From patchwork Tue Apr 18 09:54:41 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 676941 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 77FA4C77B71 for ; Tue, 18 Apr 2023 09:56:43 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 3667AE76; Tue, 18 Apr 2023 11:55:51 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 3667AE76 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1681811801; bh=qLHMWJLy5LkqLapCkIuDnzl6jL9e95hUVvQqzMFUygI=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=E+bE44zjIbgUpDKOSlo+qz2JAhzCYXsbt/u+qGsE9vzIXGLrxKpBCqmToBUM0jXA5 N+gzxkH/DqU8BzBu6XZ5WTwUL9ymVflUgdLUEoMUoh7VQHFGDrsvBYZePtd1EU5B7d SwW9t97HbsP0VvBsfq5DU0Flop0I0W24UH82EMeg= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id 24C51F80529; Tue, 18 Apr 2023 11:55:02 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 8E1FFF80155; Tue, 18 Apr 2023 11:54:56 +0200 (CEST) Received: from mail-ed1-x536.google.com (mail-ed1-x536.google.com [IPv6:2a00:1450:4864:20::536]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 66008F800AC for ; Tue, 18 Apr 2023 11:54:53 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 66008F800AC Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=RPWTOocd Received: by mail-ed1-x536.google.com with SMTP id 4fb4d7f45d1cf-5068e99960fso2554571a12.1 for ; Tue, 18 Apr 2023 02:54:53 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1681811691; x=1684403691; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=qQ8KevaU3QTxraZkfXWWkbBrnYMVguulcoi7GnzRXhI=; b=RPWTOocd+41sseJPEHA3IfI9DCZsYutqaxHBRwl1A6XNqRizzEsiS3XBM4oSfs28Fx zp3jXQscxLT9M2RbrTVwOuTrxQMYDyDX9f96fY/d72sqFtE2v0HyqeDmNLtRy49Qruj1 pQgr50Y2nblqGHR96iDIL+a0quDDrVSPI7gZw577X7tgFZD+NJxStQ2KrKH8zc8n6250 4erldJ7VJXMzt9vA+fR5s0Tr8r2lM7C+LTWYlQf4mDhdBFw2JItJx+P+rkzyswIJyQUN 1x2fo67hg2v/S/SLs7C8zjKy5bfBM+CIQf3P14jbCMFR+28KcV90S62OO11lMszpAudO Ob6A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681811691; x=1684403691; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qQ8KevaU3QTxraZkfXWWkbBrnYMVguulcoi7GnzRXhI=; b=RKDZTZfoghrMXONJjNaonDAh7ZhESIfpii0GqJkGy4mzs3rVH1bOzJ4VzA8a1vER7E wvRDHngwJxrBIDb2vHsXZaIudN3isKEEZQY1vk+QqnY4NbVkbYvqmpmFMG5m6ES5egbI DBu8kxnlLA210tz84f5wlZuGWI+EJ4DRtGE09gmKkxZ+qDJckxRCtjfet8Ro4SrVh5sf jXL0xaj7bT9pn9MO9Ghhz/XB2vxPOKAzTzq4gaMmFfTmJfp2wbxGiRPRYMlELErZQIla MtyVLQCApOzoIYHLDX1Q5aw6aAmjeuNUPkE1O0DjLkGnDva5tLTttmzV3if/HFbmbXKJ VU6Q== X-Gm-Message-State: AAQBX9dYRKZNP59kz4ZQWDvVY3sW/UG4OVkKozG4BmfBUdPFzeZp1jmL EeHn9yPNNwtozlmkRnZVnu0BaQ== X-Google-Smtp-Source: AKy350ZJ2akv/lhLAIvrIXntFS6VWUAwO+3l1rJios+Izhwxd25Sw7+kk5nrVxaPll2aNsOcEwv3Zw== X-Received: by 2002:aa7:c45a:0:b0:504:a2c8:ea60 with SMTP id n26-20020aa7c45a000000b00504a2c8ea60mr1740013edr.35.1681811691495; Tue, 18 Apr 2023 02:54:51 -0700 (PDT) Received: from krzk-bin.. ([2a02:810d:15c0:828:a276:7d35:5226:1c77]) by smtp.gmail.com with ESMTPSA id o4-20020a509b04000000b00504d04c939fsm7076578edi.59.2023.04.18.02.54.50 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:54:51 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Vinod Koul , Bard Liao , Pierre-Louis Bossart , Sanyog Kale , Srinivas Kandagatla , Rao Mandadapu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 1/7] dt-bindings: soundwire: qcom: add Qualcomm Soundwire v2.0.0 Date: Tue, 18 Apr 2023 11:54:41 +0200 Message-Id: <20230418095447.577001-2-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> References: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Message-ID-Hash: Y3ITWJA6EH55OIN3C4DPXG3ZQWWKGYRU X-Message-ID-Hash: Y3ITWJA6EH55OIN3C4DPXG3ZQWWKGYRU X-MailFrom: krzysztof.kozlowski@linaro.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: Krzysztof Kozlowski , Rob Herring X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: Add compatible for Qualcomm Soundwire v2.0.0 controller, which comes with several differences against v1.7.0 in register layout and more ports (thus increase maxItems of each port-related property to 16). Reviewed-by: Rob Herring Signed-off-by: Krzysztof Kozlowski --- Changes since v2: 1. Add tags. Changes since v1: 1. Increase maxItems to 16 for port-related properties. --- .../bindings/soundwire/qcom,soundwire.yaml | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index e4dba825ab11..98c7fc7e1189 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -21,6 +21,7 @@ properties: - qcom,soundwire-v1.5.1 - qcom,soundwire-v1.6.0 - qcom,soundwire-v1.7.0 + - qcom,soundwire-v2.0.0 reg: maxItems: 1 @@ -80,7 +81,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-sinterval-low: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -91,7 +92,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-offset1: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -102,7 +103,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-offset2: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -113,7 +114,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-lane-control: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -124,7 +125,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 qcom,ports-block-pack-mode: $ref: /schemas/types.yaml#/definitions/uint8-array @@ -137,7 +138,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 @@ -154,7 +155,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 @@ -171,7 +172,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 @@ -187,7 +188,7 @@ properties: or applicable for the respective data port. More info in MIPI Alliance SoundWire 1.0 Specifications. minItems: 3 - maxItems: 8 + maxItems: 16 items: oneOf: - minimum: 0 From patchwork Tue Apr 18 09:54:42 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 674537 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 1939FC77B71 for ; Tue, 18 Apr 2023 09:56:50 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id DC1FDE7F; Tue, 18 Apr 2023 11:55:57 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz DC1FDE7F DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1681811808; bh=SrPCHLxh7qn3Go4wMLkE4nKUTcQcgjRVkpavONMnGlc=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=Mo0qbFa5TZbeaBaG+Dgc8VSOhjHIEGW/3EJtnfIFVhkgoiXybxAzFo7Lx7p9BRtvA whimBhLIHB6nrhmgIrA7x2thtgtRDQlsUA3hqcmsZbDNAVQBClBDVSYySvZFwOfC5V 4jQzQ/I/CSo16l5WJN8QGwnU7+CnKmLvXHr+TDEQ= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id 727A3F8053D; Tue, 18 Apr 2023 11:55:05 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 2847CF8019B; Tue, 18 Apr 2023 11:54:58 +0200 (CEST) Received: from mail-ej1-x62d.google.com (mail-ej1-x62d.google.com [IPv6:2a00:1450:4864:20::62d]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id A04E0F800AC for ; Tue, 18 Apr 2023 11:54:55 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz A04E0F800AC Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=C2Gwbgl2 Received: by mail-ej1-x62d.google.com with SMTP id a640c23a62f3a-94a34a14a54so657834466b.1 for ; Tue, 18 Apr 2023 02:54:55 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1681811694; x=1684403694; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=9cRfuFeBQF2GhlfpWUoUKdpK75M5MnTFGf0plvdLi68=; b=C2Gwbgl2JvkR9/b/grjshd/C+6ox2w0XGOFuJ8S7JpFN4bzNJOp1pHVIwhuGq5bvNk r6ww0xJsSxXQ/fBjmaFjwHSYeyAr2Kxe2nsYa+wfmgUO1Dhm/nqVcVAdzN7WAMRFIqnk HrApMx7EoUZ5G+Sbj1jWkzhgaOa+WW2EDN4au6jh7qtSdE7wztjWdQaSwHAnQ4fB3qyT 3UPZ/rJ9vP3Q4tlbNI2otU85R5KO9GcKkglUggsMn4U2m8n20bE+/J4+LtRi3kPXC2y+ fZSJCKB31kPq0QvEC36AKly99YBANLOD3jFDXWlnRcxZ1AJ70yOCk13vXoGxLa3IOGCm Cf+w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681811694; x=1684403694; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=9cRfuFeBQF2GhlfpWUoUKdpK75M5MnTFGf0plvdLi68=; b=egUYWg8o6CD+59OVHPZoM7ThbJOd2Ee2OVWDb/3/4iBke+PjJwyAP+l+/C8nbQbZCC eo/eI75jiiNSAHZaAm7SiqkdcaiB+P19skGzZnb/Fq/OL/uZAB3XiV7fTBBMG3imp2vj 8R+yB8P6xgHMTfsCXHlclq1yRngvxBSu12OROUR0IQSzSzYXVARYwhiKLXxeGtD/hIgg 0V9+fjnl3WWCd+VGqTf5pGm2sZAyiIO4umGLy9RxdJEG2fnQ4VSvfjYUbI0YWtJUJtox q77dHoZKVf9JFExVmNJFMby1ODD5FPGPtRODoE3awRim6D23Gl2IZf58O2ArXFdw+b8T 8XSQ== X-Gm-Message-State: AAQBX9cX+mxTqfORHD/XoDaEmtfNqsJJAocxv4TiemLC3s1FqkXvf9MM qWNJEyMQsDD8RRTDCYj+3NK72A== X-Google-Smtp-Source: AKy350Zv4eAYzjlFPhmgQi9Le6Vg11S1iPenSSp/apV18vS/Di6QxTwegzV01A/ajeWBcJ+evGhJwQ== X-Received: by 2002:aa7:cb0d:0:b0:506:b120:8df2 with SMTP id s13-20020aa7cb0d000000b00506b1208df2mr1389396edt.12.1681811693399; Tue, 18 Apr 2023 02:54:53 -0700 (PDT) Received: from krzk-bin.. ([2a02:810d:15c0:828:a276:7d35:5226:1c77]) by smtp.gmail.com with ESMTPSA id o4-20020a509b04000000b00504d04c939fsm7076578edi.59.2023.04.18.02.54.51 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:54:53 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Vinod Koul , Bard Liao , Pierre-Louis Bossart , Sanyog Kale , Srinivas Kandagatla , Rao Mandadapu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 2/7] dt-bindings: soundwire: qcom: add 16-bit sample interval Date: Tue, 18 Apr 2023 11:54:42 +0200 Message-Id: <20230418095447.577001-3-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> References: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Message-ID-Hash: 2NBQF3AC52634PSN57XXTJALGKT6MINY X-Message-ID-Hash: 2NBQF3AC52634PSN57XXTJALGKT6MINY X-MailFrom: krzysztof.kozlowski@linaro.