From patchwork Mon Nov 15 18:19:11 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 518828 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 48F91C433EF for ; Tue, 16 Nov 2021 01:43:36 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 32D2A61A4E for ; Tue, 16 Nov 2021 01:43:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1349214AbhKPBq0 (ORCPT ); Mon, 15 Nov 2021 20:46:26 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:45068 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241609AbhKOSYO (ORCPT ); Mon, 15 Nov 2021 13:24:14 -0500 From: Serge Semin Authentication-Results: mail.baikalelectronics.ru; dkim=permerror (bad message/signature format) To: Serge Semin , Mark Brown , Nandhini Srikandan , Andy Shevchenko CC: Serge Semin , Andy Shevchenko , Andy Shevchenko , , Subject: [PATCH v3 1/7] spi: dw: Add a symbols namespace for the core module Date: Mon, 15 Nov 2021 21:19:11 +0300 Message-ID: <20211115181917.7521-2-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> References: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The exported from the DW SPI driver core/DMA symbols are only used by the spi-dw-{mmio,pci,bt1}.o objects. Add these symbols to a separate namespace then and make sure the depended modules have it imported. Signed-off-by: Serge Semin Suggested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko --- Changelog v2: - This is a new patch created as of Andy' suggestion. Changelog v3: - Discard the symbols importing from the spi-dw-dma object since it's linked into the spi-dw-core module anyway thus having the same symbols namespace. --- drivers/spi/spi-dw-bt1.c | 1 + drivers/spi/spi-dw-core.c | 14 +++++++------- drivers/spi/spi-dw-dma.c | 5 +++-- drivers/spi/spi-dw-mmio.c | 1 + drivers/spi/spi-dw-pci.c | 1 + 5 files changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi-dw-bt1.c b/drivers/spi/spi-dw-bt1.c index 5be6b7b80c21..ac7e4f30d1da 100644 --- a/drivers/spi/spi-dw-bt1.c +++ b/drivers/spi/spi-dw-bt1.c @@ -339,3 +339,4 @@ module_platform_driver(dw_spi_bt1_driver); MODULE_AUTHOR("Serge Semin "); MODULE_DESCRIPTION("Baikal-T1 System Boot SPI Controller driver"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(SPI_DW_CORE); diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index a305074c482e..a14940403ab4 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -106,7 +106,7 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable) else dw_writel(dws, DW_SPI_SER, 0); } -EXPORT_SYMBOL_GPL(dw_spi_set_cs); +EXPORT_SYMBOL_NS_GPL(dw_spi_set_cs, SPI_DW_CORE); /* Return the max entries we can fill into tx fifo */ static inline u32 tx_max(struct dw_spi *dws) @@ -210,7 +210,7 @@ int dw_spi_check_status(struct dw_spi *dws, bool raw) return ret; } -EXPORT_SYMBOL_GPL(dw_spi_check_status); +EXPORT_SYMBOL_NS_GPL(dw_spi_check_status, SPI_DW_CORE); static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws) { @@ -345,7 +345,7 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, dws->cur_rx_sample_dly = chip->rx_sample_dly; } } -EXPORT_SYMBOL_GPL(dw_spi_update_config); +EXPORT_SYMBOL_NS_GPL(dw_spi_update_config, SPI_DW_CORE); static void dw_spi_irq_setup(struct dw_spi *dws) { @@ -945,7 +945,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) spi_controller_put(master); return ret; } -EXPORT_SYMBOL_GPL(dw_spi_add_host); +EXPORT_SYMBOL_NS_GPL(dw_spi_add_host, SPI_DW_CORE); void dw_spi_remove_host(struct dw_spi *dws) { @@ -960,7 +960,7 @@ void dw_spi_remove_host(struct dw_spi *dws) free_irq(dws->irq, dws->master); } -EXPORT_SYMBOL_GPL(dw_spi_remove_host); +EXPORT_SYMBOL_NS_GPL(dw_spi_remove_host, SPI_DW_CORE); int dw_spi_suspend_host(struct dw_spi *dws) { @@ -973,14 +973,14 @@ int dw_spi_suspend_host(struct dw_spi *dws) spi_shutdown_chip(dws); return 0; } -EXPORT_SYMBOL_GPL(dw_spi_suspend_host); +EXPORT_SYMBOL_NS_GPL(dw_spi_suspend_host, SPI_DW_CORE); int dw_spi_resume_host(struct dw_spi *dws) { spi_hw_init(&dws->master->dev, dws); return spi_controller_resume(dws->master); } -EXPORT_SYMBOL_GPL(dw_spi_resume_host); +EXPORT_SYMBOL_NS_GPL(dw_spi_resume_host, SPI_DW_CORE); MODULE_AUTHOR("Feng Tang "); MODULE_DESCRIPTION("Driver for DesignWare SPI controller core"); diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c index a09831c62192..ca199eee0f13 100644 --- a/drivers/spi/spi-dw-dma.c +++ b/drivers/spi/spi-dw-dma.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -638,7 +639,7 @@ void dw_spi_dma_setup_mfld(struct dw_spi *dws) { dws->dma_ops = &dw_spi_dma_mfld_ops; } -EXPORT_SYMBOL_GPL(dw_spi_dma_setup_mfld); +EXPORT_SYMBOL_NS_GPL(dw_spi_dma_setup_mfld, SPI_DW_CORE); static const struct dw_spi_dma_ops dw_spi_dma_generic_ops = { .dma_init = dw_spi_dma_init_generic, @@ -653,4 +654,4 @@ void dw_spi_dma_setup_generic(struct dw_spi *dws) { dws->dma_ops = &dw_spi_dma_generic_ops; } -EXPORT_SYMBOL_GPL(dw_spi_dma_setup_generic); +EXPORT_SYMBOL_NS_GPL(dw_spi_dma_setup_generic, SPI_DW_CORE); diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 17c06039a74d..711f4d3404c5 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -377,3 +377,4 @@ module_platform_driver(dw_spi_mmio_driver); MODULE_AUTHOR("Jean-Hugues Deschenes "); MODULE_DESCRIPTION("Memory-mapped I/O interface driver for DW SPI Core"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(SPI_DW_CORE); diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 8a91cd58102f..5552240fee55 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -213,3 +213,4 @@ module_pci_driver(dw_spi_driver); MODULE_AUTHOR("Feng Tang "); MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); MODULE_LICENSE("GPL v2"); +MODULE_IMPORT_NS(SPI_DW_CORE); From patchwork Mon Nov 15 18:19:12 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 517737 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 2DE08C433FE for ; Tue, 16 Nov 2021 01:43:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 172A861C15 for ; Tue, 16 Nov 2021 01:43:37 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1357842AbhKPBq1 (ORCPT ); Mon, 15 Nov 2021 20:46:27 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:45074 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241610AbhKOSYY (ORCPT ); Mon, 15 Nov 2021 13:24:24 -0500 From: Serge Semin Authentication-Results: mail.baikalelectronics.ru; dkim=permerror (bad message/signature format) To: Serge Semin , Mark Brown , Nandhini Srikandan , Andy Shevchenko CC: Serge Semin , Andy Shevchenko , Andy Shevchenko , , Subject: [PATCH v3 2/7] spi: dw: Discard redundant DW SSI Frame Formats enumeration Date: Mon, 15 Nov 2021 21:19:12 +0300 Message-ID: <20211115181917.7521-3-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> References: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The dw_ssi_type enumeration describes the SPI frame formats the controller supports, like Motorola SPI, Texas Instruments SSP and National Semiconductors Microwire, that is the serial protocol utilized for the SPI-transfers. Depending on the DW SSI IP-core configuration the protocol could be either fixed or selectable. If it is changebale the protocol can be selected by means of the CTRL0.FRF field, which possible values encoded by the dw_ssi_type enumeration. Aside with the denoted enum the field values are also described by a set of SPI_FRF_{SPI,SSP,MICROWIRE} macros. Thus currently the DW SPI driver has got two entities describing the same data. Let's get rid of the enumeration one then, since first it hasn't been used as enumeration-type but merely as a parametrized values set and second that would unify the macro-based CSR read/write interface of the driver. While at it convert the macro names to be more descriptive about the protocols they represent. Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko --- drivers/spi/spi-dw-core.c | 4 ++-- drivers/spi/spi-dw.h | 12 +++--------- 2 files changed, 5 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index a14940403ab4..da6100fd185f 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -273,7 +273,7 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi) if (!