From patchwork Mon Mar 29 12:54:33 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 410937 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id BDAAEC433DB for ; Mon, 29 Mar 2021 12:55:15 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 9298E61874 for ; Mon, 29 Mar 2021 12:55:15 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231721AbhC2Myn (ORCPT ); Mon, 29 Mar 2021 08:54:43 -0400 Received: from mail-lj1-f177.google.com ([209.85.208.177]:35739 "EHLO mail-lj1-f177.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229873AbhC2Myl (ORCPT ); Mon, 29 Mar 2021 08:54:41 -0400 Received: by mail-lj1-f177.google.com with SMTP id a1so15815357ljp.2; Mon, 29 Mar 2021 05:54:40 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=oto02MzzMQzw9+yHiY3kBwvwdj4cI1pLaT3bpKO7sBo=; b=YCiB0+MLhm+ITb/RdXJAJ/z2Ar07yXMRt9OmYjsVc5Z03KLLHG4TShmdJ5xzY8D9OG SyxaprtJ8+a/FTKtqdbs2OQ5yQoUcS2pRtMqel+rGjq7lq1axF1yQrmHs64MttZl43xA Rb5HdJjBm4/6HcaA//DT2CpiojgPvzojkDQ6Hm9PyfqQwo2CZTKAtGxjYcL3jTzxszmR VZGkpxUUOMgWxHMCYExAovBxQMDJlDVDssNhNPUOqvYk1eilNSt7jWpwM1VL6NmZ9gcY 94CAEL8rTYHS2AUZ/5fduFNKZfNolmkFPbisa0aKF9EslSSqGC6YXWTTHeIVtwY+Jlfw UWPA== X-Gm-Message-State: AOAM532tjNYp568e3tNxHsDb88N/QX6ukAfdoSkyi8vrddLwkyjKxc+q Djb+2BWbQ0yq7CGa0U2RVzQ= X-Google-Smtp-Source: ABdhPJzrhKYmyv/DYZrOlDQfGiUtuvV4bVoqnKt2sacyKDLWUBnw6KiSZQ8ZZzOclYx2Pq7fuwZ8ew== X-Received: by 2002:a2e:9a86:: with SMTP id p6mr18067146lji.359.1617022479796; Mon, 29 Mar 2021 05:54:39 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyyby-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::2]) by smtp.gmail.com with ESMTPSA id p5sm1825616lfe.154.2021.03.29.05.54.38 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Mar 2021 05:54:39 -0700 (PDT) Date: Mon, 29 Mar 2021 15:54:33 +0300 From: Matti Vaittinen To: Matti Vaittinen Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com Subject: [PATCH v5 05/19] dt_bindings: mfd: Add ROHM BD71815 PMIC Message-ID: References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Document DT bindings for ROHM BD71815. BD71815 is a single-chip power management IC mainly for battery-powered portable devices. The IC integrates 5 bucks, 7 LDOs, a boost driver for LED, a battery charger with a Coulomb counter, a real-time clock, a 32kHz clock and two general-purpose outputs although only one is documented by the data-sheet. Signed-off-by: Matti Vaittinen Reviewed-by: Rob Herring --- No changes since v3 .../bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++++++++++++++ 1 file changed, 201 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml new file mode 100644 index 000000000000..fe265bcab50d --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml @@ -0,0 +1,201 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BD71815 Power Management Integrated Circuit bindings + +maintainers: + - Matti Vaittinen + +description: | + BD71815AGW is a single-chip power management ICs for battery-powered + portable devices. It integrates 5 buck converters, 8 LDOs, a boost driver + for LED and a 500 mA single-cell linear charger. Also included is a Coulomb + counter, a real-time clock (RTC), and a 32.768 kHz clock gate and two GPOs. + +properties: + compatible: + const: rohm,bd71815 + + reg: + description: + I2C slave address. + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is the pin number and the second cell is used to specify + flags. See ../gpio/gpio.txt for more information. + + clocks: + maxItems: 1 + + "#clock-cells": + const: 0 + + clock-output-names: + const: bd71815-32k-out + + rohm,clkout-open-drain: + description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". + $ref: "/schemas/types.yaml#/definitions/uint32" + minimum: 0 + maximum: 1 + + rohm,charger-sense-resistor-ohms: + minimum: 10000000 + maximum: 50000000 + description: | + BD71827 and BD71828 have SAR ADC for measuring charging currents. + External sense resistor (RSENSE in data sheet) should be used. If + something other but 30MOhm resistor is used the resistance value + should be given here in Ohms. + default: 30000000 + + regulators: + $ref: ../regulator/rohm,bd71815-regulator.yaml + description: + List of child nodes that specify the regulators. + + gpio-reserved-ranges: + description: | + Usage of BD71828 GPIO pins can be changed via OTP. This property can be + used to mark the pins which should not be configured for GPIO. Please see + the ../gpio/gpio.txt for more information. + + rohm,enable-hidden-gpo: + description: | + The BD71815 has undocumented GPO at pin E5. Pin is marked as GND at the + data-sheet as it's location in the middle of GND pins makes it hard to + use on PCB. If your board has managed to use this pin you can enable the + second GPO by defining this property. Dont enable this if you are unsure + about how the E5 pin is connected on your board. + type: boolean + +required: + - compatible + - reg + - interrupts + - clocks + - "#clock-cells" + - regulators + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +examples: + - | + #include + #include + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic: pmic@4b { + compatible = "rohm,bd71815"; + reg = <0x4b>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + clocks = <&osc 0>; + #clock-cells = <0>; + clock-output-names = "bd71815-32k-out"; + + gpio-controller; + #gpio-cells = <2>; + + rohm,charger-sense-resistor-ohms = <10000000>; + + regulators { + buck1: buck1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck2: buck2 { + regulator-name = "buck2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + regulator-ramp-delay = <1250>; + rohm,dvs-run-voltage = <1150000>; + rohm,dvs-suspend-voltage = <950000>; + }; + buck3: buck3 { + regulator-name = "buck3"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + buck4: buck4 { + regulator-name = "buck4"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1850000>; + regulator-always-on; + }; + buck5: buck5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo1: ldo1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo2: ldo2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo3: ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo4: ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo5: ldo5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + ldo6: ldodvref { + regulator-name = "ldodvref"; + regulator-always-on; + }; + ldo7: ldolpsr { + regulator-name = "ldolpsr"; + regulator-always-on; + }; + + boost: wled { + regulator-name = "wled"; + regulator-min-microamp = <10>; + regulator-max-microamp = <25000>; + }; + }; + }; + }; From patchwork Mon Mar 29 12:55:36 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 410936 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.7 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,UPPERCASE_50_75 autolearn=unavailable autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id D60E7C433E0 for ; Mon, 29 Mar 2021 12:56:19 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A2DD661934 for ; Mon, 29 Mar 2021 12:56:19 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231656AbhC2Mzs (ORCPT ); Mon, 29 Mar 2021 08:55:48 -0400 Received: from mail-lj1-f172.google.com ([209.85.208.172]:42760 "EHLO mail-lj1-f172.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231753AbhC2Mzp (ORCPT ); Mon, 29 Mar 2021 08:55:45 -0400 Received: by mail-lj1-f172.google.com with SMTP id 184so15767285ljf.9; Mon, 29 Mar 2021 05:55:43 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=HOepdPVkKJ14VZ0QMNDvwHNjThopHyZI8tMLl++WBc4=; b=tudJ12+xbBy1IBpVmnpWG2EhP2dL86wcEq4ETzrp+Njy9upuAgV/IvSX0e1Ol6He11 t+cT39gXgyYfpb4kUw7+IQ52uSxG6imtQEbmk8l7P9MVciVdDO12JPgNrcVfwtAovRD8 wzodOnrDLb+HyYpxYVTpWEzhsTpe5M0lUe1x6P29rWzdYnqrWuZ2Bx70ww3q1s3uHT6r FokCO4H89gA8OMiteVqTLpjYARqGgFr0iI7hbjpa/WSi14zOaESTeeszj+UX84FAB4Lp kk44YMujS8Lj4i5Se6PG12+f/8IktfynhULnnMQ5K+b1EGVh2MoTSX24CqP7Bq48YQJZ a+Fw== X-Gm-Message-State: AOAM533xQkkdsVLzeq3X5o0Ym7fs/r0CF5JWMJy5TE6u8hAxO/imHIOx VPS/TjYy5OASbZ4cV3ABVWU= X-Google-Smtp-Source: ABdhPJxBf1hlOQTzsIt068wxzyUL3RPxmpTg9CWM1Xt8M4ch505yE6uEDIIBkwpU8EggZrN4Iav9qg== X-Received: by 2002:a2e:95d2:: with SMTP id y18mr18735423ljh.353.1617022542842; Mon, 29 Mar 2021 05:55:42 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyyby-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::2]) by smtp.gmail.com with ESMTPSA id t26sm2424171ljg.12.2021.03.29.05.55.41 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Mar 2021 05:55:42 -0700 (PDT) Date: Mon, 29 Mar 2021 15:55:36 +0300 From: Matti Vaittinen To: Matti Vaittinen Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , Michael Turquette , Stephen Boyd , Linus Walleij , Bartosz Golaszewski , Alessandro Zummo , Alexandre Belloni , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org, linux-rtc@vger.kernel.org Subject: [PATCH v5 08/19] mfd: Support for ROHM BD71815 PMIC core Message-ID: References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Add core support for ROHM BD71815 Power Management IC. The IC integrates regulators, a battery charger with a coulomb counter, a real-time clock (RTC), clock gate and general-purpose outputs (GPO). Signed-off-by: Matti Vaittinen Acked-for-MFD-by: Lee Jones --- No changes since v4 drivers/mfd/Kconfig | 15 +- drivers/mfd/rohm-bd71828.c | 486 +++++++++++++++++++------- include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++++++++++++++++++++ include/linux/mfd/rohm-bd71828.h | 3 + 4 files changed, 933 insertions(+), 133 deletions(-) create mode 100644 include/linux/mfd/rohm-bd71815.h diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index b74efa469e90..60d9ae559f0a 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1975,19 +1975,20 @@ config MFD_ROHM_BD70528 charger. config MFD_ROHM_BD71828 - tristate "ROHM BD71828 Power Management IC" + tristate "ROHM BD71828 and BD71815 Power Management IC" depends on I2C=y depends on OF select REGMAP_I2C select REGMAP_IRQ select MFD_CORE help - Select this option to get support for the ROHM BD71828 Power - Management IC. BD71828GW is a single-chip power management IC for - battery-powered portable devices. The IC integrates 7 buck - converters, 7 LDOs, and a 1500 mA single-cell linear charger. - Also included is a Coulomb