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: Krzysztof Kozlowski , Rob Herring X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals. Reviewed-by: Rob Herring Signed-off-by: Krzysztof Kozlowski Reviewed-by: Srinivas Kandagatla --- Changes since v2: 1. Use uint16 for qcom,ports-sinterval. DTS will be fixed in separate patchset. 2. Add tags. --- .../bindings/soundwire/qcom,soundwire.yaml | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml index 98c7fc7e1189..fb44b89a754e 100644 --- a/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml +++ b/Documentation/devicetree/bindings/soundwire/qcom,soundwire.yaml @@ -86,7 +86,7 @@ properties: qcom,ports-sinterval-low: $ref: /schemas/types.yaml#/definitions/uint8-array description: - Sample interval low of each data port. + Sample interval (only lowest byte) of each data port. Out ports followed by In ports. Used for Sample Interval calculation. Value of 0xff indicates that this option is not implemented or applicable for the respective data port. @@ -94,6 +94,17 @@ properties: minItems: 3 maxItems: 16 + qcom,ports-sinterval: + $ref: /schemas/types.yaml#/definitions/uint16-array + description: + Sample interval of each data port. + Out ports followed by In ports. Used for Sample Interval calculation. + Value of 0xffff indicates that this option is not implemented + or applicable for the respective data port. + More info in MIPI Alliance SoundWire 1.0 Specifications. + minItems: 3 + maxItems: 16 + qcom,ports-offset1: $ref: /schemas/types.yaml#/definitions/uint8-array description: @@ -220,10 +231,15 @@ required: - '#size-cells' - qcom,dout-ports - qcom,din-ports - - qcom,ports-sinterval-low - qcom,ports-offset1 - qcom,ports-offset2 +oneOf: + - required: + - qcom,ports-sinterval-low + - required: + - qcom,ports-sinterval + additionalProperties: false examples: From patchwork Tue Apr 18 09:54:43 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 676940 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 7122AC77B71 for ; Tue, 18 Apr 2023 09:57:09 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 914B9E86; Tue, 18 Apr 2023 11:56:17 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 914B9E86 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1681811827; bh=4BH4eVwxV61SKo8rHzOWsqz657vT6caIQ/AuO3Y0bTA=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=b6JSg9znaqnU1AZm1saNgrN0E3HJt+zA9SvQSNdzyLbvAxvFSgZdwv7I+qzTOgxjb Q36OYed2Su3jfmynpHALx7bLpw31TSHyeGcfDYOYSNo0SrNV6u+FZFnMFBHhrBMjE5 nJXSNnUHydujGKZwkEWtm4dIE0bwpl/SORm/DT4Q= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id 3AF5DF800AC; Tue, 18 Apr 2023 11:55:06 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 916D1F800AC; Tue, 18 Apr 2023 11:54:59 +0200 (CEST) Received: from mail-ed1-x530.google.com (mail-ed1-x530.google.com [IPv6:2a00:1450:4864:20::530]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 9B848F80149 for ; Tue, 18 Apr 2023 11:54:56 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 9B848F80149 Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=YNvhtNpX Received: by mail-ed1-x530.google.com with SMTP id 4fb4d7f45d1cf-50674656309so3252567a12.0 for ; Tue, 18 Apr 2023 02:54:56 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1681811695; x=1684403695; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=qfWAoZVQpBV3Gs9h8tDUDYuiSFd4SRFgH0q6cAVKEJI=; b=YNvhtNpXqQkZcemTPd/COHdvCZyYbK+zFCNn8oTJJXRYm5bCxwn3U5IhmFsaGYd1B0 dO0nlkGuejs45aVRQt0qbkoQFXVrRUI6FKuBoumoCWQyQbMoW+wGvuGvdvJNzVrL/tEH nE/2bkaI0vjCfDVTP3NDh5raXsVnTbFBTkk7D2N19JRFfvcBgyL14H+zKszWv9Xg4dXi gutzCSkUNAVBC28HH6/JqPnya9vdY7PFpRHmoc8ZYSqkKSSOL13sD1IaM8Za7z6DuVSd 28FRG600y9/ovlcuzj3gfRd7q4i7r0/RIgoBU05UZOg3YKpIka07dHZZG6JT/2gpmYeg BEBg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681811695; x=1684403695; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=qfWAoZVQpBV3Gs9h8tDUDYuiSFd4SRFgH0q6cAVKEJI=; b=Yp4aBI15T+XKjDNdSMzArL6qcCD3UUE7QfGgR0n5PCKmXlxfeTdUIVcxqXEaflNQRP 8XwWJ8tC62LuTJyuAL/vqMFON0D/6WLPxr1EaJzFUdX6OHrRrLIDRAP2ezK7ZVHTg3DX o9kcvqYYdsBVFTt75ZdWTVYA0N1MAyiw/HoLAEji9N93d2VMo237+6AhnBPkQSTyZi3j z54aB97DsHBaEfbp0Wfd/imEmDZQzS85e2NESUMV3G2ilgeOz239Ljqlz5OYPyKPoHs+ ZZKYMzUa24T3DGKwrMTt3xLaAnY/81iAZCTSshVpdcv52hWbE7AQlreH/Oa+TduB//BN 2D9Q== X-Gm-Message-State: AAQBX9eAk5Md30xlAXMqOCfDPg782J+gKPbDEi9Mz/LK03FxwZMCkyql j/m2LNPM8fuamM+MqUwgtLc9lg== X-Google-Smtp-Source: AKy350aZ4LDO4RZEyTrHTwlvzkSTENrz5Ws/13ACngYxLItJ6NOLjqayqpUrqLaP16zxdw54lHhZsw== X-Received: by 2002:a05:6402:12d4:b0:505:745:a271 with SMTP id k20-20020a05640212d400b005050745a271mr1783992edx.23.1681811694858; Tue, 18 Apr 2023 02:54:54 -0700 (PDT) Received: from krzk-bin.. ([2a02:810d:15c0:828:a276:7d35:5226:1c77]) by smtp.gmail.com with ESMTPSA id o4-20020a509b04000000b00504d04c939fsm7076578edi.59.2023.04.18.02.54.53 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:54:54 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Vinod Koul , Bard Liao , Pierre-Louis Bossart , Sanyog Kale , Srinivas Kandagatla , Rao Mandadapu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 3/7] soundwire: qcom: allow 16-bit sample interval for ports Date: Tue, 18 Apr 2023 11:54:43 +0200 Message-Id: <20230418095447.577001-4-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> References: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Message-ID-Hash: G5PF6H5TT3EMW27JMGEJZPYMYUMIZAMD X-Message-ID-Hash: G5PF6H5TT3EMW27JMGEJZPYMYUMIZAMD X-MailFrom: krzysztof.kozlowski@linaro.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: Krzysztof Kozlowski X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: The port sample interval was always 16-bit, split into low and high bytes. This split was unnecessary, although harmless for older devices because all of them used only lower byte (so values < 0xff). With support for Soundwire controller on Qualcomm SM8550 and its devices, both bytes will be used, thus add a new 'qcom,ports-sinterval' property to allow 16-bit sample intervals. Reviewed-by: Konrad Dybcio Signed-off-by: Krzysztof Kozlowski --- Changes since v2: 1. Use uint16 for qcom,ports-sinterval. 2. Add tags. Changes since v1: 1. Drop unneeded semicolon. --- drivers/soundwire/qcom.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index c296e0bf897b..d051dc408532 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -95,6 +95,7 @@ #define SWRM_DP_BLOCK_CTRL2_BANK(n, m) (0x1130 + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DP_PORT_HCTRL_BANK(n, m) (0x1134 + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DP_BLOCK_CTRL3_BANK(n, m) (0x1138 + 0x100 * (n - 1) + 0x40 * m) +#define SWRM_DP_SAMPLECTRL2_BANK(n, m) (0x113C + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DIN_DPn_PCM_PORT_CTRL(n) (0x1054 + 0x100 * (n - 1)) #define SWR_MSTR_MAX_REG_ADDR (0x1740) @@ -131,7 +132,7 @@ enum { }; struct qcom_swrm_port_config { - u8 si; + u16 si; u8 off1; u8 off2; u8 bp_mode; @@ -806,12 +807,20 @@ static int qcom_swrm_transport_params(struct sdw_bus *bus, value = pcfg->off1 << SWRM_DP_PORT_CTRL_OFFSET1_SHFT; value |= pcfg->off2 << SWRM_DP_PORT_CTRL_OFFSET2_SHFT; - value |= pcfg->si; + value |= pcfg->si & 0xff; ret = ctrl->reg_write(ctrl, reg, value); if (ret) goto err; + if (pcfg->si > 0xff) { + value = (pcfg->si >> 8) & 0xff; + reg = SWRM_DP_SAMPLECTRL2_BANK(params->port_num, bank); + ret = ctrl->reg_write(ctrl, reg, value); + if (ret) + goto err; + } + if (pcfg->lane_control != SWR_INVALID_PARAM) { reg = SWRM_DP_PORT_CTRL_2_BANK(params->port_num, bank); value = pcfg->lane_control; @@ -1185,7 +1194,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) struct device_node *np = ctrl->dev->of_node; u8 off1[QCOM_SDW_MAX_PORTS]; u8 off2[QCOM_SDW_MAX_PORTS]; - u8 si[QCOM_SDW_MAX_PORTS]; + u16 si[QCOM_SDW_MAX_PORTS]; u8 bp_mode[QCOM_SDW_MAX_PORTS] = { 0, }; u8 hstart[QCOM_SDW_MAX_PORTS]; u8 hstop[QCOM_SDW_MAX_PORTS]; @@ -1193,6 +1202,7 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) u8 blk_group_count[QCOM_SDW_MAX_PORTS]; u8 lane_control[QCOM_SDW_MAX_PORTS]; int i, ret, nports, val; + bool si_16 = false; ctrl->reg_read(ctrl, SWRM_COMP_PARAMS, &val); @@ -1236,9 +1246,14 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) return ret; ret = of_property_read_u8_array(np, "qcom,ports-sinterval-low", - si, nports); - if (ret) - return ret; + (u8 *)si, nports); + if (ret) { + ret = of_property_read_u16_array(np, "qcom,ports-sinterval", + si, nports); + if (ret) + return ret; + si_16 = true; + } ret = of_property_read_u8_array(np, "qcom,ports-block-pack-mode", bp_mode, nports); @@ -1266,7 +1281,10 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) for (i = 0; i < nports; i++) { /* Valid port number range is from 1-14 */ - ctrl->pconfig[i + 1].si = si[i]; + if (si_16) + ctrl->pconfig[i + 1].si = si[i]; + else + ctrl->pconfig[i + 1].si = ((u8 *)si)[i]; ctrl->pconfig[i + 1].off1 = off1[i]; ctrl->pconfig[i + 1].off2 = off2[i]; ctrl->pconfig[i + 1].bp_mode = bp_mode[i]; From patchwork Tue Apr 18 09:54:44 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 676938 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id EEBA5C77B71 for ; Tue, 18 Apr 2023 09:58:20 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id DA256E76; Tue, 18 Apr 2023 11:57:28 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz DA256E76 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1681811898; bh=JF3hPjqtF7UChf2+Zgj6dS5bGbe/JLlp8z88ApHFIJQ=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=QibXcbHZzfdIGs7E6B1SvTfIOJXb7Xb05LxJZ/bSeK6wOxpybBuQ6yuOYBwYbIpui uX/k/6rq72ozE9waH4lg69tPxiJJJl8bJKP78a9U7x9/x8FNNmwgJynaaPJcHbXKfQ 8PxlRl86B1q71TJvfnHIAjB/T0cFuatffTHYYcTU= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id C4205F8019B; Tue, 18 Apr 2023 11:56:25 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 9EA2BF8019B; Tue, 18 Apr 2023 11:56:22 +0200 (CEST) Received: from mail-ed1-x535.google.com (mail-ed1-x535.google.com [IPv6:2a00:1450:4864:20::535]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 2CCCFF8052E for ; Tue, 18 Apr 2023 11:54:57 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 2CCCFF8052E Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=wTDjo51X Received: by mail-ed1-x535.google.com with SMTP id 4fb4d7f45d1cf-50506111a6eso5156407a12.1 for ; Tue, 18 Apr 2023 02:54:57 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1681811696; x=1684403696; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=l45E/e+J1+wy3tdRKVuAF7W6CkfCYm5a4Dj3ukMS7nA=; b=wTDjo51XypBBPLjIYjXs2QdVuAFVhgkAw6Gs41qCwVBeKk+wBasONAEy458p76oBm3 Cprtn4A6qZF9q7BIpweGBJ9U+NCPzN/X6Yd7XMBJ+3/vuCMUdVmCgVB7pm0W63Lkou42 FpGzUioAp9YXVso7Ada4W53/SJe39OCPceYjHigAhTMK/7WbBxj//A1okEA7zjiK7tJp GRGQ1gkfr08jqAS10PoXblEi94X0Aw6wQ/VCa9USEbkb5ur1xDsGTnL0V/YDYC4DUTuJ L4PyMrRw9n4Z6h9JVxqOP83LpAuBYhuPW8wug8rMQ11Qh6FiBOLcOsUl9r8w5CQX48gD o3lw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681811696; x=1684403696; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=l45E/e+J1+wy3tdRKVuAF7W6CkfCYm5a4Dj3ukMS7nA=; b=TQLFHBQ13AcQQUwZqBaXQ53QeWci9lGa7G8OZL21XZYq2movaREgP35J4Opq9Qkk1H 8oit+Mq8Z51Y+A1oVvyWphdcGKzzfIYAfQXoTOSfD2qnp7ol3YYDPUCiOoeP9uUemZP3 V6iUonrexEfiEeEkKdPUOULHxJMT7KnqMRGIet2wgu9RIotgsFBNjeUAthZvr7lopKgw 3gpG51mKZB9eKW9/+uwhhnKa3vzD1QplcCBqjXth4IkgvqxLpR+iOFqSKd92ARIIb5HF OzoaaKYcXViK+gZli/NRuQWZfZr2V8lvT5dw8eOb0CyrnxwuxbZ8urkYWhYgI/s0M86a 29sQ== X-Gm-Message-State: AAQBX9fWl4ULlPCcpf96zvRjNCdOIVuqOLsebP4Skett1JSaGOG5/ifn dX6V0f+hXjLksBmVeZwmGU99tQ== X-Google-Smtp-Source: AKy350a1tTOFcsAQDJxoZyYuGZzhEr31r8CMDVLQx/K6zkkh0eQoiGBQBh/1k+9Gnef9+4OkKs8srQ== X-Received: by 2002:a05:6402:1156:b0:4fd:1cf1:b7b0 with SMTP id g22-20020a056402115600b004fd1cf1b7b0mr1577508edw.7.1681811696025; Tue, 18 Apr 2023 02:54:56 -0700 (PDT) Received: from krzk-bin.. ([2a02:810d:15c0:828:a276:7d35:5226:1c77]) by smtp.gmail.com with ESMTPSA id o4-20020a509b04000000b00504d04c939fsm7076578edi.59.2023.04.18.02.54.55 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:54:55 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Vinod Koul , Bard Liao , Pierre-Louis Bossart , Sanyog Kale , Srinivas Kandagatla , Rao Mandadapu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 4/7] soundwire: qcom: use consistently 'ctrl' as state variable name Date: Tue, 18 Apr 2023 11:54:44 +0200 Message-Id: <20230418095447.577001-5-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> References: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Message-ID-Hash: 3OQDWIMJUZ5DAVLTREJMXMHWF6H62TCT X-Message-ID-Hash: 3OQDWIMJUZ5DAVLTREJMXMHWF6H62TCT X-MailFrom: krzysztof.kozlowski@linaro.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: Krzysztof Kozlowski X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: The pointer to 'struct qcom_swrm_ctrl' was called sometimes 'swrm' and sometimes 'ctrl' variable. Choose one - 'ctrl' - so the code will be consistent and easier to read. No functional change. Reviewed-by: Srinivas Kandagagatla Tested-by: Srinivas Kandagagatla Reviewed-by: Konrad Dybcio Signed-off-by: Krzysztof Kozlowski --- Changes since v2: 1. Add tags. --- drivers/soundwire/qcom.c | 168 +++++++++++++++++++-------------------- 1 file changed, 84 insertions(+), 84 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index d051dc408532..dad12e9f5478 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -279,14 +279,14 @@ static u32 swrm_get_packed_reg_val(u8 *cmd_id, u8 cmd_data, return val; } -static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *swrm) +static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *ctrl) { u32 fifo_outstanding_data, value; int fifo_retry_count = SWR_OVERFLOW_RETRY_COUNT; do { /* Check for fifo underflow during read */ - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); fifo_outstanding_data = FIELD_GET(SWRM_RD_CMD_FIFO_CNT_MASK, value); /* Check if read data is available in read fifo */ @@ -297,39 +297,39 @@ static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *swrm) } while (fifo_retry_count--); if (fifo_outstanding_data == 0) { - dev_err_ratelimited(swrm->dev, "%s err read underflow\n", __func__); + dev_err_ratelimited(ctrl->dev, "%s err read underflow\n", __func__); return -EIO; } return 0; } -static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *swrm) +static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *ctrl) { u32 fifo_outstanding_cmds, value; int fifo_retry_count = SWR_OVERFLOW_RETRY_COUNT; do { /* Check for fifo overflow during write */ - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); fifo_outstanding_cmds = FIELD_GET(SWRM_WR_CMD_FIFO_CNT_MASK, value); /* Check for space in write fifo before writing */ - if (fifo_outstanding_cmds < swrm->wr_fifo_depth) + if (fifo_outstanding_cmds < ctrl->wr_fifo_depth) return 0; usleep_range(500, 510); } while (fifo_retry_count--); - if (fifo_outstanding_cmds == swrm->wr_fifo_depth) { - dev_err_ratelimited(swrm->dev, "%s err write overflow\n", __func__); + if (fifo_outstanding_cmds == ctrl->wr_fifo_depth) { + dev_err_ratelimited(ctrl->dev, "%s err write overflow\n", __func__); return -EIO; } return 0; } -static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, +static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data, u8 dev_addr, u16 reg_addr) { @@ -342,20 +342,20 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, val = swrm_get_packed_reg_val(&cmd_id, cmd_data, dev_addr, reg_addr); } else { - val = swrm_get_packed_reg_val(&swrm->wcmd_id, cmd_data, + val = swrm_get_packed_reg_val(&ctrl->wcmd_id, cmd_data, dev_addr, reg_addr); } - if (swrm_wait_for_wr_fifo_avail(swrm)) + if (swrm_wait_for_wr_fifo_avail(ctrl)) return SDW_CMD_FAIL_OTHER; if (cmd_id == SWR_BROADCAST_CMD_ID) - reinit_completion(&swrm->broadcast); + reinit_completion(&ctrl->broadcast); /* Its assumed that write is okay as we do not get any status back */ - swrm->reg_write(swrm, SWRM_CMD_FIFO_WR_CMD, val); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_WR_CMD, val); - if (swrm->version <= SWRM_VERSION_1_3_0) + if (ctrl->version <= SWRM_VERSION_1_3_0) usleep_range(150, 155); if (cmd_id == SWR_BROADCAST_CMD_ID) { @@ -363,7 +363,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, * sleep for 10ms for MSM soundwire variant to allow broadcast * command to complete. */ - ret = wait_for_completion_timeout(&swrm->broadcast, + ret = wait_for_completion_timeout(&ctrl->broadcast, msecs_to_jiffies(TIMEOUT_MS)); if (!ret) ret = SDW_CMD_IGNORED; @@ -376,41 +376,41 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *swrm, u8 cmd_data, return ret; } -static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm, +static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl, u8 dev_addr, u16 reg_addr, u32 len, u8 *rval) { u32 cmd_data, cmd_id, val, retry_attempt = 0; - val = swrm_get_packed_reg_val(&swrm->rcmd_id, len, dev_addr, reg_addr); + val = swrm_get_packed_reg_val(&ctrl->rcmd_id, len, dev_addr, reg_addr); /* * Check for outstanding cmd wrt. write fifo depth to avoid * overflow as read will also increase write fifo cnt. */ - swrm_wait_for_wr_fifo_avail(swrm); + swrm_wait_for_wr_fifo_avail(ctrl); /* wait