(dws->caps & DW_SPI_CAP_DWC_SSI)) { /* CTRLR0[ 5: 4] Frame Format */ - cr0 |= SSI_MOTO_SPI << SPI_FRF_OFFSET; + cr0 |= SPI_FRF_MOTO_SPI << SPI_FRF_OFFSET; /* * SPI mode (SCPOL|SCPH) @@ -287,7 +287,7 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi) cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET; } else { /* CTRLR0[ 7: 6] Frame Format */ - cr0 |= SSI_MOTO_SPI << DWC_SSI_CTRLR0_FRF_OFFSET; + cr0 |= SPI_FRF_MOTO_SPI << DWC_SSI_CTRLR0_FRF_OFFSET; /* * SPI mode (SCPOL|SCPH) diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index b665e040862c..467c342bfe56 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -46,9 +46,9 @@ #define SPI_DFS32_OFFSET 16 #define SPI_FRF_OFFSET 4 -#define SPI_FRF_SPI 0x0 -#define SPI_FRF_SSP 0x1 -#define SPI_FRF_MICROWIRE 0x2 +#define SPI_FRF_MOTO_SPI 0x0 +#define SPI_FRF_TI_SSP 0x1 +#define SPI_FRF_NS_MICROWIRE 0x2 #define SPI_FRF_RESV 0x3 #define SPI_MODE_OFFSET 6 @@ -114,12 +114,6 @@ #define SPI_GET_BYTE(_val, _idx) \ ((_val) >> (BITS_PER_BYTE * (_idx)) & 0xff) -enum dw_ssi_type { - SSI_MOTO_SPI = 0, - SSI_TI_SSP, - SSI_NS_MICROWIRE, -}; - /* DW SPI capabilities */ #define DW_SPI_CAP_CS_OVERRIDE BIT(0) #define DW_SPI_CAP_KEEMBAY_MST BIT(1) From patchwork Mon Nov 15 18:19:13 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 518829 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7ED04C433FE for ; Mon, 15 Nov 2021 18:25:07 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 6432B6342E for ; Mon, 15 Nov 2021 18:25:07 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241542AbhKOS1r (ORCPT ); Mon, 15 Nov 2021 13:27:47 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:45106 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241611AbhKOSY3 (ORCPT ); Mon, 15 Nov 2021 13:24:29 -0500 From: Serge Semin Authentication-Results: mail.baikalelectronics.ru; dkim=permerror (bad message/signature format) To: Serge Semin , Mark Brown , Nandhini Srikandan , Andy Shevchenko CC: Serge Semin , Andy Shevchenko , Andy Shevchenko , , Subject: [PATCH v3 3/7] spi: dw: Put the driver entities naming in order Date: Mon, 15 Nov 2021 21:19:13 +0300 Message-ID: <20211115181917.7521-4-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> References: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Mostly due to a long driver history it's methods and macro names look a bit messy. In particularly that concerns the code their prefixes. A biggest part of the driver functions and macros have got the dw_spi/DW_SPI prefixes. But there are some entities which have been just "spi_/SPI_"-prefixed. Especially that concerns the CSR and their fields macro definitions. It makes the code harder to comprehend since such methods and macros can be easily confused with the global SPI-subsystem exports. In this case the only possible way to more or less quickly distinguish one naming space from another is either by context or by the argument type, which most of the times isn't that easy anyway. In addition to that a new DW SSI IP-core support has been added in the framework of commit e539f435cb9c ("spi: dw: Add support for DesignWare DWC_ssi"), which introduced a new set or macro-prefixes to describe CTRLR0-specific fields and worsen the situation. Finally there are methods with no DW SPI driver-reference prefix at all, that make the code reading even harder. So in order to ease the driver hacking let's bring the code naming to a common base: 1) Each method is supposed to have "dw_spi_" prefix so to be easily distinguished from the kernel API, e.g. SPI-subsystem methods and macros. (Exception is the local implementation of the readl/writel methods since being just the regspace accessors.) 2) Each generically used macro should have DW_SPI_-prefix thus being easily comprehended as the local driver definition. 3) DW APB SSI and DW SSI specific macros should have prefixes as DW_PSSI_ and DW_HSSI_ respectively so referring to the system buses they support (APB and AHB similarly to the DT clocks naming like pclk, hclk). Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko --- Folks, any ideas of a better naming scheme especially for the DW APB SSI and DW SSI specific macros are very welcome. Changelog v2: - Replace "assi" suffixes with "pssi" in the spi-dw-mmio.c methods. (Thanks Andy for noticing this pity mistake) --- drivers/spi/spi-dw-bt1.c | 8 +-- drivers/spi/spi-dw-core.c | 138 ++++++++++++++++++------------------ drivers/spi/spi-dw-dma.c | 50 ++++++------- drivers/spi/spi-dw-mmio.c | 20 +++--- drivers/spi/spi-dw-pci.c | 59 ++++++++-------- drivers/spi/spi-dw.h | 145 +++++++++++++++++++------------------- 6 files changed, 211 insertions(+), 209 deletions(-) diff --git a/drivers/spi/spi-dw-bt1.c b/drivers/spi/spi-dw-bt1.c index ac7e4f30d1da..c06553416123 100644 --- a/drivers/spi/spi-dw-bt1.c +++ b/drivers/spi/spi-dw-bt1.c @@ -123,7 +123,7 @@ static ssize_t dw_spi_bt1_dirmap_read(struct spi_mem_dirmap_desc *desc, len = min_t(size_t, len, dwsbt1->map_len - offs); /* Collect the controller configuration required by the operation */ - cfg.tmode = SPI_TMOD_EPROMREAD; + cfg.tmode = DW_SPI_CTRLR0_TMOD_EPROMREAD; cfg.dfs = 8; cfg.ndf = 4; cfg.freq = mem->spi->max_speed_hz; @@ -131,13 +131,13 @@ static ssize_t dw_spi_bt1_dirmap_read(struct spi_mem_dirmap_desc *desc, /* Make sure the corresponding CS is de-asserted on transmission */ dw_spi_set_cs(mem->spi, false); - spi_enable_chip(dws, 0); + dw_spi_enable_chip(dws, 0); dw_spi_update_config(dws, mem->spi, &cfg); - spi_umask_intr(dws, SPI_INT_RXFI); + dw_spi_umask_intr(dws, DW_SPI_INT_RXFI); - spi_enable_chip(dws, 1); + dw_spi_enable_chip(dws, 1); /* * Enable the transparent mode of the System Boot Controller. diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index da6100fd185f..57bbffe6d6f9 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -24,7 +24,7 @@ #endif /* Slave spi_device related */ -struct chip_data { +struct dw_spi_chip_data { u32 cr0; u32 rx_sample_dly; /* RX sample delay */ }; @@ -109,7 +109,7 @@ void dw_spi_set_cs(struct spi_device *spi, bool enable) EXPORT_SYMBOL_NS_GPL(dw_spi_set_cs, SPI_DW_CORE); /* Return the max entries we can fill into tx fifo */ -static inline u32 tx_max(struct dw_spi *dws) +static inline u32 dw_spi_tx_max(struct dw_spi *dws) { u32 tx_room, rxtx_gap; @@ -129,14 +129,14 @@ static inline u32 tx_max(struct dw_spi *dws) } /* Return the max entries we should read out of rx fifo */ -static inline u32 rx_max(struct dw_spi *dws) +static inline u32 dw_spi_rx_max(struct dw_spi *dws) { return min_t(u32, dws->rx_len, dw_readl(dws, DW_SPI_RXFLR)); } static void dw_writer(struct dw_spi *dws) { - u32 max = tx_max(dws); + u32 max = dw_spi_tx_max(dws); u32 txw = 0; while (max--) { @@ -157,7 +157,7 @@ static void dw_writer(struct dw_spi *dws) static void dw_reader(struct dw_spi *dws) { - u32 max = rx_max(dws); + u32 max = dw_spi_rx_max(dws); u32 rxw; while (max--) { @@ -186,24 +186,24 @@ int dw_spi_check_status(struct dw_spi *dws, bool raw) else irq_status = dw_readl(dws, DW_SPI_ISR); - if (irq_status & SPI_INT_RXOI) { + if (irq_status & DW_SPI_INT_RXOI) { dev_err(&dws->master->dev, "RX FIFO overflow detected\n"); ret = -EIO; } - if (irq_status & SPI_INT_RXUI) { + if (irq_status & DW_SPI_INT_RXUI) { dev_err(&dws->master->dev, "RX FIFO underflow detected\n"); ret = -EIO; } - if (irq_status & SPI_INT_TXOI) { + if (irq_status & DW_SPI_INT_TXOI) { dev_err(&dws->master->dev, "TX FIFO overflow detected\n"); ret = -EIO; } /* Generically handle the erroneous situation */ if (ret) { - spi_reset_chip(dws); + dw_spi_reset_chip(dws); if (dws->master->cur_msg) dws->master->cur_msg->status = ret; } @@ -230,7 +230,7 @@ static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws) */ dw_reader(dws); if (!dws->rx_len) { - spi_mask_intr(dws, 0xff); + dw_spi_mask_intr(dws, 0xff); spi_finalize_current_transfer(dws->master); } else if (dws->rx_len <= dw_readl(dws, DW_SPI_RXFTLR)) { dw_writel(dws, DW_SPI_RXFTLR, dws->rx_len - 1); @@ -241,10 +241,10 @@ static irqreturn_t dw_spi_transfer_handler(struct dw_spi *dws) * disabled after the data transmission is finished so not to * have the TXE IRQ flood at the final stage of the transfer. */ - if (irq_status & SPI_INT_TXEI) { + if (irq_status & DW_SPI_INT_TXEI) { dw_writer(dws); if (!dws->tx_len) - spi_mask_intr(dws, SPI_INT_TXEI); + dw_spi_mask_intr(dws, DW_SPI_INT_TXEI); } return IRQ_HANDLED; @@ -260,7 +260,7 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) return IRQ_NONE; if (!master->cur_msg) { - spi_mask_intr(dws, 0xff); + dw_spi_mask_intr(dws, 0xff); return IRQ_HANDLED; } @@ -271,37 +271,37 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi) { u32 cr0 = 0; - if (!(dws->caps & DW_SPI_CAP_DWC_SSI)) { + if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) { /* CTRLR0[ 5: 4] Frame Format */ - cr0 |= SPI_FRF_MOTO_SPI << SPI_FRF_OFFSET; + cr0 |= DW_SPI_CTRLR0_FRF_MOTO_SPI << DW_PSSI_CTRLR0_FRF_OFFSET; /* * SPI mode (SCPOL|SCPH) * CTRLR0[ 6] Serial Clock Phase * CTRLR0[ 7] Serial Clock Polarity */ - cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << SPI_SCOL_OFFSET; - cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << SPI_SCPH_OFFSET; + cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DW_PSSI_CTRLR0_SCOL_OFFSET; + cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DW_PSSI_CTRLR0_SCPH_OFFSET; /* CTRLR0[11] Shift Register Loop */ - cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << SPI_SRL_OFFSET; + cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DW_PSSI_CTRLR0_SRL_OFFSET; } else { /* CTRLR0[ 7: 6] Frame Format */ - cr0 |= SPI_FRF_MOTO_SPI << DWC_SSI_CTRLR0_FRF_OFFSET; + cr0 |= DW_SPI_CTRLR0_FRF_MOTO_SPI << DW_HSSI_CTRLR0_FRF_OFFSET; /* * SPI mode (SCPOL|SCPH) * CTRLR0[ 8] Serial Clock Phase * CTRLR0[ 9] Serial Clock Polarity */ - cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DWC_SSI_CTRLR0_SCPOL_OFFSET; - cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DWC_SSI_CTRLR0_SCPH_OFFSET; + cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DW_HSSI_CTRLR0_SCPOL_OFFSET; + cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DW_HSSI_CTRLR0_SCPH_OFFSET; /* CTRLR0[13] Shift Register Loop */ - cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DWC_SSI_CTRLR0_SRL_OFFSET; + cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DW_HSSI_CTRLR0_SRL_OFFSET; if (dws->caps & DW_SPI_CAP_KEEMBAY_MST) - cr0 |= DWC_SSI_CTRLR0_KEEMBAY_MST; + cr0 |= DW_HSSI_CTRLR0_KEEMBAY_MST; } return cr0; @@ -310,7 +310,7 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi) void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, struct dw_spi_cfg *cfg) { - struct chip_data *chip = spi_get_ctldata(spi); + struct dw_spi_chip_data *chip = spi_get_ctldata(spi); u32 cr0 = chip->cr0; u32 speed_hz; u16 clk_div; @@ -318,16 +318,17 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, /* CTRLR0[ 4/3: 0] or CTRLR0[ 20: 16] Data Frame Size */ cr0 |= (cfg->dfs - 1) << dws->dfs_offset; - if (!(dws->caps & DW_SPI_CAP_DWC_SSI)) + if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) /* CTRLR0[ 9:8] Transfer Mode */ - cr0 |= cfg->tmode << SPI_TMOD_OFFSET; + cr0 |= cfg->tmode << DW_PSSI_CTRLR0_TMOD_OFFSET; else /* CTRLR0[11:10] Transfer Mode */ - cr0 |= cfg->tmode << DWC_SSI_CTRLR0_TMOD_OFFSET; + cr0 |= cfg->tmode << DW_HSSI_CTRLR0_TMOD_OFFSET; dw_writel(dws, DW_SPI_CTRLR0, cr0); - if (cfg->tmode == SPI_TMOD_EPROMREAD || cfg->tmode == SPI_TMOD_RO) + if (cfg->tmode == DW_SPI_CTRLR0_TMOD_EPROMREAD || + cfg->tmode == DW_SPI_CTRLR0_TMOD_RO) dw_writel(dws, DW_SPI_CTRLR1, cfg->ndf ? cfg->ndf - 1 : 0); /* Note DW APB SSI clock divider doesn't support odd numbers */ @@ -335,7 +336,7 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, speed_hz = dws->max_freq / clk_div; if (dws->current_freq != speed_hz) { - spi_set_clk(dws, clk_div); + dw_spi_set_clk(dws, clk_div); dws->current_freq = speed_hz; } @@ -363,9 +364,9 @@ static void dw_spi_irq_setup(struct dw_spi *dws) dws->transfer_handler = dw_spi_transfer_handler; - imask = SPI_INT_TXEI | SPI_INT_TXOI | SPI_INT_RXUI | SPI_INT_RXOI | - SPI_INT_RXFI; - spi_umask_intr(dws, imask); + imask = DW_SPI_INT_TXEI | DW_SPI_INT_TXOI | + DW_SPI_INT_RXUI | DW_SPI_INT_RXOI | DW_SPI_INT_RXFI; + dw_spi_umask_intr(dws, imask); } /* @@ -405,11 +406,12 @@ static int dw_spi_poll_transfer(struct dw_spi *dws, } static int dw_spi_transfer_one(struct spi_controller *master, - struct spi_device *spi, struct spi_transfer *transfer) + struct spi_device *spi, + struct spi_transfer *transfer) { struct dw_spi *dws = spi_controller_get_devdata(master); struct dw_spi_cfg cfg = { - .tmode = SPI_TMOD_TR, + .tmode = DW_SPI_CTRLR0_TMOD_TR, .dfs = transfer->bits_per_word, .freq = transfer->speed_hz, }; @@ -425,7 +427,7 @@ static int dw_spi_transfer_one(struct spi_controller *master, /* Ensure the data above is visible for all CPUs */ smp_mb(); - spi_enable_chip(dws, 0); + dw_spi_enable_chip(dws, 0); dw_spi_update_config(dws, spi, &cfg); @@ -436,7 +438,7 @@ static int dw_spi_transfer_one(struct spi_controller *master, dws->dma_mapped = master->cur_msg_mapped; /* For poll mode just disable all interrupts */ - spi_mask_intr(dws, 0xff); + dw_spi_mask_intr(dws, 0xff); if (dws->dma_mapped) { ret = dws->dma_ops->dma_setup(dws, transfer); @@ -444,7 +446,7 @@ static int dw_spi_transfer_one(struct spi_controller *master, return ret; } - spi_enable_chip(dws, 1); + dw_spi_enable_chip(dws, 1); if (dws->dma_mapped) return dws->dma_ops->dma_transfer(dws, transfer); @@ -457,20 +459,20 @@ static int dw_spi_transfer_one(struct spi_controller *master, } static void dw_spi_handle_err(struct spi_controller *master, - struct spi_message *msg) + struct spi_message *msg) { struct dw_spi *dws = spi_controller_get_devdata(master); if (dws->dma_mapped) dws->dma_ops->dma_stop(dws); - spi_reset_chip(dws); + dw_spi_reset_chip(dws); } static int dw_spi_adjust_mem_op_size(struct spi_mem *mem, struct spi_mem_op *op) { if (op->data.dir == SPI_MEM_DATA_IN) - op->data.nbytes = clamp_val(op->data.nbytes, 0, SPI_NDF_MASK + 1); + op->data.nbytes = clamp_val(op->data.nbytes, 0, DW_SPI_NDF_MASK + 1); return 0; } @@ -498,7 +500,7 @@ static int dw_spi_init_mem_buf(struct dw_spi *dws, const struct spi_mem_op *op) if (op->data.dir == SPI_MEM_DATA_OUT) len += op->data.nbytes; - if (len <= SPI_BUF_SIZE) { + if (len <= DW_SPI_BUF_SIZE) { out = dws->buf; } else { out = kzalloc(len, GFP_KERNEL); @@ -512,9 +514,9 @@ static int dw_spi_init_mem_buf(struct dw_spi *dws, const struct spi_mem_op *op) * single buffer in order to speed the data transmission up. */ for (i = 0; i < op->cmd.nbytes; ++i) - out[i] = SPI_GET_BYTE(op->cmd.opcode, op->cmd.nbytes - i - 1); + out[i] = DW_SPI_GET_BYTE(op->cmd.opcode, op->cmd.nbytes - i - 1); for (j = 0; j < op->addr.nbytes; ++i, ++j) - out[i] = SPI_GET_BYTE(op->addr.val, op->addr.nbytes - j - 1); + out[i] = DW_SPI_GET_BYTE(op->addr.val, op->addr.nbytes - j - 1); for (j = 0; j < op->dummy.nbytes; ++i, ++j) out[i] = 0x0; @@ -587,7 +589,7 @@ static int dw_spi_write_then_read(struct dw_spi *dws, struct spi_device *spi) entries = readl_relaxed(dws->regs + DW_SPI_RXFLR); if (!entries) { sts = readl_relaxed(dws->regs + DW_SPI_RISR); - if (sts & SPI_INT_RXOI) { + if (sts & DW_SPI_INT_RXOI) { dev_err(&dws->master->dev, "FIFO overflow on Rx\n"); return -EIO; } @@ -603,12 +605,12 @@ static int dw_spi_write_then_read(struct dw_spi *dws, struct spi_device *spi) static inline bool dw_spi_ctlr_busy(struct dw_spi *dws) { - return dw_readl(dws, DW_SPI_SR) & SR_BUSY; + return dw_readl(dws, DW_SPI_SR) & DW_SPI_SR_BUSY; } static int dw_spi_wait_mem_op_done(struct dw_spi *dws) { - int retry = SPI_WAIT_RETRIES; + int retry = DW_SPI_WAIT_RETRIES; struct spi_delay delay; unsigned long ns, us; u32 nents; @@ -638,9 +640,9 @@ static int dw_spi_wait_mem_op_done(struct dw_spi *dws) static void dw_spi_stop_mem_op(struct dw_spi *dws, struct spi_device *spi) { - spi_enable_chip(dws, 0); + dw_spi_enable_chip(dws, 0); dw_spi_set_cs(spi, true); - spi_enable_chip(dws, 1); + dw_spi_enable_chip(dws, 1); } /* @@ -673,19 +675,19 @@ static int dw_spi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) cfg.dfs = 8; cfg.freq = clamp(mem->spi->max_speed_hz, 0U, dws->max_mem_freq); if (op->data.dir == SPI_MEM_DATA_IN) { - cfg.tmode = SPI_TMOD_EPROMREAD; + cfg.tmode = DW_SPI_CTRLR0_TMOD_EPROMREAD; cfg.ndf = op->data.nbytes; } else { - cfg.tmode = SPI_TMOD_TO; + cfg.tmode = DW_SPI_CTRLR0_TMOD_TO; } - spi_enable_chip(dws, 0); + dw_spi_enable_chip(dws, 0); dw_spi_update_config(dws, mem->spi, &cfg); - spi_mask_intr(dws, 0xff); + dw_spi_mask_intr(dws, 0xff); - spi_enable_chip(dws, 1); + dw_spi_enable_chip(dws, 1); /* * DW APB SSI controller has very nasty peculiarities. First originally @@ -768,7 +770,7 @@ static void dw_spi_init_mem_ops(struct dw_spi *dws) static int dw_spi_setup(struct spi_device *spi) { struct dw_spi *dws = spi_controller_get_devdata(spi->controller); - struct chip_data *chip; + struct dw_spi_chip_data *chip; /* Only alloc on first setup */ chip = spi_get_ctldata(spi); @@ -776,7 +778,7 @@ static int dw_spi_setup(struct spi_device *spi) struct dw_spi *dws = spi_controller_get_devdata(spi->controller); u32 rx_sample_dly_ns; - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); + chip = kzalloc(sizeof(*chip), GFP_KERNEL); if (!chip) return -ENOMEM; spi_set_ctldata(spi, chip); @@ -803,16 +805,16 @@ static int dw_spi_setup(struct spi_device *spi) static void dw_spi_cleanup(struct spi_device *spi) { - struct chip_data *chip = spi_get_ctldata(spi); + struct dw_spi_chip_data *chip = spi_get_ctldata(spi); kfree(chip); spi_set_ctldata(spi, NULL); } /* Restart the controller, disable all interrupts, clean rx fifo */ -static void spi_hw_init(struct device *dev, struct dw_spi *dws) +static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws) { - spi_reset_chip(dws); + dw_spi_reset_chip(dws); /* * Try to detect the FIFO depth if not set by interface driver, @@ -837,18 +839,18 @@ static void spi_hw_init(struct device *dev, struct dw_spi *dws) * writability. Note DWC SSI controller also has the extended DFS, but * with zero offset. */ - if (!