From patchwork Mon Apr 18 11:58:28 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lai Jason X-Patchwork-Id: 563737 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E56CAC433EF for ; Mon, 18 Apr 2022 11:58:44 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231689AbiDRMBW (ORCPT ); Mon, 18 Apr 2022 08:01:22 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59396 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235342AbiDRMBV (ORCPT ); Mon, 18 Apr 2022 08:01:21 -0400 Received: from mail-pj1-x102f.google.com (mail-pj1-x102f.google.com [IPv6:2607:f8b0:4864:20::102f]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id BB6501A805 for ; Mon, 18 Apr 2022 04:58:41 -0700 (PDT) Received: by mail-pj1-x102f.google.com with SMTP id n33-20020a17090a5aa400b001d28f5ee3f9so2367657pji.4 for ; Mon, 18 Apr 2022 04:58:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=RSUTOvHR9x81DktuWwrA5BNOEcj+VMAMwFa5FNnQGgo=; b=mkN7QSFSqj05HaDj6DWIWnlZapqYjRs9xHPkXzK58OqcoQwifjcsxAGGVBflS3sqEq Qmzlt98zVaVYhhGFEaUAOOtgy+HZSHFSTk7eiV9qfVJIHt6MuKzkzKi/gYfig0e/pEWS wiH+2FWo3ItPSfJw6Bbxg7JHmqp9g33cGk+IGgI8+J6VypGacdLfXtU2r+gm0oSZ/I1o bA9zF8vvEvf5dNIlhsef08JDTgu1DXJMBG2iv9yQL6RA3i/0493N6Mcsb7wFLzSQJba5 qE3nAJxV1AJj35A8N/uf8fvib1EcMU1mO7hYH4XmlKJKnx0ReRHJ6yzl5n3gmpHld11U WXHw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=RSUTOvHR9x81DktuWwrA5BNOEcj+VMAMwFa5FNnQGgo=; b=3/0pw+vPAV5HWrPVNmMAfML10veW+RZwKXrdn0pt4DjjFqJEA58QNJRDHhBMzmAhWG BPLXwRjxm9Eb8cHajQ2E9XWppzyt/aSvG3mZNzdLk+SyKsiHZiVMZfcUdQxGFQDojlmW vMAiut7+OrOKbUt2m9dw0R9cOZoke8cHx2KcVqTVPVJemCusQrQl33nsxfbGdlsTNZqe BQes0GvembeOeHLp4o5MBaUq1683vGxDILwkhZ49594fZ27es9pRsiVaLdHDbqB63hbB yGxVB1T7EZMD9kNpE2pcR15W/KMBLl5XcK6/oTt17lPlBtJfzLjluvp/O2kXlGEmvpi+ R6zA== X-Gm-Message-State: AOAM5304fLz2/vTXdNsktYFK7dI+rMVPUhs5QRMep8Waj8ZuHPbygXqt yY2Na2cOms/t6gMqgm7VoDw7d7xQIhU= X-Google-Smtp-Source: ABdhPJxJjTP9sIla8K38dELxACG1yiJlUcrCFtup9j8SpBI2r9gOonapnfffZXjKuzpIqDYLexpM6Q== X-Received: by 2002:a17:903:284:b0:158:8e21:2108 with SMTP id j4-20020a170903028400b001588e212108mr10153361plr.37.1650283121093; Mon, 18 Apr 2022 04:58:41 -0700 (PDT) Received: from jason-z170xgaming7.genesyslogic.com.tw ([122.146.30.3]) by smtp.gmail.com with ESMTPSA id u206-20020a6279d7000000b00505fdc42bf9sm12409749pfc.101.2022.04.18.04.58.39 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Apr 2022 04:58:40 -0700 (PDT) From: Jason Lai To: ulf.hansson@linaro.org, takahiro.akashi@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, dlunev@chromium.org, ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw, jason.lai@genesyslogic.com.tw, jasonlai.genesyslogic@gmail.com, Tim.Hsieh@genesyslogic.com.tw Subject: [PATCH V4 1/6] mmc: core: Cleanup printing of speed mode at card insertion Date: Mon, 18 Apr 2022 19:58:28 +0800 Message-Id: <20220418115833.10738-2-jasonlai.genesyslogic@gmail.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> References: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Ulf Hansson The current print of the bus speed mode in mmc_add_card() has grown over the years and is now difficult to parse. Let's clean up the code and also take the opportunity to properly announce "DDR" for eMMCs as "high speed DDR", which is according to the eMMC spec. Signed-off-by: Ulf Hansson --- drivers/mmc/core/bus.c | 36 ++++++++++++++++++++---------------- 1 file changed, 20 insertions(+), 16 deletions(-) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 58a60afa650b..eefe74bf1356 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -299,6 +299,7 @@ int mmc_add_card(struct mmc_card *card) { int ret; const char *type; + const char *speed_mode = ""; const char *uhs_bus_speed_mode = ""; static const char *const uhs_speeds[] = { [UHS_SDR12_BUS_SPEED] = "SDR12 ", @@ -337,27 +338,30 @@ int mmc_add_card(struct mmc_card *card) break; } + if (mmc_card_hs(card)) + speed_mode = "high speed "; + else if (mmc_card_uhs(card)) + speed_mode = "ultra high speed "; + else if (mmc_card_ddr52(card)) + speed_mode = "high speed DDR "; + else if (mmc_card_hs200(card)) + speed_mode = "HS200 "; + else if (mmc_card_hs400es(card)) + speed_mode = "HS400 Enhanced strobe "; + else if (mmc_card_hs400(card)) + speed_mode = "HS400 "; + if (mmc_card_uhs(card) && (card->sd_bus_speed < ARRAY_SIZE(uhs_speeds))) uhs_bus_speed_mode = uhs_speeds[card->sd_bus_speed]; - if (mmc_host_is_spi(card->host)) { - pr_info("%s: new %s%s%s card on SPI\n", - mmc_hostname(card->host), - mmc_card_hs(card) ? "high speed " : "", - mmc_card_ddr52(card) ? "DDR " : "", - type); - } else { - pr_info("%s: new %s%s%s%s%s%s card at address %04x\n", - mmc_hostname(card->host), - mmc_card_uhs(card) ? "ultra high speed " : - (mmc_card_hs(card) ? "high speed " : ""), - mmc_card_hs400(card) ? "HS400 " : - (mmc_card_hs200(card) ? "HS200 " : ""), - mmc_card_hs400es(card) ? "Enhanced strobe " : "", - mmc_card_ddr52(card) ? "DDR " : "", + if (mmc_host_is_spi(card->host)) + pr_info("%s: new %s%s card on SPI\n", + mmc_hostname(card->host), speed_mode, type); + else + pr_info("%s: new %s%s%s card at address %04x\n", + mmc_hostname(card->host), speed_mode, uhs_bus_speed_mode, type, card->rca); - } #ifdef CONFIG_DEBUG_FS mmc_add_card_debugfs(card); From patchwork Mon Apr 18 11:58:29 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lai Jason X-Patchwork-Id: 563247 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0251BC433EF for ; Mon, 18 Apr 2022 11:58:46 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235351AbiDRMBX (ORCPT ); Mon, 18 Apr 2022 08:01:23 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59530 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235342AbiDRMBW (ORCPT ); Mon, 18 Apr 2022 08:01:22 -0400 Received: from mail-pl1-x62e.google.com (mail-pl1-x62e.google.com [IPv6:2607:f8b0:4864:20::62e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CEF7D1A3BD for ; Mon, 18 Apr 2022 04:58:43 -0700 (PDT) Received: by mail-pl1-x62e.google.com with SMTP id s17so1325766plg.9 for ; Mon, 18 Apr 2022 04:58:43 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=h1BOU4wLrBlTMYDjgnWwiu/JosONym0WOrkivxHT0F8=; b=BVo5/yyPQK1ZmYphBw/Z+c/T5P1m4lYGyHmUSSpcfQgSRHkRZb9CQRyaNG/NFx+9k5 zME2wnF0D/eD2ZMkqG5PEkKESKVa9nyPmPO71hofyT9vigLBkv5t5BvOckHFI0AfRg/f 04b76T4l4L8P2IcByGGIrTQDbZnibqUEDPCWOAKNAlhVIgtJ17LmqhHXaYEULZb68qdX OtGuP/8velVjcWx8H1paQ7IOGAGmXF1MyWpJNxCwkOJ05GnNB4GVWWskmwYYuFNv6N+z TNrYNtV1f+0P3MkKv+2V7v6psvH8YEfI7UjAoKpYjWLohpIDbzOGO82quaNciuOG9mPZ ENYw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=h1BOU4wLrBlTMYDjgnWwiu/JosONym0WOrkivxHT0F8=; b=4KQJXqkpRz1XjLNw8mBaM7/ZNxdwcIQ/ZfLS8Q+FsvMQCxVzWhh2mOz6fuyjVsqQwo q8OVE4c+95L1At3FZpktYv4DQ17S7AIE8Zy2qbaQDrB6g6jWDbcdoCczP9Y7t3XuBGVq nF5S3Nm0Iob4P0saWW94sYCCi4t1aV+5lYZoVLn2OOYnz6DQHRBsgeYFf9M21k0S5BNx X7pJftWSyGGKj0wffuUhfYl/Xjggzn3x+S/qNfTn+jJCv1N3a2HsD8cINeagAeChuMIU TZ8cZA4GGMAApfsqtu74+X7+hR64LJkzqWkKIpEW6wYzTvuQ4F11D7vpAfclhS20fxvk 5F+g== X-Gm-Message-State: AOAM530or6JcQYlv3yVBWrapZAvZC4Mz0nZsEoTxGjPJM4eaScGRHmSS mt7250vE3So4/g6r0M9oUIY= X-Google-Smtp-Source: ABdhPJzJ8gQuWQDxQgjuZ06+7OLvICkYFOI2c56zfhUeWeZo1k11CHvVqO7+VWCsxaSR2fQIyXDZ6A== X-Received: by 2002:a17:902:ec8e:b0:158:fefd:a2c2 with SMTP id x14-20020a170902ec8e00b00158fefda2c2mr4341136plg.85.1650283123186; Mon, 18 Apr 2022 04:58:43 -0700 (PDT) Received: from jason-z170xgaming7.genesyslogic.com.tw ([122.146.30.3]) by smtp.gmail.com with ESMTPSA id u206-20020a6279d7000000b00505fdc42bf9sm12409749pfc.101.2022.04.18.04.58.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Apr 2022 04:58:43 -0700 (PDT) From: Jason Lai To: ulf.hansson@linaro.org, takahiro.akashi@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, dlunev@chromium.org, ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw, jason.lai@genesyslogic.com.tw, jasonlai.genesyslogic@gmail.com, Tim.Hsieh@genesyslogic.com.tw Subject: [PATCH V4 2/6] mmc: core: Prepare to support SD UHS-II cards Date: Mon, 18 Apr 2022 19:58:29 +0800 Message-Id: <20220418115833.10738-3-jasonlai.genesyslogic@gmail.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> References: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Ulf Hansson Updates in V4: - Re-based, updated a comment and removed white-space. - Moved MMC_VQMMC2_VOLTAGE_180 into a later patch in the series. Update in previous version: The SD UHS-II interface was introduced to the SD spec v4.00 several years ago. The interface is fundamentally different from an electrical and a protocol point of view, comparing to the legacy SD interface. However, the legacy SD protocol is supported through a specific transport layer (SD-TRAN) defined in the UHS-II addendum of the spec. This allows the SD card to be managed in a very similar way as a legacy SD card, hence a lot of code can be re-used to support these new types of cards through the mmc subsystem. Moreover, an SD card that supports the UHS-II interface shall also be backwards compatible with the legacy SD interface, which allows a UHS-II card to be inserted into a legacy slot. As a matter of fact, this is already supported by mmc subsystem as of today. To prepare to add support for UHS-II, this change puts the basic foundation in the mmc core in place, allowing it to be more easily reviewed before subsequent changes implements the actual support. Basically, the approach here adds a new UHS-II bus_ops type and adds a separate initialization path for the UHS-II card. The intent is to avoid us from sprinkling the legacy initialization path, but also to simplify implementation of the UHS-II specific bits. At this point, there is only one new host ops added to manage the various ios settings needed for UHS-II. Additional host ops that are needed, are being added from subsequent changes. Signed-off-by: Ulf Hansson --- drivers/mmc/core/Makefile | 2 +- drivers/mmc/core/core.c | 17 ++- drivers/mmc/core/core.h | 1 + drivers/mmc/core/sd_uhs2.c | 289 +++++++++++++++++++++++++++++++++++++ include/linux/mmc/card.h | 7 + include/linux/mmc/host.h | 19 +++ 6 files changed, 333 insertions(+), 2 deletions(-) create mode 100644 drivers/mmc/core/sd_uhs2.c diff --git a/drivers/mmc/core/Makefile b/drivers/mmc/core/Makefile index 6a907736cd7a..15b067e8b0d1 100644 --- a/drivers/mmc/core/Makefile +++ b/drivers/mmc/core/Makefile @@ -7,7 +7,7 @@ obj-$(CONFIG_MMC) += mmc_core.o mmc_core-y := core.o bus.o host.o \ mmc.o mmc_ops.o sd.o sd_ops.o \ sdio.o sdio_ops.o sdio_bus.o \ - sdio_cis.o sdio_io.o sdio_irq.o \ + sdio_cis.o sdio_io.o sdio_irq.o sd_uhs2.o\ slot-gpio.o regulator.o mmc_core-$(CONFIG_OF) += pwrseq.o obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 368f10405e13..fc3d8d61a97c 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2230,6 +2230,18 @@ void mmc_rescan(struct work_struct *work) goto out; } + /* + * Ideally we should favor initialization of legacy SD cards and defer + * UHS-II enumeration. However, it seems like cards doesn't reliably + * announce their support for UHS-II in the response to the ACMD41, + * while initializing the legacy SD interface. Therefore, let's start + * with UHS-II for now. + */ + if (!mmc_attach_sd_uhs2(host)) { + mmc_release_host(host); + goto out; + } + for (i = 0; i < ARRAY_SIZE(freqs); i++) { unsigned int freq = freqs[i]; if (freq > host->f_max) { @@ -2251,10 +2263,13 @@ void mmc_rescan(struct work_struct *work) void mmc_start_host(struct mmc_host *host) { + bool power_up = !(host->caps2 & + (MMC_CAP2_NO_PRESCAN_POWERUP | MMC_CAP2_SD_UHS2)); + host->f_init = max(min(freqs[0], host->f_max), host->f_min); host->rescan_disable = 0; - if (!