counter, a real-time clock (RTC), and - a 32.768 kHz clock gate. + Select this option to get support for the ROHM BD71828 and BD71815 + Power Management ICs. BD71828GW and BD71815AGW are single-chip power + management ICs mainly for battery-powered portable devices. + The BD71828 integrates 7 buck converters and 7 LDOs. The BD71815 + has 5 bucks, 7 LDOs, and a boost for driving LEDs. Both ICs provide + also a single-cell linear charger, a Coulomb counter, a real-time + clock (RTC), GPIOs and a 32.768 kHz clock gate. config MFD_STM32_LPTIMER tristate "Support for STM32 Low-Power Timer" diff --git a/drivers/mfd/rohm-bd71828.c b/drivers/mfd/rohm-bd71828.c index 210261d026f2..714d9fcbf07b 100644 --- a/drivers/mfd/rohm-bd71828.c +++ b/drivers/mfd/rohm-bd71828.c @@ -2,7 +2,7 @@ // // Copyright (C) 2019 ROHM Semiconductors // -// ROHM BD71828 PMIC driver +// ROHM BD71828/BD71815 PMIC driver #include #include @@ -11,7 +11,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -29,12 +31,84 @@ static struct gpio_keys_platform_data bd71828_powerkey_data = { .name = "bd71828-pwrkey", }; -static const struct resource rtc_irqs[] = { +static const struct resource bd71815_rtc_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC0, "bd71815-rtc-alm-0"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC1, "bd71815-rtc-alm-1"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_RTC2, "bd71815-rtc-alm-2"), +}; + +static const struct resource bd71828_rtc_irqs[] = { DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC0, "bd71828-rtc-alm-0"), DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC1, "bd71828-rtc-alm-1"), DEFINE_RES_IRQ_NAMED(BD71828_INT_RTC2, "bd71828-rtc-alm-2"), }; +static struct resource bd71815_power_irqs[] = { + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_RMV, "bd71815-dcin-rmv"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CLPS_OUT, "bd71815-clps-out"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CLPS_IN, "bd71815-clps-in"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_OVP_RES, "bd71815-dcin-ovp-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_OVP_DET, "bd71815-dcin-ovp-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_MON_RES, "bd71815-dcin-mon-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_DCIN_MON_DET, "bd71815-dcin-mon-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_UV_RES, "bd71815-vsys-uv-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_UV_DET, "bd71815-vsys-uv-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_LOW_RES, "bd71815-vsys-low-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_LOW_DET, "bd71815-vsys-low-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_MON_RES, "bd71815-vsys-mon-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_VSYS_MON_RES, "bd71815-vsys-mon-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_WDG_TEMP, "bd71815-chg-wdg-temp"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_WDG_TIME, "bd71815-chg-wdg"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RECHARGE_RES, "bd71815-rechg-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RECHARGE_DET, "bd71815-rechg-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_RANGED_TEMP_TRANSITION, "bd71815-ranged-temp-transit"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_CHG_STATE_TRANSITION, "bd71815-chg-state-change"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_TEMP_NORMAL, "bd71815-bat-temp-normal"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_TEMP_ERANGE, "bd71815-bat-temp-erange"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_REMOVED, "bd71815-bat-rmv"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_DETECTED, "bd71815-bat-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_THERM_REMOVED, "bd71815-therm-rmv"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_THERM_DETECTED, "bd71815-therm-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_DEAD, "bd71815-bat-dead"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_SHORTC_RES, "bd71815-bat-short-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_SHORTC_DET, "bd71815-bat-short-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_LOW_VOLT_RES, "bd71815-bat-low-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_LOW_VOLT_DET, "bd71815-bat-low-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_VOLT_RES, "bd71815-bat-over-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_VOLT_DET, "bd71815-bat-over-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_MON_RES, "bd71815-bat-mon-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_MON_DET, "bd71815-bat-mon-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON1, "bd71815-bat-cc-mon1"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON2, "bd71815-bat-cc-mon2"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_CC_MON3, "bd71815-bat-cc-mon3"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_1_RES, "bd71815-bat-oc1-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_1_DET, "bd71815-bat-oc1-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_2_RES, "bd71815-bat-oc2-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_2_DET, "bd71815-bat-oc2-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_3_RES, "bd71815-bat-oc3-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_BAT_OVER_CURR_3_DET, "bd71815-bat-oc3-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_LOW_RES, "bd71815-bat-low-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_LOW_DET, "bd71815-bat-low-det"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_HI_RES, "bd71815-bat-hi-res"), + DEFINE_RES_IRQ_NAMED(BD71815_INT_TEMP_BAT_HI_DET, "bd71815-bat-hi-det"), +}; + +static struct mfd_cell bd71815_mfd_cells[] = { + { .name = "bd71815-pmic", }, + { .name = "bd71815-clk", }, + { .name = "bd71815-gpo", }, + { + .name = "bd71815-power", + .num_resources = ARRAY_SIZE(bd71815_power_irqs), + .resources = &bd71815_power_irqs[0], + }, + { + .name = "bd71815-rtc", + .num_resources = ARRAY_SIZE(bd71815_rtc_irqs), + .resources = &bd71815_rtc_irqs[0], + }, +}; + static struct mfd_cell bd71828_mfd_cells[] = { { .name = "bd71828-pmic", }, { .name = "bd71828-gpio", }, @@ -47,8 +121,8 @@ static struct mfd_cell bd71828_mfd_cells[] = { { .name = "bd71827-power", }, { .name = "bd71828-rtc", - .resources = rtc_irqs, - .num_resources = ARRAY_SIZE(rtc_irqs), + .resources = bd71828_rtc_irqs, + .num_resources = ARRAY_SIZE(bd71828_rtc_irqs), }, { .name = "gpio-keys", .platform_data = &bd71828_powerkey_data, @@ -56,7 +130,35 @@ static struct mfd_cell bd71828_mfd_cells[] = { }, }; -static const struct regmap_range volatile_ranges[] = { +static const struct regmap_range bd71815_volatile_ranges[] = { + { + .range_min = BD71815_REG_SEC, + .range_max = BD71815_REG_YEAR, + }, { + .range_min = BD71815_REG_CONF, + .range_max = BD71815_REG_BAT_TEMP, + }, { + .range_min = BD71815_REG_VM_IBAT_U, + .range_max = BD71815_REG_CC_CTRL, + }, { + .range_min = BD71815_REG_CC_STAT, + .range_max = BD71815_REG_CC_CURCD_L, + }, { + .range_min = BD71815_REG_VM_BTMP_MON, + .range_max = BD71815_REG_VM_BTMP_MON, + }, { + .range_min = BD71815_REG_INT_STAT, + .range_max = BD71815_REG_INT_UPDATE, + }, { + .range_min = BD71815_REG_VM_VSYS_U, + .range_max = BD71815_REG_REX_CTRL_1, + }, { + .range_min = BD71815_REG_FULL_CCNTD_3, + .range_max = BD71815_REG_CCNTD_CHG_2, + }, +}; + +static const struct regmap_range bd71828_volatile_ranges[] = { { .range_min = BD71828_REG_PS_CTRL_1, .range_max = BD71828_REG_PS_CTRL_1, @@ -80,15 +182,28 @@ static const struct regmap_range volatile_ranges[] = { }, }; -static const struct regmap_access_table volatile_regs = { - .yes_ranges = &volatile_ranges[0], - .n_yes_ranges = ARRAY_SIZE(volatile_ranges), +static const struct regmap_access_table bd71815_volatile_regs = { + .yes_ranges = &bd71815_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bd71815_volatile_ranges), +}; + +static const struct regmap_access_table bd71828_volatile_regs = { + .yes_ranges = &bd71828_volatile_ranges[0], + .n_yes_ranges = ARRAY_SIZE(bd71828_volatile_ranges), +}; + +static const struct regmap_config bd71815_regmap = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &bd71815_volatile_regs, + .max_register = BD71815_MAX_REGISTER - 1, + .cache_type = REGCACHE_RBTREE, }; -static struct regmap_config bd71828_regmap = { +static const struct regmap_config bd71828_regmap = { .reg_bits = 8, .val_bits = 8, - .volatile_table = &volatile_regs, + .volatile_table = &bd71828_volatile_regs, .max_register = BD71828_MAX_REGISTER, .cache_type = REGCACHE_RBTREE, }; @@ -96,7 +211,7 @@ static struct regmap_config bd71828_regmap = { /* * Mapping of main IRQ register bits to sub-IRQ register offsets so that we can * access corect sub-IRQ registers based on bits that are set in main IRQ - * register. + * register. BD71815 and BD71828 have same sub-register-block offests. */ static unsigned int bit0_offsets[] = {11}; /* RTC IRQ */ @@ -108,7 +223,7 @@ static unsigned int bit5_offsets[] = {3}; /* VSYS IRQ */ static unsigned int bit6_offsets[] = {1, 2}; /* DCIN IRQ */ static unsigned int bit7_offsets[] = {0}; /* BUCK IRQ */ -static struct regmap_irq_sub_irq_map bd71828_sub_irq_offsets[] = { +static struct regmap_irq_sub_irq_map bd718xx_sub_irq_offsets[] = { REGMAP_IRQ_MAIN_REG_OFFSET(bit0_offsets), REGMAP_IRQ_MAIN_REG_OFFSET(bit1_offsets), REGMAP_IRQ_MAIN_REG_OFFSET(bit2_offsets), @@ -119,6 +234,88 @@ static struct regmap_irq_sub_irq_map bd71828_sub_irq_offsets[] = { REGMAP_IRQ_MAIN_REG_OFFSET(bit7_offsets), }; +static const struct regmap_irq bd71815_irqs[] = { + REGMAP_IRQ_REG(BD71815_INT_BUCK1_OCP, 0, BD71815_INT_BUCK1_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK2_OCP, 0, BD71815_INT_BUCK2_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK3_OCP, 0, BD71815_INT_BUCK3_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK4_OCP, 0, BD71815_INT_BUCK4_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_BUCK5_OCP, 0, BD71815_INT_BUCK5_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_LED_OVP, 0, BD71815_INT_LED_OVP_MASK), + REGMAP_IRQ_REG(BD71815_INT_LED_OCP, 0, BD71815_INT_LED_OCP_MASK), + REGMAP_IRQ_REG(BD71815_INT_LED_SCP, 0, BD71815_INT_LED_SCP_MASK), + /* DCIN1 