From patchwork Wed Feb 22 12:04:07 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 655909 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 86F1CC61DA4 for ; Wed, 22 Feb 2023 12:05:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231777AbjBVMFN (ORCPT ); Wed, 22 Feb 2023 07:05:13 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52314 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231883AbjBVMEs (ORCPT ); Wed, 22 Feb 2023 07:04:48 -0500 Received: from mail-wm1-x32a.google.com (mail-wm1-x32a.google.com [IPv6:2a00:1450:4864:20::32a]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5F21A39BA7 for ; Wed, 22 Feb 2023 04:04:17 -0800 (PST) Received: by mail-wm1-x32a.google.com with SMTP id c18so881718wmr.3 for ; Wed, 22 Feb 2023 04:04:17 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=XUvAJiwYybcfxuPaO1uSIiPaY9bXRmDYQO0thKgpZNw=; b=r3T1NGS2xbgCm1P579P6abmtW9ZORmagwa/lyH0wLO+fViT/fTu7ZYS+6l+zNm7N28 1jazpD2SIs0/z0WJwfoJ5CVjwwwaESL6Ex4PIHwkrc/N3wFtBdjx+c7f4ywJlRtztVKE +z9dGs/BHWICaGg06Hr4aLzk0A7W1ASqTYslkqboTIsqhG/uadz3rEpdH689UUPIBha8 MKodD+masFX8wvlUywb1ljAueQP9o1kNzDcslQN6X8iS1chslk7l5wo/HyuGvmZ0I4zV 57PIMhROoYQYJP1JuD11BrjuP+Qt7rzMutmbuTRVQRXnP75UOc5tQuq7is0jcFK2ImkA UqxA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=XUvAJiwYybcfxuPaO1uSIiPaY9bXRmDYQO0thKgpZNw=; b=cTmB2StkWOxooFoCw1X6lMNd5gYUjpNHwVglBtZP/7z6B9EOMdOI9zCYr3Dy/cdf2i zOIbFGhHCdni9h7PeGxdJPzIjVlERtQlO5XeWzgB3jOq0Zi7RflPsAKmE+iAUl1/W1iE P8O1QK30XDBa4VR6k8wcVewv9EGF8zo4TC3eIcazN66eWgXkEIIAaKtC5++jZuKxf7vX KPKmv2syc9eBTJaHsrJ6bPOxkMn5vn1bDSlAIfgvLbWoWkZ9kPZ6Q1aXNfHbOZ2KuJjC wkrDtbAMz14i1hcLYnAsBKnBzym232j8+b6IguwAzkD88edq44H1bBe2sukmxM9FdWfZ R77w== X-Gm-Message-State: AO0yUKVxZ1AyJM2GgRpU204DHPyJL6WpmdEy2pIshghu59AmbjxcUITu Sv7YcE6gja1LDshR8wCcyK5axg== X-Google-Smtp-Source: AK7set8lHwgBNjGciTX3AiGd/RkanWr9Qiqp500enTF0BXeBJss7YK98J6g8DRq/hGSMzFMj807NOw== X-Received: by 2002:a05:600c:2ac8:b0:3df:eedf:f378 with SMTP id t8-20020a05600c2ac800b003dfeedff378mr5637451wme.24.1677067455884; Wed, 22 Feb 2023 04:04:15 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id o27-20020a05600c511b00b003e21dcccf9fsm8447722wms.16.2023.02.22.04.04.14 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 22 Feb 2023 04:04:15 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net, Krzysztof Kozlowski Subject: [PATCH v6 1/5] dt-bindings: vendor-prefixes: Add Square Date: Wed, 22 Feb 2023 12:04:07 +0000 Message-Id: <20230222120411.55197-2-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230222120411.55197-1-bryan.odonoghue@linaro.org> References: <20230222120411.55197-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add vendor prefix for Square (https://squareup.com). Acked-by: Krzysztof Kozlowski Signed-off-by: Bryan O'Donoghue --- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index ed64e06ecca49..90b746d237d26 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -1251,6 +1251,8 @@ patternProperties: description: SpinalHDL "^sprd,.*": description: Spreadtrum Communications Inc. + "^square,.*": + description: Square "^ssi,.*": description: SSI Computer Corp "^sst,.*": From patchwork Wed Feb 22 12:04:08 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 656191 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 828F8C6379F for ; Wed, 22 Feb 2023 12:05:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231310AbjBVMFl (ORCPT ); Wed, 22 Feb 2023 07:05:41 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52286 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231387AbjBVME5 (ORCPT ); Wed, 22 Feb 2023 07:04:57 -0500 Received: from mail-wr1-x42d.google.com (mail-wr1-x42d.google.com [IPv6:2a00:1450:4864:20::42d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9A1D43A099 for ; Wed, 22 Feb 2023 04:04:19 -0800 (PST) Received: by mail-wr1-x42d.google.com with SMTP id t15so7594817wrz.7 for ; Wed, 22 Feb 2023 04:04:19 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=JwUPEgdQ82KbfV6YBB+rmCT9LerexyWnp/3e1WSaq8o=; b=qXIBsoIGPXdCnu5mqvjT8b2XGu1O6OONvextWZTPR/ZSo0PkN0X1NLZ1meYj9DkOYl Rx2DxvKwhXFb7JkFYKf7y+r+K0maDqTKYrBqIF51/T1UryHz+EVYUgkh+xclXTsMiDlP 1pwdtSHNa8R+tgr0lH2SFhxiE6GkAvb2tL4eKO3ZR7Ce99l0JgOx4wcBqU5Rxvg6kewq kisLVXh2NgEutcq9L5dhxMvlMQzwzJXza/N/w2eR3vAQBCkGIUW7JPjY1bMNKWhRFY8X njz+UmHv3zOebXLGUyvM5p2U6kBjBjjv6hMzShaedwuiKCU6nwnc20c68imoImE2Cr1n W9sA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=JwUPEgdQ82KbfV6YBB+rmCT9LerexyWnp/3e1WSaq8o=; b=e0X28TFBhjwwJNx+Lrxd2boVTEdX9qAXKdHC5KDEhCxgH6d9b1wSdt4BPlgG8cCfDS HbRIEZhySvBa+AVecstEByR/PlisCsWbe5RfRSy3Gh5gM6plT3x0mUUxhpMYdTxYkk0B qAl6xSWdi9m6be0KCdKAtMB8Gf6Y2BlkHHr5pWJy3q4C6LBbw/MElDqJXGRXiA/5tOZU aCPWnJ7oeDA/Myoyu3P3XcsDF9aF93fCFNeEAgjhGIS48ow20BIjWdWEncovzNB5WWod +ihN4rWoG8cFYhAWIh7ApGpoNu1/0PBa5R31yD4NSL6DMNgFd09F23Zm0NW78pDq87se Uo6w== X-Gm-Message-State: AO0yUKXiuaiWu7uvfYkIN/XJZh/sdFPJgA0Dl+KDeSgNGB/u8LKlsl9T LbkvS2PWIMNb2YNT9QaIifg0jg== X-Google-Smtp-Source: AK7set8WiQK+Gl8Za+PzH+kgwzPW1oWMjo1jwEJUkPtoYAXy1tSk3dFxGlOvEIpGlFyoK+MFtzoHqQ== X-Received: by 2002:a5d:468e:0:b0:2c4:3d5:46dc with SMTP id u14-20020a5d468e000000b002c403d546dcmr6258566wrq.37.1677067457739; Wed, 22 Feb 2023 04:04:17 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id o27-20020a05600c511b00b003e21dcccf9fsm8447722wms.16.2023.02.22.04.04.16 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 22 Feb 2023 04:04:17 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net, Jun Nie , James Willcox , Joseph Gates , Max Chen , Zac Crosby , Vincent Knecht Subject: [PATCH v6 2/5] arm64: dts: qcom: Add msm8939 SoC Date: Wed, 22 Feb 2023 12:04:08 +0000 Message-Id: <20230222120411.55197-3-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230222120411.55197-1-bryan.odonoghue@linaro.org> References: <20230222120411.55197-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add msm8939 a derivative SoC of msm8916. This SoC contains a number of key differences to msm8916. - big.LITTLE Octa Core - quad 1.5GHz + quad 1.0GHz - DRAM 1x800 LPDDR3 - Camera 4+4 lane CSI - Venus @ 1080p60 HEVC - DSI x 2 - Adreno A405 - WiFi wcn3660/wcn3680b 802.11ac Co-developed-by: Shawn Guo Signed-off-by: Shawn Guo Co-developed-by: Jun Nie Signed-off-by: Jun Nie Co-developed-by: Benjamin Li Signed-off-by: Benjamin Li Co-developed-by: James Willcox Signed-off-by: James Willcox Co-developed-by: Leo Yan Signed-off-by: Leo Yan Co-developed-by: Joseph Gates Signed-off-by: Joseph Gates Co-developed-by: Max Chen Signed-off-by: Max Chen Co-developed-by: Zac Crosby Signed-off-by: Zac Crosby Co-developed-by: Vincent Knecht Signed-off-by: Vincent Knecht Co-developed-by: Stephan Gerhold Signed-off-by: Stephan Gerhold Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/msm8939.dtsi | 2454 +++++++++++++++++++++++++ 1 file changed, 2454 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8939.dtsi diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi new file mode 100644 index 0000000000000..b7d752c5426f7 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi @@ -0,0 +1,2454 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + + /* + * Stock LK wants address-cells/size-cells = 2 + * A number of our drivers want address/size cells = 1 + * hence the disparity between top-level and /soc below. + */ + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x100>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc0>; + qcom,saw = <&saw0>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU1: cpu@101 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x101>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc1>; + qcom,saw = <&saw1>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU2: cpu@102 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x102>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc2>; + qcom,saw = <&saw2>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU3: cpu@103 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x103>; + next-level-cache = <&L2_1>; + qcom,acc = <&acc3>; + qcom,saw = <&saw3>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs1_mbox>; + #cooling-cells = <2>; + }; + + CPU4: cpu@0 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x0>; + qcom,acc = <&acc4>; + qcom,saw = <&saw4>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + next-level-cache = <&L2_0>; + L2_0: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@1 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x1>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc5>; + qcom,saw = <&saw5>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU6: cpu@2 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x2>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc6>; + qcom,saw = <&saw6>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + CPU7: cpu@3 { + compatible = "arm,cortex-a53"; + device_type = "cpu"; + enable-method = "spin-table"; + reg = <0x3>; + next-level-cache = <&L2_0>; + qcom,acc = <&acc7>; + qcom,saw = <&saw7>; + cpu-idle-states = <&CPU_SLEEP_0>; + clocks = <&apcs0_mbox>; + #cooling-cells = <2>; + }; + + idle-states { + CPU_SLEEP_0: cpu-sleep-0 { + compatible ="qcom,idle-state-spc", "arm,idle-state"; + entry-latency-us = <130>; + exit-latency-us = <150>; + min-residency-us = <2000>; + local-timer-stop; + }; + }; + }; + + /* + * MSM8939 has a big.LITTLE heterogeneous computing architecture, + * consisting of two clusters of four ARM Cortex-A53s each. The + * LITTLE cluster runs at 1.0-1.2GHz, and the big cluster runs + * at 1.5-1.7GHz. + * + * The enable method used here is spin-table which presupposes use + * of a 2nd stage boot shim such as lk2nd to have installed a + * spin-table, the downstream non-psci/non-spin-table method that + * default msm8916/msm8936/msm8939 will not be supported upstream. + */ + cpu-map { + /* LITTLE (efficiency) cluster */ + cluster0 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + + core2 { + cpu = <&CPU6>; + }; + + core3 { + cpu = <&CPU7>; + }; + }; + + /* big (performance) cluster */ + /* Boot CPU is cluster 1 core 0 */ + cluster1 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-msm8916", "qcom,scm"; + clocks = <&gcc GCC_CRYPTO_CLK>, + <&gcc GCC_CRYPTO_AXI_CLK>, + <&gcc GCC_CRYPTO_AHB_CLK>; + clock-names = "core", "bus", "iface"; + #reset-cells = <1>; + + qcom,dload-mode = <&tcsr 0x6100>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = ; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + tz-apps@86000000 { + reg = <0x0 0x86000000 0x0 0x300000>; + no-map; + }; + + smem@86300000 { + compatible = "qcom,smem"; + reg = <0x0 0x86300000 0x0 0x100000>; + no-map; + + hwlocks = <&tcsr_mutex 3>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + }; + + hypervisor@86400000 { + reg = <0x0 0x86400000 0x0 0x100000>; + no-map; + }; + + tz@86500000 { + reg = <0x0 0x86500000 0x0 0x180000>; + no-map; + }; + + reserved@86680000 { + reg = <0x0 0x86680000 0x0 0x80000>; + no-map; + }; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + + rfsa@867e0000 { + reg = <0x0 0x867e0000 0x0 0x20000>; + no-map; + }; + + mpss_mem: mpss@86800000 { + reg = <0x0 0x86800000 0x0 0x5500000>; + no-map; + }; + + wcnss_mem: wcnss@8bd00000 { + reg = <0x0 0x8bd00000 0x0 0x600000>; + no-map; + }; + + venus_mem: venus@8c300000 { + reg = <0x0 0x8c300000 0x0 0x800000>; + no-map; + }; + + mba_mem: mba@8cb00000 { + no-map; + reg = <0x0 0x8cb00000 0x0 0x100000>; + }; + }; + + smd { + compatible = "qcom,smd"; + + rpm { + interrupts = ; + qcom,ipc = <&apcs1_mbox 8 0>; + qcom,smd-edge = <15>; + + rpm_requests: rpm-requests { + compatible = "qcom,rpm-msm8936"; + qcom,smd-channels = "rpm_requests"; + + rpmcc: clock-controller { + compatible = "qcom,rpmcc-msm8936", "qcom,rpmcc"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmpd: power-controller { + compatible = "qcom,msm8939-rpmpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmpd_opp_table>; + + rpmpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmpd_opp_ret: opp1 { + opp-level = <1>; + }; + + rpmpd_opp_svs_krait: opp2 { + opp-level = <2>; + }; + + rpmpd_opp_svs_soc: opp3 { + opp-level = <3>; + }; + + rpmpd_opp_nom: opp4 { + opp-level = <4>; + }; + + rpmpd_opp_turbo: opp5 { + opp-level = <5>; + }; + + rpmpd_opp_super_turbo: opp6 { + opp-level = <6>; + }; + }; + }; + }; + }; + }; + + smp2p-hexagon { + compatible = "qcom,smp2p"; + qcom,smem = <435>, <428>; + + interrupts = ; + + mboxes = <&apcs1_mbox 14>; + + qcom,local-pid = <0>; + qcom,remote-pid = <1>; + + hexagon_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <0>; + #size-cells = <0>; + }; + }; + + smp2p-wcnss { + compatible = "qcom,smp2p"; + qcom,smem = <451>, <431>; + + interrupts = ; + + mboxes = <&apcs1_mbox 18>; + + qcom,local-pid = <0>; + qcom,remote-pid = <4>; + + wcnss_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + + #qcom,smem-state-cells = <1>; + }; + }; + + smsm { + compatible = "qcom,smsm"; + + #address-cells = <1>; + #size-cells = <0>; + + qcom,ipc-1 = <&apcs1_mbox 8 13>; + qcom,ipc-3 = <&apcs1_mbox 8 19>; + + apps_smsm: apps@0 { + reg = <0>; + + #qcom,smem-state-cells = <1>; + }; + + hexagon_smsm: hexagon@1 { + reg = <1>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + wcnss_smsm: wcnss@6 { + reg = <6>; + interrupts = ; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + soc: soc@0 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0 0 0xffffffff>; + + rng@22000 { + compatible = "qcom,prng"; + reg = <0x00022000 0x200>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + qfprom: qfprom@5c000 { + compatible = "qcom,msm8916-qfprom", "qcom,qfprom"; + reg = <0x0005c000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + tsens_caldata: caldata@a0 { + reg = <0xa0 0x5c>; + }; + + tsens_base1: base1@a0 { + reg = <0xa0 0x1>; + bits = <0 8>; + }; + + tsens_s5_p1: s5-p1@a1 { + reg = <0xa1 0x1>; + bits = <0 6>; + }; + + tsens_s5_p2: s5-p2@a1 { + reg = <0xa1 0x2>; + bits = <6 6>; + }; + + tsens_s6_p1: s6-p1@a2 { + reg = <0xa2 0x2>; + bits = <4 6>; + }; + + tsens_s6_p2: s6-p2@a3 { + reg = <0xa3 0x1>; + bits = <2 6>; + }; + + tsens_s7_p1: s7-p1@a4 { + reg = <0xa4 0x1>; + bits = <0 6>; + }; + + tsens_s7_p2: s7-p2@a4 { + reg = <0xa4 0x2>; + bits = <6 6>; + }; + + tsens_s8_p1: s8-p1@a5 { + reg = <0xa5 0x2>; + bits = <4 6>; + }; + + tsens_s8_p2: s8-p2@a6 { + reg = <0xa6 0x1>; + bits = <2 6>; + }; + + tsens_base2: base2@a7 { + reg = <0xa7 0x1>; + bits = <0 8>; + }; + + tsens_mode: mode@d0 { + reg = <0xd0 0x1>; + bits = <0 3>; + }; + + tsens_s0_p1: s0-p1@d0 { + reg = <0xd0 0x2>; + bits = <3 6>; + }; + + tsens_s0_p2: s0-p1@d1 { + reg = <0xd1 0x1>; + bits = <1 6>; + }; + + tsens_s1_p1: s1-p1@d1 { + reg = <0xd1 0x2>; + bits = <7 6>; + }; + + tsens_s1_p2: s1-p2@d2 { + reg = <0xd2 0x2>; + bits = <5 6>; + }; + + tsens_s2_p1: s2-p1@d3 { + reg = <0xd3 0x2>; + bits = <3 6>; + }; + + tsens_s2_p2: s2-p2@d4 { + reg = <0xd4 0x1>; + bits = <1 6>; + }; + + tsens_s3_p1: s3-p1@d4 { + reg = <0xd4 0x2>; + bits = <7 6>; + }; + + tsens_s3_p2: s3-p2@d5 { + reg = <0xd5 0x2>; + bits = <5 6>; + }; + + tsens_s4_p1: s4-p1@d6 { + reg = <0xd6 0x2>; + bits = <3 6>; + }; + + tsens_s4_p2: s4-p2@d7 { + reg = <0xd7 0x1>; + bits = <1 6>; + }; + }; + + rpm_msg_ram: sram@60000 { + compatible = "qcom,rpm-msg-ram"; + reg = <0x00060000 0x8000>; + }; + + bimc: interconnect@400000 { + compatible = "qcom,msm8939-bimc"; + reg = <0x00400000 0x62000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, + <&rpmcc RPM_SMD_BIMC_A_CLK>; + #interconnect-cells = <1>; + }; + + tsens: thermal-sensor@4a9000 { + compatible = "qcom,msm8939-tsens", "qcom,tsens-v0_1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_mode>, + <&tsens_base1>, <&tsens_base2>, + <&tsens_s0_p1>, <&tsens_s0_p2>, + <&tsens_s1_p1>, <&tsens_s1_p2>, + <&tsens_s2_p1>, <&tsens_s2_p2>, + <&tsens_s3_p1>, <&tsens_s3_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s4_p1>, <&tsens_s4_p2>, + <&tsens_s5_p1>, <&tsens_s5_p2>, + <&tsens_s6_p1>, <&tsens_s6_p2>, + <&tsens_s7_p1>, <&tsens_s7_p2>, + <&tsens_s8_p1>, <&tsens_s8_p2>; + nvmem-cell-names = "mode", + "base1", "base2", + "s0_p1", "s0_p2", + "s1_p1", "s1_p2", + "s2_p1", "s2_p2", + "s3_p1", "s3_p2", + "s4_p1", "s4_p2", + "s4_p1", "s4_p2", + "s5_p1", "s5_p2", + "s6_p1", "s6_p2", + "s7_p1", "s7_p2", + "s8_p1", "s8_p2"; + #qcom,sensors = <9>; + interrupts = ; + interrupt-names = "uplow"; + #thermal-sensor-cells = <1>; + }; + + restart@4ab000 { + compatible = "qcom,pshold"; + reg = <0x004ab000 0x4>; + }; + + pcnoc: interconnect@500000 { + compatible = "qcom,msm8939-pcnoc"; + reg = <0x00500000 0x11000>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, + <&rpmcc RPM_SMD_PCNOC_A_CLK>; + #interconnect-cells = <1>; + }; + + snoc: interconnect@580000 { + compatible = "qcom,msm8939-snoc"; + reg = <0x00580000 0x14080>; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, + <&rpmcc RPM_SMD_SNOC_A_CLK>; + #interconnect-cells = <1>; + + snoc_mm: interconnect-snoc { + compatible = "qcom,msm8939-snoc-mm"; + clock-names = "bus", "bus_a"; + clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>, + <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>; + #interconnect-cells = <1>; + }; + }; + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8916-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = ; + gpio-controller; + gpio-ranges = <&tlmm 0 0 122>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp1_uart2_default: blsp1-uart2-default-state { + pins = "gpio4", "gpio5"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + camera_front_default: camera-front-default-state { + pwdn-pins { + pins = "gpio33"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio28"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk1-pins { + pins = "gpio27"; + function = "cam_mclk1"; + drive-strength = <16>; + bias-disable; + }; + }; + + camera_rear_default: camera-rear-default-state { + pwdn-pins { + pins = "gpio34"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + rst-pins { + pins = "gpio35"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + mclk0-pins { + pins = "gpio26"; + function = "cam_mclk0"; + drive-strength = <16>; + bias-disable; + }; + }; + + cci0_default: cci0-default-state { + pins = "gpio29", "gpio30"; + function = "cci_i2c"; + drive-strength = <16>; + bias-disable; + }; + + cdc_pdm_lines_default: pdm-lines-default-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <8>; + bias-disable; + }; + + cdc_pdm_lines_sleep: pdm-lines-suspend-state { + pins = "gpio63", "gpio64", "gpio65", "gpio66", + "gpio67", "gpio68"; + function = "cdc_pdm0"; + drive-strength = <2>; + bias-pull-down; + }; + + cdc_dmic_lines_act: cdc-dmic-lines-on-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <8>; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <8>; + }; + }; + + cdc_dmic_lines_sus: cdc-dmic-lines-off-state { + clk-pins { + pins = "gpio0"; + function = "dmic0_clk"; + drive-strength = <2>; + bias-disable; + }; + + data-pins { + pins = "gpio1"; + function = "dmic0_data"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-mclk-tlmm-lines-state { + ext_mclk_tlmm_lines_act: mclk-lines-on-pins { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_mclk_tlmm_lines_sus: mclk-lines-off-pins { + pins = "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-tlmm-lines-state { + ext_pri_tlmm_lines_act: ext-pa-on-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_pri_tlmm_lines_sus: ext-pa-off-pins { + pins = "gpio113", "gpio114", "gpio115", "gpio116"; + function = "pri_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + ext-pri-ws-line-state { + ext_pri_ws_act: ext-pa-on-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <8>; + bias-disable; + }; + + ext_pri_ws_sus: ext-pa-off-pins { + pins = "gpio110"; + function = "pri_mi2s_ws"; + drive-strength = <2>; + bias-disable; + }; + }; + + /* secondary Mi2S */ + ext-sec-tlmm-lines-state { + ext_sec_tlmm_lines_act: tlmm-lines-on-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <8>; + bias-disable; + }; + + ext_sec_tlmm_lines_sus: tlmm-lines-off-pins { + pins = "gpio112", "gpio117", "gpio118", "gpio119"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-disable; + }; + }; + + i2c1_default: i2c1-default-state { + pins = "gpio2", "gpio3"; + function = "blsp_i2c1"; + drive-strength = <2>; + bias-disable; + }; + + i2c1_sleep: i2c1-sleep-state { + pins = "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_default: i2c2-default-state { + pins = "gpio6", "gpio7"; + function = "blsp_i2c2"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep-state { + pins = "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_default: i2c3-default-state { + pins = "gpio10", "gpio11"; + function = "blsp_i2c3"; + drive-strength = <2>; + bias-disable; + }; + + i2c3_sleep: i2c3-sleep-state { + pins = "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_default: i2c4-default-state { + pins = "gpio14", "gpio15"; + function = "blsp_i2c4"; + drive-strength = <2>; + bias-disable; + }; + + i2c4_sleep: i2c4-sleep-state { + pins = "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_default: i2c5-default-state { + pins = "gpio18", "gpio19"; + function = "blsp_i2c5"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep-state { + pins = "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default-state { + pins = "gpio22", "gpio23"; + function = "blsp_i2c6"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep-state { + pins = "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc1_default_state: sdc1-default-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <10>; + }; + }; + + sdc1_sleep_state: sdc1-sleep-state { + clk-pins { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + }; + + sdc2_default_state: sdc2-default-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <16>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <10>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <10>; + }; + + cd-pins { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + sdc2_sleep_state: sdc2-sleep-state { + clk-pins { + pins = "sdc2_clk"; + bias-disable; + drive-strength = <2>; + }; + + cmd-pins { + pins = "sdc2_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + data-pins { + pins = "sdc2_data"; + bias-pull-up; + drive-strength = <2>; + }; + + cd-pins { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + }; + + spi1_default: spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi1_sleep: spi1-sleep-state { + pins = "gpio0", "gpio1", "gpio2", "gpio3"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi2_default: spi2-default-state { + spi-pins { + pins = "gpio4", "gpio5", "gpio7"; + function = "blsp_spi2"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio6"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi2_sleep: spi2-sleep-state { + pins = "gpio4", "gpio5", "gpio6", "gpio7"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi3_default: spi3-default-state { + spi-pins { + pins = "gpio8", "gpio9", "gpio11"; + function = "blsp_spi3"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio10"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi3_sleep: spi3-sleep-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi4_default: spi4-default-state { + spi-pins { + pins = "gpio12", "gpio13", "gpio15"; + function = "blsp_spi4"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio14"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi4_sleep: spi4-sleep-state { + pins = "gpio12", "gpio13", "gpio14", "gpio15"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi5_default: spi5-default-state { + spi-pins { + pins = "gpio16", "gpio17", "gpio19"; + function = "blsp_spi5"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio18"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi5_sleep: spi5-sleep-state { + pins = "gpio16", "gpio17", "gpio18", "gpio19"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + spi6_default: spi6-default-state { + spi-pins { + pins = "gpio20", "gpio21", "gpio23"; + function = "blsp_spi6"; + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio22"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + + spi6_sleep: spi6-sleep-state { + pins = "gpio20", "gpio21", "gpio22", "gpio23"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + wcnss_pin_a: wcnss-active-state { + pins = "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"; + function = "wcss_wlan"; + drive-strength = <6>; + bias-pull-up; + }; + }; + + gcc: clock-controller@1800000 { + compatible = "qcom,gcc-msm8939"; + reg = <0x01800000 0x80000>; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&sleep_clk>, + <&dsi_phy0 1>, + <&dsi_phy0 0>, + <0>, + <0>, + <0>; + clock-names = "xo", + "sleep_clk", + "dsi0pll", + "dsi0pllbyte", + "ext_mclk", + "ext_pri_i2s", + "ext_sec_i2s"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; + + tcsr_mutex: hwlock@1905000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x01905000 0x20000>; + #hwlock-cells = <1>; + }; + + tcsr: syscon@1937000 { + compatible = "qcom,tcsr-msm8916", "syscon"; + reg = <0x01937000 0x30000>; + }; + + mdss: display-subsystem@1a00000 { + compatible = "qcom,mdss"; + reg = <0x01a00000 0x1000>, + <0x01ac8000 0x3000>; + reg-names = "mdss_phys", "vbif_phys"; + + interrupts = ; + interrupt-controller; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "vsync"; + + power-domains = <&gcc MDSS_GDSC>; + + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + status = "disabled"; + + mdp: display-controller@1a01000 { + compatible = "qcom,mdp5"; + reg = <0x01a01000 0x89000>; + reg-names = "mdp_phys"; + + interrupt-parent = <&mdss>; + interrupts = <0>; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_VSYNC_CLK>; + clock-names = "iface", + "bus", + "core", + "vsync"; + + iommus = <&apps_iommu 4>; + + interconnects = <&snoc_mm MASTER_MDP_PORT0 &bimc SLAVE_EBI_CH0>, + <&snoc_mm MASTER_MDP_PORT1 &bimc SLAVE_EBI_CH0>; + interconnect-names = "mdp0-mem", "mdp1-mem"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mdp5_intf1_out: endpoint { + remote-endpoint = <&dsi0_in>; + }; + }; + + port@1 { + reg = <1>; + mdp5_intf2_out: endpoint { + remote-endpoint = <&dsi1_in>; + }; + }; + }; + }; + + dsi0: dsi@1a98000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01a98000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <4>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE0_CLK>, + <&gcc GCC_MDSS_PCLK0_CLK>, + <&gcc GCC_MDSS_ESC0_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE0_CLK_SRC>, + <&gcc PCLK0_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + + phys = <&dsi_phy0>; + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi0_in: endpoint { + remote-endpoint = <&mdp5_intf1_out>; + }; + }; + + port@1 { + reg = <1>; + dsi0_out: endpoint { + }; + }; + }; + }; + + dsi_phy0: phy@1a98300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01a98300 0xd4>, + <0x01a98500 0x280>, + <0x01a98780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + + dsi1: dsi@1aa0000 { + compatible = "qcom,msm8916-dsi-ctrl", + "qcom,mdss-dsi-ctrl"; + reg = <0x01aa0000 0x25c>; + reg-names = "dsi_ctrl"; + + interrupt-parent = <&mdss>; + interrupts = <5>; + + clocks = <&gcc GCC_MDSS_MDP_CLK>, + <&gcc GCC_MDSS_AHB_CLK>, + <&gcc GCC_MDSS_AXI_CLK>, + <&gcc GCC_MDSS_BYTE1_CLK>, + <&gcc GCC_MDSS_PCLK1_CLK>, + <&gcc GCC_MDSS_ESC1_CLK>; + clock-names = "mdp_core", + "iface", + "bus", + "byte", + "pixel", + "core"; + assigned-clocks = <&gcc BYTE1_CLK_SRC>, + <&gcc PCLK1_CLK_SRC>; + assigned-clock-parents = <&dsi_phy0 0>, + <&dsi_phy0 1>; + phys = <&dsi_phy1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dsi1_in: endpoint { + remote-endpoint = <&mdp5_intf2_out>; + }; + }; + + port@1 { + reg = <1>; + dsi1_out: endpoint { + }; + }; + }; + }; + + dsi_phy1: phy@1aa0300 { + compatible = "qcom,dsi-phy-28nm-lp"; + reg = <0x01aa0300 0xd4>, + <0x01aa0500 0x280>, + <0x01aa0780 0x30>; + reg-names = "dsi_pll", + "dsi_phy", + "dsi_phy_regulator"; + + clocks = <&gcc GCC_MDSS_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "ref"; + + #clock-cells = <1>; + #phy-cells = <0>; + status = "disabled"; + }; + }; + + gpu@1c00000 { + compatible = "qcom,adreno-405.0", "qcom,adreno"; + reg = <0x01c00000 0x10000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + clock-names = "core", + "iface", + "mem", + "mem_iface", + "alt_mem_iface", + "gfx3d", + "rbbmtimer"; + clocks = <&gcc GCC_OXILI_GFX3D_CLK>, + <&gcc GCC_OXILI_AHB_CLK>, + <&gcc GCC_OXILI_GMEM_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_BIMC_GPU_CLK>, + <&gcc GFX3D_CLK_SRC>, + <&gcc GCC_OXILI_TIMER_CLK>; + power-domains = <&gcc OXILI_GDSC>; + operating-points-v2 = <&opp_table>; + iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; + + opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + }; + + opp-465000000 { + opp-hz = /bits/ 64 <465000000>; + }; + + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + }; + + opp-220000000 { + opp-hz = /bits/ 64 <220000000>; + }; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + }; + }; + }; + + apps_iommu: iommu@1ef0000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + reg = <0x01ef0000 0x3000>; + ranges = <0 0x01e20000 0x40000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_APSS_TCU_CLK>; + clock-names = "iface", "bus"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <17>; + + /* mdp_0: */ + iommu-ctx@4000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x4000 0x1000>; + interrupts = ; + }; + + /* venus_ns: */ + iommu-ctx@5000 { + compatible = "qcom,msm-iommu-v1-sec"; + reg = <0x5000 0x1000>; + interrupts = ; + }; + }; + + gpu_iommu: iommu@1f08000 { + compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1"; + ranges = <0 0x1f08000 0x10000>; + clocks = <&gcc GCC_SMMU_CFG_CLK>, + <&gcc GCC_GFX_TCU_CLK>, + <&gcc GCC_GFX_TBU_CLK>; + clock-names = "iface", "bus", "tbu"; + #address-cells = <1>; + #size-cells = <1>; + #iommu-cells = <1>; + qcom,iommu-secure-id = <18>; + + /* gfx3d_user: */ + iommu-ctx@1000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x1000 0x1000>; + interrupts = ; + }; + + /* gfx3d_priv: */ + iommu-ctx@2000 { + compatible = "qcom,msm-iommu-v1-ns"; + reg = <0x2000 0x1000>; + interrupts = ; + }; + }; + + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x400000>, + <0x02c00000 0x400000>, + <0x03800000 0x200000>, + <0x0200a000 0x002100>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = ; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + mpss: remoteproc@4080000 { + compatible = "qcom,msm8916-mss-pil"; + reg = <0x04080000 0x100>, + <0x04020000 0x040>; + + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&hexagon_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "bus", "mem", "xo"; + + power-domains = <&rpmpd MSM8939_VDDMDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&hexagon_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&scm 0>; + reset-names = "mss_restart"; + + qcom,halt-regs = <&tcsr 0x18000 0x19000 0x1a000>; + + status = "disabled"; + + mba { + memory-region = <&mba_mem>; + }; + + mpss { + memory-region = <&mpss_mem>; + }; + + smd-edge { + interrupts = ; + + qcom,smd-edge = <0>; + mboxes = <&apcs1_mbox 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + }; + }; + + sound: sound@7702000 { + compatible = "qcom,apq8016-sbc-sndcard"; + reg = <0x07702000 0x4>, + <0x07702004 0x4>; + reg-names = "mic-iomux", "spkr-iomux"; + status = "disabled"; + }; + + lpass: audio-controller@7708000 { + compatible = "qcom,apq8016-lpass-cpu"; + reg = <0x07708000 0x10000>; + reg-names = "lpass-lpaif"; + interrupts = ; + interrupt-names = "lpass-irq-lpaif"; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, + <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>; + clock-names = "ahbix-clk", + "mi2s-bit-clk0", + "mi2s-bit-clk1", + "mi2s-bit-clk2", + "mi2s-bit-clk3", + "pcnoc-mport-clk", + "pcnoc-sway-clk"; + #sound-dai-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + lpass_codec: audio-codec@771c000 { + compatible = "qcom,msm8916-wcd-digital-codec"; + reg = <0x0771c000 0x400>; + clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, + <&gcc GCC_CODEC_DIGCODEC_CLK>; + clock-names = "ahbix-clk", "mclk"; + #sound-dai-cells = <1>; + }; + + sdhc_1: mmc@7824900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07824900 0x11c>, <0x07824000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC1_BCR>; + mmc-ddr-1_8v; + bus-width = <8>; + non-removable; + status = "disabled"; + }; + + sdhc_2: mmc@7864900 { + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; + reg = <0x07864900 0x11c>, <0x07864000 0x800>; + reg-names = "hc", "core"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "iface", "core", "xo"; + resets = <&gcc GCC_SDCC2_BCR>; + bus-width = <4>; + status = "disabled"; + }; + + blsp_dma: dma-controller@7884000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x07884000 0x23000>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + }; + + blsp1_uart1: serial@78af000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078af000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 0>, <&blsp_dma 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "disabled"; + }; + + blsp1_uart2: serial@78b0000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0x078b0000 0x200>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 2>, <&blsp_dma 3>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; + }; + + blsp_i2c1: i2c@78b5000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_default>; + pinctrl-1 = <&i2c1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi1: spi@78b5000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b5000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 4>, <&blsp_dma 5>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi1_default>; + pinctrl-1 = <&spi1_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c2: i2c@78b6000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi2: spi@78b6000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b6000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 6>, <&blsp_dma 7>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_default>; + pinctrl-1 = <&spi2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c3: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c3_default>; + pinctrl-1 = <&i2c3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi3: spi@78b7000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b7000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 8>, <&blsp_dma 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_default>; + pinctrl-1 = <&spi3_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c4: i2c@78b8000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c4_default>; + pinctrl-1 = <&i2c4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi4: spi@78b8000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b8000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 10>, <&blsp_dma 11>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi4_default>; + pinctrl-1 = <&spi4_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c5: i2c@78b9000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi5: spi@78b9000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078b9000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 12>, <&blsp_dma 13>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi5_default>; + pinctrl-1 = <&spi5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@78ba000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_spi6: spi@78ba000 { + compatible = "qcom,spi-qup-v2.2.1"; + reg = <0x078ba000 0x500>; + interrupts = ; + clocks = <&gcc GCC_BLSP1_QUP6_SPI_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + clock-names = "core", "iface"; + dmas = <&blsp_dma 