(host->caps2 & MMC_CAP2_NO_PRESCAN_POWERUP)) { + if (power_up) { mmc_claim_host(host); mmc_power_up(host, host->ocr_avail); mmc_release_host(host); diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index f5f3f623ea49..2d80afc95e58 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -81,6 +81,7 @@ int mmc_detect_card_removed(struct mmc_host *host); int mmc_attach_mmc(struct mmc_host *host); int mmc_attach_sd(struct mmc_host *host); int mmc_attach_sdio(struct mmc_host *host); +int mmc_attach_sd_uhs2(struct mmc_host *host); /* Module parameters */ extern bool use_spi_crc; diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c new file mode 100644 index 000000000000..800957f74632 --- /dev/null +++ b/drivers/mmc/core/sd_uhs2.c @@ -0,0 +1,289 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2021 Linaro Ltd + * + * Author: Ulf Hansson + * + * Support for SD UHS-II cards + */ +#include + +#include +#include + +#include "core.h" +#include "bus.h" +#include "sd.h" +#include "mmc_ops.h" + +static const unsigned int sd_uhs2_freqs[] = { 52000000, 26000000 }; + +static int sd_uhs2_set_ios(struct mmc_host *host) +{ + struct mmc_ios *ios = &host->ios; + + return host->ops->uhs2_set_ios(host, ios); +} + +static int sd_uhs2_power_up(struct mmc_host *host) +{ + host->ios.vdd = fls(host->ocr_avail) - 1; + host->ios.clock = host->f_init; + host->ios.timing = MMC_TIMING_SD_UHS2; + host->ios.power_mode = MMC_POWER_UP; + + return sd_uhs2_set_ios(host); +} + +static void sd_uhs2_power_off(struct mmc_host *host) +{ + host->ios.vdd = 0; + host->ios.clock = 0; + host->ios.timing = MMC_TIMING_LEGACY; + host->ios.power_mode = MMC_POWER_OFF; + + sd_uhs2_set_ios(host); +} + +/* + * Run the phy initialization sequence, which mainly relies on the UHS-II host + * to check that we reach the expected electrical state, between the host and + * the card. + */ +static int sd_uhs2_phy_init(struct mmc_host *host) +{ + return 0; +} + +/* + * Do the early initialization of the card, by sending the device init broadcast + * command and wait for the process to be completed. + */ +static int sd_uhs2_dev_init(struct mmc_host *host) +{ + return 0; +} + +/* + * Run the enumeration process by sending the enumerate command to the card. + * Note that, we currently support only the point to point connection, which + * means only one card can be attached per host/slot. + */ +static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id) +{ + return 0; +} + +/* + * Read the UHS-II configuration registers (CFG_REG) of the card, by sending it + * commands and by parsing the responses. Store a copy of the relevant data in + * card->uhs2_config. + */ +static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card) +{ + return 0; +} + +/* + * Based on the card's and host's UHS-II capabilities, let's update the + * configuration of the card and the host. This may also include to move to a + * greater speed range/mode. Depending on the updated configuration, we may need + * to do a soft reset of the card via sending it a GO_DORMANT_STATE command. + * + * In the final step, let's check if the card signals "config completion", which + * indicates that the card has moved from config state into active state. + */ +static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card) +{ + return 0; +} + +/* + * Initialize the UHS-II card through the SD-TRAN transport layer. This enables + * commands/requests to be backwards compatible through the legacy SD protocol. + * UHS-II cards has a specific power limit specified for VDD1/VDD2, that should + * be set through a legacy CMD6. Note that, the power limit that becomes set, + * survives a soft reset through the GO_DORMANT_STATE command. + */ +static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card) +{ + return 0; +} + +/* + * Allocate the data structure for the mmc_card and run the UHS-II specific + * initialization sequence. + */ +static int sd_uhs2_init_card(struct mmc_host *host) +{ + struct mmc_card *card; + u32 node_id; + int err; + + err = sd_uhs2_dev_init(host); + if (err) + return err; + + err = sd_uhs2_enum(host, &node_id); + if (err) + return err; + + card = mmc_alloc_card(host, &sd_type); + if (IS_ERR(card)) + return PTR_ERR(card); + + card->uhs2_config.node_id = node_id; + card->type = MMC_TYPE_SD; + + err = sd_uhs2_config_read(host, card); + if (err) + goto err; + + err = sd_uhs2_config_write(host, card); + if (err) + goto err; + + err = sd_uhs2_legacy_init(host, card); + if (err) + goto err; + + host->card = card; + return 0; + +err: + mmc_remove_card(card); + return err; +} + +static void sd_uhs2_remove(struct mmc_host *host) +{ + mmc_remove_card(host->card); + host->card = NULL; +} + +static int sd_uhs2_alive(struct mmc_host *host) +{ + return mmc_send_status(host->card, NULL); +} + +static void sd_uhs2_detect(struct mmc_host *host) +{ + int err; + + mmc_get_card(host->card, NULL); + err = _mmc_detect_card_removed(host); + mmc_put_card(host->card, NULL); + + if (err) { + sd_uhs2_remove(host); + + mmc_claim_host(host); + mmc_detach_bus(host); + sd_uhs2_power_off(host); + mmc_release_host(host); + } +} + +static int sd_uhs2_suspend(struct mmc_host *host) +{ + return 0; +} + +static int sd_uhs2_resume(struct mmc_host *host) +{ + return 0; +} + +static int sd_uhs2_runtime_suspend(struct mmc_host *host) +{ + return 0; +} + +static int sd_uhs2_runtime_resume(struct mmc_host *host) +{ + return 0; +} + +static int sd_uhs2_shutdown(struct mmc_host *host) +{ + return 0; +} + +static int sd_uhs2_hw_reset(struct mmc_host *host) +{ + return 0; +} + +static const struct mmc_bus_ops sd_uhs2_ops = { + .remove = sd_uhs2_remove, + .alive = sd_uhs2_alive, + .detect = sd_uhs2_detect, + .suspend = sd_uhs2_suspend, + .resume = sd_uhs2_resume, + .runtime_suspend = sd_uhs2_runtime_suspend, + .runtime_resume = sd_uhs2_runtime_resume, + .shutdown = sd_uhs2_shutdown, + .hw_reset = sd_uhs2_hw_reset, +}; + +static int sd_uhs2_attach(struct mmc_host *host) +{ + int err; + + err = sd_uhs2_power_up(host); + if (err) + goto err; + + err = sd_uhs2_phy_init(host); + if (err) + goto err; + + err = sd_uhs2_init_card(host); + if (err) + goto err; + + mmc_attach_bus(host, &sd_uhs2_ops); + + mmc_release_host(host); + + err = mmc_add_card(host->card); + if (err) + goto remove_card; + + mmc_claim_host(host); + return 0; + +remove_card: + mmc_remove_card(host->card); + host->card = NULL; + mmc_claim_host(host); + mmc_detach_bus(host); +err: + sd_uhs2_power_off(host); + return err; +} + +int mmc_attach_sd_uhs2(struct mmc_host *host) +{ + int i, err = 0; + + if (!(host->caps2 & MMC_CAP2_SD_UHS2)) + return -EOPNOTSUPP; + + /* Turn off the legacy SD interface before trying with UHS-II. */ + mmc_power_off(host); + + /* + * Start UHS-II initialization at 52MHz and possibly make a retry at + * 26MHz according to the spec. It's required that the host driver + * validates ios->clock, to set a rate within the correct range. + */ + for (i = 0; i < ARRAY_SIZE(sd_uhs2_freqs); i++) { + host->f_init = sd_uhs2_freqs[i]; + err = sd_uhs2_attach(host); + if (!err) + break; + } + + return err; +} diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 37f975875102..610577d531c3 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -211,6 +211,11 @@ struct sd_ext_reg { #define SD_EXT_PERF_CMD_QUEUE (1<<4) }; +struct sd_uhs2_config { + u32 node_id; + /* TODO: Extend with more register configs. */ +}; + struct sdio_cccr { unsigned int sdio_vsn; unsigned int sd_vsn; @@ -315,6 +320,8 @@ struct mmc_card { struct sd_ext_reg ext_power; /* SD extension reg for PM */ struct sd_ext_reg ext_perf; /* SD extension reg for PERF */ + struct sd_uhs2_config uhs2_config; /* SD UHS-II config */ + unsigned int sdio_funcs; /* number of SDIO functions */ atomic_t sdio_funcs_probed; /* number of probed SDIO funcs */ struct sdio_cccr cccr; /* common card info */ diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7afb57cab00b..765469de8650 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -63,6 +63,7 @@ struct mmc_ios { #define MMC_TIMING_MMC_HS400 10 #define MMC_TIMING_SD_EXP 11 #define MMC_TIMING_SD_EXP_1_2V 12 +#define MMC_TIMING_SD_UHS2 13 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -91,6 +92,10 @@ struct mmc_clk_phase_map { struct mmc_clk_phase phase[MMC_NUM_CLK_PHASES]; }; +struct sd_uhs2_caps { + /* TODO: Add UHS-II capabilities for the host. */ +}; + struct mmc_host; struct mmc_host_ops { @@ -126,6 +131,17 @@ struct mmc_host_ops { */ void (*set_ios)(struct mmc_host *host, struct mmc_ios *ios); + /* + * The uhs2_set_ios callback is mandatory to implement for hosts that + * supports the SD UHS-II interface (MMC_CAP2_SD_UHS2), while the + * callback is unused for the other cases. Note that, the struct + * mmc_ios is being re-used for this as well. + * + * Expected return values for the uhs2_set_ios callback are a negative + * errno in case of a failure or zero for success. + */ + int (*uhs2_set_ios)(struct mmc_host *host, struct mmc_ios *ios); + /* * Return values for the get_ro callback should be: * 0 for a read/write card @@ -377,6 +393,7 @@ struct mmc_host { MMC_CAP2_HS200_1_2V_SDR) #define MMC_CAP2_SD_EXP (1 << 7) /* SD express via PCIe */ #define MMC_CAP2_SD_EXP_1_2V (1 << 8) /* SD express 1.2V */ +#define MMC_CAP2_SD_UHS2 (1 << 9) /* SD UHS-II support */ #define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */ #define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */ #define MMC_CAP2_NO_PRESCAN_POWERUP (1 << 14) /* Don't power up before scan */ @@ -403,6 +420,8 @@ struct mmc_host { #endif #define MMC_CAP2_ALT_GPT_TEGRA (1 << 28) /* Host with eMMC that has GPT entry at a non-standard location */ + struct sd_uhs2_caps uhs2_caps; /* Host UHS-II capabilities */ + int fixed_drv_type; /* fixed driver type for non-removable media */ mmc_pm_flag_t pm_caps; /* supported pm features */ From patchwork Mon Apr 18 11:58:30 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lai Jason X-Patchwork-Id: 563736 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id CFC80C433FE for ; Mon, 18 Apr 2022 11:58:48 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235342AbiDRMBZ (ORCPT ); Mon, 18 Apr 2022 08:01:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59554 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235352AbiDRMBY (ORCPT ); Mon, 18 Apr 2022 08:01:24 -0400 Received: from mail-pg1-x529.google.com (mail-pg1-x529.google.com [IPv6:2607:f8b0:4864:20::529]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F258A1A3B5 for ; Mon, 18 Apr 2022 04:58:45 -0700 (PDT) Received: by mail-pg1-x529.google.com with SMTP id j71so4969953pge.11 for ; Mon, 18 Apr 2022 04:58:45 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=k7kdy4w8KSfP2nJZjSwGWO5WOxOe85XxlLiYSqkUsQ4=; b=pgMX9DNqOtvkeens2zAOW/1JJSLcd21c4PNZIxVMynsdTVhV7lDySEIPKOjdpd8K6L an4hNT0FgnYv7AovBnG2bOcAUBR9fyenIFBLBs/SkJ6LlC+a5Kh8B/3Pd52fDRnlCBO4 uFilrQ7/UKjF0GTniFLqsFlp169zc5nNEM5pgPSyUeY16TfN4odTNSQ7wGL6OsWgdTTu gDPHyXVPAqwdkMAwWTiUHO8sU8eSlkUFfPvYcbpzwtbYZyMD2vFl8tynF+mpcNtBHF54 JTL09EWUGalIF7vVC1aGVBE9wpHW6uiEIscF+lUG9v6e2wlxviHNnYNbW5hP03AQXBJn Zutw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=k7kdy4w8KSfP2nJZjSwGWO5WOxOe85XxlLiYSqkUsQ4=; b=k4PJl/m2k60hiCgE/t5mH3YrKiAInEAziyXJ+4tJruE72QNvGbTtaPmmV6e1vaOnd8 XmpMdkSytRUewJ3bHzzLo/mcQYdGhbIuDPHeODTmSsq2fR0RCnN6+DvycuizzwCwHlrS puovqzPl9elFTM4hVFtwLEjjCMe+5UOBoPBqZ4GvOHqiEmcvAtXIpURmaqqf2ByKsYJ/ wQIFHbFeE6PTfQK4CiEkwzOg19WrDwf0pEsIUtViYzt001RW4PtOcAeXghtmxNv3HG3f rHFw3Ki4a6LlUKiqc/N4Iaw5Sp6d5XAmFf6S32e5BzIzeMfmXuuR1yGUVOAiIS67hkry +2ww== X-Gm-Message-State: AOAM533LjtCnRM35ysqMPjzkm9wkiHyA275Psl5ZQUDv5LivZDIJzKWE ZnjyHfW0HgWPbV5MGavLhEQ= X-Google-Smtp-Source: ABdhPJyLzzmytRV/GdMmk/H7RLCKdYclCzqDs+R5yEiWV9H84nCc4HChvsUW1IjN3SB08HbRRXWg0g== X-Received: by 2002:a62:e518:0:b0:4fa:9333:ddbd with SMTP id n24-20020a62e518000000b004fa9333ddbdmr11955615pff.11.1650283125232; Mon, 18 Apr 2022 04:58:45 -0700 (PDT) Received: from jason-z170xgaming7.genesyslogic.com.tw ([122.146.30.3]) by smtp.gmail.com with ESMTPSA id u206-20020a6279d7000000b00505fdc42bf9sm12409749pfc.101.2022.04.18.04.58.43 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Apr 2022 04:58:45 -0700 (PDT) From: Jason Lai To: ulf.hansson@linaro.org, takahiro.akashi@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, dlunev@chromium.org, ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw, jason.lai@genesyslogic.com.tw, jasonlai.genesyslogic@gmail.com, Tim.Hsieh@genesyslogic.com.tw Subject: [PATCH V4 3/6] mmc: core: Announce successful insertion of an SD UHS-II card Date: Mon, 18 Apr 2022 19:58:30 +0800 Message-Id: <20220418115833.10738-4-jasonlai.genesyslogic@gmail.