From patchwork Fri Apr 15 15:21:32 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 562020 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0461DC433EF for ; Fri, 15 Apr 2022 15:22:12 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355017AbiDOPYi (ORCPT ); Fri, 15 Apr 2022 11:24:38 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52252 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355001AbiDOPYd (ORCPT ); Fri, 15 Apr 2022 11:24:33 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 4CCDBCD336 for ; Fri, 15 Apr 2022 08:22:03 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id 0CBC6240002; Fri, 15 Apr 2022 15:21:54 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036116; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=eywiaPhcZL2zuOwynizuZKiTidtk+fl4Mcz69zBIfow=; b=QUYzFmjBBQhbc7T8gyh009kEbewNg0EWqGgsVoASWUhQ/yBxk6sRX/3gNWaaoklHi0eXCg oSUHO/szOxb1o1UHgG8u0v6QBYPvI4xqwRW79Po/1Prh56TYY15hPd4oVjC8yYEnkANAXB QIGg8+RSapWZOlwcyDZiIhRb2v91GZ4IkLMgQOiIDxrnMUIexYU3NU4ZTS8863S4RzxgeO g3FJp/t2rZZN8VCJ5Xw55rKbeh7PN6Lu7YUG+rAndVOhtC4GlZHBavKL+nvM+8+pRHFKM2 I33DT4Jad5rXOTfJrALXksDg8DA7sUHjvquSfdAKYKTz5WrMmGSB1K4sCR7Haw== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni Subject: [PATCH v4 2/8] phy: allwinner: phy-sun6i-mipi-dphy: Support D-PHY Rx mode for MIPI CSI-2 Date: Fri, 15 Apr 2022 17:21:32 +0200 Message-Id: <20220415152138.635525-3-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The Allwinner A31 D-PHY supports both Rx and Tx modes. While the latter is already supported and used for MIPI DSI this adds support for the former, to be used with MIPI CSI-2. This implementation is inspired by Allwinner's V3s Linux SDK implementation, which was used as a documentation base. It uses the direction dt property to distinguish between tx and rx directions. Signed-off-by: Paul Kocialkowski --- drivers/phy/allwinner/phy-sun6i-mipi-dphy.c | 166 +++++++++++++++++++- 1 file changed, 162 insertions(+), 4 deletions(-) diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c index f0bc87d654d4..3900f1650851 100644 --- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c +++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c @@ -24,6 +24,14 @@ #define SUN6I_DPHY_TX_CTL_REG 0x04 #define SUN6I_DPHY_TX_CTL_HS_TX_CLK_CONT BIT(28) +#define SUN6I_DPHY_RX_CTL_REG 0x08 +#define SUN6I_DPHY_RX_CTL_EN_DBC BIT(31) +#define SUN6I_DPHY_RX_CTL_RX_CLK_FORCE BIT(24) +#define SUN6I_DPHY_RX_CTL_RX_D3_FORCE BIT(23) +#define SUN6I_DPHY_RX_CTL_RX_D2_FORCE BIT(22) +#define SUN6I_DPHY_RX_CTL_RX_D1_FORCE BIT(21) +#define SUN6I_DPHY_RX_CTL_RX_D0_FORCE BIT(20) + #define SUN6I_DPHY_TX_TIME0_REG 0x10 #define SUN6I_DPHY_TX_TIME0_HS_TRAIL(n) (((n) & 0xff) << 24) #define SUN6I_DPHY_TX_TIME0_HS_PREPARE(n) (((n) & 0xff) << 16) @@ -44,12 +52,29 @@ #define SUN6I_DPHY_TX_TIME4_HS_TX_ANA1(n) (((n) & 0xff) << 8) #define SUN6I_DPHY_TX_TIME4_HS_TX_ANA0(n) ((n) & 0xff) +#define SUN6I_DPHY_RX_TIME0_REG 0x30 +#define SUN6I_DPHY_RX_TIME0_HS_RX_SYNC(n) (((n) & 0xff) << 24) +#define SUN6I_DPHY_RX_TIME0_HS_RX_CLK_MISS(n) (((n) & 0xff) << 16) +#define SUN6I_DPHY_RX_TIME0_LP_RX(n) (((n) & 0xff) << 8) + +#define SUN6I_DPHY_RX_TIME1_REG 0x34 +#define SUN6I_DPHY_RX_TIME1_RX_DLY(n) (((n) & 0xfff) << 20) +#define SUN6I_DPHY_RX_TIME1_LP_RX_ULPS_WP(n) ((n) & 0xfffff) + +#define SUN6I_DPHY_RX_TIME2_REG 0x38 +#define SUN6I_DPHY_RX_TIME2_HS_RX_ANA1(n) (((n) & 0xff) << 8) +#define SUN6I_DPHY_RX_TIME2_HS_RX_ANA0(n) ((n) & 0xff) + +#define SUN6I_DPHY_RX_TIME3_REG 0x40 +#define SUN6I_DPHY_RX_TIME3_LPRST_DLY(n) (((n) & 0xffff) << 16) + #define SUN6I_DPHY_ANA0_REG 0x4c #define SUN6I_DPHY_ANA0_REG_PWS BIT(31) #define SUN6I_DPHY_ANA0_REG_DMPC BIT(28) #define SUN6I_DPHY_ANA0_REG_DMPD(n) (((n) & 0xf) << 24) #define SUN6I_DPHY_ANA0_REG_SLV(n) (((n) & 7) << 12) #define SUN6I_DPHY_ANA0_REG_DEN(n) (((n) & 0xf) << 8) +#define SUN6I_DPHY_ANA0_REG_SFB(n) (((n) & 3) << 2) #define SUN6I_DPHY_ANA1_REG 0x50 #define SUN6I_DPHY_ANA1_REG_VTTMODE BIT(31) @@ -84,6 +109,11 @@ #define SUN6I_DPHY_DBG5_REG 0xf4 +enum sun6i_dphy_direction { + SUN6I_DPHY_DIRECTION_TX, + SUN6I_DPHY_DIRECTION_RX, +}; + struct sun6i_dphy { struct clk *bus_clk; struct clk *mod_clk; @@ -92,6 +122,8 @@ struct sun6i_dphy { struct phy *phy; struct phy_configure_opts_mipi_dphy config; + + enum sun6i_dphy_direction direction; }; static int sun6i_dphy_init(struct phy *phy) @@ -119,9 +151,8 @@ static int sun6i_dphy_configure(struct phy *phy, union phy_configure_opts *opts) return 0; } -static int sun6i_dphy_power_on(struct phy *phy) +static int sun6i_dphy_tx_power_on(struct sun6i_dphy *dphy) { - struct sun6i_dphy *dphy = phy_get_drvdata(phy); u8 lanes_mask = GENMASK(dphy->config.lanes - 1, 0); regmap_write(dphy->regs, SUN6I_DPHY_TX_CTL_REG, @@ -211,12 +242,129 @@ static int sun6i_dphy_power_on(struct phy *phy) return 0; } +static int sun6i_dphy_rx_power_on(struct sun6i_dphy *dphy) +{ + /* Physical clock rate is actually half of symbol rate with DDR. */ + unsigned long mipi_symbol_rate = dphy->config.hs_clk_rate; + unsigned long dphy_clk_rate; + unsigned int rx_dly; + unsigned int lprst_dly; + u32 value; + + dphy_clk_rate = clk_get_rate(dphy->mod_clk); + if (!dphy_clk_rate) + return -EINVAL; + + /* Hardcoded timing parameters from the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME0_REG, + SUN6I_DPHY_RX_TIME0_HS_RX_SYNC(255) | + SUN6I_DPHY_RX_TIME0_HS_RX_CLK_MISS(255) | + SUN6I_DPHY_RX_TIME0_LP_RX(255)); + + /* + * Formula from the Allwinner BSP, with hardcoded coefficients + * (probably internal divider/multiplier). + */ + rx_dly = 8 * (unsigned int)(dphy_clk_rate / (mipi_symbol_rate / 8)); + + /* + * The Allwinner BSP has an alternative formula for LP_RX_ULPS_WP: + * lp_ulps_wp_cnt = lp_ulps_wp_ms * lp_clk / 1000 + * but does not use it and hardcodes 255 instead. + */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME1_REG, + SUN6I_DPHY_RX_TIME1_RX_DLY(rx_dly) | + SUN6I_DPHY_RX_TIME1_LP_RX_ULPS_WP(255)); + + /* HS_RX_ANA0 value is hardcoded in the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME2_REG, + SUN6I_DPHY_RX_TIME2_HS_RX_ANA0(4)); + + /* + * Formula from the Allwinner BSP, with hardcoded coefficients + * (probably internal divider/multiplier). + */ + lprst_dly = 4 * (unsigned int)(dphy_clk_rate / (mipi_symbol_rate / 2)); + + regmap_write(dphy->regs, SUN6I_DPHY_RX_TIME3_REG, + SUN6I_DPHY_RX_TIME3_LPRST_DLY(lprst_dly)); + + /* Analog parameters are hardcoded in the Allwinner BSP. */ + regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG, + SUN6I_DPHY_ANA0_REG_PWS | + SUN6I_DPHY_ANA0_REG_SLV(7) | + SUN6I_DPHY_ANA0_REG_SFB(2)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA1_REG, + SUN6I_DPHY_ANA1_REG_SVTT(4)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG, + SUN6I_DPHY_ANA4_REG_DMPLVC | + SUN6I_DPHY_ANA4_REG_DMPLVD(1)); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA2_REG, + SUN6I_DPHY_ANA2_REG_ENIB); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG, + SUN6I_DPHY_ANA3_EN_LDOR | + SUN6I_DPHY_ANA3_EN_LDOC | + SUN6I_DPHY_ANA3_EN_LDOD); + + /* + * Delay comes from the Allwinner BSP, likely for internal regulator + * ramp-up. + */ + udelay(3); + + value = SUN6I_DPHY_RX_CTL_EN_DBC | SUN6I_DPHY_RX_CTL_RX_CLK_FORCE; + + /* + * Rx data lane force-enable bits are used as regular RX enable by the + * Allwinner BSP. + */ + if (dphy->config.lanes >= 1) + value |= SUN6I_DPHY_RX_CTL_RX_D0_FORCE; + if (dphy->config.lanes >= 2) + value |= SUN6I_DPHY_RX_CTL_RX_D1_FORCE; + if (dphy->config.lanes >= 3) + value |= SUN6I_DPHY_RX_CTL_RX_D2_FORCE; + if (dphy->config.lanes == 4) + value |= SUN6I_DPHY_RX_CTL_RX_D3_FORCE; + + regmap_write(dphy->regs, SUN6I_DPHY_RX_CTL_REG, value); + + regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG, + SUN6I_DPHY_GCTL_LANE_NUM(dphy->config.lanes) | + SUN6I_DPHY_GCTL_EN); + + return 0; +} + +static int sun6i_dphy_power_on(struct phy *phy) +{ + struct sun6i_dphy *dphy = phy_get_drvdata(phy); + + switch (dphy->direction) { + case SUN6I_DPHY_DIRECTION_TX: + return sun6i_dphy_tx_power_on(dphy); + case SUN6I_DPHY_DIRECTION_RX: + return sun6i_dphy_rx_power_on(dphy); + default: + return -EINVAL; + } +} + static int sun6i_dphy_power_off(struct phy *phy) { struct sun6i_dphy *dphy = phy_get_drvdata(phy); - regmap_update_bits(dphy->regs, SUN6I_DPHY_ANA1_REG, - SUN6I_DPHY_ANA1_REG_VTTMODE, 0); + regmap_write(dphy->regs, SUN6I_DPHY_GCTL_REG, 0); + + regmap_write(dphy->regs, SUN6I_DPHY_ANA0_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA1_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA2_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA3_REG, 0); + regmap_write(dphy->regs, SUN6I_DPHY_ANA4_REG, 0); return 0; } @@ -253,7 +401,9 @@ static int sun6i_dphy_probe(struct platform_device *pdev) { struct phy_provider *phy_provider; struct sun6i_dphy *dphy; + const char *direction; void __iomem *regs; + int ret; dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL); if (!dphy) @@ -290,6 +440,14 @@ static int sun6i_dphy_probe(struct platform_device *pdev) return PTR_ERR(dphy->phy); } + dphy->direction = SUN6I_DPHY_DIRECTION_TX; + + ret = of_property_read_string(pdev->dev.of_node, "allwinner,direction", + &direction); + + if (!ret && !strncmp(direction, "rx", 2)) + dphy->direction = SUN6I_DPHY_DIRECTION_RX; + phy_set_drvdata(dphy->phy, dphy); phy_provider = devm_of_phy_provider_register(&pdev->dev, of_phy_simple_xlate); From patchwork Fri Apr 15 15:21:35 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 562018 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id B10D6C433FE for ; Fri, 15 Apr 2022 15:22:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355037AbiDOPYm (ORCPT ); Fri, 15 Apr 2022 11:24:42 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52344 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355011AbiDOPYh (ORCPT ); Fri, 15 Apr 2022 11:24:37 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5F4A2CD33E; Fri, 15 Apr 2022 08:22:03 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id