From patchwork Thu May 5 18:00:33 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570881 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id DE400C433FE for ; Thu, 5 May 2022 18:28:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1383453AbiEESc2 (ORCPT ); Thu, 5 May 2022 14:32:28 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56308 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385413AbiEESa0 (ORCPT ); Thu, 5 May 2022 14:30:26 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 349AC5DBE6; Thu, 5 May 2022 11:21:11 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id 6b9b41d5d424d27d; Thu, 5 May 2022 20:19:44 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id F2AB966C2F2; Thu, 5 May 2022 20:19:42 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 01/11] PCI/PM: Split pci_raw_set_power_state() Date: Thu, 05 May 2022 20:00:33 +0200 Message-ID: <13038676.uLZWGnKmhe@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgepudenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki The transitions from low-power states to D0 and the other way around are unnecessarily tangled in pci_raw_set_power_state() which makes it rather hard to follow. Moreover, the only caller of pci_raw_set_power_state() passing PCI_D0 as its state argument is pci_power_up(), so the code carrying out transitions into D0 can be put directly into that function. Accordingly, move the code handling transitions from low-power states into D0 directly into pci_power_up() and rename the remaining part of pci_raw_set_power_state() to pci_set_low_power_state(), because it only handles transitions into low-power state now. While at it, fix up some white space, update some comments and modify messages printed by pci_power_up() and pci_set_low_power_state() to be less confusing (which is the only expected functional impact of this change). Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 143 +++++++++++++++++++++++++++++++----------------------- 1 file changed, 83 insertions(+), 60 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1068,10 +1068,11 @@ static inline bool platform_pci_bridge_d } /** - * pci_raw_set_power_state - Use PCI PM registers to set the power state of - * given PCI device + * pci_set_low_power_state - Put a PCI device into a low-power state. * @dev: PCI device to handle. - * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * @state: PCI power state (D1, D2, D3hot) to put the device into. + * + * Use the device's PCI_PM_CTRL register to put it into a low-power state. * * RETURN VALUE: * -EINVAL if the requested state is invalid. @@ -1080,10 +1081,9 @@ static inline bool platform_pci_bridge_d * 0 if device already is in the requested state. * 0 if device's power state has been successfully changed. */ -static int pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) +static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) { u16 pmcsr; - bool need_restore = false; /* Check if we're already there */ if (dev->current_state == state) @@ -1092,7 +1092,7 @@ static int pci_raw_set_power_state(struc if (!dev->pm_cap) return -EIO; - if (state < PCI_D0 || state > PCI_D3hot) + if (state < PCI_D1 || state > PCI_D3hot) return -EINVAL; /* @@ -1101,8 +1101,7 @@ static int pci_raw_set_power_state(struc * we can go from D1 to D3, but we can't go directly from D3 to D1; * we'd have to go from D3 to D0, then to D1. */ - if (state != PCI_D0 && dev->current_state <= PCI_D3cold - && dev->current_state > state) { + if (dev->current_state <= PCI_D3cold && dev->current_state > state) { pci_err(dev, "invalid power transition (from %s to %s)\n", pci_power_name(dev->current_state), pci_power_name(state)); @@ -1116,70 +1115,30 @@ static int pci_raw_set_power_state(struc pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); if (PCI_POSSIBLE_ERROR(pmcsr)) { - pci_err(dev, "can't change power state from %s to %s (config space inaccessible)\n", + pci_err(dev, "Unable to change power state from %s to %s, device inaccessible\n", pci_power_name(dev->current_state), pci_power_name(state)); return -EIO; } - /* - * If we're (effectively) in D3, force entire word to 0. - * This doesn't affect PME_Status, disables PME_En, and - * sets PowerState to 0. - */ - switch (dev->current_state) { - case PCI_D0: - case PCI_D1: - case PCI_D2: - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= state; - break; - case PCI_D3hot: - case PCI_D3cold: - case PCI_UNKNOWN: /* Boot-up */ - if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot - && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) - need_restore = true; - fallthrough; /* force to D0 */ - default: - pmcsr = 0; - break; - } + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= state; /* Enter specified state */ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - /* - * Mandatory power management transition delays; see PCI PM 1.1 - * 5.6.1 table 18 - */ - if (state == PCI_D3hot || dev->current_state == PCI_D3hot) + /* Mandatory power management transition delays; see PCI PM 1.2. */ + if (state == PCI_D3hot) pci_dev_d3_sleep(dev); - else if (state == PCI_D2 || dev->current_state == PCI_D2) + else if (state == PCI_D2) udelay(PCI_PM_D2_DELAY); pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); - dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; if (dev->current_state != state) - pci_info_ratelimited(dev, "refused to change power state from %s to %s\n", - pci_power_name(dev->current_state), - pci_power_name(state)); - - /* - * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT - * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning - * from D3hot to D0 _may_ perform an internal reset, thereby - * going to "D0 Uninitialized" rather than "D0 Initialized". - * For example, at least some versions of the 3c905B and the - * 3c556B exhibit this behaviour. - * - * At least some laptop BIOSen (e.g. the Thinkpad T21) leave - * devices in a D3hot state at boot. Consequently, we need to - * restore at least the BARs so that the device will be - * accessible to its driver. - */ - if (need_restore) - pci_restore_bars(dev); + pci_info_ratelimited(dev, "Refused to change power state from %s to %s\n", + pci_power_name(dev->current_state), + pci_power_name(state)); if (dev->bus->self) pcie_aspm_pm_state_change(dev->bus->self); @@ -1312,8 +1271,72 @@ static int pci_dev_wait(struct pci_dev * */ int pci_power_up(struct pci_dev *dev) { + bool need_restore = false; + u16 pmcsr; + pci_platform_power_transition(dev, PCI_D0); - return pci_raw_set_power_state(dev, PCI_D0); + + if (dev->current_state == PCI_D0) + return 0; + + if (!dev->pm_cap) + return -EIO; + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + if (PCI_POSSIBLE_ERROR(pmcsr)) { + pci_err(dev, "Unable to change power state from %s to D0, device inaccessible\n", + pci_power_name(dev->current_state)); + return -EIO; + } + + /* + * If we're (effectively) in D3, force entire word to 0. This doesn't + * affect PME_Status, disables PME_En, and sets PowerState to 0. + */ + if (dev->current_state >= PCI_D3hot) { + if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && + !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) + need_restore = true; + + pmcsr = 0; + } else { + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + } + + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + + /* Mandatory transition delays; see PCI PM 1.2. */ + if (dev->current_state == PCI_D3hot) + pci_dev_d3_sleep(dev); + else if (dev->current_state == PCI_D2) + udelay(PCI_PM_D2_DELAY); + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; + if (dev->current_state != PCI_D0) + pci_info_ratelimited(dev, "Refused to change power state from %s to D0\n", + pci_power_name(dev->current_state)); + + /* + * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT + * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning + * from D3hot to D0 _may_ perform an internal reset, thereby + * going to "D0 Uninitialized" rather than "D0 Initialized". + * For example, at least some versions of the 3c905B and the + * 3c556B exhibit this behaviour. + * + * At least some laptop BIOSen (e.g. the Thinkpad T21) leave + * devices in a D3hot state at boot. Consequently, we need to + * restore at least the BARs so that the device will be + * accessible to its driver. + */ + if (need_restore) + pci_restore_bars(dev); + + if (dev->bus->self) + pcie_aspm_pm_state_change(dev->bus->self); + + return 0; } /** @@ -1394,7 +1417,7 @@ int pci_set_power_state(struct pci_dev * * To put device in D3cold, we put device into D3hot in native * way, then put device into D3cold with platform ops */ - error = pci_raw_set_power_state(dev, state > PCI_D3hot ? + error = pci_set_low_power_state(dev, state > PCI_D3hot ? PCI_D3hot : state); if (pci_platform_power_transition(dev, state)) From patchwork Thu May 5 18:02:52 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570879 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C17E1C43217 for ; Thu, 5 May 2022 18:29:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1383808AbiEESck (ORCPT ); Thu, 5 May 2022 14:32:40 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57048 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385290AbiEESaU (ORCPT ); Thu, 5 May 2022 14:30:20 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id E9BDD5F266; Thu, 5 May 2022 11:20:55 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id c5f090cacb785d8c; Thu, 5 May 2022 20:19:42 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id 63EBB66C2F2; Thu, 5 May 2022 20:19:41 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 02/11] PCI/PM: Relocate pci_set_low_power_state() Date: Thu, 05 May 2022 20:02:52 +0200 Message-ID: <3202976.44csPzL39Z@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgepudenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Because pci_set_power_state() is the only caller of pci_set_low_power_state(), put the latter next to the former. No functional impact. Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 158 +++++++++++++++++++++++++++--------------------------- 1 file changed, 79 insertions(+), 79 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1068,85 +1068,6 @@ static inline bool platform_pci_bridge_d } /** - * pci_set_low_power_state - Put a PCI device into a low-power state. - * @dev: PCI device to handle. - * @state: PCI power state (D1, D2, D3hot) to put the device into. - * - * Use the device's PCI_PM_CTRL register to put it into a low-power state. - * - * RETURN VALUE: - * -EINVAL if the requested state is invalid. - * -EIO if device does not support PCI PM or its PM capabilities register has a - * wrong version, or device doesn't support the requested state. - * 0 if device already is in the requested state. - * 0 if device's power state has been successfully changed. - */ -static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) -{ - u16 pmcsr; - - /* Check if we're already there */ - if (dev->current_state == state) - return 0; - - if (!dev->pm_cap) - return -EIO; - - if (state < PCI_D1 || state > PCI_D3hot) - return -EINVAL; - - /* - * Validate transition: We can enter D0 from any state, but if - * we're already in a low-power state, we can only go deeper. E.g., - * we can go from D1 to D3, but we can't go directly from D3 to D1; - * we'd have to go from D3 to D0, then to D1. - */ - if (dev->current_state <= PCI_D3cold && dev->current_state > state) { - pci_err(dev, "invalid power transition (from %s to %s)\n", - pci_power_name(dev->current_state), - pci_power_name(state)); - return -EINVAL; - } - - /* Check if this device supports the desired state */ - if ((state == PCI_D1 && !dev->d1_support) - || (state == PCI_D2 && !dev->d2_support)) - return -EIO; - - pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); - if (PCI_POSSIBLE_ERROR(pmcsr)) { - pci_err(dev, "Unable to change power state from %s to %s, device inaccessible\n", - pci_power_name(dev->current_state), - pci_power_name(state)); - return -EIO; - } - - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - pmcsr |= state; - - /* Enter specified state */ - pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); - - /* Mandatory power management transition delays; see PCI PM 1.2. */ - if (state == PCI_D3hot) - pci_dev_d3_sleep(dev); - else if (state == PCI_D2) - udelay(PCI_PM_D2_DELAY); - - pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); - dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; - if (dev->current_state != state) - pci_info_ratelimited(dev, "Refused to change power state from %s to %s\n", - pci_power_name(dev->current_state), - pci_power_name(state)); - - if (dev->bus->self) - pcie_aspm_pm_state_change(dev->bus->self); - - return 0; -} - -/** * pci_update_current_state - Read power state of given device and cache it * @dev: PCI device to handle. * @state: State to cache in case the device doesn't have the PM capability @@ -1364,6 +1285,85 @@ void pci_bus_set_current_state(struct pc } /** + * pci_set_low_power_state - Put a PCI device into a low-power state. + * @dev: PCI device to handle. + * @state: PCI power state (D1, D2, D3hot) to put the device into. + * + * Use the device's PCI_PM_CTRL register to put it into a low-power state. + * + * RETURN VALUE: + * -EINVAL if the requested state is invalid. + * -EIO if device does not support PCI PM or its PM capabilities register has a + * wrong version, or device doesn't support the requested state. + * 0 if device already is in the requested state. + * 0 if device's power state has been successfully changed. + */ +static int pci_set_low_power_state(struct pci_dev *dev, pci_power_t state) +{ + u16 pmcsr; + + /* Check if we're already there */ + if (dev->current_state == state) + return 0; + + if (!dev->pm_cap) + return -EIO; + + if (state < PCI_D1 || state > PCI_D3hot) + return -EINVAL; + + /* + * Validate transition: We can enter D0 from any state, but if + * we're already in a low-power state, we can only go deeper. E.g., + * we can go from D1 to D3, but we can't go directly from D3 to D1; + * we'd have to go from D3 to D0, then to D1. + */ + if (dev->current_state <= PCI_D3cold && dev->current_state > state) { + pci_err(dev, "invalid power transition (from %s to %s)\n", + pci_power_name(dev->current_state), + pci_power_name(state)); + return -EINVAL; + } + + /* Check if this device supports the desired state */ + if ((state == PCI_D1 && !dev->d1_support) + || (state == PCI_D2 && !dev->d2_support)) + return -EIO; + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + if (PCI_POSSIBLE_ERROR(pmcsr)) { + pci_err(dev, "Unable to change power state from %s to %s, device inaccessible\n", + pci_power_name(dev->current_state), + pci_power_name(state)); + return -EIO; + } + + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + pmcsr |= state; + + /* Enter specified state */ + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + + /* Mandatory power management transition delays; see PCI PM 1.2. */ + if (state == PCI_D3hot) + pci_dev_d3_sleep(dev); + else if (state == PCI_D2) + udelay(PCI_PM_D2_DELAY); + + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; + if (dev->current_state != state) + pci_info_ratelimited(dev, "Refused to change power state from %s to %s\n", + pci_power_name(dev->current_state), + pci_power_name(state)); + + if (dev->bus->self) + pcie_aspm_pm_state_change(dev->bus->self); + + return 0; +} + +/** * pci_set_power_state - Set the power state of a PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. From patchwork Thu May 5 18:04:07 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570091 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 666BCC433F5 for ; Thu, 5 May 2022 18:31:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1381677AbiEESdu (ORCPT ); Thu, 5 May 2022 14:33:50 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56374 