From patchwork Wed Apr 27 18:40:26 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 566808 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C8886C433EF for ; Wed, 27 Apr 2022 18:51:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231908AbiD0SzF (ORCPT ); Wed, 27 Apr 2022 14:55:05 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50934 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233879AbiD0Syp (ORCPT ); Wed, 27 Apr 2022 14:54:45 -0400 Received: from mail-wr1-x433.google.com (mail-wr1-x433.google.com [IPv6:2a00:1450:4864:20::433]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BB87D3E3A1F for ; Wed, 27 Apr 2022 11:41:18 -0700 (PDT) Received: by mail-wr1-x433.google.com with SMTP id x18so3772513wrc.0 for ; Wed, 27 Apr 2022 11:41:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=81JshLhHWnLeYe+FAG28CKV+ZD4fjG4zxsI+4Z0qeY8=; b=bu80toK7NYeqA71y0iCKqG3gVCQG0Dwp+WpuC2gfKT7WiGGBxmcXihWDQnEaSc1Zsm 3r/qJe+VCS2QGyHn4RF0IwzGH8APx7+fSyaFSKil+aoTT5PzcZWCr4rXlK9mlD86+Uph Sb7k2oN45HewsziLz6WjbWFJRh7A7QO36MUd0URiIx6o0NBARBvtB9v6tfW2lwbq/ppa 2aR18KE8+phE5/PsG5t2idj4/zdO8DfNoLA92N6j77uiCYWnUDIqV9IHE3BwRtKLr/WG OQox2/IirFLnjepUl9Qks6P9jRiqCRpfiIAIryoYlKsV7O1iVhWtL4/OTlBmMJ4cXGnF XR/g== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=81JshLhHWnLeYe+FAG28CKV+ZD4fjG4zxsI+4Z0qeY8=; b=18HcjLAH1/deV5mxYl1X86IA6rEFiGwXurgA66Urst9kjGwS3qXKFL59VxfD7IW7yH TEdKUP9GtqHOcJNnkaA5AU/LXTFmDzfa0Vu6A+y6EFLNC7fx9GVf/T2rytNJz8KB9pbW VNl00Oq7UloG1bDHTazMmI+Z3Q+69QIVXUiCa9RKu6aWMp6Iis9UDnNDwnrxkoC9xRk6 ITDZbeLJFZ4pR+ldkM4ybviATgi1+tJa+IHnIMzeCs4mlqoqxegqmgttIC6m8jRqctjo c9H/lSXS387wypHm7Ug3XmzmS97Th0YW3bepHYJQcexRsaYO6Ab6wsskKV8KTC1zOhbR LQNg== X-Gm-Message-State: AOAM5321LxMUHn6xAw/u+hZEcjweTDkGAgEnfhnkIO4hLuKNA9JgRdjz gHTfMMss4OSBXwnGZOHW6jzKkQ== X-Google-Smtp-Source: ABdhPJx8HsHaFwKTPTbysuxSagLxw6aJ/Kp9iUO+NDcsLXgLJTh8qt75lS+ihKdg2BEYxzbsgzVj2A== X-Received: by 2002:a5d:584e:0:b0:20a:9122:2c3c with SMTP id i14-20020a5d584e000000b0020a91222c3cmr23471234wrf.193.1651084877174; Wed, 27 Apr 2022 11:41:17 -0700 (PDT) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id f3-20020a5d64c3000000b0020aef267950sm1992798wri.49.2022.04.27.11.41.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Apr 2022 11:41:16 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Amit Pundir , Sumit Semwal Subject: [PATCH 1/6] power: supply: add Qualcomm PMI8998 SMB2 Charger driver Date: Wed, 27 Apr 2022 19:40:26 +0100 Message-Id: <20220427184031.2569442-2-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20220427184031.2569442-1-caleb.connolly@linaro.org> References: <20220427184031.2569442-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a driver for the SMB2 charger block found in the Qualcomm PMI8998 and PM660. Signed-off-by: Caleb Connolly --- Changes since v1: * Renamed from qcom_smb2 to qcom_pmi8998_charger --- drivers/power/supply/Kconfig | 9 + drivers/power/supply/Makefile | 1 + drivers/power/supply/qcom_pmi8998_charger.c | 1070 +++++++++++++++++++ 3 files changed, 1080 insertions(+) create mode 100644 drivers/power/supply/qcom_pmi8998_charger.c diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index 1aa8323ad9f6..1fd9ad98b607 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -897,4 +897,13 @@ config BATTERY_UG3105 device is off or suspended, the functionality of this driver is limited to reporting capacity only. +config CHARGER_QCOM_SMB2 + tristate "Qualcomm PMI8998 PMIC charger driver" + depends on MFD_SPMI_PMIC + depends on IIO + help + Say Y here to enable the Qualcomm PMIC Charger driver. This + adds support for the SMB2 switch mode battery charger found + in PMI8998 and related PMICs. + endif # POWER_SUPPLY diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile index 7f02f36aea55..a39e3eda6dbd 100644 --- a/drivers/power/supply/Makefile +++ b/drivers/power/supply/Makefile @@ -108,3 +108,4 @@ obj-$(CONFIG_BATTERY_ACER_A500) += acer_a500_battery.o obj-$(CONFIG_BATTERY_SURFACE) += surface_battery.o obj-$(CONFIG_CHARGER_SURFACE) += surface_charger.o obj-$(CONFIG_BATTERY_UG3105) += ug3105_battery.o +obj-$(CONFIG_CHARGER_QCOM_SMB2) += qcom_pmi8998_charger.o diff --git a/drivers/power/supply/qcom_pmi8998_charger.c b/drivers/power/supply/qcom_pmi8998_charger.c new file mode 100644 index 000000000000..fd4b585e72cb --- /dev/null +++ b/drivers/power/supply/qcom_pmi8998_charger.c @@ -0,0 +1,1070 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2016-2019 The Linux Foundation. All rights reserved. + * Copyright (c) 2021, Linaro Ltd. + * Author: Caleb Connolly + * + * This driver is for the switch-mode battery charger and boost + * hardware found in pmi8998 and related PMICs. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#define BATTERY_CHARGER_STATUS_1 0x06 +#define BVR_INITIAL_RAMP_BIT BIT(7) +#define CC_SOFT_TERMINATE_BIT BIT(6) +#define STEP_CHARGING_STATUS_SHIFT 3 +#define STEP_CHARGING_STATUS_MASK GENMASK(5, 3) +#define BATTERY_CHARGER_STATUS_MASK GENMASK(2, 0) + +#define BATTERY_CHARGER_STATUS_2 0x07 +#define INPUT_CURRENT_LIMITED_BIT BIT(7) +#define CHARGER_ERROR_STATUS_SFT_EXPIRE_BIT BIT(6) +#define CHARGER_ERROR_STATUS_BAT_OV_BIT BIT(5) +#define CHARGER_ERROR_STATUS_BAT_TERM_MISSING_BIT BIT(4) +#define BAT_TEMP_STATUS_MASK GENMASK(3, 0) +#define BAT_TEMP_STATUS_SOFT_LIMIT_MASK GENMASK(3, 2) +#define BAT_TEMP_STATUS_HOT_SOFT_LIMIT_BIT BIT(3) +#define BAT_TEMP_STATUS_COLD_SOFT_LIMIT_BIT BIT(2) +#define BAT_TEMP_STATUS_TOO_HOT_BIT BIT(1) +#define BAT_TEMP_STATUS_TOO_COLD_BIT BIT(0) + +#define BATTERY_CHARGER_STATUS_4 0x0A +#define CHARGE_CURRENT_POST_JEITA_MASK GENMASK(7, 0) + +#define BATTERY_CHARGER_STATUS_7 0x0D +#define ENABLE_TRICKLE_BIT BIT(7) +#define ENABLE_PRE_CHARGING_BIT BIT(6) +#define ENABLE_FAST_CHARGING_BIT BIT(5) +#define ENABLE_FULLON_MODE_BIT BIT(4) +#define TOO_COLD_ADC_BIT BIT(3) +#define TOO_HOT_ADC_BIT BIT(2) +#define HOT_SL_ADC_BIT BIT(1) +#define COLD_SL_ADC_BIT BIT(0) + +#define CHARGING_ENABLE_CMD 0x42 +#define CHARGING_ENABLE_CMD_BIT BIT(0) + +#define CHGR_CFG2 0x51 +#define CHG_EN_SRC_BIT BIT(7) +#define CHG_EN_POLARITY_BIT BIT(6) +#define PRETOFAST_TRANSITION_CFG_BIT BIT(5) +#define BAT_OV_ECC_BIT BIT(4) +#define I_TERM_BIT BIT(3) +#define AUTO_RECHG_BIT BIT(2) +#define EN_ANALOG_DROP_IN_VBATT_BIT BIT(1) +#define CHARGER_INHIBIT_BIT BIT(0) + +#define PRE_CHARGE_CURRENT_CFG 0x60 +#define PRE_CHARGE_CURRENT_SETTING_MASK GENMASK(5, 0) + +#define FAST_CHARGE_CURRENT_CFG 0x61 +#define FAST_CHARGE_CURRENT_SETTING_MASK GENMASK(7, 0) + +#define FLOAT_VOLTAGE_CFG 0x70 +#define FLOAT_VOLTAGE_SETTING_MASK GENMASK(7, 0) + +#define FG_UPDATE_CFG_2_SEL 0x7D +#define SOC_LT_OTG_THRESH_SEL_BIT BIT(3) +#define SOC_LT_CHG_RECHARGE_THRESH_SEL_BIT BIT(2) +#define VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT BIT(1) +#define