From patchwork Wed Apr 14 05:51:51 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 421170 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 6323EC433ED for ; Wed, 14 Apr 2021 05:52:02 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 399DB613CF for ; Wed, 14 Apr 2021 05:52:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1347653AbhDNFwV (ORCPT ); Wed, 14 Apr 2021 01:52:21 -0400 Received: from mail-lf1-f47.google.com ([209.85.167.47]:33401 "EHLO mail-lf1-f47.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1347569AbhDNFwU (ORCPT ); Wed, 14 Apr 2021 01:52:20 -0400 Received: by mail-lf1-f47.google.com with SMTP id w8so22677523lfr.0; Tue, 13 Apr 2021 22:51:58 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=J7crRi/h8pPP48l770iPX9pdtxPTTqKfvzb9h8aF7ts=; b=DBetRYSAYrvxkeku5Y8FSYJFhmz/yUYModq2GHZ1G5/wzs4xUwCWckUxfq5o/4tVIs lW91Paf5/nCc6SwEvGaj4/ojOHWdN0lsIkOsKU4upJRNbPDVY1wVNAovBKoNeJSxSUIq aD87eZv2+Q6jTANmzbT6qjXI/6lNpvpCuK6YU2M3odlfA0UR2qnMv/Hg4xEujKaPA671 IgdEw7ZsfR+5PIhN4VPJBTZkOORTdgaiq0SmyRZx9IP3BWJnNyDLPirEZLd854ge0A1Q jJIucSK6tyFbUL0gJkERHMH9vfv/HazLO8FbyoPNQPJW30Z/ck2CXmE1yywvN09dpIz3 M/9w== X-Gm-Message-State: AOAM531aTnRkR2ZkDAADMCVTFf6z7fMzXWrm5tS6HxfO8Vn+PljfYc1d Ak0P+u88g+aifISm4g42rFA= X-Google-Smtp-Source: ABdhPJyqTcTw+IiTldrqdYI3IsyT0FSJzQXkDjFfn9L+wdSuHRldsKvDoCL6pJpn7ZLIK315R39BBw== X-Received: by 2002:ac2:4e83:: with SMTP id o3mr13196668lfr.616.1618379518193; Tue, 13 Apr 2021 22:51:58 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyydy-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::6]) by smtp.gmail.com with ESMTPSA id h17sm1059001lfu.153.2021.04.13.22.51.57 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 13 Apr 2021 22:51:57 -0700 (PDT) Date: Wed, 14 Apr 2021 08:51:51 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Mark Brown , Kees Cook , Andy Shevchenko , Zhang Rui , Guenter Roeck , "agross@kernel.org" , "devicetree@vger.kernel.org" , linux-power , "linux-kernel@vger.kernel.org" , "linux-renesas-soc@vger.kernel.org" , "linux-arm-msm@vger.kernel.org" , "bjorn.andersson@linaro.org" , "lgirdwood@gmail.com" , "robh+dt@kernel.org" Subject: [PATCH v7 1/9] dt_bindings: Add protection limit properties Message-ID: <169aee95444042a7557e630a028e86f1aed0dd62.1618377272.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Support specifying protection/error/warning limits for regulator over current, over temperature and over/under voltage. Most of the PMICs support only "protection" feature but few setups do also support error/warning level indications. On many ICs most of the protection limits can't actually be set. But for example the ampere limit for over-current protection on ROHM BD9576 can be configured - or feature can be completely disabled. Provide limit setting for all protections/errors for the sake of the completeness and do that using own properties for all so that not all users would need to set all levels when only one or few are supported. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring --- No changes since RFC-v2 --- .../bindings/regulator/regulator.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index 6d0bc9cd4040..a6ae9ecae5cc 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -117,6 +117,88 @@ properties: description: Enable over current protection. type: boolean + regulator-oc-protection-microamp: + description: Set over current protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-oc-error-microamp: + description: Set over current error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested. + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-oc-warn-microamp: + description: Set over current warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + + regulator-ov-protection-microvolt: + description: Set over voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-ov-error-microvolt: + description: Set over voltage error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-ov-warn-microvolt: + description: Set over voltage warning limit. This is a limit where hardware + is assumed still to be functional but approaching limit where it gets + damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-uv-protection-microvolt: + description: Set over under voltage protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. Limit is given as microvolt offset from + voltage set to regulator. + + regulator-uv-error-microvolt: + description: Set under voltage error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. Limit + is given as microvolt offset from voltage set to regulator. + + regulator-uv-warn-microvolt: + description: Set over under voltage warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where + it gets damaged. Recovery actions should be initiated. Zero can be passed + to disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. Limit is given as microvolt + offset from voltage set to regulator. + + regulator-temp-protection-kelvin: + description: Set over temperature protection limit. This is a limit where + hardware performs emergency shutdown. Zero can be passed to disable + protection and value '1' indicates that protection should be enabled but + limit setting can be omitted. + + regulator-temp-error-kelvin: + description: Set over temperature error limit. This is a limit where part of + the hardware propably is malfunctional and damage prevention is requested + Zero can be passed to disable error detection and value '1' indicates + that detection should be enabled but limit setting can be omitted. + + regulator-temp-warn-kelvin: + description: Set over temperature warning limit. This is a limit where + hardware is assumed still to be functional but approaching limit where it + gets damaged. Recovery actions should be initiated. Zero can be passed to + disable detection and value '1' indicates that detection should + be enabled but limit setting can be omitted. + regulator-active-discharge: description: | tristate, enable/disable active discharge of regulators. The values are: From patchwork Wed Apr 14 05:52:47 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 421169 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id A47FDC433B4 for ; Wed, 14 Apr 2021 05:53:09 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 832EC60240 for ; Wed, 14 Apr 2021 05:53:09 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1347569AbhDNFx2 (ORCPT ); Wed, 14 Apr 2021 01:53:28 -0400 Received: from mail-lj1-f170.google.com ([209.85.208.170]:39899 "EHLO mail-lj1-f170.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1347801AbhDNFxP (ORCPT ); Wed, 14 Apr 2021 01:53:15 -0400 Received: by mail-lj1-f170.google.com with SMTP id u4so21995477ljo.6; Tue, 13 Apr 2021 22:52:54 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=PF17I0NH3tYVAA1Iv/q8DPWO007JsrI/3wrjpR3VDTQ=; b=kK6ohouZ4UkyIjbGRwhMTiBkwG0HfqzEhxph13noG4AmDZ+aunuCYVWA9eST5apUH/ mblnZmI1t8yj+9i9qkw83m3kkaAhj5qHK1WmzuzH8z3kIeQwUuXFmLuVuTD8QmD/raiU WCgelVPR5VuT7w5AHvBaLGcxsgCPwRX/r98ieuo7ZJXBnu2uuxtzgSdDzEsw1agUxiO0 C2n1JxKYCw3OZVetgskN2Je2NNey3v3eo8mXoM6QpdAfVT27MFCmlD5yC00pIyZVdmWP Tc4ntYPpFu8E66fWzvhgF7+PEv4R5QTTHSxszjBZxDH3Z7fEnI3xsol3QTpgBVfd2c7A buxQ== X-Gm-Message-State: AOAM530e6sQGKcjwKD7s4spqv+0SbRy3XPdjaVRTsMue04Tm8EzuEiOb jR4PWaHhYy4/swvHamjqjgM= X-Google-Smtp-Source: ABdhPJyYM7EQLQ05u+txJ8bBXdlDINqA8zALgzkINnpaW5qMAG2eyLs+rC00Ur13wyACAiFIk7t/Fw== X-Received: by 2002:a05:651c:2049:: with SMTP id t9mr7603168ljo.370.1618379573649; Tue, 13 Apr 2021 22:52:53 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyydy-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::6]) by smtp.gmail.com with ESMTPSA id m6sm2853795lfu.308.2021.04.13.22.52.52 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 13 Apr 2021 22:52:53 -0700 (PDT) Date: Wed, 14 Apr 2021 08:52:47 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Mark Brown , Kees Cook , Andy Shevchenko , Zhang Rui , Guenter Roeck , "agross@kernel.org" , "devicetree@vger.kernel.org" , linux-power , "linux-kernel@vger.kernel.org" , "linux-renesas-soc@vger.kernel.org" , "linux-arm-msm@vger.kernel.org" , "bjorn.andersson@linaro.org" , "lgirdwood@gmail.com" , "robh+dt@kernel.org" Subject: [PATCH v7 3/9] regulator: add warning flags Message-ID: References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add 'warning' level events and error flags to regulator core. Current regulator core notifications are used to inform consumers about errors where HW is misbehaving in such way it is assumed to be broken/unrecoverable. There are PMICs which are designed for system(s) that may have use for regulator indications sent before HW is damaged so that some board/consumer specific recovery-event can be performed while continuing most of the normal operations. Add new WARNING level events and notifications to be used for that purpose. Signed-off-by: Matti Vaittinen --- No changes since RFC-v2 --- include/linux/regulator/consumer.