interrupts */ + REGMAP_IRQ_REG(BD71815_INT_DCIN_RMV, 1, BD71815_INT_DCIN_RMV_MASK), + REGMAP_IRQ_REG(BD71815_INT_CLPS_OUT, 1, BD71815_INT_CLPS_OUT_MASK), + REGMAP_IRQ_REG(BD71815_INT_CLPS_IN, 1, BD71815_INT_CLPS_IN_MASK), + REGMAP_IRQ_REG(BD71815_INT_DCIN_OVP_RES, 1, BD71815_INT_DCIN_OVP_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_DCIN_OVP_DET, 1, BD71815_INT_DCIN_OVP_DET_MASK), + /* DCIN2 interrupts */ + REGMAP_IRQ_REG(BD71815_INT_DCIN_MON_RES, 2, BD71815_INT_DCIN_MON_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_DCIN_MON_DET, 2, BD71815_INT_DCIN_MON_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_WDOG, 2, BD71815_INT_WDOG_MASK), + /* Vsys */ + REGMAP_IRQ_REG(BD71815_INT_VSYS_UV_RES, 3, BD71815_INT_VSYS_UV_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_UV_DET, 3, BD71815_INT_VSYS_UV_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_LOW_RES, 3, BD71815_INT_VSYS_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_LOW_DET, 3, BD71815_INT_VSYS_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_MON_RES, 3, BD71815_INT_VSYS_MON_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_VSYS_MON_DET, 3, BD71815_INT_VSYS_MON_DET_MASK), + /* Charger */ + REGMAP_IRQ_REG(BD71815_INT_CHG_WDG_TEMP, 4, BD71815_INT_CHG_WDG_TEMP_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_WDG_TIME, 4, BD71815_INT_CHG_WDG_TIME_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_RECHARGE_RES, 4, BD71815_INT_CHG_RECHARGE_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_RECHARGE_DET, 4, BD71815_INT_CHG_RECHARGE_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_RANGED_TEMP_TRANSITION, 4, + BD71815_INT_CHG_RANGED_TEMP_TRANSITION_MASK), + REGMAP_IRQ_REG(BD71815_INT_CHG_STATE_TRANSITION, 4, BD71815_INT_CHG_STATE_TRANSITION_MASK), + /* Battery */ + REGMAP_IRQ_REG(BD71815_INT_BAT_TEMP_NORMAL, 5, BD71815_INT_BAT_TEMP_NORMAL_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_TEMP_ERANGE, 5, BD71815_INT_BAT_TEMP_ERANGE_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_REMOVED, 5, BD71815_INT_BAT_REMOVED_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_DETECTED, 5, BD71815_INT_BAT_DETECTED_MASK), + REGMAP_IRQ_REG(BD71815_INT_THERM_REMOVED, 5, BD71815_INT_THERM_REMOVED_MASK), + REGMAP_IRQ_REG(BD71815_INT_THERM_DETECTED, 5, BD71815_INT_THERM_DETECTED_MASK), + /* Battery Mon 1 */ + REGMAP_IRQ_REG(BD71815_INT_BAT_DEAD, 6, BD71815_INT_BAT_DEAD_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_SHORTC_RES, 6, BD71815_INT_BAT_SHORTC_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_SHORTC_DET, 6, BD71815_INT_BAT_SHORTC_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_LOW_VOLT_RES, 6, BD71815_INT_BAT_LOW_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_LOW_VOLT_DET, 6, BD71815_INT_BAT_LOW_VOLT_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_VOLT_RES, 6, BD71815_INT_BAT_OVER_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_VOLT_DET, 6, BD71815_INT_BAT_OVER_VOLT_DET_MASK), + /* Battery Mon 2 */ + REGMAP_IRQ_REG(BD71815_INT_BAT_MON_RES, 7, BD71815_INT_BAT_MON_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_MON_DET, 7, BD71815_INT_BAT_MON_DET_MASK), + /* Battery Mon 3 (Coulomb counter) */ + REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON1, 8, BD71815_INT_BAT_CC_MON1_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON2, 8, BD71815_INT_BAT_CC_MON2_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_CC_MON3, 8, BD71815_INT_BAT_CC_MON3_MASK), + /* Battery Mon 4 */ + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_1_RES, 9, BD71815_INT_BAT_OVER_CURR_1_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_1_DET, 9, BD71815_INT_BAT_OVER_CURR_1_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_2_RES, 9, BD71815_INT_BAT_OVER_CURR_2_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_2_DET, 9, BD71815_INT_BAT_OVER_CURR_2_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_3_RES, 9, BD71815_INT_BAT_OVER_CURR_3_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_BAT_OVER_CURR_3_DET, 9, BD71815_INT_BAT_OVER_CURR_3_DET_MASK), + /* Temperature */ + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_LOW_RES, 10, BD71815_INT_TEMP_BAT_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_LOW_DET, 10, BD71815_INT_TEMP_BAT_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_HI_RES, 10, BD71815_INT_TEMP_BAT_HI_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_BAT_HI_DET, 10, BD71815_INT_TEMP_BAT_HI_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_125_RES, 10, + BD71815_INT_TEMP_CHIP_OVER_125_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_125_DET, 10, + BD71815_INT_TEMP_CHIP_OVER_125_DET_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_VF_RES, 10, + BD71815_INT_TEMP_CHIP_OVER_VF_RES_MASK), + REGMAP_IRQ_REG(BD71815_INT_TEMP_CHIP_OVER_VF_DET, 10, + BD71815_INT_TEMP_CHIP_OVER_VF_DET_MASK), + /* RTC Alarm */ + REGMAP_IRQ_REG(BD71815_INT_RTC0, 11, BD71815_INT_RTC0_MASK), + REGMAP_IRQ_REG(BD71815_INT_RTC1, 11, BD71815_INT_RTC1_MASK), + REGMAP_IRQ_REG(BD71815_INT_RTC2, 11, BD71815_INT_RTC2_MASK), +}; + static struct regmap_irq bd71828_irqs[] = { REGMAP_IRQ_REG(BD71828_INT_BUCK1_OCP, 0, BD71828_INT_BUCK1_OCP_MASK), REGMAP_IRQ_REG(BD71828_INT_BUCK2_OCP, 0, BD71828_INT_BUCK2_OCP_MASK), @@ -134,10 +331,8 @@ static struct regmap_irq bd71828_irqs[] = { REGMAP_IRQ_REG(BD71828_INT_CLPS_OUT, 1, BD71828_INT_CLPS_OUT_MASK), REGMAP_IRQ_REG(BD71828_INT_CLPS_IN, 1, BD71828_INT_CLPS_IN_MASK), /* DCIN2 interrupts */ - REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_RES, 2, - BD71828_INT_DCIN_MON_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_DET, 2, - BD71828_INT_DCIN_MON_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_RES, 2, BD71828_INT_DCIN_MON_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_DCIN_MON_DET, 2, BD71828_INT_DCIN_MON_DET_MASK), REGMAP_IRQ_REG(BD71828_INT_LONGPUSH, 2, BD71828_INT_LONGPUSH_MASK), REGMAP_IRQ_REG(BD71828_INT_MIDPUSH, 2, BD71828_INT_MIDPUSH_MASK), REGMAP_IRQ_REG(BD71828_INT_SHORTPUSH, 2, BD71828_INT_SHORTPUSH_MASK), @@ -145,102 +340,59 @@ static struct regmap_irq bd71828_irqs[] = { REGMAP_IRQ_REG(BD71828_INT_WDOG, 2, BD71828_INT_WDOG_MASK), REGMAP_IRQ_REG(BD71828_INT_SWRESET, 2, BD71828_INT_SWRESET_MASK), /* Vsys */ - REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_RES, 3, - BD71828_INT_VSYS_UV_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_DET, 3, - BD71828_INT_VSYS_UV_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_RES, 3, - BD71828_INT_VSYS_LOW_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_DET, 3, - BD71828_INT_VSYS_LOW_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_IN, 3, - BD71828_INT_VSYS_HALL_IN_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_TOGGLE, 3, - BD71828_INT_VSYS_HALL_TOGGLE_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_RES, 3, - BD71828_INT_VSYS_MON_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_DET, 3, - BD71828_INT_VSYS_MON_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_RES, 3, BD71828_INT_VSYS_UV_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_UV_DET, 3, BD71828_INT_VSYS_UV_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_RES, 3, BD71828_INT_VSYS_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_LOW_DET, 3, BD71828_INT_VSYS_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_IN, 3, BD71828_INT_VSYS_HALL_IN_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_HALL_TOGGLE, 3, BD71828_INT_VSYS_HALL_TOGGLE_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_RES, 3, BD71828_INT_VSYS_MON_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_VSYS_MON_DET, 3, BD71828_INT_VSYS_MON_DET_MASK), /* Charger */ - REGMAP_IRQ_REG(BD71828_INT_CHG_DCIN_ILIM, 4, - BD71828_INT_CHG_DCIN_ILIM_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_TOPOFF_TO_DONE, 4, - BD71828_INT_CHG_TOPOFF_TO_DONE_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TEMP, 4, - BD71828_INT_CHG_WDG_TEMP_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TIME, 4, - BD71828_INT_CHG_WDG_TIME_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_RES, 4, - BD71828_INT_CHG_RECHARGE_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_DET, 4, - BD71828_INT_CHG_RECHARGE_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_DCIN_ILIM, 4, BD71828_INT_CHG_DCIN_ILIM_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_TOPOFF_TO_DONE, 4, BD71828_INT_CHG_TOPOFF_TO_DONE_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TEMP, 4, BD71828_INT_CHG_WDG_TEMP_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_WDG_TIME, 4, BD71828_INT_CHG_WDG_TIME_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_RES, 4, BD71828_INT_CHG_RECHARGE_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_RECHARGE_DET, 4, BD71828_INT_CHG_RECHARGE_DET_MASK), REGMAP_IRQ_REG(BD71828_INT_CHG_RANGED_TEMP_TRANSITION, 4, BD71828_INT_CHG_RANGED_TEMP_TRANSITION_MASK), - REGMAP_IRQ_REG(BD71828_INT_CHG_STATE_TRANSITION, 4, - BD71828_INT_CHG_STATE_TRANSITION_MASK), + REGMAP_IRQ_REG(BD71828_INT_CHG_STATE_TRANSITION, 4, BD71828_INT_CHG_STATE_TRANSITION_MASK), /* Battery */ - REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_NORMAL, 5, - BD71828_INT_BAT_TEMP_NORMAL_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_ERANGE, 5, - BD71828_INT_BAT_TEMP_ERANGE_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_WARN, 5, - BD71828_INT_BAT_TEMP_WARN_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_REMOVED, 5, - BD71828_INT_BAT_REMOVED_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_DETECTED, 5, - BD71828_INT_BAT_DETECTED_MASK), - REGMAP_IRQ_REG(BD71828_INT_THERM_REMOVED, 5, - BD71828_INT_THERM_REMOVED_MASK), - REGMAP_IRQ_REG(BD71828_INT_THERM_DETECTED, 5, - BD71828_INT_THERM_DETECTED_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_NORMAL, 5, BD71828_INT_BAT_TEMP_NORMAL_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_ERANGE, 5, BD71828_INT_BAT_TEMP_ERANGE_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_TEMP_WARN, 5, BD71828_INT_BAT_TEMP_WARN_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_REMOVED, 5, BD71828_INT_BAT_REMOVED_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_DETECTED, 5, BD71828_INT_BAT_DETECTED_MASK), + REGMAP_IRQ_REG(BD71828_INT_THERM_REMOVED, 