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385340AbiEESaW (ORCPT ); Thu, 5 May 2022 14:30:22 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 6C77C5D644; Thu, 5 May 2022 11:21:01 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id 27807f26a92f6163; Thu, 5 May 2022 20:19:40 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id D246266C2F5; Thu, 5 May 2022 20:19:39 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 03/11] PCI/PM: Set current_state to D3cold if the device is not accessible Date: Thu, 05 May 2022 20:04:07 +0200 Message-ID: <10104376.nUPlyArG6x@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Make pci_power_up() and pci_set_low_power_state() change current_state to PCI_D3cold when the device is not accessible along the lines of pci_update_current_state(). Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 2 ++ 1 file changed, 2 insertions(+) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1207,6 +1207,7 @@ int pci_power_up(struct pci_dev *dev) if (PCI_POSSIBLE_ERROR(pmcsr)) { pci_err(dev, "Unable to change power state from %s to D0, device inaccessible\n", pci_power_name(dev->current_state)); + dev->current_state = PCI_D3cold; return -EIO; } @@ -1335,6 +1336,7 @@ static int pci_set_low_power_state(struc pci_err(dev, "Unable to change power state from %s to %s, device inaccessible\n", pci_power_name(dev->current_state), pci_power_name(state)); + dev->current_state = PCI_D3cold; return -EIO; } From patchwork Thu May 5 18:05:15 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570089 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B7963C433EF for ; Thu, 5 May 2022 18:31:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243506AbiEESfa (ORCPT ); Thu, 5 May 2022 14:35:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56458 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385213AbiEESaP (ORCPT ); Thu, 5 May 2022 14:30:15 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 2EC9D5EDF0; Thu, 5 May 2022 11:20:48 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id a9ec237065783df5; Thu, 5 May 2022 20:19:39 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id 4FEE266C2F2; Thu, 5 May 2022 20:19:38 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 04/11] PCI/PM: Unfold pci_platform_power_transition() in pci_power_up() Date: Thu, 05 May 2022 20:05:15 +0200 Message-ID: <1922486.PYKUYFuaPT@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Some actions carried out by pci_platform_power_transition(() in pci_power_up() are redundant, but before dealing with them, make pci_power_up() call the pci_platform_power_transition() code directly (and avoid a redundant check when pm_cap is unset while at it). Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1194,8 +1194,15 @@ int pci_power_up(struct pci_dev *dev) { bool need_restore = false; u16 pmcsr; + int ret; - pci_platform_power_transition(dev, PCI_D0); + ret = platform_pci_set_power_state(dev, PCI_D0); + if (!ret) { + pci_update_current_state(dev, PCI_D0); + } else if (!dev->pm_cap) { /* Fall back to PCI_D0 */ + dev->current_state = PCI_D0; + return 0; + } if (dev->current_state == PCI_D0) return 0; From patchwork Thu May 5 18:09:12 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570876 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A060AC433F5 for ; Thu, 5 May 2022 18:32:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1383176AbiEESdx (ORCPT ); Thu, 5 May 2022 14:33:53 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56332 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385318AbiEESaU (ORCPT ); Thu, 5 May 2022 14:30:20 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1A22E54BF4; Thu, 5 May 2022 11:21:00 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id cb2124d2900a9eb5; Thu, 5 May 2022 20:19:37 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id BEF7266C2F2; Thu, 5 May 2022 20:19:36 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 05/11] PCI/PM: Do not call pci_update_current_state() from pci_power_up() Date: Thu, 05 May 2022 20:09:12 +0200 Message-ID: <3695055.kQq0lBPeGt@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Notice that calling pci_update_current_state() from pci_power_up() is redundant and may be harmful in some cases. First, if the device is in a low-power state before pci_power_up() gets called for it and platform_pci_set_power_state() successfully changes its power state to D0, pci_update_current_state() will update current_state to reflect that and pci_power_up() will return success right away without restoring the device's BARs or reconfiguring ASPM which may be necessary. This is arguably incorrect and definitely inconsistent with the case when platform_pci_set_power_state() returns an error (for example, because the device is not power-manageable by the platform firmware). Second, current_state should not be overwritten until the decision whether or not to restore the device's BARs is made, because that decision generally depends on its value. Again, calling pci_update_current_state() in pci_power_up() is not consistent with this observation. Next, pci_power_up() attempts to read from the device's PCI_PM_CTRL register regardless of the current_state value unless it is PCI_D0, including the case when pci_update_current_state() sets current_state to PCI_D3cold to indicate that the device is not accessible. If the register read is not successful, current_state will be set to PCI_D3cold anyway, so that pci_update_current_state() action is redundant. Further, if pci_update_current_state() reads the device's PCI_PM_CTRL register, pci_power_up() will repeat that read going forward and it is not necessary to update current_state in the meantime. Finally, if pm_cap is not set (in which case the PCI_PM_CTRL register is not present), the power state of the device should be determined with the help of the platform firmware or set to D0 if that's not possible and pci_update_current_state() does not do that. Accordingly, rearrange pci_power_up() so as to address the above shortcomings. Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 49 ++++++++++++++++++++++++++++--------------------- 1 file changed, 28 insertions(+), 21 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1192,23 +1192,24 @@ static int pci_dev_wait(struct pci_dev * */ int pci_power_up(struct pci_dev *dev) { - bool need_restore = false; + bool need_restore; + pci_power_t state; u16 pmcsr; - int ret; - ret = platform_pci_set_power_state(dev, PCI_D0); - if (!ret) { - pci_update_current_state(dev, PCI_D0); - } else if (!dev->pm_cap) { /* Fall back to PCI_D0 */ - dev->current_state = PCI_D0; - return 0; - } + platform_pci_set_power_state(dev, PCI_D0); + + if (!dev->pm_cap) { + state = platform_pci_get_power_state(dev); + if (state == PCI_UNKNOWN) + dev->current_state = PCI_D0; + else + dev->current_state = state; - if (dev->current_state == PCI_D0) - return 0; + if (state == PCI_D0) + return 0; - if (!dev->pm_cap) return -EIO; + } pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); if (PCI_POSSIBLE_ERROR(pmcsr)) { @@ -1218,26 +1219,31 @@ int pci_power_up(struct pci_dev *dev) return -EIO; } + state = pmcsr & PCI_PM_CTRL_STATE_MASK; + + need_restore = (state == PCI_D3hot || dev->current_state >= PCI_D3hot) && + !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET); + + if (state == PCI_D0) { + dev->current_state = PCI_D0; + goto end; + } + /* * If we're (effectively) in D3, force entire word to 0. This doesn't * affect PME_Status, disables PME_En, and sets PowerState to 0. */ - if (dev->current_state >= PCI_D3hot) { - if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot && - !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) - need_restore = true; - + if (state == PCI_D3hot) pmcsr = 0; - } else { + else pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - } pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); /* Mandatory transition delays; see PCI PM 1.2. */ - if (dev->current_state == PCI_D3hot) + if (state == PCI_D3hot) pci_dev_d3_sleep(dev); - else if (dev->current_state == PCI_D2) + else if (state == PCI_D2) udelay(PCI_PM_D2_DELAY); pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); @@ -1246,6 +1252,7 @@ int pci_power_up(struct pci_dev *dev) pci_info_ratelimited(dev, "Refused to change power state from %s to D0\n", pci_power_name(dev->current_state)); +end: /* * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning From patchwork Thu May 5 18:10:43 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570877 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 8015DC433F5 for ; Thu, 5 May 2022 18:31:58 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1354157AbiEESfZ (ORCPT ); Thu, 5 May 2022 14:35:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55026 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385227AbiEESaQ (ORCPT ); Thu, 5 May 2022 14:30:16 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4BC5F5F241; Thu, 5 May 2022 11:20:50 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id 1873c2b789deefa0; Thu, 5 May 2022 20:19:36 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id 2DF7D66C2F2; Thu, 5 May 2022 20:19:35 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 06/11] PCI/PM: Write 0 to PMCSR in pci_power_up() in all cases Date: Thu, 05 May 2022 20:10:43 +0200 Message-ID: <5748066.MhkbZ0Pkbq@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Make pci_power_up() write 0 to the device's PCI_PM_CTRL register in order to put it into D0 regardless of the power state returned by the previous read from that register which should not matter. Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1230,15 +1230,10 @@ int pci_power_up(struct pci_dev *dev) } /* - * If we're (effectively) in D3, force entire word to 0. This doesn't - * affect PME_Status, disables PME_En, and sets PowerState to 0. + * Force the entire word to 0. This doesn't affect PME_Status, disables + * PME_En, and sets PowerState to 0. */ - if (state == PCI_D3hot) - pmcsr = 0; - else - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; - - pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, 0); /* Mandatory transition delays; see PCI PM 1.2. */ if (state == PCI_D3hot) From patchwork Thu May 5 18:13:00 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570878 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 54C4CC433EF for ; Thu, 5 May 2022 18:31:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1350214AbiEESds (ORCPT ); Thu, 5 May 2022 14:33:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:55930 