From patchwork Wed Jul 6 19:41:24 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 588224 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id ADBCACCA47C for ; Wed, 6 Jul 2022 19:41:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S234207AbiGFTlr (ORCPT ); Wed, 6 Jul 2022 15:41:47 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35906 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234169AbiGFTlr (ORCPT ); Wed, 6 Jul 2022 15:41:47 -0400 Received: from mail-wr1-x42c.google.com (mail-wr1-x42c.google.com [IPv6:2a00:1450:4864:20::42c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4097F24F31 for ; Wed, 6 Jul 2022 12:41:42 -0700 (PDT) Received: by mail-wr1-x42c.google.com with SMTP id cl1so23464428wrb.4 for ; Wed, 06 Jul 2022 12:41:42 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:subject:date:message-id:in-reply-to:references:mime-version :content-transfer-encoding; bh=O7/vuV7caPqrL5+GIhTB313f79mMMqIDo9Z/UDNL3Tg=; b=Q8IeLj6xJCqLCZwwUUmFlHd1BrnPA70aZ+r4XQ4wMkQYxC4FN0G0Bf2pau5jlpPKJq 3LDfNkmyxSNH25rqLWQH/V2LQr2eexbx3gCgFPWNvpfx17Q3o/2XSpkuQ9kRofPy3zJ/ kaZ7WHgK9U+ZC8aLZl9Y24RsPEenHqOh7iq2aLgh0Cyc4n+On6Rc3Pg3241DQIdUhZDh DAY5Xvb+h0aMsAm2QWAPuyhPcygWW/kXJi284anu9ppzhyIkN0dUKgZEgb6Urv6QDCcL Fyw23yjCLdAL8eiF8G4kmOeuAUNV2kaQb63J2ZSn2dPS1X5yHSg64CMF07pYPbC/ICXE YN0A== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=O7/vuV7caPqrL5+GIhTB313f79mMMqIDo9Z/UDNL3Tg=; b=037Nhx+h8GOKIpOhJ6iM/kVsmUGrhf9QejAIWAD/xF3Dx3424LpYY2Moi2cbLlc6Nq vqY/psTzoydKz5d++9DNleqSrHtpt7ukvwXZsV6Z4t1OG305KrKYahBXIkcOkgCYto/E uXDotOsxTyk3ltySiuB1NjO8PKGSdbJTjA2O9n2LQx4gufqvXuLUOzZP2DBwq8emFZk3 MwB1VYXRb9E3VX3hIHjc1hMMdS8JpFN88YWk9nH2vDVQbCH8wPMgkdc2R0n1lSGz8KDR tcVMxwIsrhKJRzwRJQf4lJaOd6sFelY0x/TY79x4Lu+Ass6HLuxbg3BJjb73MVYdiJMS 1/6A== X-Gm-Message-State: AJIora9nXOTVV6VQiTUiX1u0se6sN9n6fril3EeLEHCU6CJVzbZZbA4K yNcUM339Rhlsr8imojFmHRmx8g== X-Google-Smtp-Source: AGRyM1s3Tjw68h3msX4HNhkrJHUgjg4QtmCCmwixQiMuQbF2bcxgHCNMYfhxssV6DUuk/3tBdKPCqQ== X-Received: by 2002:a05:6000:192:b0:21a:3c91:df05 with SMTP id p18-20020a056000019200b0021a3c91df05mr40779375wrx.655.1657136500330; Wed, 06 Jul 2022 12:41:40 -0700 (PDT) Received: from localhost.localdomain (88-107-17-60.dynamic.dsl.as9105.com. [88.107.17.60]) by smtp.gmail.com with ESMTPSA id f190-20020a1c38c7000000b0039c5328ad92sm23387320wma.41.2022.07.06.12.41.39 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 06 Jul 2022 12:41:39 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , Nathan Chancellor , Nick Desaulniers , Tom Rix , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, llvm@lists.linux.dev, phone-devel@vger.kernel.org Subject: [PATCH v4 1/2] power: supply: add Qualcomm PMI8998 SMB2 Charger driver Date: Wed, 6 Jul 2022 20:41:24 +0100 Message-Id: <20220706194125.1861256-2-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.1 In-Reply-To: <20220706194125.1861256-1-caleb.connolly@linaro.org> References: <20220706194125.1861256-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a driver for the SMB2 charger block found in the Qualcomm PMI8998 and PM660. Signed-off-by: Caleb Connolly Reported-by: kernel test robot --- Changes since v1: * Renamed from qcom_smb2 to qcom_pmi8998_charger --- drivers/power/supply/Kconfig | 9 + drivers/power/supply/Makefile | 1 + drivers/power/supply/qcom_pmi8998_charger.c | 1044 +++++++++++++++++++ 3 files changed, 1054 insertions(+) create mode 100644 drivers/power/supply/qcom_pmi8998_charger.c diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 1aa8323ad9f6..1fd9ad98b607 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -897,4 +897,13 @@ config BATTERY_UG3105 device is off or suspended, the functionality of this driver is limited to reporting capacity only. +config CHARGER_QCOM_SMB2 + tristate "Qualcomm PMI8998 PMIC charger driver" + depends on MFD_SPMI_PMIC + depends on IIO + help + Say Y here to enable the Qualcomm PMIC Charger driver. This + adds support for the SMB2 switch mode battery charger found + in PMI8998 and related PMICs. + endif # POWER_SUPPLY diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 7f02f36aea55..a39e3eda6dbd 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -108,3 +108,4 @@ obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o obj-$(CONFIG_BATTERY_UG3105) += ug3105_battery.o +obj-$(CONFIG_CHARGER_QCOM_SMB2) += qcom_pmi8998_charger.o diff --git a/drivers/power/supply/qcom_pmi8998_charger.c b/drivers/power/supply/qcom_pmi8998_charger.c new file mode 100644 index 000000000000..2ba8f83282e1 --- /dev/null +++ b/drivers/power/supply/qcom_pmi8998_charger.c @@ -0,0 +1,1044 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Linaro Ltd. + * Author: Caleb Connolly + * + * This driver is for the switch-mode battery charger and boost + * hardware found in pmi8998 and related PMICs. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +// clang-format off +#define BATTERY_CHARGER_STATUS_1 0x06 +#define BVR_INITIAL_RAMP_BIT BIT(7) +#define CC_SOFT_TERMINATE_BIT BIT(6) +#define STEP_CHARGING_STATUS_SHIFT 3 +#define STEP_CHARGING_STATUS_MASK GENMASK(5, 3) +#define BATTERY_CHARGER_STATUS_MASK GENMASK(2, 0) + +#define BATTERY_CHARGER_STATUS_2 0x07 +#define INPUT_CURRENT_LIMITED_BIT BIT(7) +#define CHARGER_ERROR_STATUS_SFT_EXPIRE_BIT BIT(6) +#define CHARGER_ERROR_STATUS_BAT_OV_BIT BIT(5) +#define CHARGER_ERROR_STATUS_BAT_TERM_MISSING_BIT BIT(4) +#define BAT_TEMP_STATUS_MASK GENMASK(3, 0) +#define BAT_TEMP_STATUS_SOFT_LIMIT_MASK GENMASK(3, 2) +#define BAT_TEMP_STATUS_HOT_SOFT_LIMIT_BIT BIT(3) +#define BAT_TEMP_STATUS_COLD_SOFT_LIMIT_BIT BIT(2) +#define BAT_TEMP_STATUS_TOO_HOT_BIT BIT(1) +#define BAT_TEMP_STATUS_TOO_COLD_BIT BIT(0) + +#define BATTERY_CHARGER_STATUS_4 0x0A +#define CHARGE_CURRENT_POST_JEITA_MASK GENMASK(7, 0) + +#define BATTERY_CHARGER_STATUS_7 0x0D +#define ENABLE_TRICKLE_BIT BIT(7) +#define ENABLE_PRE_CHARGING_BIT BIT(6) +#define ENABLE_FAST_CHARGING_BIT BIT(5) +#define ENABLE_FULLON_MODE_BIT BIT(4) +#define TOO_COLD_ADC_BIT BIT(3) +#define TOO_HOT_ADC_BIT BIT(2) +#define HOT_SL_ADC_BIT BIT(1) +#define COLD_SL_ADC_BIT BIT(0) + +#define CHARGING_ENABLE_CMD 0x42 +#define CHARGING_ENABLE_CMD_BIT BIT(0) + +#define CHGR_CFG2 0x51 +#define CHG_EN_SRC_BIT BIT(7) +#define CHG_EN_POLARITY_BIT BIT(6) +#define PRETOFAST_TRANSITION_CFG_BIT BIT(5) +#define BAT_OV_ECC_BIT BIT(4) +#define I_TERM_BIT BIT(3) +#define AUTO_RECHG_BIT BIT(2) +#define EN_ANALOG_DROP_IN_VBATT_BIT BIT(1) +#define CHARGER_INHIBIT_BIT BIT(0) + +#define PRE_CHARGE_CURRENT_CFG 0x60 +#define PRE_CHARGE_CURRENT_SETTING_MASK GENMASK(5, 0) + +#define FAST_CHARGE_CURRENT_CFG 0x61 +#define FAST_CHARGE_CURRENT_SETTING_MASK GENMASK(7, 0) + +#define FLOAT_VOLTAGE_CFG 0x70 +#define FLOAT_VOLTAGE_SETTING_MASK GENMASK(7, 0) + +#define FG_UPDATE_CFG_2_SEL 0x7D +#define SOC_LT_OTG_THRESH_SEL_BIT BIT(3) +#define SOC_LT_CHG_RECHARGE_THRESH_SEL_BIT BIT(2) +#define VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT BIT(1) +#define IBT_LT_CHG_TERM_THRESH_SEL_BIT BIT(0) + +#define JEITA_EN_CFG 0x90 +#define JEITA_EN_HARDLIMIT_BIT BIT(4) +#define JEITA_EN_HOT_SL_FCV_BIT BIT(3) +#define JEITA_EN_COLD_SL_FCV_BIT BIT(2) +#define JEITA_EN_HOT_SL_CCC_BIT BIT(1) +#define JEITA_EN_COLD_SL_CCC_BIT BIT(0) + +#define INT_RT_STS 0x310 +#define TYPE_C_CHANGE_RT_STS_BIT BIT(7) +#define USBIN_ICL_CHANGE_RT_STS_BIT BIT(6) +#define USBIN_SOURCE_CHANGE_RT_STS_BIT BIT(5) +#define USBIN_PLUGIN_RT_STS_BIT BIT(4) +#define USBIN_OV_RT_STS_BIT BIT(3) +#define USBIN_UV_RT_STS_BIT BIT(2) +#define USBIN_LT_3P6V_RT_STS_BIT BIT(1) +#define USBIN_COLLAPSE_RT_STS_BIT BIT(0) + +#define OTG_CFG 0x153 +#define OTG_RESERVED_MASK GENMASK(7, 6) +#define DIS_OTG_ON_TLIM_BIT BIT(5) +#define QUICKSTART_OTG_FASTROLESWAP_BIT BIT(4) +#define INCREASE_DFP_TIME_BIT BIT(3) +#define ENABLE_OTG_IN_DEBUG_MODE_BIT BIT(2) +#define OTG_EN_SRC_CFG_BIT BIT(1) +#define CONCURRENT_MODE_CFG_BIT BIT(0) + +#define OTG_ENG_OTG_CFG 0x1C0 +#define ENG_BUCKBOOST_HALT1_8_MODE_BIT BIT(0) + +#define APSD_STATUS 0x307 +#define APSD_STATUS_7_BIT BIT(7) +#define HVDCP_CHECK_TIMEOUT_BIT BIT(6) +#define SLOW_PLUGIN_TIMEOUT_BIT BIT(5) +#define ENUMERATION_DONE_BIT BIT(4) +#define VADP_CHANGE_DONE_AFTER_AUTH_BIT BIT(3) +#define QC_AUTH_DONE_STATUS_BIT BIT(2) +#define QC_CHARGER_BIT BIT(1) +#define APSD_DTC_STATUS_DONE_BIT BIT(0) + +#define APSD_RESULT_STATUS 0x308 +#define ICL_OVERRIDE_LATCH_BIT BIT(7) +#define APSD_RESULT_STATUS_MASK GENMASK(6, 0) +#define QC_3P0_BIT BIT(6) +#define QC_2P0_BIT BIT(5) +#define FLOAT_CHARGER_BIT BIT(4) +#define DCP_CHARGER_BIT BIT(3) +#define CDP_CHARGER_BIT BIT(2) +#define OCP_CHARGER_BIT BIT(1) +#define SDP_CHARGER_BIT BIT(0) + +#define TYPE_C_STATUS_1 0x30B +#define UFP_TYPEC_MASK GENMASK(7, 5) +#define UFP_TYPEC_RDSTD_BIT BIT(7) +#define UFP_TYPEC_RD1P5_BIT BIT(6) +#define UFP_TYPEC_RD3P0_BIT BIT(5) +#define UFP_TYPEC_FMB_255K_BIT BIT(4) +#define UFP_TYPEC_FMB_301K_BIT BIT(3) +#define UFP_TYPEC_FMB_523K_BIT BIT(2) +#define UFP_TYPEC_FMB_619K_BIT BIT(1) +#define UFP_TYPEC_OPEN_OPEN_BIT BIT(0) + +#define TYPE_C_STATUS_2 0x30C +#define DFP_RA_OPEN_BIT BIT(7) +#define TIMER_STAGE_BIT BIT(6) +#define EXIT_UFP_MODE_BIT BIT(5) +#define EXIT_DFP_MODE_BIT BIT(4) +#define DFP_TYPEC_MASK GENMASK(3, 0) +#define DFP_RD_OPEN_BIT BIT(3) +#define DFP_RD_RA_VCONN_BIT BIT(2) +#define DFP_RD_RD_BIT BIT(1) +#define DFP_RA_RA_BIT BIT(0) + +#define TYPE_C_STATUS_3 0x30D +#define ENABLE_BANDGAP_BIT BIT(7) +#define U_USB_GND_NOVBUS_BIT BIT(6) +#define U_USB_FLOAT_NOVBUS_BIT BIT(5) +#define U_USB_GND_BIT BIT(4) +#define U_USB_FMB1_BIT BIT(3) +#define U_USB_FLOAT1_BIT BIT(2) +#define U_USB_FMB2_BIT BIT(1) +#define U_USB_FLOAT2_BIT BIT(0) + +#define TYPE_C_STATUS_4 