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> References: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Ulf Hansson Updates in V4: - Make mmc_card_uhs2() take struct mmc_host* as in-param. Update in previous version: To inform the users about SD UHS-II cards, let's extend the print at card insertion with a "UHS-II" substring. Within this change, it seems reasonable to convert from using "ultra high speed" into "UHS-I speed", for the UHS-I type, as it should makes it more clear. Note that, the new print for UHS-II cards doesn't include the actual selected speed mode. Instead, this is going to be added from subsequent change. Signed-off-by: Ulf Hansson --- drivers/mmc/core/bus.c | 4 +++- drivers/mmc/core/host.h | 4 ++++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index eefe74bf1356..dd136ebb2a68 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -341,7 +341,9 @@ int mmc_add_card(struct mmc_card *card) if (mmc_card_hs(card)) speed_mode = "high speed "; else if (mmc_card_uhs(card)) - speed_mode = "ultra high speed "; + speed_mode = "UHS-I speed "; + else if (mmc_card_uhs2(card->host)) + speed_mode = "UHS-II speed "; else if (mmc_card_ddr52(card)) speed_mode = "high speed DDR "; else if (mmc_card_hs200(card)) diff --git a/drivers/mmc/core/host.h b/drivers/mmc/core/host.h index 48c4952512a5..ba6a80e9b360 100644 --- a/drivers/mmc/core/host.h +++ b/drivers/mmc/core/host.h @@ -89,5 +89,9 @@ static inline bool mmc_card_sd_express(struct mmc_host *host) host->ios.timing == MMC_TIMING_SD_EXP_1_2V; } +static inline bool mmc_card_uhs2(struct mmc_host *host) +{ + return host->ios.timing == MMC_TIMING_SD_UHS2; +} #endif From patchwork Mon Apr 18 11:58:31 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lai Jason X-Patchwork-Id: 563246 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id E8738C433EF for ; Mon, 18 Apr 2022 11:58:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S235352AbiDRMB1 (ORCPT ); Mon, 18 Apr 2022 08:01:27 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59578 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235447AbiDRMB0 (ORCPT ); Mon, 18 Apr 2022 08:01:26 -0400 Received: from mail-pj1-x102c.google.com (mail-pj1-x102c.google.com [IPv6:2607:f8b0:4864:20::102c]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id CC7AD1A3B2 for ; Mon, 18 Apr 2022 04:58:47 -0700 (PDT) Received: by mail-pj1-x102c.google.com with SMTP id mp16-20020a17090b191000b001cb5efbcab6so17056161pjb.4 for ; Mon, 18 Apr 2022 04:58:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=cbBf4c8rzEVOmrNj5jgfiwGo3Iz1lKYdArVuwED2OPI=; b=TlX9oTc4d6MXvmZLjnOYZCd1bzTTV+NZIruNA2VmvENZtPBzhkpX7zCaLU137hWAbH /fkpsJBFT6NIqHEQLrUfYtnL/jD1eUU1oKpbGb2v9O5NrYok43zDfp+FL2/ITMXFxYzL xn3UNmT/UZmySBNkvkNgknfy6ZGp6N5RWEnLstEzrrFEXXLv6ta2NZ343+Q1WC5m5U0K rxpYGG8oketl4kG3/EYIzZ6uvpAwjI8EWlgT106Ndt+MqVTrJbPy23Bbtq/108MgmvAq mShuaeysKP0JB8xe6feczPb1eIhi/JRePCEqwViu6diK4HmALpx11Fk+9XA0gZbyDs16 2KVg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=cbBf4c8rzEVOmrNj5jgfiwGo3Iz1lKYdArVuwED2OPI=; b=4EaNh91pav21eC7SknlVu6P4dIAyoGHpEmk4cDawqOpLpDsYoP9Ihuuo9DUUUwHYOc +FXs0Ua0p0jxvSU9FzWFLMmeWIdunJchodJ2Nw5BuVaMroaE7eaJfByVT62QBU5A3z0N mjtao5kD3Vz/bj66OprN9mpvmXI89WJCv+dhUi7+N0v5VZW/G3KwchcfyYy+OzI+nbSH vPpId9JraYgeYXnoFy6iaJwagXxex0kcSU9NM+PJxHB8kjPZdEcPr0iw/9lrXOR9WR90 Sd5Z15RbAggqj3Qgl19r7sZJ93eD33VFZfofrKT4+Hi7X5smo3FCpI54xX6+q2srk5/F /HNg== X-Gm-Message-State: AOAM531lj22axanZ4eTS6X6VxYncIKVY/Y2YFu8f7EtCkr/EML95fbeQ SZ36W4bIVxec0J4sG6P8RNQ= X-Google-Smtp-Source: ABdhPJwWPVrPTgNVqz4UQO9aAH3S3dJMZ6kxA/NZ5pigjb4Pb+mIYnbtvIq/hWmovGpf7ZuSg9BmPg== X-Received: by 2002:a17:90b:3b43:b0:1c6:f878:ea52 with SMTP id ot3-20020a17090b3b4300b001c6f878ea52mr12679121pjb.68.1650283127359; Mon, 18 Apr 2022 04:58:47 -0700 (PDT) Received: from jason-z170xgaming7.genesyslogic.com.tw ([122.146.30.3]) by smtp.gmail.com with ESMTPSA id u206-20020a6279d7000000b00505fdc42bf9sm12409749pfc.101.2022.04.18.04.58.45 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Apr 2022 04:58:47 -0700 (PDT) From: Jason Lai To: ulf.hansson@linaro.org, takahiro.akashi@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, dlunev@chromium.org, ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw, jason.lai@genesyslogic.com.tw, jasonlai.genesyslogic@gmail.com, Tim.Hsieh@genesyslogic.com.tw Subject: [PATCH V4 4/6] mmc: core: Extend support for mmc regulators with a vqmmc2 Date: Mon, 18 Apr 2022 19:58:31 +0800 Message-Id: <20220418115833.10738-5-jasonlai.genesyslogic@gmail.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> References: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Ulf Hansson Updates in V4: - Moved the voltage defines into this patch. Update in previous version: To allow an additional external regulator to be controlled by an mmc host driver, let's add support for a vqmmc2 regulator to the mmc core. For an SD UHS-II interface the vqmmc2 regulator may correspond to the so called vdd2 supply, as described by the SD spec. Initially, only 1.8V is needed, hence limit the new helper function, mmc_regulator_set_vqmmc2() to this too. Note that, to allow for flexibility mmc host drivers need to manage the enable/disable of the vqmmc2 regulator themselves, while the regulator is looked up through the common mmc_regulator_get_supply(). Signed-off-by: Ulf Hansson --- drivers/mmc/core/regulator.c | 34 ++++++++++++++++++++++++++++++++++ include/linux/mmc/host.h | 11 +++++++++++ 2 files changed, 45 insertions(+) diff --git a/drivers/mmc/core/regulator.c b/drivers/mmc/core/regulator.c index 609201a467ef..3c189682797c 100644 --- a/drivers/mmc/core/regulator.c +++ b/drivers/mmc/core/regulator.c @@ -223,6 +223,33 @@ int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios) } EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc); +/** + * mmc_regulator_set_vqmmc2 - Set vqmmc2 as per the ios->vqmmc2_voltage + * @mmc: The mmc host to regulate + * @ios: The io bus settings + * + * Sets a new voltage level for the vqmmc2 regulator, which may correspond to + * the vdd2 regulator for an SD UHS-II interface. This function is expected to + * be called by mmc host drivers. + * + * Returns a negative error code on failure, zero if the voltage level was + * changed successfully or a positive value if the level didn't need to change. + */ +int mmc_regulator_set_vqmmc2(struct mmc_host *mmc, struct mmc_ios *ios) +{ + if (IS_ERR(mmc->supply.vqmmc2)) + return -EINVAL; + + switch (ios->vqmmc2_voltage) { + case MMC_VQMMC2_VOLTAGE_180: + return mmc_regulator_set_voltage_if_supported( + mmc->supply.vqmmc2, 1700000, 1800000, 1950000); + default: + return -EINVAL; + } +} +EXPORT_SYMBOL_GPL(mmc_regulator_set_vqmmc2); + #else static inline int mmc_regulator_get_ocrmask(struct regulator *supply) @@ -249,6 +276,7 @@ int mmc_regulator_get_supply(struct mmc_host *mmc) mmc->supply.vmmc = devm_regulator_get_optional(dev, "vmmc"); mmc->supply.vqmmc = devm_regulator_get_optional(dev, "vqmmc"); + mmc->supply.vqmmc2 = devm_regulator_get_optional(dev, "vqmmc2"); if (IS_ERR(mmc->supply.vmmc)) { if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) @@ -268,6 +296,12 @@ int mmc_regulator_get_supply(struct mmc_host *mmc) dev_dbg(dev, "No vqmmc regulator found\n"); } + if (IS_ERR(mmc->supply.vqmmc2)) { + if (PTR_ERR(mmc->supply.vqmmc2) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_dbg(dev, "No vqmmc2 regulator found\n"); + } + return 0; } EXPORT_SYMBOL_GPL(mmc_regulator_get_supply); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 765469de8650..dd073ab54c02 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -71,6 +71,9 @@ struct mmc_ios { #define MMC_SIGNAL_VOLTAGE_180 1 #define MMC_SIGNAL_VOLTAGE_120 2 + unsigned char vqmmc2_voltage; +#define MMC_VQMMC2_VOLTAGE_180 0 + unsigned char drv_type; /* driver type (A, B, C, D) */ #define MMC_SET_DRIVER_TYPE_B 0 @@ -302,6 +305,7 @@ struct mmc_pwrseq; struct mmc_supply { struct regulator *vmmc; /* Card power supply */ struct regulator *vqmmc; /* Optional Vccq supply */ + struct regulator *vqmmc2; /* Optional supply for phy */ }; struct mmc_ctx { @@ -580,6 +584,7 @@ int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, unsigned short vdd_bit); int mmc_regulator_set_vqmmc(struct mmc_host *mmc, struct mmc_ios *ios); +int mmc_regulator_set_vqmmc2(struct mmc_host *mmc, struct mmc_ios *ios); #else static inline int mmc_regulator_set_ocr(struct mmc_host *mmc, struct regulator *supply, @@ -593,6 +598,12 @@ static inline int mmc_regulator_set_vqmmc(struct mmc_host *mmc, { return -EINVAL; } + +static inline int mmc_regulator_set_vqmmc2(struct mmc_host *mmc, + struct mmc_ios *ios) +{ + return -EINVAL; +} #endif int mmc_regulator_get_supply(struct mmc_host *mmc); From patchwork Mon Apr 18 11:58:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lai Jason X-Patchwork-Id: 563735 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9A68DC433F5 for ; Mon, 18 Apr 2022 11:58:53 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237955AbiDRMBa (ORCPT ); Mon, 18 Apr 2022 08:01:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59608 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235387AbiDRMB3 (ORCPT ); Mon, 18 Apr 2022 08:01:29 -0400 Received: from mail-pg1-x52b.google.com (mail-pg1-x52b.google.com [IPv6:2607:f8b0:4864:20::52b]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 1B79F1A3B4 for ; Mon, 18 Apr 2022 04:58:50 -0700 (PDT) Received: by mail-pg1-x52b.google.com with SMTP id k62so12412002pgd.2 for ; Mon, 18 Apr 2022 04:58:50 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=OjpwjVsPeW11kzO8geE3SRLe+RBfiiKnOdm6qCHQzDs=; b=jsRYDHIGEQYzluH02dY7hXyUq4FYcfsr4d0R+WoMRajNXoseADxkODFETMQHbHPT0J rmRHLUn8AdhmJwgFbA3uXtIvf9wTIjSMmnyAYvkSfLBhB5y4GSj41TGb52oQ3jUpfjKB OY8tOsci+AsjWelUP2S90I/p2oKYNc6SiJckXi11KimnDhYwK+i3lRrzV12j24izZt/q JihJQJM4Uu7ZA4+RAZpHNGI1VQ8KtwRmyH5b5qSBF3VOXRbxhWbnn5Xo50wXOnd6jdrr DSnbMCh4tHwkcyZ0Ao7EbdqaIcdwu1Q1DLEB20fscjCvYz1PfCzwL1LVT0Iy5WCj8fi6 YQrA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=OjpwjVsPeW11kzO8geE3SRLe+RBfiiKnOdm6qCHQzDs=; b=m8sRQMYK+g4HCDe0dK90jgQonuoTJ8dFdEr9EqhL7ldK9bI9fBu9MPsL4Qk/k2pcvd psglWNLUbv4FlBzGJz62ZTeKXgeWIbL18zMP5iGtYZM51pLtGURlHuvYGO1R0USbYBig KgscjZwyPq5rvNsU96OW2BCRV1Bep2z+Rx4ywp7Le8Je8h+WrQYiE2aH42dav079IQkF WhmAElJdSMrZSnfa2VY/w4P98kis7bia85ykKXgZNt8jSRrqSt+EJouMoscFtpP3dE5k shsBcD15vy3cbBs36zp82GFBKhMUze8GiT6hFMGHQRDjfd8pbMZzidRTq0uCj7c4ce0K X74g== X-Gm-Message-State: AOAM533TZKAW3v3v2xDLCTjohznQZ0RZs30R2gT0XN6fhQcmNVI7X83v pbkr5t2vitVCQuPLvL5UhcU= X-Google-Smtp-Source: ABdhPJyrSXob1PBefPo9srHiYE0Y0wT2yLLhVLRr8LiNbDNVF9xchY48l+JF5FnxGu01wzu9pzPxFw== X-Received: by 2002:a05:6a00:22d4:b0:50a:8540:431f with SMTP id f20-20020a056a0022d400b0050a8540431fmr1474037pfj.54.1650283129496; Mon, 18 Apr 2022 04:58:49 -0700 (PDT) Received: from jason-z170xgaming7.genesyslogic.com.tw ([122.146.30.3]) by smtp.gmail.com with ESMTPSA id u206-20020a6279d7000000b00505fdc42bf9sm12409749pfc.101.2022.04.18.04.58.47 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Apr 2022 04:58:49 -0700 (PDT) From: Jason Lai To: ulf.hansson@linaro.org, takahiro.akashi@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, dlunev@chromium.org, ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw, jason.lai@genesyslogic.com.tw, jasonlai.genesyslogic@gmail.com, Tim.Hsieh@genesyslogic.com.tw Subject: [PATCH V4 5/6] mmc: core: Add definitions for SD UHS-II cards Date: Mon, 18 Apr 2022 19:58:32 +0800 Message-Id: <20220418115833.10738-6-jasonlai.genesyslogic@gmail.