14>, <&blsp_dma 15>; + dma-names = "tx", "rx"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi6_default>; + pinctrl-1 = <&spi6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb: usb@78d9000 { + compatible = "qcom,ci-hdrc"; + reg = <0x078d9000 0x200>, + <0x078d9200 0x200>; + interrupts = , + ; + clocks = <&gcc GCC_USB_HS_AHB_CLK>, + <&gcc GCC_USB_HS_SYSTEM_CLK>; + clock-names = "iface", "core"; + assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>; + assigned-clock-rates = <80000000>; + resets = <&gcc GCC_USB_HS_BCR>; + reset-names = "core"; + #reset-cells = <1>; + phy_type = "ulpi"; + dr_mode = "otg"; + ahb-burst-config = <0>; + phy-names = "usb-phy"; + phys = <&usb_hs_phy>; + status = "disabled"; + + ulpi { + usb_hs_phy: phy { + compatible = "qcom,usb-hs-phy-msm8916", + "qcom,usb-hs-phy"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; + clock-names = "ref", "sleep"; + resets = <&gcc GCC_USB2A_PHY_BCR>, <&usb 0>; + reset-names = "phy", "por"; + #phy-cells = <0>; + qcom,init-seq = /bits/ 8 <0x0 0x44>, + <0x1 0x6b>, + <0x2 0x24>, + <0x3 0x13>; + }; + }; + }; + + intc: interrupt-controller@b000000 { + compatible = "qcom,msm-qgic2"; + reg = <0x0b000000 0x1000>, <0x0b002000 0x2000>, + <0x0b001000 0x1000>, <0x0b004000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = ; + }; + + apcs1_mbox: mailbox@b011000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b011000 0x1000>; + clocks = <&a53pll_c1>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + assigned-clocks = <&apcs2>; + assigned-clock-rates = <297600000>; + #mbox-cells = <1>; + }; + + a53pll_c1: clock@b016000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b016000 0x40>; + #clock-cells = <0>; + }; + + acc0: clock-controller@b088000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b088000 0x1000>; + }; + + saw0: power-manager@b089000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b089000 0x1000>; + }; + + acc1: clock-controller@b098000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b098000 0x1000>; + }; + + saw1: power-manager@b099000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b099000 0x1000>; + }; + + acc2: clock-controller@b0a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0a8000 0x1000>; + }; + + saw2: power-manager@b0a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0a9000 0x1000>; + }; + + acc3: clock-controller@b0b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b0b8000 0x1000>; + }; + + saw3: power-manager@b0b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b0b9000 0x1000>; + }; + + apcs0_mbox: mailbox@b111000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b111000 0x1000>; + clocks = <&a53pll_c0>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + + a53pll_c0: clock@b116000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b116000 0x40>; + #clock-cells = <0>; + }; + + acc4: clock-controller@b188000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b188000 0x1000>; + }; + + saw4: power-manager@b189000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b189000 0x1000>; + }; + + acc5: clock-controller@b198000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b198000 0x1000>; + }; + + saw5: power-manager@b199000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b199000 0x1000>; + }; + + acc6: clock-controller@b1a8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1a8000 0x1000>; + }; + + saw6: power-manager@b1a9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1a9000 0x1000>; + }; + + acc7: clock-controller@b1b8000 { + compatible = "qcom,kpss-acc-v2"; + reg = <0x0b1b8000 0x1000>; + }; + + saw7: power-manager@b1b9000 { + compatible = "qcom,msm8939-saw2-v3.0-cpu", "qcom,saw2"; + reg = <0x0b1b9000 0x1000>; + }; + + a53pll_cci: clock@b1d0000 { + compatible = "qcom,msm8939-a53pll"; + reg = <0x0b1d0000 0x40>; + #clock-cells = <0>; + }; + + apcs2: mailbox@b1d1000 { + compatible = "qcom,msm8939-apcs-kpss-global", "syscon"; + reg = <0x0b1d1000 0x1000>; + clocks = <&a53pll_cci>, <&gcc GPLL0_VOTE>, <&rpmcc RPM_SMD_XO_CLK_SRC>; + clock-names = "pll", "aux", "ref"; + #clock-cells = <0>; + #mbox-cells = <1>; + }; + + timer@b120000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0b120000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + frame@b121000 { + reg = <0x0b121000 0x1000>, + <0x0b122000 0x1000>; + interrupts = , + ; + frame-number = <0>; + }; + + frame@b123000 { + reg = <0x0b123000 0x1000>; + interrupts = ; + frame-number = <1>; + status = "disabled"; + }; + + frame@b124000 { + reg = <0x0b124000 0x1000>; + interrupts = ; + frame-number = <2>; + status = "disabled"; + }; + + frame@b125000 { + reg = <0x0b125000 0x1000>; + interrupts = ; + frame-number = <3>; + status = "disabled"; + }; + + frame@b126000 { + reg = <0x0b126000 0x1000>; + interrupts = ; + frame-number = <4>; + status = "disabled"; + }; + + frame@b127000 { + reg = <0x0b127000 0x1000>; + interrupts = ; + frame-number = <5>; + status = "disabled"; + }; + + frame@b128000 { + reg = <0x0b128000 0x1000>; + interrupts = ; + frame-number = <6>; + status = "disabled"; + }; + }; + + pronto: remoteproc@a204000 { + compatible = "qcom,pronto-v2-pil", "qcom,pronto"; + reg = <0x0a204000 0x2000>, + <0x0a202000 0x1000>, + <0x0a21b000 0x3000>; + reg-names = "ccu", "dxe", "pmu"; + + interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack"; + + memory-region = <&wcnss_mem>; + + power-domains = <&rpmpd MSM8939_VDDCX>, + <&rpmpd MSM8939_VDDMX>; + power-domain-names = "cx", "mx"; + + qcom,smem-states = <&wcnss_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + + status = "disabled"; + + iris { + compatible = "qcom,wcn3620"; + clocks = <&rpmcc RPM_SMD_RF_CLK2>; + clock-names = "xo"; + }; + + smd-edge { + interrupts = ; + qcom,ipc = <&apcs1_mbox 8 17>; + qcom,smd-edge = <6>; + qcom,remote-pid = <4>; + + label = "pronto"; + + wcnss { + compatible = "qcom,wcnss"; + qcom,smd-channels = "WCNSS_CTRL"; + + qcom,mmio = <&pronto>; + + bluetooth { + compatible = "qcom,wcnss-bt"; + }; + + wifi { + compatible = "qcom,wcnss-wlan"; + + interrupts = , + ; + interrupt-names = "tx", "rx"; + + qcom,smem-states = <&apps_smsm 10>, + <&apps_smsm 9>; + qcom,smem-state-names = "tx-enable", + "tx-rings-empty"; + }; + }; + }; + }; + }; + + thermal_zones: thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 5>; + + trips { + cpu0_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: trip1 { + temperature = <115000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 6>; + + trips { + cpu1_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 7>; + + trips { + cpu2_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 8>; + + trips { + cpu3_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4567-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 9>; + + trips { + cpu4567_alert: trip0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4567_crit: trip1 { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4567_alert>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 3>; + + trips { + gpu_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + + gpu_crit: gpu_crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + modem1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 0>; + + trips { + modem1_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 2>; + + trips { + modem2_alert0: trip-point0 { + temperature = <85000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens 1>; + + trips { + cam_alert0: trip-point0 { + temperature = <75000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = , + , + , + ; + }; +}; From patchwork Wed Feb 22 12:04:09 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 655908 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E6F01C678D5 for ; Wed, 22 Feb 2023 12:05:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231147AbjBVMFn (ORCPT ); Wed, 22 Feb 2023 07:05:43 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52426 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231560AbjBVME6 (ORCPT ); Wed, 22 Feb 2023 07:04:58 -0500 Received: from mail-wm1-x330.google.com (mail-wm1-x330.google.com [IPv6:2a00:1450:4864:20::330]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5B9023A09A for ; Wed, 22 Feb 2023 04:04:21 -0800 (PST) Received: by mail-wm1-x330.google.com with SMTP id j19-20020a05600c1c1300b003e9b564fae9so211382wms.2 for ; Wed, 22 Feb 2023 04:04:21 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=HjzGmXwVljBe8mZ+uk4FOoHWI0FZH42+qdZTdioa4oM=; b=dg0cLvwnI81FQydXJAP1QT6Igrm2ZMqoIHowk2yLzTLcgO5loHyKU3WOiyleoq1wnj UbcIGK41SzGzycBpVL0vn9HLWw3D+6aIjVuWZZ/05O+ovBQavFA8z6zbReitGQD960J/ Qo6/36RY+T5dplCao7mW1yYFL0T3HFZTIykc/4dHRcBTRS/h4zgYWk+iS0v0jPW1R21p JCTQoh7tqGqtPqA+xRubyXzjXpvypnheL9DHDihXDc5IKNLa5sT+tPlGP/NFm3WGz7jG quYLCaIle02Ks4GhrPU/EUCbLHxdgLYpYIexAGPqiqSWV3QDsmLB1vtf9bgsdMAiBRlt D4rw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=HjzGmXwVljBe8mZ+uk4FOoHWI0FZH42+qdZTdioa4oM=; b=PdPZfkD0rRsWUv0qOlQKBJtomhYiJoUnlv+QM3AFCMcnJmVUWVa8Grs67iGSiCX4rk QxTzOZkiWeW7fZoRR3tdR+I5FYHdCqFmqb4oPkF7IHplccZ7aHpgYnG/2uG+pgcx+h6m MmyqovFLhq6zABDUqg20ZdsvdOP9ZserlqjHpk8+Hg1aCCMmBWI1VI7qJCiAJ7EIcjuB KfiSNWk0xByC3rMyuqURg5jRX7pT2I5Xrw/uc3NABMWLM43ZyHIkpHzun1GAkHFP26R3 NdSz06C3jBY+UsPZiJbhBBSZ4RXUX8M4gm6TLkjSRn5Fry1vfAzQ+1DG+5kj2CQn5eSX etuQ== X-Gm-Message-State: AO0yUKWaFzlUKbWf7qp5uRX8b9yvkii8P1mWPV4y3IdmWJgJXALpdqr5 uotmByA98Hjxc5jUE4ZYlG9iLA== X-Google-Smtp-Source: AK7set+kDpJwlxBSGGiGyRlQK7BBY6vJi6N5b8hbXtCv88CsQ51Pc5r7+Oyclp7LudZ4aQ3BdczE/A== X-Received: by 2002:a05:600c:1656:b0:3dc:46f6:e607 with SMTP id o22-20020a05600c165600b003dc46f6e607mr5330283wmn.3.1677067459274; Wed, 22 Feb 2023 04:04:19 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id o27-20020a05600c511b00b003e21dcccf9fsm8447722wms.16.2023.02.22.04.04.