IBT_LT_CHG_TERM_THRESH_SEL_BIT BIT(0) + +#define JEITA_EN_CFG 0x90 +#define JEITA_EN_HARDLIMIT_BIT BIT(4) +#define JEITA_EN_HOT_SL_FCV_BIT BIT(3) +#define JEITA_EN_COLD_SL_FCV_BIT BIT(2) +#define JEITA_EN_HOT_SL_CCC_BIT BIT(1) +#define JEITA_EN_COLD_SL_CCC_BIT BIT(0) + +#define INT_RT_STS 0x310 +#define TYPE_C_CHANGE_RT_STS_BIT BIT(7) +#define USBIN_ICL_CHANGE_RT_STS_BIT BIT(6) +#define USBIN_SOURCE_CHANGE_RT_STS_BIT BIT(5) +#define USBIN_PLUGIN_RT_STS_BIT BIT(4) +#define USBIN_OV_RT_STS_BIT BIT(3) +#define USBIN_UV_RT_STS_BIT BIT(2) +#define USBIN_LT_3P6V_RT_STS_BIT BIT(1) +#define USBIN_COLLAPSE_RT_STS_BIT BIT(0) + +#define OTG_CFG 0x153 +#define OTG_RESERVED_MASK GENMASK(7, 6) +#define DIS_OTG_ON_TLIM_BIT BIT(5) +#define QUICKSTART_OTG_FASTROLESWAP_BIT BIT(4) +#define INCREASE_DFP_TIME_BIT BIT(3) +#define ENABLE_OTG_IN_DEBUG_MODE_BIT BIT(2) +#define OTG_EN_SRC_CFG_BIT BIT(1) +#define CONCURRENT_MODE_CFG_BIT BIT(0) + +#define OTG_ENG_OTG_CFG 0x1C0 +#define ENG_BUCKBOOST_HALT1_8_MODE_BIT BIT(0) + +#define APSD_STATUS 0x307 +#define APSD_STATUS_7_BIT BIT(7) +#define HVDCP_CHECK_TIMEOUT_BIT BIT(6) +#define SLOW_PLUGIN_TIMEOUT_BIT BIT(5) +#define ENUMERATION_DONE_BIT BIT(4) +#define VADP_CHANGE_DONE_AFTER_AUTH_BIT BIT(3) +#define QC_AUTH_DONE_STATUS_BIT BIT(2) +#define QC_CHARGER_BIT BIT(1) +#define APSD_DTC_STATUS_DONE_BIT BIT(0) + +#define APSD_RESULT_STATUS 0x308 +#define ICL_OVERRIDE_LATCH_BIT BIT(7) +#define APSD_RESULT_STATUS_MASK GENMASK(6, 0) +#define QC_3P0_BIT BIT(6) +#define QC_2P0_BIT BIT(5) +#define FLOAT_CHARGER_BIT BIT(4) +#define DCP_CHARGER_BIT BIT(3) +#define CDP_CHARGER_BIT BIT(2) +#define OCP_CHARGER_BIT BIT(1) +#define SDP_CHARGER_BIT BIT(0) + +#define TYPE_C_STATUS_1 0x30B +#define UFP_TYPEC_MASK GENMASK(7, 5) +#define UFP_TYPEC_RDSTD_BIT BIT(7) +#define UFP_TYPEC_RD1P5_BIT BIT(6) +#define UFP_TYPEC_RD3P0_BIT BIT(5) +#define UFP_TYPEC_FMB_255K_BIT BIT(4) +#define UFP_TYPEC_FMB_301K_BIT BIT(3) +#define UFP_TYPEC_FMB_523K_BIT BIT(2) +#define UFP_TYPEC_FMB_619K_BIT BIT(1) +#define UFP_TYPEC_OPEN_OPEN_BIT BIT(0) + +#define TYPE_C_STATUS_2 0x30C +#define DFP_RA_OPEN_BIT BIT(7) +#define TIMER_STAGE_BIT BIT(6) +#define EXIT_UFP_MODE_BIT BIT(5) +#define EXIT_DFP_MODE_BIT BIT(4) +#define DFP_TYPEC_MASK GENMASK(3, 0) +#define DFP_RD_OPEN_BIT BIT(3) +#define DFP_RD_RA_VCONN_BIT BIT(2) +#define DFP_RD_RD_BIT BIT(1) +#define DFP_RA_RA_BIT BIT(0) + +#define TYPE_C_STATUS_3 0x30D +#define ENABLE_BANDGAP_BIT BIT(7) +#define U_USB_GND_NOVBUS_BIT BIT(6) +#define U_USB_FLOAT_NOVBUS_BIT BIT(5) +#define U_USB_GND_BIT BIT(4) +#define U_USB_FMB1_BIT BIT(3) +#define U_USB_FLOAT1_BIT BIT(2) +#define U_USB_FMB2_BIT BIT(1) +#define U_USB_FLOAT2_BIT BIT(0) + +#define TYPE_C_STATUS_4 0x30E +#define UFP_DFP_MODE_STATUS_BIT BIT(7) +#define TYPEC_VBUS_STATUS_BIT BIT(6) +#define TYPEC_VBUS_ERROR_STATUS_BIT BIT(5) +#define TYPEC_DEBOUNCE_DONE_STATUS_BIT BIT(4) +#define TYPEC_UFP_AUDIO_ADAPT_STATUS_BIT BIT(3) +#define TYPEC_VCONN_OVERCURR_STATUS_BIT BIT(2) +#define CC_ORIENTATION_BIT BIT(1) +#define CC_ATTACHED_BIT BIT(0) + +#define TYPE_C_STATUS_5 0x30F +#define TRY_SOURCE_FAILED_BIT BIT(6) +#define TRY_SINK_FAILED_BIT BIT(5) +#define TIMER_STAGE_2_BIT BIT(4) +#define TYPEC_LEGACY_CABLE_STATUS_BIT BIT(3) +#define TYPEC_NONCOMP_LEGACY_CABLE_STATUS_BIT BIT(2) +#define TYPEC_TRYSOURCE_DETECT_STATUS_BIT BIT(1) +#define TYPEC_TRYSINK_DETECT_STATUS_BIT BIT(0) + +#define CMD_APSD 0x341 +#define ICL_OVERRIDE_BIT BIT(1) +#define APSD_RERUN_BIT BIT(0) + +#define TYPE_C_CFG 0x358 +#define APSD_START_ON_CC_BIT BIT(7) +#define WAIT_FOR_APSD_BIT BIT(6) +#define FACTORY_MODE_DETECTION_EN_BIT BIT(5) +#define FACTORY_MODE_ICL_3A_4A_BIT BIT(4) +#define FACTORY_MODE_DIS_CHGING_CFG_BIT BIT(3) +#define SUSPEND_NON_COMPLIANT_CFG_BIT BIT(2) +#define VCONN_OC_CFG_BIT BIT(1) +#define TYPE_C_OR_U_USB_BIT BIT(0) + +#define TYPE_C_CFG_2 0x359 +#define TYPE_C_DFP_CURRSRC_MODE_BIT BIT(7) +#define DFP_CC_1P4V_OR_1P6V_BIT BIT(6) +#define VCONN_SOFTSTART_CFG_MASK GENMASK(5, 4) +#define EN_TRY_SOURCE_MODE_BIT BIT(3) +#define USB_FACTORY_MODE_ENABLE_BIT BIT(2) +#define TYPE_C_UFP_MODE_BIT BIT(1) +#define EN_80UA_180UA_CUR_SOURCE_BIT BIT(0) + +#define TYPE_C_CFG_3 0x35A +#define TVBUS_DEBOUNCE_BIT BIT(7) +#define TYPEC_LEGACY_CABLE_INT_EN_BIT BIT(6) +#define TYPEC_NONCOMPLIANT_LEGACY_CABLE_INT_EN_B BIT(5) +#define TYPEC_TRYSOURCE_DETECT_INT_EN_BIT BIT(4) +#define TYPEC_TRYSINK_DETECT_INT_EN_BIT BIT(3) +#define EN_TRYSINK_MODE_BIT BIT(2) +#define EN_LEGACY_CABLE_DETECTION_BIT BIT(1) +#define ALLOW_PD_DRING_UFP_TCCDB_BIT BIT(0) + +#define USBIN_OPTIONS_1_CFG 0x362 +#define CABLE_R_SEL_BIT BIT(7) +#define HVDCP_AUTH_ALG_EN_CFG_BIT BIT(6) +#define HVDCP_AUTONOMOUS_MODE_EN_CFG_BIT BIT(5) +#define INPUT_PRIORITY_BIT BIT(4) +#define AUTO_SRC_DETECT_BIT BIT(3) +#define HVDCP_EN_BIT BIT(2) +#define VADP_INCREMENT_VOLTAGE_LIMIT_BIT BIT(1) +#define VADP_TAPER_TIMER_EN_BIT BIT(0) + +#define USBIN_OPTIONS_2_CFG 0x363 +#define WIPWR_RST_EUD_CFG_BIT BIT(7) +#define SWITCHER_START_CFG_BIT BIT(6) +#define DCD_TIMEOUT_SEL_BIT BIT(5) +#define OCD_CURRENT_SEL_BIT BIT(4) +#define SLOW_PLUGIN_TIMER_EN_CFG_BIT BIT(3) +#define FLOAT_OPTIONS_MASK GENMASK(2, 0) +#define FLOAT_DIS_CHGING_CFG_BIT BIT(2) +#define SUSPEND_FLOAT_CFG_BIT BIT(1) +#define FORCE_FLOAT_SDP_CFG_BIT BIT(0) + +#define TAPER_TIMER_SEL_CFG 0x364 +#define TYPEC_SPARE_CFG_BIT BIT(7) +#define TYPEC_DRP_DFP_TIME_CFG_BIT BIT(5) +#define TAPER_TIMER_SEL_MASK GENMASK(1, 0) + +#define USBIN_LOAD_CFG 0x365 +#define USBIN_OV_CH_LOAD_OPTION_BIT BIT(7) +#define ICL_OVERRIDE_AFTER_APSD_BIT BIT(4) + +#define USBIN_ICL_OPTIONS 0x366 +#define CFG_USB3P0_SEL_BIT BIT(2) +#define USB51_MODE_BIT BIT(1) +#define USBIN_MODE_CHG_BIT BIT(0) + +#define TYPE_C_INTRPT_ENB_SOFTWARE_CTRL 0x368 +#define EXIT_SNK_BASED_ON_CC_BIT BIT(7) +#define VCONN_EN_ORIENTATION_BIT BIT(6) +#define TYPEC_VCONN_OVERCURR_INT_EN_BIT BIT(5) +#define VCONN_EN_SRC_BIT BIT(4) +#define VCONN_EN_VALUE_BIT BIT(3) +#define TYPEC_POWER_ROLE_CMD_MASK GENMASK(2, 0) +#define UFP_EN_CMD_BIT BIT(2) +#define DFP_EN_CMD_BIT BIT(1) +#define TYPEC_DISABLE_CMD_BIT BIT(0) + +#define USBIN_CURRENT_LIMIT_CFG 0x370 +#define USBIN_CURRENT_LIMIT_MASK GENMASK(7, 0) + +#define USBIN_AICL_OPTIONS_CFG 0x380 +#define SUSPEND_ON_COLLAPSE_USBIN_BIT BIT(7) +#define USBIN_AICL_HDC_EN_BIT BIT(6) +#define USBIN_AICL_START_AT_MAX_BIT BIT(5) +#define USBIN_AICL_RERUN_EN_BIT BIT(4) +#define USBIN_AICL_ADC_EN_BIT BIT(3) +#define USBIN_AICL_EN_BIT BIT(2) +#define USBIN_HV_COLLAPSE_RESPONSE_BIT BIT(1) +#define USBIN_LV_COLLAPSE_RESPONSE_BIT BIT(0) + +#define USBIN_5V_AICL_THRESHOLD_CFG 0x381 +#define USBIN_5V_AICL_THRESHOLD_CFG_MASK GENMASK(2, 0) + +#define USBIN_CONT_AICL_THRESHOLD_CFG 0x384 +#define USBIN_CONT_AICL_THRESHOLD_CFG_MASK GENMASK(5, 