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 20e84a84fb77..f72ca73631be 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -119,6 +119,16 @@ struct regulator_dev; #define REGULATOR_EVENT_PRE_DISABLE 0x400 #define REGULATOR_EVENT_ABORT_DISABLE 0x800 #define REGULATOR_EVENT_ENABLE 0x1000 +/* + * Following notifications should be emitted only if detected condition + * is such that the HW is likely to still be working but consumers should + * take a recovery action to prevent problems esacalating into errors. + */ +#define REGULATOR_EVENT_UNDER_VOLTAGE_WARN 0x2000 +#define REGULATOR_EVENT_OVER_CURRENT_WARN 0x4000 +#define REGULATOR_EVENT_OVER_VOLTAGE_WARN 0x8000 +#define REGULATOR_EVENT_OVER_TEMP_WARN 0x10000 +#define REGULATOR_EVENT_WARN_MASK 0x1E000 /* * Regulator errors that can be queried using regulator_get_error_flags @@ -138,6 +148,10 @@ struct regulator_dev; #define REGULATOR_ERROR_FAIL BIT(4) #define REGULATOR_ERROR_OVER_TEMP BIT(5) +#define REGULATOR_ERROR_UNDER_VOLTAGE_WARN BIT(6) +#define REGULATOR_ERROR_OVER_CURRENT_WARN BIT(7) +#define REGULATOR_ERROR_OVER_VOLTAGE_WARN BIT(8) +#define REGULATOR_ERROR_OVER_TEMP_WARN BIT(9) /** * struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event From patchwork Wed Apr 14 05:58:48 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 421168 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 815A8C43460 for ; Wed, 14 Apr 2021 05:58:59 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 49E93613D3 for ; Wed, 14 Apr 2021 05:58:59 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1348675AbhDNF7S (ORCPT ); Wed, 14 Apr 2021 01:59:18 -0400 Received: from mail-lf1-f46.google.com ([209.85.167.46]:34685 "EHLO mail-lf1-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1348022AbhDNF7S (ORCPT ); Wed, 14 Apr 2021 01:59:18 -0400 Received: by mail-lf1-f46.google.com with SMTP id n8so31268306lfh.1; Tue, 13 Apr 2021 22:58:55 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=VWtea8kVWvKbsceMLHx6Kw7rTpq2zn/bsHhQvwgyH80=; b=ex+tG87b4HQVXP8dJHNofZdpRif0dsQhMybT7xcC8uPbfCLrr8yw+rOtX7D+Q2maZQ HAEEyfYQCbsmSc5mYDMIH984/5xZPwBk/pQVC2cFsNXzdLyoSVtk8h7cnk4snCQDJPSW FSeTmAWeMGcRx4pB1A3PXoltDIWfzWexOJ4weQsrlbnB69FZEXW5zDHPSLGqAptTKdsc At9C9mlPC8g0mYj91+GWj7XLVL3pgqH4hL0EGGRkVZeaWN6NpgvuHUi8e3cefRuCfEdK iY/eBUiPGgQPRHiZucfnoZQ+8OGV7OddJnTIKi5NZfs172+bycZ5p/hnb9aRPJiB9C6M TLOg== X-Gm-Message-State: AOAM5322Kpl5jB6aSLrsxwUTUDKemdyiJGtVYe3b8ANJ7kG2nkxC7Ywb aGgSxdIPCCOYOXy5P2tUyQw= X-Google-Smtp-Source: ABdhPJzIQinbKTiXYxqENPhaEXtqF219dmA+cG2Vfeb2veWoIYGZyAUrBcnKjmjltxzPAFed9QWzvA== X-Received: by 2002:a05:6512:3155:: with SMTP id s21mr11300764lfi.606.1618379934632; Tue, 13 Apr 2021 22:58:54 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyydy-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::6]) by smtp.gmail.com with ESMTPSA id q25sm4044537lfn.42.2021.04.13.22.58.53 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 13 Apr 2021 22:58:54 -0700 (PDT) Date: Wed, 14 Apr 2021 08:58:48 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Mark Brown , Kees Cook , Andy Shevchenko , Zhang Rui , Guenter Roeck , "agross@kernel.org" , "devicetree@vger.kernel.org" , linux-power , "linux-kernel@vger.kernel.org" , "linux-renesas-soc@vger.kernel.org" , "linux-arm-msm@vger.kernel.org" , "bjorn.andersson@linaro.org" , "lgirdwood@gmail.com" , "robh+dt@kernel.org" Subject: [PATCH v7 5/9] regulator: add property parsing and callbacks to set protection limits Message-ID: <4110a3fa5114da92839e6d580acf2b05f024ab28.1618377272.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add DT property parsing code and setting callback for regulator over/under voltage, over-current and temperature error limits. Signed-off-by: Matti Vaittinen --- No changes since RFC-v3 --- drivers/regulator/core.c | 122 +++++++++++++++++++++- drivers/regulator/of_regulator.c | 58 ++++++++++ drivers/regulator/qcom-labibb-regulator.c | 10 +- drivers/regulator/qcom_spmi-regulator.c | 6 +- drivers/regulator/stpmic1_regulator.c | 20 +++- include/linux/regulator/driver.h | 41 +++++++- include/linux/regulator/machine.h | 26 +++++ 7 files changed, 274 insertions(+), 9 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 0c45814aabea..88926c407b02 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -1312,6 +1312,52 @@ static int machine_constraints_current(struct regulator_dev *rdev, static int _regulator_do_enable(struct regulator_dev *rdev); +static int notif_set_limit(struct regulator_dev *rdev, + int (*set)(struct regulator_dev *, int, int, bool), + int limit, int severity) +{ + bool enable; + + if (limit == REGULATOR_NOTIF_LIMIT_DISABLE) { + enable = false; + limit = 0; + } else { + enable = true; + } + + if (limit == REGULATOR_NOTIF_LIMIT_ENABLE) + limit = 0; + + return set(rdev, limit, severity, enable); +} + +static int handle_notify_limits(struct regulator_dev *rdev, + int (*set)(struct regulator_dev *, int, int, bool), + struct notification_limit *limits) +{ + int ret = 0; + + if (!set) + return -EOPNOTSUPP; + + if (limits->prot) + ret = notif_set_limit(rdev, set, limits->prot, + REGULATOR_SEVERITY_PROT); + if (ret) + return ret; + + if (limits->err) + ret = notif_set_limit(rdev, set, limits->err, + REGULATOR_SEVERITY_ERR); + if (ret) + return ret; + + if (limits->warn) + ret = notif_set_limit(rdev, set, limits->warn, + REGULATOR_SEVERITY_WARN); + + return ret; +} /** * set_machine_constraints - sets regulator constraints * @rdev: regulator source @@ -1397,9 +1443,27 @@ static int set_machine_constraints(struct regulator_dev *rdev) } } + /* + * Existing logic does not warn if over_current_protection is given as + * a constraint but driver does not support that. I think we should + * warn about this type of issues as it is possible someone changes + * PMIC on board to another type - and the another PMIC's driver does + * not support setting protection. Board composer may happily believe + * the DT limits are respected - especially if the new PMIC HW also + * supports protection but the driver does not. I won't change the logic + * without hearing more experienced opinion on this though. + * + * If warning is seen as a good idea then we can merge handling the + * over-curret protection and detection and get rid of this special + * handling. + */ if (rdev->constraints->over_current_protection && ops->set_over_current_protection) { - ret = ops->set_over_current_protection(rdev); + int lim = rdev->constraints->over_curr_limits.prot; + + ret = ops->set_over_current_protection(rdev, lim, + REGULATOR_SEVERITY_PROT, + true); if (ret < 0) { rdev_err(rdev, "failed to set over current protection: %pe\n", ERR_PTR(ret)); @@ -1407,6 +1471,62 @@ static int set_machine_constraints(struct regulator_dev *rdev) } } + if (rdev->constraints->over_current_detection) + ret = handle_notify_limits(rdev, + ops->set_over_current_protection, + &rdev->constraints->over_curr_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set over current limits: %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested over-current limits\n"); + } + + if (rdev->constraints->over_voltage_detection) + ret = handle_notify_limits(rdev, + ops->set_over_voltage_protection, + &rdev->constraints->over_voltage_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set over voltage limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested over voltage limits\n"); + } + + if (rdev->constraints->under_voltage_detection) + ret = handle_notify_limits(rdev, + ops->set_under_voltage_protection, + &rdev->constraints->under_voltage_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set under voltage limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested under voltage limits\n"); + } + + if (rdev->constraints->over_temp_detection) + ret = handle_notify_limits(rdev, + ops->set_thermal_protection, + &rdev->constraints->temp_limits); + if (ret) { + if (ret != -EOPNOTSUPP) { + rdev_err(rdev, "failed to set temperature limits %pe\n", + ERR_PTR(ret)); + return ret; + } + rdev_warn(rdev, + "IC does not support requested temperature limits\n"); + } + if (rdev->constraints->active_discharge && ops->set_active_discharge) { bool ad_state = (rdev->constraints->active_discharge == REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 564f928eb1db..b70fdc5c7000 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -21,6 +21,62 @@ static const char *const regulator_states[PM_SUSPEND_MAX + 1] = { [PM_SUSPEND_MAX] = "regulator-state-disk", }; +static void fill_limit(int *limit, int val) +{ + if (val) + if (val == 1) + *limit = REGULATOR_NOTIF_LIMIT_ENABLE; + else + *limit = val; + else + *limit = REGULATOR_NOTIF_LIMIT_DISABLE; +} + +static void of_get_regulator_prot_limits(struct device_node *np, + struct regulation_constraints *constraints) +{ + u32 pval; + int i; + static const char *const props[] = { + "regulator-oc-%s-microamp", + "regulator-ov-%s-microvolt", + "regulator-temp-%s-kelvin", + "regulator-uv-%s-microvolt", + }; + struct notification_limit *limits[] = { + &constraints->over_curr_limits, + &constraints->over_voltage_limits, + &constraints->temp_limits, + &constraints->under_voltage_limits, + }; + bool set[4] = {0}; + + /* Protection limits: */ + for (i = 0; i < ARRAY_SIZE(props); i++) { + char prop[255]; + bool found; + int j; + static const char *const lvl[] = { + "protection", "error", "warn" + }; + int *l[] = { + &limits[i]->prot, &limits[i]->err, &limits[i]->warn, + }; + + for (j = 0; j < ARRAY_SIZE(lvl); j++) { + snprintf(prop, 255, props[i], lvl[j]); + found = !of_property_read_u32(np, prop, &pval); + if (found) + fill_limit(l[j], pval); + set[i] |= found; + } + } + constraints->over_current_detection = set[0]; + constraints->over_voltage_detection = set[1]; + constraints->over_temp_detection = set[2]; + constraints->under_voltage_detection = set[3]; +} + static int of_get_regulation_constraints(struct device *dev, struct device_node *np, struct regulator_init_data **init_data, @@ -188,6 +244,8 @@ static int of_get_regulation_constraints(struct device *dev, constraints->over_current_protection = of_property_read_bool(np, "regulator-over-current-protection"); + of_get_regulator_prot_limits(np, constraints); + for (i = 0; i < ARRAY_SIZE(regulator_states); i++) { switch (i) { case PM_SUSPEND_MEM: diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c index de25e3279b4b..b3da0dc58782 100644 --- a/drivers/regulator/qcom-labibb-regulator.c +++ b/drivers/regulator/qcom-labibb-regulator.c @@ -307,13 +307,21 @@ static irqreturn_t qcom_labibb_ocp_isr(int irq, void *chip) return IRQ_HANDLED; } -static int qcom_labibb_set_ocp(struct regulator_dev *rdev) +static int qcom_labibb_set_ocp(struct regulator_dev *rdev, int lim, + int severity, bool enable) { struct labibb_regulator *vreg = rdev_get_drvdata(rdev); char *ocp_irq_name; u32 irq_flags = IRQF_ONESHOT; int irq_trig_low, ret; + /* + * labibb supports only protection - and does not support setting + * limit. Furthermore, we don't support disabling protection. + */ + if (lim || severity != REGULATOR_SEVERITY_PROT || !enable) + return -EINVAL; + /* If there is no OCP interrupt, there's nothing to set */ if (vreg->ocp_irq <= 0) return -EINVAL; diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c index e62e1d72d943..45b29c8856bd 100644 --- a/drivers/regulator/qcom_spmi-regulator.c +++ b/drivers/regulator/qcom_spmi-regulator.c @@ -594,11 +594,15 @@ static int spmi_regulator_vs_enable(struct regulator_dev *rdev) return regulator_enable_regmap(rdev); } -static int spmi_regulator_vs_ocp(struct regulator_dev *rdev) +static int spmi_regulator_vs_ocp(struct regulator_dev *rdev, int lim_uA, + int severity, bool enable) { struct spmi_regulator *vreg = rdev_get_drvdata(rdev); u8 reg = SPMI_VS_OCP_OVERRIDE; + if (lim_uA || !enable || severity != REGULATOR_SEVERITY_PROT) + return -EINVAL; + return spmi_vreg_write(vreg, SPMI_VS_REG_OCP, ®, 1); } diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c index cf10fdb72e32..2d7597c76e4a 100644 --- a/drivers/regulator/stpmic1_regulator.c +++ b/drivers/regulator/stpmic1_regulator.c @@ -32,7 +32,8 @@ struct stpmic1_regulator_cfg { static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode); static unsigned int stpmic1_get_mode(struct regulator_dev *rdev); -static int stpmic1_set_icc(struct regulator_dev *rdev); +static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity, + bool enable); static unsigned int stpmic1_map_mode(unsigned int mode); enum { @@ -491,11 +492,26 @@ static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode) STPMIC1_BUCK_MODE_LP, value); } -static int stpmic1_set_icc(struct regulator_dev *rdev) +static int stpmic1_set_icc(struct regulator_dev *rdev, int lim, int severity, + bool enable) { struct stpmic1_regulator_cfg *cfg = rdev_get_drvdata(rdev); struct regmap *regmap = rdev_get_regmap(rdev); + /* + * The code seems like one bit in a register controls whether OCP is + * enabled. So we might be able to turn it off here is if that + * was requested. I won't support this because I don't have the HW. + * Feel free to try and implement if you have the HW and need kernel + * to disable this. + * + * Also, I don't know if limit can be configured or if we support + * error/warning instead of protect. So I just keep existing logic + * and assume no. + */ + if (lim || severity != REGULATOR_SEVERITY_PROT || !enable) + return -EINVAL; + /* enable switch off in case of over current */ return regmap_update_bits(regmap, cfg->icc_reg, cfg->icc_mask, cfg->icc_mask); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index c2ef1c35a5dd..e7cd6c43788e 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -40,6 +40,15 @@ enum regulator_status { REGULATOR_STATUS_UNDEFINED, }; +enum regulator_detection_severity { + /* Hardware shut down voltage outputs if condition is detected */ + REGULATOR_SEVERITY_PROT, + /* Hardware is probably damaged/inoperable */ + REGULATOR_SEVERITY_ERR, + /* Hardware is still recoverable but recovery action must be taken */ + REGULATOR_SEVERITY_WARN, +}; + /* Initialize struct linear_range for regulators */ #define REGULATOR_LINEAR_RANGE(_min_uV, _min_sel, _max_sel, _step_uV) \ { \ @@ -78,8 +87,25 @@ enum regulator_status { * @get_current_limit: Get the configured limit for a current-limited regulator. * @set_input_current_limit: Configure an input limit. * - * @set_over_current_protection: Support capability of automatically shutting - * down when detecting an over current event. + * @set_over_current_protection: Support enabling of and setting limits for over + * current situation detection. Detection can be configured for three + * levels of severity. + * REGULATOR_SEVERITY_PROT should automatically shut down the regulator(s). + * REGULATOR_SEVERITY_ERR should indicate that over-current situation is + * caused by an unrecoverable error but HW does not perform + * automatic shut down. + * REGULATOR_SEVERITY_WARN should indicate situation where hardware is + * still believed to not be damaged but that a board sepcific + * recovery action is needed. If lim_uA is 0 the limit should not + * be changed but the detection should just be enabled/disabled as + * is requested. + * @set_over_voltage_protection: Support enabling of and setting limits for over + * voltage situation detection. Detection can be configured for same + * severities as over current protection. + * @set_under_voltage_protection: Support enabling of and setting limits for + * under situation detection. + * @set_thermal_protection: Support enabling of and setting limits for over + * temperature situation detection. * * @set_active_discharge: Set active discharge enable/disable of regulators. * @@ -143,8 +169,15 @@ struct regulator_ops { int (*get_current_limit) (struct regulator_dev *); int (*set_input_current_limit) (struct regulator_dev *, int lim_uA); - int (*set_over_current_protection) (struct regulator_dev *); - int (*set_active_discharge) (struct regulator_dev *, bool enable); + int (*set_over_current_protection)(struct regulator_dev *, int lim_uA, + int severity, bool enable); + int (*set_over_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_under_voltage_protection)(struct regulator_dev *, int lim_uV, + int severity, bool enable); + int (*set_thermal_protection)(struct regulator_dev *, int lim, + int severity, bool enable); + int (*set_active_discharge)(struct regulator_dev *, bool enable); /* enable/disable regulator */ int (*enable) (struct regulator_dev *); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 8a56f033b6cd..68b4a514a410 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -83,6 +83,14 @@ struct regulator_state { bool changeable; }; +#define REGULATOR_NOTIF_LIMIT_DISABLE -1 +#define REGULATOR_NOTIF_LIMIT_ENABLE -2 +struct notification_limit { + int prot; + int err; + int warn; +}; + /** * struct regulation_constraints - regulator operating constraints. * @@ -100,6 +108,11 @@ struct regulator_state { * @ilim_uA: Maximum input current. * @system_load: Load that isn't captured by any consumer requests. * + * @over_curr_limits: Limits for acting on over current. + * @over_voltage_limits: Limits for acting on over voltage. + * @under_voltage_limits: Limits for acting on under voltage. + * @temp_limits: Limits for acting on over temperature. + * @max_spread: Max possible spread between coupled regulators * @max_uV_step: Max possible step change in voltage * @valid_modes_mask: Mask of modes which may be configured by consumers. @@ -116,6 +129,11 @@ struct regulator_state { * @pull_down: Enable pull down when regulator is disabled. * @over_current_protection: Auto disable on over current event. * + * @over_current_detection: Configure over current limits. + * @over_voltage_detection: Configure over voltage limits. + * @under_voltage_detection: Configure under voltage limits. + * @over_temp_detection: Configure over temperature limits. + * * @input_uV: Input voltage for regulator when supplied by another regulator. * * @state_disk: State for regulator when system is suspended in disk mode. @@ -172,6 +190,10 @@ struct regulation_constraints { struct regulator_state state_disk; struct regulator_state state_mem; struct regulator_state state_standby; + struct notification_limit over_curr_limits; + struct notification_limit over_voltage_limits; + struct notification_limit under_voltage_limits; + struct notification_limit temp_limits; suspend_state_t initial_state; /* suspend state to set at init */ /* mode to set on startup */ @@ -193,6 +215,10 @@ struct regulation_constraints { unsigned soft_start:1; /* ramp voltage slowly */ unsigned pull_down:1; /* pull down resistor when regulator off */ unsigned over_current_protection:1; /* auto disable on over current */ + unsigned over_current_detection:1; /* notify on over current */ + unsigned over_voltage_detection:1; /* notify on over voltage */ + unsigned under_voltage_detection:1; /* notify on under voltage */ + unsigned over_temp_detection:1; /* notify on over temperature */ }; /** From patchwork Wed Apr 14 05:59:35 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 421167 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id C51D1C43460 for ; Wed, 14 Apr 2021 05:59:49 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9B96E613BB for ; Wed, 14 Apr 2021 05:59:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1348477AbhDNGAI (ORCPT ); Wed, 14 Apr 2021 02:00:08 -0400 Received: from mail-lf1-f42.google.com ([209.85.167.42]:43705 "EHLO mail-lf1-f42.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1348499AbhDNGAE (ORCPT ); Wed, 14 Apr 2021 02:00:04 -0400 Received: by mail-lf1-f42.google.com with SMTP id r8so31063863lfp.10; Tue, 13 Apr 2021 22:59:43 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=UrUQ/JeGdnvdb9myyj1EzrWvGz/eesqvAXMznpulEEY=; b=KUYKjp3SsWOUMopLrZS23/AkHY8wAhr4qAIWqJjVpdUNwMWTQjNDP8o6R4foV497oz 6Pzalpyi0Q5DDlqOmffge+k7Tl6ckoY1CKTBLXeulvR/fid8jvWgHyZVzKy6R8naV1Oe Q7XwIuxUfdcho/XOu9+ZfRHzhTy3/Kpd59XKqPrC4+oxXW0TdUuyxf8mjVxJXW7zmZSA DuaKYNuoLjGrXOPRpeoP1c12W9aRyEna+N2EyPHtHKRsfHF6/0GREAxFcWI7m5ZPXkru 9LNGoc44d2Cs2VSk4yk4fb+JlxQ+NsfMOy7o87TGLKjwamcH+DrmBkBPx+jDxNOqGbno ReCw== X-Gm-Message-State: AOAM532twCuNxNwxvCDImLZbSg8m1UCRWOUw9ruAwJKJGQOJF59PG+MN 1BkRSS2IJ9RC6npovu+ttYZ82XztSuqcAQ== X-Google-Smtp-Source: ABdhPJwS6UYxQp6pe++FOmTkyJC0HOb+F/4d4ODiwGjGI425ftaLoeik8YKVSGKs/IXFwW2eotfVwQ== X-Received: by 2002:a05:6512:1318:: with SMTP id x24mr24012970lfu.376.1618379982281; Tue, 13 Apr 2021 22:59:42 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyydy-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::6]) by smtp.gmail.com with ESMTPSA id a17sm3810008lfg.20.2021.04.13.22.59.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 13 Apr 2021 22:59:41 -0700 (PDT) Date: Wed, 14 Apr 2021 08:59:35 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Mark Brown , Kees Cook , Andy Shevchenko , Zhang Rui , Guenter Roeck , "agross@kernel.org" , "devicetree@vger.kernel.org" , linux-power , "linux-kernel@vger.kernel.org" , "linux-renesas-soc@vger.kernel.org" , "linux-arm-msm@vger.kernel.org" , "bjorn.andersson@linaro.org" , "lgirdwood@gmail.com" , "robh+dt@kernel.org" Subject: [PATCH v7 7/9] regulator: bd9576: Support error reporting Message-ID: <41ab5b3a95ec922bfa4a7818e91a687e6f4dbeee.1618377272.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org BD9573 and BD9576 support set of "protection" interrupts for "fatal" issues. Those lead to SOC reset as PMIC shuts the power outputs. Thus there is no relevant IRQ handling for them. Few "detection" interrupts were added to the BD9576 with the idea that SOC could take some recovery-action before error gets unrecoverable. Add support for over and under voltage detection for Vout1 ... Vout4 and VoutL1. Add over-current detection for VoutS1 and finally a thermal warning (common for all regulators) which alerts 30 C before temperature reaches the thermal shutdown point. This way consumer drivers can build error-recovery mechanisms. Unfortunately the BD9576 interrupt logic was not re-evaluated. IRQs are not designed to be properly acknowleged - and IRQ line is kept active for whole duration of error condition (in comparison to informing only about state change). Signed-off-by: Matti Vaittinen --- No changes since RFC-v3 --- drivers/regulator/bd9576-regulator.c | 1056 ++++++++++++++++++++++---- 1 file changed, 929 insertions(+), 127 deletions(-) diff --git a/drivers/regulator/bd9576-regulator.c b/drivers/regulator/bd9576-regulator.c index a8b5832a5a1b..0d55d383d2aa 100644 --- a/drivers/regulator/bd9576-regulator.c +++ b/drivers/regulator/bd9576-regulator.c @@ -2,10 +2,10 @@ // Copyright (C) 2020 ROHM Semiconductors // ROHM BD9576MUF/BD9573MUF regulator driver -#include #include #include #include +#include #include #include #include @@ -16,11 +16,18 @@ #include #include #include +#include +#include #define BD957X_VOUTS1_VOLT 3300000 #define BD957X_VOUTS4_BASE_VOLT 1030000 #define BD957X_VOUTS34_NUM_VOLT 32 +#define BD9576_THERM_IRQ_MASK_TW BIT(5) +#define BD9576_xVD_IRQ_MASK_VOUTL1 BIT(5) +#define BD9576_UVD_IRQ_MASK_VOUTS1_OCW BIT(6) +#define BD9576_xVD_IRQ_MASK_VOUT1TO4 0x0F + static int vout1_volt_table[] = {5000000, 4900000, 4800000, 4700000, 4600000, 4500000, 4500000, 4500000, 5000000, 5100000, 5200000, 5300000, 5400000, 5500000, 5500000, @@ -36,9 +43,85 @@ static int voutl1_volt_table[] = {2500000, 2540000, 2580000, 2620000, 2660000, 2420000, 2380000, 2340000, 2300000, 2260000, 2220000}; +static const struct linear_range vout1_xvd_ranges[] = { + REGULATOR_LINEAR_RANGE(225000, 0x01, 0x2b, 0), + REGULATOR_LINEAR_RANGE(225000, 0x2c, 0x54, 5000), + REGULATOR_LINEAR_RANGE(425000, 0x55, 0x7f, 0), +}; + +static const struct linear_range vout234_xvd_ranges[] = { + REGULATOR_LINEAR_RANGE(17000, 0x01, 0x0f, 0), + REGULATOR_LINEAR_RANGE(17000, 0x10, 0x6d, 1000), + REGULATOR_LINEAR_RANGE(110000, 0x6e, 0x7f, 0), +}; + +static const struct linear_range voutL1_xvd_ranges[] = { + REGULATOR_LINEAR_RANGE(34000, 0x01, 0x0f, 0), + REGULATOR_LINEAR_RANGE(34000, 0x10, 0x6d, 2000), + REGULATOR_LINEAR_RANGE(220000, 0x6e, 0x7f, 0), +}; + +static struct linear_range voutS1_ocw_ranges_internal[] = { + REGULATOR_LINEAR_RANGE(200000, 