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> References: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Jason Lai Add UHS-II specific data structures for commands and defines for registers, as described in Part 1 UHS-II Addendum Version 1.01. UHS-II related definitions are listed below: 1. UHS-II card capability: sd_uhs2_caps{} 2. UHS-II configuration: sd_uhs2_config{} 3. UHS-II Command structure: uhs2_command{} 4. UHS-II register I/O address and register field definitions: sd_uhs2.h Signed-off-by: Jason Lai Signed-off-by: Ulf Hansson --- include/linux/mmc/card.h | 42 +++++- include/linux/mmc/core.h | 13 ++ include/linux/mmc/host.h | 55 +++++++- include/linux/mmc/sd_uhs2.h | 263 ++++++++++++++++++++++++++++++++++++ 4 files changed, 371 insertions(+), 2 deletions(-) create mode 100644 include/linux/mmc/sd_uhs2.h diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 610577d531c3..530add47e9c1 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -190,6 +190,13 @@ struct sd_switch_caps { #define SD_MAX_CURRENT_400 (1 << SD_SET_CURRENT_LIMIT_400) #define SD_MAX_CURRENT_600 (1 << SD_SET_CURRENT_LIMIT_600) #define SD_MAX_CURRENT_800 (1 << SD_SET_CURRENT_LIMIT_800) + unsigned int sd4_curr_limit; +#define SD4_SET_POWER_LIMIT_0_72W 0 +#define SD4_SET_POWER_LIMIT_1_44W 1 +#define SD4_SET_POWER_LIMIT_2_16W 2 +#define SD4_SET_POWER_LIMIT_2_88W 3 +#define SD4_SET_POWER_LIMIT_1_80W 4 +#define SD4_SET_POWER_NO_CHANGE (-1) }; struct sd_ext_reg { @@ -213,7 +220,35 @@ struct sd_ext_reg { struct sd_uhs2_config { u32 node_id; - /* TODO: Extend with more register configs. */ + + u32 dap; + u32 gap; + u32 n_fcu; + u32 maxblk_len; + u8 n_lanes; + u8 dadr_len; + u8 app_type; + u8 phy_minor_rev; + u8 phy_major_rev; + u8 can_hibernate; + u8 n_lss_sync; + u8 n_lss_dir; + u8 link_minor_rev; + u8 link_major_rev; + u8 dev_type; + u8 n_data_gap; + + u32 n_fcu_set; + u32 maxblk_len_set; + u8 n_lanes_set; + u8 speed_range_set; + u8 n_lss_sync_set; + u8 n_lss_dir_set; + u8 n_data_gap_set; + u8 pwrctrl_mode_set; + u8 max_retry_set; + + u8 cfg_complete; }; struct sdio_cccr { @@ -321,6 +356,9 @@ struct mmc_card { struct sd_ext_reg ext_perf; /* SD extension reg for PERF */ struct sd_uhs2_config uhs2_config; /* SD UHS-II config */ + u8 uhs2_state; /* SD UHS-II states */ +#define MMC_UHS2_INITIALIZED BIT(1) +#define MMC_UHS2_SPEED_B BIT(2) unsigned int sdio_funcs; /* number of SDIO functions */ atomic_t sdio_funcs_probed; /* number of probed SDIO funcs */ @@ -356,4 +394,6 @@ bool mmc_card_is_blockaddr(struct mmc_card *card); #define mmc_card_sd(c) ((c)->type == MMC_TYPE_SD) #define mmc_card_sdio(c) ((c)->type == MMC_TYPE_SDIO) +#define mmc_card_can_poweroff_notify(c) ((c)->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY) + #endif /* LINUX_MMC_CARD_H */ diff --git a/include/linux/mmc/core.h b/include/linux/mmc/core.h index 71101d1ec825..f0154ecb39f9 100644 --- a/include/linux/mmc/core.h +++ b/include/linux/mmc/core.h @@ -23,6 +23,14 @@ enum mmc_blk_status { MMC_BLK_NEW_REQUEST, }; +struct uhs2_command { + u16 header; + u16 arg; + __be32 *payload; + u32 payload_len; + u32 packet_len; +}; + struct mmc_command { u32 opcode; u32 arg; @@ -109,6 +117,11 @@ struct mmc_command { unsigned int busy_timeout; /* busy detect timeout in ms */ struct mmc_data *data; /* data segment associated with cmd */ struct mmc_request *mrq; /* associated request */ + + struct uhs2_command *uhs2_cmd; /* UHS2 command */ + u8 *uhs2_resp; /* UHS2 native cmd resp */ + u8 uhs2_resp_len; /* UHS2 native cmd resp len */ + u8 uhs2_tmode0_flag; /* UHS2 transfer mode flag */ }; struct mmc_data { diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index dd073ab54c02..116f71415d52 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -96,7 +96,48 @@ struct mmc_clk_phase_map { }; struct sd_uhs2_caps { - /* TODO: Add UHS-II capabilities for the host. */ + u32 dap; + u32 gap; + u32 group_desc; + u32 maxblk_len; + u32 n_fcu; + u8 n_lanes; + u8 addr64; + u8 card_type; + u8 phy_rev; + u8 speed_range; + u8 can_hibernate; + u8 n_lss_sync; + u8 n_lss_dir; + u8 link_rev; + u8 host_type; + u8 n_data_gap; + + u32 maxblk_len_set; + u32 n_fcu_set; + u8 n_lanes_set; + u8 n_lss_sync_set; + u8 n_lss_dir_set; + u8 n_data_gap_set; + u8 max_retry_set; +}; + +struct sd_uhs2_ios { + bool is_2L_HD_mode; + bool is_APP_CMD; + unsigned int power_delay_ms; /* waiting for stable power */ +}; + +enum sd_uhs2_operation { + UHS2_PHY_INIT = 0, + UHS2_SET_CONFIG, + UHS2_ENABLE_INT, + UHS2_DISABLE_INT, + UHS2_ENABLE_CLK, + UHS2_DISABLE_CLK, + UHS2_CHECK_DORMANT, + UHS2_SET_SPEED_B, + UHS2_POST_ATTACH_SD, }; struct mmc_host; @@ -212,6 +253,14 @@ struct mmc_host_ops { /* Initialize an SD express card, mandatory for MMC_CAP2_SD_EXP. */ int (*init_sd_express)(struct mmc_host *host, struct mmc_ios *ios); + + /* + * The uhs2_control callback is used to execute SD UHS-II specific + * operations. It's mandatory to implement for hosts that supports the + * SD UHS-II interface (MMC_CAP2_SD_UHS2). Expected return values are a + * negative errno in case of a failure or zero for success. + */ + int (*uhs2_control)(struct mmc_host *host, enum sd_uhs2_operation op); }; struct mmc_cqe_ops { @@ -425,6 +474,7 @@ struct mmc_host { #define MMC_CAP2_ALT_GPT_TEGRA (1 << 28) /* Host with eMMC that has GPT entry at a non-standard location */ struct sd_uhs2_caps uhs2_caps; /* Host UHS-II capabilities */ + struct sd_uhs2_ios uhs2_ios; /* Host UHS-II capabilities */ int fixed_drv_type; /* fixed driver type for non-removable media */ @@ -669,4 +719,7 @@ int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_send_abort_tuning(struct mmc_host *host, u32 opcode); int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd); +#define mmc_uhs2_2L_HD_mode(h) ((h)->uhs2_ios.is_2L_HD_mode) +#define mmc_uhs2_APP_cmd(h) ((h)->uhs2_ios.is_APP_CMD) + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/sd_uhs2.h b/include/linux/mmc/sd_uhs2.h new file mode 100644 index 000000000000..8fcf702cf4a5 --- /dev/null +++ b/include/linux/mmc/sd_uhs2.h @@ -0,0 +1,263 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Header file for UHS-II packets, Host Controller registers and I/O + * accessors. + * + * Copyright (C) 2014 Intel Corp, All Rights Reserved. + */ +#ifndef LINUX_MMC_UHS2_H +#define LINUX_MMC_UHS2_H + +/* LINK Layer definition */ +/* + * UHS2 Header: + * Refer to UHS-II Addendum Version 1.02 Figure 5-2, the format of CCMD Header is described below: + * bit [3:0] : DID(Destination ID = Node ID of UHS2 card) + * bit [6:4] : TYP(Packet Type) + * 000b: CCMD(Control command packet) + * 001b: DCMD(Data command packet) + * 010b: RES(Response packet) + * 011b: DATA(Data payload packet) + * 111b: MSG(Message packet) + * Others: Reserved + * bit [7] : NP(Native Packet) + * bit [10:8] : TID(Transaction ID) + * bit [11] : Reserved + * bit [15:12]: SID(Source ID 0: Node ID of Host) + * + * Broadcast CCMD issued by Host is represented as DID=SID=0. + */ +/* + * UHS2 Argument: + * Refer to UHS-II Addendum Version 1.02 Figure 6-5, the format of CCMD Argument is described below: + * bit [3:0] : MSB of IOADR + * bit [5:4] : PLEN(Payload Length) + * 00b: 0 byte + * 01b: 4 bytes + * 10b: 8 bytes + * 11b: 16 bytes + * bit [6] : Reserved + * bit [7] : R/W(Read/Write) + * 0: Control read command + * 1: Control write command + * bit [15:8] : LSB of IOADR + * + * I/O Address specifies the address of register in UHS-II I/O space accessed by CCMD. + * The unit of I/O Address is 4 Bytes. It is transmitted in MSB first, LSB last. + */ +#define UHS2_NATIVE_PACKET_POS 7 +#define UHS2_NATIVE_PACKET (1 << UHS2_NATIVE_PACKET_POS) + +#define UHS2_PACKET_TYPE_POS 4 +#define UHS2_PACKET_TYPE_CCMD (0 << UHS2_PACKET_TYPE_POS) +#define UHS2_PACKET_TYPE_DCMD (1 << UHS2_PACKET_TYPE_POS) +#define UHS2_PACKET_TYPE_RES (2 << UHS2_PACKET_TYPE_POS) +#define UHS2_PACKET_TYPE_DATA (3 << UHS2_PACKET_TYPE_POS) +#define UHS2_PACKET_TYPE_MSG (7 << UHS2_PACKET_TYPE_POS) + +#define UHS2_DEST_ID_MASK 0x0F +#define UHS2_DEST_ID 0x1 + +#define UHS2_SRC_ID_POS 12 +#define UHS2_SRC_ID_MASK 0xF000 + +#define UHS2_TRANS_ID_POS 8 +#define UHS2_TRANS_ID_MASK 0x0700 + +/* UHS2 MSG */ +#define UHS2_MSG_CTG_POS 5 +#define UHS2_MSG_CTG_LMSG 0x00 +#define UHS2_MSG_CTG_INT 0x60 +#define UHS2_MSG_CTG_AMSG 0x80 + +#define UHS2_MSG_CTG_FCREQ 0x00 +#define UHS2_MSG_CTG_FCRDY 0x01 +#define UHS2_MSG_CTG_STAT 0x02 + +#define UHS2_MSG_CODE_POS 8 +#define UHS2_MSG_CODE_FC_UNRECOVER_ERR 0x8 +#define UHS2_MSG_CODE_STAT_UNRECOVER_ERR 0x8 +#define UHS2_MSG_CODE_STAT_RECOVER_ERR 0x1 + +/* TRANS Layer definition */ + +/* Native packets*/ +#define UHS2_NATIVE_CMD_RW_POS 7 +#define UHS2_NATIVE_CMD_WRITE (1 << UHS2_NATIVE_CMD_RW_POS) +#define UHS2_NATIVE_CMD_READ (0 << UHS2_NATIVE_CMD_RW_POS) + +#define UHS2_NATIVE_CMD_PLEN_POS 4 +#define UHS2_NATIVE_CMD_PLEN_4B (1 << UHS2_NATIVE_CMD_PLEN_POS) +#define UHS2_NATIVE_CMD_PLEN_8B (2 << UHS2_NATIVE_CMD_PLEN_POS) +#define UHS2_NATIVE_CMD_PLEN_16B (3 << UHS2_NATIVE_CMD_PLEN_POS) + +#define UHS2_NATIVE_CCMD_GET_MIOADR_MASK 0xF00 +#define UHS2_NATIVE_CCMD_MIOADR_MASK 0x0F + +#define UHS2_NATIVE_CCMD_LIOADR_POS 8 +#define UHS2_NATIVE_CCMD_GET_LIOADR_MASK 0x0FF + +#define UHS2_CCMD_DEV_INIT_COMPLETE_FLAG BIT(11) +#define UHS2_DEV_INIT_PAYLOAD_LEN 1 +#define UHS2_DEV_INIT_RESP_LEN 6 +#define UHS2_DEV_ENUM_PAYLOAD_LEN 1 +#define UHS2_DEV_ENUM_RESP_LEN 8 +#define UHS2_CFG_WRITE_PAYLOAD_LEN 2 +#define UHS2_CFG_WRITE_PHY_SET_RESP_LEN 4 +#define UHS2_CFG_WRITE_GENERIC_SET_RESP_LEN 5 +#define UHS2_GO_DORMANT_PAYLOAD_LEN 1 + +/* + * UHS2 Argument: + * Refer to UHS-II Addendum Version 1.02 Figure 6-8, the format of DCMD Argument is described below: + * bit [3:0] : Reserved + * bit [6:3] : TMODE(Transfer Mode) + * bit 3: DAM(Data Access Mode) + * bit 4: TLUM(TLEN Unit Mode) + * bit 5: LM(Length Mode) + * bit 6: DM(Duplex Mode) + * bit [7] : R/W(Read/Write) + * 0: Control read command + * 1: Control write command + * bit [15:8] : Reserved + * + * I/O Address specifies the address of register in UHS-II I/O space accessed by CCMD. + * The unit of I/O Address is 4 Bytes. It is transmitted in MSB first, LSB last. + */ +#define UHS2_DCMD_DM_POS 6 +#define UHS2_DCMD_2L_HD_MODE (1 << UHS2_DCMD_DM_POS) +#define UHS2_DCMD_LM_POS 5 +#define UHS2_DCMD_LM_TLEN_EXIST (1 << UHS2_DCMD_LM_POS) +#define UHS2_DCMD_TLUM_POS 4 +#define UHS2_DCMD_TLUM_BYTE_MODE (1 << UHS2_DCMD_TLUM_POS) +#define UHS2_NATIVE_DCMD_DAM_POS 3 +#define UHS2_NATIVE_DCMD_DAM_IO (1 << UHS2_NATIVE_DCMD_DAM_POS) + +/* + * Per UHS2 spec, DCMD payload should be MSB first. There may be + * two types of data be assembled to MSB: + * 1. TLEN: Input block size for single read/write and number of blocks + * for multiple read/write to calculate TLEN as MSB first per spec. + * 2. SD command argument. + */ +static inline __be32 uhs2_dcmd_convert_msb(u32 input) +{ + u32 ret = 0; + + ret = ((input & 0xFF) << 24) | + (((input >> 8) & 0xFF) << 16) | + (((input >> 16) & 0xFF) << 8) | + ((input >> 24) & 0xFF); + return cpu_to_be32(ret); +} + +#define UHS2_RES_NACK_POS 7 +#define UHS2_RES_NACK_MASK (0x1 << UHS2_RES_NACK_POS) + +#define UHS2_RES_ECODE_POS 4 +#define UHS2_RES_ECODE_MASK 0x7 +#define UHS2_RES_ECODE_COND 1 +#define UHS2_RES_ECODE_ARG 2 +#define UHS2_RES_ECODE_GEN 3 + +/* IOADR of device registers */ +#define UHS2_IOADR_GENERIC_CAPS 0x00 +#define UHS2_IOADR_PHY_CAPS 0x02 +#define UHS2_IOADR_LINK_CAPS 0x04 +#define UHS2_IOADR_RSV_CAPS 0x06 +#define UHS2_IOADR_GENERIC_SETTINGS 0x08 +#define UHS2_IOADR_PHY_SETTINGS 0x0A +#define UHS2_IOADR_LINK_SETTINGS 0x0C +#define UHS2_IOADR_PRESET 0x40 + +/* SD application packets */ +#define UHS2_SD_CMD_INDEX_POS 8 + +#define UHS2_SD_CMD_APP_POS 14 +#define UHS2_SD_CMD_APP (1 << UHS2_SD_CMD_APP_POS) + +/* UHS-II Device Registers */ +#define UHS2_DEV_CONFIG_REG 0x000 + +/* General Caps and Settings registers */ +#define UHS2_DEV_CONFIG_GEN_CAPS (UHS2_DEV_CONFIG_REG + 0x000) +#define UHS2_DEV_CONFIG_N_LANES_POS 8 +#define UHS2_DEV_CONFIG_N_LANES_MASK 0x3F +#define UHS2_DEV_CONFIG_2L_HD_FD 0x1 +#define UHS2_DEV_CONFIG_2D1U_FD 0x2 +#define UHS2_DEV_CONFIG_1D2U_FD 0x4 +#define UHS2_DEV_CONFIG_2D2U_FD 0x8 +#define UHS2_DEV_CONFIG_DADR_POS 14 +#define UHS2_DEV_CONFIG_DADR_MASK 0x1 +#define UHS2_DEV_CONFIG_APP_POS 16 +#define UHS2_DEV_CONFIG_APP_MASK 0xFF +#define UHS2_DEV_CONFIG_APP_SD_MEM 0x1 + +#define UHS2_DEV_CONFIG_GEN_SET (UHS2_DEV_CONFIG_REG + 0x008) +#define UHS2_DEV_CONFIG_GEN_SET_N_LANES_POS 8 +#define UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD 0x0 +#define UHS2_DEV_CONFIG_GEN_SET_2D1U_FD 0x2 +#define UHS2_DEV_CONFIG_GEN_SET_1D2U_FD 0x3 +#define UHS2_DEV_CONFIG_GEN_SET_2D2U_FD 