/boot/dts/imx7d-pico-hobbit.dts b/arch/arm/boot/dts/imx7d-pico-hobbit.dts index d917dc4f2f22..6ad39dca7009 100644 --- a/arch/arm/boot/dts/imx7d-pico-hobbit.dts +++ b/arch/arm/boot/dts/imx7d-pico-hobbit.dts @@ -64,7 +64,7 @@ ads7846@0 { interrupt-parent = <&gpio2>; interrupts = <7 0>; spi-max-frequency = <1000000>; - pendown-gpio = <&gpio2 7 0>; + pendown-gpio = <&gpio2 7 GPIO_ACTIVE_LOW>; vcc-supply = <®_3p3v>; ti,x-min = /bits/ 16 <0>; ti,x-max = /bits/ 16 <4095>; diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts index f483bc0afe5e..234e5fc647b2 100644 --- a/arch/arm/boot/dts/imx7d-sdb.dts +++ b/arch/arm/boot/dts/imx7d-sdb.dts @@ -205,7 +205,7 @@ tsc2046@0 { pinctrl-0 = <&pinctrl_tsc2046_pendown>; interrupt-parent = <&gpio2>; interrupts = <29 0>; - pendown-gpio = <&gpio2 29 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; touchscreen-max-pressure = <255>; wakeup-source; }; diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi index e61b8a2bfb7d..51baedf1603b 100644 --- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi +++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi @@ -227,7 +227,7 @@ ads7846@0 { interrupt-parent = <&gpio2>; interrupts = <25 0>; /* gpio_57 */ - pendown-gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio2 25 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi index 3decc2d78a6c..a7f99ae0c1fe 100644 --- a/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi +++ b/arch/arm/boot/dts/omap3-devkit8000-lcd-common.dtsi @@ -54,7 +54,7 @@ ads7846@0 { interrupt-parent = <&gpio1>; interrupts = <27 0>; /* gpio_27 */ - pendown-gpio = <&gpio1 27 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 27 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi index c595afe4181d..d310b5c7bac3 100644 --- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi +++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi @@ -311,7 +311,7 @@ tsc2046@0 { interrupt-parent = <&gpio1>; interrupts = <8 0>; /* boot6 / gpio_8 */ spi-max-frequency = <1000000>; - pendown-gpio = <&gpio1 8 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 8 GPIO_ACTIVE_LOW>; vcc-supply = <®_vcc3>; pinctrl-names = "default"; pinctrl-0 = <&tsc2048_pins>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 1d6e88f99eb3..c3570acc35fa 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -149,7 +149,7 @@ ads7846@0 { interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi index 7e30f9d45790..d95a0e130058 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd43.dtsi @@ -160,7 +160,7 @@ ads7846@0 { interrupt-parent = <&gpio4>; interrupts = <18 0>; /* gpio_114 */ - pendown-gpio = <&gpio4 18 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio4 18 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>; ti,x-max = /bits/ 16 <0x0fff>; diff --git a/arch/arm/boot/dts/omap3-pandora-common.dtsi b/arch/arm/boot/dts/omap3-pandora-common.dtsi index 559853764487..4c3b6bab179c 100644 --- a/arch/arm/boot/dts/omap3-pandora-common.dtsi +++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi @@ -651,7 +651,7 @@ tsc2046@0 { pinctrl-0 = <&penirq_pins>; interrupt-parent = <&gpio3>; interrupts = <30 IRQ_TYPE_NONE>; /* GPIO_94 */ - pendown-gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio3 30 GPIO_ACTIVE_LOW>; vcc-supply = <&vaux4>; ti,x-min = /bits/ 16 <0>; diff --git a/arch/arm/boot/dts/omap5-cm-t54.dts b/arch/arm/boot/dts/omap5-cm-t54.dts index 2d87b9fc230e..af288d63a26a 100644 --- a/arch/arm/boot/dts/omap5-cm-t54.dts +++ b/arch/arm/boot/dts/omap5-cm-t54.dts @@ -354,7 +354,7 @@ ads7846@0 { interrupt-parent = <&gpio1>; interrupts = <15 0>; /* gpio1_wk15 */ - pendown-gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + pendown-gpio = <&gpio1 15 GPIO_ACTIVE_LOW>; ti,x-min = /bits/ 16 <0x0>;