(dws->caps & DW_SPI_CAP_DWC_SSI)) { + if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) { u32 cr0, tmp = dw_readl(dws, DW_SPI_CTRLR0); - spi_enable_chip(dws, 0); + dw_spi_enable_chip(dws, 0); dw_writel(dws, DW_SPI_CTRLR0, 0xffffffff); cr0 = dw_readl(dws, DW_SPI_CTRLR0); dw_writel(dws, DW_SPI_CTRLR0, tmp); - spi_enable_chip(dws, 1); + dw_spi_enable_chip(dws, 1); - if (!(cr0 & SPI_DFS_MASK)) { + if (!(cr0 & DW_PSSI_CTRLR0_DFS_MASK)) { dws->caps |= DW_SPI_CAP_DFS32; - dws->dfs_offset = SPI_DFS32_OFFSET; + dws->dfs_offset = DW_PSSI_CTRLR0_DFS32_OFFSET; dev_dbg(dev, "Detected 32-bits max data frame size\n"); } } else { @@ -878,7 +880,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) spi_controller_set_devdata(master, dws); /* Basic HW init */ - spi_hw_init(dev, dws); + dw_spi_hw_init(dev, dws); ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dev_name(dev), master); @@ -939,7 +941,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws) err_dma_exit: if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); - spi_enable_chip(dws, 0); + dw_spi_enable_chip(dws, 0); free_irq(dws->irq, master); err_free_master: spi_controller_put(master); @@ -956,7 +958,7 @@ void dw_spi_remove_host(struct dw_spi *dws) if (dws->dma_ops && dws->dma_ops->dma_exit) dws->dma_ops->dma_exit(dws); - spi_shutdown_chip(dws); + dw_spi_shutdown_chip(dws); free_irq(dws->irq, dws->master); } @@ -970,14 +972,14 @@ int dw_spi_suspend_host(struct dw_spi *dws) if (ret) return ret; - spi_shutdown_chip(dws); + dw_spi_shutdown_chip(dws); return 0; } EXPORT_SYMBOL_NS_GPL(dw_spi_suspend_host, SPI_DW_CORE); int dw_spi_resume_host(struct dw_spi *dws) { - spi_hw_init(&dws->master->dev, dws); + dw_spi_hw_init(&dws->master->dev, dws); return spi_controller_resume(dws->master); } EXPORT_SYMBOL_NS_GPL(dw_spi_resume_host, SPI_DW_CORE); diff --git a/drivers/spi/spi-dw-dma.c b/drivers/spi/spi-dw-dma.c index ca199eee0f13..63e5260100ec 100644 --- a/drivers/spi/spi-dw-dma.c +++ b/drivers/spi/spi-dw-dma.c @@ -18,10 +18,10 @@ #include "spi-dw.h" -#define RX_BUSY 0 -#define RX_BURST_LEVEL 16 -#define TX_BUSY 1 -#define TX_BURST_LEVEL 16 +#define DW_SPI_RX_BUSY 0 +#define DW_SPI_RX_BURST_LEVEL 16 +#define DW_SPI_TX_BUSY 1 +#define DW_SPI_TX_BURST_LEVEL 16 static bool dw_spi_dma_chan_filter(struct dma_chan *chan, void *param) { @@ -46,7 +46,7 @@ static void dw_spi_dma_maxburst_init(struct dw_spi *dws) if (!ret && caps.max_burst) max_burst = caps.max_burst; else - max_burst = RX_BURST_LEVEL; + max_burst = DW_SPI_RX_BURST_LEVEL; dws->rxburst = min(max_burst, def_burst); dw_writel(dws, DW_SPI_DMARDLR, dws->rxburst - 1); @@ -55,7 +55,7 @@ static void dw_spi_dma_maxburst_init(struct dw_spi *dws) if (!ret && caps.max_burst) max_burst = caps.max_burst; else - max_burst = TX_BURST_LEVEL; + max_burst = DW_SPI_TX_BURST_LEVEL; /* * Having a Rx DMA channel serviced with higher priority than a Tx DMA @@ -227,13 +227,13 @@ static int dw_spi_dma_wait(struct dw_spi *dws, unsigned int len, u32 speed) static inline bool dw_spi_dma_tx_busy(struct dw_spi *dws) { - return !(dw_readl(dws, DW_SPI_SR) & SR_TF_EMPT); + return !(dw_readl(dws, DW_SPI_SR) & DW_SPI_SR_TF_EMPT); } static int dw_spi_dma_wait_tx_done(struct dw_spi *dws, struct spi_transfer *xfer) { - int retry = SPI_WAIT_RETRIES; + int retry = DW_SPI_WAIT_RETRIES; struct spi_delay delay; u32 nents; @@ -260,8 +260,8 @@ static void dw_spi_dma_tx_done(void *arg) { struct dw_spi *dws = arg; - clear_bit(TX_BUSY, &dws->dma_chan_busy); - if (test_bit(RX_BUSY, &dws->dma_chan_busy)) + clear_bit(DW_SPI_TX_BUSY, &dws->dma_chan_busy); + if (test_bit(DW_SPI_RX_BUSY, &dws->dma_chan_busy)) return; complete(&dws->dma_completion); @@ -305,19 +305,19 @@ static int dw_spi_dma_submit_tx(struct dw_spi *dws, struct scatterlist *sgl, return ret; } - set_bit(TX_BUSY, &dws->dma_chan_busy); + set_bit(DW_SPI_TX_BUSY, &dws->dma_chan_busy); return 0; } static inline bool dw_spi_dma_rx_busy(struct dw_spi *dws) { - return !!(dw_readl(dws, DW_SPI_SR) & SR_RF_NOT_EMPT); + return !!(dw_readl(dws, DW_SPI_SR) & DW_SPI_SR_RF_NOT_EMPT); } static int dw_spi_dma_wait_rx_done(struct dw_spi *dws) { - int retry = SPI_WAIT_RETRIES; + int retry = DW_SPI_WAIT_RETRIES; struct spi_delay delay; unsigned long ns, us; u32 nents; @@ -361,8 +361,8 @@ static void dw_spi_dma_rx_done(void *arg) { struct dw_spi *dws = arg; - clear_bit(RX_BUSY, &dws->dma_chan_busy); - if (test_bit(TX_BUSY, &dws->dma_chan_busy)) + clear_bit(DW_SPI_RX_BUSY, &dws->dma_chan_busy); + if (test_bit(DW_SPI_TX_BUSY, &dws->dma_chan_busy)) return; complete(&dws->dma_completion); @@ -406,7 +406,7 @@ static int dw_spi_dma_submit_rx(struct dw_spi *dws, struct scatterlist *sgl, return ret; } - set_bit(RX_BUSY, &dws->dma_chan_busy); + set_bit(DW_SPI_RX_BUSY, &dws->dma_chan_busy); return 0; } @@ -431,16 +431,16 @@ static int dw_spi_dma_setup(struct dw_spi *dws, struct spi_transfer *xfer) } /* Set the DMA handshaking interface */ - dma_ctrl = SPI_DMA_TDMAE; + dma_ctrl = DW_SPI_DMACR_TDMAE; if (xfer->rx_buf) - dma_ctrl |= SPI_DMA_RDMAE; + dma_ctrl |= DW_SPI_DMACR_RDMAE; dw_writel(dws, DW_SPI_DMACR, dma_ctrl); /* Set the interrupt mask */ - imr = SPI_INT_TXOI; + imr = DW_SPI_INT_TXOI; if (xfer->rx_buf) - imr |= SPI_INT_RXUI | SPI_INT_RXOI; - spi_umask_intr(dws, imr); + imr |= DW_SPI_INT_RXUI | DW_SPI_INT_RXOI; + dw_spi_umask_intr(dws, imr); reinit_completion(&dws->dma_completion); @@ -616,13 +616,13 @@ static int dw_spi_dma_transfer(struct dw_spi *dws, struct spi_transfer *xfer) static void dw_spi_dma_stop(struct dw_spi *dws) { - if (test_bit(TX_BUSY, &dws->dma_chan_busy)) { + if (test_bit(DW_SPI_TX_BUSY, &dws->dma_chan_busy)) { dmaengine_terminate_sync(dws->txchan); - clear_bit(TX_BUSY, &dws->dma_chan_busy); + clear_bit(DW_SPI_TX_BUSY, &dws->dma_chan_busy); } - if (test_bit(RX_BUSY, &dws->dma_chan_busy)) { + if (test_bit(DW_SPI_RX_BUSY, &dws->dma_chan_busy)) { dmaengine_terminate_sync(dws->rxchan); - clear_bit(RX_BUSY, &dws->dma_chan_busy); + clear_bit(DW_SPI_RX_BUSY, &dws->dma_chan_busy); } } diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 711f4d3404c5..0b37bd32b041 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -196,18 +196,18 @@ static int dw_spi_alpine_init(struct platform_device *pdev, return 0; } -static int dw_spi_dw_apb_init(struct platform_device *pdev, - struct dw_spi_mmio *dwsmmio) +static int dw_spi_pssi_init(struct platform_device *pdev, + struct dw_spi_mmio *dwsmmio) { dw_spi_dma_setup_generic(&dwsmmio->dws); return 0; } -static int dw_spi_dwc_ssi_init(struct platform_device *pdev, - struct dw_spi_mmio *dwsmmio) +static int dw_spi_hssi_init(struct platform_device *pdev, + struct dw_spi_mmio *dwsmmio) { - dwsmmio->dws.caps = DW_SPI_CAP_DWC_SSI; + dwsmmio->dws.caps = DW_SPI_CAP_DWC_HSSI; dw_spi_dma_setup_generic(&dwsmmio->dws); @@ -217,7 +217,7 @@ static int dw_spi_dwc_ssi_init(struct platform_device *pdev, static int dw_spi_keembay_init(struct platform_device *pdev, struct dw_spi_mmio *dwsmmio) { - dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST | DW_SPI_CAP_DWC_SSI; + dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST | DW_SPI_CAP_DWC_HSSI; return 0; } @@ -342,12 +342,12 @@ static int dw_spi_mmio_remove(struct platform_device *pdev) } static const struct of_device_id dw_spi_mmio_of_match[] = { - { .compatible = "snps,dw-apb-ssi", .data = dw_spi_dw_apb_init}, + { .compatible = "snps,dw-apb-ssi", .data = dw_spi_pssi_init}, { .compatible = "mscc,ocelot-spi", .data = dw_spi_mscc_ocelot_init}, { .compatible = "mscc,jaguar2-spi", .data = dw_spi_mscc_jaguar2_init}, { .compatible = "amazon,alpine-dw-apb-ssi", .data = dw_spi_alpine_init}, - { .compatible = "renesas,rzn1-spi", .data = dw_spi_dw_apb_init}, - { .