0x4 +#define UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE BIT(31) + +/* PHY Caps and Settings registers */ +#define UHS2_DEV_CONFIG_PHY_CAPS (UHS2_DEV_CONFIG_REG + 0x002) +#define UHS2_DEV_CONFIG_PHY_MINOR_MASK 0xF +#define UHS2_DEV_CONFIG_PHY_MAJOR_POS 4 +#define UHS2_DEV_CONFIG_PHY_MAJOR_MASK 0x3 +#define UHS2_DEV_CONFIG_CAN_HIBER_POS 15 +#define UHS2_DEV_CONFIG_CAN_HIBER_MASK 0x1 +#define UHS2_DEV_CONFIG_PHY_CAPS1 (UHS2_DEV_CONFIG_REG + 0x003) +#define UHS2_DEV_CONFIG_N_LSS_SYN_MASK 0xF +#define UHS2_DEV_CONFIG_N_LSS_DIR_POS 4 +#define UHS2_DEV_CONFIG_N_LSS_DIR_MASK 0xF + +#define UHS2_DEV_CONFIG_PHY_SET (UHS2_DEV_CONFIG_REG + 0x00A) +#define UHS2_DEV_CONFIG_PHY_SET_SPEED_POS 6 +#define UHS2_DEV_CONFIG_PHY_SET_SPEED_A 0x0 +#define UHS2_DEV_CONFIG_PHY_SET_SPEED_B 0x1 + +/* LINK-TRAN Caps and Settings registers */ +#define UHS2_DEV_CONFIG_LINK_TRAN_CAPS (UHS2_DEV_CONFIG_REG + 0x004) +#define UHS2_DEV_CONFIG_LT_MINOR_MASK 0xF +#define UHS2_DEV_CONFIG_LT_MAJOR_POS 4 +#define UHS2_DEV_CONFIG_LT_MAJOR_MASK 0x3 +#define UHS2_DEV_CONFIG_N_FCU_POS 8 +#define UHS2_DEV_CONFIG_N_FCU_MASK 0xFF +#define UHS2_DEV_CONFIG_DEV_TYPE_POS 16 +#define UHS2_DEV_CONFIG_DEV_TYPE_MASK 0x7 +#define UHS2_DEV_CONFIG_MAX_BLK_LEN_POS 20 +#define UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK 0xFFF +#define UHS2_DEV_CONFIG_LINK_TRAN_CAPS1 (UHS2_DEV_CONFIG_REG + 0x005) +#define UHS2_DEV_CONFIG_N_DATA_GAP_MASK 0xFF + +#define UHS2_DEV_CONFIG_LINK_TRAN_SET (UHS2_DEV_CONFIG_REG + 0x00C) +#define UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN 0x200 +#define UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS 16 + +/* Preset register */ +#define UHS2_DEV_CONFIG_PRESET (UHS2_DEV_CONFIG_REG + 0x040) + +#define UHS2_DEV_INT_REG 0x100 + +#define UHS2_DEV_STATUS_REG 0x180 + +#define UHS2_DEV_CMD_REG 0x200 +#define UHS2_DEV_CMD_FULL_RESET (UHS2_DEV_CMD_REG + 0x000) +#define UHS2_DEV_CMD_GO_DORMANT_STATE (UHS2_DEV_CMD_REG + 0x001) +#define UHS2_DEV_CMD_DORMANT_HIBER BIT(7) +#define UHS2_DEV_CMD_DEVICE_INIT (UHS2_DEV_CMD_REG + 0x002) +#define UHS2_DEV_INIT_COMPLETE_FLAG BIT(11) +#define UHS2_DEV_CMD_ENUMERATE (UHS2_DEV_CMD_REG + 0x003) +#define UHS2_DEV_CMD_TRANS_ABORT (UHS2_DEV_CMD_REG + 0x004) + +#define UHS2_RCLK_MAX 52000000 +#define UHS2_RCLK_MIN 26000000 + +struct sd_uhs2_wait_active_state_data { + struct mmc_host *host; + struct mmc_command *cmd; +}; + +#endif /* LINUX_MMC_UHS2_H */ From patchwork Mon Apr 18 11:58:33 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Lai Jason X-Patchwork-Id: 563245 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 81D4DC433F5 for ; Mon, 18 Apr 2022 11:58:56 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237956AbiDRMBd (ORCPT ); Mon, 18 Apr 2022 08:01:33 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:59656 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S235387AbiDRMBd (ORCPT ); Mon, 18 Apr 2022 08:01:33 -0400 Received: from mail-pg1-x535.google.com (mail-pg1-x535.google.com [IPv6:2607:f8b0:4864:20::535]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 73BBE1A3B4 for ; Mon, 18 Apr 2022 04:58:52 -0700 (PDT) Received: by mail-pg1-x535.google.com with SMTP id r66so18507273pgr.3 for ; Mon, 18 Apr 2022 04:58:52 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20210112; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=ZYeclJnXtKCxTRPG16NEN7LIm74xUZJuwzZQlTEJuxA=; b=UMKhof8VJrnJVJ2zGjamoWBeqx6lzpZF+JY1t5Yu3BkfyC2juglm63BbZAeMFSvf9S ivLfAwpRuvwt6i8SjqY3zn9M9MfT6V2Gf+U75lv/XgULV6uFlZ4te4GMypxU7u/dyTQy YK5W/2carqE9QUG4tdstkSk28n7IrhQisr8y6mxMyRtKLXKK371uqX2vWFfI0fXQnMYY f+HBWLk/pjT5Z1mZ+6CNdtxqeDggPNZ8KiS4im2wpw1cbGFAJRupip7LxAQNMF2elpxz aQ2HXNJHnI7LSQWyCSAkznjiOqTLLw9U2zZ6T/Pk7u1gOsrBE3YWnWCm9L0FM79ZDTQS N4gA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=ZYeclJnXtKCxTRPG16NEN7LIm74xUZJuwzZQlTEJuxA=; b=PE3kHxWEDtT3zPY9cYjE3ZRf/+JNOEaSbSVSPbBUSJlo+cIercx3/r682gYMuzgCXr RIvOBlLjywJabD4he9UeCzZ8H7ato8N6r50i/EaKF5mgYW2BgK7GzESfVd1gU6tBaVF5 Sg7P1ub1Ba0OeSIN+V6nvRqhyM0PRQWbbkMe56QE86ZSN7yXHeUutyFMl+qIQoR5ownL B7jE8bMJ1tx4B4mSBoEowA0Js4lIyyFmxhqGFaZWm5nhl5FyEsPe2lotgjN2XA2CcbvM uctq2zonkcNCIZQUB7OjSLs41UCckAKQ8mtKpE45BfKF/2seHf+oMAWN1EWYqqePNPDk cHSw== X-Gm-Message-State: AOAM5306cQUjQi+fOWcj+ZAC1g9P5XVGRsCR14dWAwFpCt/TgOTnSnIt gkaHPnU2B8WZEV4uvlWhVCg= X-Google-Smtp-Source: ABdhPJxUgWylKaT2LfhoK9E/YqKBPWKUItiG6swFaMFjqvRKiCajs0F8XuWPuHTDztXpGdtMM+oRMg== X-Received: by 2002:a63:4761:0:b0:39c:f432:3d3d with SMTP id w33-20020a634761000000b0039cf4323d3dmr9854301pgk.544.1650283131686; Mon, 18 Apr 2022 04:58:51 -0700 (PDT) Received: from jason-z170xgaming7.genesyslogic.com.tw ([122.146.30.3]) by smtp.gmail.com with ESMTPSA id u206-20020a6279d7000000b00505fdc42bf9sm12409749pfc.101.2022.04.18.04.58.49 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 18 Apr 2022 04:58:51 -0700 (PDT) From: Jason Lai To: ulf.hansson@linaro.org, takahiro.akashi@linaro.org, adrian.hunter@intel.com Cc: linux-mmc@vger.kernel.org, dlunev@chromium.org, ben.chuang@genesyslogic.com.tw, greg.tu@genesyslogic.com.tw, jason.lai@genesyslogic.com.tw, jasonlai.genesyslogic@gmail.com, Tim.Hsieh@genesyslogic.com.tw Subject: [PATCH V4 6/6] mmc: core: Support UHS-II card control and access Date: Mon, 18 Apr 2022 19:58:33 +0800 Message-Id: <20220418115833.10738-7-jasonlai.genesyslogic@gmail.com> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> References: <20220418115833.10738-1-jasonlai.genesyslogic@gmail.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-mmc@vger.kernel.org From: Jason Lai Update in V4: 1. Rename sd_uhs2_prepare_cmd() into mmc_uhs2_prepare_cmd(). 2. Rename ->uhs2_host_operation() into ->uhs2_control(). 3. Declare ->uhs2_set_ios() which should be implemented in mmc/host/sdhci-uhs2.c. 4. Implement call back functions in sd_uhs2_ops. 5. Replace variables which are used as constant with constant definition. 6. Change data type of uhs2_cmd->payload from u32 to __be32 because of the use of cpu_to_be32(). 7. Add comments to explain format of UHS-II CMD Header and Argument. 8. Add comments to explain format of UHS-II CMD response. 9. Remove unnecessary debug info. 10. Use sd_uhs2_select_voltage() to replace mmc_select_voltage(). 11. Use __mmc_poll_for_busy() to replace while loop. 12. Add processing of uhs2_cmd when starting request. 13. Use macro 'mmc_card_can_poweroff_notify' to replace function "sd_can_poweroff_notify()" and put it to include/linux/mmc/card.h. 14. Embed UHS-II access functionality into the MMC request processing flow. Update in V3: UHS-II card initialization flow is divided into 2 categories: PHY & Card. Part 1 - PHY Initialization: Every host controller may need their own avtivation operation to establish LINK between controller and card. So we add a new member function(uhs2_detect_init) in struct mmc_host_ops for host controller use. Part 2 - Card Initialization: This part can be divided into 6 substeps. 1. Send UHS-II CCMD DEVICE_INIT to card. 2. Send UHS-II CCMD ENUMERATE to card. 3. Send UHS-II Native Read CCMD to obtain capabilities in CFG_REG of card. 4. Host compares capabilities of host controller and card, then write the negotiated values to Setting field in CFG_REG of card through UHS-II Native Write CCMD. 5. Switch host controller's clock to Range B if it is supported by both host controller and card. 6. Execute legacy SD initialization flow. Part 3 - Provide a function to tranaform legacy SD command packet into UHS-II SD-TRAN DCMD packet. Most of the code added above came from Intel's original patch[5]. [5] https://patchwork.kernel.org/project/linux-mmc/patch/1419672479-30852-2- git-send-email-yi.y.sun@intel.com/ Signed-off-by: Jason Lai Signed-off-by: Ulf Hansson --- drivers/mmc/core/block.c | 5 +- drivers/mmc/core/core.c | 16 + drivers/mmc/core/mmc_ops.c | 24 +- drivers/mmc/core/mmc_ops.h | 1 + drivers/mmc/core/sd.c | 11 +- drivers/mmc/core/sd.h | 3 + drivers/mmc/core/sd_ops.c | 9 + drivers/mmc/core/sd_ops.h | 3 + drivers/mmc/core/sd_uhs2.c | 1146 +++++++++++++++++++++++++++++++++++- 9 files changed, 1172 insertions(+), 46 deletions(-) diff --git a/drivers/mmc/core/block.c b/drivers/mmc/core/block.c index 4e67c1403cc9..5d320d215827 100644 --- a/drivers/mmc/core/block.c +++ b/drivers/mmc/core/block.c @@ -1582,6 +1582,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, struct request *req = mmc_queue_req_to_req(mqrq); struct mmc_blk_data *md = mq->blkdata; bool do_rel_wr, do_data_tag; + bool do_multi; + + do_multi = (card->uhs2_state & MMC_UHS2_INITIALIZED) ? true : false; mmc_blk_data_prep(mq, mqrq, disable_multi, &do_rel_wr, &do_data_tag); @@ -1592,7 +1595,7 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, brq->cmd.arg <<= 9; brq->cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; - if (brq->data.blocks > 1 || do_rel_wr) { + if (brq->data.blocks > 1 || do_rel_wr || do_multi) { /* SPI multiblock writes terminate using a special * token, not a STOP_TRANSMISSION request. */ diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index fc3d8d61a97c..6c8bac10485d 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -335,6 +335,8 @@ static int mmc_mrq_prep(struct mmc_host *host, struct mmc_request *mrq) int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) { + struct uhs2_command uhs2_cmd; + __be32 payload[4]; /* for maximum size */ int err; init_completion(&mrq->cmd_completion); @@ -352,6 +354,12 @@ int mmc_start_request(struct mmc_host *host, struct mmc_request *mrq) if (err) return err; + if (host->card->uhs2_state & MMC_UHS2_INITIALIZED) { + uhs2_cmd.payload = payload; + mrq->cmd->uhs2_cmd = &uhs2_cmd; + mmc_uhs2_prepare_cmd(host, mrq); + } + led_trigger_event(host->led, LED_FULL); __mmc_start_request(host, mrq); @@ -431,6 +439,8 @@ EXPORT_SYMBOL(mmc_wait_for_req_done); */ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) { + struct uhs2_command uhs2_cmd; + __be32 payload[4]; /* for maximum size */ int err; /* @@ -451,6 +461,12 @@ int mmc_cqe_start_req(struct mmc_host *host, struct mmc_request *mrq) if (err) goto out_err; + if (host->card->uhs2_state & MMC_UHS2_INITIALIZED) { + uhs2_cmd.payload = payload; + mrq->cmd->uhs2_cmd = &uhs2_cmd; + mmc_uhs2_prepare_cmd(host, mrq); + } + err = host->cqe_ops->cqe_request(host, mrq); if (err) goto out_err; diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 180d7e9d3400..1a0711a5104b 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -144,10 +144,24 @@ int mmc_set_dsr(struct mmc_host *host) return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES); } +int __mmc_go_idle(struct mmc_host *host) +{ + struct mmc_command cmd = {}; + int err; + + cmd.opcode = MMC_GO_IDLE_STATE; + cmd.arg = 0; + cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC; + + err = mmc_wait_for_cmd(host, &cmd, 0); + mmc_delay(1); + + return err; +} + int mmc_go_idle(struct mmc_host *host) { int err; - struct mmc_command cmd = {}; /* * Non-SPI hosts need to prevent chipselect going active during @@ -163,13 +177,7 @@ int mmc_go_idle(struct mmc_host *host) mmc_delay(1); } - cmd.opcode = MMC_GO_IDLE_STATE; - cmd.arg = 0; - cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC; - - err = mmc_wait_for_cmd(host, &cmd, 0); - - mmc_delay(1); + err = __mmc_go_idle(host); if (!mmc_host_is_spi(host)) { mmc_set_chip_select(host, MMC_CS_DONTCARE); diff --git a/drivers/mmc/core/mmc_ops.h b/drivers/mmc/core/mmc_ops.h index 09ffbc00908b..abda7492d578 100644 --- a/drivers/mmc/core/mmc_ops.h +++ b/drivers/mmc/core/mmc_ops.h @@ -25,6 +25,7 @@ struct mmc_command; int mmc_select_card(struct mmc_card *card); int mmc_deselect_cards(struct mmc_host *host); int mmc_set_dsr(struct mmc_host *host); +int __mmc_go_idle(struct mmc_host *host); int mmc_go_idle(struct mmc_host *host); int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr); int mmc_set_relative_addr(struct mmc_card *card); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 68df6b2f49cc..acd4d25e1ca6 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -200,7 +200,7 @@ static int mmc_decode_csd(struct mmc_card *card) /* * Given a 64-bit response, decode to our card SCR structure. */ -static int mmc_decode_scr(struct mmc_card *card) +int mmc_decode_scr(struct mmc_card *card) { struct sd_scr *scr = &card->scr; unsigned int scr_struct; @@ -1613,11 +1613,6 @@ static void mmc_sd_detect(struct mmc_host *host) } } -static int sd_can_poweroff_notify(struct mmc_card *card) -{ - return card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY; -} - static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy) { struct sd_busy_data *data = cb_data; @@ -1641,7 +1636,7 @@ static int sd_busy_poweroff_notify_cb(void *cb_data, bool *busy) return 0; } -static int sd_poweroff_notify(struct mmc_card *card) +int sd_poweroff_notify(struct mmc_card *card) { struct sd_busy_data cb_data; u8 *reg_buf; @@ -1689,7 +1684,7 @@ static int _mmc_sd_suspend(struct mmc_host *host) if (mmc_card_suspended(card)) goto out; - if (sd_can_poweroff_notify(card)) + if (mmc_card_can_poweroff_notify(card)) err = sd_poweroff_notify(card); else if (!mmc_host_is_spi(host)) err = mmc_deselect_cards(host); diff --git a/drivers/mmc/core/sd.h b/drivers/mmc/core/sd.h index 1af5a038bae9..b573a809a0f4 100644 --- a/drivers/mmc/core/sd.h +++ b/drivers/mmc/core/sd.h @@ -17,4 +17,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card, unsigned mmc_sd_get_max_clock(struct mmc_card *card); int mmc_sd_switch_hs(struct mmc_card *card); +/* These call back functions were also used by UHS2 sd card */ +int sd_poweroff_notify(struct mmc_card *card); + #endif diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c index ef8d1dce5af1..b708aa9438c7 100644 --- a/drivers/mmc/core/sd_ops.c +++ b/drivers/mmc/core/sd_ops.c @@ -27,6 +27,15 @@ int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card) if (WARN_ON(card && card->host != host)) return -EINVAL; + /* + * UHS2 packet has APP bit so only set APP_CMD flag here. + * Will set the APP bit when assembling UHS2 packet. + */ + if (card->uhs2_state & MMC_UHS2_INITIALIZED) { + host->uhs2_ios.is_APP_CMD = true; + return 0; + } + cmd.opcode = MMC_APP_CMD; if (card) { diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h index 3ba7b3cf4652..29c802dec988 100644 --- a/drivers/mmc/core/sd_ops.h +++ b/drivers/mmc/core/sd_ops.h @@ -11,6 +11,7 @@ #include struct mmc_card; +struct mmc_command; struct mmc_host; int mmc_app_set_bus_width(struct mmc_card *card, int width); @@ -19,10 +20,12 @@ int mmc_send_if_cond(struct mmc_host *host, u32 ocr); int mmc_send_if_cond_pcie(struct mmc_host *host, u32 ocr); int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca); int mmc_app_send_scr(struct mmc_card *card); +int mmc_decode_scr(struct mmc_card *card); int mmc_sd_switch(struct mmc_card *card, int mode, int group, u8 value, u8 *resp); int mmc_app_sd_status(struct mmc_card *card, void *ssr); int mmc_app_cmd(struct mmc_host *host, struct mmc_card *card); +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq); #endif diff --git a/drivers/mmc/core/sd_uhs2.c b/drivers/mmc/core/sd_uhs2.c index 800957f74632..52d01abc73c7 100644 --- a/drivers/mmc/core/sd_uhs2.c +++ b/drivers/mmc/core/sd_uhs2.c @@ -1,48 +1,125 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2021 Linaro Ltd - * * Author: Ulf Hansson * + * Copyright (C) 2014 Intel Corp, All Rights Reserved. + * Author: Yi Sun + * + * Copyright (C) 2020 Genesys Logic, Inc. + * Authors: Ben Chuang + * + * Copyright (C) 2020 Linaro Limited + * Author: AKASHI Takahiro + * + * Copyright (C) 2022 Genesys Logic, Inc. + * Authors: Jason Lai + * * Support for SD UHS-II cards */ #include +#include #include #include +#include +#include +#include +#include "card.h" #include "core.h" #include "bus.h" #include "sd.h" +#include "sd_ops.h" #include "mmc_ops.h" +#define UHS2_WAIT_CFG_COMPLETE_PERIOD_US (1 * 1000) /* 1ms */ +#define UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS 100 /* 100ms */ + static const unsigned int sd_uhs2_freqs[] = { 52000000, 26000000 }; +int sd_uhs2_reinit(struct mmc_host *host); -static int sd_uhs2_set_ios(struct mmc_host *host) +/* + * Internal function that does the actual ios call to the host driver, + * optionally printing some debug output. + */ +static inline int sd_uhs2_set_ios(struct mmc_host *host) { struct mmc_ios *ios = &host->ios; + pr_debug("%s: clock %uHz powermode %u Vdd %u timing %u\n", + mmc_hostname(host), ios->clock, ios->power_mode, ios->vdd, ios->timing); + return host->ops->uhs2_set_ios(host, ios); } static int sd_uhs2_power_up(struct mmc_host *host) { + int err; + + if (host->ios.power_mode == MMC_POWER_ON) + return 0; + host->ios.vdd = fls(host->ocr_avail) - 1; host->ios.clock = host->f_init; host->ios.timing = MMC_TIMING_SD_UHS2; - host->ios.power_mode = MMC_POWER_UP; + host->ios.power_mode = MMC_POWER_ON; - return sd_uhs2_set_ios(host); + err = sd_uhs2_set_ios(host); + + mmc_delay(host->uhs2_ios.power_delay_ms); + + return err; } -static void sd_uhs2_power_off(struct mmc_host *host) +static int sd_uhs2_power_off(struct mmc_host *host) { + if (host->ios.power_mode == MMC_POWER_OFF) + return 0; + host->ios.vdd = 0; host->ios.clock = 0; host->ios.timing = MMC_TIMING_LEGACY; host->ios.power_mode = MMC_POWER_OFF; - sd_uhs2_set_ios(host); + return sd_uhs2_set_ios(host); +} + +/** + * sd_uhs2_cmd_assemble() - build up UHS-II command packet which is embedded in + * mmc_command structure + * @cmd: MMC command to executed + * @uhs2_cmd: UHS2 command corresponded to MMC command + * @header: Header field of UHS-II command cxpacket + * @arg: Argument field of UHS-II command packet + * @payload: Payload field of UHS-II command packet + * @plen: Payload length + * @resp: Response buffer is allocated by caller and it is used to keep + * the response of CM-TRAN command. For SD-TRAN command, uhs2_resp + * should be null and SD-TRAN command response should be stored in + * resp of mmc_command. + * @resp_len: Response buffer length + * + * The uhs2_command structure contains message packets which are transmited/ + * received on UHS-II bus. This function fills in the contents of uhs2_command + * structure and embededs UHS2 command into mmc_command structure, which is used + * in legacy SD operation functions. + * + */ +static void sd_uhs2_cmd_assemble(struct mmc_command *cmd, + struct uhs2_command *uhs2_cmd, + u16 header, u16 arg, __be32 *payload, + u8 plen, u8 *resp, u8 resp_len) +{ + uhs2_cmd->header = header; + uhs2_cmd->arg = arg; + uhs2_cmd->payload = payload; + uhs2_cmd->payload_len = plen * sizeof(u32); + uhs2_cmd->packet_len = uhs2_cmd->payload_len + 4; + + cmd->uhs2_cmd = uhs2_cmd; + cmd->uhs2_resp = resp; + cmd->uhs2_resp_len = resp_len; } /* @@ -52,7 +129,15 @@ static void sd_uhs2_power_off(struct mmc_host *host) */ static int sd_uhs2_phy_init(struct mmc_host *host) { - return 0; + int err = 0; + + err = host->ops->uhs2_control(host, UHS2_PHY_INIT); + if (err) { + pr_err("%s: failed to initial phy for UHS-II!\n", + mmc_hostname(host)); + } + + return err; } /* @@ -61,6 +146,89 @@ static int sd_uhs2_phy_init(struct mmc_host *host) */ static int sd_uhs2_dev_init(struct mmc_host *host) { + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u32 cnt; + u32 dap, gap, resp_gap; + u16 header, arg; + __be32 payload[UHS2_DEV_INIT_PAYLOAD_LEN]; + u8 gd = 0; + u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0}; + int err; + + dap = host->uhs2_caps.dap; + gap = host->uhs2_caps.gap; + + /* + * Refer to UHS-II Addendum Version 1.02 Figure 6-21 to see DEVICE_INIT CCMD format. + * Head: + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b). + * - IOADR = CMD_BASE + 002h + * Payload: + * - bit [3:0] : GAP(Group Allocated Power) + * - bit [7:4] : GD(Group Descriptor) + * - bit [11] : Complete Flag + * - bit [15:12]: DAP(Device Allocated Power) + */ + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD; + arg = ((UHS2_DEV_CMD_DEVICE_INIT & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CMD_DEVICE_INIT >> 8); + + /* + * Refer to UHS-II Addendum Version 1.02 section 6.3.1. + * Max. time from DEVICE_INIT CCMD EOP reception on Device + * Rx to its SOP transmission on Device Tx(Tfwd_init_cmd) is + * 1 second. + */ + cmd.busy_timeout = 1000; + + /* + * Refer to UHS-II Addendum Version 1.02 section 6.2.6.3. + * When the number of the DEVICE_INIT commands is reach to + * 30 tiems, Host shall stop issuing DEVICE_INIT command + * and regard it as an error. + */ + for (cnt = 0; cnt < 30; cnt++) { + payload[0] = ((dap & 0xF) << 12) | + UHS2_DEV_INIT_COMPLETE_FLAG | + ((gd & 0xF) << 4) | + (gap & 0xF); + payload[0] = cpu_to_be32(payload[0]); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, + payload, UHS2_DEV_INIT_PAYLOAD_LEN, + resp, UHS2_DEV_INIT_RESP_LEN); + + err = mmc_wait_for_cmd(host, &cmd, 0); + + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + if (resp[3] != (UHS2_DEV_CMD_DEVICE_INIT & 0xFF)) { + pr_err("%s: DEVICE_INIT response is wrong!\n", + mmc_hostname(host)); + return -EIO; + } + + if (resp[5] & 0x8) { + host->uhs2_caps.group_desc = gd; + return 0; + } + resp_gap = resp[4] & 0x0F; + if (gap == resp_gap) + gd++; + } + if (cnt == 30) { + pr_err("%s: DEVICE_INIT fail, already 30 times!\n", + mmc_hostname(host)); + return -EIO; + } + return 0; } @@ -71,6 +239,52 @@ static int sd_uhs2_dev_init(struct mmc_host *host) */ static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id) { + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header, arg; + __be32 payload[UHS2_DEV_ENUM_PAYLOAD_LEN]; + u8 id_f = 0xF, id_l = 0x0; + u8 resp[UHS2_DEV_ENUM_RESP_LEN] = {0}; + int err; + + /* + * Refer to UHS-II Addendum Version 1.02 Figure 6-28 to see ENUMERATE CCMD format. + * Header: + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b). + * - IOADR = CMD_BASE + 003h + * Payload: + * - bit [3:0]: ID_L(Last Node ID) + * - bit [7:4]: ID_F(First Node ID) + */ + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD; + arg = ((UHS2_DEV_CMD_ENUMERATE & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CMD_ENUMERATE >> 8); + + payload[0] = (id_f << 4) | id_l; + payload[0] = cpu_to_be32(payload[0]); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_DEV_ENUM_PAYLOAD_LEN, + resp, UHS2_DEV_ENUM_RESP_LEN); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + if (resp[3] != (UHS2_DEV_CMD_ENUMERATE & 0xFF)) { + pr_err("%s: ENUMERATE response is wrong!\n", + mmc_hostname(host)); + return -EIO; + } + + id_f = (resp[4] >> 4) & 0xF; + id_l = resp[4] & 0xF; + *node_id = id_f; + return 0; } @@ -81,6 +295,181 @@ static int sd_uhs2_enum(struct mmc_host *host, u32 *node_id) */ static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card) { + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header, arg; + u32 cap; + int err; + + /* + * Use Control Read CCMD to read Generic Capability from Configuration Register. + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b). + * - IOADR = Generic Capability Register(CFG_BASE + 000h) + */ + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id; + arg = ((UHS2_DEV_CONFIG_GEN_CAPS & 0xFF) << 8) | + UHS2_NATIVE_CMD_READ | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CONFIG_GEN_CAPS >> 8); + + /* + * There is no payload because per spec, there should be + * no payload field for read CCMD. + * Plen is set in arg. Per spec, plen for read CCMD + * represents the len of read data which is assigned in payload + * of following RES (p136). + */ + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* + * Generic Capability Register: + * bit [7:0] : Reserved + * bit [13:8] : Device-Specific Number of Lanes and Functionality + * bit 8: 2L-HD + * bit 9: 2D-1U FD + * bit 10: 1D-2U FD + * bit 11: 2D-2U FD + * Others: Reserved + * bit [14] : DADR Length + * 0: 4 bytes + * 1: Reserved + * bit [23:16]: Application Type + * bit 16: 0=Non-SD memory, 1=SD memory + * bit 17: 0=Non-SDIO, 1=SDIO + * bit 18: 0=Card, 1=Embedded + * bit [63:24]: Reserved + */ + cap = cmd.resp[0]; + card->uhs2_config.n_lanes = + (cap >> UHS2_DEV_CONFIG_N_LANES_POS) & + UHS2_DEV_CONFIG_N_LANES_MASK; + card->uhs2_config.dadr_len = + (cap >> UHS2_DEV_CONFIG_DADR_POS) & + UHS2_DEV_CONFIG_DADR_MASK; + card->uhs2_config.app_type = + (cap >> UHS2_DEV_CONFIG_APP_POS) & + UHS2_DEV_CONFIG_APP_MASK; + + /* + * Use