0) + +#define DC_ENG_SSUPPLY_CFG2 0x4C1 +#define ENG_SSUPPLY_IVREF_OTG_SS_MASK GENMASK(2, 0) +#define OTG_SS_SLOW 0x3 + +#define DCIN_AICL_REF_SEL_CFG 0x481 +#define DCIN_CONT_AICL_THRESHOLD_CFG_MASK GENMASK(5, 0) + +#define WI_PWR_OPTIONS 0x495 +#define CHG_OK_BIT BIT(7) +#define WIPWR_UVLO_IRQ_OPT_BIT BIT(6) +#define BUCK_HOLDOFF_ENABLE_BIT BIT(5) +#define CHG_OK_HW_SW_SELECT_BIT BIT(4) +#define WIPWR_RST_ENABLE_BIT BIT(3) +#define DCIN_WIPWR_IRQ_SELECT_BIT BIT(2) +#define AICL_SWITCH_ENABLE_BIT BIT(1) +#define ZIN_ICL_ENABLE_BIT BIT(0) + +#define ICL_STATUS 0x607 +#define INPUT_CURRENT_LIMIT_MASK GENMASK(7, 0) + +#define POWER_PATH_STATUS 0x60B +#define P_PATH_INPUT_SS_DONE_BIT BIT(7) +#define P_PATH_USBIN_SUSPEND_STS_BIT BIT(6) +#define P_PATH_DCIN_SUSPEND_STS_BIT BIT(5) +#define P_PATH_USE_USBIN_BIT BIT(4) +#define P_PATH_USE_DCIN_BIT BIT(3) +#define P_PATH_POWER_PATH_MASK GENMASK(2, 1) +#define P_PATH_VALID_INPUT_POWER_SOURCE_STS_BIT BIT(0) + +#define BARK_BITE_WDOG_PET 0x643 +#define BARK_BITE_WDOG_PET_BIT BIT(0) + +#define WD_CFG 0x651 +#define WATCHDOG_TRIGGER_AFP_EN_BIT BIT(7) +#define BARK_WDOG_INT_EN_BIT BIT(6) +#define BITE_WDOG_INT_EN_BIT BIT(5) +#define SFT_AFTER_WDOG_IRQ_MASK GENMASK(4, 3) +#define WDOG_IRQ_SFT_BIT BIT(2) +#define WDOG_TIMER_EN_ON_PLUGIN_BIT BIT(1) +#define WDOG_TIMER_EN_BIT BIT(0) + +#define SNARL_BARK_BITE_WD_CFG 0x653 +#define BITE_WDOG_DISABLE_CHARGING_CFG_BIT BIT(7) +#define SNARL_WDOG_TIMEOUT_MASK GENMASK(6, 4) +#define BARK_WDOG_TIMEOUT_MASK GENMASK(3, 2) +#define BITE_WDOG_TIMEOUT_MASK GENMASK(1, 0) + +#define AICL_RERUN_TIME_CFG 0x661 +#define AICL_RERUN_TIME_MASK GENMASK(1, 0) + +#define STAT_CFG 0x690 +#define STAT_SW_OVERRIDE_VALUE_BIT BIT(7) +#define STAT_SW_OVERRIDE_CFG_BIT BIT(6) +#define STAT_PARALLEL_OFF_DG_CFG_MASK GENMASK(5, 4) +#define STAT_POLARITY_CFG_BIT BIT(3) +#define STAT_PARALLEL_CFG_BIT BIT(2) +#define STAT_FUNCTION_CFG_BIT BIT(1) +#define STAT_IRQ_PULSING_EN_BIT BIT(0) + +#define USBIN_CURRENT_25MA 25000 +#define USBIN_CURRENT_100MA 100000 +#define USBIN_CURRENT_150MA 150000 +#define USBIN_CURRENT_500MA 500000 +#define USBIN_CURRENT_900MA 900000 +#define SDP_CURRENT_UA 500000 +#define CDP_CURRENT_UA 1500000 +#define DCP_CURRENT_UA 1500000 + +enum charger_status { + TRICKLE_CHARGE = 0, + PRE_CHARGE, + FAST_CHARGE, + FULLON_CHARGE, + TAPER_CHARGE, + TERMINATE_CHARGE, + INHIBIT_CHARGE, + DISABLE_CHARGE, +}; + +struct smb2_register { + u16 addr; + u8 mask; + u8 val; +}; + +/** + * struct smb2_chip - smb2 chip structure + * @dev: Device reference for power_supply + * @name: The platform device name + * @base: Base address for smb2 registers + * @regmap: Register map + * @batt_info: Battery data from DT + * @status_change_work: Worker to handle plug/unplug events + * @usb_in_i_chan: USB_IN current measurement channel + * @usb_in_v_chan: USB_IN voltage measurement channel + * @chg_psy: Charger power supply instance + */ +struct smb2_chip { + struct device *dev; + const char *name; + unsigned int base; + struct regmap *regmap; + struct power_supply_battery_info *batt_info; + + struct delayed_work status_change_work; + + struct iio_channel *usb_in_i_chan; + struct iio_channel *usb_in_v_chan; + + struct power_supply *chg_psy; +}; + +static enum power_supply_property smb2_properties[] = { + POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_MODEL_NAME, + POWER_SUPPLY_PROP_CURRENT_MAX, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_USB_TYPE, +}; + +static enum power_supply_usb_type smb2_usb_types[] = { + POWER_SUPPLY_USB_TYPE_UNKNOWN, + POWER_SUPPLY_USB_TYPE_SDP, + POWER_SUPPLY_USB_TYPE_DCP, + POWER_SUPPLY_USB_TYPE_CDP, +}; + +int smb2_get_prop_usb_online(struct smb2_chip *chip, int *val) +{ + unsigned int stat; + int rc; + + rc = regmap_read(chip->regmap, chip->base + POWER_PATH_STATUS, + &stat); + if (rc < 0) { + dev_err(chip->dev, "Couldn't read POWER_PATH_STATUS! ret=%d\n", + rc); + return rc; + } + + *val = (stat & P_PATH_USE_USBIN_BIT) && + (stat & P_PATH_VALID_INPUT_POWER_SOURCE_STS_BIT); + return 0; +} + +/* + * Qualcomm "automatic power source detection" aka APSD + * tells us what type of charger we're connected to. + */ +static int smb2_apsd_get_charger_type(struct smb2_chip *chip, int *val) +{ + int rc; + unsigned int apsd_stat, stat; + int usb_online; + + rc = smb2_get_prop_usb_online(chip, &usb_online); + if (rc < 0 || !usb_online) { + *val = POWER_SUPPLY_USB_TYPE_UNKNOWN; + return 0; + } + + rc = regmap_read(chip->regmap, chip->base + APSD_STATUS, &apsd_stat); + if (rc < 0) { + dev_err(chip->dev, "Failed to read apsd status, rc = %d", rc); + return rc; + } + if (!(apsd_stat & APSD_DTC_STATUS_DONE_BIT)) { + dev_err(chip->dev, "Apsd not ready"); + return -EAGAIN; + } + + rc = regmap_read(chip->regmap, chip->base + APSD_RESULT_STATUS, &stat); + if (rc < 0) { + dev_err(chip->dev, "Failed to read apsd result, rc = %d", rc); + return rc; + } + + stat &= APSD_RESULT_STATUS_MASK; + + if (stat & CDP_CHARGER_BIT) + *val = POWER_SUPPLY_USB_TYPE_CDP; + else if (stat & (DCP_CHARGER_BIT | OCP_CHARGER_BIT | FLOAT_CHARGER_BIT)) + *val = POWER_SUPPLY_USB_TYPE_DCP; + else /* SDP_CHARGER_BIT (or others) */ + *val = POWER_SUPPLY_USB_TYPE_SDP; + + return 0; +} + +int smb2_get_prop_status(struct smb2_chip *chip, int *val) +{ + int usb_online_val; + unsigned char stat[2]; + int rc; + + rc = smb2_get_prop_usb_online(chip, &usb_online_val); + if (rc < 0) { + dev_err(chip->dev, "Couldn't get usb online property rc = %d\n", + rc); + return rc; + } + + if (!usb_online_val) { + *val = POWER_SUPPLY_STATUS_DISCHARGING; + return rc; + } + + rc = regmap_bulk_read(chip->regmap, + chip->base + BATTERY_CHARGER_STATUS_1, &stat, 2); + if (rc < 0) { + dev_err(chip->dev, "Failed to read charging status ret=%d\n", + rc); + return rc; + } + + if (stat[1] & CHARGER_ERROR_STATUS_BAT_OV_BIT) { + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + return 0; + } + + stat[0] = stat[0] & BATTERY_CHARGER_STATUS_MASK; + + switch (stat[0]) { + case TRICKLE_CHARGE: + case PRE_CHARGE: + case FAST_CHARGE: + case FULLON_CHARGE: + case TAPER_CHARGE: + *val = POWER_SUPPLY_STATUS_CHARGING; + return rc; + case DISABLE_CHARGE: + *val = POWER_SUPPLY_STATUS_NOT_CHARGING; + return rc; + case TERMINATE_CHARGE: + *val = POWER_SUPPLY_STATUS_FULL; + return rc; + case INHIBIT_CHARGE: + default: + *val = POWER_SUPPLY_STATUS_UNKNOWN; + return rc; + } +} + +static inline int smb2_get_current_limit(struct smb2_chip *chip, + unsigned int *val) +{ + int rc = regmap_read(chip->regmap, chip->base + ICL_STATUS, val); + + if (rc >= 0) + *val *= 25000; + return rc; +} + +static int smb2_set_current_limit(struct smb2_chip *chip, unsigned int val) +{ + unsigned char val_raw, icl_option; + unsigned int load_cfg; + int rc; + + if (val > 4800000) { + dev_err(chip->dev, + "Can't