DA0FC240009; Fri, 15 Apr 2022 15:22:00 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036122; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=10b4S4mz35oiylfbMWhjO8E35+RXi/3xmkw3KSPKXkw=; b=g8M2lgT5YYI10n/XUCPpCkISXgzPCU/P7d9Z6K/NMbLDcTjBgVacGCjRQCGWiAHpuc6w1F gsCS2oGLgNH3j/QCkJkou2NU6UWFuPV37YNOlakFbZSfoxgXtOJiAw7d1fUFtMBmkgvtwi lbYH9AeHg3PSRwjj8LhVhJTiyp/KfDFH9roOS0VCLPotz6wmdBfIQG2b/HXsqZoE6DCwiH 1Fo84eM221HIMP25prNGRgC+WNWQFJGklzch4EtFWWxT6ek+QnyhCsVLWWcKEQ2zSZM8In GGwr9dYvdrdb4E5+W22S5U5Sfw4FRQ5RWnUaFo+5AF4q2Wf5z55B8aytcLWiVA== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni Subject: [PATCH v4 5/8] media: sunxi: Add support for the A31 MIPI CSI-2 controller Date: Fri, 15 Apr 2022 17:21:35 +0200 Message-Id: <20220415152138.635525-6-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org The A31 MIPI CSI-2 controller is a dedicated MIPI CSI-2 bridge found on Allwinner SoCs such as the A31 and V3/V3s. It is a standalone block, connected to the CSI controller on one side and to the MIPI D-PHY block on the other. It has a dedicated address space, interrupt line and clock. It is represented as a V4L2 subdev to the CSI controller and takes a MIPI CSI-2 sensor as its own subdev, all using the fwnode graph and media controller API. Only 8-bit and 10-bit Bayer formats are currently supported. While up to 4 internal channels to the CSI controller exist, only one is currently supported by this implementation. Signed-off-by: Paul Kocialkowski Acked-by: Maxime Ripard --- drivers/media/platform/sunxi/Kconfig | 1 + drivers/media/platform/sunxi/Makefile | 1 + .../platform/sunxi/sun6i-mipi-csi2/Kconfig | 14 + .../platform/sunxi/sun6i-mipi-csi2/Makefile | 4 + .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c | 749 ++++++++++++++++++ .../sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h | 52 ++ .../sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h | 76 ++ 7 files changed, 897 insertions(+) create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h create mode 100644 drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h diff --git a/drivers/media/platform/sunxi/Kconfig b/drivers/media/platform/sunxi/Kconfig index 46b7b9bf989c..d33dce2e444b 100644 --- a/drivers/media/platform/sunxi/Kconfig +++ b/drivers/media/platform/sunxi/Kconfig @@ -4,5 +4,6 @@ comment "Sunxi media platform drivers" source "drivers/media/platform/sunxi/sun4i-csi/Kconfig" source "drivers/media/platform/sunxi/sun6i-csi/Kconfig" +source "drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig" source "drivers/media/platform/sunxi/sun8i-di/Kconfig" source "drivers/media/platform/sunxi/sun8i-rotate/Kconfig" diff --git a/drivers/media/platform/sunxi/Makefile b/drivers/media/platform/sunxi/Makefile index fc537c9f5ca9..887a7cae8fca 100644 --- a/drivers/media/platform/sunxi/Makefile +++ b/drivers/media/platform/sunxi/Makefile @@ -2,5 +2,6 @@ obj-y += sun4i-csi/ obj-y += sun6i-csi/ +obj-y += sun6i-mipi-csi2/ obj-y += sun8i-di/ obj-y += sun8i-rotate/ diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig new file mode 100644 index 000000000000..b1712f5873fd --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +config VIDEO_SUN6I_MIPI_CSI2 + tristate "Allwinner A31 MIPI CSI-2 Controller Driver" + depends on V4L_PLATFORM_DRIVERS && VIDEO_DEV + depends on ARCH_SUNXI || COMPILE_TEST + depends on PM && COMMON_CLK + select MEDIA_CONTROLLER + select VIDEO_V4L2_SUBDEV_API + select V4L2_FWNODE + select PHY_SUN6I_MIPI_DPHY + select REGMAP_MMIO + help + Support for the Allwinner A31 MIPI CSI-2 controller, also found on + other platforms such as the V3/V3s. diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile new file mode 100644 index 000000000000..14e4e03818b5 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only +sun6i-mipi-csi2-y += sun6i_mipi_csi2.o + +obj-$(CONFIG_VIDEO_SUN6I_MIPI_CSI2) += sun6i-mipi-csi2.o diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c new file mode 100644 index 000000000000..31e12f1506cb --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.c @@ -0,0 +1,749 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sun6i_mipi_csi2.h" +#include "sun6i_mipi_csi2_reg.h" + +/* Format */ + +static const struct sun6i_mipi_csi2_format sun6i_mipi_csi2_formats[] = { + { + .mbus_code = MEDIA_BUS_FMT_SBGGR8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGBRG8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGRBG8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SRGGB8_1X8, + .data_type = MIPI_CSI2_DT_RAW8, + .bpp = 8, + }, + { + .mbus_code = MEDIA_BUS_FMT_SBGGR10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGBRG10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SGRBG10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, + { + .mbus_code = MEDIA_BUS_FMT_SRGGB10_1X10, + .data_type = MIPI_CSI2_DT_RAW10, + .bpp = 10, + }, +}; + +static const struct sun6i_mipi_csi2_format * +sun6i_mipi_csi2_format_find(u32 mbus_code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(sun6i_mipi_csi2_formats); i++) + if (sun6i_mipi_csi2_formats[i].mbus_code == mbus_code) + return &sun6i_mipi_csi2_formats[i]; + + return NULL; +} + +/* Controller */ + +static void sun6i_mipi_csi2_enable(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_EN, SUN6I_MIPI_CSI2_CTL_EN); +} + +static void sun6i_mipi_csi2_disable(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_EN, 0); +} + +static void sun6i_mipi_csi2_configure(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct regmap *regmap = csi2_dev->regmap; + unsigned int lanes_count = + csi2_dev->bridge.endpoint.bus.mipi_csi2.num_data_lanes; + struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format; + const struct sun6i_mipi_csi2_format *format; + struct device *dev = csi2_dev->dev; + u32 version = 0; + + format = sun6i_mipi_csi2_format_find(mbus_format->code); + if (WARN_ON(!format)) + return; + + /* + * The enable flow in the Allwinner BSP is a bit different: the enable + * and reset bits are set together before starting the CSI controller. + * + * In mainline we enable the CSI controller first (due to subdev logic). + * One reliable way to make this work is to deassert reset, configure + * registers and enable the controller when everything's ready. + * + * However, setting the version enable bit and removing it afterwards + * appears necessary for capture to work reliably, while replacing it + * with a delay doesn't do the trick. + */ + regmap_write(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_RESET_N | + SUN6I_MIPI_CSI2_CTL_VERSION_EN | + SUN6I_MIPI_CSI2_CTL_UNPK_EN); + + regmap_read(regmap, SUN6I_MIPI_CSI2_VERSION_REG, &version); + + regmap_update_bits(regmap, SUN6I_MIPI_CSI2_CTL_REG, + SUN6I_MIPI_CSI2_CTL_VERSION_EN, 0); + + dev_dbg(dev, "A31 MIPI CSI-2 version: %04x\n", version); + + regmap_write(regmap, SUN6I_MIPI_CSI2_CFG_REG, + SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(1) | + SUN6I_MIPI_CSI2_CFG_LANE_COUNT(lanes_count)); + + /* + * Only a single virtual channel (index 0) is currently supported. + * While the registers do mention multiple physical channels being + * available (which can be configured to match a specific virtual + * channel or data type), it's unclear whether channels > 0 are actually + * connected and available and the reference source code only makes use + * of channel 0. + * + * Using extra channels would also require matching channels to be + * available on the CSI (and ISP) side, which is also unsure although + * some CSI implementations are said to support multiple channels for + * BT656 time-sharing. + * + * We still configure virtual channel numbers to ensure that virtual + * channel 0 only goes to channel 0. + */ + + regmap_write(regmap, SUN6I_MIPI_CSI2_VCDT_RX_REG, + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(3, 3) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(2, 2) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(1, 1) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(0, 0) | + SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(0, format->data_type)); + + regmap_write(regmap, SUN6I_MIPI_CSI2_CH_INT_PD_REG, + SUN6I_MIPI_CSI2_CH_INT_PD_CLEAR); +} + +/* V4L2 Subdev */ + +static int sun6i_mipi_csi2_s_stream(struct v4l2_subdev *subdev, int on) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + struct v4l2_subdev *source_subdev = csi2_dev->bridge.source_subdev; + union phy_configure_opts dphy_opts = { 0 }; + struct phy_configure_opts_mipi_dphy *dphy_cfg = &dphy_opts.mipi_dphy; + struct v4l2_mbus_framefmt *mbus_format = &csi2_dev->bridge.mbus_format; + const struct sun6i_mipi_csi2_format *format; + struct phy *dphy = csi2_dev->dphy; + struct device *dev = csi2_dev->dev; + struct v4l2_ctrl *ctrl; + unsigned int lanes_count = + csi2_dev->bridge.endpoint.bus.mipi_csi2.num_data_lanes; + unsigned long pixel_rate; + /* Initialize to 0 to use both in disable label (ret != 0) and off. */ + int ret = 0; + + if (!source_subdev) + return -ENODEV; + + if (!on) { + v4l2_subdev_call(source_subdev, video, s_stream, 0); + goto disable; + } + + /* Runtime PM */ + + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + return ret; + + /* Sensor Pixel Rate */ + + ctrl = v4l2_ctrl_find(source_subdev->ctrl_handler, V4L2_CID_PIXEL_RATE); + if (!ctrl) { + dev_err(dev, "missing sensor pixel rate\n"); + ret = -ENODEV; + goto error_pm; + } + + pixel_rate = (unsigned long)v4l2_ctrl_g_ctrl_int64(ctrl); + if (!pixel_rate) { + dev_err(dev, "missing (zero) sensor pixel rate\n"); + ret = -ENODEV; + goto error_pm; + } + + /* D-PHY */ + + if (!lanes_count) { + dev_err(dev, "missing (zero) MIPI CSI-2 lanes count\n"); + ret = -ENODEV; + goto error_pm; + } + + format = sun6i_mipi_csi2_format_find(mbus_format->code); + if (WARN_ON(!format)) { + ret = -ENODEV; + goto error_pm; + } + + phy_mipi_dphy_get_default_config(pixel_rate, format->bpp, lanes_count, + dphy_cfg); + + /* + * Note that our hardware is using DDR, which is not taken in account by + * phy_mipi_dphy_get_default_config when