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385385AbiEESaY (ORCPT ); Thu, 5 May 2022 14:30:24 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 3F9955DBC7; Thu, 5 May 2022 11:21:08 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id af71f734f8f99855; Thu, 5 May 2022 20:19:34 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id 8B3F666C2F2; Thu, 5 May 2022 20:19:33 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 07/11] PCI/PM: Split pci_power_up() Date: Thu, 05 May 2022 20:13:00 +0200 Message-ID: <1942150.usQuhbGJ8B@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki One of the two callers of pci_power_up() invokes pci_update_current_state() and pci_restore_state() right after calling it, in which case running the part of it happening after the mandatory transition delays is redundant, so move that part out of it into a new function called pci_set_full_power_state() that will be invoked from pci_set_power_state() which is the other caller of pci_power_up(). Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 41 +++++++++++++++++++++++++++++++++++------ 1 file changed, 35 insertions(+), 6 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1189,6 +1189,9 @@ static int pci_dev_wait(struct pci_dev * /** * pci_power_up - Put the given device into D0 * @dev: PCI device to power up + * + * On success, return 0 or 1, depending on whether or not it is necessary to + * restore the device's BARs subsequently (1 is returned in that case). */ int pci_power_up(struct pci_dev *dev) { @@ -1224,10 +1227,8 @@ int pci_power_up(struct pci_dev *dev) need_restore = (state == PCI_D3hot || dev->current_state >= PCI_D3hot) && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET); - if (state == PCI_D0) { - dev->current_state = PCI_D0; + if (state == PCI_D0) goto end; - } /* * Force the entire word to 0. This doesn't affect PME_Status, disables @@ -1241,13 +1242,41 @@ int pci_power_up(struct pci_dev *dev) else if (state == PCI_D2) udelay(PCI_PM_D2_DELAY); +end: + dev->current_state = PCI_D0; + if (need_restore) + return 1; + + return 0; +} + +/** + * pci_set_full_power_state - Put a PCI device into D0 and update its state + * @dev: PCI device to power up + * + * Call pci_power_up() to put @dev into D0, read from its PCI_PM_CTRL register + * to confirm the state change, restore its BARs if they might be lost and + * reconfigure ASPM in acordance with the new power state. + * + * If pci_restore_state() is going to be called right after a power state change + * to D0, it is more efficient to use pci_power_up() directly instead of this + * function. + */ +static int pci_set_full_power_state(struct pci_dev *dev) +{ + u16 pmcsr; + int ret; + + ret = pci_power_up(dev); + if (ret < 0) + return ret; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; if (dev->current_state != PCI_D0) pci_info_ratelimited(dev, "Refused to change power state from %s to D0\n", pci_power_name(dev->current_state)); -end: /* * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning @@ -1261,7 +1290,7 @@ end: * restore at least the BARs so that the device will be * accessible to its driver. */ - if (need_restore) + if (ret > 0) pci_restore_bars(dev); if (dev->bus->self) @@ -1415,7 +1444,7 @@ int pci_set_power_state(struct pci_dev * return 0; if (state == PCI_D0) - return pci_power_up(dev); + return pci_set_full_power_state(dev); /* * This device is quirked not to be put into D3, so don't put it in From patchwork Thu May 5 18:14:24 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570093 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id D36F3C433EF for ; Thu, 5 May 2022 18:29:00 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1383520AbiEESc3 (ORCPT ); Thu, 5 May 2022 14:32:29 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56474 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385357AbiEESaW (ORCPT ); Thu, 5 May 2022 14:30:22 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8D6125DA63; Thu, 5 May 2022 11:21:03 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id 33f5f557048ad12f; Thu, 5 May 2022 20:19:32 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id BE64266C2F2; Thu, 5 May 2022 20:19:31 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 08/11] PCI/PM: Do not restore BARs if device is not in D0 Date: Thu, 05 May 2022 20:14:24 +0200 Message-ID: <1849718.CQOukoFCf9@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Do not attempt to restore the device's BARs in pci_set_full_power_state() if the actual current power state of the device is not D0. Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1273,25 +1273,25 @@ static int pci_set_full_power_state(stru pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); dev->current_state = pmcsr & PCI_PM_CTRL_STATE_MASK; - if (dev->current_state != PCI_D0) + if (dev->current_state != PCI_D0) { pci_info_ratelimited(dev, "Refused to change power state from %s to D0\n", pci_power_name(dev->current_state)); - - /* - * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT - * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning - * from D3hot to D0 _may_ perform an internal reset, thereby - * going to "D0 Uninitialized" rather than "D0 Initialized". - * For example, at least some versions of the 3c905B and the - * 3c556B exhibit this behaviour. - * - * At least some laptop BIOSen (e.g. the Thinkpad T21) leave - * devices in a D3hot state at boot. Consequently, we need to - * restore at least the BARs so that the device will be - * accessible to its driver. - */ - if (ret > 0) + } else if (ret > 0) { + /* + * According to section 5.4.1 of the "PCI BUS POWER MANAGEMENT + * INTERFACE SPECIFICATION, REV. 1.2", a device transitioning + * from D3hot to D0 _may_ perform an internal reset, thereby + * going to "D0 Uninitialized" rather than "D0 Initialized". + * For example, at least some versions of the 3c905B and the + * 3c556B exhibit this behaviour. + * + * At least some laptop BIOSen (e.g. the Thinkpad T21) leave + * devices in a D3hot state at boot. Consequently, we need to + * restore at least the BARs so that the device will be + * accessible to its driver. + */ pci_restore_bars(dev); + } if (dev->bus->self) pcie_aspm_pm_state_change(dev->bus->self); From patchwork Thu May 5 18:15:34 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570875 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 373C9C433F5 for ; Thu, 5 May 2022 18:33:38 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241325AbiEEShP (ORCPT ); Thu, 5 May 2022 14:37:15 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:57816 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1381112AbiEESff (ORCPT ); Thu, 5 May 2022 14:35:35 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D242D14087; Thu, 5 May 2022 11:26:38 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id e30f9251d57c40cd; Thu, 5 May 2022 20:19:30 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id 0EFE266C2F2; Thu, 5 May 2022 20:19:30 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 09/11] PCI/PM: Clean up pci_set_low_power_state() Date: Thu, 05 May 2022 20:15:34 +0200 Message-ID: <2539071.Lt9SDvczpP@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Make the following assorted non-essential changes in pci_set_low_power_state(): 1. Drop two redundant checks from it (the caller takes care of these conditions). 2. Change the log level of a messages printed by it to "debug", because it only indicates a programming mistake. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg --- drivers/pci/pci.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1341,16 +1341,9 @@ static int pci_set_low_power_state(struc { u16 pmcsr; - /* Check if we're already there */ - if (dev->current_state == state) - return 0; - if (!dev->pm_cap) return -EIO; - if (state < PCI_D1 || state > PCI_D3hot) - return -EINVAL; - /* * Validate transition: We can enter D0 from any state, but if * we're already in a low-power state, we can only go deeper. E.g., @@ -1358,7 +1351,7 @@ static int pci_set_low_power_state(struc * we'd have to go from D3 to D0, then to D1. */ if (dev->current_state <= PCI_D3cold && dev->current_state > state) { - pci_err(dev, "invalid power transition (from %s to %s)\n", + pci_dbg(dev, "Invalid power transition (from %s to %s)\n", pci_power_name(dev->current_state), pci_power_name(state)); return -EINVAL; From patchwork Thu May 5 18:16:50 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570090 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7C1BBC433EF for ; Thu, 5 May 2022 18:31:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1385598AbiEESfZ (ORCPT ); Thu, 5 May 2022 14:35:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56946 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385269AbiEESaS (ORCPT ); Thu, 5 May 2022 14:30:18 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C929913FBD; Thu, 5 May 2022 11:20:53 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id 673a922d1a087de5; Thu, 5 May 2022 20:19:29 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id 422AB66C2F5; Thu, 5 May 2022 20:19:28 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 10/11] PCI/PM: Rearrange pci_set_power_state() Date: Thu, 05 May 2022 20:16:50 +0200 Message-ID: <2139440.Mh6RI2rZIc@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki The part of pci_set_power_state() related to transitions into low-power states is unnecessary convoluted, so clearly divide it into the D3cold special case and the general case covering all of the other states. Also fix a potential issue with calling pci_bus_set_current_state() to set the current state of all devices on the subordinate bus to D3cold without checking if the power state of the parent bridge has really changed to D3cold. Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg --- drivers/pci/pci.