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_dwc_ssi_init}, + { .compatible = "renesas,rzn1-spi", .data = dw_spi_pssi_init}, + { .compatible = "snps,dwc-ssi-1.01a", .data = dw_spi_hssi_init}, { .compatible = "intel,keembay-ssi", .data = dw_spi_keembay_init}, { .compatible = "microchip,sparx5-spi", dw_spi_mscc_sparx5_init}, { .compatible = "canaan,k210-spi", dw_spi_canaan_k210_init}, @@ -357,7 +357,7 @@ MODULE_DEVICE_TABLE(of, dw_spi_mmio_of_match); #ifdef CONFIG_ACPI static const struct acpi_device_id dw_spi_mmio_acpi_match[] = { - {"HISI0173", (kernel_ulong_t)dw_spi_dw_apb_init}, + {"HISI0173", (kernel_ulong_t)dw_spi_pssi_init}, {}, }; MODULE_DEVICE_TABLE(acpi, dw_spi_mmio_acpi_match); diff --git a/drivers/spi/spi-dw-pci.c b/drivers/spi/spi-dw-pci.c index 5552240fee55..7c8279d13f31 100644 --- a/drivers/spi/spi-dw-pci.c +++ b/drivers/spi/spi-dw-pci.c @@ -24,14 +24,14 @@ #define CLK_SPI_CDIV_MASK 0x00000e00 #define CLK_SPI_DISABLE_OFFSET 8 -struct spi_pci_desc { +struct dw_spi_pci_desc { int (*setup)(struct dw_spi *); u16 num_cs; u16 bus_num; u32 max_freq; }; -static int spi_mid_init(struct dw_spi *dws) +static int dw_spi_pci_mid_init(struct dw_spi *dws) { void __iomem *clk_reg; u32 clk_cdiv; @@ -53,36 +53,36 @@ static int spi_mid_init(struct dw_spi *dws) return 0; } -static int spi_generic_init(struct dw_spi *dws) +static int dw_spi_pci_generic_init(struct dw_spi *dws) { dw_spi_dma_setup_generic(dws); return 0; } -static struct spi_pci_desc spi_pci_mid_desc_1 = { - .setup = spi_mid_init, +static struct dw_spi_pci_desc dw_spi_pci_mid_desc_1 = { + .setup = dw_spi_pci_mid_init, .num_cs = 5, .bus_num = 0, }; -static struct spi_pci_desc spi_pci_mid_desc_2 = { - .setup = spi_mid_init, +static struct dw_spi_pci_desc dw_spi_pci_mid_desc_2 = { + .setup = dw_spi_pci_mid_init, .num_cs = 2, .bus_num = 1, }; -static struct spi_pci_desc spi_pci_ehl_desc = { - .setup = spi_generic_init, +static struct dw_spi_pci_desc dw_spi_pci_ehl_desc = { + .setup = dw_spi_pci_generic_init, .num_cs = 2, .bus_num = -1, .max_freq = 100000000, }; -static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +static int dw_spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) { + struct dw_spi_pci_desc *desc = (struct dw_spi_pci_desc *)ent->driver_data; struct dw_spi *dws; - struct spi_pci_desc *desc = (struct spi_pci_desc *)ent->driver_data; int pci_bar = 0; int ret; @@ -150,7 +150,7 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return ret; } -static void spi_pci_remove(struct pci_dev *pdev) +static void dw_spi_pci_remove(struct pci_dev *pdev) { struct dw_spi *dws = pci_get_drvdata(pdev); @@ -162,14 +162,14 @@ static void spi_pci_remove(struct pci_dev *pdev) } #ifdef CONFIG_PM_SLEEP -static int spi_suspend(struct device *dev) +static int dw_spi_pci_suspend(struct device *dev) { struct dw_spi *dws = dev_get_drvdata(dev); return dw_spi_suspend_host(dws); } -static int spi_resume(struct device *dev) +static int dw_spi_pci_resume(struct device *dev) { struct dw_spi *dws = dev_get_drvdata(dev); @@ -177,38 +177,37 @@ static int spi_resume(struct device *dev) } #endif -static SIMPLE_DEV_PM_OPS(dw_spi_pm_ops, spi_suspend, spi_resume); +static SIMPLE_DEV_PM_OPS(dw_spi_pci_pm_ops, dw_spi_pci_suspend, dw_spi_pci_resume); -static const struct pci_device_id pci_ids[] = { +static const struct pci_device_id dw_spi_pci_ids[] = { /* Intel MID platform SPI controller 0 */ /* * The access to the device 8086:0801 is disabled by HW, since it's * exclusively used by SCU to communicate with MSIC. */ /* Intel MID platform SPI controller 1 */ - { PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&spi_pci_mid_desc_1}, + { PCI_VDEVICE(INTEL, 0x0800), (kernel_ulong_t)&dw_spi_pci_mid_desc_1}, /* Intel MID platform SPI controller 2 */ - { PCI_VDEVICE(INTEL, 0x0812), (kernel_ulong_t)&spi_pci_mid_desc_2}, + { PCI_VDEVICE(INTEL, 0x0812), (kernel_ulong_t)&dw_spi_pci_mid_desc_2}, /* Intel Elkhart Lake PSE SPI controllers */ - { PCI_VDEVICE(INTEL, 0x4b84), (kernel_ulong_t)&spi_pci_ehl_desc}, - { PCI_VDEVICE(INTEL, 0x4b85), (kernel_ulong_t)&spi_pci_ehl_desc}, - { PCI_VDEVICE(INTEL, 0x4b86), (kernel_ulong_t)&spi_pci_ehl_desc}, - { PCI_VDEVICE(INTEL, 0x4b87), (kernel_ulong_t)&spi_pci_ehl_desc}, + { PCI_VDEVICE(INTEL, 0x4b84), (kernel_ulong_t)&dw_spi_pci_ehl_desc}, + { PCI_VDEVICE(INTEL, 0x4b85), (kernel_ulong_t)&dw_spi_pci_ehl_desc}, + { PCI_VDEVICE(INTEL, 0x4b86), (kernel_ulong_t)&dw_spi_pci_ehl_desc}, + { PCI_VDEVICE(INTEL, 0x4b87), (kernel_ulong_t)&dw_spi_pci_ehl_desc}, {}, }; -MODULE_DEVICE_TABLE(pci, pci_ids); +MODULE_DEVICE_TABLE(pci, dw_spi_pci_ids); -static struct pci_driver dw_spi_driver = { +static struct pci_driver dw_spi_pci_driver = { .name = DRIVER_NAME, - .id_table = pci_ids, - .probe = spi_pci_probe, - .remove = spi_pci_remove, + .id_table = dw_spi_pci_ids, + .probe = dw_spi_pci_probe, + .remove = dw_spi_pci_remove, .driver = { - .pm = &dw_spi_pm_ops, + .pm = &dw_spi_pci_pm_ops, }, }; - -module_pci_driver(dw_spi_driver); +module_pci_driver(dw_spi_pci_driver); MODULE_AUTHOR("Feng Tang "); MODULE_DESCRIPTION("PCI interface driver for DW SPI Core"); diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 467c342bfe56..893b78c43a50 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef DW_SPI_HEADER_H -#define DW_SPI_HEADER_H +#ifndef __SPI_DW_H__ +#define __SPI_DW_H__ #include #include @@ -11,7 +11,7 @@ #include #include -/* Register offsets */ +/* Register offsets (Generic for both DWC APB SSI and DWC SSI IP-cores) */ #define DW_SPI_CTRLR0 0x00 #define DW_SPI_CTRLR1 0x04 #define DW_SPI_SSIENR 0x08 @@ -40,84 +40,85 @@ #define DW_SPI_RX_SAMPLE_DLY 0xf0 #define DW_SPI_CS_OVERRIDE 0xf4 -/* Bit fields in CTRLR0 */ -#define SPI_DFS_OFFSET 0 -#define SPI_DFS_MASK GENMASK(3, 0) -#define SPI_DFS32_OFFSET 16 - -#define SPI_FRF_OFFSET 4 -#define SPI_FRF_MOTO_SPI 0x0 -#define SPI_FRF_TI_SSP 0x1 -#define SPI_FRF_NS_MICROWIRE 0x2 -#define SPI_FRF_RESV 0x3 - -#define SPI_MODE_OFFSET 6 -#define SPI_SCPH_OFFSET 6 -#define SPI_SCOL_OFFSET 7 - -#define SPI_TMOD_OFFSET 8 -#define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET) -#define SPI_TMOD_TR 0x0 /* xmit & recv */ -#define SPI_TMOD_TO 0x1 /* xmit only */ -#define SPI_TMOD_RO 0x2 /* recv only */ -#define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */ - -#define SPI_SLVOE_OFFSET 10 -#define SPI_SRL_OFFSET 11 -#define SPI_CFS_OFFSET 12 - -/* Bit fields in CTRLR0 based on DWC_ssi_databook.pdf v1.01a */ -#define DWC_SSI_CTRLR0_SRL_OFFSET 13 -#define DWC_SSI_CTRLR0_TMOD_OFFSET 10 -#define DWC_SSI_CTRLR0_TMOD_MASK GENMASK(11, 10) -#define DWC_SSI_CTRLR0_SCPOL_OFFSET 9 -#define DWC_SSI_CTRLR0_SCPH_OFFSET 8 -#define DWC_SSI_CTRLR0_FRF_OFFSET 6 -#define DWC_SSI_CTRLR0_DFS_OFFSET 0 +/* Bit fields in CTRLR0 (DWC APB SSI) */ +#define DW_PSSI_CTRLR0_DFS_OFFSET 0 +#define DW_PSSI_CTRLR0_DFS_MASK GENMASK(3, 0) +#define DW_PSSI_CTRLR0_DFS32_OFFSET 16 + +#define DW_PSSI_CTRLR0_FRF_OFFSET 4 +#define DW_SPI_CTRLR0_FRF_MOTO_SPI 0x0 +#define DW_SPI_CTRLR0_FRF_TI_SSP 0x1 +#define DW_SPI_CTRLR0_FRF_NS_MICROWIRE 0x2 +#define DW_SPI_CTRLR0_FRF_RESV 0x3 + +#define DW_PSSI_CTRLR0_MODE_OFFSET 6 +#define DW_PSSI_CTRLR0_SCPH_OFFSET 6 +#define DW_PSSI_CTRLR0_SCOL_OFFSET 7 + +#define DW_PSSI_CTRLR0_TMOD_OFFSET 8 +#define DW_PSSI_CTRLR0_TMOD_MASK (0x3 << DW_PSSI_CTRLR0_TMOD_OFFSET) +#define DW_SPI_CTRLR0_TMOD_TR 0x0 /* xmit & recv */ +#define DW_SPI_CTRLR0_TMOD_TO 0x1 /* xmit only */ +#define DW_SPI_CTRLR0_TMOD_RO 0x2 /* recv only */ +#define DW_SPI_CTRLR0_TMOD_EPROMREAD 0x3 /* eeprom read mode */ + +#define DW_PSSI_CTRLR0_SLVOE_OFFSET 10 +#define DW_PSSI_CTRLR0_SRL_OFFSET 11 +#define DW_PSSI_CTRLR0_CFS_OFFSET 12 + +/* Bit fields in CTRLR0 (DWC SSI with AHB interface) */ +#define DW_HSSI_CTRLR0_SRL_OFFSET 13 +#define DW_HSSI_CTRLR0_TMOD_OFFSET 10 +#define DW_HSSI_CTRLR0_TMOD_MASK GENMASK(11, 10) +#define DW_HSSI_CTRLR0_SCPOL_OFFSET 9 +#define DW_HSSI_CTRLR0_SCPH_OFFSET 8 +#define DW_HSSI_CTRLR0_FRF_OFFSET 6 +#define DW_HSSI_CTRLR0_DFS_OFFSET 0 /* * For Keem Bay, CTRLR0[31] is used to select controller mode. * 0: SSI is slave * 1: SSI is master */ -#define DWC_SSI_CTRLR0_KEEMBAY_MST BIT(31) +#define DW_HSSI_CTRLR0_KEEMBAY_MST BIT(31) /* Bit fields in CTRLR1 */ -#define SPI_NDF_MASK GENMASK(15, 0) +#define DW_SPI_NDF_MASK GENMASK(15, 0) /* Bit fields in SR, 7 bits */ -#define SR_MASK 0x7f /* cover 7 bits */ -#define SR_BUSY (1 << 0) -#define SR_TF_NOT_FULL (1 << 1) -#define SR_TF_EMPT (1 << 2) -#define SR_RF_NOT_EMPT (1 << 3) -#define