calculating hs_clk_rate from + * the pixel rate, lanes count and bpp. + * + * The resulting clock rate is basically the symbol rate over the whole + * link. The actual clock rate is calculated with division by two since + * DDR samples both on rising and falling edges. + */ + + dev_dbg(dev, "A31 MIPI CSI-2 config:\n"); + dev_dbg(dev, "%ld pixels/s, %u bits/pixel, %u lanes, %lu Hz clock\n", + pixel_rate, format->bpp, lanes_count, + dphy_cfg->hs_clk_rate / 2); + + ret = phy_reset(dphy); + if (ret) { + dev_err(dev, "failed to reset MIPI D-PHY\n"); + goto error_pm; + } + + ret = phy_configure(dphy, &dphy_opts); + if (ret) { + dev_err(dev, "failed to configure MIPI D-PHY\n"); + goto error_pm; + } + + /* Controller */ + + sun6i_mipi_csi2_configure(csi2_dev); + sun6i_mipi_csi2_enable(csi2_dev); + + /* D-PHY */ + + ret = phy_power_on(dphy); + if (ret) { + dev_err(dev, "failed to power on MIPI D-PHY\n"); + goto error_pm; + } + + /* Source */ + + ret = v4l2_subdev_call(source_subdev, video, s_stream, 1); + if (ret && ret != -ENOIOCTLCMD) + goto disable; + + return 0; + +disable: + phy_power_off(dphy); + sun6i_mipi_csi2_disable(csi2_dev); + +error_pm: + pm_runtime_put(dev); + + return ret; +} + +static const struct v4l2_subdev_video_ops sun6i_mipi_csi2_video_ops = { + .s_stream = sun6i_mipi_csi2_s_stream, +}; + +static void +sun6i_mipi_csi2_mbus_format_prepare(struct v4l2_mbus_framefmt *mbus_format) +{ + if (!sun6i_mipi_csi2_format_find(mbus_format->code)) + mbus_format->code = sun6i_mipi_csi2_formats[0].mbus_code; + + mbus_format->field = V4L2_FIELD_NONE; + mbus_format->colorspace = V4L2_COLORSPACE_RAW; + mbus_format->quantization = V4L2_QUANTIZATION_DEFAULT; + mbus_format->xfer_func = V4L2_XFER_FUNC_DEFAULT; +} + +static int sun6i_mipi_csi2_init_cfg(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + unsigned int pad = SUN6I_MIPI_CSI2_PAD_SINK; + struct v4l2_mbus_framefmt *mbus_format = + v4l2_subdev_get_try_format(subdev, state, pad); + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + mbus_format->code = sun6i_mipi_csi2_formats[0].mbus_code; + mbus_format->width = 640; + mbus_format->height = 480; + + sun6i_mipi_csi2_mbus_format_prepare(mbus_format); + + mutex_unlock(lock); + + return 0; +} + +static int +sun6i_mipi_csi2_enum_mbus_code(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code_enum) +{ + if (code_enum->index >= ARRAY_SIZE(sun6i_mipi_csi2_formats)) + return -EINVAL; + + code_enum->code = sun6i_mipi_csi2_formats[code_enum->index].mbus_code; + + return 0; +} + +static int sun6i_mipi_csi2_get_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *mbus_format = *v4l2_subdev_get_try_format(subdev, state, + format->pad); + else + *mbus_format = csi2_dev->bridge.mbus_format; + + mutex_unlock(lock); + + return 0; +} + +static int sun6i_mipi_csi2_set_fmt(struct v4l2_subdev *subdev, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct sun6i_mipi_csi2_device *csi2_dev = v4l2_get_subdevdata(subdev); + struct v4l2_mbus_framefmt *mbus_format = &format->format; + struct mutex *lock = &csi2_dev->bridge.lock; + + mutex_lock(lock); + + sun6i_mipi_csi2_mbus_format_prepare(mbus_format); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + *v4l2_subdev_get_try_format(subdev, state, format->pad) = + *mbus_format; + else + csi2_dev->bridge.mbus_format = *mbus_format; + + mutex_unlock(lock); + + return 0; +} + +static const struct v4l2_subdev_pad_ops sun6i_mipi_csi2_pad_ops = { + .init_cfg = sun6i_mipi_csi2_init_cfg, + .enum_mbus_code = sun6i_mipi_csi2_enum_mbus_code, + .get_fmt = sun6i_mipi_csi2_get_fmt, + .set_fmt = sun6i_mipi_csi2_set_fmt, +}; + +static const struct v4l2_subdev_ops sun6i_mipi_csi2_subdev_ops = { + .video = &sun6i_mipi_csi2_video_ops, + .pad = &sun6i_mipi_csi2_pad_ops, +}; + +/* Media Entity */ + +static const struct media_entity_operations sun6i_mipi_csi2_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +/* V4L2 Async */ + +static int +sun6i_mipi_csi2_notifier_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *remote_subdev, + struct v4l2_async_subdev *async_subdev) +{ + struct v4l2_subdev *subdev = notifier->sd; + struct sun6i_mipi_csi2_device *csi2_dev = + container_of(notifier, struct sun6i_mipi_csi2_device, + bridge.notifier); + struct media_entity *sink_entity = &subdev->entity; + struct media_entity *source_entity = &remote_subdev->entity; + struct device *dev = csi2_dev->dev; + int sink_pad_index = 0; + int source_pad_index; + int ret; + + ret = media_entity_get_fwnode_pad(source_entity, remote_subdev->fwnode, + MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(dev, "missing source pad in external entity %s\n", + source_entity->name); + return -EINVAL; + } + + source_pad_index = ret; + + dev_dbg(dev, "creating %s:%u -> %s:%u link\n", source_entity->name, + source_pad_index, sink_entity->name, sink_pad_index); + + ret = media_create_pad_link(source_entity, source_pad_index, + sink_entity, sink_pad_index, + MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); + if (ret) { + dev_err(dev, "failed to create %s:%u -> %s:%u link\n", + source_entity->name, source_pad_index, + sink_entity->name, sink_pad_index); + return ret; + } + + csi2_dev->bridge.source_subdev = remote_subdev; + + return 0; +} + +static const struct v4l2_async_notifier_operations +sun6i_mipi_csi2_notifier_ops = { + .bound = sun6i_mipi_csi2_notifier_bound, +}; + +/* Bridge */ + +static int +sun6i_mipi_csi2_bridge_source_setup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct v4l2_async_notifier *notifier = &csi2_dev->bridge.notifier; + struct v4l2_fwnode_endpoint *endpoint = &csi2_dev->bridge.endpoint; + struct v4l2_async_subdev *subdev_async; + struct fwnode_handle *handle; + struct device *dev = csi2_dev->dev; + int ret; + + handle = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!handle) + return -ENODEV; + + endpoint->bus_type = V4L2_MBUS_CSI2_DPHY; + + ret = v4l2_fwnode_endpoint_parse(handle, endpoint); + if (ret) + goto complete; + + subdev_async = + v4l2_async_nf_add_fwnode_remote(notifier, handle, + struct v4l2_async_subdev); + if (IS_ERR(subdev_async)) + ret = PTR_ERR(subdev_async); + +complete: + fwnode_handle_put(handle); + + return ret; +} + +static int sun6i_mipi_csi2_bridge_setup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct sun6i_mipi_csi2_bridge *bridge = &csi2_dev->bridge; + struct v4l2_subdev *subdev = &bridge->subdev; + struct v4l2_async_notifier *notifier = &bridge->notifier; + struct media_pad *pads = bridge->pads; + struct device *dev = csi2_dev->dev; + int ret; + + mutex_init(&bridge->lock); + + /* V4L2 Subdev */ + + v4l2_subdev_init(subdev, &sun6i_mipi_csi2_subdev_ops); + strscpy(subdev->name, SUN6I_MIPI_CSI2_NAME, sizeof(subdev->name)); + subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + subdev->owner = THIS_MODULE; + subdev->dev = dev; + + v4l2_set_subdevdata(subdev, csi2_dev); + + /* Media Entity */ + + subdev->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + subdev->entity.ops = &sun6i_mipi_csi2_entity_ops; + + /* Media Pads */ + + pads[SUN6I_MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[SUN6I_MIPI_CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + ret = media_entity_pads_init(&subdev->entity, SUN6I_MIPI_CSI2_PAD_COUNT, + pads); + if (ret) + return ret; + + /* V4L2 Async */ + + v4l2_async_nf_init(notifier); + notifier->ops = &sun6i_mipi_csi2_notifier_ops; + + ret = sun6i_mipi_csi2_bridge_source_setup(csi2_dev); + if (ret) + goto error_v4l2_notifier_cleanup; + + ret = v4l2_async_subdev_nf_register(subdev, notifier); + if (ret < 0) + goto error_v4l2_notifier_cleanup; + + /* V4L2 Subdev */ + + ret = v4l2_async_register_subdev(subdev); + if (ret < 0) + goto error_v4l2_notifier_unregister; + + return 0; + +error_v4l2_notifier_unregister: + v4l2_async_nf_unregister(notifier); + +error_v4l2_notifier_cleanup: + v4l2_async_nf_cleanup(notifier); + + media_entity_cleanup(&subdev->entity); + + return ret; +} + +static void +sun6i_mipi_csi2_bridge_cleanup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + struct v4l2_subdev *subdev = &csi2_dev->bridge.subdev; + struct v4l2_async_notifier *notifier = &csi2_dev->bridge.notifier; + + v4l2_async_unregister_subdev(subdev); + v4l2_async_nf_unregister(notifier); + v4l2_async_nf_cleanup(notifier); + media_entity_cleanup(&subdev->entity); +} + +/* Platform */ + +static int sun6i_mipi_csi2_suspend(struct device *dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev = dev_get_drvdata(dev); + + clk_disable_unprepare(csi2_dev->clock_mod); + reset_control_assert(csi2_dev->reset); + + return 0; +} + +static int sun6i_mipi_csi2_resume(struct device *dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev = dev_get_drvdata(dev); + int ret; + + ret = reset_control_deassert(csi2_dev->reset); + if (ret) { + dev_err(dev, "failed to deassert reset\n"); + return ret; + } + + ret = clk_prepare_enable(csi2_dev->clock_mod); + if (ret) { + dev_err(dev, "failed to enable module clock\n"); + goto error_reset; + } + + return 0; + +error_reset: + reset_control_assert(csi2_dev->reset); + + return ret; +} + +static const struct dev_pm_ops sun6i_mipi_csi2_pm_ops = { + .runtime_suspend = sun6i_mipi_csi2_suspend, + .runtime_resume = sun6i_mipi_csi2_resume, +}; + +static const struct regmap_config sun6i_mipi_csi2_regmap_config = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .max_register = 0x400, +}; + +static int +sun6i_mipi_csi2_resources_setup(struct sun6i_mipi_csi2_device *csi2_dev, + struct platform_device *platform_dev) +{ + struct device *dev = csi2_dev->dev; + void __iomem *io_base; + int ret; + + /* Registers */ + + io_base = devm_platform_ioremap_resource(platform_dev, 0); + if (IS_ERR(io_base)) + return PTR_ERR(io_base); + + csi2_dev->regmap = + devm_regmap_init_mmio_clk(dev, "bus", io_base, + &sun6i_mipi_csi2_regmap_config); + if (IS_ERR(csi2_dev->regmap)) { + dev_err(dev, "failed to init register map\n"); + return PTR_ERR(csi2_dev->regmap); + } + + /* Clock */ + + csi2_dev->clock_mod = devm_clk_get(dev, "mod"); + if (IS_ERR(csi2_dev->clock_mod)) { + dev_err(dev, "failed to acquire mod clock\n"); + return PTR_ERR(csi2_dev->clock_mod); + } + + ret = clk_set_rate_exclusive(csi2_dev->clock_mod, 297000000); + if (ret) { + dev_err(dev, "failed to set mod clock rate\n"); + return ret; + } + + /* Reset */ + + csi2_dev->reset = devm_reset_control_get_shared(dev, NULL); + if (IS_ERR(csi2_dev->reset)) { + dev_err(dev, "failed to get reset controller\n"); + return PTR_ERR(csi2_dev->reset); + } + + /* D-PHY */ + + csi2_dev->dphy = devm_phy_get(dev, "dphy"); + if (IS_ERR(csi2_dev->dphy)) { + dev_err(dev, "failed to get MIPI D-PHY\n"); + return PTR_ERR(csi2_dev->dphy); + } + + ret = phy_init(csi2_dev->dphy); + if (ret) { + dev_err(dev, "failed to initialize MIPI D-PHY\n"); + return ret; + } + + /* Runtime PM */ + + pm_runtime_enable(dev); + + return 0; +} + +static void +sun6i_mipi_csi2_resources_cleanup(struct sun6i_mipi_csi2_device *csi2_dev) +{ + pm_runtime_disable(csi2_dev->dev); + phy_exit(csi2_dev->dphy); + clk_rate_exclusive_put(csi2_dev->clock_mod); +} + +static int sun6i_mipi_csi2_probe(struct platform_device *platform_dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev; + struct device *dev = &platform_dev->dev; + int ret; + + csi2_dev = devm_kzalloc(dev, sizeof(*csi2_dev), GFP_KERNEL); + if (!csi2_dev) + return -ENOMEM; + + csi2_dev->dev = dev; + platform_set_drvdata(platform_dev, csi2_dev); + + ret = sun6i_mipi_csi2_resources_setup(csi2_dev, platform_dev); + if (ret) + return ret; + + ret = sun6i_mipi_csi2_bridge_setup(csi2_dev); + if (ret) + return ret; + + return 0; +} + +static int sun6i_mipi_csi2_remove(struct platform_device *platform_dev) +{ + struct sun6i_mipi_csi2_device *csi2_dev = + platform_get_drvdata(platform_dev); + + sun6i_mipi_csi2_bridge_cleanup(csi2_dev); + sun6i_mipi_csi2_resources_cleanup(csi2_dev); + + return 0; +} + +static const struct of_device_id sun6i_mipi_csi2_of_match[] = { + { .compatible = "allwinner,sun6i-a31-mipi-csi2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, sun6i_mipi_csi2_of_match); + +static struct platform_driver sun6i_mipi_csi2_platform_driver = { + .probe = sun6i_mipi_csi2_probe, + .remove = sun6i_mipi_csi2_remove, + .driver = { + .name = SUN6I_MIPI_CSI2_NAME, + .of_match_table = of_match_ptr(sun6i_mipi_csi2_of_match), + .pm = &sun6i_mipi_csi2_pm_ops, + }, +}; +module_platform_driver(sun6i_mipi_csi2_platform_driver); + +MODULE_DESCRIPTION("Allwinner A31 MIPI CSI-2 Controller Driver"); +MODULE_AUTHOR("Paul Kocialkowski "); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h new file mode 100644 index 000000000000..24b15e34b5e8 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef _SUN6I_MIPI_CSI2_H_ +#define _SUN6I_MIPI_CSI2_H_ + +#include +#include +#include +#include +#include + +#define SUN6I_MIPI_CSI2_NAME "sun6i-mipi-csi2" + +enum sun6i_mipi_csi2_pad { + SUN6I_MIPI_CSI2_PAD_SINK = 0, + SUN6I_MIPI_CSI2_PAD_SOURCE = 1, + SUN6I_MIPI_CSI2_PAD_COUNT = 2, +}; + +struct sun6i_mipi_csi2_format { + u32 mbus_code; + u8 data_type; + u32 bpp; +}; + +struct sun6i_mipi_csi2_bridge { + struct v4l2_subdev subdev; + struct media_pad pads[SUN6I_MIPI_CSI2_PAD_COUNT]; + struct v4l2_fwnode_endpoint endpoint; + struct v4l2_async_notifier notifier; + struct v4l2_mbus_framefmt mbus_format; + struct mutex lock; /* Mbus format lock. */ + + struct v4l2_subdev *source_subdev; +}; + +struct sun6i_mipi_csi2_device { + struct device *dev; + + struct regmap *regmap; + struct clk *clock_mod; + struct reset_control *reset; + struct phy *dphy; + + struct sun6i_mipi_csi2_bridge bridge; +}; + +#endif diff --git a/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h new file mode 100644 index 000000000000..d9c92cf2b038 --- /dev/null +++ b/drivers/media/platform/sunxi/sun6i-mipi-csi2/sun6i_mipi_csi2_reg.h @@ -0,0 +1,76 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright 2020-2022 Bootlin + * Author: Paul Kocialkowski + */ + +#ifndef _SUN6I_MIPI_CSI2_REG_H_ +#define _SUN6I_MIPI_CSI2_REG_H_ + +#define SUN6I_MIPI_CSI2_CTL_REG 0x0 +#define SUN6I_MIPI_CSI2_CTL_RESET_N BIT(31) +#define SUN6I_MIPI_CSI2_CTL_VERSION_EN BIT(30) +#define SUN6I_MIPI_CSI2_CTL_UNPK_EN BIT(1) +#define SUN6I_MIPI_CSI2_CTL_EN BIT(0) + +#define SUN6I_MIPI_CSI2_CFG_REG 0x4 +#define SUN6I_MIPI_CSI2_CFG_CHANNEL_MODE(v) ((((v) - 1) << 8) & \ + GENMASK(9, 8)) +#define SUN6I_MIPI_CSI2_CFG_LANE_COUNT(v) (((v) - 1) & GENMASK(1, 0)) + +#define SUN6I_MIPI_CSI2_VCDT_RX_REG 0x8 +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_VC(ch, vc) (((vc) & GENMASK(1, 0)) << \ + ((ch) * 8 + 6)) +#define SUN6I_MIPI_CSI2_VCDT_RX_CH_DT(ch, t) (((t) & GENMASK(5, 0)) << \ + ((ch) * 8)) +#define SUN6I_MIPI_CSI2_RX_PKT_NUM_REG 0xc + +#define SUN6I_MIPI_CSI2_VERSION_REG 0x3c + +#define SUN6I_MIPI_CSI2_CH_CFG_REG 0x40 +#define SUN6I_MIPI_CSI2_CH_INT_EN_REG 0x50 +#define SUN6I_MIPI_CSI2_CH_INT_EN_EOT_ERR BIT(29) +#define SUN6I_MIPI_CSI2_CH_INT_EN_CHKSUM_ERR BIT(28) +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_WRN