From patchwork Sat Dec 17 19:15:04 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Kumaravel Thiagarajan X-Patchwork-Id: 635384 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C7DD2C4332F for ; Sat, 17 Dec 2022 06:40:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229950AbiLQGkf (ORCPT ); Sat, 17 Dec 2022 01:40:35 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50370 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230145AbiLQGk3 (ORCPT ); Sat, 17 Dec 2022 01:40:29 -0500 Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.154.123]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EAD0C67DA1; Fri, 16 Dec 2022 22:40:27 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1671259228; x=1702795228; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=ZO1lkAXUoRuziw9YZwoPMSZJwRO3K1VPLK1qr7OIeyE=; b=xWXnlcidpjeqKCgdGfNLUGQFRycck6iJPFT0UJy9XxyLioxduAGuUSr/ gGodcqaSq94oe9i06wV42rSo/xFMxfRknYWIDpP0IMrDKk3EXGkYLGEHT 1mCeK6Ie6Fjvibi0e/4dSHhwLi7/u1+8dXrFPM7OZauByOpgEwWyL2pOe 9OYlcTHrp/nxpQJlZNhdq/oPV7LGiJZ9nmcdPWOuznwP+vMd6mNJOTKpG n+ITk87YakoxHJbUi+iTeY6m0O/DOLfVKlOso2SPTCT/dsw3rCKFFzSn9 XsIErZ6oEG08BkXpfUB7buqx2dnDu70Jh6mJfB8RANRw1eanj6pcJKXyu A==; X-IronPort-AV: E=Sophos;i="5.96,252,1665471600"; d="scan'208";a="192133246" Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa2.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 16 Dec 2022 23:40:26 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.16; Fri, 16 Dec 2022 23:40:26 -0700 Received: from CHE-LT-UNGSOFTWARE.microchip.com (10.10.115.15) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.16 via Frontend Transport; Fri, 16 Dec 2022 23:40:20 -0700 From: Kumaravel Thiagarajan To: CC: , , , , , , , , , , , , , , , , , Tharun Kumar P Subject: [PATCH v10 tty-next 1/4] serial: 8250_pci: Add serial8250_pci_setup_port definition in 8250_pcilib.c Date: Sun, 18 Dec 2022 00:45:04 +0530 Message-ID: <20221217191507.2359029-2-kumaravel.thiagarajan@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> References: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org Move implementation of setup_port func() to serial8250_pci_setup_port. Co-developed-by: Tharun Kumar P Signed-off-by: Tharun Kumar P Signed-off-by: Kumaravel Thiagarajan Reviewed-by: Ilpo Järvinen Reviewed-by: Andy Shevchenko --- Changes in v10: - No Change Changes in v9: - Added License in 8250_pcilib.c file Changes in v8: - Moved SERIAL_8250_PCILIB above 8250_PCI Changes in v7: - Used namespace 'SERIAL_8250_PCI' while exporting and importing symbols - Included structures used in function declaration in 8250_pcilib.h file Changes in v6: - Made this patch first patch of the patch series Changes in v5: - This is the new patch added in v5 version of this patchset - Moved implementation of setup_port from 8250_pci.c to 8250_pcilib.c --- drivers/tty/serial/8250/8250_pci.c | 25 +++-------------- drivers/tty/serial/8250/8250_pcilib.c | 39 +++++++++++++++++++++++++++ drivers/tty/serial/8250/8250_pcilib.h | 15 +++++++++++ drivers/tty/serial/8250/Kconfig | 4 +++ drivers/tty/serial/8250/Makefile | 1 + 5 files changed, 62 insertions(+), 22 deletions(-) create mode 100644 drivers/tty/serial/8250/8250_pcilib.c create mode 100644 drivers/tty/serial/8250/8250_pcilib.h diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6f66dc2ebacc..58cc9e19bd20 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -24,6 +24,7 @@ #include #include "8250.h" +#include "8250_pcilib.h" /* * init function returns: @@ -89,28 +90,7 @@ static int setup_port(struct serial_private *priv, struct uart_8250_port *port, u8 bar, unsigned int offset, int regshift) { - struct pci_dev *dev = priv->dev; - - if (bar >= PCI_STD_NUM_BARS) - return -EINVAL; - - if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { - if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev)) - return -ENOMEM; - - port->port.iotype = UPIO_MEM; - port->port.iobase = 0; - port->port.mapbase = pci_resource_start(dev, bar) + offset; - port->port.membase = pcim_iomap_table(dev)[bar] + offset; - port->port.regshift = regshift; - } else { - port->port.iotype = UPIO_PORT; - port->port.iobase = pci_resource_start(dev, bar) + offset; - port->port.mapbase = 0; - port->port.membase = NULL; - port->port.regshift = 0; - } - return 0; + return serial8250_pci_setup_port(priv->dev, port, bar, offset, regshift); } /* @@ -5759,3 +5739,4 @@ module_pci_driver(serial_pci_driver); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Generic 8250/16x50 PCI serial probe module"); MODULE_DEVICE_TABLE(pci, serial_pci_tbl); +MODULE_IMPORT_NS(SERIAL_8250_PCI); diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c new file mode 100644 index 000000000000..a7124cda1871 --- /dev/null +++ b/drivers/tty/serial/8250/8250_pcilib.c @@ -0,0 +1,39 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * 8250 PCI library. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + */ +#include +#include +#include +#include + +#include "8250.h" + +int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, + u8 bar, unsigned int offset, int regshift) +{ + if (bar >= PCI_STD_NUM_BARS) + return -EINVAL; + + if (pci_resource_flags(dev, bar) & IORESOURCE_MEM) { + if (!pcim_iomap(dev, bar, 0) && !pcim_iomap_table(dev)) + return -ENOMEM; + + port->port.iotype = UPIO_MEM; + port->port.iobase = 0; + port->port.mapbase = pci_resource_start(dev, bar) + offset; + port->port.membase = pcim_iomap_table(dev)[bar] + offset; + port->port.regshift = regshift; + } else { + port->port.iotype = UPIO_PORT; + port->port.iobase = pci_resource_start(dev, bar) + offset; + port->port.mapbase = 0; + port->port.membase = NULL; + port->port.regshift = 0; + } + return 0; +} +EXPORT_SYMBOL_NS_GPL(serial8250_pci_setup_port, SERIAL_8250_PCI); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h new file mode 100644 index 000000000000..1aaf1b50ce9c --- /dev/null +++ b/drivers/tty/serial/8250/8250_pcilib.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * 8250 PCI library header file. + * + * Copyright (C) 2001 Russell King, All Rights Reserved. + */ + +#include + +struct pci_dev; + +struct uart_8250_port; + +int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar, + unsigned int offset, int regshift); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index d0b49e15fbf5..768b73d5cb9a 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -129,9 +129,13 @@ config SERIAL_8250_DMA This builds DMA support that can be used with 8250/16650 compatible UART controllers that support DMA signaling. +config SERIAL_8250_PCILIB + bool + config SERIAL_8250_PCI tristate "8250/16550 PCI device support" depends on SERIAL_8250 && PCI + select SERIAL_8250_PCILIB default SERIAL_8250 help This builds standard PCI serial support. You may be able to diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index bee908f99ea0..b9179d1f104b 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250.o 8250_base.o 8250_base-$(CONFIG_SERIAL_8250_DMA) += 8250_dma.o 8250_base-$(CONFIG_SERIAL_8250_DWLIB) += 8250_dwlib.o 8250_base-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o +8250_base-$(CONFIG_SERIAL_8250_PCILIB) += 8250_pcilib.o obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o obj-$(CONFIG_SERIAL_8250_EXAR) += 8250_exar.o From patchwork Sat Dec 17 19:15:05 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kumaravel Thiagarajan X-Patchwork-Id: 634945 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 743D5C4332F for ; Sat, 17 Dec 2022 06:40:57 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229562AbiLQGky (ORCPT ); Sat, 17 Dec 2022 01:40:54 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51082 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230076AbiLQGkv (ORCPT ); Sat, 17 Dec 2022 01:40:51 -0500 Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.154.123]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E412767D9A; Fri, 16 Dec 2022 22:40:34 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1671259235; x=1702795235; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=wg/FMOleYwWP5WgBq3sh2JlRo34DtfKVPq8OwMBoPio=; b=Cw40LhauK3DBTJmDJvKVm1DU6aECySANE6Xl0hfn6hPTGeqyo6hPEeLt Hhj2k2pv1Q7IL6vMoGjhyjOd1iPZ75HVG33yl5fZRD7QT0CxncJx6/5zG k1nxznkT9ReCGDaaszAQrlswoO6psxBbQbJ2iu2WZT+TggsLO/Y8MDYJO af08F55UKYokdtUzK5u/+mJOdrmFN4VMI+/TQWyohCVMWiyyPpH9WEfvH IWBoX4dhEBJkG8X3jB4aIsP1bVEFI0NuVCjpEXjIU+FNujHLqIm1Oj0Bz ghP89OYZxJ6doGMi0bFcFFR99ZBDQCnEDc/HGSPEk/tlnLOKgpjHpUqqj Q==; X-IronPort-AV: E=Sophos;i="5.96,252,1665471600"; d="scan'208";a="188610391" Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 16 Dec 2022 23:40:35 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.16; Fri, 16 Dec 2022 23:40:33 -0700 Received: from CHE-LT-UNGSOFTWARE.microchip.com (10.10.115.15) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.16 via Frontend Transport; Fri, 16 Dec 2022 23:40:27 -0700 From: Kumaravel Thiagarajan To: CC: , , , , , , , , , , , , , , , , , Tharun Kumar P Subject: [PATCH v10 tty-next 2/4] serial: 8250_pci1xxxx: Add driver for quad-uart support Date: Sun, 18 Dec 2022 00:45:05 +0530 Message-ID: <20221217191507.2359029-3-kumaravel.thiagarajan@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> References: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org pci1xxxx is a PCIe switch with a multi-function endpoint on one of its downstream ports. Quad-uart is one of the functions in the multi-function endpoint. This driver loads for the quad-uart and enumerates single or multiple instances of uart based on the PCIe subsystem device ID. Co-developed-by: Tharun Kumar P Signed-off-by: Tharun Kumar P Signed-off-by: Kumaravel Thiagarajan Reviewed-by: Andy Shevchenko --- Changes in v10: - Added spaces to improve readability - Used macro for PORT_OFFSET - Used pci_free_irq_vectors API Changes in v9: - Reshuffled code logically - Modified datatype of few variables - Removed un-necessary else - Used PCI_VDEVICE() Changes in v8: - Requested only required number of interrupt vectors in pci_alloc_irq_vectors API based on sub-device id Changes in v7: - Used appropriate error codes - Moved logical_to_physical_port_idx array to a function Changes in v6: - Removed un-necessary paranthesis - Used array and removed switch cases to reduce complexity - Handled failure case of pcim_iomap Changes in v5: - Used tabs instead of spaces in MACRO definitions for readability - Removed assignments that are not required - Removed redundant blank lines Changes in v4: - Renamed pci_setup_port to serial8250_pci_setup_port - Added Copyright information to 8250_pcilib.c Changes in v3: - Used NSEC_PER_SEC, HZ_PER_MHZ, FIELD_PREP, FIELD_GET MACROs wherever necessary - Handled failure case of serial8250_register_8250_port properly - Moved pci_setup_port to 8250_pcilib.c Changes in v2: - Use only the 62.5 MHz for baud clock. - Define custom implementation for get_divisor and set_divisor. - Use BOTHER instead of UPF_SPD_CUST for non standard baud rates (untested). - Correct indentation in clock divisor computation. - Remove unnecessary call to pci_save_state in probe function. - Fix null pointer dereference in probe function. - Move pci1xxxx_rs485_config to a separate patch. - Depends on SERIAL_8250_PCI & default to SERIAL_8250. - Change PORT_MCHP16550A to 100 from 124. --- MAINTAINERS | 7 + drivers/tty/serial/8250/8250_pci1xxxx.c | 329 ++++++++++++++++++++++++ drivers/tty/serial/8250/8250_port.c | 8 + drivers/tty/serial/8250/Kconfig | 11 + drivers/tty/serial/8250/Makefile | 1 + include/uapi/linux/serial_core.h | 3 + 6 files changed, 359 insertions(+) create mode 100644 drivers/tty/serial/8250/8250_pci1xxxx.c diff --git a/MAINTAINERS b/MAINTAINERS index d30f26e07cd3..aa98deaba249 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13434,6 +13434,13 @@ F: Documentation/devicetree/bindings/nvmem/microchip,sama7g5-otpc.yaml F: drivers/nvmem/microchip-otpc.c F: include/dt-bindings/nvmem/microchip,sama7g5-otpc.h +MICROCHIP PCIe UART DRIVER +M: Kumaravel Thiagarajan +M: Tharun Kumar P +L: linux-serial@vger.kernel.org +S: Maintained +F: drivers/tty/serial/8250/8250_pci1xxxx.c + MICROCHIP PWM DRIVER M: Claudiu Beznea L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c new file mode 100644 index 000000000000..ea04c014edb9 --- /dev/null +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -0,0 +1,329 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Probe module for 8250/16550-type MCHP PCI serial ports. + * + * Based on drivers/tty/serial/8250/8250_pci.c, + * + * Copyright (C) 2022 Microchip Technology Inc., All Rights Reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "8250.h" +#include "8250_pcilib.h" + +#define PCI_DEVICE_ID_EFAR_PCI12000 0xa002 +#define PCI_DEVICE_ID_EFAR_PCI11010 0xa012 +#define PCI_DEVICE_ID_EFAR_PCI11101 0xa022 +#define PCI_DEVICE_ID_EFAR_PCI11400 0xa032 +#define PCI_DEVICE_ID_EFAR_PCI11414 0xa042 + +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p 0x0001 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012 0x0002 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013 0x0003 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023 0x0004 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123 0x0005 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01 0x0006 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02 0x0007 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03 0x0008 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12 0x0009 +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13 0x000a +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23 0x000b +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0 