5, BD71828_INT_THERM_REMOVED_MASK), + REGMAP_IRQ_REG(BD71828_INT_THERM_DETECTED, 5, BD71828_INT_THERM_DETECTED_MASK), /* Battery Mon 1 */ REGMAP_IRQ_REG(BD71828_INT_BAT_DEAD, 6, BD71828_INT_BAT_DEAD_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_RES, 6, - BD71828_INT_BAT_SHORTC_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_DET, 6, - BD71828_INT_BAT_SHORTC_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_RES, 6, - BD71828_INT_BAT_LOW_VOLT_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_DET, 6, - BD71828_INT_BAT_LOW_VOLT_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_RES, 6, - BD71828_INT_BAT_OVER_VOLT_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_DET, 6, - BD71828_INT_BAT_OVER_VOLT_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_RES, 6, BD71828_INT_BAT_SHORTC_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_SHORTC_DET, 6, BD71828_INT_BAT_SHORTC_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_RES, 6, BD71828_INT_BAT_LOW_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_LOW_VOLT_DET, 6, BD71828_INT_BAT_LOW_VOLT_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_RES, 6, BD71828_INT_BAT_OVER_VOLT_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_VOLT_DET, 6, BD71828_INT_BAT_OVER_VOLT_DET_MASK), /* Battery Mon 2 */ - REGMAP_IRQ_REG(BD71828_INT_BAT_MON_RES, 7, - BD71828_INT_BAT_MON_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_MON_DET, 7, - BD71828_INT_BAT_MON_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_MON_RES, 7, BD71828_INT_BAT_MON_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_MON_DET, 7, BD71828_INT_BAT_MON_DET_MASK), /* Battery Mon 3 (Coulomb counter) */ - REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON1, 8, - BD71828_INT_BAT_CC_MON1_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON2, 8, - BD71828_INT_BAT_CC_MON2_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON3, 8, - BD71828_INT_BAT_CC_MON3_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON1, 8, BD71828_INT_BAT_CC_MON1_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON2, 8, BD71828_INT_BAT_CC_MON2_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_CC_MON3, 8, BD71828_INT_BAT_CC_MON3_MASK), /* Battery Mon 4 */ - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_RES, 9, - BD71828_INT_BAT_OVER_CURR_1_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_DET, 9, - BD71828_INT_BAT_OVER_CURR_1_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_RES, 9, - BD71828_INT_BAT_OVER_CURR_2_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_DET, 9, - BD71828_INT_BAT_OVER_CURR_2_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_RES, 9, - BD71828_INT_BAT_OVER_CURR_3_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_DET, 9, - BD71828_INT_BAT_OVER_CURR_3_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_RES, 9, BD71828_INT_BAT_OVER_CURR_1_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_1_DET, 9, BD71828_INT_BAT_OVER_CURR_1_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_RES, 9, BD71828_INT_BAT_OVER_CURR_2_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_2_DET, 9, BD71828_INT_BAT_OVER_CURR_2_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_RES, 9, BD71828_INT_BAT_OVER_CURR_3_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_BAT_OVER_CURR_3_DET, 9, BD71828_INT_BAT_OVER_CURR_3_DET_MASK), /* Temperature */ - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_RES, 10, - BD71828_INT_TEMP_BAT_LOW_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_DET, 10, - BD71828_INT_TEMP_BAT_LOW_DET_MASK), - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_RES, 10, - BD71828_INT_TEMP_BAT_HI_RES_MASK), - REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_DET, 10, - BD71828_INT_TEMP_BAT_HI_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_RES, 10, BD71828_INT_TEMP_BAT_LOW_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_LOW_DET, 10, BD71828_INT_TEMP_BAT_LOW_DET_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_RES, 10, BD71828_INT_TEMP_BAT_HI_RES_MASK), + REGMAP_IRQ_REG(BD71828_INT_TEMP_BAT_HI_DET, 10, BD71828_INT_TEMP_BAT_HI_DET_MASK), REGMAP_IRQ_REG(BD71828_INT_TEMP_CHIP_OVER_125_RES, 10, BD71828_INT_TEMP_CHIP_OVER_125_RES_MASK), REGMAP_IRQ_REG(BD71828_INT_TEMP_CHIP_OVER_125_DET, 10, @@ -267,57 +419,133 @@ static struct regmap_irq_chip bd71828_irq_chip = { .init_ack_masked = true, .num_regs = 12, .num_main_regs = 1, - .sub_reg_offsets = &bd71828_sub_irq_offsets[0], + .sub_reg_offsets = &bd718xx_sub_irq_offsets[0], + .num_main_status_bits = 8, + .irq_reg_stride = 1, +}; + +static struct regmap_irq_chip bd71815_irq_chip = { + .name = "bd71815_irq", + .main_status = BD71815_REG_INT_STAT, + .irqs = &bd71815_irqs[0], + .num_irqs = ARRAY_SIZE(bd71815_irqs), + .status_base = BD71815_REG_INT_STAT_01, + .mask_base = BD71815_REG_INT_EN_01, + .ack_base = BD71815_REG_INT_STAT_01, + .mask_invert = true, + .init_ack_masked = true, + .num_regs = 12, + .num_main_regs = 1, + .sub_reg_offsets = &bd718xx_sub_irq_offsets[0], .num_main_status_bits = 8, .irq_reg_stride = 1, }; +static int set_clk_mode(struct device *dev, struct regmap *regmap, + int clkmode_reg) +{ + int ret; + unsigned int open_drain; + + ret = of_property_read_u32(dev->of_node, "rohm,clkout-open-drain", &open_drain); + if (ret) { + if (ret == -EINVAL) + return 0; + return ret; + } + if (open_drain > 1) { + dev_err(dev, "bad clk32kout mode configuration"); + return -EINVAL; + } + + if (open_drain) + return regmap_update_bits(regmap, clkmode_reg, OUT32K_MODE, + OUT32K_MODE_OPEN_DRAIN); + + return regmap_update_bits(regmap, clkmode_reg, OUT32K_MODE, + OUT32K_MODE_CMOS); +} + static int bd71828_i2c_probe(struct i2c_client *i2c) { - struct rohm_regmap_dev *chip; struct regmap_irq_chip_data *irq_data; int ret; + struct regmap *regmap; + const struct regmap_config *regmap_config; + struct regmap_irq_chip *irqchip; + unsigned int chip_type; + struct mfd_cell *mfd; + int cells; + int button_irq; + int clkmode_reg; if (!i2c->irq) { dev_err(&i2c->dev, "No IRQ configured\n"); return -EINVAL; } - chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL); - if (!chip) - return -ENOMEM; - - dev_set_drvdata(&i2c->dev, chip); + chip_type = (unsigned int)(uintptr_t) + of_device_get_match_data(&i2c->dev); + switch (chip_type) { + case ROHM_CHIP_TYPE_BD71828: + mfd = bd71828_mfd_cells; + cells = ARRAY_SIZE(bd71828_mfd_cells); + regmap_config = &bd71828_regmap; + irqchip = &bd71828_irq_chip; + clkmode_reg = BD71828_REG_OUT32K; + button_irq = BD71828_INT_SHORTPUSH; + break; + case ROHM_CHIP_TYPE_BD71815: + mfd = bd71815_mfd_cells; + cells = ARRAY_SIZE(bd71815_mfd_cells); + regmap_config = &bd71815_regmap; + irqchip = &bd71815_irq_chip; + clkmode_reg = BD71815_REG_OUT32K; + /* + * If BD71817 support is needed we should be able to handle it + * with proper DT configs + BD71815 drivers + power-button. + * BD71815 data-sheet does not list the power-button IRQ so we + * don't use it. + */ + button_irq = 0; + break; + default: + dev_err(&i2c->dev, "Unknown device type"); + return -EINVAL; + } - chip->regmap = devm_regmap_init_i2c(i2c, &bd71828_regmap); - if (IS_ERR(chip->regmap)) { + regmap = devm_regmap_init_i2c(i2c, regmap_config); + if (IS_ERR(regmap)) { dev_err(&i2c->dev, "Failed to initialize Regmap\n"); - return PTR_ERR(chip->regmap); + return PTR_ERR(regmap); } - ret = devm_regmap_add_irq_chip(&i2c->dev, chip->regmap, - i2c->irq, IRQF_ONESHOT, 0, - &bd71828_irq_chip, &irq_data); + ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, i2c->irq, + IRQF_ONESHOT, 0, irqchip, &irq_data); if (ret) { dev_err(&i2c->dev, "Failed to add IRQ chip\n"); return ret; } dev_dbg(&i2c->dev, "Registered %d IRQs for chip\n", - bd71828_irq_chip.num_irqs); + irqchip->num_irqs); - ret = regmap_irq_get_virq(irq_data, BD71828_INT_SHORTPUSH); - if (ret < 0) { - dev_err(&i2c->dev, "Failed to get the power-key IRQ\n"); - return ret; + if (button_irq) { + ret = regmap_irq_get_virq(irq_data, button_irq); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to get the power-key IRQ\n"); + return ret; + } + + button.irq = ret; } - button.irq = ret; + ret = set_clk_mode(&i2c->dev, regmap, clkmode_reg); + if (ret) + return ret; - ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, - bd71828_mfd_cells, - ARRAY_SIZE(bd71828_mfd_cells), NULL, 0, - regmap_irq_get_domain(irq_data)); + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells, + NULL, 0, regmap_irq_get_domain(irq_data)); if (ret) dev_err(&i2c->dev, "Failed to create subdevices\n"); @@ -325,7 +553,13 @@ static int bd71828_i2c_probe(struct i2c_client *i2c) } static const struct of_device_id bd71828_of_match[] = { - { .compatible = "rohm,bd71828", }, + { + .compatible = "rohm,bd71828", + .data = (void *)ROHM_CHIP_TYPE_BD71828, + }, { + .compatible = "rohm,bd71815", + .data = (void *)ROHM_CHIP_TYPE_BD71815, + }, { }, }; MODULE_DEVICE_TABLE(of, bd71828_of_match); diff --git a/include/linux/mfd/rohm-bd71815.h b/include/linux/mfd/rohm-bd71815.h new file mode 100644 index 000000000000..ec6d9612bebe --- /dev/null +++ b/include/linux/mfd/rohm-bd71815.h @@ -0,0 +1,562 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright 2021 ROHM Semiconductors. + * + * Author: Matti Vaittinen + * + * Copyright 2014 Embest Technology Co. Ltd. Inc. + * + * Author: yanglsh@embest-tech.com + */ + +#ifndef _MFD_BD71815_H +#define _MFD_BD71815_H + +#include + +enum { + BD71815_BUCK1 = 0, + BD71815_BUCK2, + BD71815_BUCK3, + BD71815_BUCK4, + BD71815_BUCK5, + /* General Purpose */ + BD71815_LDO1, + BD71815_LDO2, + BD71815_LDO3, + /* LDOs for SD Card and SD Card Interface */ + BD71815_LDO4, + BD71815_LDO5, + /* LDO for DDR Reference Voltage */ + BD71815_LDODVREF, + /* LDO for Low-Power State Retention */ + BD71815_LDOLPSR, + BD71815_WLED, + BD71815_REGULATOR_CNT, +}; + +#define BD71815_SUPPLY_STATE_ENABLED 0x1 + +enum { + BD71815_REG_DEVICE = 