From patchwork Tue Oct 11 12:16:01 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Mugnier X-Patchwork-Id: 614496 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1BB10C433F5 for ; Tue, 11 Oct 2022 12:16:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229717AbiJKMQu (ORCPT ); Tue, 11 Oct 2022 08:16:50 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:40434 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229803AbiJKMQg (ORCPT ); Tue, 11 Oct 2022 08:16:36 -0400 Received: from mx07-00178001.pphosted.com (mx08-00178001.pphosted.com [91.207.212.93]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 95ABE558EA for ; Tue, 11 Oct 2022 05:16:32 -0700 (PDT) Received: from pps.filterd (m0046661.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.5/8.17.1.5) with ESMTP id 29B8WQiK029025; Tue, 11 Oct 2022 14:16:25 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=dOtZLIKS1GQiuz4nvL5HL95q1vv+3b68sY288kUJMwA=; b=CJfAJ4NP3SetvxeLWoG45rYatLv9PYAho65ct/SzQa6PYg9f5SOcTg9YaxGeEPbEshUR Yz0/ejnEAcN3noHj17FF+kc/oNrnkxWtGgT2JqdNdXtlaBJuyBnHxaQtxf3wKw/3GwkZ 8JJyuVI8pgJ5s7MkZpvKA244pEErlrywwQqDkuAo+rvLah7pwqGoxvekV2C9OAodvlnq eCk4RQ+UL5MSTXILDOBXtyPTl7maJQY+fOUywoI51SV7noKlN/eVLblsrT3WRtpozyU5 qNszYfdUMk1HsDYFkzZeu/kChKs2/T9gIHSkgxt4NryvYJQaHdicU9VCpwrcegjg+4Nv Dg== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3k31gpu487-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 11 Oct 2022 14:16:25 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 1011E10002A; Tue, 11 Oct 2022 14:16:21 +0200 (CEST) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 09568226FB7; Tue, 11 Oct 2022 14:16:21 +0200 (CEST) Received: from localhost (10.75.127.119) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256) id 15.1.2375.31; Tue, 11 Oct 2022 14:16:20 +0200 From: Benjamin Mugnier To: CC: , , , , , , , , , Benjamin Mugnier Subject: [PATCH v7 1/5] media: v4l: Add 1X16 16-bit greyscale media bus code definition Date: Tue, 11 Oct 2022 14:16:01 +0200 Message-ID: <20221011121605.30260-1-benjamin.mugnier@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> References: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.119] X-ClientProxiedBy: GPXDAG2NODE4.st.com (10.75.127.68) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.895,Hydra:6.0.545,FMLib:17.11.122.1 definitions=2022-10-11_07,2022-10-11_02,2022-06-22_01 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org This extends the greyscale media bus family originally from MEDIA_BUS_FMT_Y8_1X8 up to MEDIA_BUS_FMT_Y14_1X14 by adding MEDIA_BUS_FMT_Y16_1X16, and behaves the same way with 16 bits. Add its documentation in subdev-formats.rst Signed-off-by: Benjamin Mugnier Reviewed-by: Laurent Pinchart Reviewed-by: Paul Elder --- .../media/v4l/subdev-formats.rst | 37 +++++++++++++++++++ include/uapi/linux/media-bus-format.h | 3 +- 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst index d21d532eee15..16ef3b41932e 100644 --- a/Documentation/userspace-api/media/v4l/subdev-formats.rst +++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst @@ -6057,6 +6057,43 @@ the following codes. - y\ :sub:`2` - y\ :sub:`1` - y\ :sub:`0` + * .. _MEDIA-BUS-FMT-Y16-1X16: + + - MEDIA_BUS_FMT_Y16_1X16 + - 0x202e + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - + - y\ :sub:`15` + - y\ :sub:`14` + - y\ :sub:`13` + - y\ :sub:`12` + - y\ :sub:`11` + - y\ :sub:`10` + - y\ :sub:`9` + - y\ :sub:`8` + - y\ :sub:`7` + - y\ :sub:`6` + - y\ :sub:`5` + - y\ :sub:`4` + - y\ :sub:`3` + - y\ :sub:`2` + - y\ :sub:`1` + - y\ :sub:`0` * .. _MEDIA-BUS-FMT-UYVY8-1X16: - MEDIA_BUS_FMT_UYVY8_1X16 diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h index ec3323dbb927..ca9a24c874da 100644 --- a/include/uapi/linux/media-bus-format.h +++ b/include/uapi/linux/media-bus-format.h @@ -69,7 +69,7 @@ #define MEDIA_BUS_FMT_RGB121212_1X36 0x1019 #define MEDIA_BUS_FMT_RGB161616_1X48 0x101a -/* YUV (including grey) - next is 0x202e */ +/* YUV (including grey) - next is 0x202f */ #define MEDIA_BUS_FMT_Y8_1X8 0x2001 #define MEDIA_BUS_FMT_UV8_1X8 0x2015 #define MEDIA_BUS_FMT_UYVY8_1_5X8 0x2002 @@ -92,6 +92,7 @@ #define MEDIA_BUS_FMT_YUYV12_2X12 0x201e #define MEDIA_BUS_FMT_YVYU12_2X12 0x201f #define MEDIA_BUS_FMT_Y14_1X14 0x202d +#define MEDIA_BUS_FMT_Y16_1X16 0x202e #define MEDIA_BUS_FMT_UYVY8_1X16 0x200f #define MEDIA_BUS_FMT_VYUY8_1X16 0x2010 #define MEDIA_BUS_FMT_YUYV8_1X16 0x2011 From patchwork Tue Oct 11 12:16:02 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Mugnier X-Patchwork-Id: 614712 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D801BC433FE for ; Tue, 11 Oct 2022 12:18:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229505AbiJKMR7 (ORCPT ); Tue, 11 Oct 2022 08:17:59 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42208 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229573AbiJKMR6 (ORCPT ); Tue, 11 Oct 2022 08:17:58 -0400 Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 7B17F422FC for ; Tue, 11 Oct 2022 05:17:57 -0700 (PDT) Received: from pps.filterd (m0241204.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.5/8.17.1.5) with ESMTP id 29B8daMX018196; Tue, 11 Oct 2022 14:17:52 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=NKBCu8tNbnWUbZ8qJ0CwA4TaRHKVo7VlkUde37ZWDO8=; b=4ly949jWFJedNtNZgIZCaHcu34iuNBz4vpu5rInyJh909/HTqW8ybQ8NIDGNl6k5z+L6 UvBqm3SOX4pw6MphNxjvZQ77Jrzmc08GgfMJp1IQCDesAuwRAClBC7ol6cw7Uh6QezUn TZxjsornHpDUOCtWRXJe2BfVS/dd0snovkxTDPp1hsW5DmKMSTEwqqO2SOfAXHNjhhgL r3atcoimEGilvOoDNzG0foVCEK6VfFDKIEcbyKnek4oE7nZfk/7BsY2Z+a0AQvfYfHdo AyJLCEePBT4NJyIcRpmDyhns0JYxkLN4pQYME+qUINMwDutWYyaXX2kJHIsMFmtXZyfi Gw== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3k31m9j10y-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 11 Oct 2022 14:17:51 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 6881210002A; Tue, 11 Oct 2022 14:17:47 +0200 (CEST) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 64231226FBD; Tue, 11 Oct 2022 14:17:47 +0200 (CEST) Received: from localhost (10.75.127.44) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256) id 15.1.2375.31; Tue, 11 Oct 2022 14:17:47 +0200 From: Benjamin Mugnier To: CC: , , , , , , , , , Benjamin Mugnier Subject: [PATCH v7 2/5] media: v4l: ctrls: Add a control for HDR mode Date: Tue, 11 Oct 2022 14:16:02 +0200 Message-ID: <20221011121605.30260-2-benjamin.mugnier@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221011121605.30260-1-benjamin.mugnier@foss.st.com> References: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> <20221011121605.30260-1-benjamin.mugnier@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.44] X-ClientProxiedBy: SFHDAG2NODE3.st.com (10.75.127.6) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.895,Hydra:6.0.545,FMLib:17.11.122.1 definitions=2022-10-11_07,2022-10-11_02,2022-06-22_01 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the sensor, and its documentation. Menu items are not standardized as they differ for each sensors. Signed-off-by: Benjamin Mugnier --- .../userspace-api/media/v4l/ext-ctrls-camera.rst | 8 ++++++++ drivers/media/v4l2-core/v4l2-ctrls-defs.c | 2 ++ include/uapi/linux/v4l2-controls.h | 2 ++ 3 files changed, 12 insertions(+) diff --git a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst index 4c5061aa9cd4..daa4f40869f8 100644 --- a/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst +++ b/Documentation/userspace-api/media/v4l/ext-ctrls-camera.rst @@ -661,3 +661,11 @@ enum v4l2_scene_mode - .. [#f1] This control may be changed to a menu control in the future, if more options are required. + +``V4L2_CID_HDR_SENSOR_MODE (menu)`` + Change the sensor HDR mode. A HDR picture is obtained by merging two + captures of the same scene using two different exposure periods. HDR mode + describes the way these two captures are merged in the sensor. + + As modes differ for each sensor, menu items are not standardized by this + control and are left to the programmer. diff --git a/drivers/media/v4l2-core/v4l2-ctrls-defs.c b/drivers/media/v4l2-core/v4l2-ctrls-defs.c index e22921e7ea61..564fedee2c88 100644 --- a/drivers/media/v4l2-core/v4l2-ctrls-defs.c +++ b/drivers/media/v4l2-core/v4l2-ctrls-defs.c @@ -1043,6 +1043,7 @@ const char *v4l2_ctrl_get_name(u32 id) case V4L2_CID_UNIT_CELL_SIZE: return "Unit Cell Size"; case V4L2_CID_CAMERA_ORIENTATION: return "Camera Orientation"; case V4L2_CID_CAMERA_SENSOR_ROTATION: return "Camera Sensor Rotation"; + case V4L2_CID_HDR_SENSOR_MODE: return "HDR Sensor Mode"; /* FM Radio Modulator controls */ /* Keep the order of the 'case's the same as in v4l2-controls.h! */ @@ -1370,6 +1371,7 @@ void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, case V4L2_CID_STATELESS_H264_START_CODE: case V4L2_CID_CAMERA_ORIENTATION: case V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE: + case V4L2_CID_HDR_SENSOR_MODE: *type = V4L2_CTRL_TYPE_MENU; break; case V4L2_CID_LINK_FREQ: diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h index b5e7d082b8ad..d27e255ed33b 100644 --- a/include/uapi/linux/v4l2-controls.h +++ b/include/uapi/linux/v4l2-controls.h @@ -1019,6 +1019,8 @@ enum v4l2_auto_focus_range { #define V4L2_CID_CAMERA_SENSOR_ROTATION (V4L2_CID_CAMERA_CLASS_BASE+35) +#define V4L2_CID_HDR_SENSOR_MODE (V4L2_CID_CAMERA_CLASS_BASE+36) + /* FM Modulator class control IDs */ #define V4L2_CID_FM_TX_CLASS_BASE (V4L2_CTRL_CLASS_FM_TX | 0x900) From patchwork Tue Oct 11 12:30:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Mugnier X-Patchwork-Id: 614495 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id AE190C433F5 for ; Tue, 11 Oct 2022 12:31:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229501AbiJKMay (ORCPT ); Tue, 11 Oct 2022 08:30:54 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43536 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229815AbiJKMar (ORCPT ); Tue, 11 Oct 2022 08:30:47 -0400 Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4A9406292B for ; Tue, 11 Oct 2022 05:30:45 -0700 (PDT) Received: from pps.filterd (m0288072.