0x01, 0x04, 0), + REGULATOR_LINEAR_RANGE(250000, 0x05, 0x18, 50000), + REGULATOR_LINEAR_RANGE(1200000, 0x19, 0x3f, 0), +}; + +static struct linear_range voutS1_ocw_ranges[] = { + REGULATOR_LINEAR_RANGE(50000, 0x01, 0x04, 0), + REGULATOR_LINEAR_RANGE(60000, 0x05, 0x18, 10000), + REGULATOR_LINEAR_RANGE(250000, 0x19, 0x3f, 0), +}; + +static struct linear_range voutS1_ocp_ranges_internal[] = { + REGULATOR_LINEAR_RANGE(300000, 0x01, 0x06, 0), + REGULATOR_LINEAR_RANGE(350000, 0x7, 0x1b, 50000), + REGULATOR_LINEAR_RANGE(1350000, 0x1c, 0x3f, 0), +}; + +static struct linear_range voutS1_ocp_ranges[] = { + REGULATOR_LINEAR_RANGE(70000, 0x01, 0x06, 0), + REGULATOR_LINEAR_RANGE(80000, 0x7, 0x1b, 10000), + REGULATOR_LINEAR_RANGE(280000, 0x1c, 0x3f, 0), +}; + struct bd957x_regulator_data { struct regulator_desc desc; int base_voltage; + struct regulator_dev *rdev; + int ovd_notif; + int uvd_notif; + int temp_notif; + int ovd_err; + int uvd_err; + int temp_err; + const struct linear_range *xvd_ranges; + int num_xvd_ranges; + bool oc_supported; + unsigned int ovd_reg; + unsigned int uvd_reg; + unsigned int xvd_mask; + unsigned int ocp_reg; + unsigned int ocp_mask; + unsigned int ocw_reg; + unsigned int ocw_mask; + unsigned int ocw_rfet; +}; + +#define BD9576_NUM_REGULATORS 6 +#define BD9576_NUM_OVD_REGULATORS 5 + +struct bd957x_data { + struct bd957x_regulator_data regulator_data[BD9576_NUM_REGULATORS]; + struct regmap *regmap; + struct delayed_work therm_irq_suppress; + struct delayed_work ovd_irq_suppress; + struct delayed_work uvd_irq_suppress; + unsigned int therm_irq; + unsigned int ovd_irq; + unsigned int uvd_irq; + spinlock_t err_lock; + int regulator_global_err; }; static int bd957x_vout34_list_voltage(struct regulator_dev *rdev, @@ -72,151 +155,784 @@ static int bd957x_list_voltage(struct regulator_dev *rdev, return desc->volt_table[index]; } -static const struct regulator_ops bd957x_vout34_ops = { +static void bd9576_fill_ovd_flags(struct bd957x_regulator_data *data, + bool warn) +{ + if (warn) { + data->ovd_notif = REGULATOR_EVENT_OVER_VOLTAGE_WARN; + data->ovd_err = REGULATOR_ERROR_OVER_VOLTAGE_WARN; + } else { + data->ovd_notif = REGULATOR_EVENT_REGULATION_OUT; + data->ovd_err = REGULATOR_ERROR_REGULATION_OUT; + } +} + +static void bd9576_fill_ocp_flags(struct bd957x_regulator_data *data, + bool warn) +{ + if (warn) { + data->uvd_notif = REGULATOR_EVENT_OVER_CURRENT_WARN; + data->uvd_err = REGULATOR_ERROR_OVER_CURRENT_WARN; + } else { + data->uvd_notif = REGULATOR_EVENT_OVER_CURRENT; + data->uvd_err = REGULATOR_ERROR_OVER_CURRENT; + } +} + +static void bd9576_fill_uvd_flags(struct bd957x_regulator_data *data, + bool warn) +{ + if (warn) { + data->uvd_notif = REGULATOR_EVENT_UNDER_VOLTAGE_WARN; + data->uvd_err = REGULATOR_ERROR_UNDER_VOLTAGE_WARN; + } else { + data->uvd_notif = REGULATOR_EVENT_UNDER_VOLTAGE; + data->uvd_err = REGULATOR_ERROR_UNDER_VOLTAGE; + } +} + +static void bd9576_fill_temp_flags(struct bd957x_regulator_data *data, + bool enable, bool warn) +{ + if (!enable) { + data->temp_notif = 0; + data->temp_err = 0; + } else if (warn) { + data->temp_notif = REGULATOR_EVENT_OVER_TEMP_WARN; + data->temp_err = REGULATOR_ERROR_OVER_TEMP_WARN; + } else { + data->temp_notif = REGULATOR_EVENT_OVER_TEMP; + data->temp_err = REGULATOR_ERROR_OVER_TEMP; + } +} + +static int bd9576_set_limit(const struct linear_range *r, int num_ranges, + struct regmap *regmap, int reg, int mask, int lim) +{ + int ret; + bool found; + int sel = 0; + + if (lim) { + + ret = linear_range_get_selector_low_array(r, num_ranges, + lim, &sel, &found); + if (ret) + return ret; + + if (!found) + dev_warn(regmap_get_device(regmap), + "limit %d out of range. Setting lower\n", + lim); + } + + return regmap_update_bits(regmap, reg, mask, sel); +} + +static bool check_ocp_flag_mismatch(struct regulator_dev *rdev, int severity, + struct bd957x_regulator_data *r) +{ + if ((severity == REGULATOR_SEVERITY_ERR && + r->uvd_notif != REGULATOR_EVENT_OVER_CURRENT) || + (severity == REGULATOR_SEVERITY_WARN && + r->uvd_notif != REGULATOR_EVENT_OVER_CURRENT_WARN)) { + dev_warn(rdev_get_dev(rdev), + "Can't support both OCP WARN and ERR\n"); + /* Do not overwrite ERR config with WARN */ + if (severity == REGULATOR_SEVERITY_WARN) + return true; + + bd9576_fill_ocp_flags(r, 0); + } + + return false; +} + +static bool check_uvd_flag_mismatch(struct regulator_dev *rdev, int severity, + struct bd957x_regulator_data *r) +{ + if ((severity == REGULATOR_SEVERITY_ERR && + r->uvd_notif != REGULATOR_EVENT_UNDER_VOLTAGE) || + (severity == REGULATOR_SEVERITY_WARN && + r->uvd_notif != REGULATOR_EVENT_UNDER_VOLTAGE_WARN)) { + dev_warn(rdev_get_dev(rdev), + "Can't support both UVD WARN and ERR\n"); + if (severity == REGULATOR_SEVERITY_WARN) + return true; + + bd9576_fill_uvd_flags(r, 0); + } + + return false; +} + +static bool check_ovd_flag_mismatch(struct regulator_dev *rdev, int severity, + struct bd957x_regulator_data *r) +{ + if ((severity == REGULATOR_SEVERITY_ERR && + r->ovd_notif != REGULATOR_EVENT_REGULATION_OUT) || + (severity == REGULATOR_SEVERITY_WARN && + r->ovd_notif != REGULATOR_EVENT_OVER_VOLTAGE_WARN)) { + dev_warn(rdev_get_dev(rdev), + "Can't support both OVD WARN and ERR\n"); + if (severity == REGULATOR_SEVERITY_WARN) + return true; + + bd9576_fill_ovd_flags(r, 0); + } + + return false; +} + +static bool check_temp_flag_mismatch(struct regulator_dev *rdev, int severity, + struct bd957x_regulator_data *r) +{ + if ((severity == REGULATOR_SEVERITY_ERR && + r->ovd_notif != REGULATOR_EVENT_OVER_TEMP) || + (severity == REGULATOR_SEVERITY_WARN && + r->ovd_notif != REGULATOR_EVENT_OVER_TEMP_WARN)) { + dev_warn(rdev_get_dev(rdev), + "Can't support both thermal WARN and ERR\n"); + if (severity == REGULATOR_SEVERITY_WARN) + return true; + } + + return false; +} + +static int bd9576_set_ocp(struct regulator_dev *rdev, int lim_uA, int severity, + bool enable) +{ + struct bd957x_data *d; + struct bd957x_regulator_data *r; + int reg, mask; + int Vfet, rfet; + const struct linear_range *range; + int num_ranges; + + if ((lim_uA && !enable) || (!lim_uA && enable)) + return -EINVAL; + + r = container_of(rdev->desc, struct bd957x_regulator_data, desc); + if (!r->oc_supported) + return -EINVAL; + + d = rdev_get_drvdata(rdev); + + if (severity == REGULATOR_SEVERITY_PROT) { + reg = r->ocp_reg; + mask = r->ocp_mask; + if (r->ocw_rfet) { + range = voutS1_ocp_ranges; + num_ranges = ARRAY_SIZE(voutS1_ocp_ranges); + rfet = r->ocw_rfet / 1000; + } else { + range = voutS1_ocp_ranges_internal; + num_ranges = ARRAY_SIZE(voutS1_ocp_ranges_internal); + /* Internal values are already micro-amperes */ + rfet = 1000; + } + } else { + reg = r->ocw_reg; + mask = r->ocw_mask; + + if (r->ocw_rfet) { + range = voutS1_ocw_ranges; + num_ranges = ARRAY_SIZE(voutS1_ocw_ranges); + rfet = r->ocw_rfet / 1000; + } else { + range = voutS1_ocw_ranges_internal; + num_ranges = ARRAY_SIZE(voutS1_ocw_ranges_internal); + /* Internal values are already micro-amperes */ + rfet = 1000; + } + + /* We abuse uvd fields for OCW on VoutS1 */ + if (r->uvd_notif) { + /* + * If both warning and error are requested, prioritize + * ERROR configuration + */ + if (check_ocp_flag_mismatch(rdev, severity, r)) + return 0; + } else { + bool warn = severity == REGULATOR_SEVERITY_WARN; + + bd9576_fill_ocp_flags(r, warn); + } + } + + /* + * limits are given in uA, rfet is mOhm + * Divide lim_uA by 1000 to get Vfet in uV. + * (We expect both Rfet and limit uA to be magnitude of hundreds of + * milli Amperes & milli Ohms => we should still have decent accuracy) + */ + Vfet = lim_uA/1000 * rfet; + + return bd9576_set_limit(range, num_ranges, d->regmap, + reg, mask, Vfet); +} + +static int bd9576_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity, + bool enable) +{ + struct bd957x_data *d; + struct bd957x_regulator_data *r; + int mask, reg; + + if (severity == REGULATOR_SEVERITY_PROT) { + if (!enable || lim_uV) + return -EINVAL; + return 0; + } + + /* + * BD9576 has enable control as a special value in limit reg. Can't + * set limit but keep feature disabled or enable W/O given limit. + */ + if ((lim_uV && !enable) || (!lim_uV && enable)) + return -EINVAL; + + r = container_of(rdev->desc, struct