for FIFO RD to complete to avoid overflow */ usleep_range(100, 105); - swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val); /* wait for FIFO RD CMD complete to avoid overflow */ usleep_range(250, 255); - if (swrm_wait_for_rd_fifo_avail(swrm)) + if (swrm_wait_for_rd_fifo_avail(ctrl)) return SDW_CMD_FAIL_OTHER; do { - swrm->reg_read(swrm, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data); + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data); rval[0] = cmd_data & 0xFF; cmd_id = FIELD_GET(SWRM_RD_FIFO_CMD_ID_MASK, cmd_data); - if (cmd_id != swrm->rcmd_id) { + if (cmd_id != ctrl->rcmd_id) { if (retry_attempt < (MAX_FIFO_RD_RETRY - 1)) { /* wait 500 us before retry on fifo read failure */ usleep_range(500, 505); - swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, SWRM_CMD_FIFO_FLUSH); - swrm->reg_write(swrm, SWRM_CMD_FIFO_RD_CMD, val); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val); } retry_attempt++; } else { @@ -419,9 +419,9 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *swrm, } while (retry_attempt < MAX_FIFO_RD_RETRY); - dev_err(swrm->dev, "failed to read fifo: reg: 0x%x, rcmd_id: 0x%x,\ + dev_err(ctrl->dev, "failed to read fifo: reg: 0x%x, rcmd_id: 0x%x,\ dev_num: 0x%x, cmd_data: 0x%x\n", - reg_addr, swrm->rcmd_id, dev_addr, cmd_data); + reg_addr, ctrl->rcmd_id, dev_addr, cmd_data); return SDW_CMD_IGNORED; } @@ -533,39 +533,39 @@ static int qcom_swrm_enumerate(struct sdw_bus *bus) static irqreturn_t qcom_swrm_wake_irq_handler(int irq, void *dev_id) { - struct qcom_swrm_ctrl *swrm = dev_id; + struct qcom_swrm_ctrl *ctrl = dev_id; int ret; - ret = pm_runtime_resume_and_get(swrm->dev); + ret = pm_runtime_resume_and_get(ctrl->dev); if (ret < 0 && ret != -EACCES) { - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "pm_runtime_resume_and_get failed in %s, ret %d\n", __func__, ret); return ret; } - if (swrm->wake_irq > 0) { - if (!irqd_irq_disabled(irq_get_irq_data(swrm->wake_irq))) - disable_irq_nosync(swrm->wake_irq); + if (ctrl->wake_irq > 0) { + if (!irqd_irq_disabled(irq_get_irq_data(ctrl->wake_irq))) + disable_irq_nosync(ctrl->wake_irq); } - pm_runtime_mark_last_busy(swrm->dev); - pm_runtime_put_autosuspend(swrm->dev); + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); return IRQ_HANDLED; } static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) { - struct qcom_swrm_ctrl *swrm = dev_id; + struct qcom_swrm_ctrl *ctrl = dev_id; u32 value, intr_sts, intr_sts_masked, slave_status; u32 i; int devnum; int ret = IRQ_HANDLED; - clk_prepare_enable(swrm->hclk); + clk_prepare_enable(ctrl->hclk); - swrm->reg_read(swrm, SWRM_INTERRUPT_STATUS, &intr_sts); - intr_sts_masked = intr_sts & swrm->intr_mask; + ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts); + intr_sts_masked = intr_sts & ctrl->intr_mask; do { for (i = 0; i < SWRM_INTERRUPT_MAX; i++) { @@ -575,80 +575,80 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) switch (value) { case SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ: - devnum = qcom_swrm_get_alert_slave_dev_num(swrm); + devnum = qcom_swrm_get_alert_slave_dev_num(ctrl); if (devnum < 0) { - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "no slave alert found.spurious interrupt\n"); } else { - sdw_handle_slave_status(&swrm->bus, swrm->status); + sdw_handle_slave_status(&ctrl->bus, ctrl->status); } break; case SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED: case SWRM_INTERRUPT_STATUS_CHANGE_ENUM_SLAVE_STATUS: - dev_dbg_ratelimited(swrm->dev, "SWR new slave attached\n"); - swrm->reg_read(swrm, SWRM_MCP_SLV_STATUS, &slave_status); - if (swrm->slave_status == slave_status) { - dev_dbg(swrm->dev, "Slave status not changed %x\n", + dev_dbg_ratelimited(ctrl->dev, "SWR new slave attached\n"); + ctrl->reg_read(ctrl, SWRM_MCP_SLV_STATUS, &slave_status); + if (ctrl->slave_status == slave_status) { + dev_dbg(ctrl->dev, "Slave status not changed %x\n", slave_status); } else { - qcom_swrm_get_device_status(swrm); - qcom_swrm_enumerate(&swrm->bus); - sdw_handle_slave_status(&swrm->bus, swrm->status); + qcom_swrm_get_device_status(ctrl); + qcom_swrm_enumerate(&ctrl->bus); + sdw_handle_slave_status(&ctrl->bus, ctrl->status); } break; case SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR bus clsh detected\n", __func__); - swrm->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - swrm->reg_write(swrm, SWRM_INTERRUPT_CPU_EN, swrm->intr_mask); + ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; + ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_RD_FIFO_OVERFLOW: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err_ratelimited(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err_ratelimited(ctrl->dev, "%s: SWR read FIFO overflow fifo status 0x%x\n", __func__, value); break; case SWRM_INTERRUPT_STATUS_RD_FIFO_UNDERFLOW: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err_ratelimited(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err_ratelimited(ctrl->dev, "%s: SWR read FIFO underflow fifo status 0x%x\n", __func__, value); break; case SWRM_INTERRUPT_STATUS_WR_CMD_FIFO_OVERFLOW: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err(ctrl->dev, "%s: SWR write FIFO overflow fifo status %x\n", __func__, value); - swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, 0x1); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1); break; case SWRM_INTERRUPT_STATUS_CMD_ERROR: - swrm->reg_read(swrm, SWRM_CMD_FIFO_STATUS, &value); - dev_err_ratelimited(swrm->dev, + ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + dev_err_ratelimited(ctrl->dev, "%s: SWR CMD error, fifo status 0x%x, flushing fifo\n", __func__, value); - swrm->reg_write(swrm, SWRM_CMD_FIFO_CMD, 0x1); + ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1); break; case SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR Port collision detected\n", __func__); - swrm->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION; - swrm->reg_write(swrm, - SWRM_INTERRUPT_CPU_EN, swrm->intr_mask); + ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION; + ctrl->reg_write(ctrl, + SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR read enable valid mismatch\n", __func__); - swrm->intr_mask &= + ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH; - swrm->reg_write(swrm, - SWRM_INTERRUPT_CPU_EN, swrm->intr_mask); + ctrl->reg_write(ctrl, + SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED: - complete(&swrm->broadcast); + complete(&ctrl->broadcast); break; case SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2: break; @@ -657,19 +657,19 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) case SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP: break; default: - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "%s: SWR unknown interrupt value: %d\n", __func__, value); ret = IRQ_NONE; break; } } - swrm->reg_write(swrm, SWRM_INTERRUPT_CLEAR, intr_sts); - swrm->reg_read(swrm, SWRM_INTERRUPT_STATUS, &intr_sts); - intr_sts_masked = intr_sts & swrm->intr_mask; + ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, intr_sts); + ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts); + intr_sts_masked = intr_sts & ctrl->intr_mask; } while (intr_sts_masked); - clk_disable_unprepare(swrm->hclk); + clk_disable_unprepare(ctrl->hclk); return ret; } @@ -1301,23 +1301,23 @@ static int qcom_swrm_get_port_config(struct qcom_swrm_ctrl *ctrl) #ifdef CONFIG_DEBUG_FS static int swrm_reg_show(struct seq_file *s_file, void *data) { - struct qcom_swrm_ctrl *swrm = s_file->private; + struct qcom_swrm_ctrl *ctrl = s_file->private; int reg, reg_val, ret; - ret = pm_runtime_resume_and_get(swrm->dev); + ret = pm_runtime_resume_and_get(ctrl->dev); if (ret < 0 && ret != -EACCES) { - dev_err_ratelimited(swrm->dev, + dev_err_ratelimited(ctrl->dev, "pm_runtime_resume_and_get failed in %s, ret %d\n", __func__, ret); return ret; } for (reg = 0; reg <= SWR_MSTR_MAX_REG_ADDR; reg += 4) { - swrm->reg_read(swrm, reg, ®_val); + ctrl->reg_read(ctrl, reg, ®_val); seq_printf(s_file, "0x%.3x: 0x%.2x\n", reg, reg_val); } - pm_runtime_mark_last_busy(swrm->dev); - pm_runtime_put_autosuspend(swrm->dev); + pm_runtime_mark_last_busy(ctrl->dev); + pm_runtime_put_autosuspend(ctrl->dev); return 0; @@ -1498,13 +1498,13 @@ static int qcom_swrm_remove(struct platform_device *pdev) return 0; } -static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *swrm) +static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *ctrl) { int retry = SWRM_LINK_STATUS_RETRY_CNT; int comp_sts; do { - swrm->reg_read(swrm, SWRM_COMP_STATUS, &comp_sts); + ctrl->reg_read(ctrl, SWRM_COMP_STATUS, &comp_sts); if (comp_sts & SWRM_FRM_GEN_ENABLED) return true; @@ -1512,7 +1512,7 @@ static bool swrm_wait_for_frame_gen_enabled(struct