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.5/8.17.1.5) with ESMTP id 29B8WjsF018631; Tue, 11 Oct 2022 14:30:40 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=wNAIIPZbFsqLX2oOSCcg2slp0af9mBFIu6iecpyvsYU=; b=PpMAYixvh5y+q7MMI5zWcwWFe5LPZrytBFAstDGG7c110l0BauZUGTHDAmU37oa1c+LY pwaAH/CrhGbMJEjCGVGxBWOQjq2VNlJzT0XML+OIDfa9r8D9NzZCG+219kvoWdbILLwg 87iYqo9D+Kw3hMEN5jfhKavD1+saZr5EHjS4aI80kqjk7/lgLMJFdWGe+VMw8XWK03+y +UIMbkjW5LSn+Ti5qH+Iay8ALDWDkFkPGivYbJQkX2pOIKrvdDzx9wHNcda1S4WcM1TI iOY+/dL3H6iO4wenhQPGJilI4FxE70+92uBEDUrQbRgBaBESf+nQdJ/fChYN49DlxSmh 5w== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3k31exj6bw-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 11 Oct 2022 14:30:40 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 7948F10002A; Tue, 11 Oct 2022 14:30:35 +0200 (CEST) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 74AEE227893; Tue, 11 Oct 2022 14:30:35 +0200 (CEST) Received: from localhost (10.75.127.48) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256) id 15.1.2375.31; Tue, 11 Oct 2022 14:30:35 +0200 From: Benjamin Mugnier To: CC: , , , , , , , , , Benjamin Mugnier Subject: [PATCH v7 3/5] media: dt-bindings: Add ST VGXY61 camera sensor binding Date: Tue, 11 Oct 2022 14:30:28 +0200 Message-ID: <20221011123030.31802-1-benjamin.mugnier@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> References: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.48] X-ClientProxiedBy: SFHDAG2NODE3.st.com (10.75.127.6) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.895,Hydra:6.0.545,FMLib:17.11.122.1 definitions=2022-10-11_07,2022-10-11_02,2022-06-22_01 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Add device tree binding for the ST VGXY61 camera sensor, and update MAINTAINERS file. Signed-off-by: Benjamin Mugnier --- .../bindings/media/i2c/st,st-vgxy61.yaml | 113 ++++++++++++++++++ MAINTAINERS | 10 ++ 2 files changed, 123 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml diff --git a/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml new file mode 100644 index 000000000000..6597e1d0e65f --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright (c) 2022 STMicroelectronics SA. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/st,st-vgxy61.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectronics VGxy61 HDR Global Shutter Sensor Family Device Tree Bindings + +maintainers: + - Benjamin Mugnier + - Sylvain Petinot + +description: |- + STMicroelectronics VGxy61 family has a CSI-2 output port. CSI-2 output is a + quad lanes 800Mbps per lane. + Supported formats are RAW8, RAW10, RAW12, RAW14 and RAW16. + Following part number are supported + - VG5661 and VG6661 are 1.6 Mpx (1464 x 1104) monochrome and color sensors. + Maximum frame rate is 75 fps. + - VG5761 and VG6761 are 2.3 Mpx (1944 x 1204) monochrome and color sensors. + Maximum frame rate is 60 fps. + +properties: + compatible: + const: st,st-vgxy61 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + VCORE-supply: + description: + Sensor digital core supply. Must be 1.2 volts. + + VDDIO-supply: + description: + Sensor digital IO supply. Must be 1.8 volts. + + VANA-supply: + description: + Sensor analog supply. Must be 2.8 volts. + + reset-gpios: + description: + Reference to the GPIO connected to the reset pin, if any. + This is an active low signal to the vgxy61. + + st,strobe-gpios-polarity: + description: + Invert polarity of illuminator's lights strobe GPIOs. + These GPIOs directly drive the illuminator LEDs. + type: boolean + + port: + $ref: /schemas/graph.yaml#/$defs/port-base + additionalProperties: false + + properties: + endpoint: + $ref: /schemas/media/video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + description: + CSI lanes to use + items: + - const: 1 + - const: 2 + - const: 3 + - const: 4 + + remote-endpoint: true + + required: + - data-lanes + +required: + - compatible + - clocks + - VCORE-supply + - VDDIO-supply + - VANA-supply + - port + +additionalProperties: false + +examples: + - | + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + vgxy61: csi2tx@10 { + compatible = "st,st-vgxy61"; + reg = <0x10>; + clocks = <&clk_ext_camera>; + VCORE-supply = <&v1v2>; + VDDIO-supply = <&v1v8>; + VANA-supply = <&v2v8>; + reset-gpios = <&mfxgpio 18 GPIO_ACTIVE_LOW>; + port { + ep0: endpoint { + data-lanes = <1 2 3 4>; + remote-endpoint = <&mipi_csi2_out>; + }; + }; + }; + }; +... diff --git a/MAINTAINERS b/MAINTAINERS index a58f1fc6dd47..a4bf6d534949 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19278,6 +19278,16 @@ S: Maintained F: Documentation/hwmon/stpddc60.rst F: drivers/hwmon/pmbus/stpddc60.c +ST VGXY61 DRIVER +M: Benjamin Mugnier +M: Sylvain Petinot +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/i2c/st,st-vgxy61.yaml +F: Documentation/userspace-api/media/drivers/st-vgxy61.rst +F: drivers/media/i2c/st-vgxy61.c + ST VL53L0X ToF RANGER(I2C) IIO DRIVER M: Song Qiang L: linux-iio@vger.kernel.org From patchwork Tue Oct 11 12:30:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Mugnier X-Patchwork-Id: 614711 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 666C2C433F5 for ; Tue, 11 Oct 2022 12:33:10 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229587AbiJKMch (ORCPT ); Tue, 11 Oct 2022 08:32:37 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43980 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229824AbiJKMcM (ORCPT ); Tue, 11 Oct 2022 08:32:12 -0400 Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 689D87B1C8 for ; Tue, 11 Oct 2022 05:32:11 -0700 (PDT) Received: from pps.filterd (m0288072.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.5/8.17.1.5) with ESMTP id 29B8efH5018454; Tue, 11 Oct 2022 14:32:05 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=0k3AuTMGOK1lVLVMdHwfF4AwMm931FvjdNJtikIWCT8=; b=C+XBzCKnWxgtjI+vtBL67Y2cLdzJvsyddWDUNBaEn5U/q0yp7sRfsGozSNOXq8s1LIhu kFhPG17ijhPplKiWl8BrXvJWP224Tm0b3TTC5dggjQ303EjPHeCxEj2oPuvYWufXN/Jw ti24utSiqkOVdFjKLFJaXG4MW0moGWUdYF5iSfDfVC1bJ02zybR6u7Wt7d95UjfnIn12 K84MufLPxDC3okLmqJy7JW9Ru9zJOjchubsAsHjq3bw8c2UngPncTaeSxawh7137WYYo 4kpDTrTDd+VcPPNQO50Lde4XT/TF3OmwCs2eK/c3d0tnkNXF9L0xOj5lmH7Dai9/uvQ2 Vw== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3k31exj6mt-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 11 Oct 2022 14:32:05 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id CF375100034; Tue, 11 Oct 2022 14:32:01 +0200 (CEST) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id CA69F22789A; Tue, 11 Oct 2022 14:32:01 +0200 (CEST) Received: from localhost (10.75.127.121) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256) id 15.1.2375.31; Tue, 11 Oct 2022 14:32:01 +0200 From: Benjamin Mugnier To: CC: , , , , , , , , , Benjamin Mugnier Subject: [PATCH v7 4/5] media: Documentation: Add ST VGXY61 driver documentation Date: Tue, 11 Oct 2022 14:30:29 +0200 Message-ID: <20221011123030.31802-2-benjamin.mugnier@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> References: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.121] X-ClientProxiedBy: GPXDAG2NODE4.st.com (10.75.127.68) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.895,Hydra:6.0.545,FMLib:17.11.122.1 definitions=2022-10-11_07,2022-10-11_02,2022-06-22_01 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org Document V4L2_CID_HDR_MODE possible values for this sensor. Signed-off-by: Benjamin Mugnier --- .../userspace-api/media/drivers/st-vgxy61.rst | 23 +++++++++++++++++++ 1 file changed, 23 insertions(+) create mode 100644 Documentation/userspace-api/media/drivers/st-vgxy61.rst diff --git a/Documentation/userspace-api/media/drivers/st-vgxy61.rst b/Documentation/userspace-api/media/drivers/st-vgxy61.rst new file mode 100644 index 000000000000..213b884dcfa6 --- /dev/null +++ b/Documentation/userspace-api/media/drivers/st-vgxy61.rst @@ -0,0 +1,23 @@ +.. SPDX-License-Identifier: GPL-2.0 + +ST VGXY61 camera sensor driver +============================== + +The ST VGXY61 driver implements the following controls: + +``V4L2_CID_HDR_SENSOR_MODE`` +------------------------------- + Change the sensor HDR mode. A HDR picture is obtained by merging two captures of the same scene + using two different exposure periods. + +.. flat-table:: + :header-rows: 0 + :stub-columns: 0 + :widths: 1 4 + + * - HDR linearize + - The merger outputs a long exposure capture as long as it is not saturated. + * - HDR substraction + - This involves subtracting the short exposure frame from the long exposure frame. + * - "No HDR" + - This mode is used for standard dynamic range (SDR) exposures. From patchwork Tue Oct 11 12:30:30 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Benjamin Mugnier X-Patchwork-Id: 614494 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5D0E7C433F5 for ; Tue, 11 Oct 2022 12:34:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229711AbiJKMeY (ORCPT ); Tue, 11 Oct 2022 08:34:24 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:44598 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229755AbiJKMeX (ORCPT ); Tue, 11 Oct 2022 08:34:23 -0400 Received: from mx07-00178001.pphosted.com (mx07-00178001.pphosted.com [185.132.182.106]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8C9F07AC29 for ; Tue, 11 Oct 2022 05:34:19 -0700 (PDT) Received: from pps.filterd (m0241204.ppops.net [127.0.0.1]) by mx07-00178001.pphosted.com (8.17.1.5/8.17.1.5) with ESMTP id 29B8VFZD018168; Tue, 11 Oct 2022 14:34:13 +0200 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=foss.st.