0, + BD71815_REG_PWRCTRL, + BD71815_REG_BUCK1_MODE, + BD71815_REG_BUCK2_MODE, + BD71815_REG_BUCK3_MODE, + BD71815_REG_BUCK4_MODE, + BD71815_REG_BUCK5_MODE, + BD71815_REG_BUCK1_VOLT_H, + BD71815_REG_BUCK1_VOLT_L, + BD71815_REG_BUCK2_VOLT_H, + BD71815_REG_BUCK2_VOLT_L, + BD71815_REG_BUCK3_VOLT, + BD71815_REG_BUCK4_VOLT, + BD71815_REG_BUCK5_VOLT, + BD71815_REG_LED_CTRL, + BD71815_REG_LED_DIMM, + BD71815_REG_LDO_MODE1, + BD71815_REG_LDO_MODE2, + BD71815_REG_LDO_MODE3, + BD71815_REG_LDO_MODE4, + BD71815_REG_LDO1_VOLT, + BD71815_REG_LDO2_VOLT, + BD71815_REG_LDO3_VOLT, + BD71815_REG_LDO4_VOLT, + BD71815_REG_LDO5_VOLT_H, + BD71815_REG_LDO5_VOLT_L, + BD71815_REG_BUCK_PD_DIS, + BD71815_REG_LDO_PD_DIS, + BD71815_REG_GPO, + BD71815_REG_OUT32K, + BD71815_REG_SEC, + BD71815_REG_MIN, + BD71815_REG_HOUR, + BD71815_REG_WEEK, + BD71815_REG_DAY, + BD71815_REG_MONTH, + BD71815_REG_YEAR, + BD71815_REG_ALM0_SEC, + + BD71815_REG_ALM1_SEC = 0x2C, + + BD71815_REG_ALM0_MASK = 0x33, + BD71815_REG_ALM1_MASK, + BD71815_REG_ALM2, + BD71815_REG_TRIM, + BD71815_REG_CONF, + BD71815_REG_SYS_INIT, + BD71815_REG_CHG_STATE, + BD71815_REG_CHG_LAST_STATE, + BD71815_REG_BAT_STAT, + BD71815_REG_DCIN_STAT, + BD71815_REG_VSYS_STAT, + BD71815_REG_CHG_STAT, + BD71815_REG_CHG_WDT_STAT, + BD71815_REG_BAT_TEMP, + BD71815_REG_IGNORE_0, + BD71815_REG_INHIBIT_0, + BD71815_REG_DCIN_CLPS, + BD71815_REG_VSYS_REG, + BD71815_REG_VSYS_MAX, + BD71815_REG_VSYS_MIN, + BD71815_REG_CHG_SET1, + BD71815_REG_CHG_SET2, + BD71815_REG_CHG_WDT_PRE, + BD71815_REG_CHG_WDT_FST, + BD71815_REG_CHG_IPRE, + BD71815_REG_CHG_IFST, + BD71815_REG_CHG_IFST_TERM, + BD71815_REG_CHG_VPRE, + BD71815_REG_CHG_VBAT_1, + BD71815_REG_CHG_VBAT_2, + BD71815_REG_CHG_VBAT_3, + BD71815_REG_CHG_LED_1, + BD71815_REG_VF_TH, + BD71815_REG_BAT_SET_1, + BD71815_REG_BAT_SET_2, + BD71815_REG_BAT_SET_3, + BD71815_REG_ALM_VBAT_TH_U, + BD71815_REG_ALM_VBAT_TH_L, + BD71815_REG_ALM_DCIN_TH, + BD71815_REG_ALM_VSYS_TH, + BD71815_REG_VM_IBAT_U, + BD71815_REG_VM_IBAT_L, + BD71815_REG_VM_VBAT_U, + BD71815_REG_VM_VBAT_L, + BD71815_REG_VM_BTMP, + BD71815_REG_VM_VTH, + BD71815_REG_VM_DCIN_U, + BD71815_REG_VM_DCIN_L, + BD71815_REG_VM_VSYS, + BD71815_REG_VM_VF, + BD71815_REG_VM_OCI_PRE_U, + BD71815_REG_VM_OCI_PRE_L, + BD71815_REG_VM_OCV_PRE_U, + BD71815_REG_VM_OCV_PRE_L, + BD71815_REG_VM_OCI_PST_U, + BD71815_REG_VM_OCI_PST_L, + BD71815_REG_VM_OCV_PST_U, + BD71815_REG_VM_OCV_PST_L, + BD71815_REG_VM_SA_VBAT_U, + BD71815_REG_VM_SA_VBAT_L, + BD71815_REG_VM_SA_IBAT_U, + BD71815_REG_VM_SA_IBAT_L, + BD71815_REG_CC_CTRL, + BD71815_REG_CC_BATCAP1_TH_U, + BD71815_REG_CC_BATCAP1_TH_L, + BD71815_REG_CC_BATCAP2_TH_U, + BD71815_REG_CC_BATCAP2_TH_L, + BD71815_REG_CC_BATCAP3_TH_U, + BD71815_REG_CC_BATCAP3_TH_L, + BD71815_REG_CC_STAT, + BD71815_REG_CC_CCNTD_3, + BD71815_REG_CC_CCNTD_2, + BD71815_REG_CC_CCNTD_1, + BD71815_REG_CC_CCNTD_0, + BD71815_REG_CC_CURCD_U, + BD71815_REG_CC_CURCD_L, + BD71815_REG_VM_OCUR_THR_1, + BD71815_REG_VM_OCUR_DUR_1, + BD71815_REG_VM_OCUR_THR_2, + BD71815_REG_VM_OCUR_DUR_2, + BD71815_REG_VM_OCUR_THR_3, + BD71815_REG_VM_OCUR_DUR_3, + BD71815_REG_VM_OCUR_MON, + BD71815_REG_VM_BTMP_OV_THR, + BD71815_REG_VM_BTMP_OV_DUR, + BD71815_REG_VM_BTMP_LO_THR, + BD71815_REG_VM_BTMP_LO_DUR, + BD71815_REG_VM_BTMP_MON, + BD71815_REG_INT_EN_01, + + BD71815_REG_INT_EN_11 = 0x95, + BD71815_REG_INT_EN_12, + BD71815_REG_INT_STAT, + BD71815_REG_INT_STAT_01, + BD71815_REG_INT_STAT_02, + BD71815_REG_INT_STAT_03, + BD71815_REG_INT_STAT_04, + BD71815_REG_INT_STAT_05, + BD71815_REG_INT_STAT_06, + BD71815_REG_INT_STAT_07, + BD71815_REG_INT_STAT_08, + BD71815_REG_INT_STAT_09, + BD71815_REG_INT_STAT_10, + BD71815_REG_INT_STAT_11, + BD71815_REG_INT_STAT_12, + BD71815_REG_INT_UPDATE, + + BD71815_REG_VM_VSYS_U = 0xC0, + BD71815_REG_VM_VSYS_L, + BD71815_REG_VM_SA_VSYS_U, + BD71815_REG_VM_SA_VSYS_L, + + BD71815_REG_VM_SA_IBAT_MIN_U = 0xD0, + BD71815_REG_VM_SA_IBAT_MIN_L, + BD71815_REG_VM_SA_IBAT_MAX_U, + BD71815_REG_VM_SA_IBAT_MAX_L, + BD71815_REG_VM_SA_VBAT_MIN_U, + BD71815_REG_VM_SA_VBAT_MIN_L, + BD71815_REG_VM_SA_VBAT_MAX_U, + BD71815_REG_VM_SA_VBAT_MAX_L, + BD71815_REG_VM_SA_VSYS_MIN_U, + BD71815_REG_VM_SA_VSYS_MIN_L, + BD71815_REG_VM_SA_VSYS_MAX_U, + BD71815_REG_VM_SA_VSYS_MAX_L, + BD71815_REG_VM_SA_MINMAX_CLR, + + BD71815_REG_REX_CCNTD_3 = 0xE0, + BD71815_REG_REX_CCNTD_2, + BD71815_REG_REX_CCNTD_1, + BD71815_REG_REX_CCNTD_0, + BD71815_REG_REX_SA_VBAT_U, + BD71815_REG_REX_SA_VBAT_L, + BD71815_REG_REX_CTRL_1, + BD71815_REG_REX_CTRL_2, + BD71815_REG_FULL_CCNTD_3, + BD71815_REG_FULL_CCNTD_2, + BD71815_REG_FULL_CCNTD_1, + BD71815_REG_FULL_CCNTD_0, + BD71815_REG_FULL_CTRL, + + BD71815_REG_CCNTD_CHG_3 = 0xF0, + BD71815_REG_CCNTD_CHG_2, + + BD71815_REG_TEST_MODE = 0xFE, + BD71815_MAX_REGISTER, +}; + +/* BD71815_REG_BUCK1_MODE bits */ +#define BD71815_BUCK_RAMPRATE_MASK 0xC0 +#define BD71815_BUCK_RAMPRATE_10P00MV 0x0 +#define BD71815_BUCK_RAMPRATE_5P00MV 0x01 +#define BD71815_BUCK_RAMPRATE_2P50MV 0x02 +#define BD71815_BUCK_RAMPRATE_1P25MV 0x03 + +#define BD71815_BUCK_PWM_FIXED BIT(4) +#define BD71815_BUCK_SNVS_ON BIT(3) +#define BD71815_BUCK_RUN_ON BIT(2) +#define BD71815_BUCK_LPSR_ON BIT(1) +#define BD71815_BUCK_SUSP_ON BIT(0) + +/* BD71815_REG_BUCK1_VOLT_H bits */ +#define BD71815_BUCK_DVSSEL BIT(7) +#define BD71815_BUCK_STBY_DVS BIT(6) +#define BD71815_VOLT_MASK 0x3F +#define BD71815_BUCK1_H_DEFAULT 0x14 +#define BD71815_BUCK1_L_DEFAULT 0x14 + +/* BD71815_REG_BUCK2_VOLT_H bits */ +#define BD71815_BUCK2_H_DEFAULT 0x14 +#define BD71815_BUCK2_L_DEFAULT 0x14 + +/* WLED output */ +/* current register mask */ +#define LED_DIMM_MASK 0x3f +/* LED enable bits at LED_CTRL reg */ +#define LED_CHGDONE_EN BIT(4) +#define LED_RUN_ON BIT(2) +#define LED_LPSR_ON BIT(1) +#define LED_SUSP_ON BIT(0) + +/* BD71815_REG_LDO1_CTRL bits */ +#define LDO1_EN BIT(0) +#define LDO2_EN BIT(1) +#define LDO3_EN BIT(2) +#define DVREF_EN BIT(3) +#define VOSNVS_SW_EN BIT(4) + +/* LDO_MODE1_register */ +#define LDO1_SNVS_ON BIT(7) +#define LDO1_RUN_ON BIT(6) +#define LDO1_LPSR_ON BIT(5) +#define LDO1_SUSP_ON BIT(4) +/* set => register control, unset => GPIO control */ +#define LDO4_MODE_MASK BIT(3) +#define LDO4_MODE_I2C BIT(3) +#define LDO4_MODE_GPIO 0 +/* set => register control, unset => start when DCIN connected */ +#define LDO3_MODE_MASK BIT(2) +#define LDO3_MODE_I2C BIT(2) +#define LDO3_MODE_DCIN 0 + +/* LDO_MODE2 register */ +#define LDO3_SNVS_ON BIT(7) +#define LDO3_RUN_ON BIT(6) +#define LDO3_LPSR_ON BIT(5) +#define LDO3_SUSP_ON BIT(4) +#define LDO2_SNVS_ON BIT(3) +#define LDO2_RUN_ON BIT(2) +#define LDO2_LPSR_ON BIT(1) +#define LDO2_SUSP_ON BIT(0) + + +/* LDO_MODE3 register */ +#define LDO5_SNVS_ON BIT(7) +#define LDO5_RUN_ON BIT(6) +#define LDO5_LPSR_ON BIT(5) +#define LDO5_SUSP_ON BIT(4) +#define LDO4_SNVS_ON BIT(3) +#define LDO4_RUN_ON BIT(2) +#define LDO4_LPSR_ON BIT(1) +#define LDO4_SUSP_ON BIT(0) + +/* LDO_MODE4 register */ +#define DVREF_SNVS_ON BIT(7) +#define DVREF_RUN_ON BIT(6) +#define DVREF_LPSR_ON BIT(5) +#define DVREF_SUSP_ON BIT(4) +#define LDO_LPSR_SNVS_ON BIT(3) +#define LDO_LPSR_RUN_ON BIT(2) +#define LDO_LPSR_LPSR_ON BIT(1) +#define LDO_LPSR_SUSP_ON BIT(0) + +/* BD71815_REG_OUT32K bits */ +#define OUT32K_EN BIT(0) +#define OUT32K_MODE BIT(1) +#define OUT32K_MODE_CMOS BIT(1) +#define OUT32K_MODE_OPEN_DRAIN 0 + +/* BD71815_REG_BAT_STAT bits */ +#define BAT_DET BIT(5) +#define BAT_DET_OFFSET 5 +#define BAT_DET_DONE BIT(4) +#define VBAT_OV BIT(3) +#define DBAT_DET BIT(0) + +/* BD71815_REG_VBUS_STAT bits */ +#define VBUS_DET BIT(0) + +#define BD71815_REG_RTC_START BD71815_REG_SEC +#define BD71815_REG_RTC_ALM_START BD71815_REG_ALM0_SEC + +/* BD71815_REG_ALM0_MASK bits */ +#define A0_ONESEC BIT(7) + +/* BD71815_REG_INT_EN_00 bits */ +#define ALMALE BIT(0) + +/* BD71815_REG_INT_STAT_03 bits */ +#define DCIN_MON_DET BIT(1) +#define DCIN_MON_RES BIT(0) +#define POWERON_LONG BIT(2) +#define POWERON_MID BIT(3) +#define POWERON_SHORT BIT(4) +#define POWERON_PRESS BIT(5) + +/* BD71805_REG_INT_STAT_08 bits */ +#define VBAT_MON_DET BIT(1) +#define VBAT_MON_RES BIT(0) + +/* BD71805_REG_INT_STAT_11 bits */ +#define INT_STAT_11_VF_DET BIT(7) +#define INT_STAT_11_VF_RES BIT(6) +#define INT_STAT_11_VF125_DET BIT(5) +#define INT_STAT_11_VF125_RES BIT(4) +#define INT_STAT_11_OVTMP_DET BIT(3) +#define INT_STAT_11_OVTMP_RES BIT(2) +#define INT_STAT_11_LOTMP_DET BIT(1) +#define INT_STAT_11_LOTMP_RES BIT(0) + +#define VBAT_MON_DET BIT(1) +#define VBAT_MON_RES BIT(0) + +/* BD71815_REG_PWRCTRL bits */ +#define RESTARTEN BIT(0) + +/* BD71815_REG_GPO bits */ +#define READY_FORCE_LOW BIT(2) +#define BD71815_GPIO_DRIVE_MASK BIT(4) +#define BD71815_GPIO_OPEN_DRAIN 0 +#define BD71815_GPIO_CMOS BIT(4) + +/* BD71815 interrupt masks */ +enum { + BD71815_INT_EN_01_BUCKAST_MASK = 0x0F, + BD71815_INT_EN_02_DCINAST_MASK = 0x3E, + BD71815_INT_EN_03_DCINAST_MASK = 0x3F, + BD71815_INT_EN_04_VSYSAST_MASK = 0xCF, + BD71815_INT_EN_05_CHGAST_MASK = 0xFC, + BD71815_INT_EN_06_BATAST_MASK = 0xF3, + BD71815_INT_EN_07_BMONAST_MASK = 0xFE, + BD71815_INT_EN_08_BMONAST_MASK = 0x03, + BD71815_INT_EN_09_BMONAST_MASK = 0x07, + BD71815_INT_EN_10_BMONAST_MASK = 0x3F, + BD71815_INT_EN_11_TMPAST_MASK = 0xFF, + BD71815_INT_EN_12_ALMAST_MASK = 0x07, +}; +/* BD71815 interrupt irqs */ +enum { + /* BUCK reg interrupts */ + BD71815_INT_BUCK1_OCP, + BD71815_INT_BUCK2_OCP, + BD71815_INT_BUCK3_OCP, + BD71815_INT_BUCK4_OCP, + BD71815_INT_BUCK5_OCP, + BD71815_INT_LED_OVP, + BD71815_INT_LED_OCP, + BD71815_INT_LED_SCP, + /* DCIN1 interrupts */ + BD71815_INT_DCIN_RMV, + BD71815_INT_CLPS_OUT, + BD71815_INT_CLPS_IN, + BD71815_INT_DCIN_OVP_RES, + BD71815_INT_DCIN_OVP_DET, + /* DCIN2 interrupts */ + BD71815_INT_DCIN_MON_RES, + BD71815_INT_DCIN_MON_DET, + BD71815_INT_WDOG, + /* Vsys INT_STAT_04 */ + BD71815_INT_VSYS_UV_RES, + BD71815_INT_VSYS_UV_DET, + BD71815_INT_VSYS_LOW_RES, + BD71815_INT_VSYS_LOW_DET, + BD71815_INT_VSYS_MON_RES, + BD71815_INT_VSYS_MON_DET, + /* Charger INT_STAT_05 */ + BD71815_INT_CHG_WDG_TEMP, + BD71815_INT_CHG_WDG_TIME, + BD71815_INT_CHG_RECHARGE_RES, + BD71815_INT_CHG_RECHARGE_DET, + BD71815_INT_CHG_RANGED_TEMP_TRANSITION, + BD71815_INT_CHG_STATE_TRANSITION, + /* Battery INT_STAT_06 */ + BD71815_INT_BAT_TEMP_NORMAL, + BD71815_INT_BAT_TEMP_ERANGE, + BD71815_INT_BAT_REMOVED, + BD71815_INT_BAT_DETECTED, + BD71815_INT_THERM_REMOVED, + BD71815_INT_THERM_DETECTED, + /* Battery Mon 1 INT_STAT_07 */ + BD71815_INT_BAT_DEAD, + BD71815_INT_BAT_SHORTC_RES, + BD71815_INT_BAT_SHORTC_DET, + BD71815_INT_BAT_LOW_VOLT_RES, + BD71815_INT_BAT_LOW_VOLT_DET, + BD71815_INT_BAT_OVER_VOLT_RES, + BD71815_INT_BAT_OVER_VOLT_DET, + /* Battery Mon 2 INT_STAT_08 */ + BD71815_INT_BAT_MON_RES, + BD71815_INT_BAT_MON_DET, + /* Battery Mon 3 (Coulomb counter) INT_STAT_09 */ + BD71815_INT_BAT_CC_MON1, + BD71815_INT_BAT_CC_MON2, + BD71815_INT_BAT_CC_MON3, + /* Battery Mon 4 INT_STAT_10 */ + BD71815_INT_BAT_OVER_CURR_1_RES, + BD71815_INT_BAT_OVER_CURR_1_DET, + BD71815_INT_BAT_OVER_CURR_2_RES, + BD71815_INT_BAT_OVER_CURR_2_DET, + BD71815_INT_BAT_OVER_CURR_3_RES, + BD71815_INT_BAT_OVER_CURR_3_DET, + /* Temperature INT_STAT_11 */ + BD71815_INT_TEMP_BAT_LOW_RES, + BD71815_INT_TEMP_BAT_LOW_DET, + BD71815_INT_TEMP_BAT_HI_RES, + BD71815_INT_TEMP_BAT_HI_DET, + BD71815_INT_TEMP_CHIP_OVER_125_RES, + BD71815_INT_TEMP_CHIP_OVER_125_DET, + BD71815_INT_TEMP_CHIP_OVER_VF_RES, + BD71815_INT_TEMP_CHIP_OVER_VF_DET, + /* RTC Alarm INT_STAT_12 */ + BD71815_INT_RTC0, + BD71815_INT_RTC1, + BD71815_INT_RTC2, +}; + +#define BD71815_INT_BUCK1_OCP_MASK BIT(0) +#define BD71815_INT_BUCK2_OCP_MASK BIT(1) +#define BD71815_INT_BUCK3_OCP_MASK BIT(2) +#define BD71815_INT_BUCK4_OCP_MASK BIT(3) +#define BD71815_INT_BUCK5_OCP_MASK BIT(4) +#define BD71815_INT_LED_OVP_MASK BIT(5) +#define BD71815_INT_LED_OCP_MASK BIT(6) +#define BD71815_INT_LED_SCP_MASK BIT(7) + +#define BD71815_INT_DCIN_RMV_MASK BIT(1) +#define BD71815_INT_CLPS_OUT_MASK BIT(2) +#define BD71815_INT_CLPS_IN_MASK BIT(3) +#define BD71815_INT_DCIN_OVP_RES_MASK BIT(4) +#define BD71815_INT_DCIN_OVP_DET_MASK BIT(5) + +#define BD71815_INT_DCIN_MON_RES_MASK BIT(0) +#define BD71815_INT_DCIN_MON_DET_MASK BIT(1) +#define BD71815_INT_WDOG_MASK BIT(6) + +#define BD71815_INT_VSYS_UV_RES_MASK BIT(0) +#define BD71815_INT_VSYS_UV_DET_MASK BIT(1) +#define BD71815_INT_VSYS_LOW_RES_MASK BIT(2) +#define BD71815_INT_VSYS_LOW_DET_MASK BIT(3) +#define BD71815_INT_VSYS_MON_RES_MASK BIT(6) +#define BD71815_INT_VSYS_MON_DET_MASK BIT(7) + +#define BD71815_INT_CHG_WDG_TEMP_MASK BIT(2) +#define BD71815_INT_CHG_WDG_TIME_MASK BIT(3) +#define BD71815_INT_CHG_RECHARGE_RES_MASK BIT(4) +#define BD71815_INT_CHG_RECHARGE_DET_MASK BIT(5) +#define BD71815_INT_CHG_RANGED_TEMP_TRANSITION_MASK BIT(6) +#define BD71815_INT_CHG_STATE_TRANSITION_MASK BIT(7) + +#define BD71815_INT_BAT_TEMP_NORMAL_MASK BIT(0) +#define BD71815_INT_BAT_TEMP_ERANGE_MASK BIT(1) +#define BD71815_INT_BAT_REMOVED_MASK BIT(4) +#define BD71815_INT_BAT_DETECTED_MASK BIT(5) +#define BD71815_INT_THERM_REMOVED_MASK BIT(6) +#define BD71815_INT_THERM_DETECTED_MASK BIT(7) + +#define BD71815_INT_BAT_DEAD_MASK BIT(1) +#define BD71815_INT_BAT_SHORTC_RES_MASK BIT(2) +#define BD71815_INT_BAT_SHORTC_DET_MASK BIT(3) +#define BD71815_INT_BAT_LOW_VOLT_RES_MASK BIT(4) +#define BD71815_INT_BAT_LOW_VOLT_DET_MASK BIT(5) +#define BD71815_INT_BAT_OVER_VOLT_RES_MASK BIT(6) +#define BD71815_INT_BAT_OVER_VOLT_DET_MASK BIT(7) + +#define BD71815_INT_BAT_MON_RES_MASK BIT(0) +#define BD71815_INT_BAT_MON_DET_MASK BIT(1) + +#define BD71815_INT_BAT_CC_MON1_MASK BIT(0) +#define BD71815_INT_BAT_CC_MON2_MASK BIT(1) +#define BD71815_INT_BAT_CC_MON3_MASK BIT(2) + +#define BD71815_INT_BAT_OVER_CURR_1_RES_MASK BIT(0) +#define BD71815_INT_BAT_OVER_CURR_1_DET_MASK BIT(1) +#define BD71815_INT_BAT_OVER_CURR_2_RES_MASK BIT(2) +#define BD71815_INT_BAT_OVER_CURR_2_DET_MASK BIT(3) +#define BD71815_INT_BAT_OVER_CURR_3_RES_MASK BIT(4) +#define BD71815_INT_BAT_OVER_CURR_3_DET_MASK BIT(5) + +#define BD71815_INT_TEMP_BAT_LOW_RES_MASK BIT(0) +#define BD71815_INT_TEMP_BAT_LOW_DET_MASK BIT(1) +#define BD71815_INT_TEMP_BAT_HI_RES_MASK BIT(2) +#define BD71815_INT_TEMP_BAT_HI_DET_MASK BIT(3) +#define BD71815_INT_TEMP_CHIP_OVER_125_RES_MASK BIT(4) +#define BD71815_INT_TEMP_CHIP_OVER_125_DET_MASK BIT(5) +#define BD71815_INT_TEMP_CHIP_OVER_VF_RES_MASK BIT(6) +#define BD71815_INT_TEMP_CHIP_OVER_VF_DET_MASK BIT(7) + +#define BD71815_INT_RTC0_MASK BIT(0) +#define BD71815_INT_RTC1_MASK BIT(1) +#define BD71815_INT_RTC2_MASK BIT(2) + +/* BD71815_REG_CC_CTRL bits */ +#define CCNTRST 0x80 +#define CCNTENB 0x40 +#define CCCALIB 0x20 + +/* BD71815_REG_CC_CURCD */ +#define CURDIR_Discharging 0x8000 + +/* BD71815_REG_VM_SA_IBAT */ +#define IBAT_SA_DIR_Discharging 0x8000 + +/* BD71815_REG_REX_CTRL_1 bits */ +#define REX_CLR BIT(4) + +/* BD71815_REG_REX_CTRL_1 bits */ +#define REX_PMU_STATE_MASK BIT(2) + +/* BD71815_REG_LED_CTRL bits */ +#define CHGDONE_LED_EN BIT(4) + +#endif /* __LINUX_MFD_BD71815_H */ diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h index 017a4c01cb31..c7ab69c87ee8 100644 --- a/include/linux/mfd/rohm-bd71828.h +++ b/include/linux/mfd/rohm-bd71828.h @@ -151,6 +151,9 @@ enum { #define BD71828_REG_GPIO_CTRL3 0x49 #define BD71828_REG_IO_STAT 0xed +/* clk */ +#define BD71828_REG_OUT32K 0x4b + /* RTC */ #define BD71828_REG_RTC_SEC 0x4c #define BD71828_REG_RTC_MINUTE 0x4d From patchwork Mon Mar 29 12:57:33 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 410935 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 5FF80C433DB for ; Mon, 29 Mar 2021 12:58:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 410696191D for ; Mon, 29 Mar 2021 12:58:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229441AbhC2M5z (ORCPT ); Mon, 29 Mar 2021 08:57:55 -0400 Received: from mail-lj1-f180.google.com ([209.85.208.180]:33450 "EHLO mail-lj1-f180.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230239AbhC2M5l (ORCPT ); Mon, 29 Mar 2021 08:57:41 -0400 Received: by mail-lj1-f180.google.com with SMTP id 15so15879208ljj.0; Mon, 29 Mar 2021 05:57:40 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=UJNxYjxrYMcId07K6NsPlynPvsrOQqM+TOZJRJlcxV0=; b=FsNlsRcoqQdcAO99DklRAyuMnM0su+ortDoRzgaYWn8tWfLk6/pvizT4svuzRkLVxO NIxbvy4cqvbGhOYK0YLeD1ReHFfoYBW8N+9dJWD+BuuixJXgn7G39sKNb3jav4RJ9g/I xreUkf/CrQo1J7muxLF+4Wq/7GO9mvPuDzcoaq4EpAc4joj+m/TbMjLF51GWRepEirx4 zJHYsRK8XIYNKxJM89K519elIwrWGytHQLkPqKn0SY5hRcLPM5182BMfVRC42qLUgOQx Asst3aD4chLszszJRlE8AqAuL+0hAfyK4yvQayaJBKeJEg8dhxlGEtdOHG9AUNu+rmok zsAg== X-Gm-Message-State: AOAM533H79927FcZWva1XdnacxGwGlhNWleONBYqaQRPIkls77jN2CJx kGXnTGG9t/JDZ/AO4n0axeQ= X-Google-Smtp-Source: ABdhPJx7/4UdgSOjVVfPgToQqq1yxgLT5E6TYnTbWd0q+VpDRtRmr88wF4Na+h1uPQTqbswOgHCZ1g== X-Received: by 2002:a2e:9c1:: with SMTP id 184mr18228750ljj.481.1617022660003; Mon, 29 Mar 2021 05:57:40 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyyby-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::2]) by smtp.gmail.com with ESMTPSA id z10sm1823970lfa.201.2021.03.29.05.57.39 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Mar 2021 05:57:39 -0700 (PDT) Date: Mon, 29 Mar 2021 15:57:33 +0300 From: Matti Vaittinen To: Matti Vaittinen Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com Subject: [PATCH v5 10/19] regulator: helpers: Export helper voltage listing Message-ID: <1200ef7a50c84327ada019b85f6527b4fc9b5ce1.1617020713.git.matti.vaittinen@fi.rohmeurope.com> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Some drivers need to translate voltage values to selectors prior regulator registration. Currently a regulator_desc based list_voltages helper is only exported for regulators using the linear_ranges. Export similar helper also for regulators using simple linear mapping. Signed-off-by: Matti Vaittinen --- Changes since v3: - No changes drivers/regulator/helpers.c | 36 +++++++++++++++++++++++++------- include/linux/regulator/driver.h | 2 ++ 2 files changed, 30 insertions(+), 8 deletions(-) diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index f42b394a0c46..3e19ecbf7267 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -508,6 +508,33 @@ int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev, } EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range); +/** + * regulator_desc_list_voltage_linear - List voltages with simple calculation + * + * @desc: Regulator desc for regulator which volatges are to be listed + * @selector: Selector to convert into a voltage + * + * Regulators with a simple linear mapping between voltages and + * selectors can set min_uV and uV_step in the regulator descriptor + * and then use this function prior regulator registration to list + * the voltages. This is useful when voltages need to be listed during + * device-tree parsing. + */ +int regulator_desc_list_voltage_linear(const struct regulator_desc *desc, + unsigned int selector) +{ + if (selector >= desc->n_voltages) + return -EINVAL; + + if (selector < desc->linear_min_sel) + return 0; + + selector -= desc->linear_min_sel; + + return desc->min_uV + (desc->uV_step * selector); +} +EXPORT_SYMBOL_GPL(regulator_desc_list_voltage_linear); + /** * regulator_list_voltage_linear - List voltages with simple calculation * @@ -521,14 +548,7 @@ EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range); int regulator_list_voltage_linear(struct regulator_dev *rdev, unsigned int selector) { - if (selector >= rdev->desc->n_voltages) - return -EINVAL; - if (selector < rdev->desc->linear_min_sel) - return 0; - - selector -= rdev->desc->linear_min_sel; - - return rdev->desc->min_uV + (rdev->desc->uV_step * selector); + return regulator_desc_list_voltage_linear(rdev->desc, selector); } EXPORT_SYMBOL_GPL(regulator_list_voltage_linear); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index d7c77ee370f3..39a540111645 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -543,4 +543,6 @@ void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); int regulator_desc_list_voltage_linear_range(const struct regulator_desc *desc, unsigned int selector); +int regulator_desc_list_voltage_linear(const struct regulator_desc *desc, + unsigned int selector); #endif From patchwork Mon Mar 29 12:59:04 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 410934 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 46A1DC433E0 for ; Mon, 29 Mar 2021 13:00:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 1ACAD61922 for ; Mon, 29 Mar 2021 13:00:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231308AbhC2M7e (ORCPT ); Mon, 29 Mar 2021 08:59:34 -0400 Received: from mail-lf1-f53.google.com ([209.85.167.53]:37581 "EHLO mail-lf1-f53.