From patchwork Mon May 1 14:34:39 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 678331 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D13DDC77B61 for ; Mon, 1 May 2023 14:36:01 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232580AbjEAOgA (ORCPT ); Mon, 1 May 2023 10:36:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46994 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232557AbjEAOf4 (ORCPT ); Mon, 1 May 2023 10:35:56 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id B9EFF10D8; Mon, 1 May 2023 07:35:47 -0700 (PDT) Received: from pps.filterd (m0279872.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 341Depu7000803; Mon, 1 May 2023 14:35:22 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=XFJuBPrmx95abh1S7SCQciIy/cR4x26RJM+o00++sI8=; b=gOISlIkqLEYG4xscsSBlVLlQYHOjBUfhYm4AO485DgWWZQdcwyKKlWsBC41l39OKhFyI 4WzDQFSzApJUxgxHZNjhBkuElW5RN9T4yCZVyDVH1BF1NIU38uTl71mg5+XRy8xWgTlO Fbd6Aenivom88HZ3TQWvlZSuz2fR5JlsBKa+ROvehkbhGYg1PLs/6+bjCQuIRqJZNFDp 3V9iBVC+lw1UOXWUz6RlwPU/nSbI2eWTppzolaeplJIHgrkOxgHoc9YXTkhhUIpRyEUz KHRxpgBj9kphc7kkBFSC11LvMjSLsOaau9ZBScc8u2oqgMQkjM5pgLoT77wYEUFmU62j ug== Received: from nalasppmta05.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3q8umg3p02-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 01 May 2023 14:35:21 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA05.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 341EZKxx012022 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 1 May 2023 14:35:20 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Mon, 1 May 2023 07:35:14 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v7 3/9] usb: dwc3: core: Access XHCI address space temporarily to read port info Date: Mon, 1 May 2023 20:04:39 +0530 Message-ID: <20230501143445.3851-4-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230501143445.3851-1-quic_kriskura@quicinc.com> References: <20230501143445.3851-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: 17G3dX379_eFQqfIaZcj1wguVNQx082S X-Proofpoint-ORIG-GUID: 17G3dX379_eFQqfIaZcj1wguVNQx082S X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-01_07,2023-04-27_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 phishscore=0 spamscore=0 impostorscore=0 mlxlogscore=999 mlxscore=0 adultscore=0 suspectscore=0 clxscore=1015 priorityscore=1501 malwarescore=0 bulkscore=0 lowpriorityscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305010115 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Currently host-only capable DWC3 controllers support Multiport. Temporarily map XHCI address space for host-only controllers and parse XHCI Extended Capabilities registers to read number of usb2 ports and usb3 ports present on multiport controller. Each USB Port is at least HS capable. The port info for usb2 and usb3 phy are identified as num_usb2_ports and num_usb3_ports. The intention is as follows: Wherever we need to perform phy operations like: LOOP_OVER_NUMBER_OF_AVAILABLE_PORTS() { phy_set_mode(dwc->usb2_generic_phy[i], PHY_MODE_USB_HOST); phy_set_mode(dwc->usb3_generic_phy[i], PHY_MODE_USB_HOST); } If number of usb2 ports is 3, loop can go from index 0-2 for usb2_generic_phy. If number of usb3-ports is 2, we don't know for sure, if the first 2 ports are SS capable or some other ports like (2 and 3) are SS capable. So instead, num_usb2_ports is used to loop around all phy's (both hs and ss) for performing phy operations. If any usb3_generic_phy turns out to be NULL, phy operation just bails out. num_usb3_ports is used to modify GUSB3PIPECTL registers while setting up phy's as we need to know how many SS capable ports are there for this. Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/core.c | 68 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/dwc3/core.h | 58 +++++++++++++++++++++++++++++++++++ 2 files changed, 126 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 0beaab932e7d..b8ac7bcee391 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1767,6 +1767,59 @@ static int dwc3_get_clocks(struct dwc3 *dwc) return 0; } +static int dwc3_read_port_info(struct dwc3 *dwc) +{ + void __iomem *regs; + u32 offset; + u32 temp; + u8 major_revision; + int ret = 0; + + /* + * Remap xHCI address space to access XHCI ext cap regs, + * since it is needed to get port info. + */ + regs = ioremap(dwc->xhci_resources[0].start, + resource_size(&dwc->xhci_resources[0])); + if (IS_ERR(regs)) + return PTR_ERR(regs); + + offset = dwc3_xhci_find_next_ext_cap(regs, 0, + XHCI_EXT_CAPS_PROTOCOL); + while (offset) { + temp = readl(regs + offset); + major_revision = XHCI_EXT_PORT_MAJOR(temp); + + temp = readl(regs + offset + 0x08); + if (major_revision == 0x03) { + dwc->num_usb3_ports += XHCI_EXT_PORT_COUNT(temp); + } else if (major_revision <= 0x02) { + dwc->num_usb2_ports += XHCI_EXT_PORT_COUNT(temp); + } else { + dev_err(dwc->dev, "port revision seems wrong\n"); + ret = -EINVAL; + goto unmap_reg; + } + + offset = dwc3_xhci_find_next_ext_cap(regs, offset, + XHCI_EXT_CAPS_PROTOCOL); + } + + temp = readl(regs + DWC3_XHCI_HCSPARAMS1); + if (HCS_MAX_PORTS(temp) != (dwc->num_usb3_ports + dwc->num_usb2_ports)) { + dev_err(dwc->dev, "inconsistency in port info\n"); + ret = -EINVAL; + goto unmap_reg; + } + + dev_dbg(dwc->dev, + "hs-ports: %d ss-ports: %d\n", dwc->num_usb2_ports, dwc->num_usb3_ports); + +unmap_reg: + iounmap(regs); + return ret; +} + static int dwc3_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -1774,6 +1827,7 @@ static int dwc3_probe(struct platform_device *pdev) void __iomem *regs; struct dwc3 *dwc; int ret; + unsigned int hw_mode; dwc = devm_kzalloc(dev, sizeof(*dwc), GFP_KERNEL); if (!dwc) @@ -1843,6 +1897,20 @@ static int dwc3_probe(struct platform_device *pdev) goto err_disable_clks; } + /* + * Currently DWC3 controllers that are host-only capable + * support Multiport + */ + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_read_port_info(dwc); + if (ret) + goto err_disable_clks; + } else { + dwc->num_usb2_ports = 1; + dwc->num_usb3_ports = 1; + } + spin_lock_init(&dwc->lock); mutex_init(&dwc->mutex); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index d56457c02996..21312703e053 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -35,6 +35,17 @@ #define DWC3_MSG_MAX 500 +/* Define XHCI Extcap register offsets for getting multiport info */ +#define XHCI_HCC_PARAMS_OFFSET 0x10 +#define DWC3_XHCI_HCSPARAMS1 0x04 +#define XHCI_EXT_CAPS_PROTOCOL 2 +#define XHCI_HCC_EXT_CAPS(x) (((x) >> 16) & 0xffff) +#define XHCI_EXT_CAPS_ID(x) (((x) >> 0) & 0xff) +#define XHCI_EXT_CAPS_NEXT(x) (((x) >> 8) & 0xff) +#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff) +#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff) +#define HCS_MAX_PORTS(x) (((x) >> 24) & 0x7f) + /* Global constants */ #define DWC3_PULL_UP_TIMEOUT 500 /* ms */ #define DWC3_BOUNCE_SIZE 1024 /* size of a superspeed bulk */ @@ -1025,6 +1036,8 @@ struct dwc3_scratchpad_array { * @usb_psy: pointer to power supply interface. * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY + * @num_usb2_ports: number of usb2 ports. + * @num_usb3_ports: number of usb3 ports. * @usb2_generic_phy: pointer to USB2 PHY * @usb3_generic_phy: pointer to USB3 PHY * @phys_ready: flag to indicate that PHYs are ready @@ -1162,6 +1175,9 @@ struct dwc3 { struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; + u32 num_usb2_ports; + u32 num_usb3_ports; + struct phy *usb2_generic_phy; struct phy *usb3_generic_phy; @@ -1650,4 +1666,46 @@ static inline void dwc3_ulpi_exit(struct dwc3 *dwc) { } #endif +/** + * dwc3_xhci_find_next_ext_cap - Find the offset of the extended capabilities + * with capability ID id. + * + * @base PCI MMIO registers base address. + * @start address at which to start looking, (0 or HCC_PARAMS to start at + * beginning of list) + * @id Extended capability ID to search for, or 0 for the next + * capability + * + * Returns the offset of the next matching extended capability structure. + * Some capabilities can occur several times, e.g., the XHCI_EXT_CAPS_PROTOCOL, + * and this provides a way to find them all. + */ +static inline int dwc3_xhci_find_next_ext_cap(void __iomem *base, u32 start, int id) +{ + u32 val; + u32 next; + u32 offset; + + offset = start; + if (!start || start == XHCI_HCC_PARAMS_OFFSET) { + val = readl(base + XHCI_HCC_PARAMS_OFFSET); + if (val == ~0) + return 0; + offset = XHCI_HCC_EXT_CAPS(val) << 2; + if (!offset) + return 0; + } + do { + val = readl(base + offset); + if (val == ~0) + return 0; + if (offset != start && (id == 0 || XHCI_EXT_CAPS_ID(val) == id)) + return offset; + + next = XHCI_EXT_CAPS_NEXT(val); + offset += next << 2; + } while (next); + + return 0; +} #endif /* __DRIVERS_USB_DWC3_CORE_H */ From patchwork Mon May 1 14:34:40 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 678332 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 425E7C77B7F for ; Mon, 1 May 2023 14:35:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232511AbjEAOfr (ORCPT ); Mon, 1 May 2023 10:35:47 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:46600 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229556AbjEAOfo (ORCPT ); Mon, 1 May 2023 10:35:44 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8E4651707; Mon, 1 May 2023 07:35:43 -0700 (PDT) Received: from pps.filterd (m0279862.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 341EHJm4028582; Mon, 1 May 2023 14:35:28 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=SHJpOQOaDQimrpDNKLc96uJyDLYS5uU5n2YMSTNQvrg=; b=p6QWS1JL7Y74r1KoC7ZFCxmZ/O/0bPiz/vI6TdkvGGV3zggIrwg9HvMQBZ+cNTswBpvf ov/DPIhsk46oUnbIum8YiTcFii0gbxBahcGEL2wWjZKRzDiTiswZzjI/qDBHTi2U93VU XbFF4E0WHGOyXsnWAJ2qBD7CeYBcDjI7T+CKSkOPhmo2CT3eQD1UwUn/LdAJyYYsNEi9 vJaGg8IVoZ/cyLw1wiH870LIW9pj0fI+BhrJONb2CEPsbD8ColQMlgf9wyNqG74NlNcM 97pWIv0XkVa1ehrogtKOQMemxhT7GxP9LmXtYOnFEow0nHHjVxEwrKV4GpqsMigH3Eyv ew== Received: from nalasppmta03.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3q8v0rukw9-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 01 May 2023 14:35:27 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 341EZQJA015913 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 1 May 2023 14:35:26 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Mon, 1 May 2023 07:35:20 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v7 4/9] usb: dwc3: core: Skip setting event buffers for host only controllers Date: Mon, 1 May 2023 20:04:40 +0530 Message-ID: <20230501143445.3851-5-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230501143445.3851-1-quic_kriskura@quicinc.com> References: <20230501143445.3851-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: -_WjZryAEt_KX7j76HGaEwC_HHoYfZDJ X-Proofpoint-ORIG-GUID: -_WjZryAEt_KX7j76HGaEwC_HHoYfZDJ X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-01_08,2023-04-27_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxlogscore=957 suspectscore=0 adultscore=0 bulkscore=0 priorityscore=1501 clxscore=1015 mlxscore=0 spamscore=0 impostorscore=0 phishscore=0 lowpriorityscore=0 malwarescore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305010117 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org On some SoC's like SA8295P where the tertiary controller is host-only capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible. Trying to setup them up during core_init leads to a crash. For DRD/Peripheral supported controllers, event buffer setup is done again in gadget_pullup. Skip setup or cleanup of event buffers if controller is host-only capable. Signed-off-by: Krishna Kurapati --- drivers/usb/dwc3/core.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index b8ac7bcee391..8625fc5c7ab4 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -835,7 +835,12 @@ static void dwc3_clk_disable(struct dwc3 *dwc) static void dwc3_core_exit(struct dwc3 *dwc) { - dwc3_event_buffers_cleanup(dwc); + unsigned int hw_mode; + + hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0); + if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) + dwc3_event_buffers_cleanup(dwc); + dwc3_phy_power_off(dwc); dwc3_phy_exit(dwc); dwc3_clk_disable(dwc); @@ -1141,10 +1146,12 @@ static int dwc3_core_init(struct dwc3 *dwc) if (ret) goto err_exit_phy; - ret = dwc3_event_buffers_setup(dwc); - if (ret) { - dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err_power_off_phy; + if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) { + ret = dwc3_event_buffers_setup(dwc); + if (ret) { + dev_err(dwc->dev, "failed to setup event buffers\n"); + goto err_power_off_phy; + } } /* @@ -1958,7 +1965,10 @@ static int dwc3_probe(struct platform_device *pdev) err_exit_debugfs: dwc3_debugfs_exit(dwc); - dwc3_event_buffers_cleanup(dwc); + + if (hw_mode != DWC3_GHWPARAMS0_MODE_HOST) + dwc3_event_buffers_cleanup(dwc); + dwc3_phy_power_off(dwc); dwc3_phy_exit(dwc); dwc3_ulpi_exit(dwc); From patchwork Mon May 1 14:34:43 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 678330 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C301AC77B73 for ; Mon, 1 May 2023 14:36:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232561AbjEAOgn (ORCPT ); Mon, 1 May 2023 10:36:43 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:47850 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229679AbjEAOgl (ORCPT ); Mon, 1 May 2023 10:36:41 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 051931711; Mon, 1 May 2023 07:36:17 -0700 (PDT) Received: from pps.filterd (m0279867.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 341Cr0lO001429; Mon, 1 May 2023 14:35:47 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=YaySEyQ398Lpa/HPI4dn7Um6ZX465c14s2T4qHTfE1w=; b=JSYKLwltNI1Xw5F14833tqiKa5ilaisk0MBcm2QSopr2qHtmQCdPLoyhLMt4cIqctgEO rIQ2hntTXLnVtnq/mCQCjoAnDQ7yWbUAq3bSn8DlTJGU519dw1eSXOUVMm0ujHmG8J7Y aU79C1MYlCffXGa2Ew7eHsB/0V92dnLISYkLp7uJ5KTpcb6rA6cUMPI7xtZgqe4ru66r durCVrKCDVz56Y7Q0LuSGxndVBQ2zx4Qd4tZcgyr3wLgm40Wl/0Lm8yP0X7IgihFpgYS 8L1B+BTsbCs/ATtkCRStNToAqLB3gk6gLr2PsxmLq0+IbZ3ymqb6jE5lSmQaSagZbLDh ig== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3qa0a397yv-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 01 May 2023 14:35:47 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 341EZkOG003782 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 1 May 2023 14:35:46 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Mon, 