0x30E +#define UFP_DFP_MODE_STATUS_BIT BIT(7) +#define TYPEC_VBUS_STATUS_BIT BIT(6) +#define TYPEC_VBUS_ERROR_STATUS_BIT BIT(5) +#define TYPEC_DEBOUNCE_DONE_STATUS_BIT BIT(4) +#define TYPEC_UFP_AUDIO_ADAPT_STATUS_BIT BIT(3) +#define TYPEC_VCONN_OVERCURR_STATUS_BIT BIT(2) +#define CC_ORIENTATION_BIT BIT(1) +#define CC_ATTACHED_BIT BIT(0) + +#define TYPE_C_STATUS_5 0x30F +#define TRY_SOURCE_FAILED_BIT BIT(6) +#define TRY_SINK_FAILED_BIT BIT(5) +#define TIMER_STAGE_2_BIT BIT(4) +#define TYPEC_LEGACY_CABLE_STATUS_BIT BIT(3) +#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS_BIT BIT(2) +#define TYPEC_TRYSOURCE_DETECT_STATUS_BIT BIT(1) +#define TYPEC_TRYSINK_DETECT_STATUS_BIT BIT(0) + +#define CMD_APSD 0x341 +#define ICL_OVERRIDE_BIT BIT(1) +#define APSD_RERUN_BIT BIT(0) + +#define TYPE_C_CFG 0x358 +#define APSD_START_ON_CC_BIT BIT(7) +#define WAIT_FOR_APSD_BIT BIT(6) +#define FACTORY_MODE_DETECTION_EN_BIT BIT(5) +#define FACTORY_MODE_ICL_3A_4A_BIT BIT(4) +#define FACTORY_MODE_DIS_CHGING_CFG_BIT BIT(3) +#define SUSPEND_NON_COMPLIANT_CFG_BIT BIT(2) +#define VCONN_OC_CFG_BIT BIT(1) +#define TYPE_C_OR_U_USB_BIT BIT(0) + +#define TYPE_C_CFG_2 0x359 +#define TYPE_C_DFP_CURRSRC_MODE_BIT BIT(7) +#define DFP_CC_1P4V_OR_1P6V_BIT BIT(6) +#define VCONN_SOFTSTART_CFG_MASK GENMASK(5, 4) +#define EN_TRY_SOURCE_MODE_BIT BIT(3) +#define USB_FACTORY_MODE_ENABLE_BIT BIT(2) +#define TYPE_C_UFP_MODE_BIT BIT(1) +#define EN_80UA_180UA_CUR_SOURCE_BIT BIT(0) + +#define TYPE_C_CFG_3 0x35A +#define TVBUS_DEBOUNCE_BIT BIT(7) +#define TYPEC_LEGACY_CABLE_INT_EN_BIT BIT(6) +#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN_B BIT(5) +#define TYPEC_TRYSOURCE_DETECT_INT_EN_BIT BIT(4) +#define TYPEC_TRYSINK_DETECT_INT_EN_BIT BIT(3) +#define EN_TRYSINK_MODE_BIT BIT(2) +#define EN_LEGACY_CABLE_DETECTION_BIT BIT(1) +#define ALLOW_PD_DRING_UFP_TCCDB_BIT BIT(0) + +#define USBIN_OPTIONS_1_CFG 0x362 +#define CABLE_R_SEL_BIT BIT(7) +#define HVDCP_AUTH_ALG_EN_CFG_BIT BIT(6) +#define HVDCP_AUTONOMOUS_MODE_EN_CFG_BIT BIT(5) +#define INPUT_PRIORITY_BIT BIT(4) +#define AUTO_SRC_DETECT_BIT BIT(3) +#define HVDCP_EN_BIT BIT(2) +#define VADP_INCREMENT_VOLTAGE_LIMIT_BIT BIT(1) +#define VADP_TAPER_TIMER_EN_BIT BIT(0) + +#define USBIN_OPTIONS_2_CFG 0x363 +#define WIPWR_RST_EUD_CFG_BIT BIT(7) +#define SWITCHER_START_CFG_BIT BIT(6) +#define DCD_TIMEOUT_SEL_BIT BIT(5) +#define OCD_CURRENT_SEL_BIT BIT(4) +#define SLOW_PLUGIN_TIMER_EN_CFG_BIT BIT(3) +#define FLOAT_OPTIONS_MASK GENMASK(2, 0) +#define FLOAT_DIS_CHGING_CFG_BIT BIT(2) +#define SUSPEND_FLOAT_CFG_BIT BIT(1) +#define FORCE_FLOAT_SDP_CFG_BIT BIT(0) + +#define TAPER_TIMER_SEL_CFG 0x364 +#define TYPEC_SPARE_CFG_BIT BIT(7) +#define TYPEC_DRP_DFP_TIME_CFG_BIT BIT(5) +#define TAPER_TIMER_SEL_MASK GENMASK(1, 0) + +#define USBIN_LOAD_CFG 0x365 +#define USBIN_OV_CH_LOAD_OPTION_BIT BIT(7) +#define ICL_OVERRIDE_AFTER_APSD_BIT BIT(4) + +#define USBIN_ICL_OPTIONS 0x366 +#define CFG_USB3P0_SEL_BIT BIT(2) +#define USB51_MODE_BIT BIT(1) +#define USBIN_MODE_CHG_BIT BIT(0) + +#define TYPE_C_INTRPT_ENB_SOFTWARE_CTRL 0x368 +#define EXIT_SNK_BASED_ON_CC_BIT BIT(7) +#define VCONN_EN_ORIENTATION_BIT BIT(6) +#define TYPEC_VCONN_OVERCURR_INT_EN_BIT BIT(5) +#define VCONN_EN_SRC_BIT BIT(4) +#define VCONN_EN_VALUE_BIT BIT(3) +#define TYPEC_POWER_ROLE_CMD_MASK GENMASK(2, 0) +#define UFP_EN_CMD_BIT BIT(2) +#define DFP_EN_CMD_BIT BIT(1) +#define TYPEC_DISABLE_CMD_BIT BIT(0) + +#define USBIN_CURRENT_LIMIT_CFG 0x370 +#define USBIN_CURRENT_LIMIT_MASK GENMASK(7, 0) + +#define USBIN_AICL_OPTIONS_CFG 0x380 +#define SUSPEND_ON_COLLAPSE_USBIN_BIT BIT(7) +#define USBIN_AICL_HDC_EN_BIT BIT(6) +#define USBIN_AICL_START_AT_MAX_BIT BIT(5) +#define USBIN_AICL_RERUN_EN_BIT BIT(4) +#define USBIN_AICL_ADC_EN_BIT BIT(3) +#define USBIN_AICL_EN_BIT BIT(2) +#define USBIN_HV_COLLAPSE_RESPONSE_BIT BIT(1) +#define USBIN_LV_COLLAPSE_RESPONSE_BIT BIT(0) + +#define USBIN_5V_AICL_THRESHOLD_CFG 0x381 +#define USBIN_5V_AICL_THRESHOLD_CFG_MASK GENMASK(2, 0) + +#define USBIN_CONT_AICL_THRESHOLD_CFG 0x384 +#define USBIN_CONT_AICL_THRESHOLD_CFG_MASK GENMASK(5, 0) + +#define DC_ENG_SSUPPLY_CFG2 0x4C1 +#define ENG_SSUPPLY_IVREF_OTG_SS_MASK GENMASK(2, 0) +#define OTG_SS_SLOW 0x3 + +#define DCIN_AICL_REF_SEL_CFG 0x481 +#define DCIN_CONT_AICL_THRESHOLD_CFG_MASK GENMASK(5, 0) + +#define WI_PWR_OPTIONS 0x495 +#define CHG_OK_BIT BIT(7) +#define WIPWR_UVLO_IRQ_OPT_BIT BIT(6) +#define BUCK_HOLDOFF_ENABLE_BIT BIT(5) +#define CHG_OK_HW_SW_SELECT_BIT BIT(4) +#define WIPWR_RST_ENABLE_BIT BIT(3) +#define DCIN_WIPWR_IRQ_SELECT_BIT BIT(2) +#define AICL_SWITCH_ENABLE_BIT BIT(1) +#define ZIN_ICL_ENABLE_BIT BIT(0) + +#define ICL_STATUS 0x607 +#define INPUT_CURRENT_LIMIT_MASK GENMASK(7, 0) + +#define POWER_PATH_STATUS 0x60B +#define P_PATH_INPUT_SS_DONE_BIT BIT(7) +#define P_PATH_USBIN_SUSPEND_STS_BIT BIT(6) +#define