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 22 Feb 2023 04:04:19 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net Subject: [PATCH v6 3/5] arm64: dts: qcom: Add msm8939-pm8916.dtsi include Date: Wed, 22 Feb 2023 12:04:09 +0000 Message-Id: <20230222120411.55197-4-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230222120411.55197-1-bryan.odonoghue@linaro.org> References: <20230222120411.55197-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Stephan Gerhold The msm8939-pm8916.dtsi include configures the regulator supplies of MSM8939 used together with PM8916, as recommended by Qualcomm. In rare cases where boards deviate from the recommended design they can just avoid using this include. Signed-off-by: Stephan Gerhold Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi | 82 ++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi diff --git a/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi new file mode 100644 index 0000000000000..18a1b3cca01d6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-pm8916.dtsi @@ -0,0 +1,82 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#include "msm8939.dtsi" +#include "pm8916.dtsi" + +&dsi0 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&dsi1 { + vdda-supply = <&pm8916_l2>; + vddio-supply = <&pm8916_l6>; +}; + +&dsi_phy0 { + vddio-supply = <&pm8916_l6>; +}; + +&dsi_phy1 { + vddio-supply = <&pm8916_l6>; +}; + +&mpss { + pll-supply = <&pm8916_l7>; +}; + +&pronto { + vddpx-supply = <&pm8916_l7>; + + iris { + vddxo-supply = <&pm8916_l7>; + vddrfa-supply = <&pm8916_s3>; + vddpa-supply = <&pm8916_l9>; + vdddig-supply = <&pm8916_l5>; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8916_l8>; + vqmmc-supply = <&pm8916_l5>; +}; + +&sdhc_2 { + vmmc-supply = <&pm8916_l11>; + vqmmc-supply = <&pm8916_l12>; +}; + +&usb_hs_phy { + v1p8-supply = <&pm8916_l7>; + v3p3-supply = <&pm8916_l13>; +}; + +&rpm_requests { + smd_rpm_regulators: regulators { + compatible = "qcom,rpm-pm8916-regulators"; + + /* pm8916_s1 is managed by rpmpd (MSM8939_VDDMDCX) */ + /* pm8916_s2 is managed by rpmpd (MSM8939_VDDCX) */ + pm8916_s3: s3 {}; + pm8916_s4: s4 {}; + + pm8916_l1: l1 {}; + pm8916_l2: l2 {}; + /* pm8916_l3 is managed by rpmpd (MSM8939_VDDMX) */ + pm8916_l4: l4 {}; + pm8916_l5: l5 {}; + pm8916_l6: l6 {}; + pm8916_l7: l7 {}; + pm8916_l8: l8 {}; + pm8916_l9: l9 {}; + pm8916_l10: l10 {}; + pm8916_l11: l11 {}; + pm8916_l12: l12 {}; + pm8916_l13: l13 {}; + pm8916_l14: l14 {}; + pm8916_l15: l15 {}; + pm8916_l16: l16 {}; + pm8916_l17: l17 {}; + pm8916_l18: l18 {}; + }; +}; From patchwork Wed Feb 22 12:04:10 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 656190 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C7778C6FA9D for ; Wed, 22 Feb 2023 12:05:45 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229901AbjBVMFo (ORCPT ); Wed, 22 Feb 2023 07:05:44 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52298 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231697AbjBVMFB (ORCPT ); Wed, 22 Feb 2023 07:05:01 -0500 Received: from mail-wm1-x335.google.com (mail-wm1-x335.google.com [IPv6:2a00:1450:4864:20::335]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D46803A096 for ; Wed, 22 Feb 2023 04:04:22 -0800 (PST) Received: by mail-wm1-x335.google.com with SMTP id m14-20020a7bce0e000000b003e00c739ce4so5171356wmc.5 for ; Wed, 22 Feb 2023 04:04:22 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=D/NKAfflQl/jyYjx4Ez6hYiZ6cPOKxCvhtzlfKNfvOQ=; b=uYM69N337V4FU35NL8AtsHRt0LJbCjz5DCbzXcswDNDxEVNcMLvs+KMOWxWAUXP9j9 RWxQ08RBPtULvV0o/SB92LGCO2xZQ70BPOiLsN812QVuULah9SG5iGp6DS0w0Afn4AIV VOaRK6Gr/DISHeXw9YeYScWRtTZLvPzfnLhZt77GEORu7W/Ziflo3aCwsLkAMn7hu7Bp +Mzq3WNJFxj3aODF8guACejgB6K5T2BeKqs0FoZFaQ3FZievgoy6rFm8NNM2B3MQnrgK 9i2e4ENpMJ1U6hRf9tp2zgdTadAitL3nuyRONBjbC2cYdTRlsN0B0HFnZeJr/HXJwSbS ncTg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=D/NKAfflQl/jyYjx4Ez6hYiZ6cPOKxCvhtzlfKNfvOQ=; b=08Gm1Tw6Jqrfgx01LJe+ALzGuGJuLVg1lt9u2ln0ximgah8equ3r653Mu8r/qvJ7+I 8fqEgIrJ+wtW2eAlrS8h0MhTpQc9ZSd8A41JEcm6nn/T8kJl2XiYAG6oerBWivgncoHV t5RxwN84iwLFtggti6nD9Dlr3FHVXbrzDqjnJrOOzSfNAoJcs9HwAZWF2b2t0o1T5qmL G4vDrbnw2AOl9Pn2UlnZJZCJ4ZHOKP+2PixaRqeanvmEXZV1XKFC7hM4E6rgp3A9YbEZ LVCouYnICDRNkqAvAjJYkJoVIrHjUKSh4wy3+uKLhkS4ZCfUC7uZvZyy0vLJW+jvo5kl AYkg== X-Gm-Message-State: AO0yUKUO4luGoZCdeR1XbV7kay+OvP1hMEdbanCzC9VkEs0LrakA8d/l J7bLym8c2d7perwT1aJnxPxw5Q== X-Google-Smtp-Source: AK7set+e/f+BD5zyqqo/TpDlJ6TE7zUgLxetqcXzcGXx0T7oaLJ/3i4UPG4pM5iITpxNiDrZkvLI9A== X-Received: by 2002:a05:600c:3316:b0:3dc:42e7:f626 with SMTP id q22-20020a05600c331600b003dc42e7f626mr5380025wmp.26.1677067461168; Wed, 22 Feb 2023 04:04:21 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id o27-20020a05600c511b00b003e21dcccf9fsm8447722wms.16.2023.02.22.04.04.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 22 Feb 2023 04:04:20 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net, Jun Nie , James Willcox , Joseph Gates , Max Chen , Zac Crosby Subject: [PATCH v6 4/5] arm64: dts: qcom: Add Square apq8039-t2 board Date: Wed, 22 Feb 2023 12:04:10 +0000 Message-Id: <20230222120411.55197-5-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230222120411.55197-1-bryan.odonoghue@linaro.org> References: <20230222120411.55197-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org The apq8039-t2 is an apq8039 based board paired with a wcn3680b WiFi chipset. Co-developed-by: Shawn Guo Signed-off-by: Shawn Guo Co-developed-by: Jun Nie Signed-off-by: Jun Nie Co-developed-by: Benjamin Li Signed-off-by: Benjamin Li Co-developed-by: James Willcox Signed-off-by: James Willcox Co-developed-by: Leo Yan Signed-off-by: Leo Yan Co-developed-by: Joseph Gates Signed-off-by: Joseph Gates Co-developed-by: Max Chen Signed-off-by: Max Chen Co-developed-by: Zac Crosby Signed-off-by: Zac Crosby Reviewed-by: Konrad Dybcio Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/apq8039-t2.dts | 550 ++++++++++++++++++++++++ 2 files changed, 551 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/apq8039-t2.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 31aa54f0428c3..2983e83a19061 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -1,5 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb +dtb-$(CONFIG_ARCH_QCOM) += apq8039-t2.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8094-sony-xperia-kitakami-karin_windy.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-ifc6640.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8039-t2.dts b/arch/arm64/boot/dts/qcom/apq8039-t2.dts new file mode 100644 index 0000000000000..6ff044bfe2ebc --- /dev/null +++ b/arch/arm64/boot/dts/qcom/apq8039-t2.dts @@ -0,0 +1,550 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2020-2023, Linaro Ltd. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include +#include +#include +#include + +/ { + model = "Square, Inc. T2 Devkit"; + compatible = "square,apq8039-t2", "qcom,msm8939"; + + qcom,board-id = <0x53 0x54>; + qcom,msm-id = , , ; + + aliases { + mmc0 = &sdhc_1; + mmc1 = &sdhc_2; + serial0 = &blsp1_uart1; + serial1 = &blsp1_uart2; + }; + + bl: backlight { + compatible = "gpio-backlight"; + pinctrl-0 = <&pinctrl_backlight>; + pinctrl-names = "default"; + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; + + vreg_lcd_avdd_reg: lcd-avdd-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avdd"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avdd_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 86 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_avee_reg: lcd-avee-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_avee"; + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + pinctrl-0 = <&pinctrl_lcd_avee_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_lcd_iovcc_reg: lcd-iovcc-regulator { + compatible = "regulator-fixed"; + regulator-name = "lcd_iovcc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + pinctrl-0 = <&pinctrl_lcd_iovcc_reg>; + pinctrl-names = "default"; + gpio = <&tlmm 9 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + }; + + vreg_pp_crq_3v3_reg: pp-crq-3v3-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&tlmm_crq_reg>; + pinctrl-names = "default"; + regulator-name = "pp_crq_3v3"; + gpio = <&tlmm 12 GPIO_ACTIVE_HIGH>; + startup-delay-us = <0>; + enable-active-high; + }; + + vreg_pp_spe_3v3_reg: pp-spe-3v3-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&tlmm_spe_reg>; + pinctrl-names = "default"; + regulator-name = "pp_spe_3v3"; + gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>; + startup-delay-us = <0>; + enable-active-high; + }; +}; + +&blsp_i2c1 { + status = "okay"; +}; + +&blsp_i2c2 { + status = "okay"; +}; + +&blsp_i2c3 { + status = "okay"; + + typec_pd: usb-pd@38 { + compatible = "ti,tps6598x"; + reg = <0x38>; + + interrupt-parent = <&tlmm>; + interrupts = <107 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "irq"; + + pinctrl-names = "default"; + pinctrl-0 = <&typec_irq>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + typec_ep: endpoint { + remote-endpoint = <&otg_ep>; + }; + }; + }; + }; +}; + +&blsp_i2c5 { + status = "okay"; +}; + +&blsp1_uart1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart1_default>; + pinctrl-1 = <&blsp1_uart1_sleep>; + status = "okay"; +}; + +&blsp1_uart2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "okay"; +}; + +&lpass { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&pm8916_gpios { + gpio-line-names = + "PM_GPIO1", /* WIFI_GPIO1_PRE */ + "PM_GPIO2", /* WIFI_GPIO2_PRE */ + "PM_GPIO3", + "PM_GPIO4"; +}; + +&pronto { + pinctrl-names = "default"; + pinctrl-0 = <&wcnss_pin_a>; + status = "okay"; + + iris { + compatible = "qcom,wcn3680"; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + /* l1 is fixed to 1225000, but not connected in schematic */ + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + status = "okay"; +}; + +&sound { + model = "apq8039-square-sndcard"; + audio-routing = "AMIC2", "MIC BIAS Internal2"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cdc_pdm_lines_default>; + pinctrl-1 = <&cdc_pdm_lines_sleep>; + + internal-codec-playback-dai-link { + link-name = "WCD"; + cpu { + sound-dai = <&lpass MI2S_PRIMARY>; + }; + codec { + sound-dai = <&lpass_codec 0>, <&wcd_codec 0>; + }; + }; + + internal-codec-capture-dai-link { + link-name = "WCD-Capture"; + cpu { + sound-dai = <&lpass MI2S_TERTIARY>; + }; + codec { + sound-dai = <&lpass_codec 1>, <&wcd_codec 1>; + }; + }; +}; + +/* + * Line names are taken from the schematic of T2, Ver X03. + * July 14, 2018. Page 4 in particular. + */ +&tlmm { + gpio-line-names = + "APQ_UART1_TX", /* GPIO_0 */ + "APQ_UART1_RX", + "APQ_I2C1_SDA", + "APQ_I2C1_SCL", + "APQ_UART2_TX_1V8", + "APQ_UART2_RX_1V8", + "APQ_I2C2_SDA", + "APQ_I2C2_SCL", + "NC", + "APQ_LCD_IOVCC_EN", + "APQ_I2C3_SDA", /* GPIO_10 */ + "APQ_I2C3_SCL", + "TOUCH_RST_1V8_L", + "NC", + "APQ_I2C4_SDA", + "APQ_I2C4_SCL", + "APQ_ID5", + "USB_DISCONNECT", + "APQ_I2C5_SDA", + "APQ_I2C5_SCL", + "APQ_USBC_SPI_MOSI", /* GPIO_20 */ + "APQ_USBC_SPI_MISO", + "APQ_USBC_SPI_SS_L", + "APQ_USBC_SPI_CLK", + "APQ_LCD_TE0", + "APQ_LCD_RST_L", + "NC", + "NC", + "ACCELEROMETER_INT1", + "APQ_CAM_I2C0_SDA", + "APQ_CAM_I2C0_SCL", /* GPIO_30 */ + "ACCELEROMETER_INT2", + "NC", + "NC", + "NC", + "APQ_K21_RST_1V8_L", + "NC", + "APQ_EDL_1V8", + "TP145", + "BT_SSBI", + "NC", /* GPIO_40 */ + "NC", + "NC", + "NC", + "NC", + "NC", + "NC", + "BT_CTRL", + "BT_DAT", + "PWR_GPIO_IN", + "PWR_GPIO_OUT", /* GPIO_50 */ + "CARD_DET_MLB_L", + "HALL_SENSOR", + "TP63", + "TP64", + "TP65", + "NC", + "NC", + "NC", + "NC", + "NC", /* GPIO_60 */ + "NC", + "APQ_K21_GPIO0_1V8", + "CDC_PDM_CLK", + "CDC_PDM_SYNC", + "CDC_PDM_TX", + "CDC_PDM_RX0", + "CDC_PDM_RX1", + "CDC_PDM_RX2", + "APQ_K21_GPIO1_1V8", + "NC", /* GPIO_70 */ + "APQ_HUB_SEL_1V8", + "APQ_K21_GPIO2_1V8", + "APQ_K21_GPIO3_1V8", + "APQ_ID0", + "APQ_ID1", + "APQ_ID2", + "APQ_ID3", + "APQ_ID4", + "APQ_HUB_SUSP_IND", + "BOOT_CONFIG_0", /* GPIO_80 */ + "BOOT_CONFIG_1", + "BOOT_CONFIG_2", + "BOOT_CONFIG_3", + "NC", + "NC", + "APQ_LCD_AVDD_EN", + "APQ_LCD_AVEE_EN", + "TP70", + "NC", + "APQ_DEBUG0", /* GPIO_90 */ + "APQ_DEBUG1", + "APQ_DEBUG2", + "APQ_DEBUG3", + "TP165", + "NC", + "APQ_LNA_PWR_EN", + "NC", + "APQ_LCD_BL_EN", + "NC", + "APQ_LCD_ID0", /* GPIO_100 */ + "APQ_LCD_ID1", + "USBC_GPIO5_1V8", + "NC", + "NC", + "NC", + "APQ_HUB_RST_1V8_L", + "USBC_I2C_IRQ_1V8_L", + "SPE_PWR_EN", + "NC", + "APQ_USB_ID", /* GPIO_110 */ + "APQ_EXT_BUCK_VSEL", + "APQ_USB_ID_OUT", + "NC", + "PRNT_RST_L", + "APQ_CRQ_I2C_RDY_1V8", + "TYPEC_RST_1V8_H", + "CHG_BACKPWR_EN", + "CHG_PROCHOT_L", + "NC", + "USBC_GPIO7_1V8", /* GPIO_120 */ + "NC"; + + blsp1_uart1_default: blsp1-uart1-default-state { + pins = "gpio0", "gpio1"; + function = "blsp_uart1"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart1_sleep: blsp1-uart1-sleep-state { + pins = "gpio0", "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + ext_buck_vsel_reg: ext-buck-vsel-reg-state { + function = "gpio"; + pins = "gpio111"; + drive-strength = <2>; + }; + + pinctrl_backlight: backlight-state { + pins = "gpio98"; + function = "gpio"; + }; + + pinctrl_lcd_avdd_reg: lcd-avdd-reg-state { + pins = "gpio86"; + function = "gpio"; + }; + + pinctrl_lcd_avee_reg: lcd-avee-reg-state { + pins = "gpio87"; + function = "gpio"; + }; + + pinctrl_lcd_iovcc_reg: lcd-iovcc-reg-state { + pins = "gpio9"; + function = "gpio"; + }; + + pinctrl_lcd_rst: lcd-rst-state { + pins = "gpio25"; + function = "gpio"; + }; + + pinctrl_otg_default: otg-default-state { + function = "gpio"; + pins = "gpio17"; + output-high; + }; + + pinctrl_otg_device: otg-device-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + pinctrl_otg_host: otg-host-state { + function = "gpio"; + pins = "gpio17"; + output-low; + }; + + sq_spe_enable: sq-spe-enable-state { + pins = "gpio35"; + function = "gpio"; + output-low; + }; + + tlmm_crq_reg: tlmm-crq-reg-state { + function = "gpio"; + pins = "gpio12"; + output-high; + }; + + tlmm_spe_reg: tlmm-spe-reg-state { + pins = "gpio108"; + function = "gpio"; + output-high; + }; + + typec_irq: typec-irq-state { + function = "gpio"; + pins = "gpio107"; + bias-pull-up; + input-enable; + }; +}; + +&usb { + pinctrl-names = "default", "host", "device"; + pinctrl-0 = <&pinctrl_otg_default>; + pinctrl-1 = <&pinctrl_otg_host>; + pinctrl-2 = <&pinctrl_otg_device>; + pin-switch-delay-us = <100000>; + usb-role-switch; + status = "okay"; + + port { + otg_ep: endpoint { + remote-endpoint = <&typec_ep>; + }; + }; +}; + +&wcd_codec { + qcom,hphl-jack-type-normally-open; + qcom,mbhc-vthreshold-low = <75 150 237 450 500>; + qcom,mbhc-vthreshold-high = <75 150 237 450 500>; + status = "okay"; +}; From patchwork Wed Feb 22 12:04:11 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bryan O'Donoghue X-Patchwork-Id: 655907 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 67964C6FD18 for ; Wed, 22 Feb 2023 12:05:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231567AbjBVMFp (ORCPT ); Wed, 22 Feb 2023 07:05:45 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52180 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231710AbjBVMFC (ORCPT ); Wed, 22 Feb 2023 07:05:02 -0500 Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com [IPv6:2a00:1450:4864:20::32d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 83FA23A0AE for ; Wed, 22 Feb 2023 04:04:24 -0800 (PST) Received: by mail-wm1-x32d.google.com with SMTP id o14so5823030wms.1 for ; Wed, 22 Feb 2023 04:04:24 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to; bh=G/tJ2JMtTtWdrvRORgn45WjOaYptTrhld5Ae5l8mf8Y=; b=zd37dD/y6/90tOjmHv/IMzqn3bfjhlJzajgQ4iUiOFJVeWHB8Gl+MSF1TIVp3qDgIv DrOx58WZVVD91y4eLQcwE0uexElRYkKI6XTr5dl4ZydykWe9jIz9ZZVPpvnlcyEkUGgw jcPaGF+RFfAJPrVM6M1jZ6fbIn7QJcWu7xvVQsc5CCakQb+6WajNFIzI86OEny8sLyD5 84vPXAXhrFwyqVtXpl8ImZDbis7HljMckmcQxJul/nZeu1X2G2aqvhlz4QJBxYkzDn6d kH5K48xSYH0sSoDaFbpYi3dKoYG1pXLRcLYSVqANou40PYBuPEoC71l+59Fo7zHuh63v QLdg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=G/tJ2JMtTtWdrvRORgn45WjOaYptTrhld5Ae5l8mf8Y=; b=UW6UvndWTW/pyWriA5IRQZiK4VMR8oc46AK31WEUM8C9Y3laaXqo995VLON5B2Wb0H LHwQUVFVF4RYbGz2uhS7j3quVvtDr3wjnrfEL7egmjY4sN9bo2Kmq/I7LJ8Xq1+95hsx 7AHGUPF60x2xYediiiRv+ps95aoLhBOT0fHl+U2e5iyAYjq9RZv13Yrtt3gkAwjfTF48 C+JfOMBY8/xQMZRbV5IO6WuZhW8KZMjVxPmpEoRsrNthICWH2+ac2mzsFwt9mp2Ra+ch gKR4pompsZ3/zfMek2ZgzfpwaFFzcnQB+xnYC0EcHjBbWmKTQ2YZIwzuV+JLOiwqo1bW cVyA== X-Gm-Message-State: AO0yUKX6Jb1XH68enIgTf07Y4yDA+mRflqARydzogJ9Ocn9P2rSBz+Dq HjJld1+RjMle0tXsmm5JfaXobw== X-Google-Smtp-Source: AK7set962qevwX6vz+Ko3a2VfC9xKMIIiysXs3OLv/F3ex27CMOwdB4nF7h3GBs0SDsuIZ0LwfFRnQ== X-Received: by 2002:a05:600c:16c7:b0:3de:e8c5:d826 with SMTP id l7-20020a05600c16c700b003dee8c5d826mr252196wmn.28.1677067462726; Wed, 22 Feb 2023 04:04:22 -0800 (PST) Received: from sagittarius-a.chello.ie (188-141-3-169.dynamic.upc.ie. [188.141.3.169]) by smtp.gmail.com with ESMTPSA id