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) Index: linux-pm/drivers/pci/pci.c =================================================================== --- linux-pm.orig/drivers/pci/pci.c +++ linux-pm/drivers/pci/pci.c @@ -1446,19 +1446,25 @@ int pci_set_power_state(struct pci_dev * if (state >= PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - /* - * To put device in D3cold, we put device into D3hot in native - * way, then put device into D3cold with platform ops - */ - error = pci_set_low_power_state(dev, state > PCI_D3hot ? - PCI_D3hot : state); + if (state == PCI_D3cold) { + /* + * To put the device in D3cold, put it into D3hot in the native + * way, then put it into D3cold using platform ops. + */ + error = pci_set_low_power_state(dev, PCI_D3hot); - if (pci_platform_power_transition(dev, state)) - return error; + if (pci_platform_power_transition(dev, PCI_D3cold)) + return error; - /* Powering off a bridge may power off the whole hierarchy */ - if (state == PCI_D3cold) - pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + /* Powering off a bridge may power off the whole hierarchy */ + if (dev->current_state == PCI_D3cold) + pci_bus_set_current_state(dev->subordinate, PCI_D3cold); + } else { + error = pci_set_low_power_state(dev, state); + + if (pci_platform_power_transition(dev, state)) + return error; + } return 0; } From patchwork Thu May 5 18:18:09 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Rafael J. Wysocki" X-Patchwork-Id: 570092 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 85891C4332F for ; Thu, 5 May 2022 18:29:04 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1351701AbiEESci (ORCPT ); Thu, 5 May 2022 14:32:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:56468 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1385219AbiEESaQ (ORCPT ); Thu, 5 May 2022 14:30:16 -0400 Received: from cloudserver094114.home.pl (cloudserver094114.home.pl [79.96.170.134]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4158B5EDF8; Thu, 5 May 2022 11:20:49 -0700 (PDT) Received: from localhost (127.0.0.1) (HELO v370.home.net.pl) by /usr/run/smtp (/usr/run/postfix/private/idea_relay_lmtp) via UNIX with SMTP (IdeaSmtpServer 5.0.0) id 1eb1b739602ff014; Thu, 5 May 2022 20:19:27 +0200 Received: from kreacher.localnet (unknown [213.134.161.219]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 (256/256 bits) key-exchange X25519 server-signature RSA-PSS (2048 bits) server-digest SHA256) (No client certificate requested) by v370.home.net.pl (Postfix) with ESMTPSA id A82C666C2F2; Thu, 5 May 2022 20:19:26 +0200 (CEST) From: "Rafael J. Wysocki" To: Linux PCI Cc: LKML , Linux PM , Mika Westerberg , Bjorn Helgaas , Nathan Chancellor , Anders Roxell Subject: [PATCH v1 11/11] PCI/PM: Replace pci_set_power_state() in pci_pm_thaw_noirq() Date: Thu, 05 May 2022 20:18:09 +0200 Message-ID: <3639079.MHq7AAxBmi@kreacher> In-Reply-To: <4738492.GXAFRqVoOG@kreacher> References: <4738492.GXAFRqVoOG@kreacher> MIME-Version: 1.0 X-CLIENT-IP: 213.134.161.219 X-CLIENT-HOSTNAME: 213.134.161.219 X-VADE-SPAMSTATE: clean X-VADE-SPAMCAUSE: gggruggvucftvghtrhhoucdtuddrgedvfedrfedugdduvdduucetufdoteggodetrfdotffvucfrrhhofhhilhgvmecujffqoffgrffnpdggtffipffknecuuegrihhlohhuthemucduhedtnecusecvtfgvtghiphhivghnthhsucdlqddutddtmdenucfjughrpefhvfevufffkfgjfhgggfgtsehtufertddttdejnecuhfhrohhmpedftfgrfhgrvghlucflrdcuhgihshhotghkihdfuceorhhjfiesrhhjfiihshhotghkihdrnhgvtheqnecuggftrfgrthhtvghrnhepvdffueeitdfgvddtudegueejtdffteetgeefkeffvdeftddttdeuhfegfedvjefhnecukfhppedvudefrddufeegrdduiedurddvudelnecuvehluhhsthgvrhfuihiivgeptdenucfrrghrrghmpehinhgvthepvddufedrudefgedrudeiuddrvdduledphhgvlhhopehkrhgvrggthhgvrhdrlhhotggrlhhnvghtpdhmrghilhhfrhhomhepfdftrghfrggvlhculfdrucghhihsohgtkhhifdcuoehrjhifsehrjhifhihsohgtkhhirdhnvghtqedpnhgspghrtghpthhtohepjedprhgtphhtthhopehlihhnuhigqdhptghisehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqkhgvrhhnvghlsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtoheplhhinhhugidqphhmsehvghgvrhdrkhgvrhhnvghlrdhorhhgpdhrtghpthhtohepmhhikhgrrdifvghsthgvrhgsvghrgheslhhinhhugidrihhnthgv lhdrtghomhdprhgtphhtthhopehhvghlghgrrghssehkvghrnhgvlhdrohhrghdprhgtphhtthhopehnrghthhgrnheskhgvrhhnvghlrdhorhhgpdhrtghpthhtoheprghnuggvrhhsrdhrohigvghllheslhhinhgrrhhordhorhhg X-DCC--Metrics: v370.home.net.pl 1024; Body=7 Fuz1=7 Fuz2=7 Precedence: bulk List-ID: X-Mailing-List: linux-pm@vger.kernel.org From: Rafael J. Wysocki Calling pci_set_power_state() to put the given device into D0 in pci_pm_thaw_noirq() may cause it to restore the device's BARs, which is redundant before calling pci_restore_state(), so replace it with a direct pci_power_up() call followed by pci_update_current_state() if it returns a nonzeor value, in analogy with pci_pm_default_resume_early(). Avoid code duplication by introducing a wrapper function to contain the repeating pattern and calling it in both places. Signed-off-by: Rafael J. Wysocki --- drivers/pci/pci-driver.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) Index: linux-pm/drivers/pci/pci-driver.c =================================================================== --- linux-pm.orig/drivers/pci/pci-driver.c +++ linux-pm/drivers/pci/pci-driver.c @@ -551,10 +551,15 @@ static void pci_pm_default_resume(struct pci_enable_wake(pci_dev, PCI_D0, false); } -static void pci_pm_default_resume_early(struct pci_dev *pci_dev) +static void pci_pm_power_up_and_verify_state(struct pci_dev *pci_dev) { pci_power_up(pci_dev); pci_update_current_state(pci_dev, PCI_D0); +} + +static void pci_pm_default_resume_early(struct pci_dev *pci_dev) +{ + pci_pm_power_up_and_verify_state(pci_dev); pci_restore_state(pci_dev); pci_pme_restore(pci_dev); } @@ -1079,7 +1084,7 @@ static int pci_pm_thaw_noirq(struct devi * in case the driver's "freeze" callbacks put it into a low-power * state. */ - pci_set_power_state(pci_dev, PCI_D0); + pci_pm_power_up_and_verify_state(pci_dev); pci_restore_state(pci_dev); if (pci_has_legacy_pm_support(pci_dev))