P_PATH_DCIN_SUSPEND_STS_BIT BIT(5) +#define P_PATH_USE_USBIN_BIT BIT(4) +#define P_PATH_USE_DCIN_BIT BIT(3) +#define P_PATH_POWER_PATH_MASK GENMASK(2, 1) +#define P_PATH_VALID_INPUT_POWER_SOURCE_STS_BIT BIT(0) + +#define BARK_BITE_WDOG_PET 0x643 +#define BARK_BITE_WDOG_PET_BIT BIT(0) + +#define WD_CFG 0x651 +#define WATCHDOG_TRIGGER_AFP_EN_BIT BIT(7) +#define BARK_WDOG_INT_EN_BIT BIT(6) +#define BITE_WDOG_INT_EN_BIT BIT(5) +#define SFT_AFTER_WDOG_IRQ_MASK GENMASK(4, 3) +#define WDOG_IRQ_SFT_BIT BIT(2) +#define WDOG_TIMER_EN_ON_PLUGIN_BIT BIT(1) +#define WDOG_TIMER_EN_BIT BIT(0) + +#define SNARL_BARK_BITE_WD_CFG 0x653 +#define BITE_WDOG_DISABLE_CHARGING_CFG_BIT BIT(7) +#define SNARL_WDOG_TIMEOUT_MASK GENMASK(6, 4) +#define BARK_WDOG_TIMEOUT_MASK GENMASK(3, 2) +#define BITE_WDOG_TIMEOUT_MASK GENMASK(1, 0) + +#define AICL_RERUN_TIME_CFG 0x661 +#define AICL_RERUN_TIME_MASK GENMASK(1, 0) + +#define STAT_CFG 0x690 +#define STAT_SW_OVERRIDE_VALUE_BIT BIT(7) +#define STAT_SW_OVERRIDE_CFG_BIT BIT(6) +#define STAT_PARALLEL_OFF_DG_CFG_MASK GENMASK(5, 4) +#define STAT_POLARITY_CFG_BIT BIT(3) +#define STAT_PARALLEL_CFG_BIT BIT(2) +#define STAT_FUNCTION_CFG_BIT BIT(1) +#define STAT_IRQ_PULSING_EN_BIT BIT(0) + +#define USBIN_CURRENT_25MA 25000 +#define USBIN_CURRENT_100MA 100000 +#define USBIN_CURRENT_150MA 150000 +#define USBIN_CURRENT_500MA 500000 +#define USBIN_CURRENT_900MA 900000 +#define SDP_CURRENT_UA 500000 +#define CDP_CURRENT_UA 1500000 +#define DCP_CURRENT_UA 1500000 +#define CURRENT_MAX_UA DCP_CURRENT_UA +// clang-format on + +enum charger_status { + TRICKLE_CHARGE = 0, + PRE_CHARGE, + FAST_CHARGE, + FULLON_CHARGE, + TAPER_CHARGE, + TERMINATE_CHARGE, + INHIBIT_CHARGE, + DISABLE_CHARGE, +}; + +struct smb2_register { + u16 addr; + u8 mask; + u8 val; +}; + +/** + * struct smb2_chip - smb2 chip structure + * @dev: Device reference for power_supply + * @name: The platform device name + * @base: Base address for smb2 registers + * @regmap: Register map + * @batt_info: Battery data from DT + * @status_change_work: Worker to handle plug/unplug events + * @usb_in_i_chan: USB_IN current measurement channel + * @usb_in_v_chan: USB_IN voltage measurement channel + * @chg_psy: Charger power supply instance + * @default_curr_limit: The default current limit from the APSD, used + * for CHARGE_CONTROL_LIMIT_MAX + */ +struct smb2_chip { + struct device *dev; + const char *name; + unsigned int base; + struct regmap *regmap; + struct power_supply_battery_info *batt_info; + + struct delayed_work status_change_work; + + struct iio_channel *usb_in_i_chan; + struct iio_channel *usb_in_v_chan; + + struct power_supply *chg_psy; + long default_curr_limit; +}; + +static enum power_supply_property smb2_properties[] = { + POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_USB_TYPE, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, + POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, +}; + +static enum power_supply_usb_type smb2_usb_types[] = { + POWER_SUPPLY_USB_TYPE_UNKNOWN, + POWER_SUPPLY_USB_TYPE_SDP, + POWER_SUPPLY_USB_TYPE_DCP, + POWER_SUPPLY_USB_TYPE_CDP, +}; + +int smb2_get_prop_usb_online(struct smb2_chip *chip, int *val) +{ + unsigned int stat; + int rc; + + rc = regmap_read(chip->regmap, chip->base + POWER_PATH_STATUS, &stat); + if (rc < 0) { + dev_err(chip->dev, "Couldn't read POWER_PATH_STATUS! ret=%d\n", + rc); + return rc; + } + + *val = (stat & P_PATH_USE_USBIN_BIT) && + (stat & P_PATH_VALID_INPUT_POWER_SOURCE_STS_BIT); + return 0; +} + +/* + * Qualcomm "automatic power source detection" aka APSD + * tells us what type of charger we're connected to. + */ +static int smb2_apsd_get_charger_type(struct smb2_chip *chip, int *val) +{ + int rc; + unsigned int apsd_stat, stat; + int usb_online; + + rc = smb2_get_prop_usb_online(chip, &usb_online); + if (rc < 0 || !usb_online) { + *val = POWER_SUPPLY_USB_TYPE_UNKNOWN; + return 0; + } + + rc = regmap_read(chip->regmap, chip->base + APSD_STATUS, &apsd_stat); + if (rc < 0) { + dev_err(chip->dev, "Failed to read apsd status, rc = %d", rc); + return rc; + } + if (!(apsd_stat & APSD_DTC_STATUS_DONE_BIT)) { + dev_err(chip->dev, "Apsd not ready"); + return -EAGAIN; + } + + rc = regmap_read(chip->regmap, chip->base + APSD_RESULT_STATUS, &stat); + if (rc < 0) { + dev_err(chip->dev, "Failed to read apsd result, rc = %d", rc); + return rc; + } + + stat &= APSD_RESULT_STATUS_MASK; + + if (stat & CDP_CHARGER_BIT) + *val = POWER_SUPPLY_USB_TYPE_CDP; + else if (stat & (DCP_CHARGER_BIT | OCP_CHARGER_BIT | FLOAT_CHARGER_BIT)) + *val = POWER_SUPPLY_USB_TYPE_DCP; + else /* SDP_CHARGER_BIT (or others) */ + *val = POWER_SUPPLY_USB_TYPE_SDP; + + return 0; +} + +int smb2_get_prop_status(struct smb2_chip *chip, int *val) +{ + int usb_online_val; + unsigned char stat[2]; + int rc; + + rc = smb2_get_prop_usb_online(chip, &usb_online_val); + if (rc < 0) { + dev_err(chip->dev, "Couldn't get usb online property rc = %d\n", + rc); + return rc; + } + + if (!usb_online_val) { + *val = POWER_SUPPLY_STATUS_DISCHARGING; + return rc; + } + + rc = regmap_bulk_read(chip->regmap, + chip->base + BATTERY_CHARGER_STATUS_1, &stat, 2); + if (rc < 0) { + dev_err(chip->dev, "Failed to read charging status ret=%d\n", + rc); + return rc; + } + + if (stat[1] & CHARGER_ERROR_STATUS_BAT_OV_BIT) { + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + return 0; + } + + stat[0] = stat[0] & BATTERY_CHARGER_STATUS_MASK; + + switch (stat[0]) { + case TRICKLE_CHARGE: + case PRE_CHARGE: + case FAST_CHARGE: + case FULLON_CHARGE: + case TAPER_CHARGE: + *val = POWER_SUPPLY_STATUS_CHARGING; + return rc; + case DISABLE_CHARGE: + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + return rc; + case TERMINATE_CHARGE: + *val = POWER_SUPPLY_STATUS_FULL; + return rc; + case INHIBIT_CHARGE: + default: + *val = POWER_SUPPLY_STATUS_UNKNOWN; + return rc; + } +} + +static inline int smb2_get_current_limit(struct smb2_chip *chip, + unsigned int *val) +{ + int rc = regmap_read(chip->regmap, chip->base + ICL_STATUS, val); + + if (rc >= 0) + *val *= 25000; + return rc; +} + +static int smb2_set_current_limit(struct smb2_chip *chip, unsigned int val) +{ + unsigned char val_raw; + + if (val > 4800000) { + dev_err(chip->dev, + "Can't set current limit higher than 4800000uA"); + return -EINVAL; + } + val_raw = val / 25000; + + return regmap_write(chip->regmap, chip->base + USBIN_CURRENT_LIMIT_CFG, + val_raw); +} + +void smb2_status_change_work(struct work_struct *work) +{ + struct smb2_chip *chip = + container_of(work, struct smb2_chip, status_change_work.work); + unsigned int charger_type, current_ua; + int usb_online, count, rc; + + smb2_get_prop_usb_online(chip, &usb_online); + if (usb_online == 0) { + chip->default_curr_limit = 0; + return; + } + + for (count = 0; count < 3; count++) { + dev_dbg(chip->dev, "get charger type retry %d\n", count); + rc = smb2_apsd_get_charger_type(chip, &charger_type); + if (rc == 0) + break; + msleep(100); + } + + if (rc < 0) { + rc = regmap_update_bits(chip->regmap, chip->base + CMD_APSD, + APSD_RERUN_BIT, APSD_RERUN_BIT); + schedule_delayed_work(&chip->status_change_work, + msecs_to_jiffies(1500)); + dev_dbg(chip->dev, "get charger type failed, rerun apsd\n"); + return; + } + + switch (charger_type) { + case POWER_SUPPLY_USB_TYPE_CDP: + current_ua = CDP_CURRENT_UA; + break; + case POWER_SUPPLY_USB_TYPE_DCP: + current_ua = DCP_CURRENT_UA; + break; + case POWER_SUPPLY_USB_TYPE_SDP: + default: + current_ua = SDP_CURRENT_UA; + break; + } + + chip->default_curr_limit = current_ua; + + smb2_set_current_limit(chip, current_ua); + power_supply_changed(chip->chg_psy); +} + +int smb2_get_iio_chan(struct smb2_chip *chip, struct iio_channel *chan, + int *val) +{ + int rc; + union power_supply_propval status; + + rc = power_supply_get_property(chip->chg_psy, POWER_SUPPLY_PROP_STATUS, + &status); + if (rc < 0 || status.intval != POWER_SUPPLY_STATUS_CHARGING) { + *val = 0; + return 0; + } + + if (IS_ERR(chan)) { + dev_err(chip->dev, "Failed to chan, err = %li", PTR_ERR(chan)); + return PTR_ERR(chan); + } + + return iio_read_channel_processed(chan, val); +} + +int smb2_get_prop_health(struct smb2_chip *chip, int *val) +{ + int rc; + unsigned int stat; + + rc = regmap_read(chip->regmap, chip->base + BATTERY_CHARGER_STATUS_2, + &stat); + if (rc < 0) { + dev_err(chip->dev, "Couldn't read charger status rc=%d\n", rc); + return rc; + } + + switch (stat) { + case CHARGER_ERROR_STATUS_BAT_OV_BIT: + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + return 0; + case BAT_TEMP_STATUS_TOO_COLD_BIT: + *val = POWER_SUPPLY_HEALTH_COLD; + return 0; + case BAT_TEMP_STATUS_TOO_HOT_BIT: + *val = POWER_SUPPLY_HEALTH_OVERHEAT; + return 0; + case BAT_TEMP_STATUS_COLD_SOFT_LIMIT_BIT: + *val = POWER_SUPPLY_HEALTH_COOL; + return 0; + case BAT_TEMP_STATUS_HOT_SOFT_LIMIT_BIT: + *val = POWER_SUPPLY_HEALTH_WARM; + return 0; + default: + *val = POWER_SUPPLY_HEALTH_GOOD; + return 0; + } +} + +static int smb2_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct smb2_chip *chip = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = "Qualcomm"; + return 0; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = chip->name; + return 0; + case POWER_SUPPLY_PROP_CURRENT_MAX: + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: + return smb2_get_current_limit(chip, &val->intval); + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX: + val->intval = chip->default_curr_limit; + return 0; + case POWER_SUPPLY_PROP_CURRENT_NOW: + return smb2_get_iio_chan(chip, chip->usb_in_i_chan, + &val->intval); + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + return smb2_get_iio_chan(chip, chip->usb_in_v_chan, + &val->intval); + case