SR_RF_FULL (1 << 4) -#define SR_TX_ERR (1 << 5) -#define SR_DCOL (1 << 6) +#define DW_SPI_SR_MASK 0x7f /* cover 7 bits */ +#define DW_SPI_SR_BUSY (1 << 0) +#define DW_SPI_SR_TF_NOT_FULL (1 << 1) +#define DW_SPI_SR_TF_EMPT (1 << 2) +#define DW_SPI_SR_RF_NOT_EMPT (1 << 3) +#define DW_SPI_SR_RF_FULL (1 << 4) +#define DW_SPI_SR_TX_ERR (1 << 5) +#define DW_SPI_SR_DCOL (1 << 6) /* Bit fields in ISR, IMR, RISR, 7 bits */ -#define SPI_INT_TXEI (1 << 0) -#define SPI_INT_TXOI (1 << 1) -#define SPI_INT_RXUI (1 << 2) -#define SPI_INT_RXOI (1 << 3) -#define SPI_INT_RXFI (1 << 4) -#define SPI_INT_MSTI (1 << 5) +#define DW_SPI_INT_TXEI (1 << 0) +#define DW_SPI_INT_TXOI (1 << 1) +#define DW_SPI_INT_RXUI (1 << 2) +#define DW_SPI_INT_RXOI (1 << 3) +#define DW_SPI_INT_RXFI (1 << 4) +#define DW_SPI_INT_MSTI (1 << 5) /* Bit fields in DMACR */ -#define SPI_DMA_RDMAE (1 << 0) -#define SPI_DMA_TDMAE (1 << 1) +#define DW_SPI_DMACR_RDMAE (1 << 0) +#define DW_SPI_DMACR_TDMAE (1 << 1) -#define SPI_WAIT_RETRIES 5 -#define SPI_BUF_SIZE \ +/* Mem/DMA operations helpers */ +#define DW_SPI_WAIT_RETRIES 5 +#define DW_SPI_BUF_SIZE \ (sizeof_field(struct spi_mem_op, cmd.opcode) + \ sizeof_field(struct spi_mem_op, addr.val) + 256) -#define SPI_GET_BYTE(_val, _idx) \ +#define DW_SPI_GET_BYTE(_val, _idx) \ ((_val) >> (BITS_PER_BYTE * (_idx)) & 0xff) /* DW SPI capabilities */ #define DW_SPI_CAP_CS_OVERRIDE BIT(0) #define DW_SPI_CAP_KEEMBAY_MST BIT(1) -#define DW_SPI_CAP_DWC_SSI BIT(2) +#define DW_SPI_CAP_DWC_HSSI BIT(2) #define DW_SPI_CAP_DFS32 BIT(3) /* Slave spi_transfer/spi_mem_op related */ @@ -162,7 +163,7 @@ struct dw_spi { unsigned int tx_len; void *rx; unsigned int rx_len; - u8 buf[SPI_BUF_SIZE]; + u8 buf[DW_SPI_BUF_SIZE]; int dma_mapped; u8 n_bytes; /* current is a 1/2 bytes op */ irqreturn_t (*transfer_handler)(struct dw_spi *dws); @@ -224,18 +225,18 @@ static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val) } } -static inline void spi_enable_chip(struct dw_spi *dws, int enable) +static inline void dw_spi_enable_chip(struct dw_spi *dws, int enable) { dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0)); } -static inline void spi_set_clk(struct dw_spi *dws, u16 div) +static inline void dw_spi_set_clk(struct dw_spi *dws, u16 div) { dw_writel(dws, DW_SPI_BAUDR, div); } /* Disable IRQ bits */ -static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) +static inline void dw_spi_mask_intr(struct dw_spi *dws, u32 mask) { u32 new_mask; @@ -244,7 +245,7 @@ static inline void spi_mask_intr(struct dw_spi *dws, u32 mask) } /* Enable IRQ bits */ -static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) +static inline void dw_spi_umask_intr(struct dw_spi *dws, u32 mask) { u32 new_mask; @@ -257,19 +258,19 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) * and CS, then re-enables the controller back. Transmit and receive FIFO * buffers are cleared when the device is disabled. */ -static inline void spi_reset_chip(struct dw_spi *dws) +static inline void dw_spi_reset_chip(struct dw_spi *dws) { - spi_enable_chip(dws, 0); - spi_mask_intr(dws, 0xff); + dw_spi_enable_chip(dws, 0); + dw_spi_mask_intr(dws, 0xff); dw_readl(dws, DW_SPI_ICR); dw_writel(dws, DW_SPI_SER, 0); - spi_enable_chip(dws, 1); + dw_spi_enable_chip(dws, 1); } -static inline void spi_shutdown_chip(struct dw_spi *dws) +static inline void dw_spi_shutdown_chip(struct dw_spi *dws) { - spi_enable_chip(dws, 0); - spi_set_clk(dws, 0); + dw_spi_enable_chip(dws, 0); + dw_spi_set_clk(dws, 0); } extern void dw_spi_set_cs(struct spi_device *spi, bool enable); @@ -293,4 +294,4 @@ static inline void dw_spi_dma_setup_generic(struct dw_spi *dws) {} #endif /* !CONFIG_SPI_DW_DMA */ -#endif /* DW_SPI_HEADER_H */ +#endif /* __SPI_DW_H__ */ From patchwork Mon Nov 15 18:19:14 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 518827 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 52DCFC433F5 for ; Tue, 16 Nov 2021 01:43:41 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 3E90D61A89 for ; Tue, 16 Nov 2021 01:43:41 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1358216AbhKPBqa (ORCPT ); Mon, 15 Nov 2021 20:46:30 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:45122 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241612AbhKOSY3 (ORCPT ); Mon, 15 Nov 2021 13:24:29 -0500 From: Serge Semin Authentication-Results: mail.baikalelectronics.ru; dkim=permerror (bad message/signature format) To: Serge Semin , Mark Brown , Nandhini Srikandan , Andy Shevchenko CC: Serge Semin , Andy Shevchenko , Andy Shevchenko , , Subject: [PATCH v3 4/7] spi: dw: Convert to using the Bitfield access macros Date: Mon, 15 Nov 2021 21:19:14 +0300 Message-ID: <20211115181917.7521-5-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> References: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The driver has been using the offset/bitwise-shift-based approach for the CSR fields R/W operations since it was merged into the kernel. It can be simplified by using the macros defined in the linux/bitfield.h and linux/bit.h header files like BIT(), GENMASK(), FIELD_PREP(), FIELD_GET(), etc where it is required, for instance in the cached cr0 preparation method. Thus in order to have the FIELD_*()-macros utilized we just need to convert the macros with the CSR-fields offsets to the masks with the corresponding registers fields definition. That's where the GENMASK() and BIT() macros come in handy. After that the masks can be used in the FIELD_*()-macros where it's appropriate. We also need to convert the macros with the CRS-bit flags using the manual bitwise shift operations (x << y) to using the BIT() macro. Thus we'll have a more coherent set of the CSR-related macros. Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko --- drivers/spi/spi-dw-core.c | 31 +++++++++++-------- drivers/spi/spi-dw.h | 64 +++++++++++++++++++-------------------- 2 files changed, 50 insertions(+), 45 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index 57bbffe6d6f9..b9f809989fda 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -5,6 +5,7 @@ * Copyright (c) 2009, Intel Corporation. */ +#include #include #include #include @@ -254,7 +255,7 @@ static irqreturn_t dw_spi_irq(int irq, void *dev_id) { struct spi_controller *master = dev_id; struct dw_spi *dws = spi_controller_get_devdata(master); - u16 irq_status = dw_readl(dws, DW_SPI_ISR) & 0x3f; + u16 irq_status = dw_readl(dws, DW_SPI_ISR) & DW_SPI_INT_MASK; if (!irq_status) return IRQ_NONE; @@ -273,32 +274,38 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi) if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) { /* CTRLR0[ 5: 4] Frame Format */ - cr0 |= DW_SPI_CTRLR0_FRF_MOTO_SPI << DW_PSSI_CTRLR0_FRF_OFFSET; + cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_FRF_MASK, DW_SPI_CTRLR0_FRF_MOTO_SPI); /* * SPI mode (SCPOL|SCPH) * CTRLR0[ 6] Serial Clock Phase * CTRLR0[ 7] Serial Clock Polarity */ - cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DW_PSSI_CTRLR0_SCOL_OFFSET; - cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DW_PSSI_CTRLR0_SCPH_OFFSET; + if (spi->mode & SPI_CPOL) + cr0 |= DW_PSSI_CTRLR0_SCPOL; + if (spi->mode & SPI_CPHA) + cr0 |= DW_PSSI_CTRLR0_SCPHA; /* CTRLR0[11] Shift Register Loop */ - cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DW_PSSI_CTRLR0_SRL_OFFSET; + if (spi->mode & SPI_LOOP) + cr0 |= DW_PSSI_CTRLR0_SRL; } else { /* CTRLR0[ 7: 6] Frame Format */ - cr0 |= DW_SPI_CTRLR0_FRF_MOTO_SPI << DW_HSSI_CTRLR0_FRF_OFFSET; + cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_FRF_MASK, DW_SPI_CTRLR0_FRF_MOTO_SPI); /* * SPI mode (SCPOL|SCPH) * CTRLR0[ 8] Serial Clock Phase * CTRLR0[ 9] Serial Clock Polarity */ - cr0 |= ((spi->mode & SPI_CPOL) ? 1 : 0) << DW_HSSI_CTRLR0_SCPOL_OFFSET; - cr0 |= ((spi->mode & SPI_CPHA) ? 1 : 0) << DW_HSSI_CTRLR0_SCPH_OFFSET; + if (spi->mode & SPI_CPOL) + cr0 |= DW_HSSI_CTRLR0_SCPOL; + if (spi->mode & SPI_CPHA) + cr0 |= DW_HSSI_CTRLR0_SCPHA; /* CTRLR0[13] Shift Register Loop */ - cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DW_HSSI_CTRLR0_SRL_OFFSET; + if (spi->mode & SPI_LOOP) + cr0 |= DW_HSSI_CTRLR0_SRL; if (dws->caps & DW_SPI_CAP_KEEMBAY_MST) cr0 |= DW_HSSI_CTRLR0_KEEMBAY_MST; @@ -320,10 +327,10 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) /* CTRLR0[ 9:8] Transfer Mode */ - cr0 |= cfg->tmode << DW_PSSI_CTRLR0_TMOD_OFFSET; + cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_TMOD_MASK, cfg->tmode); else /* CTRLR0[11:10] Transfer Mode */ - cr0 |= cfg->tmode << DW_HSSI_CTRLR0_TMOD_OFFSET; + cr0 |= FIELD_PREP(DW_HSSI_CTRLR0_TMOD_MASK, cfg->tmode); dw_writel(dws, DW_SPI_CTRLR0, cr0); @@ -850,7 +857,7 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws) if (!