set current limit higher than 4800000uA"); + return -EINVAL; + } + val_raw = val / 25000; + + if (val == USBIN_CURRENT_100MA) + icl_option = 0; + else if (val == USBIN_CURRENT_150MA) + icl_option = CFG_USB3P0_SEL_BIT; + else if (val == USBIN_CURRENT_500MA) + icl_option = USB51_MODE_BIT; + else if (val == USBIN_CURRENT_900MA) + icl_option = CFG_USB3P0_SEL_BIT | USB51_MODE_BIT; + else if (val > USBIN_CURRENT_500MA) + icl_option = USBIN_MODE_CHG_BIT; + + rc = regmap_update_bits(chip->regmap, chip->base + USBIN_ICL_OPTIONS, + CFG_USB3P0_SEL_BIT | USB51_MODE_BIT | USBIN_MODE_CHG_BIT, + icl_option); + if (rc < 0) + return rc; + + return regmap_write(chip->regmap, chip->base + USBIN_CURRENT_LIMIT_CFG, val_raw); +} + +void smb2_status_change_work(struct work_struct *work) +{ + struct smb2_chip *chip = + container_of(work, struct smb2_chip, status_change_work.work); + unsigned int charger_type, current_ua; + int usb_online, count, rc; + + smb2_get_prop_usb_online(chip, &usb_online); + if (usb_online == 0) + return; + + for (count = 0; count < 3; count++) { + dev_dbg(chip->dev, "get charger type retry %d\n", count); + rc = smb2_apsd_get_charger_type(chip, &charger_type); + if (rc == 0) + break; + msleep(100); + } + + if (rc < 0) { + rc = regmap_update_bits(chip->regmap, chip->base + CMD_APSD, + APSD_RERUN_BIT, APSD_RERUN_BIT); + schedule_delayed_work(&chip->status_change_work, + msecs_to_jiffies(1500)); + dev_dbg(chip->dev, "get charger type failed, rerun apsd\n"); + return; + } + + switch (charger_type) { + case POWER_SUPPLY_USB_TYPE_CDP: + current_ua = CDP_CURRENT_UA; + break; + case POWER_SUPPLY_USB_TYPE_DCP: + current_ua = DCP_CURRENT_UA; + break; + case POWER_SUPPLY_USB_TYPE_SDP: + default: + current_ua = SDP_CURRENT_UA; + break; + } + + smb2_set_current_limit(chip, current_ua); + power_supply_changed(chip->chg_psy); +} + +int smb2_get_iio_chan(struct smb2_chip *chip, struct iio_channel *chan, + int *val) +{ + int rc; + union power_supply_propval status; + + rc = power_supply_get_property(chip->chg_psy, POWER_SUPPLY_PROP_STATUS, + &status); + if (rc < 0 || status.intval != POWER_SUPPLY_STATUS_CHARGING) { + *val = 0; + return 0; + } + + if (IS_ERR(chan)) { + dev_err(chip->dev, "Failed to chan, err = %li", PTR_ERR(chan)); + return PTR_ERR(chan); + } + + return iio_read_channel_processed(chan, val); +} + +int smb2_get_prop_health(struct smb2_chip *chip, int *val) +{ + int rc; + unsigned int stat; + + *val = POWER_SUPPLY_HEALTH_UNKNOWN; + + rc = regmap_read(chip->regmap, + chip->base + BATTERY_CHARGER_STATUS_2, &stat); + if (rc < 0) { + dev_err(chip->dev, "Couldn't read charger status rc=%d\n", rc); + return rc; + } + + switch (stat) { + case CHARGER_ERROR_STATUS_BAT_OV_BIT: + *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE; + return 0; + case BAT_TEMP_STATUS_TOO_COLD_BIT: + *val = POWER_SUPPLY_HEALTH_COLD; + return 0; + case BAT_TEMP_STATUS_TOO_HOT_BIT: + *val = POWER_SUPPLY_HEALTH_OVERHEAT; + return 0; + case BAT_TEMP_STATUS_COLD_SOFT_LIMIT_BIT: + *val = POWER_SUPPLY_HEALTH_COOL; + return 0; + case BAT_TEMP_STATUS_HOT_SOFT_LIMIT_BIT: + *val = POWER_SUPPLY_HEALTH_WARM; + return 0; + default: + *val = POWER_SUPPLY_HEALTH_GOOD; + return 0; + } +} + +static int smb2_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct smb2_chip *chip = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_MANUFACTURER: + val->strval = "Qualcomm"; + return 0; + case POWER_SUPPLY_PROP_MODEL_NAME: + val->strval = chip->name; + return 0; + case POWER_SUPPLY_PROP_CURRENT_MAX: + return smb2_get_current_limit(chip, &val->intval); + case POWER_SUPPLY_PROP_CURRENT_NOW: + return smb2_get_iio_chan(chip, chip->usb_in_i_chan, + &val->intval); + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + return smb2_get_iio_chan(chip, chip->usb_in_v_chan, + &val->intval); + case POWER_SUPPLY_PROP_ONLINE: + return smb2_get_prop_usb_online(chip, &val->intval); + case POWER_SUPPLY_PROP_STATUS: + return smb2_get_prop_status(chip, &val->intval); + case POWER_SUPPLY_PROP_HEALTH: + return smb2_get_prop_health(chip, &val->intval); + case POWER_SUPPLY_PROP_USB_TYPE: + return smb2_apsd_get_charger_type(chip, &val->intval); + default: + dev_err(chip->dev, "invalid property: %d\n", psp); + return -EINVAL; + } +} + +static int smb2_set_property(struct power_supply *psy, + enum power_supply_property psp, + const union power_supply_propval *val) +{ + struct smb2_chip *chip = power_supply_get_drvdata(psy); + + switch (psp) { + case POWER_SUPPLY_PROP_CURRENT_MAX: + return smb2_set_current_limit(chip, val->intval); + default: + dev_err(chip->dev, "No setter for property: %d\n", psp); + return -EINVAL; + } +} + +static int smb2_property_is_writable(struct power_supply *psy, + enum power_supply_property psp) +{ + switch (psp) { + case POWER_SUPPLY_PROP_CURRENT_MAX: + return 1; + default: + return 0; + } +} + +irqreturn_t smb2_handle_batt_overvoltage(int irq, void *data) +{ + struct smb2_chip *chip = data; + unsigned int status; + + regmap_read(chip->regmap, + chip->base + BATTERY_CHARGER_STATUS_2, &status); + + if (status & CHARGER_ERROR_STATUS_BAT_OV_BIT) { + /* The hardware stops charging automatically */ + dev_err(chip->dev, "battery overvoltage detected, charging stopped\n"); + power_supply_changed(chip->chg_psy); + } + + return IRQ_HANDLED; +} + +irqreturn_t smb2_handle_usb_plugin(int irq, void *data) +{ + struct smb2_chip *chip = data; + + power_supply_changed(chip->chg_psy); + + schedule_delayed_work(&chip->status_change_work, + msecs_to_jiffies(1000)); + + return IRQ_HANDLED; +} + +irqreturn_t smb2_handle_usb_icl_change(int irq, void *data) +{ + struct smb2_chip *chip = data; + + power_supply_changed(chip->chg_psy); + + return IRQ_HANDLED; +} + +irqreturn_t smb2_handle_wdog_bark(int irq, void *data) +{ + struct smb2_chip *chip = data; + int rc; + + power_supply_changed(chip->chg_psy); + + rc = regmap_write(chip->regmap, BARK_BITE_WDOG_PET, BARK_BITE_WDOG_PET_BIT); + if (rc < 0) + dev_err(chip->dev, "Couldn't pet the dog rc=%d\n", rc); + + return IRQ_HANDLED; +} + +static const struct power_supply_desc smb2_psy_desc = { + .name = "pmi8998_charger", + .type = POWER_SUPPLY_TYPE_USB, + .usb_types = smb2_usb_types, + .num_usb_types = ARRAY_SIZE(smb2_usb_types), + .properties = smb2_properties, + .num_properties = ARRAY_SIZE(smb2_properties), + .get_property = smb2_get_property, + .set_property = smb2_set_property, + .property_is_writeable = smb2_property_is_writable, +}; + +/* Init sequence derived from vendor downstream driver */ +static const struct smb2_register smb2_init_seq[] = { + { .addr = AICL_RERUN_TIME_CFG, + .mask = AICL_RERUN_TIME_MASK, + .val = 0 }, + /* + * By default configure us as an upstream facing port + * FIXME: for OTG we should set UFP_EN_CMD_BIT and DFP_EN_CMD_BIT both