1 May 2023 07:35:39 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v7 7/9] arm64: dts: qcom: sc8280xp: Add multiport controller node for SC8280 Date: Mon, 1 May 2023 20:04:43 +0530 Message-ID: <20230501143445.3851-8-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230501143445.3851-1-quic_kriskura@quicinc.com> References: <20230501143445.3851-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-ORIG-GUID: _UAJfHySvam17Re-civGWWs8a9P0sFmR X-Proofpoint-GUID: _UAJfHySvam17Re-civGWWs8a9P0sFmR X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-01_08,2023-04-27_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 clxscore=1015 priorityscore=1501 bulkscore=0 impostorscore=0 lowpriorityscore=0 mlxlogscore=999 mlxscore=0 adultscore=0 phishscore=0 malwarescore=0 spamscore=0 suspectscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305010117 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org Add USB and DWC3 node for tertiary port of SC8280 along with multiport IRQ's and phy's. This will be used as a base for SA8295P and SA8295-Ride platforms. Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 64 ++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi index 8fa9fbfe5d00..0e4fb286956b 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi @@ -3133,6 +3133,70 @@ usb_1_role_switch: endpoint { }; }; + usb_2: usb@a4f8800 { + compatible = "qcom,sc8280xp-dwc3-mp", "qcom,dwc3"; + reg = <0 0x0a4f8800 0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_MP_AXI_CLK>, + <&gcc GCC_USB30_MP_SLEEP_CLK>, + <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_NORTH_AXI_CLK>, + <&gcc GCC_AGGRE_USB_NOC_SOUTH_AXI_CLK>, + <&gcc GCC_SYS_NOC_USB_AXI_CLK>; + clock-names = "cfg_noc", "core", "iface", "sleep", "mock_utmi", + "noc_aggr", "noc_aggr_north", "noc_aggr_south", "noc_sys"; + + assigned-clocks = <&gcc GCC_USB30_MP_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_MP_MASTER_CLK>; + assigned-clock-rates = <19200000>, <200000000>; + + interrupts-extended = <&pdc 127 IRQ_TYPE_EDGE_RISING>, + <&pdc 126 IRQ_TYPE_EDGE_RISING>, + <&pdc 16 IRQ_TYPE_LEVEL_HIGH>, + , + , + , + ; + + interrupt-names = "dp_hs_phy_irq", "dm_hs_phy_irq", + "ss_phy_irq", "pwr_event_1", + "pwr_event_2", "pwr_event_3", + "pwr_event_4"; + + power-domains = <&gcc USB30_MP_GDSC>; + + resets = <&gcc GCC_USB30_MP_BCR>; + + interconnects = <&aggre1_noc MASTER_USB3_1 0 &mc_virt SLAVE_EBI1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_1 0>; + interconnect-names = "usb-ddr", "apps-usb"; + + required-opps = <&rpmhpd_opp_nom>; + + status = "disabled"; + + usb_2_dwc3: usb@a400000 { + compatible = "snps,dwc3"; + reg = <0 0x0a400000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x800 0x0>; + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>, + <&usb_2_hsphy1>, <&usb_2_qmpphy1>, + <&usb_2_hsphy2>, + <&usb_2_hsphy3>; + phy-names = "usb2-port0", "usb3-port0", + "usb2-port1", "usb3-port1", + "usb2-port2", + "usb2-port3"; + }; + }; + mdss0: display-subsystem@ae00000 { compatible = "qcom,sc8280xp-mdss"; reg = <0 0x0ae00000 0 0x1000>; From patchwork Mon May 1 14:34:45 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krishna Kurapati X-Patchwork-Id: 678329 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9ADF1C77B7F for ; Mon, 1 May 2023 14:37:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232292AbjEAOh5 (ORCPT ); Mon, 1 May 2023 10:37:57 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:49432 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231249AbjEAOh4 (ORCPT ); Mon, 1 May 2023 10:37:56 -0400 Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id A7C921728; Mon, 1 May 2023 07:37:23 -0700 (PDT) Received: from pps.filterd (m0279866.