0x000c +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1 0x000d +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2 0x000e +#define PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 0x000f + +#define PCI_SUBDEVICE_ID_EFAR_PCI12000 PCI_DEVICE_ID_EFAR_PCI12000 +#define PCI_SUBDEVICE_ID_EFAR_PCI11010 PCI_DEVICE_ID_EFAR_PCI11010 +#define PCI_SUBDEVICE_ID_EFAR_PCI11101 PCI_DEVICE_ID_EFAR_PCI11101 +#define PCI_SUBDEVICE_ID_EFAR_PCI11400 PCI_DEVICE_ID_EFAR_PCI11400 +#define PCI_SUBDEVICE_ID_EFAR_PCI11414 PCI_DEVICE_ID_EFAR_PCI11414 + +#define UART_ACTV_REG 0x11 +#define UART_BLOCK_SET_ACTIVE BIT(0) + +#define UART_PCI_CTRL_REG 0x80 +#define UART_PCI_CTRL_SET_MULTIPLE_MSI BIT(4) +#define UART_PCI_CTRL_D3_CLK_ENABLE BIT(0) + +#define ADCL_CFG_REG 0x40 +#define ADCL_CFG_POL_SEL BIT(2) +#define ADCL_CFG_PIN_SEL BIT(1) +#define ADCL_CFG_EN BIT(0) + +#define UART_BIT_SAMPLE_CNT 16 +#define BAUD_CLOCK_DIV_INT_MSK GENMASK(31, 8) +#define ADCL_CFG_RTS_DELAY_MASK GENMASK(11, 8) +#define UART_CLOCK_DEFAULT (62500 * HZ_PER_KHZ) + +#define UART_WAKE_REG 0x8C +#define UART_WAKE_MASK_REG 0x90 +#define UART_WAKE_N_PIN BIT(2) +#define UART_WAKE_NCTS BIT(1) +#define UART_WAKE_INT BIT(0) +#define UART_WAKE_SRCS \ + (UART_WAKE_N_PIN | UART_WAKE_NCTS | UART_WAKE_INT) + +#define UART_BAUD_CLK_DIVISOR_REG 0x54 + +#define UART_RESET_REG 0x94 +#define UART_RESET_D3_RESET_DISABLE BIT(16) + +#define MAX_PORTS 4 +#define PORT_OFFSET 0x100 + +static const int logical_to_physical_port_idx[][MAX_PORTS] = { + {0, 1, 2, 3}, /* PCI12000, PCI11010, PCI11101, PCI11400, PCI11414 */ + {0, 1, 2, 3}, /* PCI4p */ + {0, 1, 2, -1}, /* PCI3p012 */ + {0, 1, 3, -1}, /* PCI3p013 */ + {0, 2, 3, -1}, /* PCI3p023 */ + {1, 2, 3, -1}, /* PCI3p123 */ + {0, 1, -1, -1}, /* PCI2p01 */ + {0, 2, -1, -1}, /* PCI2p02 */ + {0, 3, -1, -1}, /* PCI2p03 */ + {1, 2, -1, -1}, /* PCI2p12 */ + {1, 3, -1, -1}, /* PCI2p13 */ + {2, 3, -1, -1}, /* PCI2p23 */ + {0, -1, -1, -1}, /* PCI1p0 */ + {1, -1, -1, -1}, /* PCI1p1 */ + {2, -1, -1, -1}, /* PCI1p2 */ + {3, -1, -1, -1}, /* PCI1p3 */ +}; + +struct pci1xxxx_8250 { + unsigned int nr; + void __iomem *membase; + int line[]; +}; + +static int pci1xxxx_get_num_ports(struct pci_dev *dev) +{ + switch (dev->subsystem_device) { + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p0: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p1: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p2: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3: + case PCI_SUBDEVICE_ID_EFAR_PCI12000: + case PCI_SUBDEVICE_ID_EFAR_PCI11010: + case PCI_SUBDEVICE_ID_EFAR_PCI11101: + case PCI_SUBDEVICE_ID_EFAR_PCI11400: + default: + return 1; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p01: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p02: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p03: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p12: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p13: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_2p23: + return 2; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p012: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p123: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p013: + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_3p023: + return 3; + case PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_4p: + case PCI_SUBDEVICE_ID_EFAR_PCI11414: + return 4; + } +} + +static unsigned int pci1xxxx_get_divisor(struct uart_port *port, + unsigned int baud, unsigned int *frac) +{ + unsigned int quot; + + /* + * Calculate baud rate sampling period in nanoseconds. + * Fractional part x denotes x/255 parts of a nanosecond. + */ + quot = NSEC_PER_SEC / (baud * UART_BIT_SAMPLE_CNT); + *frac = (NSEC_PER_SEC - quot * baud * UART_BIT_SAMPLE_CNT) * + 255 / UART_BIT_SAMPLE_CNT / baud; + + return quot; +} + +static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud, + unsigned int quot, unsigned int frac) +{ + writel(FIELD_PREP(BAUD_CLOCK_DIV_INT_MSK, quot) | frac, + port->membase + UART_BAUD_CLK_DIVISOR_REG); +} + +static int pci1xxxx_setup(struct pci_dev *pdev, + struct uart_8250_port *port, int port_idx) +{ + int ret; + + port->port.flags |= UPF_FIXED_TYPE | UPF_SKIP_TEST; + port->port.type = PORT_MCHP16550A; + port->port.set_termios = serial8250_do_set_termios; + port->port.get_divisor = pci1xxxx_get_divisor; + port->port.set_divisor = pci1xxxx_set_divisor; + + ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0); + if (ret < 0) + return ret; + + writeb(UART_BLOCK_SET_ACTIVE, port->port.membase + UART_ACTV_REG); + writeb(UART_WAKE_SRCS, port->port.membase + UART_WAKE_REG); + writeb(UART_WAKE_N_PIN, port->port.membase + UART_WAKE_MASK_REG); + + return 0; +} + +static unsigned int pci1xxxx_get_max_port(int subsys_dev) +{ + unsigned int i = MAX_PORTS; + + if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx)) + while (i--) { + if (logical_to_physical_port_idx[subsys_dev][i] != -1) + return logical_to_physical_port_idx[subsys_dev][i] + 1; + } + + if (subsys_dev == PCI_SUBDEVICE_ID_EFAR_PCI11414) + return 4; + + return 1; +} + +static int pci1xxxx_logical_to_physical_port_translate(int subsys_dev, int port) +{ + if (subsys_dev < ARRAY_SIZE(logical_to_physical_port_idx)) + return logical_to_physical_port_idx[subsys_dev][port]; + + return logical_to_physical_port_idx[0][port]; +} + +static int pci1xxxx_serial_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct device *dev = &pdev->dev; + struct pci1xxxx_8250 *priv; + struct uart_8250_port uart; + unsigned int max_vec_reqd; + unsigned int nr_ports, i; + int num_vectors; + int subsys_dev; + int port_idx; + int rc; + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + nr_ports = pci1xxxx_get_num_ports(pdev); + + priv = devm_kzalloc(dev, struct_size(priv, line, nr_ports), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->membase = pci_ioremap_bar(pdev, 0); + if (!priv->membase) + return -ENOMEM; + + pci_set_master(pdev); + + priv->nr = nr_ports; + + subsys_dev = pdev->subsystem_device; + max_vec_reqd = pci1xxxx_get_max_port(subsys_dev); + + num_vectors = pci_alloc_irq_vectors(pdev, 1, max_vec_reqd, PCI_IRQ_ALL_TYPES); + if (num_vectors < 0) { + pci_iounmap(pdev, priv->membase); + return num_vectors; + } + + memset(&uart, 0, sizeof(uart)); + uart.port.flags = UPF_SHARE_IRQ | UPF_FIXED_PORT; + uart.port.uartclk = UART_CLOCK_DEFAULT; + uart.port.dev = dev; + + if (num_vectors == max_vec_reqd) + writeb(UART_PCI_CTRL_SET_MULTIPLE_MSI, priv->membase + UART_PCI_CTRL_REG); + + for (i = 0; i < nr_ports; i++) { + priv->line[i] = -ENODEV; + + port_idx = pci1xxxx_logical_to_physical_port_translate(subsys_dev, i); + + if (num_vectors == max_vec_reqd) + uart.port.irq = pci_irq_vector(pdev, port_idx); + else + uart.port.irq = pci_irq_vector(pdev, 0); + + rc = pci1xxxx_setup(pdev, &uart, port_idx); + if (rc) { + dev_warn(dev, "Failed to setup port %u\n", i); + continue; + } + + priv->line[i] = serial8250_register_8250_port(&uart); + if (priv->line[i] < 0) { + dev_warn(dev, + "Couldn't register serial port %lx, irq %d, type %d, error %d\n", + uart.port.iobase, uart.port.irq, uart.port.iotype, + priv->line[i]); + } + } + + pci_set_drvdata(pdev, priv); + + return 0; +} + +static void pci1xxxx_serial_remove(struct pci_dev *dev) +{ + struct pci1xxxx_8250 *priv = pci_get_drvdata(dev); + unsigned int i; + + for (i = 0; i < priv->nr; i++) { + if (priv->line[i] >= 0) + serial8250_unregister_port(priv->line[i]); + } + + pci_free_irq_vectors(dev); + pci_iounmap(dev, priv->membase); +} + +static const struct pci_device_id pci1xxxx_pci_tbl[] = { + { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11010) }, + { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11101) }, + { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11400) }, + { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11414) }, + { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI12000) }, + {} +}; +MODULE_DEVICE_TABLE(pci, pci1xxxx_pci_tbl); + +static struct pci_driver pci1xxxx_pci_driver = { + .name = "pci1xxxx serial", + .probe = pci1xxxx_serial_probe, + .remove = pci1xxxx_serial_remove, + .id_table = pci1xxxx_pci_tbl, +}; +module_pci_driver(pci1xxxx_pci_driver); + +static_assert((ARRAY_SIZE(logical_to_physical_port_idx) == PCI_SUBDEVICE_ID_EFAR_PCI1XXXX_1p3 + 1)); + +MODULE_IMPORT_NS(SERIAL_8250_PCI); +MODULE_DESCRIPTION("Microchip Technology Inc. PCIe to UART module"); +MODULE_AUTHOR("Kumaravel Thiagarajan "); +MODULE_AUTHOR("Tharun Kumar P "); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1d2a43214b48..ec2fe5fd7b02 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -313,6 +313,14 @@ static const struct serial8250_config uart_config[] = { .rxtrig_bytes = {1, 4, 8, 14}, .flags = UART_CAP_FIFO, }, + [PORT_MCHP16550A] = { + .name = "MCHP16550A", + .fifo_size = 256, + .tx_loadsz = 256, + .