to 0 + */ + { .addr = TYPE_C_INTRPT_ENB_SOFTWARE_CTRL, + .mask = TYPEC_POWER_ROLE_CMD_MASK | VCONN_EN_SRC_BIT + | VCONN_EN_VALUE_BIT, + .val = VCONN_EN_SRC_BIT | UFP_EN_CMD_BIT }, + /* + * disable Type-C factory mode and stay in Attached.SRC state when VCONN + * over-current happens + */ + { .addr = TYPE_C_CFG, + .mask = FACTORY_MODE_DETECTION_EN_BIT | VCONN_OC_CFG_BIT, + .val = 0 }, + /* Configure VBUS for software control */ + { .addr = OTG_CFG, .mask = OTG_EN_SRC_CFG_BIT, .val = 0 }, + { .addr = FG_UPDATE_CFG_2_SEL, + .mask = SOC_LT_CHG_RECHARGE_THRESH_SEL_BIT + | VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT, + .val = VBT_LT_CHG_RECHARGE_THRESH_SEL_BIT }, + /* Enable charging */ + { .addr = USBIN_OPTIONS_1_CFG, .mask = HVDCP_EN_BIT, .val = 0 }, + { .addr = CHARGING_ENABLE_CMD, + .mask = CHARGING_ENABLE_CMD_BIT, + .val = CHARGING_ENABLE_CMD_BIT }, + /* Allow overriding the current limit */ + { .addr = USBIN_LOAD_CFG, + .mask = ICL_OVERRIDE_AFTER_APSD_BIT, + .val = ICL_OVERRIDE_AFTER_APSD_BIT }, + { .addr = CHGR_CFG2, + .mask = CHG_EN_SRC_BIT | CHG_EN_POLARITY_BIT | PRETOFAST_TRANSITION_CFG_BIT + | BAT_OV_ECC_BIT | I_TERM_BIT | AUTO_RECHG_BIT + | EN_ANALOG_DROP_IN_VBATT_BIT | CHARGER_INHIBIT_BIT, + .val = 0 }, + /* + * No clue what this does + */ + { .addr = STAT_CFG, + .mask = STAT_SW_OVERRIDE_CFG_BIT, + .val = STAT_SW_OVERRIDE_CFG_BIT }, + /* + * Set the default SDP charger type to a 500ma USB 2.0 port + */ + { .addr = USBIN_ICL_OPTIONS, + .mask = USB51_MODE_BIT | USBIN_MODE_CHG_BIT, + .val = USB51_MODE_BIT }, + /* + * Disable watchdog + */ + { + .addr = SNARL_BARK_BITE_WD_CFG, + .mask = 0xff, + .val = 0 }, + { .addr = WD_CFG, + .mask = WATCHDOG_TRIGGER_AFP_EN_BIT | WDOG_TIMER_EN_ON_PLUGIN_BIT + | BARK_WDOG_INT_EN_BIT, + .val = 0 }, + /* OnePlus init stuff from "op_set_collapse_fet" */ + { .addr = USBIN_5V_AICL_THRESHOLD_CFG, + .mask = USBIN_5V_AICL_THRESHOLD_CFG_MASK, + .val = 0x3 }, + { .addr = USBIN_CONT_AICL_THRESHOLD_CFG, + .mask = USBIN_CONT_AICL_THRESHOLD_CFG_MASK, + .val = 0x3 }, + /* Yay undocumented register values! */ + { .addr = USBIN_LOAD_CFG, + .mask = BIT(0) | BIT(1), + .val = 0x3 }, + /* Enable Automatic Input Current Limit, this will slowly ramp up the current + * When connected to a wall charger, and automatically stop when it detects + * the charger current limit (voltage drop?) or it reaches the programmed limit. + */ + { .addr = USBIN_AICL_OPTIONS_CFG, + .mask = USBIN_AICL_START_AT_MAX_BIT | USBIN_AICL_ADC_EN_BIT | USBIN_AICL_EN_BIT + | SUSPEND_ON_COLLAPSE_USBIN_BIT | USBIN_HV_COLLAPSE_RESPONSE_BIT + | USBIN_LV_COLLAPSE_RESPONSE_BIT, + .val = USBIN_HV_COLLAPSE_RESPONSE_BIT | USBIN_LV_COLLAPSE_RESPONSE_BIT + | USBIN_AICL_EN_BIT }, + /* + * Set pre charge current to default, the OnePlus 6 bootloader + * sets this very conservatively. + * NOTE: seems to be reset to zero again anyway after boot + */ + { .addr = PRE_CHARGE_CURRENT_CFG, + .mask = PRE_CHARGE_CURRENT_SETTING_MASK, + .val = 500000 / 25000 }, + /* + * Set "fast charge current" to the default 2A, the OnePlus 6 also + * sets this very conservatively. + * NOTE: seems to be reset to zero again anyway after boot + */ + { .addr = FAST_CHARGE_CURRENT_CFG, + .mask = FAST_CHARGE_CURRENT_SETTING_MASK, + .addr = 1950000 / 25000 }, +}; + +static int smb2_init_hw(struct smb2_chip *chip) +{ + int rc, i; + + for (i = 0; i < ARRAY_SIZE(smb2_init_seq); i++) { + dev_dbg(chip->dev, "%d: Writing 0x%02x to 0x%02x\n", i, + smb2_init_seq[i].val, smb2_init_seq[i].addr); + rc = regmap_update_bits(chip->regmap, + chip->base + smb2_init_seq[i].addr, + smb2_init_seq[i].mask, + smb2_init_seq[i].val); + if (rc < 0) + return dev_err_probe(chip->dev, rc, + "%s: Failed to write 0x%02x to 0x%02x\n", + __func__, smb2_init_seq[i].val, + smb2_init_seq[i].addr); + } + + return 0; +} + +static int smb2_probe(struct platform_device *pdev) +{ + struct power_supply_config supply_config = {}; + struct smb2_chip *chip; + int rc, irq; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->dev = &pdev->dev; + chip->name = pdev->name; + + chip->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->regmap) { + return dev_err_probe(chip->dev, -ENODEV, + "failed to locate the regmap\n"); + } + + rc = device_property_read_u32(chip->dev, "reg", &chip->base); + if (rc < 0) { + return dev_err_probe(chip->dev, rc, + "Couldn't read base address\n"); + } + + irq = of_irq_get_byname(pdev->dev.of_node, "bat-ov"); + if (irq < 0) { + return dev_err_probe(&pdev->dev, irq, + "Couldn't get irq bat-ov byname\n"); + } + + rc = devm_request_threaded_irq(chip->dev, irq, NULL, + smb2_handle_batt_overvoltage, IRQF_ONESHOT, + "bat-ov", chip); + if (irq < 0) + return dev_err_probe(&pdev->dev, irq, + "Couldn't get irq bat-ov byname\n"); + + irq = of_irq_get_byname(pdev->dev.of_node, "usb-plugin"); + if (irq < 0) + return dev_err_probe(&pdev->dev, irq, + "Couldn't get irq usb-plugin byname\n"); + + rc = devm_request_threaded_irq(chip->dev, irq, NULL, + smb2_handle_usb_plugin, IRQF_ONESHOT, + "usb-plugin", chip); + if (irq < 0) + return dev_err_probe(&pdev->dev, irq, + "Couldn't request irq usb-plugin\n"); + + + irq = of_irq_get_byname(pdev->dev.of_node, "usbin-icl-change"); + if (irq < 0) { + return dev_err_probe(&pdev->dev, irq, + "Couldn't get irq usbin-icl-change byname\n"); + } + + rc = devm_request_threaded_irq(chip->dev, irq, NULL, + smb2_handle_usb_icl_change, IRQF_ONESHOT, + "usbin-icl-change", chip); + if (rc < 0) + return dev_err_probe(&pdev->dev, irq, + "Couldn't request irq usbin-icl-change\n"); + + irq = of_irq_get_byname(pdev->dev.of_node, "wdog-bark"); + if (irq < 0) { + return dev_err_probe(&pdev->dev, irq, + "Couldn't get irq wdog-bark byname\n"); + } + + rc = devm_request_threaded_irq(chip->dev, irq, NULL, + smb2_handle_wdog_bark, IRQF_ONESHOT, + "wdog-bark", chip); + if (rc < 0) + return dev_err_probe(&pdev->dev, irq, + "Couldn't request irq wdog-bark\n"); + + chip->usb_in_v_chan = iio_channel_get(chip->dev, "usbin_v"); + if (IS_ERR(chip->usb_in_v_chan)) + return dev_err_probe(chip->dev, PTR_ERR(chip->usb_in_v_chan), + "Couldn't get usbin_v IIO channel from RRADC\n"); + + chip->usb_in_i_chan = iio_channel_get(chip->dev, "usbin_i"); + if (IS_ERR(chip->usb_in_i_chan)) { + iio_channel_release(chip->usb_in_v_chan); + return dev_err_probe(chip->dev, PTR_ERR(chip->usb_in_i_chan), + "Couldn't get usbin_i IIO channel from RRADC\n"); + } + + rc = smb2_init_hw(chip); + if (rc < 0) + return rc; + + supply_config.drv_data = chip; + supply_config.of_node = pdev->dev.of_node; + + chip->chg_psy = devm_power_supply_register(chip->dev, &smb2_psy_desc, + &supply_config); + if (IS_ERR(chip->chg_psy)) + return dev_err_probe(&pdev->dev, PTR_ERR(chip->chg_psy), + "failed to register power supply\n"); + + rc = power_supply_get_battery_info(chip->chg_psy, &chip->batt_info); + if (rc) + return dev_err_probe(&pdev->dev, rc, + "Failed to get battery info\n"); + + INIT_DELAYED_WORK(&chip->status_change_work, smb2_status_change_work); + + rc = (chip->batt_info->voltage_max_design_uv - 3487500) / 7500 + 1; + rc = regmap_update_bits(chip->regmap, + chip->base + FLOAT_VOLTAGE_CFG, + FLOAT_VOLTAGE_SETTING_MASK, + rc); + if (rc < 0) + return dev_err_probe(chip->dev, rc, "Couldn't set vbat max\n"); + + platform_set_drvdata(pdev, chip); + + /* Initialise charger state */ + schedule_delayed_work(&chip->status_change_work, + msecs_to_jiffies(1000)); + + return 0; +} + +static const struct of_device_id smb2_match_id_table[] = { + { .compatible = "qcom,pmi8998-charger" }, + { .compatible = "qcom,pm660-charger" }, + { /* sentinal */ } +}; +MODULE_DEVICE_TABLE(of, smb2_match_id_table); + +static struct platform_driver qcom_spmi_smb2 = { + .probe = smb2_probe, + .driver = { + .name = "qcom-pmi8998-charger", + .of_match_table = smb2_match_id_table, + }, +}; + +module_platform_driver(qcom_spmi_smb2); + +MODULE_AUTHOR("Caleb Connolly "); +MODULE_DESCRIPTION("Qualcomm SMB2 Charger Driver"); +MODULE_LICENSE("GPL"); From patchwork Wed Apr 27 18:40:27 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 566806 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E702AC433F5 for ; Wed, 27 Apr 2022 18:52:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232064AbiD0Szu (ORCPT ); Wed, 27 Apr 2022 14:55:50 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:54318 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233932AbiD0Syp (ORCPT ); Wed, 27 Apr 2022 14:54:45 -0400 Received: from mail-wr1-x435.google.com (mail-wr1-x435.google.com [IPv6:2a00:1450:4864:20::435]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id EFEC43E4FAB for ; Wed, 27 Apr 2022 11:41:19 -0700 (PDT) Received: by mail-wr1-x435.google.com with SMTP id e24so3698292wrc.9 for ; Wed, 27 Apr 2022 11:41:19 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=5PDc4kwfq5Abwa8nZKwgraCJqPwJeISvtFvxURCWRYI=; b=UIIGGWXC9ZO6cN8r+a6HL16fNGfaaAhzbI0lQF/wnSlSs/t9eMVYFSuzoAKmV3ZtH/ 0dLq+LCinVd1U4eap4xBmPvz4nW5j0iVD0obOY7K5bu5EI/u+sGkXOuNjCPep7TEasfg aBybdJwTaX6LRsFz8T/4Ny40jViAfrFMPHdc/HyPiX6vKOouUGZ9cAHvqjZwGZG17p0T SK9skiIx6abasTdI2vQ7YGhdTI9UBDC3q2idGpA3lATiHM+0T8ZwuGnLA2m3DWvULaLm GxRR2qiSV1S4DsknDdVCeDHtw95mrLO/imrrLsyayq1IgZPLyDBiTmkz69ZLw94QQPgO dV3w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=5PDc4kwfq5Abwa8nZKwgraCJqPwJeISvtFvxURCWRYI=; b=GSXaZtn85k+i5dcPgQRE0cdFgwK5k475uQAHryFQ1xdQV5rv0x7fTmrNJZ6FjZ8Yqf TH4qruyTVBh5cdE+goHHY8aNWaM0xFzs4R8MJLd4Gr72c/AH/6hfnNizm6miGaDJ2CTS wlXM1c1RUknv+OSrbDilOiU3ra1Zxeci/XD3twEEtkZjwUSVOWda/JeQEuL2qGHakFe0 +7Y1bRF8fDIXKrwaWpWo+qEXIWJZKuaOfhpst4EwAUi0N9mSXxew8jjnU6cDyGf2Koob MiGWnGphTxCSi0L0EfE37mkAn3opHwqD2Cyb7YeYnpTF+BdN8RHJRapnXSpHWko6nGvU dt1g== X-Gm-Message-State: AOAM532VKsDNXEfAo1B7aq8KgsdrssNbqtStFYWgkRjr7a8tz+CFmVFD ugldWYLMWSKNNUIkoY4dhww6QA== X-Google-Smtp-Source: ABdhPJwdbeKT5kUGKCBIIYgVJXJw7u8BrPYYn/BNsEx7tG7fC2SfT3HwQAiYCTj6e0KUfK0qGjjVAg== X-Received: by 2002:a5d:610b:0:b0:20a:e00b:5e46 with SMTP id v11-20020a5d610b000000b0020ae00b5e46mr10875426wrt.293.1651084878587; Wed, 27 Apr 2022 11:41:18 -0700 (PDT) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id f3-20020a5d64c3000000b0020aef267950sm1992798wri.49.2022.04.27.11.41.17 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Apr 2022 11:41:17 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Amit Pundir , Sumit Semwal Subject: [PATCH 2/6] arm64: dts: qcom: pmi8998: add charger node Date: Wed, 27 Apr 2022 19:40:27 +0100 Message-Id: <20220427184031.2569442-3-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20220427184031.2569442-1-caleb.connolly@linaro.org> References: <20220427184031.2569442-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a node for the smb2 charger hardware found on the pmi8998. Signed-off-by: Caleb Connolly --- arch/arm64/boot/dts/qcom/pmi8998.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index da10668c361d..962a8719b07a 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -9,6 +9,23 @@ pmi8998_lsid0: pmic@2 { #address-cells = <1>; #size-cells = <0>; + pmi8998_charger: charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", "usbin_v"; + + status = "disabled"; + }; + pmi8998_gpio: gpios@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; From patchwork Wed Apr 27 18:40:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 567255 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A1672C433FE for ; Wed, 27 Apr 2022 18:52:39 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232006AbiD0Szs (ORCPT ); Wed, 27 Apr 2022 14:55:48 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50938 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233982AbiD0Syq (ORCPT ); Wed, 27 Apr 2022 14:54:46 -0400 Received: from mail-wm1-x335.google.com (mail-wm1-x335.google.com [IPv6:2a00:1450:4864:20::335]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BCE37EA35E for ; Wed, 27 Apr 2022 11:41:21 -0700 (PDT) Received: by mail-wm1-x335.google.com with SMTP id v64-20020a1cac43000000b0038cfd1b3a6dso3957133wme.5 for ; Wed, 27 Apr 2022 11:41:21 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=EOzQqgz02aXb8qIj3DdqRtK5QB4xG5+T1rYPUXMs6Ec=; b=sMQ00jB4PYRaPkQFfSUvqdUjsB0t3kmViFDoJ9Nk7BFqGwnnMheHWVshL7y0+Tmmkv BQijD9LFsYNhnZS3CofuWAG8kKQrWLrfmJK7I5qqOZjnFJ1bz8Z+BvKmiNC59kU7sMEm SwBR2YOgkKYGKs0WHP4GkGslf7XKbXzESEGZkHJaM7rV6YPOl/WIaZDyFdr2C6pocRkS ohBgMwbx3sadc37rGKAjCLwxZ6xBqUWXzG+VsCh5p1eiukH3ufwMwaulSu4FDmfFPo5+ MEZnSnn1atHDMaiVgsSzRrdBj0WMKTZFKadPj+KC5PsfngMTIFDejnVM5f6h65J/Xhst Tcjw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=EOzQqgz02aXb8qIj3DdqRtK5QB4xG5+T1rYPUXMs6Ec=; b=aJGUa43oWISX3ep3LVGZnskFpxc3Sz4EpW06p4Ec4jcZmiLThYyFakiCzR4pS42VNr +MRI9r5N1hKsB7sOBdxV/lDxRN4B3kT2bIwvsGqojsaJUs6151PwP2yMkwJrPqtKKifL og+gfYmKGl6OCKxzp9AbELvFWqGBwmS9pHrs3ROhXi1EKK198/kKDZyap2F1hP57nyO6 3t8DC1Wi8gSZo0AZVKRPicvhSauWPZ9pkSBznhpFs3dlwIbZHJZ/NP0UUCV5wyb/nWpE fLPIa6ZI4VWT60neBSu+EYkxtdTBSbBqcjcgG27Pvt8TlKau8oKZfY9AYGTcyo8qwTLC mfIA== X-Gm-Message-State: AOAM530PdU9ysiqdFWQcbULBZTGWMWmVQYqv7cWc6MlgiHPX86bMlZgp OFJTCViVaRwVx11s7h9yO0OxdQ== X-Google-Smtp-Source: ABdhPJwdERY7gYet7KuRWi7VwbXro7/zG2+D1IXT5t5ZUhGspXNqQd3r9PXr52s1VjbV51PZ00PFPg== X-Received: by 2002:a7b:c30d:0:b0:381:4bb9:eede with SMTP id k13-20020a7bc30d000000b003814bb9eedemr36195672wmj.74.1651084880025; Wed, 27 Apr 2022 11:41:20 -0700 (PDT) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id f3-20020a5d64c3000000b0020aef267950sm1992798wri.49.2022.04.27.11.41.18 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Apr 2022 11:41:19 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Amit Pundir , Sumit Semwal Subject: [PATCH 3/6] arm64: dts: sdm845-oneplus: enable pmi8998 charger Date: Wed, 27 Apr 2022 19:40:28 +0100 Message-Id: <20220427184031.2569442-4-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20220427184031.2569442-1-caleb.connolly@linaro.org> References: <20220427184031.2569442-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Enable the smb2 charger to expose usb attach/detach events, charging stats etc. Signed-off-by: Caleb Connolly --- arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 4 ++++ arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts | 4 ++++ arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts | 4 ++++ 3 files changed, 12 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi index 9c91ddc766af..b1fa00a8047b 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi @@ -461,6 +461,10 @@ pinconf { }; }; +&pmi8998_charger { + status = "okay"; +}; + &pmi8998_rradc { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts index bf2cf92e8976..4e119a78c568 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts @@ -32,3 +32,7 @@ &display_panel { &bq27441_fg { monitored-battery = <&battery>; }; + +&pmi8998_charger { + monitored-battery = <&battery>; +}; diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts index 1b6b5bf368df..0b610e3a8d9c 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts @@ -33,6 +33,10 @@ &bq27441_fg { monitored-battery = <&battery>; }; +&pmi8998_charger { + monitored-battery = <&battery>; +}; + &rmi4_f12 { touchscreen-y-mm = <148>; }; From patchwork Wed Apr 27 18:40:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 566809 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CFE60C4321E for ; Wed, 27 Apr 2022 18:51:54 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231658AbiD0SzD (ORCPT ); Wed, 27 Apr 2022 14:55:03 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:43110 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S233970AbiD0Syq (ORCPT ); Wed, 27 Apr 2022 14:54:46 -0400 Received: from mail-wr1-x434.google.com (mail-wr1-x434.google.com [IPv6:2a00:1450:4864:20::434]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 92A32237C1 for ; Wed, 27 Apr 2022 11:41:22 -0700 (PDT) Received: by mail-wr1-x434.google.com with SMTP id b19so3690316wrh.11 for ; Wed, 27 Apr 2022 11:41:22 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=N6G/xcwWCTxvb9G73B2XRdjPPr2MF5UR6WrCerpPvtI=; b=Eq8RmBUa6QZIrPBoaS4wU4l9ksQhkbE+j9QQwicFPr7ea96HlDJXhgWVybK81lp291 A32tb/pPMKlpwfXAfDCIpaEPK+Hx5xBCZuDGPJlnk2iAT5Vhu59xnuFOJok//ATLLCkB st01pOkCOOY5SiT9Xx0G9FC4T9dc7TthrvU/JlKqINfASBOYtr6fQmn6IrEGGtLSPBe0 HpwmdfsuvUwQ8dYQFEiGjuHmGQNVUDYibL1rHMy7Ki1GTKyG9mbFszIVfe6/spogSqw9 CWq/TX7YQM4l9Xza2E9f8Wo/+xRdzrcbZsLTUHqpNib8ebjuILDJWkJDmue6HGx6gXqJ 1phA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=N6G/xcwWCTxvb9G73B2XRdjPPr2MF5UR6WrCerpPvtI=; b=uMH97W0SRQyJ7q59uQ5GkvwvGwOTjdMa3CRXqAks9F0uY7K/pzvQFQI0FqdZg27zix VSzuSWunwCc5ZEjLaAURgb63HnhgZ4HIFPz7KDqp7J0s3w2fJTHoJquyJYNw6R/RR5ZN xFtMH98OzjNZnoKDpV/0e8Cmy316Yz/OasNp3YNG9etmVFvQzLA3epmHLliPTTY/zRbK Ji5R+Mso8YN+WrFsk5rlXUUUqD3HQOH3YvXQ7x41BzJvXRdfuVuWklnkDugt/LWv4qlk ZVZ3P80gyGZE809xXozvMB+0TpwBOPglaLL/71NoWjNeyNeVLJ7Vu4uoI1pmm8CjEGBW bjPw== X-Gm-Message-State: AOAM531SW8iNNPqLEKp+3q/cPhHV+wOrvU7FVn9HwO6UczOb5QFqBQUH 6DOWwGP0ilp0RtKkeWgwEa1n0A== X-Google-Smtp-Source: ABdhPJwZVKozldr6zcXz35GYlRTsb+89wBHEbE1Uy4aFsPphD87s+fTEG/jHqJh2dUUwdOsRDpNklA== X-Received: by 2002:a5d:6752:0:b0:20a:ce1f:2ceb with SMTP id l18-20020a5d6752000000b0020ace1f2cebmr20539629wrw.715.1651084881147; Wed, 27 Apr 2022 11:41:21 -0700 (PDT) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id f3-20020a5d64c3000000b0020aef267950sm1992798wri.49.2022.04.27.11.41.20 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Apr 2022 11:41:20 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Amit Pundir , Sumit Semwal Subject: [PATCH 4/6] arm64: dts: qcom: sdm845-db845c: enable pmi8998 charger Date: Wed, 27 Apr 2022 19:40:29 +0100 Message-Id: <20220427184031.2569442-5-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20220427184031.2569442-1-caleb.connolly@linaro.org> References: <20220427184031.2569442-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Enable the smb2 charger driver on the db845c and add a simple-battery node to report the correct VBAT voltage. Signed-off-by: Caleb Connolly --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 40a290b6d4f3..3b73b5305c51 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -240,6 +240,18 @@ vph_pwr: vph-pwr-regulator { vin-supply = <&vbat_som>; }; + + /* + * The db845c doesn't actually have a battery, but the charger circuitry + * is still wired up to support one, it needs to be programmed for nominal + * vbat voltage. See the vbat-regulator above. + */ + battery: battery { + compatible = "simple-battery"; + + voltage-min-design-microvolt = <4200000>; + voltage-max-design-microvolt = <4200000>; + }; }; &adsp_pas { @@ -603,6 +615,12 @@ &pmi8998_rradc { status = "okay"; }; +&pmi8998_charger { + status = "okay"; + + monitored-battery = <&battery>; +}; + /* QUAT I2S Uses 4 I2S SD Lines for audio on LT9611 HDMI Bridge */ &q6afedai { qi2s@22 { From patchwork Wed Apr 27 18:40:30 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 566807 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 3023AC43219 for ; Wed, 27 Apr 2022 18:52:32 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231802AbiD0Szj (ORCPT ); Wed, 27 Apr 2022 14:55:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:45904 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234074AbiD0Sy4 (ORCPT ); Wed, 27 Apr 2022 14:54:56 -0400 Received: from mail-wr1-x432.google.com (mail-wr1-x432.google.com [IPv6:2a00:1450:4864:20::432]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CA9183E5F74 for ; Wed, 27 Apr 2022 11:41:23 -0700 (PDT) Received: by mail-wr1-x432.google.com with SMTP id e2so3710755wrh.7 for ; Wed, 27 Apr 2022 11:41:23 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=eVrG7ytRhvfMLwg4sL6jbIdDhYj5gKeUGxhEwn4Bejk=; b=ZAC4yqnCU6wxempNAQjukbfA7gdhyP8AD5WocLKEYsl/gZINdkKhmxS+6Z2qcNMADd mGOsyczPBem9bXvz6wIfp0Wrg6RVR/OFnMOgte2G0zwYWb8axX09E5A8PFRl75F1P5On w2dCiweJHmbMEs+gCfSsr7PB9jYWgVGl7QVtBKtB+/XY2mO88bRGKbJjb2Rd71l30nhJ exqWYro7lwYZKkXqwSLahj2abOPV5zQAyUIwVz1GQ91qXC4IUPWY7N/RCpgocYvLQrjV 5GyLrVQ2Vw6t3gjIDFhEK4U5i1xGGPQBR6xbhCeJ9i7RvREwG9sJusvMGZv/SRPmQzaq 567w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=eVrG7ytRhvfMLwg4sL6jbIdDhYj5gKeUGxhEwn4Bejk=; b=eqfdsLZ5e+Q0HSBvuWABrzxsCpSvFomvR57N9cBP8o4fYXS/+cbgqRqbnia7TRde8A nEa9wmamclcXUhbTkd5/clMazfSbpF1MADb+mzv0vR8d2mcpIDVW957NOmlGvze2FJEJ s017AfmjxDIJU3DRg5JO5s9JLNLYjoY3CvlRjrp41KboC4wvva4c2H6GqbcngWzOIIGQ nY+lsb9n6Ro2HMluGHter0jvZlbB2IOPj3I0Z85peMQegiTQ8QTKXQ598GVQPgdku62v b0IeZoPTHV8/2GO1G6EIdFYaq3sDs39y/nAuqJHLZJd8C4bDbUed+gUGkYkLDBhD87FO cPrA== X-Gm-Message-State: AOAM533FnWW5MH2gDHdQ0M+VswIUSGFg34IoCEhO1xzCo/slP/n0bBvs 3Dw8kKBcAbN0NbvSJ7Kyq0TNSw== X-Google-Smtp-Source: ABdhPJwfIY1q/Y7VLG8aAarDaGGN9RFvQqfUgeR6vZl0dr1HP1xURjBNjME2pLvudhLaJr2H/jheew== X-Received: by 2002:a5d:6211:0:b0:1ef:85dd:c96b with SMTP id y17-20020a5d6211000000b001ef85ddc96bmr22790270wru.456.1651084882164; Wed, 27 Apr 2022 11:41:22 -0700 (PDT) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id f3-20020a5d64c3000000b0020aef267950sm1992798wri.49.2022.04.27.11.41.21 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Apr 2022 11:41:21 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Amit Pundir , Sumit Semwal Subject: [PATCH 5/6] arm64: dts: qcom: sdm845-xiaomi-beryllium enable pmi8998 charger Date: Wed, 27 Apr 2022 19:40:30 +0100 Message-Id: <20220427184031.2569442-6-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20220427184031.2569442-1-caleb.connolly@linaro.org> References: <20220427184031.2569442-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Enable the smb2 charger driver and add a battery node to report the battery stats correctly. Signed-off-by: Caleb Connolly --- .../arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts index b3b6aa4e0fa3..1a5e127d7a43 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts @@ -109,6 +109,14 @@ rmtfs_mem: memory@f6301000 { }; }; + battery: battery { + compatible = "simple-battery"; + + charge-full-design-microamp-hours = <4000000>; + voltage-min-design-microvolt = <3400000>; + voltage-max-design-microvolt = <4400000>; + }; + vreg_s4a_1p8: vreg-s4a-1p8 { compatible = "regulator-fixed"; regulator-name = "vreg_s4a_1p8"; @@ -302,6 +310,11 @@ vol_up_pin_a: vol-up-active { }; }; +&pmi8998_charger { + status = "okay"; + monitored-battery = <&battery>; +}; + &pm8998_pon { resin { compatible = "qcom,pm8941-resin"; From patchwork Wed Apr 27 18:40:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 567256 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id A4F8AC433FE for ; Wed, 27 Apr 2022 18:52:29 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231736AbiD0Szi (ORCPT ); Wed, 27 Apr 2022 14:55:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42796 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S234085AbiD0Sy5 (ORCPT ); Wed, 27 Apr 2022 14:54:57 -0400 Received: from mail-wm1-x332.google.com (mail-wm1-x332.google.com [IPv6:2a00:1450:4864:20::332]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 33442EDB47 for ; Wed, 27 Apr 2022 11:41:25 -0700 (PDT) Received: by mail-wm1-x332.google.com with SMTP id l62-20020a1c2541000000b0038e4570af2fso1723328wml.5 for ; Wed, 27 Apr 2022 11:41:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=UNAQFZYH/igEDPdHL3ir2IRYt88PXPn3Q8Z0llJsjqM=; b=CyKF3Gtrgmb7DChTG3HlP4rJaP76kaU7Pyy88pG48AITBWCw6zfeggSjVMMbPXvRU1 p5ujHRua3cun+gOuyUcEyDcPN1zcFVtvGCJfFoXZfQtm9Kqgt/EJulxsuJfWOLv6j7uO 6Eva9zTK70UGMX0wQLYHXDLwSVrOawg5AbtUZz/mlDOiU0lvphnI9Y8P3ZMuFsUoHAC3 npJergekPUXVOIYURxpSS4jKX1MF6oFivsSRx4AyDdr7PdOhS4BvpE6nRBAUmqXZOYtT AppTN7aVR9FE0XYXTikyT7vGkMMTZMaCdsXVO6ddal3pBOXQaqEf+dqYOqv77s9dLOR2 kBXQ== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=UNAQFZYH/igEDPdHL3ir2IRYt88PXPn3Q8Z0llJsjqM=; b=EAlZVuY5b2opwo3K7PqZhkiTWehaHbG3Vvdo7fBJ9Eelhw+/wBbKRFtWjPAMXTLhW8 S7TXnp9KNk+lzI2583TF6T9RoNkeSnomxotJsaQy4ejif6lMtn56UkWMJZ3RPTrHVbRb 5COXkHMx1ARyw4Lip0wDrQOHLFillu2wK2+ipQAW+AmX4WunNJEbe4l5x//aSr8W7BTM 6W9GtFVkFQpGB/ERuvfMgefKluSHzauAQWqHaYAVNI3wKm7z4VG9wVY/yswv3u6eHnpD HvsaWtlsSDOsmsCI5uoeiu/Whs65rtOVQHxMMVUSEbrMI+0ddgM5tysyK4HDMSS8znST 61jQ== X-Gm-Message-State: AOAM531d1c1cy1UCDGoNgLeg6y1nJO1LxpR58mSWWIgYpDSfK0z33ZCj XfhVV8pjalQYe5v0Lt9WFAH5/A== X-Google-Smtp-Source: ABdhPJw3sVTSRGZWSYrRc79qfqdc3uTzShD8sEa4DX2AY7xFycIkSg4u3I0cKXiCbzqFYll7z/WcCA== X-Received: by 2002:a05:600c:3b02:b0:393:e7d4:b660 with SMTP id m2-20020a05600c3b0200b00393e7d4b660mr18720272wms.183.1651084883538; Wed, 27 Apr 2022 11:41:23 -0700 (PDT) Received: from localhost.localdomain (cpc78119-cwma10-2-0-cust590.7-3.cable.virginm.net. [81.96.50.79]) by smtp.gmail.com with ESMTPSA id f3-20020a5d64c3000000b0020aef267950sm1992798wri.49.2022.04.27.11.41.22 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Wed, 27 Apr 2022 11:41:22 -0700 (PDT) From: Caleb Connolly To: caleb.connolly@linaro.org, Sebastian Reichel , Rob Herring , Krzysztof Kozlowski , Andy Gross , Bjorn Andersson , linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org Cc: Amit Pundir , Sumit Semwal Subject: [PATCH 6/6] dt-bindings: power: supply: qcom,pmi8998-charger: add bindings for smb2 driver Date: Wed, 27 Apr 2022 19:40:31 +0100 Message-Id: <20220427184031.2569442-7-caleb.connolly@linaro.org> X-Mailer: git-send-email 2.36.0 In-Reply-To: <20220427184031.2569442-1-caleb.connolly@linaro.org> References: <20220427184031.2569442-1-caleb.connolly@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add devicetree bindings for the Qualcomm PMI8998/PM660 SMB2 charger driver. Signed-off-by: Caleb Connolly --- .../power/supply/qcom,pmi8998-charger.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml diff --git a/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml new file mode 100644 index 000000000000..41b471713364 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/qcom,pmi8998-charger.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/supply/qcom,pmi8998-charger.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PMI8998/PM660 Switch-Mode Battery Charger "2" + +maintainers: + - Caleb Connolly + +properties: + compatible: + enum: + - qcom,pmi8998-charger + - qcom,pm660-charger + + reg: + maxItems: 1 + + interrupts: + minItems: 4 + maxItems: 4 + + interrupt-names: + items: + - const: usb-plugin + - const: bat-ov + - const: wdog-bark + - const: usbin-icl-change + + io-channels: + items: + - description: USB in current in uA + - description: USB in voltage in uV + + io-channel-names: + items: + - const: usbin_i + - const: usbin_v + + monitored-battery: + description: phandle to the simple-battery node + $ref: /schemas/types.yaml#/definitions/phandle + +required: + - compatible + - reg + - interrupts + - interrupt-names + - io-channels + - io-channel-names + - monitored-battery + +additionalProperties: false + +examples: + - | + #include + + pmic { + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <4>; + + charger@1000 { + compatible = "qcom,pmi8998-charger"; + reg = <0x1000>; + + interrupts = <0x2 0x12 0x2 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x4 IRQ_TYPE_EDGE_BOTH>, + <0x2 0x13 0x6 IRQ_TYPE_EDGE_RISING>, + <0x2 0x16 0x1 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "usb-plugin", "bat-ov", "wdog-bark", "usbin-icl-change"; + + io-channels = <&pmi8998_rradc 3>, + <&pmi8998_rradc 4>; + io-channel-names = "usbin_i", + "usbin_v"; + + monitored-battery = <&battery>; + }; + };