(cr0 & DW_PSSI_CTRLR0_DFS_MASK)) { dws->caps |= DW_SPI_CAP_DFS32; - dws->dfs_offset = DW_PSSI_CTRLR0_DFS32_OFFSET; + dws->dfs_offset = __bf_shf(DW_PSSI_CTRLR0_DFS32_MASK); dev_dbg(dev, "Detected 32-bits max data frame size\n"); } } else { diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 893b78c43a50..634085eadad1 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -41,39 +41,36 @@ #define DW_SPI_CS_OVERRIDE 0xf4 /* Bit fields in CTRLR0 (DWC APB SSI) */ -#define DW_PSSI_CTRLR0_DFS_OFFSET 0 #define DW_PSSI_CTRLR0_DFS_MASK GENMASK(3, 0) -#define DW_PSSI_CTRLR0_DFS32_OFFSET 16 +#define DW_PSSI_CTRLR0_DFS32_MASK GENMASK(20, 16) -#define DW_PSSI_CTRLR0_FRF_OFFSET 4 +#define DW_PSSI_CTRLR0_FRF_MASK GENMASK(5, 4) #define DW_SPI_CTRLR0_FRF_MOTO_SPI 0x0 #define DW_SPI_CTRLR0_FRF_TI_SSP 0x1 #define DW_SPI_CTRLR0_FRF_NS_MICROWIRE 0x2 #define DW_SPI_CTRLR0_FRF_RESV 0x3 -#define DW_PSSI_CTRLR0_MODE_OFFSET 6 -#define DW_PSSI_CTRLR0_SCPH_OFFSET 6 -#define DW_PSSI_CTRLR0_SCOL_OFFSET 7 +#define DW_PSSI_CTRLR0_MODE_MASK GENMASK(7, 6) +#define DW_PSSI_CTRLR0_SCPHA BIT(6) +#define DW_PSSI_CTRLR0_SCPOL BIT(7) -#define DW_PSSI_CTRLR0_TMOD_OFFSET 8 -#define DW_PSSI_CTRLR0_TMOD_MASK (0x3 << DW_PSSI_CTRLR0_TMOD_OFFSET) +#define DW_PSSI_CTRLR0_TMOD_MASK GENMASK(9, 8) #define DW_SPI_CTRLR0_TMOD_TR 0x0 /* xmit & recv */ #define DW_SPI_CTRLR0_TMOD_TO 0x1 /* xmit only */ #define DW_SPI_CTRLR0_TMOD_RO 0x2 /* recv only */ #define DW_SPI_CTRLR0_TMOD_EPROMREAD 0x3 /* eeprom read mode */ -#define DW_PSSI_CTRLR0_SLVOE_OFFSET 10 -#define DW_PSSI_CTRLR0_SRL_OFFSET 11 -#define DW_PSSI_CTRLR0_CFS_OFFSET 12 +#define DW_PSSI_CTRLR0_SLV_OE BIT(10) +#define DW_PSSI_CTRLR0_SRL BIT(11) +#define DW_PSSI_CTRLR0_CFS BIT(12) /* Bit fields in CTRLR0 (DWC SSI with AHB interface) */ -#define DW_HSSI_CTRLR0_SRL_OFFSET 13 -#define DW_HSSI_CTRLR0_TMOD_OFFSET 10 +#define DW_HSSI_CTRLR0_DFS_MASK GENMASK(4, 0) +#define DW_HSSI_CTRLR0_FRF_MASK GENMASK(7, 6) +#define DW_HSSI_CTRLR0_SCPHA BIT(8) +#define DW_HSSI_CTRLR0_SCPOL BIT(9) #define DW_HSSI_CTRLR0_TMOD_MASK GENMASK(11, 10) -#define DW_HSSI_CTRLR0_SCPOL_OFFSET 9 -#define DW_HSSI_CTRLR0_SCPH_OFFSET 8 -#define DW_HSSI_CTRLR0_FRF_OFFSET 6 -#define DW_HSSI_CTRLR0_DFS_OFFSET 0 +#define DW_HSSI_CTRLR0_SRL BIT(13) /* * For Keem Bay, CTRLR0[31] is used to select controller mode. @@ -86,26 +83,27 @@ #define DW_SPI_NDF_MASK GENMASK(15, 0) /* Bit fields in SR, 7 bits */ -#define DW_SPI_SR_MASK 0x7f /* cover 7 bits */ -#define DW_SPI_SR_BUSY (1 << 0) -#define DW_SPI_SR_TF_NOT_FULL (1 << 1) -#define DW_SPI_SR_TF_EMPT (1 << 2) -#define DW_SPI_SR_RF_NOT_EMPT (1 << 3) -#define DW_SPI_SR_RF_FULL (1 << 4) -#define DW_SPI_SR_TX_ERR (1 << 5) -#define DW_SPI_SR_DCOL (1 << 6) +#define DW_SPI_SR_MASK GENMASK(6, 0) +#define DW_SPI_SR_BUSY BIT(0) +#define DW_SPI_SR_TF_NOT_FULL BIT(1) +#define DW_SPI_SR_TF_EMPT BIT(2) +#define DW_SPI_SR_RF_NOT_EMPT BIT(3) +#define DW_SPI_SR_RF_FULL BIT(4) +#define DW_SPI_SR_TX_ERR BIT(5) +#define DW_SPI_SR_DCOL BIT(6) /* Bit fields in ISR, IMR, RISR, 7 bits */ -#define DW_SPI_INT_TXEI (1 << 0) -#define DW_SPI_INT_TXOI (1 << 1) -#define DW_SPI_INT_RXUI (1 << 2) -#define DW_SPI_INT_RXOI (1 << 3) -#define DW_SPI_INT_RXFI (1 << 4) -#define DW_SPI_INT_MSTI (1 << 5) +#define DW_SPI_INT_MASK GENMASK(5, 0) +#define DW_SPI_INT_TXEI BIT(0) +#define DW_SPI_INT_TXOI BIT(1) +#define DW_SPI_INT_RXUI BIT(2) +#define DW_SPI_INT_RXOI BIT(3) +#define DW_SPI_INT_RXFI BIT(4) +#define DW_SPI_INT_MSTI BIT(5) /* Bit fields in DMACR */ -#define DW_SPI_DMACR_RDMAE (1 << 0) -#define DW_SPI_DMACR_TDMAE (1 << 1) +#define DW_SPI_DMACR_RDMAE BIT(0) +#define DW_SPI_DMACR_TDMAE BIT(1) /* Mem/DMA operations helpers */ #define DW_SPI_WAIT_RETRIES 5 From patchwork Mon Nov 15 18:19:15 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 517740 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 87FDAC433EF for ; Mon, 15 Nov 2021 18:24:03 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7724263420 for ; Mon, 15 Nov 2021 18:24:03 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S240617AbhKOS0x (ORCPT ); Mon, 15 Nov 2021 13:26:53 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:45168 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241723AbhKOSZC (ORCPT ); Mon, 15 Nov 2021 13:25:02 -0500 From: Serge Semin Authentication-Results: mail.baikalelectronics.ru; dkim=permerror (bad message/signature format) To: Serge Semin , Mark Brown , Nandhini Srikandan , Andy Shevchenko CC: Serge Semin , Andy Shevchenko , Andy Shevchenko , , Subject: [PATCH v3 5/7] spi: dw: Introduce Synopsys IP-core versions interface Date: Mon, 15 Nov 2021 21:19:15 +0300 Message-ID: <20211115181917.7521-6-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> References: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The driver currently supports two IP-core versions. It's DW APB SSI which is older version of the controller with APB system bus interface, and DW SSI controller with AHB bus interface. The later one is supposed to be a new generation high-speed SSI. Even though both of these IP-cores have got an almost identical registers space there are some differences. The driver differentiates these distinctions by the DW_SPI_CAP_DWC_HSSI capability flag. In addition to that each DW SSI IP-core is equipped with a Synopsys Component version register, which encodes the IP-core release ID the has been synthesized from. Seeing we are going to need the later one to differentiate some controller peculiarities it would be better to have a unified interface for both IP-core line and release versions instead of using each of them separately. Introduced here IP-core versioning interface consists of two parts: 1) IDs of the IP-core (virtual) and component versions. 2) a set of macro helpers to identify current IP-core and component versions. So the platform code is supposed to assign a proper IP-core version based on it's platform -knowledge. The main driver initialization method reads the IP-core release ID from the SSI component version register. That data is used by the helpers to distinguish one IP-core release from another. Thus the rest of the driver can use these macros to implement the conditional code execution based on the specified IP-core and version IDs. Collect the IP-core versions interface and the defined capabilities at the top of the header file since they represent a common device description data and so to immediately available for the driver hackers. Signed-off-by: Serge Semin Suggested-by: Andy Shevchenko Reviewed-by: Andy Shevchenko --- Note I intentionally haven't used the "%p4cc" format specifier due to three reasons. First the component version 4cc string is preserved in the little endian format in the DW SSI register thus having '*' in the least significant byte. Such representation do look well when you print it in hex, but that's not what the 4cc format print implementation expects (fourcc_string() wants to see a most-significant char at the lowest byte). Second the 4cc format also prints some pixel-format specific info like endiannes, which is irrelevant to the synopsys component version. Finally a string in the "v%c.%c%c" format represents the component version better. Changelog v2: - Replace the ASCII-to-integer conversion with a unified IP-core versions interface. --- drivers/spi/spi-dw-core.c | 14 ++++++++++++++ drivers/spi/spi-dw.h | 36 ++++++++++++++++++++++++++++-------- 2 files changed, 42 insertions(+), 8 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index b9f809989fda..42536b448ddd 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -823,6 +823,20 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws) { dw_spi_reset_chip(dws); + /* + * Retrieve the Synopsys component version if it hasn't been specified + * by the platform. CoreKit version ID is encoded as a 3-chars ASCII + * code enclosed with '*' (typical for the most of Synopsys IP-cores). + */ + if (!dws->ver) { + dws->ver = dw_readl(dws, DW_SPI_VERSION); + + dev_dbg(dev, "Synopsys DWC%sSSI v%c.