BIT(27) +#define SUN6I_MIPI_CSI2_CH_INT_EN_ECC_ERR BIT(26) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_SYNC_ERR BIT(25) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_SYNC_ERR BIT(24) +#define SUN6I_MIPI_CSI2_CH_INT_EN_EMB_DATA BIT(18) +#define SUN6I_MIPI_CSI2_CH_INT_EN_PF BIT(17) +#define SUN6I_MIPI_CSI2_CH_INT_EN_PH_UPDATE BIT(16) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_START_SYNC BIT(11) +#define SUN6I_MIPI_CSI2_CH_INT_EN_LINE_END_SYNC BIT(10) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_START_SYNC BIT(9) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FRAME_END_SYNC BIT(8) +#define SUN6I_MIPI_CSI2_CH_INT_EN_FIFO_OVER BIT(0) + +#define SUN6I_MIPI_CSI2_CH_INT_PD_REG 0x58 +#define SUN6I_MIPI_CSI2_CH_INT_PD_CLEAR 0xff +#define SUN6I_MIPI_CSI2_CH_INT_PD_EOT_ERR BIT(29) +#define SUN6I_MIPI_CSI2_CH_INT_PD_CHKSUM_ERR BIT(28) +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_WRN BIT(27) +#define SUN6I_MIPI_CSI2_CH_INT_PD_ECC_ERR BIT(26) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_SYNC_ERR BIT(25) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_SYNC_ERR BIT(24) +#define SUN6I_MIPI_CSI2_CH_INT_PD_EMB_DATA BIT(18) +#define SUN6I_MIPI_CSI2_CH_INT_PD_PF BIT(17) +#define SUN6I_MIPI_CSI2_CH_INT_PD_PH_UPDATE BIT(16) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_START_SYNC BIT(11) +#define SUN6I_MIPI_CSI2_CH_INT_PD_LINE_END_SYNC BIT(10) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_START_SYNC BIT(9) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FRAME_END_SYNC BIT(8) +#define SUN6I_MIPI_CSI2_CH_INT_PD_FIFO_OVER BIT(0) + +#define SUN6I_MIPI_CSI2_CH_DT_TRIGGER_REG 0x60 +#define SUN6I_MIPI_CSI2_CH_CUR_PH_REG 0x70 +#define SUN6I_MIPI_CSI2_CH_ECC_REG 0x74 +#define SUN6I_MIPI_CSI2_CH_CKS_REG 0x78 +#define SUN6I_MIPI_CSI2_CH_FRAME_NUM_REG 0x7c +#define SUN6I_MIPI_CSI2_CH_LINE_NUM_REG 0x80 + +#define SUN6I_MIPI_CSI2_CH_OFFSET 0x100 + +#define SUN6I_MIPI_CSI2_CH_REG(reg, ch) \ + (SUN6I_MIPI_CSI2_CH_OFFSET * (ch) + (reg)) + +#endif From patchwork Fri Apr 15 15:21:36 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Paul Kocialkowski X-Patchwork-Id: 562019 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 783A4C433EF for ; Fri, 15 Apr 2022 15:22:14 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1355023AbiDOPYj (ORCPT ); Fri, 15 Apr 2022 11:24:39 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:52346 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1355012AbiDOPYh (ORCPT ); Fri, 15 Apr 2022 11:24:37 -0400 Received: from relay1-d.mail.gandi.net (relay1-d.mail.gandi.net [IPv6:2001:4b98:dc4:8::221]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id C9A5BD0816; Fri, 15 Apr 2022 08:22:05 -0700 (PDT) Received: (Authenticated sender: paul.kocialkowski@bootlin.com) by mail.gandi.net (Postfix) with ESMTPSA id C48F424000B; Fri, 15 Apr 2022 15:22:02 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bootlin.com; s=gm1; t=1650036124; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding: in-reply-to:in-reply-to:references:references; bh=FK8arK2x+Qxc+gz/abj3rVz/2+9S6LmKDQQzh8/ySlE=; b=mpMfeWAKdMrJ2O+Sogt2d3v3gS75EkjbPRc0zus4d9cTyYO0yzAouD8BoCZaqgEYcUpPYA HRi/fa5MvAKUVKhHZvHvT0AT9npuKfB3+Ax4qBgp+dNzKRQDl6sKgWBVejKqCed5gv5dks bUXAG0vV+/vKxTvRt6wh/hZ8LlZTDDab8BuRt6h8xzub1qA3jSgHiCV+7ImxL4PY/y+UWF E+3eJukkMv02KWqsxugsQ+uGQEaMr8340ruT48YwtMpM/KhSk335YBqJNFycXW4QGGfi0i YQUrwSguWgtWYPi53j6fUMiTsEzo4pwWrjcnKzolt0tpJSt4et6jA2hHJxMtiA== From: Paul Kocialkowski To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org Cc: Yong Deng , Mauro Carvalho Chehab , Rob Herring , Chen-Yu Tsai , Jernej Skrabec , Samuel Holland , Sakari Ailus , Hans Verkuil , Laurent Pinchart , Paul Kocialkowski , Kishon Vijay Abraham I , Vinod Koul , Maxime Ripard , Thomas Petazzoni Subject: [PATCH v4 6/8] MAINTAINERS: Add entry for the Allwinner A31 MIPI CSI-2 bridge driver Date: Fri, 15 Apr 2022 17:21:36 +0200 Message-Id: <20220415152138.635525-7-paul.kocialkowski@bootlin.com> X-Mailer: git-send-email 2.35.2 In-Reply-To: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> References: <20220415152138.635525-1-paul.kocialkowski@bootlin.com> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add myself as maintainer of the Allwinner A31 MIPI CSI-2 bridge media driver. Signed-off-by: Paul Kocialkowski Acked-by: Jernej Skrabec --- MAINTAINERS | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index fd768d43e048..0c7a3c792837 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -761,6 +761,14 @@ T: git git://linuxtv.org/media_tree.git F: Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml F: drivers/media/platform/sunxi/sun4i-csi/ +ALLWINNER A31 MIPI CSI-2 BRIDGE DRIVER +M: Paul Kocialkowski +L: linux-media@vger.kernel.org +S: Maintained +T: git git://linuxtv.org/media_tree.git +F: Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml +F: drivers/media/platform/sunxi/sun6i-mipi-csi2/ + ALLWINNER CPUFREQ DRIVER M: Yangtao Li L: linux-pm@vger.kernel.org