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_01, + .rxtrig_bytes = {2, 66, 130, 194}, + .flags = UART_CAP_FIFO, + }, }; /* Uart divisor latch read */ diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 768b73d5cb9a..588a73c0f4e8 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -295,6 +295,17 @@ config SERIAL_8250_HUB6 To compile this driver as a module, choose M here: the module will be called 8250_hub6. +config SERIAL_8250_PCI1XXXX + tristate "Microchip 8250 based serial port" + depends on SERIAL_8250 && PCI + select SERIAL_8250_PCILIB + default SERIAL_8250 + help + Select this option if you have a setup with Microchip PCIe + Switch with serial port enabled and wish to enable 8250 + serial driver for the serial interface. This driver support + will ensure to support baud rates upto 1.5Mpbs. + # # Misc. options/drivers. # diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index b9179d1f104b..98202fdf39f8 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_PCI1XXXX) += 8250_pci1xxxx.o obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o obj-$(CONFIG_SERIAL_8250_MEN_MCB) += 8250_men_mcb.o obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 3ba34d8378bd..281fa286555c 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -207,6 +207,9 @@ /* Atheros AR933X SoC */ #define PORT_AR933X 99 +/* MCHP 16550A UART with 256 byte FIFOs */ +#define PORT_MCHP16550A 100 + /* ARC (Synopsys) on-chip UART */ #define PORT_ARC 101 From patchwork Sat Dec 17 19:15:06 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Kumaravel Thiagarajan X-Patchwork-Id: 635383 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 094F9C4332F for ; Sat, 17 Dec 2022 06:41:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230084AbiLQGlf (ORCPT ); Sat, 17 Dec 2022 01:41:35 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51272 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230246AbiLQGkz (ORCPT ); Sat, 17 Dec 2022 01:40:55 -0500 Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.154.123]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8279FB7C4; Fri, 16 Dec 2022 22:40:42 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1671259242; x=1702795242; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=lNbWuJ0eLCjdyI4dqrHGmI4+aGf1wBiAQxkgqK9NVSw=; b=CmlSEQAHeneZFihqSdTOU1buVLFIPrjTAs6YrToGF6dX3cv7M2OJweTF Hu/zx99jrVr4XnZaTV7qqs/FfjyFKACZuMupE+/r2YQscLdvHem0t1i44 loqy6c+Gjri8BNCsXjeP3IvFpfzusfbMZh5yvjNHdCucTExsrAX9J7+oX HOqqpsm+HXpGYIGNXxlIPuWHSJsz9KpcfvSVYwacjs1z4QD8QSvaakBL0 Q118H5QsGzzPdgb+Z457UE05Oh/31ddd178krLxnbcGIFd0V8nOQvzu6p Qxt+YNPnixM354iJspf7QUykaib3yd1/QuS7DZLZ8OA+B2iVHheYs7F3h Q==; X-IronPort-AV: E=Sophos;i="5.96,252,1665471600"; d="scan'208";a="128602818" Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa6.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 16 Dec 2022 23:40:41 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.16; Fri, 16 Dec 2022 23:40:41 -0700 Received: from CHE-LT-UNGSOFTWARE.microchip.com (10.10.115.15) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.16 via Frontend Transport; Fri, 16 Dec 2022 23:40:35 -0700 From: Kumaravel Thiagarajan To: CC: , , , , , , , , , , , , , , , , , Tharun Kumar P Subject: [PATCH v10 tty-next 3/4] serial: 8250_pci1xxxx: Add RS485 support to quad-uart driver Date: Sun, 18 Dec 2022 00:45:06 +0530 Message-ID: <20221217191507.2359029-4-kumaravel.thiagarajan@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> References: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org pci1xxxx uart supports RS485 mode of operation in the hardware with auto-direction control with configurable delay for releasing RTS after the transmission. This patch adds support for the RS485 mode. Co-developed-by: Tharun Kumar P Signed-off-by: Tharun Kumar P Signed-off-by: Kumaravel Thiagarajan Reviewed-by: Ilpo Järvinen --- Changes in v10: - No Change Changes in v9: - No Change Changes in v8: - Modified datatype of delay_in_baud_periods to u32 Changes in v7: - No Change Changes in v6: - Modified datatype of delay_in_baud_periods to u64 to avoid overflows Changes in v5: - Removed unnecessary assignments - Corrected styling issues in comments Changes in v4: - No Change Changes in v3: - Remove flags sanitization in driver which is taken care in core Changes in v2: - move pci1xxxx_rs485_config to a separate patch with pci1xxxx_rs485_supported. --- drivers/tty/serial/8250/8250_pci1xxxx.c | 50 +++++++++++++++++++++++++ 1 file changed, 50 insertions(+) diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c index ea04c014edb9..58f47d18f7d8 100644 --- a/drivers/tty/serial/8250/8250_pci1xxxx.c +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -164,6 +164,54 @@ static void pci1xxxx_set_divisor(struct uart_port *port, unsigned int baud, port->membase + UART_BAUD_CLK_DIVISOR_REG); } +static int pci1xxxx_rs485_config(struct uart_port *port, + struct ktermios *termios, + struct serial_rs485 *rs485) +{ + u32 delay_in_baud_periods; + u32 baud_period_in_ns; + u32 mode_cfg = 0; + u32 clock_div; + + /* + * pci1xxxx's uart hardware supports only RTS delay after + * Tx and in units of bit times to a maximum of 15 + */ + if (rs485->flags & SER_RS485_ENABLED) { + mode_cfg = ADCL_CFG_EN | ADCL_CFG_PIN_SEL; + + if (!