bd957x_regulator_data, desc); + d = rdev_get_drvdata(rdev); + + mask = r->xvd_mask; + reg = r->uvd_reg; + /* + * Check that there is no mismatch for what the detection IRQs are to + * be used. + */ + if (r->uvd_notif) { + if (check_uvd_flag_mismatch(rdev, severity, r)) + return 0; + } else { + bd9576_fill_uvd_flags(r, severity == REGULATOR_SEVERITY_WARN); + } + + return bd9576_set_limit(r->xvd_ranges, r->num_xvd_ranges, d->regmap, + reg, mask, lim_uV); +} + +static int bd9576_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity, + bool enable) +{ + struct bd957x_data *d; + struct bd957x_regulator_data *r; + int mask, reg; + + if (severity == REGULATOR_SEVERITY_PROT) { + if (!enable || lim_uV) + return -EINVAL; + return 0; + } + + /* + * BD9576 has enable control as a special value in limit reg. Can't + * set limit but keep feature disabled or enable W/O given limit. + */ + if ((lim_uV && !enable) || (!lim_uV && enable)) + return -EINVAL; + + r = container_of(rdev->desc, struct bd957x_regulator_data, desc); + d = rdev_get_drvdata(rdev); + + mask = r->xvd_mask; + reg = r->ovd_reg; + /* + * Check that there is no mismatch for what the detection IRQs are to + * be used. + */ + if (r->ovd_notif) { + if (check_ovd_flag_mismatch(rdev, severity, r)) + return 0; + } else { + bd9576_fill_ovd_flags(r, severity == REGULATOR_SEVERITY_WARN); + } + + return bd9576_set_limit(r->xvd_ranges, r->num_xvd_ranges, d->regmap, + reg, mask, lim_uV); +} + + +static int bd9576_set_tw(struct regulator_dev *rdev, int lim, int severity, + bool enable) +{ + struct bd957x_data *d; + struct bd957x_regulator_data *r; + int i; + + /* + * BD9576MUF has fixed temperature limits + * The detection can only be enabled/disabled + */ + if (lim) + return -EINVAL; + + /* Protection can't be disabled */ + if (severity == REGULATOR_SEVERITY_PROT) { + if (!enable) + return -EINVAL; + else + return 0; + } + + r = container_of(rdev->desc, struct bd957x_regulator_data, desc); + d = rdev_get_drvdata(rdev); + + /* + * Check that there is no mismatch for what the detection IRQs are to + * be used. + */ + if (r->temp_notif) + if (check_temp_flag_mismatch(rdev, severity, r)) + return 0; + + bd9576_fill_temp_flags(r, enable, severity == REGULATOR_SEVERITY_WARN); + + if (enable) + return regmap_update_bits(d->regmap, BD957X_REG_INT_THERM_MASK, + BD9576_THERM_IRQ_MASK_TW, 0); + + /* + * If any of the regulators is interested in thermal warning we keep IRQ + * enabled. + */ + for (i = 0; i < BD9576_NUM_REGULATORS; i++) + if (d->regulator_data[i].temp_notif) + return 0; + + return regmap_update_bits(d->regmap, BD957X_REG_INT_THERM_MASK, + BD9576_THERM_IRQ_MASK_TW, + BD9576_THERM_IRQ_MASK_TW); +} + +static const struct regulator_ops bd9573_vout34_ops = { + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = bd957x_vout34_list_voltage, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd9576_vout34_ops = { .is_enabled = regulator_is_enabled_regmap, .list_voltage = bd957x_vout34_list_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_over_voltage_protection = bd9576_set_ovp, + .set_under_voltage_protection = bd9576_set_uvp, + .set_thermal_protection = bd9576_set_tw, }; -static const struct regulator_ops bd957X_vouts1_regulator_ops = { +static const struct regulator_ops bd9573_vouts1_regulator_ops = { .is_enabled = regulator_is_enabled_regmap, }; -static const struct regulator_ops bd957x_ops = { +static const struct regulator_ops bd9576_vouts1_regulator_ops = { + .is_enabled = regulator_is_enabled_regmap, + .set_over_current_protection = bd9576_set_ocp, +}; + +static const struct regulator_ops bd9573_ops = { + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = bd957x_list_voltage, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd9576_ops = { .is_enabled = regulator_is_enabled_regmap, .list_voltage = bd957x_list_voltage, .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_over_voltage_protection = bd9576_set_ovp, + .set_under_voltage_protection = bd9576_set_uvp, + .set_thermal_protection = bd9576_set_tw, +}; + +static const struct regulator_ops *bd9573_ops_arr[] = { + [BD957X_VD50] = &bd9573_ops, + [BD957X_VD18] = &bd9573_ops, + [BD957X_VDDDR] = &bd9573_vout34_ops, + [BD957X_VD10] = &bd9573_vout34_ops, + [BD957X_VOUTL1] = &bd9573_ops, + [BD957X_VOUTS1] = &bd9573_vouts1_regulator_ops, }; -static struct bd957x_regulator_data bd9576_regulators[] = { - { - .desc = { - .name = "VD50", - .of_match = of_match_ptr("regulator-vd50"), - .regulators_node = of_match_ptr("regulators"), - .id = BD957X_VD50, - .type = REGULATOR_VOLTAGE, - .ops = &bd957x_ops, - .volt_table = &vout1_volt_table[0], - .n_voltages = ARRAY_SIZE(vout1_volt_table), - .vsel_reg = BD957X_REG_VOUT1_TUNE, - .vsel_mask = BD957X_MASK_VOUT1_TUNE, - .enable_reg = BD957X_REG_POW_TRIGGER1, - .enable_mask = BD957X_REGULATOR_EN_MASK, - .enable_val = BD957X_REGULATOR_DIS_VAL, - .enable_is_inverted = true, - .owner = THIS_MODULE, +static const struct regulator_ops *bd9576_ops_arr[] = { + [BD957X_VD50] = &bd9576_ops, + [BD957X_VD18] = &bd9576_ops, + [BD957X_VDDDR] = &bd9576_vout34_ops, + [BD957X_VD10] = &bd9576_vout34_ops, + [BD957X_VOUTL1] = &bd9576_ops, + [BD957X_VOUTS1] = &bd9576_vouts1_regulator_ops, +}; + +static int vouts1_get_fet_res(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct bd957x_regulator_data *data; + int ret; + u32 uohms; + + data = container_of(desc, struct bd957x_regulator_data, desc); + + ret = of_property_read_u32(np, "rohm,ocw-fet-ron-micro-ohms", &uohms); + if (ret) { + if (ret != -EINVAL) + return ret; + + return 0; + } + data->ocw_rfet = uohms; + return 0; +} + +static struct bd957x_data bd957x_regulators = { + .regulator_data = { + { + .desc = { + .name = "VD50", + .of_match = of_match_ptr("regulator-vd50"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VD50, + .type = REGULATOR_VOLTAGE, + .volt_table = &vout1_volt_table[0], + .n_voltages = ARRAY_SIZE(vout1_volt_table), + .vsel_reg = BD957X_REG_VOUT1_TUNE, + .vsel_mask = BD957X_MASK_VOUT1_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER1, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + .xvd_ranges = vout1_xvd_ranges, + .num_xvd_ranges = ARRAY_SIZE(vout1_xvd_ranges), + .ovd_reg = BD9576_REG_VOUT1_OVD, + .uvd_reg = BD9576_REG_VOUT1_UVD, + .xvd_mask = BD9576_MASK_XVD, }, - }, - { - .desc = { - .name = "VD18", - .of_match = of_match_ptr("regulator-vd18"), - .regulators_node = of_match_ptr("regulators"), - .id = BD957X_VD18, - .type = REGULATOR_VOLTAGE, - .ops = &bd957x_ops, - .volt_table = &vout2_volt_table[0], - .n_voltages = ARRAY_SIZE(vout2_volt_table), - .vsel_reg = BD957X_REG_VOUT2_TUNE, - .vsel_mask = BD957X_MASK_VOUT2_TUNE, - .enable_reg = BD957X_REG_POW_TRIGGER2, - .enable_mask = BD957X_REGULATOR_EN_MASK, - .enable_val = BD957X_REGULATOR_DIS_VAL, - .enable_is_inverted = true, - .owner = THIS_MODULE, + { + .desc = { + .name = "VD18", + .of_match = of_match_ptr("regulator-vd18"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VD18, + .type = REGULATOR_VOLTAGE, + .volt_table = &vout2_volt_table[0], + .n_voltages = ARRAY_SIZE(vout2_volt_table), + .vsel_reg = BD957X_REG_VOUT2_TUNE, + .vsel_mask = BD957X_MASK_VOUT2_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER2, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + .xvd_ranges = vout234_xvd_ranges, + .num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges), + .ovd_reg = BD9576_REG_VOUT2_OVD, + .uvd_reg = BD9576_REG_VOUT2_UVD, + .xvd_mask = BD9576_MASK_XVD, }, - }, - { - .desc = { - .name = "VDDDR", - .of_match = of_match_ptr("regulator-vdddr"), - .regulators_node = of_match_ptr("regulators"), - .id = BD957X_VDDDR, - .ops = &bd957x_vout34_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = BD957X_VOUTS34_NUM_VOLT, - .vsel_reg = BD957X_REG_VOUT3_TUNE, - .vsel_mask = BD957X_MASK_VOUT3_TUNE, - .enable_reg = BD957X_REG_POW_TRIGGER3, - .enable_mask = BD957X_REGULATOR_EN_MASK, - .enable_val = BD957X_REGULATOR_DIS_VAL, - .enable_is_inverted = true, - .owner = THIS_MODULE, + { + .desc = { + .name = "VDDDR", + .of_match = of_match_ptr("regulator-vdddr"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VDDDR, + .type = REGULATOR_VOLTAGE, + .n_voltages = BD957X_VOUTS34_NUM_VOLT, + .vsel_reg = BD957X_REG_VOUT3_TUNE, + .vsel_mask = BD957X_MASK_VOUT3_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER3, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + .ovd_reg = BD9576_REG_VOUT3_OVD, + .uvd_reg = BD9576_REG_VOUT3_UVD, + .xvd_mask = BD9576_MASK_XVD, + .xvd_ranges = vout234_xvd_ranges, + .num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges), }, - }, - { - .desc = { - .name = "VD10", - .of_match = of_match_ptr("regulator-vd10"), - .regulators_node = of_match_ptr("regulators"), - .id = BD957X_VD10, - .ops = &bd957x_vout34_ops, - .type = REGULATOR_VOLTAGE, - .fixed_uV = BD957X_VOUTS4_BASE_VOLT, - .n_voltages = BD957X_VOUTS34_NUM_VOLT, - .vsel_reg = BD957X_REG_VOUT4_TUNE, - .vsel_mask = BD957X_MASK_VOUT4_TUNE, - .enable_reg = BD957X_REG_POW_TRIGGER4, - .enable_mask = BD957X_REGULATOR_EN_MASK, - .enable_val = BD957X_REGULATOR_DIS_VAL, - .enable_is_inverted = true, - .owner = THIS_MODULE, + { + .desc = { + .name = "VD10", + .of_match = of_match_ptr("regulator-vd10"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VD10, + .type = REGULATOR_VOLTAGE, + .fixed_uV = BD957X_VOUTS4_BASE_VOLT, + .n_voltages = BD957X_VOUTS34_NUM_VOLT, + .vsel_reg = BD957X_REG_VOUT4_TUNE, + .vsel_mask = BD957X_MASK_VOUT4_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGER4, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + .xvd_ranges = vout234_xvd_ranges, + .num_xvd_ranges = ARRAY_SIZE(vout234_xvd_ranges), + .ovd_reg = BD9576_REG_VOUT4_OVD, + .uvd_reg = BD9576_REG_VOUT4_UVD, + .xvd_mask = BD9576_MASK_XVD, }, - }, - { - .desc = { - .name = "VOUTL1", - .of_match = of_match_ptr("regulator-voutl1"), - .regulators_node = of_match_ptr("regulators"), - .id = BD957X_VOUTL1, - .ops = &bd957x_ops, - .type = REGULATOR_VOLTAGE, - .volt_table = &voutl1_volt_table[0], - .n_voltages = ARRAY_SIZE(voutl1_volt_table), - .vsel_reg = BD957X_REG_VOUTL1_TUNE, - .vsel_mask = BD957X_MASK_VOUTL1_TUNE, - .enable_reg = BD957X_REG_POW_TRIGGERL1, - .enable_mask = BD957X_REGULATOR_EN_MASK, - .enable_val = BD957X_REGULATOR_DIS_VAL, - .enable_is_inverted = true, - .owner = THIS_MODULE, + { + .desc = { + .name = "VOUTL1", + .of_match = of_match_ptr("regulator-voutl1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VOUTL1, + .type = REGULATOR_VOLTAGE, + .volt_table = &voutl1_volt_table[0], + .n_voltages = ARRAY_SIZE(voutl1_volt_table), + .vsel_reg = BD957X_REG_VOUTL1_TUNE, + .vsel_mask = BD957X_MASK_VOUTL1_TUNE, + .enable_reg = BD957X_REG_POW_TRIGGERL1, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + }, + .xvd_ranges = voutL1_xvd_ranges, + .num_xvd_ranges = ARRAY_SIZE(voutL1_xvd_ranges), + .ovd_reg = BD9576_REG_VOUTL1_OVD, + .uvd_reg = BD9576_REG_VOUTL1_UVD, + .xvd_mask = BD9576_MASK_XVD, }, - }, - { - .desc = { - .name = "VOUTS1", - .of_match = of_match_ptr("regulator-vouts1"), - .regulators_node = of_match_ptr("regulators"), - .id = BD957X_VOUTS1, - .ops = &bd957X_vouts1_regulator_ops, - .type = REGULATOR_VOLTAGE, - .n_voltages = 1, - .fixed_uV = BD957X_VOUTS1_VOLT, - .enable_reg = BD957X_REG_POW_TRIGGERS1, - .enable_mask = BD957X_REGULATOR_EN_MASK, - .enable_val = BD957X_REGULATOR_DIS_VAL, - .enable_is_inverted = true, - .owner = THIS_MODULE, + { + .desc = { + .name = "VOUTS1", + .of_match = of_match_ptr("regulator-vouts1"), + .regulators_node = of_match_ptr("regulators"), + .id = BD957X_VOUTS1, + .type = REGULATOR_VOLTAGE, + .n_voltages = 1, + .fixed_uV = BD957X_VOUTS1_VOLT, + .enable_reg = BD957X_REG_POW_TRIGGERS1, + .enable_mask = BD957X_REGULATOR_EN_MASK, + .enable_val = BD957X_REGULATOR_DIS_VAL, + .enable_is_inverted = true, + .owner = THIS_MODULE, + .of_parse_cb = vouts1_get_fet_res, + }, + .oc_supported = true, + .ocw_reg = BD9576_REG_VOUT1S_OCW, + .ocw_mask = BD9576_MASK_VOUT1S_OCW, + .ocp_reg = BD9576_REG_VOUT1S_OCP, + .ocp_mask = BD9576_MASK_VOUT1S_OCP, }, }, }; +static int bd9576_renable(struct regulator_irq_data *rid, int reg, int mask) +{ + int val, ret; + struct bd957x_data *d = (struct bd957x_data *)rid->data; + + ret = regmap_read(d->regmap, reg, &val); + if (ret) + return REGULATOR_FAILED_RETRY; + + if (rid->opaque && rid->opaque == (val & mask)) { + /* + * It seems we stil have same status. Ack and return + * information that we are still out of limits and core + * should not enable IRQ + */ + regmap_write(d->regmap, reg, mask & val); + return REGULATOR_ERROR_ON; + } + rid->opaque = 0; + /* + * Status was changed. Either prolem was solved or we have new issues. + * Let's re-enable IRQs and be prepared to report problems again + */ + return REGULATOR_ERROR_CLEARED; +} + +static int bd9576_uvd_renable(struct regulator_irq_data *rid) +{ + return bd9576_renable(rid, BD957X_REG_INT_UVD_STAT, UVD_IRQ_VALID_MASK); +} + +static int bd9576_ovd_renable(struct regulator_irq_data *rid) +{ + return bd9576_renable(rid, BD957X_REG_INT_OVD_STAT, OVD_IRQ_VALID_MASK); +} + +static int bd9576_temp_renable(struct regulator_irq_data *rid) +{ + return bd9576_renable(rid, BD957X_REG_INT_THERM_STAT, + BD9576_THERM_IRQ_MASK_TW); +} + +static int bd9576_uvd_handler(int irq, struct regulator_irq_data *rid, + unsigned long *dev_mask) +{ + int val, ret, i; + struct bd957x_data *d = (struct bd957x_data *)rid->data; + + ret = regmap_read(d->regmap, BD957X_REG_INT_UVD_STAT, &val); + if (ret) + return REGULATOR_FAILED_RETRY; + + *dev_mask = 0; + + rid->opaque = val & UVD_IRQ_VALID_MASK; + + /* + * Go through the set status bits and report either error or warning + * to the notifier depending on what was flagged in DT + */ + *dev_mask = val & BD9576_xVD_IRQ_MASK_VOUT1TO4; + /* There is 1 bit gap in register after Vout1 .. Vout4 statuses */ + *dev_mask |= ((val & BD9576_xVD_IRQ_MASK_VOUTL1) >> 1); + /* + * We (ab)use the uvd for OCW notification. DT parsing should + * have added correct OCW flag to uvd_notif and uvd_err for S1 + */ + *dev_mask |= ((val & BD9576_UVD_IRQ_MASK_VOUTS1_OCW) >> 1); + + for_each_set_bit(i, dev_mask, 6) { + struct bd957x_regulator_data *rdata; + struct regulator_err_state *stat; + + rdata = &d->regulator_data[i]; + stat = &rid->states[i]; + + stat->notifs = rdata->uvd_notif; + stat->errors = rdata->uvd_err; + } + + ret = regmap_write(d->regmap, BD957X_REG_INT_UVD_STAT, + UVD_IRQ_VALID_MASK & val); + + return 0; +} + +static int bd9576_ovd_handler(int irq, struct regulator_irq_data *rid, + unsigned long *dev_mask) +{ + int val, ret, i; + struct bd957x_data *d = (struct bd957x_data *)rid->data; + + ret = regmap_read(d->regmap, BD957X_REG_INT_OVD_STAT, &val); + if (ret) + return REGULATOR_FAILED_RETRY; + + rid->opaque = val & OVD_IRQ_VALID_MASK; + *dev_mask = 0; + + if (!(val & OVD_IRQ_VALID_MASK)) + return 0; + + *dev_mask = val & BD9576_xVD_IRQ_MASK_VOUT1TO4; + /* There is 1 bit gap in register after Vout1 .. Vout4 statuses */ + *dev_mask |= ((val & BD9576_xVD_IRQ_MASK_VOUTL1) >> 1); + + for_each_set_bit(i, dev_mask, 5) { + struct bd957x_regulator_data *rdata; + struct regulator_err_state *stat; + + rdata = &d->regulator_data[i]; + stat = &rid->states[i]; + + stat->notifs = rdata->ovd_notif; + stat->errors = rdata->ovd_err; + } + + /* Clear the sub-IRQ status */ + regmap_write(d->regmap, BD957X_REG_INT_OVD_STAT, + OVD_IRQ_VALID_MASK & val); + + return 0; +} + +#define BD9576_DEV_MASK_ALL_REGULATORS 0x3F + +static int bd9576_thermal_handler(int irq, struct regulator_irq_data *rid, + unsigned long *dev_mask) +{ + int val, ret, i; + struct bd957x_data *d = (struct bd957x_data *)rid->data; + + ret = regmap_read(d->regmap, BD957X_REG_INT_THERM_STAT, &val); + if (ret) + return REGULATOR_FAILED_RETRY; + + if (!