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-transfer-encoding : content-type; s=selector1; bh=zUkO3Pdwa0qeQ43urGrqJ12Qh2qlElJPihcKCwaslyo=; b=OXvLyQh1NdRzHNMX2wK11fqJQgwhwt/d7NpK12PiTia7QLQ+Mlczo4/ikSHxt2Hk0IYE jXehdHBbaJRDqi0zIsSLdQThEyo3N4Irdwdeyxm/52B30MmvNzxQl2Vd+pknLqzZUUUR kKWqsGRoMg+D8hGbJxNbylW+33S+RTMCyqpGGfIuXmUHdtIwr6y9BpQtXFrjZQRsSxT1 nUNlWvXTRV7r5proGkyFhuHXoJ4Pys5ocyZTTX41Gja7F7yvR4zB++INJM5127pncWrb UUx7B9gqHUS0kAA6rF8fDX2V73STWjVu2B5lnlm1P/dAnuy4pHpC41x5DIgbPvu3dBgl aw== Received: from beta.dmz-eu.st.com (beta.dmz-eu.st.com [164.129.1.35]) by mx07-00178001.pphosted.com (PPS) with ESMTPS id 3k31m9j4ap-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Tue, 11 Oct 2022 14:34:13 +0200 Received: from euls16034.sgp.st.com (euls16034.sgp.st.com [10.75.44.20]) by beta.dmz-eu.st.com (STMicroelectronics) with ESMTP id 2D6C910002A; Tue, 11 Oct 2022 14:34:09 +0200 (CEST) Received: from Webmail-eu.st.com (shfdag1node1.st.com [10.75.129.69]) by euls16034.sgp.st.com (STMicroelectronics) with ESMTP id 208732278A9; Tue, 11 Oct 2022 14:34:09 +0200 (CEST) Received: from localhost (10.75.127.121) by SHFDAG1NODE1.st.com (10.75.129.69) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256) id 15.1.2375.31; Tue, 11 Oct 2022 14:34:08 +0200 From: Benjamin Mugnier To: CC: , , , , , , , , , Benjamin Mugnier Subject: [PATCH v7 5/5] media: i2c: Add driver for ST VGXY61 camera sensor Date: Tue, 11 Oct 2022 14:30:30 +0200 Message-ID: <20221011123030.31802-3-benjamin.mugnier@foss.st.com> X-Mailer: git-send-email 2.25.1 In-Reply-To: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> References: <20221011120555.28889-1-benjamin.mugnier@foss.st.com> MIME-Version: 1.0 X-Originating-IP: [10.75.127.121] X-ClientProxiedBy: GPXDAG2NODE4.st.com (10.75.127.68) To SHFDAG1NODE1.st.com (10.75.129.69) X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.205,Aquarius:18.0.895,Hydra:6.0.545,FMLib:17.11.122.1 definitions=2022-10-11_07,2022-10-11_02,2022-06-22_01 Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The VGXY61 has a quad lanes CSI-2 output port running at 800mbps per lane, and supports RAW8, RAW10, RAW12, RAW14 and RAW16 formats. The driver handles both sensor types: - VG5661 and VG6661: 1.6 Mpx (1464 x 1104) 75fps. - VG5761 and VG6761: 2.3 Mpx (1944 x 1204) 60 fps. The driver supports: - HDR linearize mode, HDR substraction mode, and no HDR - GPIOs LEDs strobing - Digital binning and analog subsampling - Horizontal and vertical flip - Manual exposure - Analog and digital gains - Test patterns Signed-off-by: Benjamin Mugnier --- drivers/media/i2c/Kconfig | 10 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/st-vgxy61.c | 1964 +++++++++++++++++++++++++++++++++ 3 files changed, 1975 insertions(+) create mode 100644 drivers/media/i2c/st-vgxy61.c diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 7806d4b81716..065c05f6adbf 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -769,6 +769,16 @@ config VIDEO_SR030PC30 help This driver supports SR030PC30 VGA camera from Siliconfile +config VIDEO_ST_VGXY61 + tristate "ST VGXY61 sensor support" + depends on OF && GPIOLIB && VIDEO_DEV && I2C + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + help + This is a Video4Linux2 sensor driver for the ST VGXY61 + camera sensor. + config VIDEO_VS6624 tristate "ST VS6624 sensor support" depends on VIDEO_DEV && I2C diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 0a2933103dd9..891c6268f59f 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -117,6 +117,7 @@ obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o obj-$(CONFIG_VIDEO_SONY_BTF_MPX) += sony-btf-mpx.o obj-$(CONFIG_VIDEO_SR030PC30) += sr030pc30.o obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o +obj-$(CONFIG_VIDEO_ST_VGXY61) += st-vgxy61.o obj-$(CONFIG_VIDEO_TC358743) += tc358743.o obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o diff --git a/drivers/media/i2c/st-vgxy61.c b/drivers/media/i2c/st-vgxy61.c new file mode 100644 index 000000000000..7ff18d670813 --- /dev/null +++ b/drivers/media/i2c/st-vgxy61.c @@ -0,0 +1,1964 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for VGXY61 global shutter sensor family driver + * + * Copyright (C) 2022 STMicroelectronics SA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define VGXY61_REG_8BIT(n) ((1 << 16) | (n)) +#define VGXY61_REG_16BIT(n) ((2 << 16) | (n)) +#define VGXY61_REG_32BIT(n) ((4 << 16) | (n)) +#define VGXY61_REG_SIZE_SHIFT 16 +#define VGXY61_REG_ADDR_MASK 0xffff + +#define VGXY61_REG_MODEL_ID VGXY61_REG_16BIT(0x0000) +#define VG5661_MODEL_ID 0x5661 +#define VG5761_MODEL_ID 0x5761 +#define VGXY61_REG_REVISION VGXY61_REG_16BIT(0x0002) +#define VGXY61_REG_FWPATCH_REVISION VGXY61_REG_16BIT(0x0014) +#define VGXY61_REG_FWPATCH_START_ADDR VGXY61_REG_8BIT(0x2000) +#define VGXY61_REG_SYSTEM_FSM VGXY61_REG_8BIT(0x0020) +#define VGXY61_SYSTEM_FSM_SW_STBY 0x03 +#define VGXY61_SYSTEM_FSM_STREAMING 0x04 +#define VGXY61_REG_NVM VGXY61_REG_8BIT(0x0023) +#define VGXY61_NVM_OK 0x04 +#define VGXY61_REG_STBY VGXY61_REG_8BIT(0x0201) +#define VGXY61_STBY_NO_REQ 0 +#define VGXY61_STBY_REQ_TMP_READ BIT(2) +#define VGXY61_REG_STREAMING VGXY61_REG_8BIT(0x0202) +#define VGXY61_STREAMING_NO_REQ 0 +#define VGXY61_STREAMING_REQ_STOP BIT(0) +#define VGXY61_STREAMING_REQ_START BIT(1) +#define VGXY61_REG_EXT_CLOCK VGXY61_REG_32BIT(0x0220) +#define VGXY61_REG_CLK_PLL_PREDIV VGXY61_REG_8BIT(0x0224) +#define VGXY61_REG_CLK_SYS_PLL_MULT VGXY61_REG_8BIT(0x0225) +#define VGXY61_REG_GPIO_0_CTRL VGXY61_REG_8BIT(0x0236) +#define VGXY61_REG_GPIO_1_CTRL VGXY61_REG_8BIT(0x0237) +#define VGXY61_REG_GPIO_2_CTRL VGXY61_REG_8BIT(0x0238) +#define VGXY61_REG_GPIO_3_CTRL VGXY61_REG_8BIT(0x0239) +#define VGXY61_REG_SIGNALS_POLARITY_CTRL VGXY61_REG_8BIT(0x023b) +#define VGXY61_REG_LINE_LENGTH VGXY61_REG_16BIT(0x0300) +#define VGXY61_REG_ORIENTATION VGXY61_REG_8BIT(0x0302) +#define VGXY61_REG_VT_CTRL VGXY61_REG_8BIT(0x0304) +#define VGXY61_REG_FORMAT_CTRL VGXY61_REG_8BIT(0x0305) +#define VGXY61_REG_OIF_CTRL VGXY61_REG_16BIT(0x0306) +#define VGXY61_REG_OIF_ROI0_CTRL VGXY61_REG_8BIT(0x030a) +#define VGXY61_REG_ROI0_START_H VGXY61_REG_16BIT(0x0400) +#define VGXY61_REG_ROI0_START_V VGXY61_REG_16BIT(0x0402) +#define VGXY61_REG_ROI0_END_H VGXY61_REG_16BIT(0x0404) +#define VGXY61_REG_ROI0_END_V VGXY61_REG_16BIT(0x0406) +#define VGXY61_REG_PATGEN_CTRL VGXY61_REG_32BIT(0x0440) +#define VGXY61_PATGEN_LONG_ENABLE BIT(16) +#define VGXY61_PATGEN_SHORT_ENABLE BIT(0) +#define VGXY61_PATGEN_LONG_TYPE_SHIFT 18 +#define VGXY61_PATGEN_SHORT_TYPE_SHIFT 4 +#define VGXY61_REG_FRAME_CONTENT_CTRL VGXY61_REG_8BIT(0x0478) +#define VGXY61_REG_COARSE_EXPOSURE_LONG VGXY61_REG_16BIT(0x0500) +#define VGXY61_REG_COARSE_EXPOSURE_SHORT VGXY61_REG_16BIT(0x0504) +#define VGXY61_REG_ANALOG_GAIN VGXY61_REG_8BIT(0x0508) +#define VGXY61_REG_DIGITAL_GAIN_LONG VGXY61_REG_16BIT(0x050a) +#define VGXY61_REG_DIGITAL_GAIN_SHORT VGXY61_REG_16BIT(0x0512) +#define VGXY61_REG_FRAME_LENGTH VGXY61_REG_16BIT(0x051a) +#define VGXY61_REG_SIGNALS_CTRL VGXY61_REG_16BIT(0x0522) +#define VGXY61_SIGNALS_GPIO_ID_SHIFT 4 +#define VGXY61_REG_READOUT_CTRL VGXY61_REG_8BIT(0x0530) +#define VGXY61_REG_HDR_CTRL VGXY61_REG_8BIT(0x0532) +#define VGXY61_REG_PATGEN_LONG_DATA_GR VGXY61_REG_16BIT(0x092c) +#define VGXY61_REG_PATGEN_LONG_DATA_R VGXY61_REG_16BIT(0x092e) +#define VGXY61_REG_PATGEN_LONG_DATA_B VGXY61_REG_16BIT(0x0930) +#define VGXY61_REG_PATGEN_LONG_DATA_GB VGXY61_REG_16BIT(0x0932) +#define VGXY61_REG_PATGEN_SHORT_DATA_GR VGXY61_REG_16BIT(0x0950) +#define VGXY61_REG_PATGEN_SHORT_DATA_R VGXY61_REG_16BIT(0x0952) +#define VGXY61_REG_PATGEN_SHORT_DATA_B VGXY61_REG_16BIT(0x0954) +#define VGXY61_REG_PATGEN_SHORT_DATA_GB VGXY61_REG_16BIT(0x0956) +#define VGXY61_REG_BYPASS_CTRL VGXY61_REG_8BIT(0x0a60) + +#define VGX661_WIDTH 1464 +#define VGX661_HEIGHT 1104 +#define VGX761_WIDTH 1944 +#define VGX761_HEIGHT 1204 +#define VGX661_DEFAULT_MODE 1 +#define VGX761_DEFAULT_MODE 1 +#define VGX661_SHORT_ROT_TERM 93 +#define VGX761_SHORT_ROT_TERM 90 +#define VGXY61_EXPOS_ROT_TERM 66 +#define VGXY61_WRITE_MULTIPLE_CHUNK_MAX 16 +#define VGXY61_NB_GPIOS 4 +#define VGXY61_NB_POLARITIES 5 +#define VGXY61_FRAME_LENGTH_DEF 1313 +#define VGXY61_MIN_FRAME_LENGTH 1288 +#define VGXY61_MIN_EXPOSURE 10 +#define VGXY61_HDR_LINEAR_RATIO 10 +#define VGXY61_TIMEOUT_MS 500 +#define VGXY61_MEDIA_BUS_FMT_DEF MEDIA_BUS_FMT_Y8_1X8 + +#define VGXY61_FWPATCH_REVISION_MAJOR 2 +#define VGXY61_FWPATCH_REVISION_MINOR 0 +#define VGXY61_FWPATCH_REVISION_MICRO 5 + +static const u8 patch_array[] = { + 0xbf, 0x00, 0x05, 0x20, 0x06, 0x01, 0xe0, 0xe0, 0x04, 0x80, 0xe6, 0x45, + 0xed, 0x6f, 0xfe, 0xff, 0x14, 0x80, 0x1f, 0x84, 0x10, 0x42, 0x05, 0x7c, + 0x01, 0xc4, 0x1e, 0x80, 0xb6, 0x42, 0x00, 0xe0, 0x1e, 0x82, 0x1e, 0xc0, + 0x93, 0xdd, 0xc3, 0xc1, 0x0c, 0x04, 0x00, 0xfa, 0x86, 0x0d, 0x70, 0xe1, + 0x04, 0x98, 0x15, 0x00, 0x28, 0xe0, 0x14, 0x02, 0x08, 0xfc, 0x15, 0x40, + 0x28, 0xe0, 0x98, 0x58, 0xe0, 0xef, 0x04, 0x98, 0x0e, 0x04, 0x00, 0xf0, + 0x15, 0x00, 0x28, 0xe0, 0x19, 0xc8, 0x15, 0x40, 0x28, 0xe0, 0xc6, 0x41, + 0xfc, 0xe0, 0x14, 0x80, 0x1f, 0x84, 0x14, 0x02, 0xa0, 0xfc, 0x1e, 0x80, + 0x14, 0x80, 0x14, 0x02, 0x80, 0xfb, 0x14, 0x02, 0xe0, 0xfc, 0x1e, 0x80, + 0x14, 0xc0, 0x1f, 0x84, 0x14, 0x02, 0xa4, 0xfc, 0x1e, 0xc0, 0x14, 0xc0, + 0x14, 0x02, 0x80, 0xfb, 0x14, 0x02, 0xe4, 0xfc, 0x1e, 0xc0, 0x0c, 0x0c, + 0x00, 0xf2, 0x93, 0xdd, 0x86, 0x00, 0xf8, 0xe0, 0x04, 0x80, 0xc6, 0x03, + 0x70, 0xe1, 0x0e, 0x84, 0x93, 0xdd, 0xc3, 0xc1, 0x0c, 0x04, 0x00, 0xfa, + 0x6b, 0x80, 0x06, 0x40, 0x6c, 0xe1, 0x04, 0x80, 0x09, 0x00, 0xe0, 0xe0, + 0x0b, 0xa1, 0x95, 0x84, 0x05, 0x0c, 0x1c, 0xe0, 0x86, 0x02, 0xf9, 0x60, + 0xe0, 0xcf, 0x78, 0x6e, 0x80, 0xef, 0x25, 0x0c, 0x18, 0xe0, 0x05, 0x4c, + 