(rs485->flags & SER_RS485_RTS_ON_SEND)) + mode_cfg |= ADCL_CFG_POL_SEL; + + if (rs485->delay_rts_after_send) { + clock_div = readl(port->membase + UART_BAUD_CLK_DIVISOR_REG); + baud_period_in_ns = + FIELD_GET(BAUD_CLOCK_DIV_INT_MSK, clock_div) * + UART_BIT_SAMPLE_CNT; + delay_in_baud_periods = + rs485->delay_rts_after_send * NSEC_PER_MSEC / + baud_period_in_ns; + delay_in_baud_periods = + min_t(u32, delay_in_baud_periods, + FIELD_MAX(ADCL_CFG_RTS_DELAY_MASK)); + mode_cfg |= FIELD_PREP(ADCL_CFG_RTS_DELAY_MASK, + delay_in_baud_periods); + rs485->delay_rts_after_send = + baud_period_in_ns * delay_in_baud_periods / + NSEC_PER_MSEC; + } + } + writel(mode_cfg, port->membase + ADCL_CFG_REG); + return 0; +} + +static const struct serial_rs485 pci1xxxx_rs485_supported = { + .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND, + .delay_rts_after_send = 1, + /* Delay RTS before send is not supported */ +}; + static int pci1xxxx_setup(struct pci_dev *pdev, struct uart_8250_port *port, int port_idx) { @@ -174,6 +222,8 @@ static int pci1xxxx_setup(struct pci_dev *pdev, port->port.set_termios = serial8250_do_set_termios; port->port.get_divisor = pci1xxxx_get_divisor; port->port.set_divisor = pci1xxxx_set_divisor; + port->port.rs485_config = pci1xxxx_rs485_config; + port->port.rs485_supported = pci1xxxx_rs485_supported; ret = serial8250_pci_setup_port(pdev, port, 0, PORT_OFFSET * port_idx, 0); if (ret < 0) From patchwork Sat Dec 17 19:15:07 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kumaravel Thiagarajan X-Patchwork-Id: 634944 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 43A8BC4332F for ; Sat, 17 Dec 2022 06:41:43 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S230145AbiLQGlk (ORCPT ); Sat, 17 Dec 2022 01:41:40 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:51290 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230190AbiLQGk5 (ORCPT ); Sat, 17 Dec 2022 01:40:57 -0500 Received: from esa.microchip.iphmx.com (esa.microchip.iphmx.com [68.232.154.123]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4F7CEE00D; Fri, 16 Dec 2022 22:40:49 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=microchip.com; i=@microchip.com; q=dns/txt; s=mchp; t=1671259253; x=1702795253; h=from:to:cc:subject:date:message-id:in-reply-to: references:mime-version:content-transfer-encoding; bh=YRxt5rhMNAk4hlkUwlWb5QlYXnZcpcrAzF1lQQTR4ps=; b=vIarzuK+lloqrnRJUF6ZLUs8uk+BuTjr9dNoJqvM7Uz8di5gQTPt4joM Q/hKwgcClI2EDQqD7IExStBcx+3Dlp1JgXuazKayNfTgCILCwMEeaiOAJ MscX3hlAgRUUn/lB4DY4T9DSvqQmNNw9yvUpfDPA1qBvCGejYknij0AGW ys4ikxo5GGhUnb/+n7vtXhJ5YqAwdiWcG/JlkOJdExgfUMMKITr85/J5T 3dmQnG3x7xP0Liw6UAR763DWi/jxZIxWA+NZBlLP3CSyeEnpq0YsGTYYv R6szav3ebQUXnBdNbmkRb7xAuh/iPbUymwDY/IIpgqEj2a5NEmIc6xDjU g==; X-IronPort-AV: E=Sophos;i="5.96,252,1665471600"; d="scan'208";a="188610399" Received: from unknown (HELO email.microchip.com) ([170.129.1.10]) by esa4.microchip.iphmx.com with ESMTP/TLS/AES256-SHA256; 16 Dec 2022 23:40:49 -0700 Received: from chn-vm-ex04.mchp-main.com (10.10.85.152) by chn-vm-ex03.mchp-main.com (10.10.85.151) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256) id 15.1.2507.16; Fri, 16 Dec 2022 23:40:48 -0700 Received: from CHE-LT-UNGSOFTWARE.microchip.com (10.10.115.15) by chn-vm-ex04.mchp-main.com (10.10.85.152) with Microsoft SMTP Server id 15.1.2507.16 via Frontend Transport; Fri, 16 Dec 2022 23:40:42 -0700 From: Kumaravel Thiagarajan To: CC: , , , , , , , , , , , , , , , , , Tharun Kumar P Subject: [PATCH v10 tty-next 4/4] serial: 8250_pci1xxxx: Add power management functions to quad-uart driver Date: Sun, 18 Dec 2022 00:45:07 +0530 Message-ID: <20221217191507.2359029-5-kumaravel.thiagarajan@microchip.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> References: <20221217191507.2359029-1-kumaravel.thiagarajan@microchip.