qcom_swrm_ctrl *swrm) usleep_range(500, 510); } while (retry--); - dev_err(swrm->dev, "%s: link status not %s\n", __func__, + dev_err(ctrl->dev, "%s: link status not %s\n", __func__, comp_sts & SWRM_FRM_GEN_ENABLED ? "connected" : "disconnected"); return false; From patchwork Tue Apr 18 09:54:45 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 674536 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 9AFEEC77B71 for ; Tue, 18 Apr 2023 09:57:33 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id 75FDDE7A; Tue, 18 Apr 2023 11:56:41 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz 75FDDE7A DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1681811851; bh=DOtMGQkk2N6lBA1ECkMdhsQzWbxGi9L5vC9oymWFves=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=hHT6F4w+JNiMBLSt92cWEUgJTKXxZ1kUWEFJ1kTO3Sm3+YYF3DXm2SHqPd6X3N8AB kTmUwG7zFH4rW4MNd/Kr+vZEBZhteNFJ4GZpo4gl48AyHNkEtBQaXDuC/MSFc5S9oO 4v/Dkkd6btr/2qOEahDdP15ODcQ77LNDNMr8NarY= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id 4A9DEF8055A; Tue, 18 Apr 2023 11:55:11 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 2DA97F80551; Tue, 18 Apr 2023 11:55:06 +0200 (CEST) Received: from mail-ed1-x530.google.com (mail-ed1-x530.google.com [IPv6:2a00:1450:4864:20::530]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 35F2BF800AC for ; Tue, 18 Apr 2023 11:54:58 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 35F2BF800AC Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=ln6My+Mk Received: by mail-ed1-x530.google.com with SMTP id 4fb4d7f45d1cf-5067736607fso3743143a12.0 for ; Tue, 18 Apr 2023 02:54:58 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1681811697; x=1684403697; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=c+l+hsPSTL+SQhVcuBaXgTPwNjHvTcsPoQKEgBb2Ew0=; b=ln6My+MkxEs63jljAyWAnu5QhJZV/RGwfS6j6zQdaGI8RHn83oytTAiqnW159SzoSZ thajP+L9fSGLwYdNk8MM4iPEjn8bXfwYZmSea6oRO8mrPS/5C+QP2Mnu4PGcfUs2p0aF 2dvKD7OxnQsa/2BaeJNr2NRrmXP/RDnQx/hOL8Q9Ui19VsOhLKxBoLQ5sD3KR/bLJCp9 qhsPinVdQcPL18W2IbJHJH5FuxrtW/Kz06xUS+HhnfDTN/988IkG8BVb6JTDqBfrQTAU zvX7catb2jMr2jI1ddA99wDB9XwNqSHOwP9qkOQWJgpeN0X35K0ymGe/Z63ElYNUn6sn iRHw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681811697; x=1684403697; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=c+l+hsPSTL+SQhVcuBaXgTPwNjHvTcsPoQKEgBb2Ew0=; b=SLeySGQtTUappChF3qIuVonVQWgE/d4Y9vftqXUNC1vQN8Xd9K8STzc2JcXLY0P1nJ XbpbhbBPua2pg9ds2gVh+wGUhRgq/lhvWmo91oSBmmzX9UGUJxnjqyqn8LKGYJrMPOoW YFJRQRXhwQtm7lbrS5uE0VyTrP+oMt6ZI28CKoDltghbhj211ovp0WwuUuadobXm0Jpy b/tJj8cqNonnJ0i2470fHhKWryu4RM6KMRcmKYkx1lOUSkmUF0KzOxkF3fqa2nL2D8nv 2diiObA1s+HbQqO457YJFkSYcw5A69n2INdVCt5zZS49KliZk3L2+2DAzto4k+/RyHtd 6Uug== X-Gm-Message-State: AAQBX9ezAHk7cOQGbisoNJRNxW1BxHTrI1wZ7rsq+RDl8TyzwMvcA675 UPl34kmUQTgnKwPiswesznp/Ag== X-Google-Smtp-Source: AKy350Z0ioOAU7o9OId/fnMKI9587p6uPbjRSQyqAn22p6OSEn7eW79KY+tClucp9eDHg5Zrg/YunA== X-Received: by 2002:aa7:cf11:0:b0:506:955d:a732 with SMTP id a17-20020aa7cf11000000b00506955da732mr1722355edy.25.1681811697178; Tue, 18 Apr 2023 02:54:57 -0700 (PDT) Received: from krzk-bin.. ([2a02:810d:15c0:828:a276:7d35:5226:1c77]) by smtp.gmail.com with ESMTPSA id o4-20020a509b04000000b00504d04c939fsm7076578edi.59.2023.04.18.02.54.56 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:54:56 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Vinod Koul , Bard Liao , Pierre-Louis Bossart , Sanyog Kale , Srinivas Kandagatla , Rao Mandadapu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 5/7] soundwire: qcom: prepare for handling different register layouts Date: Tue, 18 Apr 2023 11:54:45 +0200 Message-Id: <20230418095447.577001-6-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> References: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Message-ID-Hash: NYCO4BNCHXWNAACNKRKGGO2UHGOFWPR2 X-Message-ID-Hash: NYCO4BNCHXWNAACNKRKGGO2UHGOFWPR2 X-MailFrom: krzysztof.kozlowski@linaro.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: Krzysztof Kozlowski X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: Currently the driver supports Qualcomm Soundwire controller versions from v1.3 till v1.7 which mostly have same register layout. With coming Qualcomm Soundwire v2.0, several registers were moved and changed, thus a different register layout will have to be supported. Prepare for this by: 1. Renaming few register defines to indicate v1.3 (earliest supported) version, 2. Add a simple table for mapping register to its offset, 3. Change the code to use the mapping table. Since only few registers differ, this solution seems easier then switching to regmap fields. Reviewed-by: Srinivas Kandagagatla Tested-by: Srinivas Kandagagatla Reviewed-by: Konrad Dybcio Signed-off-by: Krzysztof Kozlowski --- Changes since v2: 1. Add tags. Changes since v1: 1. Fix lang typo in subject. --- drivers/soundwire/qcom.c | 130 +++++++++++++++++++++++++++++---------- 1 file changed, 97 insertions(+), 33 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index dad12e9f5478..eac566f168da 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -41,7 +41,7 @@ #define SWRM_COMP_PARAMS_DOUT_PORTS_MASK GENMASK(4, 0) #define SWRM_COMP_PARAMS_DIN_PORTS_MASK GENMASK(9, 5) #define SWRM_COMP_MASTER_ID 0x104 -#define SWRM_INTERRUPT_STATUS 0x200 +#define SWRM_V1_3_INTERRUPT_STATUS 0x200 #define SWRM_INTERRUPT_STATUS_RMSK GENMASK(16, 0) #define SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ BIT(0) #define SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED BIT(1) @@ -58,20 +58,20 @@ #define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2 BIT(14) #define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP BIT(16) #define SWRM_INTERRUPT_MAX 17 -#define SWRM_INTERRUPT_MASK_ADDR 0x204 -#define SWRM_INTERRUPT_CLEAR 0x208 -#define SWRM_INTERRUPT_CPU_EN 0x210 -#define SWRM_CMD_FIFO_WR_CMD 0x300 -#define SWRM_CMD_FIFO_RD_CMD 0x304 +#define SWRM_V1_3_INTERRUPT_MASK_ADDR 0x204 +#define SWRM_V1_3_INTERRUPT_CLEAR 0x208 +#define SWRM_V1_3_INTERRUPT_CPU_EN 0x210 +#define SWRM_V1_3_CMD_FIFO_WR_CMD 0x300 +#define SWRM_V1_3_CMD_FIFO_RD_CMD 0x304 #define SWRM_CMD_FIFO_CMD 0x308 #define SWRM_CMD_FIFO_FLUSH 0x1 -#define SWRM_CMD_FIFO_STATUS 0x30C +#define SWRM_V1_3_CMD_FIFO_STATUS 0x30C #define SWRM_RD_CMD_FIFO_CNT_MASK GENMASK(20, 16) #define SWRM_WR_CMD_FIFO_CNT_MASK GENMASK(12, 8) #define SWRM_CMD_FIFO_CFG_ADDR 0x314 #define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE BIT(31) #define SWRM_RD_WR_CMD_RETRIES 0x7 -#define SWRM_CMD_FIFO_RD_FIFO_ADDR 0x318 +#define SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR 0x318 #define SWRM_RD_FIFO_CMD_ID_MASK GENMASK(11, 8) #define SWRM_ENUMERATOR_CFG_ADDR 0x500 #define SWRM_ENUMERATOR_SLAVE_DEV_ID_1(m) (0x530 + 0x8 * (m)) @@ -97,7 +97,7 @@ #define SWRM_DP_BLOCK_CTRL3_BANK(n, m) (0x1138 + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DP_SAMPLECTRL2_BANK(n, m) (0x113C + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DIN_DPn_PCM_PORT_CTRL(n) (0x1054 + 0x100 * (n - 1)) -#define SWR_MSTR_MAX_REG_ADDR (0x1740) +#define SWR_V1_3_MSTR_MAX_REG_ADDR 0x1740 #define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT 0x18 #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT 0x10 @@ -143,10 +143,28 @@ struct qcom_swrm_port_config { u8 lane_control; }; +/* + * Internal IDs for different register layouts. Only few registers differ per + * each variant, so the list of IDs below does not include all of registers. + */ +enum { + SWRM_REG_FRAME_GEN_ENABLED, + SWRM_REG_INTERRUPT_STATUS, + SWRM_REG_INTERRUPT_MASK_ADDR, + SWRM_REG_INTERRUPT_CLEAR, + SWRM_REG_INTERRUPT_CPU_EN, + SWRM_REG_CMD_FIFO_WR_CMD, + SWRM_REG_CMD_FIFO_RD_CMD, + SWRM_REG_CMD_FIFO_STATUS, + SWRM_REG_CMD_FIFO_RD_FIFO_ADDR, +}; + struct qcom_swrm_ctrl { struct sdw_bus bus; struct device *dev; struct regmap *regmap; + u32 max_reg; + const unsigned int *reg_layout; void __iomem *mmio; struct reset_control *audio_cgcr; #ifdef CONFIG_DEBUG_FS @@ -187,22 +205,42 @@ struct qcom_swrm_data { u32 default_cols; u32 default_rows; bool sw_clk_gate_required; + u32 max_reg; + const unsigned int *reg_layout; +}; + +static const unsigned int swrm_v1_3_reg_layout[] = { + [SWRM_REG_FRAME_GEN_ENABLED] = SWRM_COMP_STATUS, + [SWRM_REG_INTERRUPT_STATUS] = SWRM_V1_3_INTERRUPT_STATUS, + [SWRM_REG_INTERRUPT_MASK_ADDR] = SWRM_V1_3_INTERRUPT_MASK_ADDR, + [SWRM_REG_INTERRUPT_CLEAR] = SWRM_V1_3_INTERRUPT_CLEAR, + [SWRM_REG_INTERRUPT_CPU_EN] = SWRM_V1_3_INTERRUPT_CPU_EN, + [SWRM_REG_CMD_FIFO_WR_CMD] = SWRM_V1_3_CMD_FIFO_WR_CMD, + [SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V1_3_CMD_FIFO_RD_CMD, + [SWRM_REG_CMD_FIFO_STATUS] = SWRM_V1_3_CMD_FIFO_STATUS, + [SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR, }; static const struct qcom_swrm_data swrm_v1_3_data = { .default_rows = 48, .default_cols = 16, + .max_reg = SWR_V1_3_MSTR_MAX_REG_ADDR, + .reg_layout = swrm_v1_3_reg_layout, }; static const struct qcom_swrm_data swrm_v1_5_data = { .default_rows = 50, .default_cols = 16, + .max_reg = SWR_V1_3_MSTR_MAX_REG_ADDR, + .reg_layout = swrm_v1_3_reg_layout, }; static const struct qcom_swrm_data swrm_v1_6_data = { .default_rows = 50, .default_cols = 16, .sw_clk_gate_required = true, + .max_reg = SWR_V1_3_MSTR_MAX_REG_ADDR, + .reg_layout = swrm_v1_3_reg_layout, }; #define to_qcom_sdw(b) container_of(b, struct qcom_swrm_ctrl, bus) @@ -286,7 +324,8 @@ static int swrm_wait_for_rd_fifo_avail(struct qcom_swrm_ctrl *ctrl) do { /* Check for fifo underflow during read */ - ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS], + &value); fifo_outstanding_data = FIELD_GET(SWRM_RD_CMD_FIFO_CNT_MASK, value); /* Check if read data is available in read fifo */ @@ -311,7 +350,8 @@ static int swrm_wait_for_wr_fifo_avail(struct qcom_swrm_ctrl *ctrl) do { /* Check for fifo overflow during write */ - ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS], + &value); fifo_outstanding_cmds = FIELD_GET(SWRM_WR_CMD_FIFO_CNT_MASK, value); /* Check for space in write fifo before writing */ @@ -353,7 +393,7 @@ static int qcom_swrm_cmd_fifo_wr_cmd(struct qcom_swrm_ctrl *ctrl, u8 cmd_data, reinit_completion(&ctrl->broadcast); /* Its assumed that write is okay as we do not get any status back */ - ctrl->reg_write(ctrl, SWRM_CMD_FIFO_WR_CMD, val); + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_WR_CMD], val); if (ctrl->version <= SWRM_VERSION_1_3_0) usleep_range(150, 155); @@ -392,7 +432,7 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl, /* wait for FIFO RD to complete to avoid overflow */ usleep_range(100, 105); - ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val); + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_RD_CMD], val); /* wait for FIFO RD CMD complete to avoid overflow */ usleep_range(250, 255); @@ -400,7 +440,8 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl, return SDW_CMD_FAIL_OTHER; do { - ctrl->reg_read(ctrl, SWRM_CMD_FIFO_RD_FIFO_ADDR, &cmd_data); + ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_CMD_FIFO_RD_FIFO_ADDR], + &cmd_data); rval[0] = cmd_data & 0xFF; cmd_id = FIELD_GET(SWRM_RD_FIFO_CMD_ID_MASK, cmd_data); @@ -410,7 +451,9 @@ static int qcom_swrm_cmd_fifo_rd_cmd(struct qcom_swrm_ctrl *ctrl, usleep_range(500, 505); ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, SWRM_CMD_FIFO_FLUSH); - ctrl->reg_write(ctrl, SWRM_CMD_FIFO_RD_CMD, val); + ctrl->reg_write(ctrl, + ctrl->reg_layout[SWRM_REG_CMD_FIFO_RD_CMD], + val); } retry_attempt++; } else { @@ -564,7 +607,8 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) int ret = IRQ_HANDLED; clk_prepare_enable(ctrl->hclk); - ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts); + ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_STATUS], + &intr_sts); intr_sts_masked = intr_sts & ctrl->intr_mask; do { @@ -602,29 +646,39 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) "%s: SWR bus clsh detected\n", __func__); ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); + ctrl->reg_write(ctrl, + ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], + ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_RD_FIFO_OVERFLOW: - ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, + ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS], + &value); dev_err_ratelimited(ctrl->dev, "%s: SWR read FIFO overflow fifo status 0x%x\n", __func__, value); break; case SWRM_INTERRUPT_STATUS_RD_FIFO_UNDERFLOW: - ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, + ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS], + &value); dev_err_ratelimited(ctrl->dev, "%s: SWR read FIFO underflow fifo status 0x%x\n", __func__, value); break; case SWRM_INTERRUPT_STATUS_WR_CMD_FIFO_OVERFLOW: - ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, + ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS], + &value); dev_err(ctrl->dev, "%s: SWR write FIFO overflow fifo status %x\n", __func__, value); ctrl->reg_write(ctrl, SWRM_CMD_FIFO_CMD, 0x1); break; case SWRM_INTERRUPT_STATUS_CMD_ERROR: - ctrl->reg_read(ctrl, SWRM_CMD_FIFO_STATUS, &value); + ctrl->reg_read(ctrl, + ctrl->reg_layout[SWRM_REG_CMD_FIFO_STATUS], + &value); dev_err_ratelimited(ctrl->dev, "%s: SWR CMD error, fifo status 0x%x, flushing fifo\n", __func__, value); @@ -636,7 +690,8 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) __func__); ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION; ctrl->reg_write(ctrl, - SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); + ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], + ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH: dev_err_ratelimited(ctrl->dev, @@ -645,7 +700,8 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH; ctrl->reg_write(ctrl, - SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); + ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], + ctrl->intr_mask); break; case SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED: complete(&ctrl->broadcast); @@ -664,8 +720,10 @@ static irqreturn_t qcom_swrm_irq_handler(int irq, void *dev_id) break; } } - ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, intr_sts); - ctrl->reg_read(ctrl, SWRM_INTERRUPT_STATUS, &intr_sts); + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CLEAR], + intr_sts); + ctrl->reg_read(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_STATUS], + &intr_sts); intr_sts_masked = intr_sts & ctrl->intr_mask; } while (intr_sts_masked); @@ -690,7 +748,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) ctrl->intr_mask = SWRM_INTERRUPT_STATUS_RMSK; /* Mask soundwire interrupts */ - ctrl->reg_write(ctrl, SWRM_INTERRUPT_MASK_ADDR, + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], SWRM_INTERRUPT_STATUS_RMSK); /* Configure No pings */ @@ -723,7 +781,7 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) /* enable CPU IRQs */ if (ctrl->mmio) { - ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], SWRM_INTERRUPT_STATUS_RMSK); } ctrl->slave_status = 0; @@ -1312,7 +1370,7 @@ static int swrm_reg_show(struct seq_file *s_file, void *data) return ret; } - for (reg = 0; reg <= SWR_MSTR_MAX_REG_ADDR; reg += 4) { + for (reg = 0; reg <= ctrl->max_reg; reg += 4) { ctrl->reg_read(ctrl, reg, ®_val); seq_printf(s_file, "0x%.3x: 0x%.2x\n", reg, reg_val); } @@ -1340,6 +1398,8 @@ static int qcom_swrm_probe(struct platform_device *pdev) return -ENOMEM; data = of_device_get_match_data(dev); + ctrl->max_reg = data->max_reg; + ctrl->reg_layout = data->reg_layout; ctrl->rows_index = sdw_find_row_index(data->default_rows); ctrl->cols_index = sdw_find_col_index(data->default_cols); #if IS_REACHABLE(CONFIG_SLIMBUS) @@ -1556,12 +1616,14 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) } else { ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); } - ctrl->reg_write(ctrl, SWRM_INTERRUPT_CLEAR, + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CLEAR], SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET); ctrl->intr_mask |= SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - ctrl->reg_write(ctrl, SWRM_INTERRUPT_MASK_ADDR, ctrl->intr_mask); - ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + ctrl->intr_mask); + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], + ctrl->intr_mask); usleep_range(100, 105); if (!swrm_wait_for_frame_gen_enabled(ctrl)) @@ -1583,8 +1645,10 @@ static int __maybe_unused swrm_runtime_suspend(struct device *dev) if (!ctrl->clock_stop_not_supported) { /* Mask bus clash interrupt */ ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - ctrl->reg_write(ctrl, SWRM_INTERRUPT_MASK_ADDR, ctrl->intr_mask); - ctrl->reg_write(ctrl, SWRM_INTERRUPT_CPU_EN, ctrl->intr_mask); + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + ctrl->intr_mask); + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], + ctrl->intr_mask); /* Prepare slaves for clock stop */ ret = sdw_bus_prep_clk_stop(&ctrl->bus); if (ret < 0 && ret != -ENODATA) { From patchwork Tue Apr 18 09:54:46 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 674535 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id EEFE4C77B75 for ; Tue, 18 Apr 2023 09:57:58 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id AD531E12; Tue, 18 Apr 2023 11:57:06 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz AD531E12 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1681811876; bh=Gs/NymUBTI9CpUhREV0xgvnHQZYsJoCsP1tHXtvFREQ=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=e9PwtoKiSzz6MMPCzyahPFTAu7DxQzv/E/t5rrMqxq0hq7PCyYGBPbuflVOjSFdpU i22HFxWp5Q9okTNjPZ7+uuShwJMyXnom2AV9zv9UT49gHjxG28pJFFpP508MEigEsy