Control Read CCMD to read PHY Capability from Configuration Register. + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b). + * - IOADR = PHY Capability Register(CFG_BASE + 002h) + */ + arg = ((UHS2_DEV_CONFIG_PHY_CAPS & 0xFF) << 8) | + UHS2_NATIVE_CMD_READ | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_PHY_CAPS >> 8); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* + * PHY Capability Register: + * bit [3:0] : PHY Minor Revision + * bit [5:4] : PHY Major Revision + * bit [15] : Support Hibernate Mode + * 0: Not support Hibernate Mode + * 1: Support Hibernate Mode + * bit [31:16]: Reserved + * bit [35:32]: Device-Specific N_LSS_SYN + * bit [39:36]: Device-Specific N_LSS_DIR + * bit [63:40]: Reserved + */ + cap = cmd.resp[0]; + card->uhs2_config.phy_minor_rev = + cap & UHS2_DEV_CONFIG_PHY_MINOR_MASK; + card->uhs2_config.phy_major_rev = + (cap >> UHS2_DEV_CONFIG_PHY_MAJOR_POS) & + UHS2_DEV_CONFIG_PHY_MAJOR_MASK; + card->uhs2_config.can_hibernate = + (cap >> UHS2_DEV_CONFIG_CAN_HIBER_POS) & + UHS2_DEV_CONFIG_CAN_HIBER_MASK; + + cap = cmd.resp[1]; + card->uhs2_config.n_lss_sync = + cap & UHS2_DEV_CONFIG_N_LSS_SYN_MASK; + card->uhs2_config.n_lss_dir = + (cap >> UHS2_DEV_CONFIG_N_LSS_DIR_POS) & + UHS2_DEV_CONFIG_N_LSS_DIR_MASK; + if (card->uhs2_config.n_lss_sync == 0) + card->uhs2_config.n_lss_sync = 16 << 2; + else + card->uhs2_config.n_lss_sync <<= 2; + + if (card->uhs2_config.n_lss_dir == 0) + card->uhs2_config.n_lss_dir = 16 << 3; + else + card->uhs2_config.n_lss_dir <<= 3; + + /* + * Use Control Read CCMD to read LINK/TRAN Capability from Configuration Register. + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b). + * - IOADR = LINK/TRAN Capability Register(CFG_BASE + 004h) + */ + arg = ((UHS2_DEV_CONFIG_LINK_TRAN_CAPS & 0xFF) << 8) | + UHS2_NATIVE_CMD_READ | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_LINK_TRAN_CAPS >> 8); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* + * LINK/TRAN Capability Register: + * bit [3:0] : LINK_TRAN Minor Revision + * bit [5:4] : LINK/TRAN Major Revision + * bit [7:6] : Reserved + * bit [15:8] : Device-Specific N_FCU + * bit [18:16]: Device Type + * 001b=Host + * 010b=Device + * 011b=Reserved for CMD issuable Device + * bit [19] : Reserved + * bit [31:20]: Device-Specific MAX_BLKLEN + * bit [39:32]: Device-Specific N_DATA_GAP + * bit [63:40]: Reserved + */ + cap = cmd.resp[0]; + card->uhs2_config.link_minor_rev = + cap & UHS2_DEV_CONFIG_LT_MINOR_MASK; + card->uhs2_config.link_major_rev = + (cap >> UHS2_DEV_CONFIG_LT_MAJOR_POS) & + UHS2_DEV_CONFIG_LT_MAJOR_MASK; + card->uhs2_config.n_fcu = + (cap >> UHS2_DEV_CONFIG_N_FCU_POS) & + UHS2_DEV_CONFIG_N_FCU_MASK; + card->uhs2_config.dev_type = + (cap >> UHS2_DEV_CONFIG_DEV_TYPE_POS) & + UHS2_DEV_CONFIG_DEV_TYPE_MASK; + card->uhs2_config.maxblk_len = + (cap >> UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) & + UHS2_DEV_CONFIG_MAX_BLK_LEN_MASK; + + cap = cmd.resp[1]; + card->uhs2_config.n_data_gap = + cap & UHS2_DEV_CONFIG_N_DATA_GAP_MASK; + if (card->uhs2_config.n_fcu == 0) + card->uhs2_config.n_fcu = 256; + return 0; } @@ -95,9 +484,402 @@ static int sd_uhs2_config_read(struct mmc_host *host, struct mmc_card *card) */ static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card) { + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header, arg; + __be32 payload[UHS2_CFG_WRITE_PAYLOAD_LEN]; + u8 nMinDataGap; + int err; + u8 resp[5] = {0}; + + /* + * Use Control Write CCMD to set Generic Setting in Configuration Register. + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b). + * - IOADR = Generic Setting Register(CFG_BASE + 008h) + * - Payload = New contents to be written to Generic Setting Register + */ + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | card->uhs2_config.node_id; + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_GEN_SET >> 8); + + if (card->uhs2_config.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD && + host->uhs2_caps.n_lanes == UHS2_DEV_CONFIG_2L_HD_FD) { + /* Support HD */ + host->uhs2_ios.is_2L_HD_mode = true; + nMinDataGap = 1; + } else { + /* Only support 2L-FD so far */ + host->uhs2_ios.is_2L_HD_mode = false; + nMinDataGap = 3; + } + + /* + * Most UHS-II cards only support FD and 2L-HD mode. Other lane numbers + * defined in UHS-II addendem Ver1.01 are optional. + */ + host->uhs2_caps.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD; + card->uhs2_config.n_lanes_set = UHS2_DEV_CONFIG_GEN_SET_2L_FD_HD; + + payload[0] = card->uhs2_config.n_lanes_set << UHS2_DEV_CONFIG_N_LANES_POS; + payload[1] = 0; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + /* + * There is no payload because per spec, there should be + * no payload field for read CCMD. + * Plen is set in arg. Per spec, plen for read CCMD + * represents the len of read data which is assigned in payload + * of following RES (p136). + */ + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN, + NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* + * Use Control Write CCMD to set PHY Setting in Configuration Register. + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b). + * - IOADR = PHY Setting Register(CFG_BASE + 00Ah) + * - Payload = New contents to be written to PHY Setting Register + */ + arg = ((UHS2_DEV_CONFIG_PHY_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_PHY_SET >> 8); + + if (host->uhs2_caps.speed_range == UHS2_DEV_CONFIG_PHY_SET_SPEED_B) { + card->uhs2_state |= MMC_UHS2_SPEED_B; + card->uhs2_config.speed_range_set = + UHS2_DEV_CONFIG_PHY_SET_SPEED_B; + } else { + card->uhs2_config.speed_range_set = UHS2_DEV_CONFIG_PHY_SET_SPEED_A; + card->uhs2_state &= ~MMC_UHS2_SPEED_B; + } + + payload[0] = card->uhs2_config.speed_range_set << UHS2_DEV_CONFIG_PHY_SET_SPEED_POS; + + card->uhs2_config.n_lss_sync_set = (max(card->uhs2_config.n_lss_sync, + host->uhs2_caps.n_lss_sync) >> 2) & + UHS2_DEV_CONFIG_N_LSS_SYN_MASK; + host->uhs2_caps.n_lss_sync_set = card->uhs2_config.n_lss_sync_set; + + card->uhs2_config.n_lss_dir_set = (max(card->uhs2_config.n_lss_dir, + host->uhs2_caps.n_lss_dir) >> 3) & + UHS2_DEV_CONFIG_N_LSS_DIR_MASK; + host->uhs2_caps.n_lss_dir_set = card->uhs2_config.n_lss_dir_set; + + payload[1] = (card->uhs2_config.n_lss_dir_set << UHS2_DEV_CONFIG_N_LSS_DIR_POS) | + card->uhs2_config.n_lss_sync_set; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + memset(resp, 0, sizeof(resp)); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN, + resp, UHS2_CFG_WRITE_PHY_SET_RESP_LEN); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + if ((resp[2] & 0x80)) { + pr_err("%s: %s: UHS2 CMD not accepted, resp= 0x%x!\n", + mmc_hostname(host), __func__, resp[2]); + return -EIO; + } + + /* + * Use Control Write CCMD to set LINK/TRAN Setting in Configuration Register. + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b). + * - IOADR = LINK/TRAN Setting Register(CFG_BASE + 00Ch) + * - Payload = New contents to be written to LINK/TRAN Setting Register + */ + arg = ((UHS2_DEV_CONFIG_LINK_TRAN_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_LINK_TRAN_SET >> 8); + + if (card->uhs2_config.app_type == UHS2_DEV_CONFIG_APP_SD_MEM) + card->uhs2_config.maxblk_len_set = UHS2_DEV_CONFIG_LT_SET_MAX_BLK_LEN; + else + card->uhs2_config.maxblk_len_set = min(card->uhs2_config.maxblk_len, + host->uhs2_caps.maxblk_len); + host->uhs2_caps.maxblk_len_set = card->uhs2_config.maxblk_len_set; + + card->uhs2_config.n_fcu_set = min(card->uhs2_config.n_fcu, host->uhs2_caps.n_fcu); + host->uhs2_caps.n_fcu_set = card->uhs2_config.n_fcu_set; + + card->uhs2_config.n_data_gap_set = max(nMinDataGap, card->uhs2_config.n_data_gap); + host->uhs2_caps.n_data_gap_set = card->uhs2_config.n_data_gap_set; + + host->uhs2_caps.max_retry_set = 3; + card->uhs2_config.max_retry_set = host->uhs2_caps.max_retry_set; + + payload[0] = (card->uhs2_config.maxblk_len_set << UHS2_DEV_CONFIG_MAX_BLK_LEN_POS) | + (card->uhs2_config.max_retry_set << UHS2_DEV_CONFIG_LT_SET_MAX_RETRY_POS) | + (card->uhs2_config.n_fcu_set << UHS2_DEV_CONFIG_N_FCU_POS); + payload[1] = card->uhs2_config.n_data_gap_set; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN, + NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* + * Use Control Write CCMD to set Config Completion(payload bit 63) in Generic Setting + * Register. + * Header: + * - Control Write(R/W=1) with 8-Byte payload(PLEN=10b). + * - IOADR = PGeneric Setting Register(CFG_BASE + 008h) + * Payload: + * - bit [63]: Config Completion + * + * DLSM transits to Active state immediately when Config Completion is set to 1. + */ + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_GEN_SET >> 8); + + payload[0] = 0; + payload[1] = UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE; + payload[0] = cpu_to_be32(payload[0]); + payload[1] = cpu_to_be32(payload[1]); + + memset(resp, 0, sizeof(resp)); + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_CFG_WRITE_PAYLOAD_LEN, + resp, UHS2_CFG_WRITE_GENERIC_SET_RESP_LEN); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* Set host Config Setting registers */ + err = host->ops->uhs2_control(host, UHS2_SET_CONFIG); + if (err) { + pr_err("%s: %s: UHS2 SET_CONFIG fail!\n", mmc_hostname(host), __func__); + return err; + } + + return 0; +} + +static int sd_uhs2_go_dormant(struct mmc_host *host, u32 node_id) +{ + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header, arg; + __be32 payload[1]; + int err; + + /* Disable Normal INT */ + err = host->ops->uhs2_control(host, UHS2_DISABLE_INT); + if (err) { + pr_err("%s: %s: UHS2 DISABLE_INT fail!\n", + mmc_hostname(host), __func__); + return err; + } + + /* + * Refer to UHS-II Addendum Version 1.02 Figure 6-17 to see GO_DORMANT_STATE CCMD format. + * Header: + * - Control Write(R/W=1) with 4-Byte payload(PLEN=01b). + * - IOADR = CMD_BASE + 001h + * Payload: + * - bit [7]: HBR(Entry to Hibernate Mode) + * 1: Host intends to enter Hibernate mode during Dormant state. + * The default setting is 0 because hibernate is currently not supported. + */ + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id; + arg = ((UHS2_DEV_CMD_GO_DORMANT_STATE & 0xFF) << 8) | + UHS2_NATIVE_CMD_WRITE | + UHS2_NATIVE_CMD_PLEN_4B | + (UHS2_DEV_CMD_GO_DORMANT_STATE >> 8); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, payload, UHS2_GO_DORMANT_PAYLOAD_LEN, + NULL, 0); + + err = mmc_wait_for_cmd(host, &cmd, 0); + if (err) { + pr_err("%s: %s: UHS2 CMD send fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* Check Dormant State in Present */ + err = host->ops->uhs2_control(host, UHS2_CHECK_DORMANT); + if (err) + return err; + + /* Disable UHS2 card clock */ + err = host->ops->uhs2_control(host, UHS2_DISABLE_CLK); + if (err) + return err; + + /* Restore sd clock */ + mmc_delay(5); + err = host->ops->uhs2_control(host, UHS2_ENABLE_CLK); + if (err) + return err; + + /* Enable Normal INT */ + err = host->ops->uhs2_control(host, UHS2_ENABLE_INT); + if (err) + return err; + + return 0; +} + +static int __sd_uhs2_wait_active_state_cb(void *cb_data, bool *busy) +{ + struct sd_uhs2_wait_active_state_data *data = cb_data; + struct mmc_host *host = data->host; + struct mmc_command *cmd = data->cmd; + int err; + + err = mmc_wait_for_cmd(host, cmd, 0); + if (err) + return err; + + if (cmd->resp[1] & UHS2_DEV_CONFIG_GEN_SET_CFG_COMPLETE) + *busy = false; + else + *busy = true; + + return 0; +} + +static int sd_uhs2_change_speed(struct mmc_host *host, u32 node_id) +{ + struct mmc_command cmd = {0}; + struct uhs2_command uhs2_cmd = {}; + u16 header, arg; + int err; + struct sd_uhs2_wait_active_state_data cb_data = { + .host = host, + .cmd = &cmd + }; + + /* Change Speed Range at controller side. */ + err = host->ops->uhs2_control(host, UHS2_SET_SPEED_B); + if (err) { + pr_err("%s: %s: UHS2 SET_SPEED fail!\n", mmc_hostname(host), __func__); + return err; + } + + err = sd_uhs2_go_dormant(host, node_id); + if (err) { + pr_err("%s: %s: UHS2 GO_DORMANT_STATE fail, err= 0x%x!