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-serial@vger.kernel.org pci1xxxx's quad-uart function has the capability to wake up UART from suspend state. Enable wakeup before entering into suspend and disable wakeup on resume. Co-developed-by: Tharun Kumar P Signed-off-by: Tharun Kumar P Signed-off-by: Kumaravel Thiagarajan --- Changes in v10: - No Change Changes in v9: - No Change Changes in v8: - No Change Changes in v7: - No Change Changes in v6: - No Change Changes in v5: - Corrected commit message Changes in v4: - No Change Changes in v3: - Handled race condition in suspend and resume callbacks Changes in v2: - Use DEFINE_SIMPLE_DEV_PM_OPS instead of SIMPLE_DEV_PM_OPS. - Use pm_sleep_ptr instead of CONFIG_PM_SLEEP. - Change the return data type of pci1xxxx_port_suspend to bool from int. --- drivers/tty/serial/8250/8250_pci1xxxx.c | 115 ++++++++++++++++++++++++ 1 file changed, 115 insertions(+) diff --git a/drivers/tty/serial/8250/8250_pci1xxxx.c b/drivers/tty/serial/8250/8250_pci1xxxx.c index 58f47d18f7d8..a3b25779d921 100644 --- a/drivers/tty/serial/8250/8250_pci1xxxx.c +++ b/drivers/tty/serial/8250/8250_pci1xxxx.c @@ -212,6 +212,116 @@ static const struct serial_rs485 pci1xxxx_rs485_supported = { /* Delay RTS before send is not supported */ }; +static bool pci1xxxx_port_suspend(int line) +{ + struct uart_8250_port *up = serial8250_get_port(line); + struct uart_port *port = &up->port; + struct tty_port *tport = &port->state->port; + unsigned long flags; + bool ret = false; + u8 wakeup_mask; + + mutex_lock(&tport->mutex); + if (port->suspended == 0 && port->dev) { + wakeup_mask = readb(up->port.membase + UART_WAKE_MASK_REG); + + spin_lock_irqsave(&port->lock, flags); + port->mctrl &= ~TIOCM_OUT2; + port->ops->set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); + + ret = (wakeup_mask & UART_WAKE_SRCS) != UART_WAKE_SRCS; + } + + writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG); + mutex_unlock(&tport->mutex); + + return ret; +} + +static void pci1xxxx_port_resume(int line) +{ + struct uart_8250_port *up = serial8250_get_port(line); + struct uart_port *port = &up->port; + struct tty_port *tport = &port->state->port; + unsigned long flags; + + mutex_lock(&tport->mutex); + writeb(UART_BLOCK_SET_ACTIVE, port->membase + UART_ACTV_REG); + writeb(UART_WAKE_SRCS, port->membase + UART_WAKE_REG); + + if (port->suspended == 0) { + spin_lock_irqsave(&port->lock, flags); + port->mctrl |= TIOCM_OUT2; + port->ops->set_mctrl(port, port->mctrl); + spin_unlock_irqrestore(&port->lock, flags); + } + mutex_unlock(&tport->mutex); +} + +static int pci1xxxx_suspend(struct device *dev) +{ + struct pci1xxxx_8250 *priv = dev_get_drvdata(dev); + struct pci_dev *pcidev = to_pci_dev(dev); + bool wakeup = false; + unsigned int data; + void __iomem *p; + int i; + + for (i = 0; i < priv->nr; i++) { + if (priv->line[i] >= 0) { + serial8250_suspend_port(priv->line[i]); + wakeup |= pci1xxxx_port_suspend(priv->line[i]); + } + } + + p = pci_ioremap_bar(pcidev, 0); + if (!p) { + dev_err(dev, "remapping of bar 0 memory failed"); + return -ENOMEM; + } + + data = readl(p + UART_RESET_REG); + writel(data | UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG); + + if (wakeup) + writeb(UART_PCI_CTRL_D3_CLK_ENABLE, p + UART_PCI_CTRL_REG); + + iounmap(p); + device_set_wakeup_enable(dev, true); + pci_wake_from_d3(pcidev, true); + + return 0; +} + +static int pci1xxxx_resume(struct device *dev) +{ + struct pci1xxxx_8250 *priv = dev_get_drvdata(dev); + struct pci_dev *pcidev = to_pci_dev(dev); + unsigned int data; + void __iomem *p; + int i; + + p = pci_ioremap_bar(pcidev, 0); + if (!p) { + dev_err(dev, "remapping of bar 0 memory failed"); + return -ENOMEM; + } + + data = readl(p + UART_RESET_REG); + writel(data & ~UART_RESET_D3_RESET_DISABLE, p + UART_RESET_REG); + iounmap(p); + + for (i = 0; i < priv->nr; i++) { + if (priv->line[i] >= 0) { + pci1xxxx_port_resume(priv->line[i]); + serial8250_resume_port(priv->line[i]); + } + } + + return 0; +} + static int pci1xxxx_setup(struct pci_dev *pdev, struct uart_8250_port *port, int port_idx) { @@ -352,6 +462,8 @@ static void pci1xxxx_serial_remove(struct pci_dev *dev) pci_iounmap(dev, priv->membase); } +static DEFINE_SIMPLE_DEV_PM_OPS(pci1xxxx_pm_ops, pci1xxxx_suspend, pci1xxxx_resume); + static const struct pci_device_id pci1xxxx_pci_tbl[] = { { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11010) }, { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_PCI11101) }, @@ -366,6 +478,9 @@ static struct pci_driver pci1xxxx_pci_driver = { .name = "pci1xxxx serial", .probe = pci1xxxx_serial_probe, .remove = pci1xxxx_serial_remove, + .driver = { + .pm = pm_sleep_ptr(&pci1xxxx_pm_ops), + }, .id_table = pci1xxxx_pci_tbl, }; module_pci_driver(pci1xxxx_pci_driver);