0x1c, 0xe0, 0x86, 0x02, 0xf9, 0x60, 0xe0, 0xcf, 0x0b, 0x84, 0xd8, 0x6d, + 0x80, 0xef, 0x05, 0x4c, 0x18, 0xe0, 0x04, 0xd8, 0x0b, 0xa5, 0x95, 0x84, + 0x05, 0x0c, 0x2c, 0xe0, 0x06, 0x02, 0x01, 0x60, 0xe0, 0xce, 0x18, 0x6d, + 0x80, 0xef, 0x25, 0x0c, 0x30, 0xe0, 0x05, 0x4c, 0x2c, 0xe0, 0x06, 0x02, + 0x01, 0x60, 0xe0, 0xce, 0x0b, 0x84, 0x78, 0x6c, 0x80, 0xef, 0x05, 0x4c, + 0x30, 0xe0, 0x0c, 0x0c, 0x00, 0xf2, 0x93, 0xdd, 0x46, 0x01, 0x70, 0xe1, + 0x08, 0x80, 0x0b, 0xa1, 0x08, 0x5c, 0x00, 0xda, 0x06, 0x01, 0x68, 0xe1, + 0x04, 0x80, 0x4a, 0x40, 0x84, 0xe0, 0x08, 0x5c, 0x00, 0x9a, 0x06, 0x01, + 0xe0, 0xe0, 0x04, 0x80, 0x15, 0x00, 0x60, 0xe0, 0x19, 0xc4, 0x15, 0x40, + 0x60, 0xe0, 0x15, 0x00, 0x78, 0xe0, 0x19, 0xc4, 0x15, 0x40, 0x78, 0xe0, + 0x93, 0xdd, 0xc3, 0xc1, 0x46, 0x01, 0x70, 0xe1, 0x08, 0x80, 0x0b, 0xa1, + 0x08, 0x5c, 0x00, 0xda, 0x06, 0x01, 0x68, 0xe1, 0x04, 0x80, 0x4a, 0x40, + 0x84, 0xe0, 0x08, 0x5c, 0x00, 0x9a, 0x06, 0x01, 0xe0, 0xe0, 0x14, 0x80, + 0x25, 0x02, 0x54, 0xe0, 0x29, 0xc4, 0x25, 0x42, 0x54, 0xe0, 0x24, 0x80, + 0x35, 0x04, 0x6c, 0xe0, 0x39, 0xc4, 0x35, 0x44, 0x6c, 0xe0, 0x25, 0x02, + 0x64, 0xe0, 0x29, 0xc4, 0x25, 0x42, 0x64, 0xe0, 0x04, 0x80, 0x15, 0x00, + 0x7c, 0xe0, 0x19, 0xc4, 0x15, 0x40, 0x7c, 0xe0, 0x93, 0xdd, 0xc3, 0xc1, + 0x4c, 0x04, 0x7c, 0xfa, 0x86, 0x40, 0x98, 0xe0, 0x14, 0x80, 0x1b, 0xa1, + 0x06, 0x00, 0x00, 0xc0, 0x08, 0x42, 0x38, 0xdc, 0x08, 0x64, 0xa0, 0xef, + 0x86, 0x42, 0x3c, 0xe0, 0x68, 0x49, 0x80, 0xef, 0x6b, 0x80, 0x78, 0x53, + 0xc8, 0xef, 0xc6, 0x54, 0x6c, 0xe1, 0x7b, 0x80, 0xb5, 0x14, 0x0c, 0xf8, + 0x05, 0x14, 0x14, 0xf8, 0x1a, 0xac, 0x8a, 0x80, 0x0b, 0x90, 0x38, 0x55, + 0x80, 0xef, 0x1a, 0xae, 0x17, 0xc2, 0x03, 0x82, 0x88, 0x65, 0x80, 0xef, + 0x1b, 0x80, 0x0b, 0x8e, 0x68, 0x65, 0x80, 0xef, 0x9b, 0x80, 0x0b, 0x8c, + 0x08, 0x65, 0x80, 0xef, 0x6b, 0x80, 0x0b, 0x92, 0x1b, 0x8c, 0x98, 0x64, + 0x80, 0xef, 0x1a, 0xec, 0x9b, 0x80, 0x0b, 0x90, 0x95, 0x54, 0x10, 0xe0, + 0xa8, 0x53, 0x80, 0xef, 0x1a, 0xee, 0x17, 0xc2, 0x03, 0x82, 0xf8, 0x63, + 0x80, 0xef, 0x1b, 0x80, 0x0b, 0x8e, 0xd8, 0x63, 0x80, 0xef, 0x1b, 0x8c, + 0x68, 0x63, 0x80, 0xef, 0x6b, 0x80, 0x0b, 0x92, 0x65, 0x54, 0x14, 0xe0, + 0x08, 0x65, 0x84, 0xef, 0x68, 0x63, 0x80, 0xef, 0x7b, 0x80, 0x0b, 0x8c, + 0xa8, 0x64, 0x84, 0xef, 0x08, 0x63, 0x80, 0xef, 0x14, 0xe8, 0x46, 0x44, + 0x94, 0xe1, 0x24, 0x88, 0x4a, 0x4e, 0x04, 0xe0, 0x14, 0xea, 0x1a, 0x04, + 0x08, 0xe0, 0x0a, 0x40, 0x84, 0xed, 0x0c, 0x04, 0x00, 0xe2, 0x4a, 0x40, + 0x04, 0xe0, 0x19, 0x16, 0xc0, 0xe0, 0x0a, 0x40, 0x84, 0xed, 0x21, 0x54, + 0x60, 0xe0, 0x0c, 0x04, 0x00, 0xe2, 0x1b, 0xa5, 0x0e, 0xea, 0x01, 0x89, + 0x21, 0x54, 0x64, 0xe0, 0x7e, 0xe8, 0x65, 0x82, 0x1b, 0xa7, 0x26, 0x00, + 0x00, 0x80, 0xa5, 0x82, 0x1b, 0xa9, 0x65, 0x82, 0x1b, 0xa3, 0x01, 0x85, + 0x16, 0x00, 0x00, 0xc0, 0x01, 0x54, 0x04, 0xf8, 0x06, 0xaa, 0x01, 0x83, + 0x06, 0xa8, 0x65, 0x81, 0x06, 0xa8, 0x01, 0x54, 0x04, 0xf8, 0x01, 0x83, + 0x06, 0xaa, 0x09, 0x14, 0x18, 0xf8, 0x0b, 0xa1, 0x05, 0x84, 0xc6, 0x42, + 0xd4, 0xe0, 0x14, 0x84, 0x01, 0x83, 0x01, 0x54, 0x60, 0xe0, 0x01, 0x54, + 0x64, 0xe0, 0x0b, 0x02, 0x90, 0xe0, 0x10, 0x02, 0x90, 0xe5, 0x01, 0x54, + 0x88, 0xe0, 0xb5, 0x81, 0xc6, 0x40, 0xd4, 0xe0, 0x14, 0x80, 0x0b, 0x02, + 0xe0, 0xe4, 0x10, 0x02, 0x31, 0x66, 0x02, 0xc0, 0x01, 0x54, 0x88, 0xe0, + 0x1a, 0x84, 0x29, 0x14, 0x10, 0xe0, 0x1c, 0xaa, 0x2b, 0xa1, 0xf5, 0x82, + 0x25, 0x14, 0x10, 0xf8, 0x2b, 0x04, 0xa8, 0xe0, 0x20, 0x44, 0x0d, 0x70, + 0x03, 0xc0, 0x2b, 0xa1, 0x04, 0x00, 0x80, 0x9a, 0x02, 0x40, 0x84, 0x90, + 0x03, 0x54, 0x04, 0x80, 0x4c, 0x0c, 0x7c, 0xf2, 0x93, 0xdd, 0x00, 0x00, + 0x02, 0xa9, 0x00, 0x00, 0x64, 0x4a, 0x40, 0x00, 0x08, 0x2d, 0x58, 0xe0, + 0xa8, 0x98, 0x40, 0x00, 0x28, 0x07, 0x34, 0xe0, 0x05, 0xb9, 0x00, 0x00, + 0x28, 0x00, 0x41, 0x05, 0x88, 0x00, 0x41, 0x3c, 0x98, 0x00, 0x41, 0x52, + 0x04, 0x01, 0x41, 0x79, 0x3c, 0x01, 0x41, 0x6a, 0x3d, 0xfe, 0x00, 0x00, +}; + +static const char * const vgxy61_test_pattern_menu[] = { + "Disabled", + "Solid", + "Colorbar", + "Gradbar", + "Hgrey", + "Vgrey", + "Dgrey", + "PN28", +}; + +static const char * const vgxy61_hdr_mode_menu[] = { + "HDR linearize", + "HDR substraction", + "No HDR", +}; + +static const char * const vgxy61_supply_name[] = { + "VCORE", + "VDDIO", + "VANA", +}; + +static const s64 link_freq[] = { + /* + * MIPI output freq is 804Mhz / 2, as it uses both rising edge and + * falling edges to send data + */ + 402000000ULL +}; + +enum vgxy61_bin_mode { + VGXY61_BIN_MODE_NORMAL, + VGXY61_BIN_MODE_DIGITAL_X2, + VGXY61_BIN_MODE_DIGITAL_X4, +}; + +enum vgxy61_hdr_mode { + VGXY61_HDR_LINEAR, + VGXY61_HDR_SUB, + VGXY61_NO_HDR, +}; + +enum vgxy61_strobe_mode { + VGXY61_STROBE_DISABLED, + VGXY61_STROBE_LONG, + VGXY61_STROBE_ENABLED, +}; + +struct vgxy61_mode_info { + u32 width; + u32 height; + enum vgxy61_bin_mode bin_mode; + struct v4l2_rect crop; +}; + +struct vgxy61_fmt_desc { + u32 code; + u8 bpp; + u8 data_type; +}; + +static const struct vgxy61_fmt_desc vgxy61_supported_codes[] = { + { + .code = MEDIA_BUS_FMT_Y8_1X8, + .bpp = 8, + .data_type = MIPI_CSI2_DT_RAW8, + }, + { + .code = MEDIA_BUS_FMT_Y10_1X10, + .bpp = 10, + .data_type = MIPI_CSI2_DT_RAW10, + }, + { + .code = MEDIA_BUS_FMT_Y12_1X12, + .bpp = 12, + .data_type = MIPI_CSI2_DT_RAW12, + }, + { + .code = MEDIA_BUS_FMT_Y14_1X14, + .bpp = 14, + .data_type = MIPI_CSI2_DT_RAW14, + }, + { + .code = MEDIA_BUS_FMT_Y16_1X16, + .bpp = 16, + .data_type = MIPI_CSI2_DT_RAW16, + }, +}; + +static const struct vgxy61_mode_info vgx661_mode_data[] = { + { + .width = VGX661_WIDTH, + .height = VGX661_HEIGHT, + .bin_mode = VGXY61_BIN_MODE_NORMAL, + .crop = { + .left = 0, + .top = 0, + .width = VGX661_WIDTH, + .height = VGX661_HEIGHT, + }, + }, + { + .width = 1280, + .height = 720, + .bin_mode = VGXY61_BIN_MODE_NORMAL, + .crop = { + .left = 92, + .top = 192, + .width = 1280, + .height = 720, + }, + }, + { + .width = 640, + .height = 480, + .bin_mode = VGXY61_BIN_MODE_DIGITAL_X2, + .crop = { + .left = 92, + .top = 72, + .width = 1280, + .height = 960, + }, + }, + { + .width = 320, + .height = 240, + .bin_mode = VGXY61_BIN_MODE_DIGITAL_X4, + .crop = { + .left = 92, + .top = 72, + .width = 1280, + .height = 960, + }, + }, +}; + +static const struct vgxy61_mode_info vgx761_mode_data[] = { + { + .width = VGX761_WIDTH, + .height = VGX761_HEIGHT, + .bin_mode = VGXY61_BIN_MODE_NORMAL, + .crop = { + .left = 0, + .top = 0, + .width = VGX761_WIDTH, + .height = VGX761_HEIGHT, + }, + }, + { + .width = 1920, + .height = 1080, + .bin_mode = VGXY61_BIN_MODE_NORMAL, + .crop = { + .left = 12, + .top = 62, + .width = 1920, + .height = 1080, + }, + }, + { + .width = 1280, + .height = 720, + .bin_mode = VGXY61_BIN_MODE_NORMAL, + .crop = { + .left = 332, + .top = 242, + .width = 1280, + .height = 720, + }, + }, + { + .width = 640, + .height = 480, + .bin_mode = VGXY61_BIN_MODE_DIGITAL_X2, + .crop = { + .left = 332, + .top = 122, + .width = 1280, + .height = 960, + }, + }, + { + .width = 320, + .height = 240, + .bin_mode = VGXY61_BIN_MODE_DIGITAL_X4, + .crop = { + .left = 332, + .top = 122, + .width = 1280, + .height = 960, + }, + }, +}; + +struct vgxy61_dev { + struct i2c_client *i2c_client; + struct v4l2_subdev sd; + struct media_pad pad; + struct regulator_bulk_data supplies[ARRAY_SIZE(vgxy61_supply_name)]; + struct gpio_desc *reset_gpio; + struct clk *xclk; + u32 clk_freq; + u16 id; + u16 sensor_width; + u16 sensor_height; + u16 oif_ctrl; + unsigned int nb_of_lane; + u32 data_rate_in_mbps; + u32 pclk; + u16 line_length; + u16 rot_term; + bool gpios_polarity; + /* Lock to protect all members below */ + struct mutex lock; + struct v4l2_ctrl_handler ctrl_handler; + struct v4l2_ctrl *pixel_rate_ctrl; + struct v4l2_ctrl *expo_ctrl; + struct v4l2_ctrl *vblank_ctrl; + struct v4l2_ctrl *vflip_ctrl; + struct v4l2_ctrl *hflip_ctrl; + bool streaming; + struct v4l2_mbus_framefmt fmt; + const struct vgxy61_mode_info *sensor_modes; + unsigned int sensor_modes_nb; + const struct vgxy61_mode_info *default_mode; + const struct vgxy61_mode_info *current_mode; + bool hflip; + bool vflip; + enum vgxy61_hdr_mode hdr; + u16 expo_long; + u16 expo_short; + u16 expo_max; + u16 expo_min; + u16 vblank; + u16 vblank_min; + u16 frame_length; + u16 digital_gain; + u8 analog_gain; + enum vgxy61_strobe_mode strobe_mode; + u32 pattern; +}; + +static u8 get_bpp_by_code(__u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(vgxy61_supported_codes); i++) { + if (vgxy61_supported_codes[i].code == code) + return vgxy61_supported_codes[i].bpp; + } + /* Should never happen */ + WARN(1, "Unsupported code %d. default to 8 bpp", code); + return 8; +} + +static u8 get_data_type_by_code(__u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(vgxy61_supported_codes); i++) { + if (vgxy61_supported_codes[i].code == code) + return vgxy61_supported_codes[i].data_type; + } + /* Should never happen */ + WARN(1, "Unsupported code %d. default to MIPI_CSI2_DT_RAW8 data type", + code); + return MIPI_CSI2_DT_RAW8; +} + +static void compute_pll_parameters_by_freq(u32 freq, u8 *prediv, u8 *mult) +{ + const unsigned int predivs[] = {1, 2, 4}; + unsigned int i; + + /* + * Freq range is [6Mhz-27Mhz] already checked. + * Output of divider should be in [6Mhz-12Mhz[. + */ + for (i = 0; i < ARRAY_SIZE(predivs); i++) { + *prediv = predivs[i]; + if (freq / *prediv < 12 * HZ_PER_MHZ) + break; + } + WARN_ON(i == ARRAY_SIZE(predivs)); + + /* + * Target freq is 804Mhz. Don't change this as it will impact image + * quality. + */ + *mult = ((804 * HZ_PER_MHZ) * (*prediv) + freq / 2) / freq; +} + +static s32 get_pixel_rate(struct vgxy61_dev *sensor) +{ + return div64_u64((u64)sensor->data_rate_in_mbps * sensor->nb_of_lane, + get_bpp_by_code(sensor->fmt.code)); +} + +static inline struct vgxy61_dev *to_vgxy61_dev(struct