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 341CnDCf013917; Mon, 1 May 2023 14:36:00 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=qcppdkim1; bh=Abuns1dscIhsXqDWAq+7t0Pta40GkCpQ9StWLfQ64cg=; b=R6ZVOIVGD65EoofKVbsive0yvO0gnsok/OFVVuTcAmIjlh0GlqwPRZAEZRAffK9fgZnQ PkYDu7QRRhhf7l5hzDLulUJYlanuxFTVMngUmbIDDg+m3MMJNeIjGJSnnFOdcw3NVyjX uYp/wZ4Y9rY7TYMEXRvg3AI7CS9Q2wax36MiF19QzvwfRVJzeGDpJc/owwBRKc015Ipi luQGd373skX9ccRspFWj8+LZkFncw1LYpjXDn29ti7upLVGcwv1oTQT/sf2DPyqELPoG cIDUKP6FafK+AuHPnfC4CG5KiH6bbQ2F6dwbxSPtBJYOp1CLp+cFmhnZ8kyVagqBUyM4 jA== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3q8vhgum0y-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 01 May 2023 14:35:59 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 341EZxhQ003882 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Mon, 1 May 2023 14:35:59 GMT Received: from hu-kriskura-hyd.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Mon, 1 May 2023 07:35:52 -0700 From: Krishna Kurapati To: Thinh Nguyen , Greg Kroah-Hartman , Philipp Zabel , "Andy Gross" , Bjorn Andersson , "Konrad Dybcio" , Rob Herring , Krzysztof Kozlowski , Felipe Balbi , Wesley Cheng CC: , , , , , , , , , , Krishna Kurapati Subject: [PATCH v7 9/9] arm64: dts: qcom: sa8540-ride: Enable first port of tertiary usb controller Date: Mon, 1 May 2023 20:04:45 +0530 Message-ID: <20230501143445.3851-10-quic_kriskura@quicinc.com> X-Mailer: git-send-email 2.40.0 In-Reply-To: <20230501143445.3851-1-quic_kriskura@quicinc.com> References: <20230501143445.3851-1-quic_kriskura@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01b.na.qualcomm.com (10.46.141.250) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: zPnTMxNKC6n4oQsTRTS7hvLOOieuvYbW X-Proofpoint-ORIG-GUID: zPnTMxNKC6n4oQsTRTS7hvLOOieuvYbW X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.942,Hydra:6.0.573,FMLib:17.11.170.22 definitions=2023-05-01_08,2023-04-27_01,2023-02-09_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 impostorscore=0 suspectscore=0 phishscore=0 mlxscore=0 bulkscore=0 malwarescore=0 mlxlogscore=933 adultscore=0 lowpriorityscore=0 priorityscore=1501 clxscore=1015 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2303200000 definitions=main-2305010117 Precedence: bulk List-ID: X-Mailing-List: linux-usb@vger.kernel.org There is now support for the multiport USB controller this uses so enable it. The board only has a single port hooked up (despite it being wired up to the multiport IP on the SoC). There's also a USB 2.0 mux hooked up, which by default on boot is selected to mux properly. Grab the gpio controlling that and ensure it stays in the right position so USB 2.0 continues to be routed from the external port to the SoC. Signed-off-by: Andrew Halaney Signed-off-by: Krishna Kurapati --- arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts index 24fa449d48a6..53d47593306e 100644 --- a/arch/arm64/boot/dts/qcom/sa8540p-ride.dts +++ b/arch/arm64/boot/dts/qcom/sa8540p-ride.dts @@ -309,6 +309,19 @@ &usb_2_qmpphy0 { status = "okay"; }; +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + phy-names = "usb2-port0", "usb3-port0"; + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>; +}; + &xo_board_clk { clock-frequency = <38400000>; }; @@ -401,4 +414,13 @@ wake-pins { bias-pull-up; }; }; + + usb2_en_state: usb2-en-state { + /* TS3USB221A USB2.0 mux select */ + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; };