\n", + mmc_hostname(host), __func__, err); + return err; + } + + /* + * Use Control Read CCMD to check Config Completion(bit 63) in Generic Setting Register. + * - Control Read(R/W=0) with 8-Byte payload(PLEN=10b). + * - IOADR = Generic Setting Register(CFG_BASE + 008h) + * + * When UHS-II card been switched to new speed mode, it will set Config Completion to 1. + */ + header = UHS2_NATIVE_PACKET | UHS2_PACKET_TYPE_CCMD | node_id; + arg = ((UHS2_DEV_CONFIG_GEN_SET & 0xFF) << 8) | + UHS2_NATIVE_CMD_READ | + UHS2_NATIVE_CMD_PLEN_8B | + (UHS2_DEV_CONFIG_GEN_SET >> 8); + + sd_uhs2_cmd_assemble(&cmd, &uhs2_cmd, header, arg, NULL, 0, NULL, 0); + err = __mmc_poll_for_busy(host, UHS2_WAIT_CFG_COMPLETE_PERIOD_US, + UHS2_WAIT_CFG_COMPLETE_TIMEOUT_MS, + &__sd_uhs2_wait_active_state_cb, &cb_data); + if (err) { + pr_err("%s: %s: Not switch to Active in 100 ms\n", mmc_hostname(host), __func__); + return err; + } + return 0; } +static int sd_uhs2_get_ro(struct mmc_host *host) +{ + /* + * Some systems don't feature a write-protect pin and don't need one. + * E.g. because they only have micro-SD card slot. For those systems + * assume that the SD card is always read-write. + */ + if (host->caps2 & MMC_CAP2_NO_WRITE_PROTECT) + return 0; + + if (!host->ops->get_ro) + return -1; + + return host->ops->get_ro(host); +} + +/* + * Mask off any voltages we don't support and select + * the lowest voltage + */ +u32 sd_uhs2_select_voltage(struct mmc_host *host, u32 ocr) +{ + int bit; + int err; + + /* + * Sanity check the voltages that the card claims to + * support. + */ + if (ocr & 0x7F) { + dev_warn(mmc_dev(host), "card claims to support voltages below defined range\n"); + ocr &= ~0x7F; + } + + ocr &= host->ocr_avail; + if (!ocr) { + dev_warn(mmc_dev(host), "no support for card's volts\n"); + return 0; + } + + if (host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) { + bit = ffs(ocr) - 1; + ocr &= 3 << bit; + /* Power cycle */ + err = sd_uhs2_power_off(host); + if (err) + return 0; + err = sd_uhs2_reinit(host); + if (err) + return 0; + } else { + bit = fls(ocr) - 1; + ocr &= 3 << bit; + if (bit != host->ios.vdd) + dev_warn(mmc_dev(host), "exceeding card's volts\n"); + } + + return ocr; +} + /* * Initialize the UHS-II card through the SD-TRAN transport layer. This enables * commands/requests to be backwards compatible through the legacy SD protocol. @@ -107,14 +889,139 @@ static int sd_uhs2_config_write(struct mmc_host *host, struct mmc_card *card) */ static int sd_uhs2_legacy_init(struct mmc_host *host, struct mmc_card *card) { + int err; + u32 cid[4]; + u32 ocr; + u32 rocr; + u8 status[64]; + int ro; + + /* Send CMD0 to reset SD card */ + err = __mmc_go_idle(host); + if (err) + return err; + + mmc_delay(1); + + /* Send CMD8 to communicate SD interface operation condition */ + err = mmc_send_if_cond(host, host->ocr_avail); + if (err) { + dev_warn(mmc_dev(host), "CMD8 error\n"); + return err; + } + + /* + * Probe SD card working voltage. + */ + err = mmc_send_app_op_cond(host, 0, &ocr); + if (err) + return err; + + card->ocr = ocr; + + /* + * Some SD cards claims an out of spec VDD voltage range. Let's treat + * these bits as being in-valid and especially also bit7. + */ + ocr &= ~0x7FFF; + ocr |= (SD_OCR_CCS | SD_OCR_XPC); + rocr = sd_uhs2_select_voltage(host, ocr); + + /* + * Some cards have zero value of rocr in UHS-II mode. Assign host's + * ocr value to rocr. + */ + if (!rocr) + rocr = host->ocr_avail; + + /* Wait SD power on ready */ + ocr = rocr; + err = mmc_send_app_op_cond(host, ocr, &rocr); + if (err) + return err; + + err = mmc_send_cid(host, cid); + if (err) + return err; + + memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); + + /* + * For native busses: get card RCA and quit open drain mode. + */ + err = mmc_send_relative_addr(host, &card->rca); + if (err) + return err; + + err = mmc_sd_get_csd(card); + if (err) + return err; + + /* + * Select card, as all following commands rely on that. + */ + err = mmc_select_card(card); + if (err) + return err; + + /* + * Fetch SCR from card. + */ + err = mmc_app_send_scr(card); + if (err) + return err; + + err = mmc_decode_scr(card); + if (err) + return err; + + /* + * Switch to high power consumption mode. + * Even switch failed, sd card can still work at lower power consumption mode, but + * performance will be lower than high power consumption mode. + */ + if (!(card->csd.cmdclass & CCC_SWITCH)) { + pr_warn("%s: card lacks mandatory switch function, performance might suffer\n", + mmc_hostname(card->host)); + } else { + /* send CMD6 to set Maximum Power Consumption to get better performance */ + err = mmc_sd_switch(card, 0, 3, SD4_SET_POWER_LIMIT_1_80W, status); + if (!err) + err = mmc_sd_switch(card, 1, 3, SD4_SET_POWER_LIMIT_1_80W, status); + + err = 0; + } + + /* + * Check if read-only switch is active. + */ + ro = sd_uhs2_get_ro(host); + if (ro < 0) { + pr_warn("%s: host does not support read-only switch, assuming write-enable\n", + mmc_hostname(host)); + } else if (ro > 0) { + mmc_card_set_readonly(card); + } + + /* + * NOTE: + * Should we read Externsion Register to check power notification feature here? + */ + return 0; } +static void sd_uhs2_remove(struct mmc_host *host) +{ + mmc_remove_card(host->card); + host->card = NULL; +} + /* * Allocate the data structure for the mmc_card and run the UHS-II specific * initialization sequence. */ -static int sd_uhs2_init_card(struct mmc_host *host) +static int sd_uhs2_init_card(struct mmc_host *host, struct mmc_card *oldcard) { struct mmc_card *card; u32 node_id; @@ -128,9 +1035,14 @@ static int sd_uhs2_init_card(struct mmc_host *host) if (err) return err; - card = mmc_alloc_card(host, &sd_type); - if (IS_ERR(card)) - return PTR_ERR(card); + if (oldcard) { + card = oldcard; + } else { + card = mmc_alloc_card(host, &sd_type); + if (IS_ERR(card)) + return PTR_ERR(card); + } + host->card = card; card->uhs2_config.node_id = node_id; card->type = MMC_TYPE_SD; @@ -143,22 +1055,40 @@ static int sd_uhs2_init_card(struct mmc_host *host) if (err) goto err; + /* Change to Speed Range B if it is supported */ + if (card->uhs2_state & MMC_UHS2_SPEED_B) { + err = sd_uhs2_change_speed(host, node_id); + if (err) + return err; + } + err = sd_uhs2_legacy_init(host, card); if (err) goto err; - host->card = card; return 0; err: - mmc_remove_card(card); + sd_uhs2_remove(host); return err; } -static void sd_uhs2_remove(struct mmc_host *host) +int sd_uhs2_reinit(struct mmc_host *host) { - mmc_remove_card(host->card); - host->card = NULL; + struct mmc_card *card = host->card; + int err; + + sd_uhs2_power_up(host); + err = sd_uhs2_phy_init(host); + if (err) + return err; + + err = sd_uhs2_init_card(host, card); + if (err) + return err; + + mmc_card_set_present(card); + return err; } static int sd_uhs2_alive(struct mmc_host *host) @@ -184,34 +1114,176 @@ static void sd_uhs2_detect(struct mmc_host *host) } } +static int _sd_uhs2_suspend(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + int err = 0; + + mmc_claim_host(host); + + if (mmc_card_suspended(card)) + goto out; + + if (mmc_card_can_poweroff_notify(card)) + err = sd_poweroff_notify(card); + + if (!err) { + sd_uhs2_power_off(host); + mmc_card_set_suspended(card); + } + +out: + mmc_release_host(host); + return err; +} + +/* + * Callback for suspend + */ static int sd_uhs2_suspend(struct mmc_host *host) { - return 0; + int err; + + err = _sd_uhs2_suspend(host); + if (!err) { + pm_runtime_disable(&host->card->dev); + pm_runtime_set_suspended(&host->card->dev); + } + + return err; +} + +/* + * This function tries to determine if the same card is still present + * and, if so, restore all state to it. + */ +static int _mmc_sd_uhs2_resume(struct mmc_host *host) +{ + int err = 0; + + mmc_claim_host(host); + + if (!mmc_card_suspended(host->card)) + goto out; + + /* Power up UHS2 SD card and re-initialize it. */ + err = sd_uhs2_reinit(host); + mmc_card_clr_suspended(host->card); + +out: + mmc_release_host(host); + return err; } +/* + * Callback for resume + */ static int sd_uhs2_resume(struct mmc_host *host) { + pm_runtime_enable(&host->card->dev); return 0; } +/* + * Callback for runtime_suspend. + */ static int sd_uhs2_runtime_suspend(struct mmc_host *host) { - return 0; + int err; + + if (!(host->caps & MMC_CAP_AGGRESSIVE_PM)) + return 0; + + err = _sd_uhs2_suspend(host); + if (err) + pr_err("%s: error %d doing aggressive suspend\n", mmc_hostname(host), err); + + return err; } static int sd_uhs2_runtime_resume(struct mmc_host *host) { - return 0; + int err; + + err = _mmc_sd_uhs2_resume(host); + if (err && err != -ENOMEDIUM) + pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err); + + return err; } -static int sd_uhs2_shutdown(struct mmc_host *host) +static int sd_uhs2_hw_reset(struct mmc_host *host) { - return 0; + int err; + + sd_uhs2_power_off(host); + /* Wait at least 1 ms according to SD spec */ + mmc_delay(1); + sd_uhs2_power_up(host); + + err = sd_uhs2_reinit(host); + + return err; } -static int sd_uhs2_hw_reset(struct mmc_host *host) +/* + * mmc_uhs2_prepare_cmd - prepare for SD command packet + * @host: MMC host + * @mrq: MMC request + * + * Initialize and fill in a header and a payload of SD command packet. + * The caller should allocate uhs2_command in host->cmd->uhs2_cmd in + * advance. + * + * Return: 0 on success, non-zero error on failure + */ +void mmc_uhs2_prepare_cmd(struct mmc_host *host, struct mmc_request *mrq) { - return 0; + struct mmc_command *cmd; + struct uhs2_command *uhs2_cmd; + u16 header, arg; + __be32 *payload; + u8 plen; + + cmd = mrq->cmd; + header = host->card->uhs2_config.node_id; + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC) + header |= UHS2_PACKET_TYPE_DCMD; + else + header |= UHS2_PACKET_TYPE_CCMD; + + arg = cmd->opcode << UHS2_SD_CMD_INDEX_POS; + if (host->uhs2_ios.is_APP_CMD) { + arg |= UHS2_SD_CMD_APP; + host->uhs2_ios.is_APP_CMD = false; + } + + uhs2_cmd = cmd->uhs2_cmd; + payload = uhs2_cmd->payload; + plen = 2; /* at the maximum */ + + if ((cmd->flags & MMC_CMD_MASK) == MMC_CMD_ADTC && + !cmd->uhs2_tmode0_flag) { + if (host->uhs2_ios.is_2L_HD_mode) + arg |= UHS2_DCMD_2L_HD_MODE; + + arg |= UHS2_DCMD_LM_TLEN_EXIST; + + if (cmd->data->blocks == 1 && + cmd->data->blksz != 512 && + cmd->opcode != MMC_READ_SINGLE_BLOCK && + cmd->opcode != MMC_WRITE_BLOCK) { + arg |= UHS2_DCMD_TLUM_BYTE_MODE; + payload[1] = cpu_to_be32(cmd->data->blksz); + } else { + payload[1] = cpu_to_be32(cmd->data->blocks); + } + } else { + plen = 1; + } + + payload[0] = cpu_to_be32(cmd->arg); + sd_uhs2_cmd_assemble(cmd, uhs2_cmd, header, arg, payload, plen, NULL, 0); } static const struct mmc_bus_ops sd_uhs2_ops = { @@ -222,7 +1294,7 @@ static const struct mmc_bus_ops sd_uhs2_ops = { .resume = sd_uhs2_resume, .runtime_suspend = sd_uhs2_runtime_suspend, .runtime_resume = sd_uhs2_runtime_resume, - .shutdown = sd_uhs2_shutdown, + .shutdown = sd_uhs2_suspend, .hw_reset = sd_uhs2_hw_reset, }; @@ -238,7 +1310,7 @@ static int sd_uhs2_attach(struct mmc_host *host) if (err) goto err; - err = sd_uhs2_init_card(host); + err = sd_uhs2_init_card(host, NULL); if (err) goto err; @@ -251,21 +1323,34 @@ static int sd_uhs2_attach(struct mmc_host *host) goto remove_card; mmc_claim_host(host); + + host->ops->uhs2_control(host, UHS2_POST_ATTACH_SD); + return 0; remove_card: - mmc_remove_card(host->card); - host->card = NULL; + sd_uhs2_remove(host); mmc_claim_host(host); - mmc_detach_bus(host); + err: + mmc_detach_bus(host); sd_uhs2_power_off(host); + host->card->uhs2_state = 0; return err; } +/** + * mmc_attach_sd_uhs2 - select UHS2 interface + * @host: MMC host + * + * Try to select UHS2 interface and initialize the bus for a given + * frequency, @freq. + * + * Return: 0 on success, non-zero error on failure + */ int mmc_attach_sd_uhs2(struct mmc_host *host) { - int i, err = 0; + int i, err; if (!(host->caps2 & MMC_CAP2_SD_UHS2)) return -EOPNOTSUPP; @@ -280,6 +1365,9 @@ int mmc_attach_sd_uhs2(struct mmc_host *host) */ for (i = 0; i < ARRAY_SIZE(sd_uhs2_freqs); i++) { host->f_init = sd_uhs2_freqs[i]; + pr_info("%s: %s: trying to init UHS-II card at %u Hz\n", + mmc_hostname(host), __func__, host->f_init); + err = sd_uhs2_attach(host); if (!err) break;