wIoROt1JxlFEcmP1gYRNCBoXmDKENXzC3j8dgOis= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id 59F8AF80568; Tue, 18 Apr 2023 11:55:14 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 234C9F80548; Tue, 18 Apr 2023 11:55:07 +0200 (CEST) Received: from mail-ed1-x534.google.com (mail-ed1-x534.google.com [IPv6:2a00:1450:4864:20::534]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id E5767F804FC for ; Tue, 18 Apr 2023 11:54:59 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz E5767F804FC Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=cP2Tgbs9 Received: by mail-ed1-x534.google.com with SMTP id 4fb4d7f45d1cf-5055141a8fdso3985211a12.3 for ; Tue, 18 Apr 2023 02:54:59 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1681811698; x=1684403698; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=2Nx1BeZSP+2eDoJ5Z7QTitc5BQuzRj7iPixLgT5uLpw=; b=cP2Tgbs9PJW8SJKjyhmIKm4CekbTUX8t6OmfP91YAFKLOkbZM6kWE4m/KVKPVPYsEE evP4Rn/qR7hHUOfsEEOOloeVCgUrsKuB5J/U3MT+KXmNtZnb5rXVPPb5GyT41n4zXs1L Dqg1eOtg5Ozsh3uJg3N96tcIAL1SuDgcYH4YurqBxxV3EaRtK2kzsN3KQiT5Qosxrwq8 mPk0tXCjfAik4Mq/QWm8Q94DfCl+VISQ0MUXka07xoUcapykDIcBN76NtQ/AiPas42zj UdnYuz4QWZ8Iw3iG5hT0INx40IP8V8zzwR75gKDNItflwMZl/GSXEo8z1RaNT4GXp8f7 88og== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681811698; x=1684403698; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=2Nx1BeZSP+2eDoJ5Z7QTitc5BQuzRj7iPixLgT5uLpw=; b=kcqmIDO+Jgxao9DELUTGiWQjdi1775cdDY779fBQwv7mCGmS2BxINbJy6a+HjnDSOQ NE5+4DMucMfPRJrCT6jrnR3X/nfJMmSNihDydCpBDyRdU5+7A6maqB2b0wIxkgto3lDQ JeWJJTPOUT4Luw0fdBBzrsxmnkPd+zZaqrQi5co79Xp1kyB9HbyYAgZAWggGO157GYWP mS7rCe9DzXh3sL+NAgqKGDLl1h9rzE2odZq6/nOdIJ4FknM/geBdo9/AKiIOgDSgQnNH XL0ZX2ul9NeeqQ85ZFrOY7/Lw/N4rstFJ1me+ct2rEQCcQOciP6ZEj4PXgTENDSAmaEL wBDw== X-Gm-Message-State: AAQBX9flRvP9QfbEDNTzO9aTm2pcfujyknfsmWrrzB5Q/biJkiMkQ12t cvUvrqNE8ueCcUx6RUqDoGLAfA== X-Google-Smtp-Source: AKy350Yg8RmJxNJ1gaWfyyJzXgyJ2voFZOhEdiT/87+AsNokT5yzDzf/cLx+B0npO9/hGoGaMVKfxQ== X-Received: by 2002:a50:fc18:0:b0:504:7ffa:98d9 with SMTP id i24-20020a50fc18000000b005047ffa98d9mr1664216edr.42.1681811698250; Tue, 18 Apr 2023 02:54:58 -0700 (PDT) Received: from krzk-bin.. ([2a02:810d:15c0:828:a276:7d35:5226:1c77]) by smtp.gmail.com with ESMTPSA id o4-20020a509b04000000b00504d04c939fsm7076578edi.59.2023.04.18.02.54.57 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:54:57 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Vinod Koul , Bard Liao , Pierre-Louis Bossart , Sanyog Kale , Srinivas Kandagatla , Rao Mandadapu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 6/7] soundwire: qcom: add support for v2.0.0 controller Date: Tue, 18 Apr 2023 11:54:46 +0200 Message-Id: <20230418095447.577001-7-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> References: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Message-ID-Hash: BVEAKAPFUJXAYY2DGIOKOI743OR2DAYG X-Message-ID-Hash: BVEAKAPFUJXAYY2DGIOKOI743OR2DAYG X-MailFrom: krzysztof.kozlowski@linaro.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: Krzysztof Kozlowski X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: Add support for Qualcomm Soundwire Controller with a bit different register layout. Reviewed-by: Konrad Dybcio Signed-off-by: Krzysztof Kozlowski --- Changes since v2: 1. Add tags. --- drivers/soundwire/qcom.c | 65 +++++++++++++++++++++++++++++++++++----- 1 file changed, 57 insertions(+), 8 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index eac566f168da..90afc8f15b82 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -31,6 +31,7 @@ #define SWRM_VERSION_1_3_0 0x01030000 #define SWRM_VERSION_1_5_1 0x01050001 #define SWRM_VERSION_1_7_0 0x01070000 +#define SWRM_VERSION_2_0_0 0x02000000 #define SWRM_COMP_HW_VERSION 0x00 #define SWRM_COMP_CFG_ADDR 0x04 #define SWRM_COMP_CFG_IRQ_LEVEL_OR_PULSE_MSK BIT(1) @@ -42,6 +43,7 @@ #define SWRM_COMP_PARAMS_DIN_PORTS_MASK GENMASK(9, 5) #define SWRM_COMP_MASTER_ID 0x104 #define SWRM_V1_3_INTERRUPT_STATUS 0x200 +#define SWRM_V2_0_INTERRUPT_STATUS 0x5000 #define SWRM_INTERRUPT_STATUS_RMSK GENMASK(16, 0) #define SWRM_INTERRUPT_STATUS_SLAVE_PEND_IRQ BIT(0) #define SWRM_INTERRUPT_STATUS_NEW_SLAVE_ATTACHED BIT(1) @@ -54,24 +56,32 @@ #define SWRM_INTERRUPT_STATUS_DOUT_PORT_COLLISION BIT(8) #define SWRM_INTERRUPT_STATUS_READ_EN_RD_VALID_MISMATCH BIT(9) #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED BIT(10) +#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED BIT(11) +#define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL BIT(12) #define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2 BIT(13) #define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2 BIT(14) #define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP BIT(16) #define SWRM_INTERRUPT_MAX 17 #define SWRM_V1_3_INTERRUPT_MASK_ADDR 0x204 #define SWRM_V1_3_INTERRUPT_CLEAR 0x208 +#define SWRM_V2_0_INTERRUPT_CLEAR 0x5008 #define SWRM_V1_3_INTERRUPT_CPU_EN 0x210 +#define SWRM_V2_0_INTERRUPT_CPU_EN 0x5004 #define SWRM_V1_3_CMD_FIFO_WR_CMD 0x300 +#define SWRM_V2_0_CMD_FIFO_WR_CMD 0x5020 #define SWRM_V1_3_CMD_FIFO_RD_CMD 0x304 +#define SWRM_V2_0_CMD_FIFO_RD_CMD 0x5024 #define SWRM_CMD_FIFO_CMD 0x308 #define SWRM_CMD_FIFO_FLUSH 0x1 #define SWRM_V1_3_CMD_FIFO_STATUS 0x30C +#define SWRM_V2_0_CMD_FIFO_STATUS 0x5050 #define SWRM_RD_CMD_FIFO_CNT_MASK GENMASK(20, 16) #define SWRM_WR_CMD_FIFO_CNT_MASK GENMASK(12, 8) #define SWRM_CMD_FIFO_CFG_ADDR 0x314 #define SWRM_CONTINUE_EXEC_ON_CMD_IGNORE BIT(31) #define SWRM_RD_WR_CMD_RETRIES 0x7 #define SWRM_V1_3_CMD_FIFO_RD_FIFO_ADDR 0x318 +#define SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR 0x5040 #define SWRM_RD_FIFO_CMD_ID_MASK GENMASK(11, 8) #define SWRM_ENUMERATOR_CFG_ADDR 0x500 #define SWRM_ENUMERATOR_SLAVE_DEV_ID_1(m) (0x530 + 0x8 * (m)) @@ -98,6 +108,11 @@ #define SWRM_DP_SAMPLECTRL2_BANK(n, m) (0x113C + 0x100 * (n - 1) + 0x40 * m) #define SWRM_DIN_DPn_PCM_PORT_CTRL(n) (0x1054 + 0x100 * (n - 1)) #define SWR_V1_3_MSTR_MAX_REG_ADDR 0x1740 +#define SWR_V2_0_MSTR_MAX_REG_ADDR 0x50ac + +#define SWRM_V2_0_CLK_CTRL 0x5060 +#define SWRM_V2_0_CLK_CTRL_CLK_START BIT(0) +#define SWRM_V2_0_LINK_STATUS 0x5064 #define SWRM_DP_PORT_CTRL_EN_CHAN_SHFT 0x18 #define SWRM_DP_PORT_CTRL_OFFSET2_SHFT 0x10 @@ -243,6 +258,26 @@ static const struct qcom_swrm_data swrm_v1_6_data = { .reg_layout = swrm_v1_3_reg_layout, }; +static const unsigned int swrm_v2_0_reg_layout[] = { + [SWRM_REG_FRAME_GEN_ENABLED] = SWRM_V2_0_LINK_STATUS, + [SWRM_REG_INTERRUPT_STATUS] = SWRM_V2_0_INTERRUPT_STATUS, + [SWRM_REG_INTERRUPT_MASK_ADDR] = 0, /* Not present */ + [SWRM_REG_INTERRUPT_CLEAR] = SWRM_V2_0_INTERRUPT_CLEAR, + [SWRM_REG_INTERRUPT_CPU_EN] = SWRM_V2_0_INTERRUPT_CPU_EN, + [SWRM_REG_CMD_FIFO_WR_CMD] = SWRM_V2_0_CMD_FIFO_WR_CMD, + [SWRM_REG_CMD_FIFO_RD_CMD] = SWRM_V2_0_CMD_FIFO_RD_CMD, + [SWRM_REG_CMD_FIFO_STATUS] = SWRM_V2_0_CMD_FIFO_STATUS, + [SWRM_REG_CMD_FIFO_RD_FIFO_ADDR] = SWRM_V2_0_CMD_FIFO_RD_FIFO_ADDR, +}; + +static const struct qcom_swrm_data swrm_v2_0_data = { + .default_rows = 50, + .default_cols = 16, + .sw_clk_gate_required = true, + .max_reg = SWR_V2_0_MSTR_MAX_REG_ADDR, + .reg_layout = swrm_v2_0_reg_layout, +}; + #define to_qcom_sdw(b) container_of(b, struct qcom_swrm_ctrl, bus) static int qcom_swrm_ahb_reg_read(struct qcom_swrm_ctrl *ctrl, int reg, @@ -748,18 +783,23 @@ static int qcom_swrm_init(struct qcom_swrm_ctrl *ctrl) ctrl->intr_mask = SWRM_INTERRUPT_STATUS_RMSK; /* Mask soundwire interrupts */ - ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], - SWRM_INTERRUPT_STATUS_RMSK); + if (ctrl->version < SWRM_VERSION_2_0_0) + ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + SWRM_INTERRUPT_STATUS_RMSK); /* Configure No pings */ ctrl->reg_read(ctrl, SWRM_MCP_CFG_ADDR, &val); u32p_replace_bits(&val, SWRM_DEF_CMD_NO_PINGS, SWRM_MCP_CFG_MAX_NUM_OF_CMD_NO_PINGS_BMSK); ctrl->reg_write(ctrl, SWRM_MCP_CFG_ADDR, val); - if (ctrl->version >= SWRM_VERSION_1_7_0) { + if (ctrl->version == SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); + } else if (ctrl->version >= SWRM_VERSION_2_0_0) { + ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); + ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL, + SWRM_V2_0_CLK_CTRL_CLK_START); } else { ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); } @@ -1609,10 +1649,14 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) } else { reset_control_reset(ctrl->audio_cgcr); - if (ctrl->version >= SWRM_VERSION_1_7_0) { + if (ctrl->version == SWRM_VERSION_1_7_0) { ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START << SWRM_EE_CPU); + } else if (ctrl->version >= SWRM_VERSION_2_0_0) { + ctrl->reg_write(ctrl, SWRM_LINK_MANAGER_EE, SWRM_EE_CPU); + ctrl->reg_write(ctrl, SWRM_V2_0_CLK_CTRL, + SWRM_V2_0_CLK_CTRL_CLK_START); } else { ctrl->reg_write(ctrl, SWRM_MCP_BUS_CTRL, SWRM_MCP_BUS_CLK_START); } @@ -1620,8 +1664,10 @@ static int __maybe_unused swrm_runtime_resume(struct device *dev) SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET); ctrl->intr_mask |= SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], - ctrl->intr_mask); + if (ctrl->version < SWRM_VERSION_2_0_0) + ctrl->reg_write(ctrl, + ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + ctrl->intr_mask); ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], ctrl->intr_mask); @@ -1645,8 +1691,10 @@ static int __maybe_unused swrm_runtime_suspend(struct device *dev) if (!ctrl->clock_stop_not_supported) { /* Mask bus clash interrupt */ ctrl->intr_mask &= ~SWRM_INTERRUPT_STATUS_MASTER_CLASH_DET; - ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], - ctrl->intr_mask); + if (ctrl->version < SWRM_VERSION_2_0_0) + ctrl->reg_write(ctrl, + ctrl->reg_layout[SWRM_REG_INTERRUPT_MASK_ADDR], + ctrl->intr_mask); ctrl->reg_write(ctrl, ctrl->reg_layout[SWRM_REG_INTERRUPT_CPU_EN], ctrl->intr_mask); /* Prepare slaves for clock stop */ @@ -1684,6 +1732,7 @@ static const struct of_device_id qcom_swrm_of_match[] = { { .compatible = "qcom,soundwire-v1.5.1", .data = &swrm_v1_5_data }, { .compatible = "qcom,soundwire-v1.6.0", .data = &swrm_v1_6_data }, { .compatible = "qcom,soundwire-v1.7.0", .data = &swrm_v1_5_data }, + { .compatible = "qcom,soundwire-v2.0.0", .data = &swrm_v2_0_data }, {/* sentinel */}, }; From patchwork Tue Apr 18 09:54:47 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Krzysztof Kozlowski X-Patchwork-Id: 676939 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from alsa0.perex.cz (alsa0.perex.cz [77.48.224.243]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id B9D45C77B75 for ; Tue, 18 Apr 2023 09:57:35 +0000 (UTC) Received: from alsa1.perex.cz (alsa1.perex.cz [207.180.221.201]) (using TLSv1.2 with cipher ADH-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by alsa0.perex.cz (Postfix) with ESMTPS id C9CC1E90; Tue, 18 Apr 2023 11:56:43 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa0.perex.cz C9CC1E90 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=alsa-project.org; s=default; t=1681811853; bh=Hr0oqtquOz2ToHxv0Fl8xScVsWjSuSpNNl19kiHZSeA=; h=From:To:Subject:Date:In-Reply-To:References:CC:List-Id: List-Archive:List-Help:List-Owner:List-Post:List-Subscribe: List-Unsubscribe:From; b=r62wHhhGPcgymx9w0RwssJj1s4xLMXqk4aWDxr4wurNMc6CzpSltzlqV4s2wNxH1K auTnDKTS+4BqMGAQ6xne3Sj8BMC4+Bew/wYiFFrAG1ek5hUTyrGcO+nWmM/1m/sMF2 00YhMcJPi5+zV4BQLRyPZEDxZ7x4GxJ7Bzy33aUU= Received: from mailman-core.alsa-project.org (mailman-core.alsa-project.org [10.254.200.10]) by alsa1.perex.cz (Postfix) with ESMTP id E9D3CF80564; Tue, 18 Apr 2023 11:55:12 +0200 (CEST) Received: by alsa1.perex.cz (Postfix, from userid 50401) id 19477F80552; Tue, 18 Apr 2023 11:55:07 +0200 (CEST) Received: from mail-ej1-x62f.google.com (mail-ej1-x62f.google.com [IPv6:2a00:1450:4864:20::62f]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits) key-exchange X25519 server-signature RSA-PSS (4096 bits) server-digest SHA256) (No client certificate requested) by alsa1.perex.cz (Postfix) with ESMTPS id 44F23F8052D for ; Tue, 18 Apr 2023 11:55:00 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 alsa1.perex.cz 44F23F8052D Authentication-Results: alsa1.perex.cz; dkim=pass (2048-bit key, unprotected) header.d=linaro.org header.i=@linaro.org header.a=rsa-sha256 header.s=google header.b=B/zuyYIG Received: by mail-ej1-x62f.google.com with SMTP id u3so19643137ejj.12 for ; Tue, 18 Apr 2023 02:55:00 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1681811699; x=1684403699; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=Rm5Clkhi7OKyfk2gyaI7Jz7GWaSKwLEnRxea7jsImnE=; b=B/zuyYIGHjFHmCaELOHZqzcpXx1oeztJyGgpjhVFTT04tNSu+qVh7QsJ5voRLZCtJX KMyJbWjMMswC9N7QP9G/Wj9Ah7Yyzv4XpEmnUM8Fdd32ANk27C0pnTwcP3Q1O9x0QrzT AFfD5LIiFqk+CbE2Z17q3vwdPUJJ/FVzbPUPycvm3HPqMEUSVqkrBMmrmfbCv/fORT+V 37FcsPsQ4+vHLvFQa/1PxzdmuaTib3C1vu3WhLI4pcoXYuW4U5JYQWKdbYnm4VCar8nv 81RPjL377XhYn6mFlWUVyS7SyfHzro9GqbwzoSvmL5vLqE26OrxHcjkL+OTtpXxvm/7W hJBw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20221208; t=1681811699; x=1684403699; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=Rm5Clkhi7OKyfk2gyaI7Jz7GWaSKwLEnRxea7jsImnE=; b=OaWzafAF7fGWpV55a6F2IP68mD0C2TV5nrYw7uEdHRB6qFaKsKaOJ/DlpcJHocoML/ 0PIRj6ijHa3Sg6P4pxsa2d6edwlN82/No+pIwRJkKiyPIMfvIryTKjkSQBczuUBRTI1j xfEyQIs4mQ/saLr9LesMNuPWY4sKbYKFufYr9mXVSO3CQbiZph6lNesGy8ChOCHPSODG MtD0DPAQQ3sAZ4YUNiNJRxsM5NaSL6yvMUiw6wlM/v5lFbwM9yVs5WZ2oRySqmbJe1Sl NudWy8YV1LD2G1RXhbgl/EvMwrtRm17jC8fuISmMHa2CpdDEV6UXBqDsL73flyoPOLNZ wHhA== X-Gm-Message-State: AAQBX9f1xjQugQtx9ZL7vbSn0H7pYK44OX0pEu2G9hMndHHU3j021g0E L5v7QF3itCZco+igD4prJ67qVw== X-Google-Smtp-Source: AKy350Y4civICNM8zr7hd+GNeg3iFkCFRk5nboyltEkmFIyKL8bL8WfrBh55oP9yhCB2QT/73VnYjg== X-Received: by 2002:a17:907:16a8:b0:94f:2d38:896b with SMTP id hc40-20020a17090716a800b0094f2d38896bmr9767703ejc.53.1681811699278; Tue, 18 Apr 2023 02:54:59 -0700 (PDT) Received: from krzk-bin.. ([2a02:810d:15c0:828:a276:7d35:5226:1c77]) by smtp.gmail.com with ESMTPSA id o4-20020a509b04000000b00504d04c939fsm7076578edi.59.2023.04.18.02.54.58 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 18 Apr 2023 02:54:58 -0700 (PDT) From: Krzysztof Kozlowski To: Andy Gross , Bjorn Andersson , Konrad Dybcio , Rob Herring , Krzysztof Kozlowski , Vinod Koul , Bard Liao , Pierre-Louis Bossart , Sanyog Kale , Srinivas Kandagatla , Rao Mandadapu , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org Subject: [PATCH v3 7/7] soundwire: qcom: use tabs for indentation in defines Date: Tue, 18 Apr 2023 11:54:47 +0200 Message-Id: <20230418095447.577001-8-krzysztof.kozlowski@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> References: <20230418095447.577001-1-krzysztof.kozlowski@linaro.org> MIME-Version: 1.0 Message-ID-Hash: JDU2QEZZJQLBKBC465FULC5645CVP57G X-Message-ID-Hash: JDU2QEZZJQLBKBC465FULC5645CVP57G X-MailFrom: krzysztof.kozlowski@linaro.org X-Mailman-Rule-Misses: dmarc-mitigation; no-senders; approved; emergency; loop; banned-address; member-moderation; header-match-alsa-devel.alsa-project.org-0; header-match-alsa-devel.alsa-project.org-1; nonmember-moderation; administrivia; implicit-dest; max-recipients; max-size; news-moderation; no-subject; digests; suspicious-header CC: Krzysztof Kozlowski X-Mailman-Version: 3.3.8 Precedence: list List-Id: "Alsa-devel mailing list for ALSA developers - http://www.alsa-project.org" Archived-At: List-Archive: List-Help: List-Owner: List-Post: List-Subscribe: List-Unsubscribe: Use consistently only tabs to indent the value in defines. Reviewed-by: Srinivas Kandagatla Reviewed-by: Konrad Dybcio Signed-off-by: Krzysztof Kozlowski --- Changes since v2: 1. Add tags. --- drivers/soundwire/qcom.c | 34 +++++++++++++++++----------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c index 90afc8f15b82..aad5942e5980 100644 --- a/drivers/soundwire/qcom.c +++ b/drivers/soundwire/qcom.c @@ -58,9 +58,9 @@ #define SWRM_INTERRUPT_STATUS_SPECIAL_CMD_ID_FINISHED BIT(10) #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_FAILED BIT(11) #define SWRM_INTERRUPT_STATUS_AUTO_ENUM_TABLE_IS_FULL BIT(12) -#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2 BIT(13) -#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2 BIT(14) -#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP BIT(16) +#define SWRM_INTERRUPT_STATUS_BUS_RESET_FINISHED_V2 BIT(13) +#define SWRM_INTERRUPT_STATUS_CLK_STOP_FINISHED_V2 BIT(14) +#define SWRM_INTERRUPT_STATUS_EXT_CLK_STOP_WAKEUP BIT(16) #define SWRM_INTERRUPT_MAX 17 #define SWRM_V1_3_INTERRUPT_MASK_ADDR 0x204 #define SWRM_V1_3_INTERRUPT_CLEAR 0x208 @@ -125,20 +125,20 @@ #define SWRM_REG_VAL_PACK(data, dev, id, reg) \ ((reg) | ((id) << 16) | ((dev) << 20) | ((data) << 24)) -#define MAX_FREQ_NUM 1 -#define TIMEOUT_MS 100 -#define QCOM_SWRM_MAX_RD_LEN 0x1 -#define QCOM_SDW_MAX_PORTS 14 -#define DEFAULT_CLK_FREQ 9600000 -#define SWRM_MAX_DAIS 0xF -#define SWR_INVALID_PARAM 0xFF -#define SWR_HSTOP_MAX_VAL 0xF -#define SWR_HSTART_MIN_VAL 0x0 -#define SWR_BROADCAST_CMD_ID 0x0F -#define SWR_MAX_CMD_ID 14 -#define MAX_FIFO_RD_RETRY 3 -#define SWR_OVERFLOW_RETRY_COUNT 30 -#define SWRM_LINK_STATUS_RETRY_CNT 100 +#define MAX_FREQ_NUM 1 +#define TIMEOUT_MS 100 +#define QCOM_SWRM_MAX_RD_LEN 0x1 +#define QCOM_SDW_MAX_PORTS 14 +#define DEFAULT_CLK_FREQ 9600000 +#define SWRM_MAX_DAIS 0xF +#define SWR_INVALID_PARAM 0xFF +#define SWR_HSTOP_MAX_VAL 0xF +#define SWR_HSTART_MIN_VAL 0x0 +#define SWR_BROADCAST_CMD_ID 0x0F +#define SWR_MAX_CMD_ID 14 +#define MAX_FIFO_RD_RETRY 3 +#define SWR_OVERFLOW_RETRY_COUNT 30 +#define SWRM_LINK_STATUS_RETRY_CNT 100 enum { MASTER_ID_WSA = 1,