o27-20020a05600c511b00b003e21dcccf9fsm8447722wms.16.2023.02.22.04.04.21 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 22 Feb 2023 04:04:22 -0800 (PST) From: Bryan O'Donoghue To: agross@kernel.org, andersson@kernel.org, konrad.dybcio@linaro.org, djakov@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org Cc: bryan.odonoghue@linaro.org, linux-arm-msm@vger.kernel.org, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, benl@squareup.com, shawn.guo@linaro.org, fabien.parent@linaro.org, leo.yan@linaro.org, dmitry.baryshkov@linaro.org, stephan@gerhold.net Subject: [PATCH v6 5/5] arm64: dts: qcom: Add msm8939 Sony Xperia M4 Aqua Date: Wed, 22 Feb 2023 12:04:11 +0000 Message-Id: <20230222120411.55197-6-bryan.odonoghue@linaro.org> X-Mailer: git-send-email 2.39.1 In-Reply-To: <20230222120411.55197-1-bryan.odonoghue@linaro.org> References: <20230222120411.55197-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org Add a basic booting DTS for the Sony Xperia M4 Aqua aka "tulip". Tulip is paired with: - wcn3660 - smb1360 battery charger - 720p Truly NT35521 Panel Reviewed-by: Konrad Dybcio Signed-off-by: Bryan O'Donoghue --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../qcom/msm8939-sony-xperia-kanuti-tulip.dts | 457 ++++++++++++++++++ 2 files changed, 458 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 2983e83a19061..81a38d46deba5 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts new file mode 100644 index 0000000000000..c646fada11a5a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8939-sony-xperia-kanuti-tulip.dts @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2022-2023, Bryan O'Donoghue. + * + */ + +/dts-v1/; + +#include "msm8939.dtsi" +#include "msm8939-pm8916.dtsi" +#include +#include +#include + +/ { + model = "Sony Xperia M4 Aqua"; + compatible = "sony,kanuti-tulip", "qcom,msm8939"; + + qcom,board-id = <8 0>; + qcom,msm-id = , ; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_negative5_reg: negative5-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&negative5_reg_default>; + pinctrl-names = "default"; + regulator-name = "negative5_reg"; + gpio = <&tlmm 17 GPIO_ACTIVE_LOW>; + startup-delay-us = <0>; + }; + + vreg_positive5_reg: positive5-regulator { + compatible = "regulator-fixed"; + pinctrl-0 = <&positive5_reg_default>; + pinctrl-names = "default"; + regulator-name = "positive5_reg"; + gpio = <&tlmm 114 GPIO_ACTIVE_LOW>; + startup-delay-us = <0>; + }; + + usb_id: usb-id { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 110 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&usb_id_default>; + pinctrl-names = "default"; + }; +}; + +&dsi0 { + status = "okay"; + + panel@0 { + compatible = "sony,tulip-truly-nt35521"; + reg = <0>; + positive5-supply = <&vreg_positive5_reg>; + negative5-supply = <&vreg_negative5_reg>; + reset-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>; + enable-gpios = <&tlmm 10 GPIO_ACTIVE_LOW>; + + ports { + port { + panel_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + + }; +}; + +&dsi0_out { + remote-endpoint = <&panel_in>; + data-lanes = <0 1 2 3>; +}; + +&dsi_phy0 { + qcom,dsi-phy-regulator-ldo-mode; + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&tlmm { + ak8963_default: ak8963-default-state { + pins = "gpio69"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + ak8963_sleep: ak8963-sleep-state { + pins = "gpio69"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + /* Ambient light and proximity sensor apds9930 and apds9900 */ + apds99xx_default: apds99xx-default-state { + pins = "gpio113"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + apds99xx_sleep: apds99xx-sleep-state { + pins = "gpio113"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + cam_sensor_flash_default: cam-sensor-flash-default-state { + pins = "gpio98", "gpio97"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default-state { + pins = "gpio31", "gpio32"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cdc_ext_spk_pa_active: cdc-ext-spk-pa-on-state { + pins = "gpio0"; + function = "gpio"; + drive-strength = <8>; + output-low; + }; + + cdc_ext_spk_pa_sus: cdc-ext-spk-pa-off-state { + pins = "gpio0"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cdc_slim_lines_act: lines-on-state { + pins = "gpio63"; + function = "cdc_pdm0"; + drive-strength = <8>; + output-high; + }; + + cdc_slim_lines_sus: lines-off-state { + pins = "gpio63"; + function = "cdc_pdm0"; + bias-disable; + drive-strength = <2>; + }; + + cross_conn_det_act: lines-on-state { + pins = "gpio120"; + function = "gpio"; + bias-pull-down; + drive-strength = <8>; + output-low; + }; + + cross_conn_det_sus: lines-off-state { + pins = "gpio120"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + ext_buck_vsel: vsel0-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + }; + + ext_cdc_tlmm_lines_act: tlmm-lines-on-state { + pins = "gpio116", "gpio112", "gpio117", "gpio118", "gpio119"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; + + ext_cdc_tlmm_lines_sus: tlmm-lines-off-state { + pins = "gpio116", "gpio112", "gpio117", "gpio118", "gpio119"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + gpio_key_suspend: gpio-key-suspend-state { + pins = "gpio107", "gpio108", "gpio109"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + negative5_reg_default: negative5-reg-default-state { + pins = "gpio17"; + function = "gpio"; + output-low; + }; + + positive5_reg_default: positive5-reg-default-state { + pins = "gpio114"; + function = "gpio"; + output-low; + }; + + /* Gyroscope and accelerometer sensor combo */ + mpu6050_default: mpu6050-default-state { + pins = "gpio115"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + mpu6050_sleep: mpu6050-sleep-state { + pins = "gpio115"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + nfc_disable_active: nfc-disable-active-state { + pins = "gpio20"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + nfc_disable_suspend: nfc-disable-suspend-state { + pins = "gpio20"; + function = "gpio"; + bias-disable; + drive-strength = <6>; + }; + + nfc_int_active: nfc-int-active-state { + pins = "gpio21"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + nfc_int_suspend: nfc-int-suspend-state { + pins = "gpio21"; + function = "gpio"; + bias-pull-up; + drive-strength = <6>; + }; + + nt35521_te_default: nt35521-te-default-state { + pins = "gpio24"; + function = "gpio"; + bias-pull-down; + drive-strength = <6>; + }; + + nt35521_backlight: nt35521-backlight-default-state { + pins = "gpio10"; + function = "gpio"; + bias-pull-down; + drive-strength = <6>; + }; + + smb_int: smb-int-default-state { + pins = "gpio62"; + function = "gpio"; + bias-pull-up; + drive-strength = <2>; + }; + + ts_int_active: ts-int-active-state { + pins = "gpio13"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + + ts_int_suspend: ts-int-suspend-state { + pins = "gpio13"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + ts_reset_active: ts-reset-active-state { + pins = "gpio12"; + function = "gpio"; + bias-pull-up; + drive-strength = <16>; + }; + + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio12"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + ts_release: ts-release-default-state { + pins = "gpio13", "gpio12"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + usb_id_default: usb-id-default-state { + pins = "gpio110"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; +}; + +&pronto { + status = "okay"; + + iris { + compatible = "qcom,wcn3660"; + }; +}; + +&smd_rpm_regulators { + vdd_l1_l2_l3-supply = <&pm8916_s3>; + vdd_l4_l5_l6-supply = <&pm8916_s4>; + vdd_l7-supply = <&pm8916_s4>; + + pm8916_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8916_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2100000>; + }; + + pm8916_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8916_l4: l4 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8916_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8916_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8916_l8: l8 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2900000>; + }; + + pm8916_l9: l9 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l10: l10 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l11: l11 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8916_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8916_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8916_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8916_l18: l18 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc1_default_state>; + pinctrl-1 = <&sdc1_sleep_state>; + pinctrl-names = "default", "sleep"; + status = "okay"; +}; + +&sdhc_2 { + pinctrl-0 = <&sdc2_default_state>; + pinctrl-1 = <&sdc2_sleep_state>; + pinctrl-names = "default", "sleep"; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usb { + extcon = <&usb_id>, <&usb_id>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&usb_id>; +};