(val & BD9576_THERM_IRQ_MASK_TW)) { + *dev_mask = 0; + return 0; + } + + *dev_mask = BD9576_DEV_MASK_ALL_REGULATORS; + + for (i = 0; i < BD9576_NUM_REGULATORS; i++) { + struct bd957x_regulator_data *rdata; + struct regulator_err_state *stat; + + rdata = &d->regulator_data[i]; + stat = &rid->states[i]; + + stat->notifs = rdata->temp_notif; + stat->errors = rdata->temp_err; + } + + /* Clear the sub-IRQ status */ + regmap_write(d->regmap, BD957X_REG_INT_THERM_STAT, + BD9576_THERM_IRQ_MASK_TW); + + return 0; +} + static int bd957x_probe(struct platform_device *pdev) { struct regmap *regmap; struct regulator_config config = { 0 }; - int i, err; - bool vout_mode, ddr_sel; - const struct bd957x_regulator_data *reg_data = &bd9576_regulators[0]; - unsigned int num_reg_data = ARRAY_SIZE(bd9576_regulators); + int i, err = 0; + bool vout_mode, ddr_sel, may_have_irqs; + struct bd957x_data *ic_data; + unsigned int num_reg_data; + /* All regulators are related to UVD and thermal IRQs... */ + struct regulator_dev *rdevs[BD9576_NUM_REGULATORS]; + /* ...But VoutS1 is not flagged by OVD IRQ */ + struct regulator_dev *ovd_devs[BD9576_NUM_OVD_REGULATORS]; + static const struct regulator_irq_desc bd9576_notif_uvd = { + .name = "bd9576-uvd", + .irq_off_ms = 1000, + .map_event = bd9576_uvd_handler, + .renable = bd9576_uvd_renable, + .data = &bd957x_regulators, + }; + static const struct regulator_irq_desc bd9576_notif_ovd = { + .name = "bd9576-ovd", + .irq_off_ms = 1000, + .map_event = bd9576_ovd_handler, + .renable = bd9576_ovd_renable, + .data = &bd957x_regulators, + }; + static const struct regulator_irq_desc bd9576_notif_temp = { + .name = "bd9576-temp", + .irq_off_ms = 1000, + .map_event = bd9576_thermal_handler, + .renable = bd9576_temp_renable, + .data = &bd957x_regulators, + }; enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data; + num_reg_data = ARRAY_SIZE(bd957x_regulators.regulator_data); + + ic_data = &bd957x_regulators; + regmap = dev_get_regmap(pdev->dev.parent, NULL); if (!regmap) { dev_err(&pdev->dev, "No regmap\n"); return -EINVAL; } + + ic_data->regmap = regmap; vout_mode = of_property_read_bool(pdev->dev.parent->of_node, "rohm,vout1-en-low"); if (vout_mode) { @@ -263,15 +979,17 @@ static int bd957x_probe(struct platform_device *pdev) * bytes and use bd9576_regulators directly for non-constant configs * like DDR voltage selection. */ + platform_set_drvdata(pdev, ic_data); ddr_sel = of_property_read_bool(pdev->dev.parent->of_node, "rohm,ddr-sel-low"); if (ddr_sel) - bd9576_regulators[2].desc.fixed_uV = 1350000; + ic_data->regulator_data[2].desc.fixed_uV = 1350000; else - bd9576_regulators[2].desc.fixed_uV = 1500000; + ic_data->regulator_data[2].desc.fixed_uV = 1500000; switch (chip) { case ROHM_CHIP_TYPE_BD9576: + may_have_irqs = true; dev_dbg(&pdev->dev, "Found BD9576MUF\n"); break; case ROHM_CHIP_TYPE_BD9573: @@ -280,37 +998,121 @@ static int bd957x_probe(struct platform_device *pdev) default: dev_err(&pdev->dev, "Unsupported chip type\n"); err = -EINVAL; - goto err; + goto err_out; + } + + for (i = 0; i < num_reg_data; i++) { + struct regulator_desc *d; + + d = &ic_data->regulator_data[i].desc; + + + if (may_have_irqs) { + if (d->id >= ARRAY_SIZE(bd9576_ops_arr)) + return -EINVAL; + + d->ops = bd9576_ops_arr[d->id]; + } else { + if (d->id >= ARRAY_SIZE(bd9573_ops_arr)) + return -EINVAL; + + d->ops = bd9573_ops_arr[d->id]; + } } config.dev = pdev->dev.parent; config.regmap = regmap; + config.driver_data = ic_data; for (i = 0; i < num_reg_data; i++) { - const struct regulator_desc *desc; - struct regulator_dev *rdev; - const struct bd957x_regulator_data *r; + struct bd957x_regulator_data *r = &ic_data->regulator_data[i]; + const struct regulator_desc *desc = &r->desc; - r = ®_data[i]; - desc = &r->desc; - - rdev = devm_regulator_register(&pdev->dev, desc, &config); - if (IS_ERR(rdev)) { + r->rdev = devm_regulator_register(&pdev->dev, desc, + &config); + if (IS_ERR(r->rdev)) { dev_err(&pdev->dev, "failed to register %s regulator\n", desc->name); - err = PTR_ERR(rdev); - goto err; + err = PTR_ERR(r->rdev); + goto err_out; } /* * Clear the VOUT1 GPIO setting - rest of the regulators do not * support GPIO control */ config.ena_gpiod = NULL; + + if (!may_have_irqs) + continue; + + rdevs[i] = r->rdev; + if (i < BD957X_VOUTS1) + ovd_devs[i] = r->rdev; } + if (may_have_irqs) { + void *ret; + /* + * We can add both the possible error and warning flags here + * because the core uses these only for status clearing and + * if we use warnings - errors are always clear and the other + * way around. We can also add CURRENT flag for all regulators + * because it is never set if it is not supported. Same applies + * to setting UVD for VoutS1 - it is not accidentally cleared + * as it is never set. + */ + int uvd_errs = REGULATOR_ERROR_UNDER_VOLTAGE | + REGULATOR_ERROR_UNDER_VOLTAGE_WARN | + REGULATOR_ERROR_OVER_CURRENT | + REGULATOR_ERROR_OVER_CURRENT_WARN; + int ovd_errs = REGULATOR_ERROR_OVER_VOLTAGE_WARN | + REGULATOR_ERROR_REGULATION_OUT; + int temp_errs = REGULATOR_ERROR_OVER_TEMP | + REGULATOR_ERROR_OVER_TEMP_WARN; + int irq; + + irq = platform_get_irq_byname(pdev, "bd9576-uvd"); + + /* Register notifiers - can fail if IRQ is not given */ + ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_uvd, + irq, 0, uvd_errs, NULL, + &rdevs[0], + BD9576_NUM_REGULATORS); + if (IS_ERR(ret)) { + if (PTR_ERR(ret) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, "UVD disabled %pe\n", ret); + } + + irq = platform_get_irq_byname(pdev, "bd9576-ovd"); + + ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_ovd, + irq, 0, ovd_errs, NULL, + &ovd_devs[0], + BD9576_NUM_OVD_REGULATORS); + if (IS_ERR(ret)) { + if (PTR_ERR(ret) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_warn(&pdev->dev, "OVD disabled %pe\n", ret); + } + irq = platform_get_irq_byname(pdev, "bd9576-temp"); + + ret = devm_regulator_irq_helper(&pdev->dev, &bd9576_notif_temp, + irq, 0, temp_errs, NULL, + &rdevs[0], + BD9576_NUM_REGULATORS); + if (IS_ERR(ret)) { + if (PTR_ERR(ret) == -EPROBE_DEFER) + return -EPROBE_DEFER; -err: + dev_warn(&pdev->dev, "Thermal warning disabled %pe\n", + ret); + } + } +err_out: return err; } From patchwork Wed Apr 14 06:00:13 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 421166 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id A62A9C43461 for ; Wed, 14 Apr 2021 06:00:23 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 851716113D for ; Wed, 14 Apr 2021 06:00:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1349011AbhDNGAn (ORCPT ); Wed, 14 Apr 2021 02:00:43 -0400 Received: from mail-lf1-f42.google.com ([209.85.167.42]:38733 "EHLO mail-lf1-f42.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1345214AbhDNGAm (ORCPT ); Wed, 14 Apr 2021 02:00:42 -0400 Received: by mail-lf1-f42.google.com with SMTP id j18so31240981lfg.5; Tue, 13 Apr 2021 23:00:20 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=f4Q2DJD3DV7OkSynlanBwzkwssjVc6YxaICi84VA+UM=; b=GzXOtX86BXEK5eU33ZzhWkwTVyiyu/enlgxl/SrAjfoZHK9ZP46dMovN2X0plumsln 0zvT9TmBmMv5ynh6lctYA/MMBmJ2F1b6hsHNNm102j+BLH039w2BrTntcY3hUOZCtFpD srDlrmiMqM+x+GlbsLRpct8w9k7JV3opj9PCEwGc3JiH4mKyo3CDgbpZoZONA73wjJjy gDhgWXfJXmvEKnaPNj+GcQVpw6KJhfuNhZnplQeieTUHYy+e/RjJtVGCj3YtWSqpnRBK m+vC2V8CUwPBslDHGjWVB0V1wLCm6+iH7Zb9uXuZX81mLnm5AxgAgx+O6wbZBmsG6BZB 7nZQ== X-Gm-Message-State: AOAM531YTaVw7UueU6BUfUyio4JouUBXikoT1+nxMjt4OS07fq8QpEom k9v7KbYgoW34JZx7363VK7c= X-Google-Smtp-Source: ABdhPJxKujG2wBrfUHPrlF/DdKRjT4FEXoJGh7s/PjOzpD3Sui6yZtGoMKr3dOoVNeNzWZ9WEYzYdg== X-Received: by 2002:a19:6906:: with SMTP id e6mr18423553lfc.385.1618380020330; Tue, 13 Apr 2021 23:00:20 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyydy-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::6]) by smtp.gmail.com with ESMTPSA id k9sm2285172lfg.64.2021.04.13.23.00.19 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 13 Apr 2021 23:00:19 -0700 (PDT) Date: Wed, 14 Apr 2021 09:00:13 +0300 From: Matti Vaittinen To: Matti Vaittinen , Matti Vaittinen Cc: Mark Brown , Kees Cook , Andy Shevchenko , Zhang Rui , Guenter Roeck , "agross@kernel.org" , "devicetree@vger.kernel.org" , linux-power , "linux-kernel@vger.kernel.org" , "linux-renesas-soc@vger.kernel.org" , "linux-arm-msm@vger.kernel.org" , "bjorn.andersson@linaro.org" , "lgirdwood@gmail.com" , "robh+dt@kernel.org" Subject: [PATCH v7 9/9] MAINTAINERS: Add reviewer for regulator irq_helpers Message-ID: <5a544430d447fb9a261eee8c5856a586dcab55f1.1618377272.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a reviewer entry for the regulator irq_helpers. Signed-off-by: Matti Vaittinen --- Changelog: v6: - New patch --- MAINTAINERS | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 7fdc513392f4..c917d85feccd 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19228,6 +19228,10 @@ F: include/dt-bindings/regulator/ F: include/linux/regulator/ K: regulator_get_optional +VOLTAGE AND CURRENT REGULATOR IRQ HELPERS +R: Matti Vaittinen +F: drivers/regulator/irq_helpers.c + VRF M: David Ahern L: netdev@vger.kernel.org