%c%c\n", + (dws->caps & DW_SPI_CAP_DWC_HSSI) ? " " : " APB ", + DW_SPI_GET_BYTE(dws->ver, 3), DW_SPI_GET_BYTE(dws->ver, 2), + DW_SPI_GET_BYTE(dws->ver, 1)); + } + /* * Try to detect the FIFO depth if not set by interface driver, * the depth could be from 2 to 256 from HW spec diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 634085eadad1..2f7d77024b48 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -11,6 +11,30 @@ #include #include +/* Synopsys DW SSI IP-core virtual IDs */ +#define DW_PSSI_ID 0 +#define DW_HSSI_ID 1 + +/* Synopsys DW SSI component versions (FourCC sequence) */ +#define DW_HSSI_102A 0x3130322a + +/* DW SSI IP-core ID and version check helpers */ +#define dw_spi_ip_is(_dws, _ip) \ + ((_dws)->ip == DW_ ## _ip ## _ID) + +#define __dw_spi_ver_cmp(_dws, _ip, _ver, _op) \ + (dw_spi_ip_is(_dws, _ip) && (_dws)->ver _op DW_ ## _ip ## _ver) + +#define dw_spi_ver_is(_dws, _ip, _ver) __dw_spi_ver_cmp(_dws, _ip, _ver, ==) + +#define dw_spi_ver_is_ge(_dws, _ip, _ver) __dw_spi_ver_cmp(_dws, _ip, _ver, >=) + +/* DW SPI controller capabilities */ +#define DW_SPI_CAP_CS_OVERRIDE BIT(0) +#define DW_SPI_CAP_KEEMBAY_MST BIT(1) +#define DW_SPI_CAP_DWC_HSSI BIT(2) +#define DW_SPI_CAP_DFS32 BIT(3) + /* Register offsets (Generic for both DWC APB SSI and DWC SSI IP-cores) */ #define DW_SPI_CTRLR0 0x00 #define DW_SPI_CTRLR1 0x04 @@ -113,12 +137,6 @@ #define DW_SPI_GET_BYTE(_val, _idx) \ ((_val) >> (BITS_PER_BYTE * (_idx)) & 0xff) -/* DW SPI capabilities */ -#define DW_SPI_CAP_CS_OVERRIDE BIT(0) -#define DW_SPI_CAP_KEEMBAY_MST BIT(1) -#define DW_SPI_CAP_DWC_HSSI BIT(2) -#define DW_SPI_CAP_DFS32 BIT(3) - /* Slave spi_transfer/spi_mem_op related */ struct dw_spi_cfg { u8 tmode; @@ -141,6 +159,10 @@ struct dw_spi_dma_ops { struct dw_spi { struct spi_controller *master; + u32 ip; /* Synopsys DW SSI IP-core ID */ + u32 ver; /* Synopsys component version */ + u32 caps; /* DW SPI capabilities */ + void __iomem *regs; unsigned long paddr; int irq; @@ -149,8 +171,6 @@ struct dw_spi { u32 max_mem_freq; /* max mem-ops bus freq */ u32 max_freq; /* max bus freq supported */ - u32 caps; /* DW SPI capabilities */ - u32 reg_io_width; /* DR I/O width in bytes */ u16 bus_num; u16 num_cs; /* supported slave numbers */ From patchwork Mon Nov 15 18:19:16 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 517739 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0725FC433EF for ; Mon, 15 Nov 2021 18:24:21 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id E3E9E63429 for ; Mon, 15 Nov 2021 18:24:20 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241215AbhKOS1M (ORCPT ); Mon, 15 Nov 2021 13:27:12 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:45166 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241724AbhKOSZC (ORCPT ); Mon, 15 Nov 2021 13:25:02 -0500 From: Serge Semin Authentication-Results: mail.baikalelectronics.ru; dkim=permerror (bad message/signature format) To: Serge Semin , Mark Brown , Nandhini Srikandan , Andy Shevchenko CC: Serge Semin , Andy Shevchenko , Andy Shevchenko , , Subject: [PATCH v3 6/7] spi: dw: Replace DWC_HSSI capability with IP-core version checker Date: Mon, 15 Nov 2021 21:19:16 +0300 Message-ID: <20211115181917.7521-7-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> References: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Since there is a common IP-core and component versions interface available we can use it to differentiate the DW HSSI device features in the code. Let's remove the corresponding DWC_HSSI capability flag then and use the dw_spi_ip_is() macro instead. Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko --- Changelog v2: - This is a new patch created as a logical result of a new DW SSI IP-core versions internal interface introduced in the previous patch. Changelog v3: - Move the DW_SPI_CAP_DFS32 capability flag position fix to a separate patch. --- drivers/spi/spi-dw-core.c | 8 ++++---- drivers/spi/spi-dw-mmio.c | 5 +++-- drivers/spi/spi-dw.h | 1 - 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index 42536b448ddd..934cc7a922e8 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -272,7 +272,7 @@ static u32 dw_spi_prepare_cr0(struct dw_spi *dws, struct spi_device *spi) { u32 cr0 = 0; - if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) { + if (dw_spi_ip_is(dws, PSSI)) { /* CTRLR0[ 5: 4] Frame Format */ cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_FRF_MASK, DW_SPI_CTRLR0_FRF_MOTO_SPI); @@ -325,7 +325,7 @@ void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, /* CTRLR0[ 4/3: 0] or CTRLR0[ 20: 16] Data Frame Size */ cr0 |= (cfg->dfs - 1) << dws->dfs_offset; - if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) + if (dw_spi_ip_is(dws, PSSI)) /* CTRLR0[ 9:8] Transfer Mode */ cr0 |= FIELD_PREP(DW_PSSI_CTRLR0_TMOD_MASK, cfg->tmode); else @@ -832,7 +832,7 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws) dws->ver = dw_readl(dws, DW_SPI_VERSION); dev_dbg(dev, "Synopsys DWC%sSSI v%c.%c%c\n", - (dws->caps & DW_SPI_CAP_DWC_HSSI) ? " " : " APB ", + dw_spi_ip_is(dws, PSSI) ? " APB " : " ", DW_SPI_GET_BYTE(dws->ver, 3), DW_SPI_GET_BYTE(dws->ver, 2), DW_SPI_GET_BYTE(dws->ver, 1)); } @@ -860,7 +860,7 @@ static void dw_spi_hw_init(struct device *dev, struct dw_spi *dws) * writability. Note DWC SSI controller also has the extended DFS, but * with zero offset. */ - if (!(dws->caps & DW_SPI_CAP_DWC_HSSI)) { + if (dw_spi_ip_is(dws, PSSI)) { u32 cr0, tmp = dw_readl(dws, DW_SPI_CTRLR0); dw_spi_enable_chip(dws, 0); diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c index 0b37bd32b041..c0e5bb6add0a 100644 --- a/drivers/spi/spi-dw-mmio.c +++ b/drivers/spi/spi-dw-mmio.c @@ -207,7 +207,7 @@ static int dw_spi_pssi_init(struct platform_device *pdev, static int dw_spi_hssi_init(struct platform_device *pdev, struct dw_spi_mmio *dwsmmio) { - dwsmmio->dws.caps = DW_SPI_CAP_DWC_HSSI; + dwsmmio->dws.ip = DW_HSSI_ID; dw_spi_dma_setup_generic(&dwsmmio->dws); @@ -217,7 +217,8 @@ static int dw_spi_hssi_init(struct platform_device *pdev, static int dw_spi_keembay_init(struct platform_device *pdev, struct dw_spi_mmio *dwsmmio) { - dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST | DW_SPI_CAP_DWC_HSSI; + dwsmmio->dws.ip = DW_HSSI_ID; + dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST; return 0; } diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 2f7d77024b48..8334e6b35f89 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -32,7 +32,6 @@ /* DW SPI controller capabilities */ #define DW_SPI_CAP_CS_OVERRIDE BIT(0) #define DW_SPI_CAP_KEEMBAY_MST BIT(1) -#define DW_SPI_CAP_DWC_HSSI BIT(2) #define DW_SPI_CAP_DFS32 BIT(3) /* Register offsets (Generic for both DWC APB SSI and DWC SSI IP-cores) */ From patchwork Mon Nov 15 18:19:17 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 518830 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id EACBBC433F5 for ; Mon, 15 Nov 2021 18:24:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id D37CE63422 for ; Mon, 15 Nov 2021 18:24:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S241023AbhKOS04 (ORCPT ); Mon, 15 Nov 2021 13:26:56 -0500 Received: from mail.baikalelectronics.com ([87.245.175.226]:45170 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S241725AbhKOSZC (ORCPT ); Mon, 15 Nov 2021 13:25:02 -0500 From: Serge Semin Authentication-Results: mail.baikalelectronics.ru; dkim=permerror (bad message/signature format) To: Serge Semin , Mark Brown , Nandhini Srikandan , Andy Shevchenko CC: Serge Semin , Andy Shevchenko , Andy Shevchenko , , Subject: [PATCH v3 7/7] spi: dw: Define the capabilities in a continuous bit-flags set Date: Mon, 15 Nov 2021 21:19:17 +0300 Message-ID: <20211115181917.7521-8-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> References: <20211115181917.7521-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Since the DW_SPI_CAP_DWC_HSSI capability has just been replaced with using the DW SSI IP-core versions interface, the DW SPI capability flags are now represented with a gap. Let's fix it by redefining the DW_SPI_CAP_DFS32 macro to setting BIT(2) of the capabilities field. Signed-off-by: Serge Semin Suggested-by: Andy Shevchenko --- Changelog v3: - This is a new patch unpinned from the previous one as of Andy suggested. --- drivers/spi/spi-dw.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 8334e6b35f89..d5ee5130601e 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -32,7 +32,7 @@ /* DW SPI controller capabilities */ #define DW_SPI_CAP_CS_OVERRIDE BIT(0) #define DW_SPI_CAP_KEEMBAY_MST BIT(1) -#define DW_SPI_CAP_DFS32 BIT(3) +#define DW_SPI_CAP_DFS32 BIT(2) /* Register offsets (Generic for both DWC APB SSI and DWC SSI IP-cores) */ #define DW_SPI_CTRLR0 0x00