v4l2_subdev *sd) +{ + return container_of(sd, struct vgxy61_dev, sd); +} + +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct vgxy61_dev, + ctrl_handler)->sd; +} + +static unsigned int get_chunk_size(struct vgxy61_dev *sensor) +{ + struct i2c_adapter *adapter = sensor->i2c_client->adapter; + int max_write_len = VGXY61_WRITE_MULTIPLE_CHUNK_MAX; + + if (adapter->quirks && adapter->quirks->max_write_len) + max_write_len = adapter->quirks->max_write_len - 2; + + max_write_len = min(max_write_len, VGXY61_WRITE_MULTIPLE_CHUNK_MAX); + + return max(max_write_len, 1); +} + +static int vgxy61_read_multiple(struct vgxy61_dev *sensor, u32 reg, + unsigned int len) +{ + struct i2c_client *client = sensor->i2c_client; + struct i2c_msg msg[2]; + u8 buf[2]; + u8 val[sizeof(u32)] = {0}; + int ret; + + if (len > sizeof(u32)) + return -EINVAL; + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + + msg[0].addr = client->addr; + msg[0].flags = client->flags; + msg[0].buf = buf; + msg[0].len = sizeof(buf); + + msg[1].addr = client->addr; + msg[1].flags = client->flags | I2C_M_RD; + msg[1].buf = val; + msg[1].len = len; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret < 0) { + dev_dbg(&client->dev, "%s: %x i2c_transfer, reg: %x => %d\n", + __func__, client->addr, reg, ret); + return ret; + } + + return get_unaligned_le32(val); +} + +static inline int vgxy61_read_reg(struct vgxy61_dev *sensor, u32 reg) +{ + return vgxy61_read_multiple(sensor, reg & VGXY61_REG_ADDR_MASK, + (reg >> VGXY61_REG_SIZE_SHIFT) & 7); +} + +static int vgxy61_write_multiple(struct vgxy61_dev *sensor, u32 reg, + const u8 *data, unsigned int len, int *err) +{ + struct i2c_client *client = sensor->i2c_client; + struct i2c_msg msg; + u8 buf[VGXY61_WRITE_MULTIPLE_CHUNK_MAX + 2]; + unsigned int i; + int ret; + + if (err && *err) + return *err; + + if (len > VGXY61_WRITE_MULTIPLE_CHUNK_MAX) + return -EINVAL; + buf[0] = reg >> 8; + buf[1] = reg & 0xff; + for (i = 0; i < len; i++) + buf[i + 2] = data[i]; + + msg.addr = client->addr; + msg.flags = client->flags; + msg.buf = buf; + msg.len = len + 2; + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + dev_dbg(&client->dev, "%s: i2c_transfer, reg: %x => %d\n", + __func__, reg, ret); + if (err) + *err = ret; + return ret; + } + + return 0; +} + +static int vgxy61_write_array(struct vgxy61_dev *sensor, u32 reg, + unsigned int nb, const u8 *array) +{ + const unsigned int chunk_size = get_chunk_size(sensor); + int ret; + unsigned int sz; + + while (nb) { + sz = min(nb, chunk_size); + ret = vgxy61_write_multiple(sensor, reg, array, sz, NULL); + if (ret < 0) + return ret; + nb -= sz; + reg += sz; + array += sz; + } + + return 0; +} + +static inline int vgxy61_write_reg(struct vgxy61_dev *sensor, u32 reg, u32 val, + int *err) +{ + return vgxy61_write_multiple(sensor, reg & VGXY61_REG_ADDR_MASK, + (u8 *)&val, + (reg >> VGXY61_REG_SIZE_SHIFT) & 7, err); +} + +static int vgxy61_poll_reg(struct vgxy61_dev *sensor, u32 reg, u8 poll_val, + unsigned int timeout_ms) +{ + const unsigned int loop_delay_ms = 10; + int ret; + + return read_poll_timeout(vgxy61_read_reg, ret, + ((ret < 0) || (ret == poll_val)), + loop_delay_ms * 1000, timeout_ms * 1000, + false, sensor, reg); +} + +static int vgxy61_wait_state(struct vgxy61_dev *sensor, int state, + unsigned int timeout_ms) +{ + return vgxy61_poll_reg(sensor, VGXY61_REG_SYSTEM_FSM, state, + timeout_ms); +} + +static int vgxy61_check_bw(struct vgxy61_dev *sensor) +{ + /* + * Simplification of time needed to send short packets and for the MIPI + * to add transition times (EoT, LPS, and SoT packet delimiters) needed + * by the protocol to go in low power between 2 packets of data. This + * is a mipi IP constant for the sensor. + */ + const unsigned int mipi_margin = 1056; + unsigned int binning_scale = sensor->current_mode->crop.height / + sensor->current_mode->height; + u8 bpp = get_bpp_by_code(sensor->fmt.code); + unsigned int max_bit_per_line; + unsigned int bit_per_line; + u64 line_rate; + + line_rate = sensor->nb_of_lane * (u64)sensor->data_rate_in_mbps * + sensor->line_length; + max_bit_per_line = div64_u64(line_rate, sensor->pclk) - mipi_margin; + bit_per_line = (bpp * sensor->current_mode->width) / binning_scale; + + return bit_per_line > max_bit_per_line ? -EINVAL : 0; +} + +static int vgxy61_apply_exposure(struct vgxy61_dev *sensor) +{ + int ret = 0; + + /* We first set expo to zero to avoid forbidden parameters couple */ + vgxy61_write_reg(sensor, VGXY61_REG_COARSE_EXPOSURE_SHORT, 0, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_COARSE_EXPOSURE_LONG, + sensor->expo_long, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_COARSE_EXPOSURE_SHORT, + sensor->expo_short, &ret); + + return ret; +} + +static int vgxy61_get_regulators(struct vgxy61_dev *sensor) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(vgxy61_supply_name); i++) + sensor->supplies[i].supply = vgxy61_supply_name[i]; + + return devm_regulator_bulk_get(&sensor->i2c_client->dev, + ARRAY_SIZE(vgxy61_supply_name), + sensor->supplies); +} + +static int vgxy61_apply_reset(struct vgxy61_dev *sensor) +{ + gpiod_set_value_cansleep(sensor->reset_gpio, 0); + usleep_range(5000, 10000); + gpiod_set_value_cansleep(sensor->reset_gpio, 1); + usleep_range(5000, 10000); + gpiod_set_value_cansleep(sensor->reset_gpio, 0); + usleep_range(40000, 100000); + return vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_SW_STBY, + VGXY61_TIMEOUT_MS); +} + +static void vgxy61_fill_framefmt(struct vgxy61_dev *sensor, + const struct vgxy61_mode_info *mode, + struct v4l2_mbus_framefmt *fmt, u32 code) +{ + fmt->code = code; + fmt->width = mode->width; + fmt->height = mode->height; + fmt->colorspace = V4L2_COLORSPACE_RAW; + fmt->field = V4L2_FIELD_NONE; + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + fmt->quantization = V4L2_QUANTIZATION_DEFAULT; + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; +} + +static int vgxy61_try_fmt_internal(struct v4l2_subdev *sd, + struct v4l2_mbus_framefmt *fmt, + const struct vgxy61_mode_info **new_mode) +{ + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + const struct vgxy61_mode_info *mode = sensor->sensor_modes; + unsigned int index; + + for (index = 0; index < ARRAY_SIZE(vgxy61_supported_codes); index++) { + if (vgxy61_supported_codes[index].code == fmt->code) + break; + } + if (index == ARRAY_SIZE(vgxy61_supported_codes)) + index = 0; + + mode = v4l2_find_nearest_size(sensor->sensor_modes, + sensor->sensor_modes_nb, width, height, + fmt->width, fmt->height); + if (new_mode) + *new_mode = mode; + + vgxy61_fill_framefmt(sensor, mode, fmt, + vgxy61_supported_codes[index].code); + + return 0; +} + +static int vgxy61_get_selection(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_selection *sel) +{ + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + + switch (sel->target) { + case V4L2_SEL_TGT_CROP: + sel->r = sensor->current_mode->crop; + return 0; + case V4L2_SEL_TGT_NATIVE_SIZE: + case V4L2_SEL_TGT_CROP_DEFAULT: + case V4L2_SEL_TGT_CROP_BOUNDS: + sel->r.top = 0; + sel->r.left = 0; + sel->r.width = sensor->sensor_width; + sel->r.height = sensor->sensor_height; + return 0; + } + + return -EINVAL; +} + +static int vgxy61_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + if (code->index >= ARRAY_SIZE(vgxy61_supported_codes)) + return -EINVAL; + + code->code = vgxy61_supported_codes[code->index].code; + + return 0; +} + +static int vgxy61_get_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + struct v4l2_mbus_framefmt *fmt; + + mutex_lock(&sensor->lock); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + fmt = v4l2_subdev_get_try_format(&sensor->sd, sd_state, + format->pad); + else + fmt = &sensor->fmt; + + format->format = *fmt; + + mutex_unlock(&sensor->lock); + + return 0; +} + +static u16 vgxy61_get_vblank_min(struct vgxy61_dev *sensor, + enum vgxy61_hdr_mode hdr) +{ + u16 min_vblank = VGXY61_MIN_FRAME_LENGTH - + sensor->current_mode->crop.height; + /* Ensure the first rule of thumb can't be negative */ + u16 min_vblank_hdr = VGXY61_MIN_EXPOSURE + sensor->rot_term + 1; + + if (hdr != VGXY61_NO_HDR) + return max(min_vblank, min_vblank_hdr); + return min_vblank; +} + +static int vgxy61_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + + if (fse->index >= sensor->sensor_modes_nb) + return -EINVAL; + + fse->min_width = sensor->sensor_modes[fse->index].width; + fse->max_width = fse->min_width; + fse->min_height = sensor->sensor_modes[fse->index].height; + fse->max_height = fse->min_height; + + return 0; +} + +static int vgxy61_update_analog_gain(struct vgxy61_dev *sensor, u32 target) +{ + sensor->analog_gain = target; + + if (sensor->streaming) + return vgxy61_write_reg(sensor, VGXY61_REG_ANALOG_GAIN, target, + NULL); + return 0; +} + +static int vgxy61_apply_digital_gain(struct vgxy61_dev *sensor, + u32 digital_gain) +{ + int ret = 0; + + /* + * For a monochrome version, configuring DIGITAL_GAIN_LONG_CH0 and + * DIGITAL_GAIN_SHORT_CH0 is enough to configure the gain of all + * four sub pixels. + */ + vgxy61_write_reg(sensor, VGXY61_REG_DIGITAL_GAIN_LONG, digital_gain, + &ret); + vgxy61_write_reg(sensor, VGXY61_REG_DIGITAL_GAIN_SHORT, digital_gain, + &ret); + + return ret; +} + +static int vgxy61_update_digital_gain(struct vgxy61_dev *sensor, u32 target) +{ + sensor->digital_gain = target; + + if (sensor->streaming) + return vgxy61_apply_digital_gain(sensor, sensor->digital_gain); + return 0; +} + +static int vgxy61_apply_patgen(struct vgxy61_dev *sensor, u32 index) +{ + static const u8 index2val[] = { + 0x0, 0x1, 0x2, 0x3, 0x10, 0x11, 0x12, 0x13 + }; + u32 pattern = index2val[index]; + u32 reg = (pattern << VGXY61_PATGEN_LONG_TYPE_SHIFT) | + (pattern << VGXY61_PATGEN_SHORT_TYPE_SHIFT); + + if (pattern) + reg |= VGXY61_PATGEN_LONG_ENABLE | VGXY61_PATGEN_SHORT_ENABLE; + return vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_CTRL, reg, NULL); +} + +static int vgxy61_update_patgen(struct vgxy61_dev *sensor, u32 pattern) +{ + sensor->pattern = pattern; + + if (sensor->streaming) + return vgxy61_apply_patgen(sensor, sensor->pattern); + return 0; +} + +static int vgxy61_apply_gpiox_strobe_mode(struct vgxy61_dev *sensor, + enum vgxy61_strobe_mode mode, + unsigned int idx) +{ + static const u8 index2val[] = {0x0, 0x1, 0x3}; + u16 reg; + + reg = vgxy61_read_reg(sensor, VGXY61_REG_SIGNALS_CTRL); + if (reg < 0) + return reg; + reg &= ~(0xf << (idx * VGXY61_SIGNALS_GPIO_ID_SHIFT)); + reg |= index2val[mode] << (idx * VGXY61_SIGNALS_GPIO_ID_SHIFT); + + return vgxy61_write_reg(sensor, VGXY61_REG_SIGNALS_CTRL, reg, NULL); +} + +static int vgxy61_update_gpios_strobe_mode(struct vgxy61_dev *sensor, + enum vgxy61_hdr_mode hdr) +{ + unsigned int i; + int ret; + + switch (hdr) { + case VGXY61_HDR_LINEAR: + sensor->strobe_mode = VGXY61_STROBE_ENABLED; + break; + case VGXY61_HDR_SUB: + case VGXY61_NO_HDR: + sensor->strobe_mode = VGXY61_STROBE_LONG; + break; + default: + /* Should never happen */ + WARN_ON(true); + break; + } + + if (!sensor->streaming) + return 0; + + for (i = 0; i < VGXY61_NB_GPIOS; i++) { + ret = vgxy61_apply_gpiox_strobe_mode(sensor, + sensor->strobe_mode, + i); + if (ret) + return ret; + } + + return 0; +} + +static int vgxy61_update_gpios_strobe_polarity(struct vgxy61_dev *sensor, + bool polarity) +{ + int ret = 0; + + if (sensor->streaming) + return -EBUSY; + + vgxy61_write_reg(sensor, VGXY61_REG_GPIO_0_CTRL, polarity << 1, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_GPIO_1_CTRL, polarity << 1, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_GPIO_2_CTRL, polarity << 1, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_GPIO_3_CTRL, polarity << 1, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_SIGNALS_POLARITY_CTRL, polarity, + &ret); + + return ret; +} + +static u32 vgxy61_get_expo_long_max(struct vgxy61_dev *sensor, + unsigned int short_expo_ratio) +{ + u32 first_rot_max_expo, second_rot_max_expo, third_rot_max_expo; + + /* Apply sensor's rules of thumb */ + /* + * Short exposure + height must be less than frame length to avoid bad + * pixel line at the botom of the image + */ + first_rot_max_expo = + ((sensor->frame_length - sensor->current_mode->crop.height - + sensor->rot_term) * short_expo_ratio) - 1; + + /* + * Total exposition time must be less than frame length to avoid sensor + * crash + */ + second_rot_max_expo = + (((sensor->frame_length - VGXY61_EXPOS_ROT_TERM) * + short_expo_ratio) / (short_expo_ratio + 1)) - 1; + + /* + * Short exposure times 71 must be less than frame length to avoid + * sensor crash + */ + third_rot_max_expo = (sensor->frame_length / 71) * short_expo_ratio; + + /* Take the minimum from all rules */ + return min(min(first_rot_max_expo, second_rot_max_expo), + third_rot_max_expo); +} + +static int vgxy61_update_exposure(struct vgxy61_dev *sensor, u16 new_expo_long, + enum vgxy61_hdr_mode hdr) +{ + struct i2c_client *client = sensor->i2c_client; + u16 new_expo_short = 0; + u16 expo_short_max = 0; + u16 expo_long_min = VGXY61_MIN_EXPOSURE; + u16 expo_long_max; + + /* Compute short exposure according to hdr mode and long exposure */ + switch (hdr) { + case VGXY61_HDR_LINEAR: + /* + * Take ratio into account for minimal exposures in + * VGXY61_HDR_LINEAR + */ + expo_long_min = VGXY61_MIN_EXPOSURE * VGXY61_HDR_LINEAR_RATIO; + new_expo_long = max(expo_long_min, new_expo_long); + + expo_long_max = + vgxy61_get_expo_long_max(sensor, + VGXY61_HDR_LINEAR_RATIO); + expo_short_max = (expo_long_max + + (VGXY61_HDR_LINEAR_RATIO / 2)) / + VGXY61_HDR_LINEAR_RATIO; + new_expo_short = (new_expo_long + + (VGXY61_HDR_LINEAR_RATIO / 2)) / + VGXY61_HDR_LINEAR_RATIO; + break; + case VGXY61_HDR_SUB: + new_expo_long = max(expo_long_min, new_expo_long); + + expo_long_max = vgxy61_get_expo_long_max(sensor, 1); + /* Short and long are the same in VGXY61_HDR_SUB */ + expo_short_max = expo_long_max; + new_expo_short = new_expo_long; + break; + case VGXY61_NO_HDR: + new_expo_long = max(expo_long_min, new_expo_long); + + /* + * As short expo is 0 here, only the second rule of thumb + * applies, see vgxy61_get_expo_long_max for more + */ + expo_long_max = sensor->frame_length - VGXY61_EXPOS_ROT_TERM; + break; + default: + /* Should never happen */ + WARN_ON(true); + break; + } + + /* If this happens, something is wrong with formulas */ + WARN_ON(expo_long_min > expo_long_max); + + if (new_expo_long > expo_long_max) { + dev_warn(&client->dev, "Exposure %d too high, clamping to %d\n", + new_expo_long, expo_long_max); + new_expo_long = expo_long_max; + new_expo_short = expo_short_max; + } + + sensor->expo_long = new_expo_long; + sensor->expo_short = new_expo_short; + sensor->expo_max = expo_long_max; + sensor->expo_min = expo_long_min; + + if (sensor->streaming) + return vgxy61_apply_exposure(sensor); + return 0; +} + +static int vgxy61_apply_framelength(struct vgxy61_dev *sensor) +{ + return vgxy61_write_reg(sensor, VGXY61_REG_FRAME_LENGTH, + sensor->frame_length, NULL); +} + +static int vgxy61_update_vblank(struct vgxy61_dev *sensor, u16 vblank, + enum vgxy61_hdr_mode hdr) +{ + int ret; + + sensor->vblank_min = vgxy61_get_vblank_min(sensor, hdr); + sensor->vblank = max(sensor->vblank_min, vblank); + sensor->frame_length = sensor->current_mode->crop.height + + sensor->vblank; + + /* Update exposure according to vblank */ + ret = vgxy61_update_exposure(sensor, sensor->expo_long, hdr); + if (ret) + return ret; + + if (sensor->streaming) + return vgxy61_apply_framelength(sensor); + return 0; +} + +static int vgxy61_apply_hdr(struct vgxy61_dev *sensor, + enum vgxy61_hdr_mode index) +{ + static const u8 index2val[] = {0x1, 0x4, 0xa}; + + return vgxy61_write_reg(sensor, VGXY61_REG_HDR_CTRL, index2val[index], + NULL); +} + +static int vgxy61_update_hdr(struct vgxy61_dev *sensor, + enum vgxy61_hdr_mode index) +{ + int ret; + + /* + * vblank and short exposure change according to HDR mode, do it first + * as it can violate sensors 'rule of thumbs' and therefore will require + * to change the long exposure. + */ + ret = vgxy61_update_vblank(sensor, sensor->vblank, index); + if (ret) + return ret; + + /* Update strobe mode according to HDR */ + ret = vgxy61_update_gpios_strobe_mode(sensor, index); + if (ret) + return ret; + + sensor->hdr = index; + + if (sensor->streaming) + return vgxy61_apply_hdr(sensor, sensor->hdr); + return 0; +} + +static int vgxy61_apply_settings(struct vgxy61_dev *sensor) +{ + int ret; + unsigned int i; + + ret = vgxy61_apply_hdr(sensor, sensor->hdr); + if (ret) + return ret; + + ret = vgxy61_apply_framelength(sensor); + if (ret) + return ret; + + ret = vgxy61_apply_exposure(sensor); + if (ret) + return ret; + + ret = vgxy61_write_reg(sensor, VGXY61_REG_ANALOG_GAIN, + sensor->analog_gain, NULL); + if (ret) + return ret; + ret = vgxy61_apply_digital_gain(sensor, sensor->digital_gain); + if (ret) + return ret; + + ret = vgxy61_write_reg(sensor, VGXY61_REG_ORIENTATION, + sensor->hflip | (sensor->vflip << 1), NULL); + if (ret) + return ret; + + ret = vgxy61_apply_patgen(sensor, sensor->pattern); + if (ret) + return ret; + + for (i = 0; i < VGXY61_NB_GPIOS; i++) { + ret = vgxy61_apply_gpiox_strobe_mode(sensor, + sensor->strobe_mode, i); + if (ret) + return ret; + } + + return 0; +} + +static int vgxy61_stream_enable(struct vgxy61_dev *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd); + const struct v4l2_rect *crop = &sensor->current_mode->crop; + int ret = 0; + + ret = vgxy61_check_bw(sensor); + if (ret) + return ret; + + ret = pm_runtime_get_sync(&client->dev); + if (ret < 0) { + pm_runtime_put_autosuspend(&client->dev); + return ret; + } + + vgxy61_write_reg(sensor, VGXY61_REG_FORMAT_CTRL, + get_bpp_by_code(sensor->fmt.code), &ret); + vgxy61_write_reg(sensor, VGXY61_REG_OIF_ROI0_CTRL, + get_data_type_by_code(sensor->fmt.code), &ret); + + vgxy61_write_reg(sensor, VGXY61_REG_READOUT_CTRL, + sensor->current_mode->bin_mode, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_ROI0_START_H, crop->left, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_ROI0_END_H, + crop->left + crop->width - 1, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_ROI0_START_V, crop->top, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_ROI0_END_V, + crop->top + crop->height - 1, &ret); + if (ret) + goto err_rpm_put; + + ret = vgxy61_apply_settings(sensor); + if (ret) + goto err_rpm_put; + + ret = vgxy61_write_reg(sensor, VGXY61_REG_STREAMING, + VGXY61_STREAMING_REQ_START, NULL); + if (ret) + goto err_rpm_put; + + ret = vgxy61_poll_reg(sensor, VGXY61_REG_STREAMING, + VGXY61_STREAMING_NO_REQ, VGXY61_TIMEOUT_MS); + if (ret) + goto err_rpm_put; + + ret = vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_STREAMING, + VGXY61_TIMEOUT_MS); + if (ret) + goto err_rpm_put; + + /* vflip and hflip cannot change during streaming */ + __v4l2_ctrl_grab(sensor->vflip_ctrl, true); + __v4l2_ctrl_grab(sensor->hflip_ctrl, true); + + return 0; + +err_rpm_put: + pm_runtime_put(&client->dev); + return ret; +} + +static int vgxy61_stream_disable(struct vgxy61_dev *sensor) +{ + struct i2c_client *client = v4l2_get_subdevdata(&sensor->sd); + int ret; + + ret = vgxy61_write_reg(sensor, VGXY61_REG_STREAMING, + VGXY61_STREAMING_REQ_STOP, NULL); + if (ret) + goto err_str_dis; + + ret = vgxy61_poll_reg(sensor, VGXY61_REG_STREAMING, + VGXY61_STREAMING_NO_REQ, 2000); + if (ret) + goto err_str_dis; + + ret = vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_SW_STBY, + VGXY61_TIMEOUT_MS); + if (ret) + goto err_str_dis; + + __v4l2_ctrl_grab(sensor->vflip_ctrl, false); + __v4l2_ctrl_grab(sensor->hflip_ctrl, false); + +err_str_dis: + if (ret) + WARN(1, "Can't disable stream"); + pm_runtime_put(&client->dev); + + return ret; +} + +static int vgxy61_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + int ret = 0; + + mutex_lock(&sensor->lock); + + ret = enable ? vgxy61_stream_enable(sensor) : + vgxy61_stream_disable(sensor); + if (!ret) + sensor->streaming = enable; + + mutex_unlock(&sensor->lock); + + return ret; +} + +static int vgxy61_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + const struct vgxy61_mode_info *new_mode; + struct v4l2_mbus_framefmt *fmt; + int ret; + + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto out; + } + + ret = vgxy61_try_fmt_internal(sd, &format->format, &new_mode); + if (ret) + goto out; + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + fmt = v4l2_subdev_get_try_format(sd, sd_state, 0); + *fmt = format->format; + } else if (sensor->current_mode != new_mode || + sensor->fmt.code != format->format.code) { + fmt = &sensor->fmt; + *fmt = format->format; + + sensor->current_mode = new_mode; + + /* Reset vblank and framelength to default */ + ret = vgxy61_update_vblank(sensor, + VGXY61_FRAME_LENGTH_DEF - + new_mode->crop.height, + sensor->hdr); + + /* Update controls to reflect new mode */ + __v4l2_ctrl_s_ctrl_int64(sensor->pixel_rate_ctrl, + get_pixel_rate(sensor)); + __v4l2_ctrl_modify_range(sensor->vblank_ctrl, + sensor->vblank_min, + 0xffff - new_mode->crop.height, + 1, sensor->vblank); + __v4l2_ctrl_s_ctrl(sensor->vblank_ctrl, sensor->vblank); + __v4l2_ctrl_modify_range(sensor->expo_ctrl, sensor->expo_min, + sensor->expo_max, 1, + sensor->expo_long); + } + +out: + mutex_unlock(&sensor->lock); + + return ret; +} + +static int vgxy61_init_cfg(struct v4l2_subdev *sd, + struct v4l2_subdev_state *sd_state) +{ + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + struct v4l2_subdev_format fmt = { 0 }; + + sensor->current_mode = sensor->default_mode; + vgxy61_fill_framefmt(sensor, sensor->current_mode, &fmt.format, + VGXY61_MEDIA_BUS_FMT_DEF); + + return vgxy61_set_fmt(sd, sd_state, &fmt); +} + +static int vgxy61_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + const struct vgxy61_mode_info *cur_mode = sensor->current_mode; + int ret; + + switch (ctrl->id) { + case V4L2_CID_EXPOSURE: + ret = vgxy61_update_exposure(sensor, ctrl->val, sensor->hdr); + ctrl->val = sensor->expo_long; + break; + case V4L2_CID_ANALOGUE_GAIN: + ret = vgxy61_update_analog_gain(sensor, ctrl->val); + break; + case V4L2_CID_DIGITAL_GAIN: + ret = vgxy61_update_digital_gain(sensor, ctrl->val); + break; + case V4L2_CID_VFLIP: + case V4L2_CID_HFLIP: + if (sensor->streaming) { + ret = -EBUSY; + break; + } + if (ctrl->id == V4L2_CID_VFLIP) + sensor->vflip = ctrl->val; + if (ctrl->id == V4L2_CID_HFLIP) + sensor->hflip = ctrl->val; + ret = 0; + break; + case V4L2_CID_TEST_PATTERN: + ret = vgxy61_update_patgen(sensor, ctrl->val); + break; + case V4L2_CID_HDR_SENSOR_MODE: + ret = vgxy61_update_hdr(sensor, ctrl->val); + /* Update vblank and exposure controls to match new hdr */ + __v4l2_ctrl_modify_range(sensor->vblank_ctrl, + sensor->vblank_min, + 0xffff - cur_mode->crop.height, + 1, sensor->vblank); + __v4l2_ctrl_modify_range(sensor->expo_ctrl, sensor->expo_min, + sensor->expo_max, 1, + sensor->expo_long); + break; + case V4L2_CID_VBLANK: + ret = vgxy61_update_vblank(sensor, ctrl->val, sensor->hdr); + /* Update exposure control to match new vblank */ + __v4l2_ctrl_modify_range(sensor->expo_ctrl, sensor->expo_min, + sensor->expo_max, 1, + sensor->expo_long); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct v4l2_ctrl_ops vgxy61_ctrl_ops = { + .s_ctrl = vgxy61_s_ctrl, +}; + +static int vgxy61_init_controls(struct vgxy61_dev *sensor) +{ + const struct v4l2_ctrl_ops *ops = &vgxy61_ctrl_ops; + struct v4l2_ctrl_handler *hdl = &sensor->ctrl_handler; + const struct vgxy61_mode_info *cur_mode = sensor->current_mode; + struct v4l2_ctrl *ctrl; + int ret; + + v4l2_ctrl_handler_init(hdl, 16); + /* We can use our own mutex for the ctrl lock */ + hdl->lock = &sensor->lock; + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_ANALOGUE_GAIN, 0, 0x1c, 1, + sensor->analog_gain); + v4l2_ctrl_new_std(hdl, ops, V4L2_CID_DIGITAL_GAIN, 0, 0xfff, 1, + sensor->digital_gain); + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(vgxy61_test_pattern_menu) - 1, + 0, 0, vgxy61_test_pattern_menu); + ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, 0, + sensor->line_length, 1, + sensor->line_length - cur_mode->width); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + ctrl = v4l2_ctrl_new_int_menu(hdl, ops, V4L2_CID_LINK_FREQ, + ARRAY_SIZE(link_freq) - 1, 0, link_freq); + if (ctrl) + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_HDR_SENSOR_MODE, + ARRAY_SIZE(vgxy61_hdr_mode_menu) - 1, 0, + VGXY61_NO_HDR, vgxy61_hdr_mode_menu); + + /* + * Keep a pointer to these controls as we need to update them when + * setting the format + */ + sensor->pixel_rate_ctrl = v4l2_ctrl_new_std(hdl, ops, + V4L2_CID_PIXEL_RATE, 1, + INT_MAX, 1, + get_pixel_rate(sensor)); + if (sensor->pixel_rate_ctrl) + sensor->pixel_rate_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + sensor->expo_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, + sensor->expo_min, + sensor->expo_max, 1, + sensor->expo_long); + sensor->vblank_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK, + sensor->vblank_min, + 0xffff - cur_mode->crop.height, + 1, sensor->vblank); + sensor->vflip_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VFLIP, + 0, 1, 1, sensor->vflip); + sensor->hflip_ctrl = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HFLIP, + 0, 1, 1, sensor->hflip); + + if (hdl->error) { + ret = hdl->error; + goto free_ctrls; + } + + sensor->sd.ctrl_handler = hdl; + return 0; + +free_ctrls: + v4l2_ctrl_handler_free(hdl); + return ret; +} + +static const struct v4l2_subdev_video_ops vgxy61_video_ops = { + .s_stream = vgxy61_s_stream, +}; + +static const struct v4l2_subdev_pad_ops vgxy61_pad_ops = { + .init_cfg = vgxy61_init_cfg, + .enum_mbus_code = vgxy61_enum_mbus_code, + .get_fmt = vgxy61_get_fmt, + .set_fmt = vgxy61_set_fmt, + .get_selection = vgxy61_get_selection, + .enum_frame_size = vgxy61_enum_frame_size, +}; + +static const struct v4l2_subdev_ops vgxy61_subdev_ops = { + .video = &vgxy61_video_ops, + .pad = &vgxy61_pad_ops, +}; + +static const struct media_entity_operations vgxy61_subdev_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +static int vgxy61_tx_from_ep(struct vgxy61_dev *sensor, + struct fwnode_handle *handle) +{ + struct v4l2_fwnode_endpoint ep = { .bus_type = V4L2_MBUS_CSI2_DPHY }; + struct i2c_client *client = sensor->i2c_client; + u32 log2phy[VGXY61_NB_POLARITIES] = {~0, ~0, ~0, ~0, ~0}; + u32 phy2log[VGXY61_NB_POLARITIES] = {~0, ~0, ~0, ~0, ~0}; + int polarities[VGXY61_NB_POLARITIES] = {0, 0, 0, 0, 0}; + int l_nb; + unsigned int p, l, i; + int ret; + + ret = v4l2_fwnode_endpoint_alloc_parse(handle, &ep); + if (ret) + return -EINVAL; + + l_nb = ep.bus.mipi_csi2.num_data_lanes; + if (l_nb != 1 && l_nb != 2 && l_nb != 4) { + dev_err(&client->dev, "invalid data lane number %d\n", l_nb); + goto error_ep; + } + + /* Build log2phy, phy2log and polarities from ep info */ + log2phy[0] = ep.bus.mipi_csi2.clock_lane; + phy2log[log2phy[0]] = 0; + for (l = 1; l < l_nb + 1; l++) { + log2phy[l] = ep.bus.mipi_csi2.data_lanes[l - 1]; + phy2log[log2phy[l]] = l; + } + /* + * Then fill remaining slots for every physical slot to have something + * valid for hardware stuff. + */ + for (p = 0; p < VGXY61_NB_POLARITIES; p++) { + if (phy2log[p] != ~0) + continue; + phy2log[p] = l; + log2phy[l] = p; + l++; + } + for (l = 0; l < l_nb + 1; l++) + polarities[l] = ep.bus.mipi_csi2.lane_polarities[l]; + + if (log2phy[0] != 0) { + dev_err(&client->dev, "clk lane must be map to physical lane 0\n"); + goto error_ep; + } + sensor->oif_ctrl = (polarities[4] << 15) + ((phy2log[4] - 1) << 13) + + (polarities[3] << 12) + ((phy2log[3] - 1) << 10) + + (polarities[2] << 9) + ((phy2log[2] - 1) << 7) + + (polarities[1] << 6) + ((phy2log[1] - 1) << 4) + + (polarities[0] << 3) + + l_nb; + sensor->nb_of_lane = l_nb; + + dev_dbg(&client->dev, "tx uses %d lanes", l_nb); + for (i = 0; i < 5; i++) { + dev_dbg(&client->dev, "log2phy[%d] = %d\n", i, log2phy[i]); + dev_dbg(&client->dev, "phy2log[%d] = %d\n", i, phy2log[i]); + dev_dbg(&client->dev, "polarity[%d] = %d\n", i, polarities[i]); + } + dev_dbg(&client->dev, "oif_ctrl = 0x%04x\n", sensor->oif_ctrl); + + v4l2_fwnode_endpoint_free(&ep); + + return 0; + +error_ep: + v4l2_fwnode_endpoint_free(&ep); + + return -EINVAL; +} + +static int vgxy61_configure(struct vgxy61_dev *sensor) +{ + u32 sensor_freq; + u8 prediv, mult; + u16 line_length; + int ret = 0; + + compute_pll_parameters_by_freq(sensor->clk_freq, &prediv, &mult); + sensor_freq = (mult * sensor->clk_freq) / prediv; + /* Frequency to data rate is 1:1 ratio for MIPI */ + sensor->data_rate_in_mbps = sensor_freq; + /* Video timing ISP path (pixel clock) requires 804/5 mhz = 160 mhz */ + sensor->pclk = sensor_freq / 5; + + line_length = vgxy61_read_reg(sensor, VGXY61_REG_LINE_LENGTH); + if (line_length < 0) + return line_length; + sensor->line_length = line_length; + vgxy61_write_reg(sensor, VGXY61_REG_EXT_CLOCK, sensor->clk_freq, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_CLK_PLL_PREDIV, prediv, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_CLK_SYS_PLL_MULT, mult, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_OIF_CTRL, sensor->oif_ctrl, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_FRAME_CONTENT_CTRL, 0, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_BYPASS_CTRL, 4, &ret); + if (ret) + return ret; + vgxy61_update_gpios_strobe_polarity(sensor, sensor->gpios_polarity); + /* Set pattern generator solid to middle value */ + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_GR, 0x800, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_R, 0x800, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_B, 0x800, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_LONG_DATA_GB, 0x800, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_GR, 0x800, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_R, 0x800, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_B, 0x800, &ret); + vgxy61_write_reg(sensor, VGXY61_REG_PATGEN_SHORT_DATA_GB, 0x800, &ret); + if (ret) + return ret; + + return 0; +} + +static int vgxy61_patch(struct vgxy61_dev *sensor) +{ + struct i2c_client *client = sensor->i2c_client; + u16 patch; + int ret; + + ret = vgxy61_write_array(sensor, VGXY61_REG_FWPATCH_START_ADDR, + sizeof(patch_array), patch_array); + if (ret) + return ret; + + ret = vgxy61_write_reg(sensor, VGXY61_REG_STBY, 0x10, NULL); + if (ret) + return ret; + + ret = vgxy61_poll_reg(sensor, VGXY61_REG_STBY, 0, VGXY61_TIMEOUT_MS); + if (ret) + return ret; + + patch = vgxy61_read_reg(sensor, VGXY61_REG_FWPATCH_REVISION); + if (patch < 0) + return patch; + + if (patch != (VGXY61_FWPATCH_REVISION_MAJOR << 12) + + (VGXY61_FWPATCH_REVISION_MINOR << 8) + + VGXY61_FWPATCH_REVISION_MICRO) { + dev_err(&client->dev, "bad patch version expected %d.%d.%d got %d.%d.%d\n", + VGXY61_FWPATCH_REVISION_MAJOR, + VGXY61_FWPATCH_REVISION_MINOR, + VGXY61_FWPATCH_REVISION_MICRO, + patch >> 12, (patch >> 8) & 0x0f, patch & 0xff); + return -ENODEV; + } + dev_dbg(&client->dev, "patch %d.%d.%d applied\n", + patch >> 12, (patch >> 8) & 0x0f, patch & 0xff); + + return 0; +} + +static int vgxy61_detect_cut_version(struct vgxy61_dev *sensor) +{ + struct i2c_client *client = sensor->i2c_client; + u16 device_rev; + + device_rev = vgxy61_read_reg(sensor, VGXY61_REG_REVISION); + if (device_rev < 0) + return device_rev; + + switch (device_rev >> 8) { + case 0xA: + dev_dbg(&client->dev, "Cut1 detected\n"); + dev_err(&client->dev, "Cut1 not supported by this driver\n"); + return -ENODEV; + case 0xB: + dev_dbg(&client->dev, "Cut2 detected\n"); + return 0; + case 0xC: + dev_dbg(&client->dev, "Cut3 detected\n"); + return 0; + default: + dev_err(&client->dev, "Unable to detect cut version\n"); + return -ENODEV; + } +} + +static int vgxy61_detect(struct vgxy61_dev *sensor) +{ + struct i2c_client *client = sensor->i2c_client; + u16 id = 0; + int ret; + u8 st; + + id = vgxy61_read_reg(sensor, VGXY61_REG_MODEL_ID); + if (id < 0) + return id; + if (id != VG5661_MODEL_ID && id != VG5761_MODEL_ID) { + dev_warn(&client->dev, "Unsupported sensor id %x\n", id); + return -ENODEV; + } + dev_dbg(&client->dev, "detected sensor id = 0x%04x\n", id); + sensor->id = id; + + ret = vgxy61_wait_state(sensor, VGXY61_SYSTEM_FSM_SW_STBY, + VGXY61_TIMEOUT_MS); + if (ret) + return ret; + + st = vgxy61_read_reg(sensor, VGXY61_REG_NVM); + if (st < 0) + return st; + if (st != VGXY61_NVM_OK) + dev_warn(&client->dev, "Bad nvm state got %d\n", st); + + ret = vgxy61_detect_cut_version(sensor); + if (ret) + return ret; + + return 0; +} + +/* Power/clock management functions */ +static int vgxy61_power_on(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + int ret; + + ret = clk_prepare_enable(sensor->xclk); + if (ret) { + dev_err(&client->dev, "failed to enable clock %d\n", ret); + goto disable_bulk; + } + + if (sensor->reset_gpio) { + ret = vgxy61_apply_reset(sensor); + if (ret) { + dev_err(&client->dev, "sensor reset failed %d\n", ret); + goto disable_clock; + } + } + + ret = vgxy61_patch(sensor); + if (ret) { + dev_err(&client->dev, "sensor patch failed %d\n", ret); + goto disable_clock; + } + + ret = vgxy61_configure(sensor); + if (ret) { + dev_err(&client->dev, "sensor configuration failed %d\n", ret); + goto disable_clock; + } + + return 0; + +disable_clock: + clk_disable_unprepare(sensor->xclk); +disable_bulk: + regulator_bulk_disable(ARRAY_SIZE(vgxy61_supply_name), + sensor->supplies); + + return ret; +} + +static int vgxy61_power_off(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + + clk_disable_unprepare(sensor->xclk); + regulator_bulk_disable(ARRAY_SIZE(vgxy61_supply_name), + sensor->supplies); + return 0; +} + +static void vgxy61_fill_sensor_param(struct vgxy61_dev *sensor) +{ + if (sensor->id == VG5761_MODEL_ID) { + sensor->sensor_width = VGX761_WIDTH; + sensor->sensor_height = VGX761_HEIGHT; + sensor->sensor_modes = vgx761_mode_data; + sensor->sensor_modes_nb = ARRAY_SIZE(vgx761_mode_data); + sensor->default_mode = &vgx761_mode_data[VGX761_DEFAULT_MODE]; + sensor->rot_term = VGX761_SHORT_ROT_TERM; + } else if (sensor->id == VG5661_MODEL_ID) { + sensor->sensor_width = VGX661_WIDTH; + sensor->sensor_height = VGX661_HEIGHT; + sensor->sensor_modes = vgx661_mode_data; + sensor->sensor_modes_nb = ARRAY_SIZE(vgx661_mode_data); + sensor->default_mode = &vgx661_mode_data[VGX661_DEFAULT_MODE]; + sensor->rot_term = VGX661_SHORT_ROT_TERM; + } else { + /* Should never happen */ + WARN_ON(true); + } + sensor->current_mode = sensor->default_mode; +} + +static int vgxy61_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct fwnode_handle *handle; + struct vgxy61_dev *sensor; + int ret; + + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + sensor->i2c_client = client; + sensor->streaming = false; + sensor->hdr = VGXY61_NO_HDR; + sensor->expo_long = 200; + sensor->expo_short = 0; + sensor->hflip = false; + sensor->vflip = false; + sensor->analog_gain = 0; + sensor->digital_gain = 256; + + handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, 0); + if (!handle) { + dev_err(dev, "handle node not found\n"); + return -EINVAL; + } + + ret = vgxy61_tx_from_ep(sensor, handle); + fwnode_handle_put(handle); + if (ret) { + dev_err(dev, "Failed to parse handle %d\n", ret); + return ret; + } + + sensor->xclk = devm_clk_get(dev, NULL); + if (IS_ERR(sensor->xclk)) { + dev_err(dev, "failed to get xclk\n"); + return PTR_ERR(sensor->xclk); + } + sensor->clk_freq = clk_get_rate(sensor->xclk); + if (sensor->clk_freq < 6 * HZ_PER_MHZ || + sensor->clk_freq > 27 * HZ_PER_MHZ) { + dev_err(dev, "Only 6Mhz-27Mhz clock range supported. provide %lu MHz\n", + sensor->clk_freq / HZ_PER_MHZ); + return -EINVAL; + } + sensor->gpios_polarity = + device_property_read_bool(dev, "st,strobe-gpios-polarity"); + + v4l2_i2c_subdev_init(&sensor->sd, client, &vgxy61_subdev_ops); + sensor->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + sensor->sd.entity.ops = &vgxy61_subdev_entity_ops; + sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + + sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + + ret = vgxy61_get_regulators(sensor); + if (ret) { + dev_err(&client->dev, "failed to get regulators %d\n", ret); + return ret; + } + + ret = regulator_bulk_enable(ARRAY_SIZE(vgxy61_supply_name), + sensor->supplies); + if (ret) { + dev_err(&client->dev, "failed to enable regulators %d\n", ret); + return ret; + } + + ret = vgxy61_power_on(dev); + if (ret) + return ret; + + ret = vgxy61_detect(sensor); + if (ret) { + dev_err(&client->dev, "sensor detect failed %d\n", ret); + return ret; + } + + vgxy61_fill_sensor_param(sensor); + vgxy61_fill_framefmt(sensor, sensor->current_mode, &sensor->fmt, + VGXY61_MEDIA_BUS_FMT_DEF); + + ret = vgxy61_update_hdr(sensor, sensor->hdr); + if (ret) + return ret; + + mutex_init(&sensor->lock); + + ret = vgxy61_init_controls(sensor); + if (ret) { + dev_err(&client->dev, "controls initialization failed %d\n", + ret); + goto error_power_off; + } + + ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad); + if (ret) { + dev_err(&client->dev, "pads init failed %d\n", ret); + goto error_handler_free; + } + + /* Enable runtime PM and turn off the device */ + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + pm_runtime_idle(dev); + + ret = v4l2_async_register_subdev(&sensor->sd); + if (ret) { + dev_err(&client->dev, "async subdev register failed %d\n", ret); + goto error_pm_runtime; + } + + pm_runtime_set_autosuspend_delay(&client->dev, 1000); + pm_runtime_use_autosuspend(&client->dev); + + dev_dbg(&client->dev, "vgxy61 probe successfully\n"); + + return 0; + +error_pm_runtime: + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + media_entity_cleanup(&sensor->sd.entity); +error_handler_free: + v4l2_ctrl_handler_free(sensor->sd.ctrl_handler); + mutex_destroy(&sensor->lock); +error_power_off: + vgxy61_power_off(dev); + + return ret; +} + +static int vgxy61_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct vgxy61_dev *sensor = to_vgxy61_dev(sd); + + v4l2_async_unregister_subdev(&sensor->sd); + mutex_destroy(&sensor->lock); + media_entity_cleanup(&sensor->sd.entity); + + pm_runtime_disable(&client->dev); + if (!pm_runtime_status_suspended(&client->dev)) + vgxy61_power_off(&client->dev); + pm_runtime_set_suspended(&client->dev); + + return 0; +} + +static const struct of_device_id vgxy61_dt_ids[] = { + { .compatible = "st,st-vgxy61" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, vgxy61_dt_ids); + +static const struct dev_pm_ops vgxy61_pm_ops = { + SET_RUNTIME_PM_OPS(vgxy61_power_off, vgxy61_power_on, NULL) +}; + +static struct i2c_driver vgxy61_i2c_driver = { + .driver = { + .name = "st-vgxy61", + .of_match_table = vgxy61_dt_ids, + .pm = &vgxy61_pm_ops, + }, + .probe_new = vgxy61_probe, + .remove = vgxy61_remove, +}; + +module_i2c_driver(vgxy61_i2c_driver); + +MODULE_AUTHOR("Benjamin Mugnier "); +MODULE_AUTHOR("Mickael Guene "); +MODULE_AUTHOR("Sylvain Petinot "); +MODULE_DESCRIPTION("VGXY61 camera subdev driver"); +MODULE_LICENSE("GPL");