POWER_SUPPLY_PROP_ONLINE: + return smb2_get_prop_usb_online(chip, &val->intval); + case POWER_SUPPLY_PROP_STATUS: + return smb2_get_prop_status(chip, &val->intval); + case POWER_SUPPLY_PROP_HEALTH: + return smb2_get_prop_health(chip, &val->intval); + case POWER_SUPPLY_PROP_USB_TYPE: + return smb2_apsd_get_charger_type(chip, &val->intval); + default: + dev_err(chip->dev, "invalid property: %d\n", psp); + return -EINVAL; + } +} + +static int smb2_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct smb2_chip *chip = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_CURRENT_MAX: + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: + return smb2_set_current_limit(chip, val->intval); + default: + dev_err(chip->dev, "No setter for property: %d\n", psp); + return -EINVAL; + } +} + +static int smb2_property_is_writable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_CURRENT_MAX: + case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT: + return 1; + default: + return 0; + } +} + +irqreturn_t smb2_handle_batt_overvoltage(int irq, void *data) +{ + struct smb2_chip *chip = data; + unsigned int status; + + regmap_read(chip->regmap, chip->base + BATTERY_CHARGER_STATUS_2, + &status); + + if (status & CHARGER_ERROR_STATUS_BAT_OV_BIT) { + /* The hardware stops charging automatically */ + dev_err(chip->dev, + "battery overvoltage detected, charging stopped\n"); + power_supply_changed(chip->chg_psy); + } + + return IRQ_HANDLED; +} + +irqreturn_t smb2_handle_usb_plugin(int irq, void *data) +{ + struct smb2_chip *chip = data; + + power_supply_changed(chip->chg_psy); + + schedule_delayed_work(&chip->status_change_work, + msecs_to_jiffies(1000)); + + return IRQ_HANDLED; +} + +irqreturn_t smb2_handle_usb_icl_change(int irq, void *data) +{ + struct smb2_chip *chip = data; + + power_supply_changed(chip->chg_psy); + + return IRQ_HANDLED; +} + +irqreturn_t smb2_handle_wdog_bark(int irq, void *data) +{ + struct smb2_chip *chip = data; + int rc; + + power_supply_changed(chip->chg_psy); + + rc = regmap_write(chip->regmap, BARK_BITE_WDOG_PET, + BARK_BITE_WDOG_PET_BIT); + if (rc < 0) + dev_err(chip->dev, "Couldn't pet the dog rc=%d\n", rc); + + return IRQ_HANDLED; +} + +static const struct power_supply_desc smb2_psy_desc = { + .name = "pmi8998_charger", + .type = POWER_SUPPLY_TYPE_USB, + .usb_types = smb2_usb_types, + .num_usb_types = ARRAY_SIZE(smb2_usb_types), + .properties = smb2_properties, + .num_properties = ARRAY_SIZE(smb2_properties), + .get_property = smb2_get_property, + .set_property = smb2_set_property, + .property_is_writeable = smb2_property_is_writable, +}; + +/* Init sequence derived from vendor downstream driver */ +static const struct smb2_register smb2_init_seq[] = { + { .addr = AICL_RERUN_TIME_CFG, .mask = AICL_RERUN_TIME_MASK, .val = 0 }, + /* + * By default configure us as an upstream facing port + * FIXME: for OTG we should set UFP_EN_CMD_BIT and DFP_EN_CMD_BIT both to 0 + */ + { .addr = TYPE_C_INTRPT_ENB_SOFTWARE_CTRL, + .mask = TYPEC_POWER_ROLE_CMD_MASK | VCONN_EN_SRC_BIT | + VCONN_EN_VALUE_BIT, + .val = VCONN_EN_SRC_BIT | UFP_EN_CMD_BIT }, + /* + * disable Type-C factory mode and stay in Attached.SRC state when VCONN + * over-current happens + */ + { .addr = TYPE_C_CFG, + .mask = FACTORY_MODE_DETECTION_EN_BIT | VCONN_OC_CFG_BIT, + .val = 0 }, + /* Configure VBUS for software control */ + { .addr = OTG_CFG, .mask = OTG_EN_SRC_CFG_BIT, .val = 0 }, + { .addr = FG_UPDATE_CFG_2_SEL, + .mask = SOC_LT_CHG_RECHARGE_THRESH_SEL_BIT | + VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT, + .val = VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT }, + /* Enable charging */ + { .addr = USBIN_OPTIONS_1_CFG, .mask = HVDCP_EN_BIT, .val = 0 }, + { .addr = CHARGING_ENABLE_CMD, + .mask = CHARGING_ENABLE_CMD_BIT, + .val = CHARGING_ENABLE_CMD_BIT }, + /* Allow overriding the current limit */ + // { .addr = USBIN_LOAD_CFG, + // .mask = ICL_OVERRIDE_AFTER_APSD_BIT, + // .val = ICL_OVERRIDE_AFTER_APSD_BIT }, + { .addr = CHGR_CFG2, + .mask = CHG_EN_SRC_BIT | CHG_EN_POLARITY_BIT | + PRETOFAST_TRANSITION_CFG_BIT | BAT_OV_ECC_BIT | I_TERM_BIT | + AUTO_RECHG_BIT | EN_ANALOG_DROP_IN_VBATT_BIT | + CHARGER_INHIBIT_BIT, + .val = 0 }, + /* + * No clue what this does + */ + { .addr = STAT_CFG, + .mask = STAT_SW_OVERRIDE_CFG_BIT, + .val = STAT_SW_OVERRIDE_CFG_BIT }, + /* + * Set the default SDP charger type to a 500ma USB 2.0 port + */ + { .addr = USBIN_ICL_OPTIONS, + .mask = USB51_MODE_BIT | USBIN_MODE_CHG_BIT, + .val = USB51_MODE_BIT }, + /* + * Disable watchdog + */ + { .addr = SNARL_BARK_BITE_WD_CFG, .mask = 0xff, .val = 0 }, + { .addr = WD_CFG, + .mask = WATCHDOG_TRIGGER_AFP_EN_BIT | WDOG_TIMER_EN_ON_PLUGIN_BIT | + BARK_WDOG_INT_EN_BIT, + .val = 0 }, + /* OnePlus init stuff from "op_set_collapse_fet" */ + { .addr = USBIN_5V_AICL_THRESHOLD_CFG, + .mask = USBIN_5V_AICL_THRESHOLD_CFG_MASK, + .val = 0x3 }, + { .addr = USBIN_CONT_AICL_THRESHOLD_CFG, + .mask = USBIN_CONT_AICL_THRESHOLD_CFG_MASK, + .val = 0x3 }, + /* Yay undocumented register values! */ + { .addr = USBIN_LOAD_CFG, .mask = BIT(0) | BIT(1), .val = 0x3 }, + /* Enable Automatic Input Current Limit, this will slowly ramp up the current + * When connected to a wall charger, and automatically stop when it detects + * the charger current limit (voltage drop?) or it reaches the programmed limit. + */ + { .addr = USBIN_AICL_OPTIONS_CFG, + .mask = USBIN_AICL_START_AT_MAX_BIT | USBIN_AICL_ADC_EN_BIT | + USBIN_AICL_EN_BIT | SUSPEND_ON_COLLAPSE_USBIN_BIT | + USBIN_HV_COLLAPSE_RESPONSE_BIT | + USBIN_LV_COLLAPSE_RESPONSE_BIT, + .val = USBIN_HV_COLLAPSE_RESPONSE_BIT | + USBIN_LV_COLLAPSE_RESPONSE_BIT | USBIN_AICL_EN_BIT }, + /* + * Set pre charge current to default, the OnePlus 6 bootloader + * sets this very conservatively. + * NOTE: seems to be reset to zero again anyway after boot + */ + { .addr = PRE_CHARGE_CURRENT_CFG, + .mask = PRE_CHARGE_CURRENT_SETTING_MASK, + .val = 500000 / 25000 }, + /* + * Set "fast charge current" to the default 2A, the OnePlus 6 also + * sets this very conservatively. + * NOTE: seems to be reset to zero again anyway after boot + */ + { .addr = FAST_CHARGE_CURRENT_CFG, + .mask = FAST_CHARGE_CURRENT_SETTING_MASK, + .addr = 1950000 / 25000 }, +}; + +static int smb2_init_hw(struct smb2_chip *chip) +{ + int rc, i; + + for (i = 0; i < ARRAY_SIZE(smb2_init_seq); i++) { + dev_dbg(chip->dev, "%d: Writing 0x%02x to 0x%02x\n", i, + smb2_init_seq[i].val, smb2_init_seq[i].addr); + rc = regmap_update_bits(chip->regmap, + chip->base + smb2_init_seq[i].addr, + smb2_init_seq[i].mask, + smb2_init_seq[i].val); + if (rc < 0) + return dev_err_probe( + chip->dev, rc, + "%s: Failed to write 0x%02x to 0x%02x\n", + __func__, smb2_init_seq[i].val, + smb2_init_seq[i].addr); + } + + return 0; +} + +struct smb2_irqs { + const char *name; + irqreturn_t (*handler)(int irq, void *data); +}; + +static const struct smb2_irqs irqs[] = { + { .name = "bat-ov", .handler = smb2_handle_batt_overvoltage }, + { .name = "usb-plugin", .handler = smb2_handle_usb_plugin }, + { .name = "usbin-icl-change", .handler = smb2_handle_usb_icl_change }, + { .name = "wdog-bark", .handler = smb2_handle_wdog_bark }, +}; + +static int smb2_probe(struct platform_device *pdev) +{ + struct power_supply_config supply_config = {}; + struct smb2_chip *chip; + int rc, i, irq; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &pdev->dev; + chip->name = pdev->name; + + chip->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->regmap) { + return dev_err_probe(chip->dev, -ENODEV, + "failed to locate the regmap\n"); + } + + rc = device_property_read_u32(chip->dev, "reg", &chip->base); + if (rc < 0) { + return dev_err_probe(chip->dev, rc, + "Couldn't read base address\n"); + } + + chip->usb_in_v_chan = devm_iio_channel_get(chip->dev, "usbin_v"); + if (IS_ERR(chip->usb_in_v_chan)) + return dev_err_probe( + chip->dev, PTR_ERR(chip->usb_in_v_chan), + "Couldn't get usbin_v IIO channel from RRADC\n"); + + chip->usb_in_i_chan = devm_iio_channel_get(chip->dev, "usbin_i"); + if (IS_ERR(chip->usb_in_i_chan)) { + return dev_err_probe( + chip->dev, PTR_ERR(chip->usb_in_i_chan), + "Couldn't get usbin_i IIO channel from RRADC\n"); + } + + rc = smb2_init_hw(chip); + if (rc < 0) + return rc; + + supply_config.drv_data = chip; + supply_config.of_node = pdev->dev.of_node; + + chip->chg_psy = devm_power_supply_register(chip->dev, &smb2_psy_desc, + &supply_config); + if (IS_ERR(chip->chg_psy)) + return dev_err_probe(chip->dev, PTR_ERR(chip->chg_psy), + "failed to register power supply\n"); + + rc = power_supply_get_battery_info(chip->chg_psy, &chip->batt_info); + if (rc) + return dev_err_probe(chip->dev, rc, + "Failed to get battery info\n"); + + rc = devm_delayed_work_autocancel(chip->dev, &chip->status_change_work, + smb2_status_change_work); + if (rc) + return dev_err_probe( + chip->dev, rc, + "Failed to initialise status change work\n"); + + rc = (chip->batt_info->voltage_max_design_uv - 3487500) / 7500 + 1; + rc = regmap_update_bits(chip->regmap, chip->base + FLOAT_VOLTAGE_CFG, + FLOAT_VOLTAGE_SETTING_MASK, rc); + if (rc < 0) + return dev_err_probe(chip->dev, rc, "Couldn't set vbat max\n"); + + for (i = 0; i < ARRAY_SIZE(irqs); i++) { + irq = of_irq_get_byname(pdev->dev.of_node, irqs[i].name); + if (irq < 0) + return dev_err_probe(chip->dev, irq, + "Couldn't get irq %s byname\n", + irqs[i].name); + rc = devm_request_threaded_irq(chip->dev, irq, NULL, + irqs[i].handler, IRQF_ONESHOT, + irqs[i].name, chip); + if (rc < 0) + return dev_err_probe(chip->dev, irq, + "Couldn't request irq %s\n", + irqs[i].name); + } + + platform_set_drvdata(pdev, chip); + + /* Initialise charger state */ + schedule_delayed_work(&chip->status_change_work, 0); + + return 0; +} + +static const struct of_device_id smb2_match_id_table[] = { + { .compatible = "qcom,pmi8998-charger" }, + { .compatible = "qcom,pm660-charger" }, + { /* sentinal */ } +}; +MODULE_DEVICE_TABLE(of, smb2_match_id_table); + +static struct platform_driver qcom_spmi_smb2 = { + .probe = smb2_probe, + .driver = { + .name = "qcom-pmi8998-charger", + .of_match_table = smb2_match_id_table, + }, +}; + +module_platform_driver(qcom_spmi_smb2); + +MODULE_AUTHOR("Caleb Connolly "); +MODULE_DESCRIPTION("Qualcomm SMB2 Charger Driver"); +MODULE_LICENSE("GPL"); From patchwork Wed Jul 6 19:41:25 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 587775 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DF45CCCA481 for ; Wed, 6 Jul 2022 19:41:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S233916AbiGFTlv (ORCPT ); Wed, 6 Jul 2022 15:41:51 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:35942 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234220AbiGFTlr (ORCPT ); Wed, 6 Jul 2022 15:41:47 -0400 Received: from mail-wm1-x32d.google.com (mail-wm1-x32d.google.com [IPv6:2a00:1450:4864:20::32d]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4E59F25EB5 for ; Wed, 6 Jul 2022 12:41:43 -0700 (PDT) Received: by mail-wm1-x32d.google.com with SMTP id v67-20020a1cac46000000b003a1888b9d36so9753377wme.0 for ; Wed, 06 Jul 2022 12:41:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=tGS8MF/Xhbljo/V0X6FBR6Q+x7h80TWkximSoLlEBGs=; b=bNBEpmvX2QfzrR6lILsXG6WHpLniE3Y+yH24C5dTXtslVhyxCu926tN5/DRb8rPaGW Gzq58ib+Bqjegyt4Jg69dEzdSx0tofEdELldaitVi8RLhUWV4hd0MyjsSsX7SgVqQkjm wsm6DyX8kBL0NEXR9roGh4FgWC4AucXmQnSaE0eep0TX2AV8nRsi8kt+Krc/jW0j/lQ7 H2/+7vcuOYmByBv55vH048IeakzS4eQiTfy0fXNYJ2bmaEl6gRJZ+YsJLqgOs4pnoCNb Y71hA2m6JcYvenutz9ujtvSmqEhfg0JyhrouBg2Oaqaat/OlzGNKrsnzt+AIvHzZp9pF BUyw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=tGS8MF/Xhbljo/V0X6FBR6Q+x7h80TWkximSoLlEBGs=; b=E8CnhGI+oL/tssfp+1na/Qsk99KSGjGku9Bb2zBkxxDScsLRjMPthYL7jh51U8GRrD gr4Z1ig1lvdgi/oYqp21SF5XP9syz3dJqsMeqU7QzYajaiWKrSZ5z+1sDl2czXkTWy+J PisVd4+MtkJpXtU/9q47m3xRd1clc46Wk7jqt52+PmV6hQXDO4GDU5GqR6Pb90nhWw2o ES132sIlgR0opAY8jhRN/P5u+vEgnAacnyl6a76XB/EY4hWboAXPqWvE2IbS5wDi+qAQ UUWuyA4vakmqC9RB7q+8oNKuCoS10KgbxZNgibbOrJwS3FpVtaXYllqvyc6QZOOiYn/W xr0A== X-Gm-Message-State: AJIora+zmWTGMFhIoK7q16m1BhMmoIxFo4K4XC1fxIP4tHRT7VgJ4/Rz pfwelslenowsA9OXD9aE96Ez5w== X-Google-Smtp-Source: AGRyM1sNxd/8XhYC3F5aYfNgv+Nhpu3gpUZPoFmwCOrA8M7/vH3awkPM/0tATAQwTG+RQ1UYvfGdlA== X-Received: by 2002:a1c:44c3:0:b0:3a0:5f25:498f with SMTP id r186-20020a1c44c3000000b003a05f25498fmr248976wma.124.1657136501688; Wed, 06 Jul 2022 12:41:41 -0700 (PDT) Received: from localhost.localdomain (88-107-17-60.dynamic.dsl.as9105.com. [88.107.17.60]) by smtp.gmail.com with ESMTPSA id f190-20020a1c38c7000000b0039c5328ad92sm23387320wma.41.2022.07.06.12.41.40 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 06 Jul 2022 12:41:40 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , Nathan Chancellor , Nick Desaulniers , Tom Rix , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, llvm@lists.linux.dev, phone-devel@vger.kernel.org Cc: Krzysztof Kozlowski Subject: [PATCH v4 2/2] dt-bindings: power: supply: qcom, pmi8998-charger: add bindings for smb2 driver Date: Wed, 6 Jul 2022 20:41:25 +0100 Message-Id: <20220706194125.1861256-3-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.1 In-Reply-To: <20220706194125.1861256-1-caleb.connolly@linaro.org> References: <20220706194125.1861256-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add devicetree bindings for the Qualcomm PMI8998/PM660 SMB2 charger driver. Signed-off-by: Caleb Connolly Reviewed-by: Krzysztof Kozlowski --- .../power/supply/qcom,pmi8998-charger.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml new file mode 100644 index 000000000000..277c47e048b6 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2" + +maintainers: + - Caleb Connolly + +properties: + compatible: + enum: + - qcom,pmi8998-charger + - qcom,pm660-charger + + reg: + maxItems: 1 + + interrupts: + maxItems: 4 + + interrupt-names: + items: + - const: usb-plugin + - const: bat-ov + - const: wdog-bark + - const: usbin-icl-change + + io-channels: + items: + - description: USB in current in uA + - description: USB in voltage in uV + + io-channel-names: + items: + - const: usbin_i + - const: usbin_v + + monitored-battery: + description: phandle to the simple-battery node + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + - interrupt-names + - io-channels + - io-channel-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include + + pmic { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <4>; + + charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", + "usbin_v"; + + monitored-battery = <&battery>; + }; + };