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231565AbhC2M7M (ORCPT ); Mon, 29 Mar 2021 08:59:12 -0400 Received: by mail-lf1-f53.google.com with SMTP id q29so18224942lfb.4; Mon, 29 Mar 2021 05:59:11 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=jfHxEj2A/gJhrIjTGvqiQOWPNM93N/Km1CsIkoTYEkg=; b=J9J2WNOC7cSKT9TbYLpIGKJjGn32lbd4jQMqImd+VBeshcw3eeYKFdwbpqs2n9zw5o U/wGn/59pztuJele95oUBZxAPpmwsJ16fZi/J40XKkrceFnogELnGh4hwYClqKlw8KvX xNRUDt26pPZJkChI7qYp9TH0QZ2QO0g2ZlSBhvTpsy34GjaLZEAT1Y3ZaeDk6O4cUmSk ErQMDDSGFenOmYsvg9AClSGfzEezkqg8V6XlJomoVdKfHGNhB79blqfFP1A4Fjps9NQt j2mFn3dS/w0K5jyHV7hI0P+tSGKZcuPzGd2BAf9gLv0gtaEyEvHr9II+labpZ7bemqYf dlaA== X-Gm-Message-State: AOAM533J67OSJufTxy8xDCZrwc6kUZLLV2IeW8h48o+9m09zbC78C5th SrE1RjgVxFmmd6q3GRjqJQA= X-Google-Smtp-Source: ABdhPJx2G8hPAXa16TStU29b5H9af5ao9230s1c6nAxAQ1maan4oAL4CJf05I2k7fQm2odTtlMvWVg== X-Received: by 2002:a05:6512:20c6:: with SMTP id u6mr16081823lfr.493.1617022750926; Mon, 29 Mar 2021 05:59:10 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyyby-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::2]) by smtp.gmail.com with ESMTPSA id e25sm2432217ljo.113.2021.03.29.05.59.09 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Mar 2021 05:59:10 -0700 (PDT) Date: Mon, 29 Mar 2021 15:59:04 +0300 From: Matti Vaittinen To: Matti Vaittinen Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com Subject: [PATCH v5 13/19] regulator: Add regmap helper for ramp-delay setting Message-ID: References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Quite a few regulator ICs do support setting ramp-delay by writing a value matching the delay to a ramp-delay register. Provide a simple helper for table-based delay setting. Signed-off-by: Matti Vaittinen --- Changes since v4: - new patch drivers/regulator/helpers.c | 65 ++++++++++++++++++++++++++++++++ include/linux/regulator/driver.h | 5 +++ 2 files changed, 70 insertions(+) diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c index 3e19ecbf7267..0e16e31c968f 100644 --- a/drivers/regulator/helpers.c +++ b/drivers/regulator/helpers.c @@ -901,3 +901,68 @@ bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2) return reg1->rdev == reg2->rdev; } EXPORT_SYMBOL_GPL(regulator_is_equal); + +static int find_closest_bigger(unsigned int target, const unsigned int *table, + unsigned int num_sel, unsigned int *sel) +{ + unsigned int s, tmp, max, maxsel = 0; + bool found = false; + + max = table[0]; + + for (s = 0; s < num_sel; s++) { + if (table[s] > max) { + max = table[s]; + maxsel = s; + } + if (table[s] >= target) { + if (!found || table[s] - target < tmp - target) { + tmp = table[s]; + *sel = s; + found = true; + if (tmp == target) + break; + } + } + } + + if (!found) { + *sel = maxsel; + return -EINVAL; + } + + return 0; +} + +/** + * regulator_set_ramp_delay_regmap - set_ramp_delay() helper + * + * @rdev: regulator to operate on + * + * Regulators that use regmap for their register I/O can set the ramp_reg + * and ramp_mask fields in their descriptor and then use this as their + * set_ramp_delay operation, saving some code. + */ +int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay) +{ + int ret; + unsigned int sel; + + if (!rdev->desc->n_ramp_values) + return -EINVAL; + + ret = find_closest_bigger(ramp_delay, rdev->desc->ramp_delay_table, + rdev->desc->n_ramp_values, &sel); + + if (ret) { + dev_warn(rdev_get_dev(rdev), + "Can't set ramp-delay %u, setting %u\n", ramp_delay, + rdev->desc->ramp_delay_table[sel]); + } + + sel <<= ffs(rdev->desc->ramp_mask) - 1; + + return regmap_update_bits(rdev->regmap, rdev->desc->ramp_reg, + rdev->desc->ramp_mask, sel); +} +EXPORT_SYMBOL_GPL(regulator_set_ramp_delay_regmap); diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 39a540111645..597ed117086f 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -373,6 +373,10 @@ struct regulator_desc { unsigned int pull_down_reg; unsigned int pull_down_mask; unsigned int pull_down_val_on; + unsigned int ramp_reg; + unsigned int ramp_mask; + const unsigned int *ramp_delay_table; + unsigned int n_ramp_values; unsigned int enable_time; @@ -535,6 +539,7 @@ int regulator_set_current_limit_regmap(struct regulator_dev *rdev, int min_uA, int max_uA); int regulator_get_current_limit_regmap(struct regulator_dev *rdev); void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data); +int regulator_set_ramp_delay_regmap(struct regulator_dev *rdev, int ramp_delay); /* * Helper functions intended to be used by regulator drivers prior registering From patchwork Mon Mar 29 12:59:51 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Vaittinen, Matti" X-Patchwork-Id: 410933 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-13.8 required=3.0 tests=BAYES_00, HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER,INCLUDES_PATCH, MAILING_LIST_MULTI, SPF_HELO_NONE, SPF_PASS autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 9D5A1C433C1 for ; Mon, 29 Mar 2021 13:00:36 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 7836761938 for ; Mon, 29 Mar 2021 13:00:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S231362AbhC2NAG (ORCPT ); Mon, 29 Mar 2021 09:00:06 -0400 Received: from mail-lj1-f175.google.com ([209.85.208.175]:44858 "EHLO mail-lj1-f175.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S231691AbhC2M77 (ORCPT ); Mon, 29 Mar 2021 08:59:59 -0400 Received: by mail-lj1-f175.google.com with SMTP id u9so15778846ljd.11; Mon, 29 Mar 2021 05:59:58 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:date:from:to:cc:subject:message-id:references :mime-version:content-disposition:in-reply-to; bh=VzUn1AUaeQNGRHAzUxvZg52TByaIYolA595EZsHDl/0=; b=TjVxijtSglmgaxroyIxzsRFBmQBbVn3Ge0/QQNZWj2afetVCaJVEeP7t4C/K3KptNW AG6z8IA7DIb8zgPAMFEVSUvTSOddt7ZRHzSFcSkAFfMMkp0bqviiTCIpWhNC6tIUVt8d E469DnkmVOSgyqDprStFNFRqSN5YpbtOUo64b1VpjO3foV59mN97+n5tszO3MZSg8ZAR a1TUjjTBS9lmh5F0iF/SthK2lCEKdYml+0karbN260KAgfu0mab7onTZfEuShcvli1by pE/2E1rtU8pJTEVgP7te/tZ4nD9kXjWRoF52kLTCBBeYmWdescnNDq/WxTfr2CQ9E3CL 9Mqw== X-Gm-Message-State: AOAM533vjkQrFZ3iWjgXJpJNznNQzEbahiyYD8w512OsbJGjkaE+gt/g oSLL3G39wzEDUgOLMF2kBh7DawGaCaPKLQ== X-Google-Smtp-Source: ABdhPJwsKI5QbEKyke0iUg3jNLDTVy39aK2VRPGQUxqRNnzOZtVwBtZbDF3XcZ9jaQqRxUX91k2wqQ== X-Received: by 2002:a2e:910b:: with SMTP id m11mr18060672ljg.179.1617022797852; Mon, 29 Mar 2021 05:59:57 -0700 (PDT) Received: from localhost.localdomain (dc7vkhyyyyyyyyyyyyyby-3.rev.dnainternet.fi. [2001:14ba:16e2:8300::2]) by smtp.gmail.com with ESMTPSA id f1sm2522355ljk.126.2021.03.29.05.59.56 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Mon, 29 Mar 2021 05:59:57 -0700 (PDT) Date: Mon, 29 Mar 2021 15:59:51 +0300 From: Matti Vaittinen To: Matti Vaittinen Cc: Lee Jones , Rob Herring , Liam Girdwood , Mark Brown , Matti Vaittinen , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-power@fi.rohmeurope.com Subject: [PATCH v5 15/19] regulator: Support ROHM BD71815 regulators Message-ID: References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Support voltage control for regulators on ROHM BD71815 PMIC. ROHM BD71815 contains 5 bucks, 7 LDOs and a boost (intended for LED). Bucks 1 and 2 support HW state based voltage level and enable states. Other regulators support HW state based enable states. All bucks and LDOs 1-5 allow voltage changes for RUN state and LDO4 can be enabled/disabled via GPIO. LDO3 does support changing between two predetermined voltages by using a GPIO but this functionality is not included in this commit. This work is derived from driver originally written by Tony Luo - although not much of original work is left. Signed-off-by: Matti Vaittinen Acked-by: Mark Brown --- No changes since v4 drivers/regulator/Kconfig | 11 + drivers/regulator/Makefile | 1 + drivers/regulator/bd71815-regulator.c | 676 ++++++++++++++++++++++++++ 3 files changed, 688 insertions(+) create mode 100644 drivers/regulator/bd71815-regulator.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 77c43134bc9e..6437348ce862 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -204,6 +204,17 @@ config REGULATOR_BD70528 This driver can also be built as a module. If so, the module will be called bd70528-regulator. +config REGULATOR_BD71815 + tristate "ROHM BD71815 Power Regulator" + depends on MFD_ROHM_BD71828 + help + This driver supports voltage regulators on ROHM BD71815 PMIC. + This will enable support for the software controllable buck + and LDO regulators and a current regulator for LEDs. + + This driver can also be built as a module. If so, the module + will be called bd71815-regulator. + config REGULATOR_BD71828 tristate "ROHM BD71828 Power Regulator" depends on MFD_ROHM_BD71828 diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 44d2f8bf4b74..c6f84a332fdd 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o +obj-$(CONFIG_REGULATOR_BD71815) += bd71815-regulator.o obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o diff --git a/drivers/regulator/bd71815-regulator.c b/drivers/regulator/bd71815-regulator.c new file mode 100644 index 000000000000..b1448e34c629 --- /dev/null +++ b/drivers/regulator/bd71815-regulator.c @@ -0,0 +1,676 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright 2014 Embest Technology Co. Ltd. Inc. + * bd71815-regulator.c ROHM BD71815 regulator driver + * + * Author: Tony Luo + * + * Partially rewritten at 2021 by + * Matti Vaittinen + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct bd71815_regulator { + struct regulator_desc desc; + const struct rohm_dvs_config *dvs; +}; + +struct bd71815_pmic { + struct bd71815_regulator descs[BD71815_REGULATOR_CNT]; + struct regmap *regmap; + struct device *dev; + struct gpio_descs *gps; + struct regulator_dev *rdev[BD71815_REGULATOR_CNT]; +}; + +static const int bd7181x_wled_currents[] = { + 10, 20, 30, 50, 70, 100, 200, 300, 500, 700, 1000, 2000, 3000, 4000, + 5000, 6000, 7000, 8000, 9000, 10000, 11000, 12000, 13000, 14000, 15000, + 16000, 17000, 18000, 19000, 20000, 21000, 22000, 23000, 24000, 25000, +}; + +static const struct rohm_dvs_config buck1_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK1_VOLT_H, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_reg = BD71815_REG_BUCK1_VOLT_L, + .suspend_mask = BD71815_VOLT_MASK, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_reg = BD71815_REG_BUCK1_VOLT_L, + .lpsr_mask = BD71815_VOLT_MASK, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config buck2_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK2_VOLT_H, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_reg = BD71815_REG_BUCK2_VOLT_L, + .suspend_mask = BD71815_VOLT_MASK, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_reg = BD71815_REG_BUCK2_VOLT_L, + .lpsr_mask = BD71815_VOLT_MASK, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config buck3_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK3_VOLT, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config buck4_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK4_VOLT, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo1_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE1, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO1_RUN_ON, + .snvs_on_mask = LDO1_SNVS_ON, + .suspend_on_mask = LDO1_SUSP_ON, + .lpsr_on_mask = LDO1_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo2_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE2, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO2_RUN_ON, + .snvs_on_mask = LDO2_SNVS_ON, + .suspend_on_mask = LDO2_SUSP_ON, + .lpsr_on_mask = LDO2_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo3_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE2, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO3_RUN_ON, + .snvs_on_mask = LDO3_SNVS_ON, + .suspend_on_mask = LDO3_SUSP_ON, + .lpsr_on_mask = LDO3_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo4_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE3, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO4_RUN_ON, + .snvs_on_mask = LDO4_SNVS_ON, + .suspend_on_mask = LDO4_SUSP_ON, + .lpsr_on_mask = LDO4_LPSR_ON, +}; + +static const struct rohm_dvs_config ldo5_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_LDO_MODE3, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = LDO5_RUN_ON, + .snvs_on_mask = LDO5_SNVS_ON, + .suspend_on_mask = LDO5_SUSP_ON, + .lpsr_on_mask = LDO5_LPSR_ON, +}; + +static const struct rohm_dvs_config dvref_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_on_mask = DVREF_RUN_ON, + .snvs_on_mask = DVREF_SNVS_ON, + .suspend_on_mask = DVREF_SUSP_ON, + .lpsr_on_mask = DVREF_LPSR_ON, +}; + +static const struct rohm_dvs_config ldolpsr_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_on_mask = DVREF_RUN_ON, + .snvs_on_mask = DVREF_SNVS_ON, + .suspend_on_mask = DVREF_SUSP_ON, + .lpsr_on_mask = DVREF_LPSR_ON, +}; + +static const struct rohm_dvs_config buck5_dvs = { + .level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_SNVS | + ROHM_DVS_LEVEL_SUSPEND | ROHM_DVS_LEVEL_LPSR, + .run_reg = BD71815_REG_BUCK5_VOLT, + .run_mask = BD71815_VOLT_MASK, + .run_on_mask = BD71815_BUCK_RUN_ON, + .snvs_on_mask = BD71815_BUCK_SNVS_ON, + .suspend_on_mask = BD71815_BUCK_SUSP_ON, + .lpsr_on_mask = BD71815_BUCK_LPSR_ON, +}; + +static int set_hw_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct bd71815_regulator *data; + + data = container_of(desc, struct bd71815_regulator, desc); + return rohm_regulator_set_dvs_levels(data->dvs, np, desc, cfg->regmap); +} + +/* + * Bucks 1 and 2 have two voltage selection registers where selected + * voltage can be set. Which of the registers is used can be either controlled + * by a control bit in register - or by HW state. If HW state specific voltages + * are given - then we assume HW state based control should be used. + * + * If volatge value is updated to currently selected register - then output + * voltage is immediately changed no matter what is set as ramp rate. Thus we + * default changing voltage by writing new value to inactive register and + * then updating the 'register selection' bit. This naturally only works when + * HW state machine is not used to select the voltage. + */ +static int buck12_set_hw_dvs_levels(struct device_node *np, + const struct regulator_desc *desc, + struct regulator_config *cfg) +{ + struct bd71815_regulator *data; + int ret = 0, val; + + data = container_of(desc, struct bd71815_regulator, desc); + + if (of_find_property(np, "rohm,dvs-run-voltage", NULL) || + of_find_property(np, "rohm,dvs-suspend-voltage", NULL) || + of_find_property(np, "rohm,dvs-lpsr-voltage", NULL) || + of_find_property(np, "rohm,dvs-snvs-voltage", NULL)) { + ret = regmap_read(cfg->regmap, desc->vsel_reg, &val); + if (ret) + return ret; + + if (!(BD71815_BUCK_STBY_DVS & val) && + !(BD71815_BUCK_DVSSEL & val)) { + int val2; + + /* + * We are currently using voltage from _L. + * We'd better copy it to _H and switch to it to + * avoid shutting us down if LPSR or SUSPEND is set to + * disabled. _L value is at reg _H + 1 + */ + ret = regmap_read(cfg->regmap, desc->vsel_reg + 1, + &val2); + if (ret) + return ret; + + ret = regmap_update_bits(cfg->regmap, desc->vsel_reg, + BD71815_VOLT_MASK | + BD71815_BUCK_DVSSEL, + val2 | BD71815_BUCK_DVSSEL); + if (ret) + return ret; + } + ret = rohm_regulator_set_dvs_levels(data->dvs, np, desc, + cfg->regmap); + if (ret) + return ret; + /* + * DVS levels were given => use HW-state machine for voltage + * controls. NOTE: AFAIK, This means that if voltage is changed + * by SW the ramp-rate is not respected. Should we disable + * SW voltage control when the HW state machine is used? + */ + ret = regmap_update_bits(cfg->regmap, desc->vsel_reg, + BD71815_BUCK_STBY_DVS, + BD71815_BUCK_STBY_DVS); + } + + return ret; +} + +/* + * BUCK1/2 + * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting + * 00: 10.00mV/usec 10mV 1uS + * 01: 5.00mV/usec 10mV 2uS + * 10: 2.50mV/usec 10mV 4uS + * 11: 1.25mV/usec 10mV 8uS + */ +static int bd7181x_buck12_set_ramp_delay(struct regulator_dev *rdev, + int ramp_delay) +{ + struct bd71815_pmic *pmic = rdev_get_drvdata(rdev); + int id = rdev->desc->id; + unsigned int ramp_value = BD71815_BUCK_RAMPRATE_10P00MV; + + switch (ramp_delay) { + case 1 ... 1250: + ramp_value = BD71815_BUCK_RAMPRATE_1P25MV; + break; + case 1251 ... 2500: + ramp_value = BD71815_BUCK_RAMPRATE_2P50MV; + break; + case 2501 ... 5000: + ramp_value = BD71815_BUCK_RAMPRATE_5P00MV; + break; + case 5001 ... 10000: + ramp_value = BD71815_BUCK_RAMPRATE_10P00MV; + break; + default: + ramp_value = BD71815_BUCK_RAMPRATE_10P00MV; + dev_err(pmic->dev, + "%s: ramp_delay: %d not supported, setting 10000mV//us\n", + rdev->desc->name, ramp_delay); + } + + return regmap_update_bits(pmic->regmap, BD71815_REG_BUCK1_MODE + id*0x1, + BD71815_BUCK_RAMPRATE_MASK, ramp_value << 6); +} + +static int bd7181x_led_set_current_limit(struct regulator_dev *rdev, + int min_uA, int max_uA) +{ + int ret; + int onstatus; + + onstatus = regulator_is_enabled_regmap(rdev); + + ret = regulator_set_current_limit_regmap(rdev, min_uA, max_uA); + if (!ret) { + int newstatus; + + newstatus = regulator_is_enabled_regmap(rdev); + if (onstatus != newstatus) { + /* + * HW FIX: spurious led status change detected. Toggle + * state as a workaround + */ + if (onstatus) + ret = regulator_enable_regmap(rdev); + else + ret = regulator_disable_regmap(rdev); + + if (ret) + dev_err(rdev_get_dev(rdev), + "LED status error\n"); + } + } + return ret; +} + +static int bd7181x_buck12_get_voltage_sel(struct regulator_dev *rdev) +{ + struct bd71815_pmic *pmic = rdev_get_drvdata(rdev); + int rid = rdev_get_id(rdev); + int ret, regh, regl, val; + + regh = BD71815_REG_BUCK1_VOLT_H + rid * 0x2; + regl = BD71815_REG_BUCK1_VOLT_L + rid * 0x2; + + ret = regmap_read(pmic->regmap, regh, &val); + if (ret) + return ret; + + /* + * If we use HW state machine based voltage reg selection - then we + * return BD71815_REG_BUCK1_VOLT_H which is used at RUN. + * Else we do return the BD71815_REG_BUCK1_VOLT_H or + * BD71815_REG_BUCK1_VOLT_L depending on which is selected to be used + * by BD71815_BUCK_DVSSEL bit + */ + if ((!(val & BD71815_BUCK_STBY_DVS)) && (!(val & BD71815_BUCK_DVSSEL))) + ret = regmap_read(pmic->regmap, regl, &val); + + if (ret) + return ret; + + return val & BD71815_VOLT_MASK; +} + +/* + * For Buck 1/2. + */ +static int bd7181x_buck12_set_voltage_sel(struct regulator_dev *rdev, + unsigned int sel) +{ + struct bd71815_pmic *pmic = rdev_get_drvdata(rdev); + int rid = rdev_get_id(rdev); + int ret, val, reg, regh, regl; + + regh = BD71815_REG_BUCK1_VOLT_H + rid*0x2; + regl = BD71815_REG_BUCK1_VOLT_L + rid*0x2; + + ret = regmap_read(pmic->regmap, regh, &val); + if (ret) + return ret; + + /* + * If bucks 1 & 2 are controlled by state machine - then the RUN state + * voltage is set to BD71815_REG_BUCK1_VOLT_H. Changing SUSPEND/LPSR + * voltages at runtime is not supported by this driver. + */ + if (((val & BD71815_BUCK_STBY_DVS))) { + return regmap_update_bits(pmic->regmap, regh, BD71815_VOLT_MASK, + sel); + } + /* Update new voltage to the register which is not selected now */ + if (val & BD71815_BUCK_DVSSEL) + reg = regl; + else + reg = regh; + + ret = regmap_update_bits(pmic->regmap, reg, BD71815_VOLT_MASK, sel); + if (ret) + return ret; + + /* Select the other DVS register to be used */ + return regmap_update_bits(pmic->regmap, regh, BD71815_BUCK_DVSSEL, ~val); +} + +static const struct regulator_ops bd7181x_ldo_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops bd7181x_fixed_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, +}; + +static const struct regulator_ops bd7181x_buck_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +static const struct regulator_ops bd7181x_buck12_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = bd7181x_buck12_set_voltage_sel, + .get_voltage_sel = bd7181x_buck12_get_voltage_sel, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .set_ramp_delay = bd7181x_buck12_set_ramp_delay, +}; + +static const struct regulator_ops bd7181x_led_regulator_ops = { + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .set_current_limit = bd7181x_led_set_current_limit, + .get_current_limit = regulator_get_current_limit_regmap, +}; + +#define BD71815_FIXED_REG(_name, _id, ereg, emsk, voltage, _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = 1, \ + .ops = &bd7181x_fixed_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (voltage), \ + .enable_reg = (ereg), \ + .enable_mask = (emsk), \ + .of_parse_cb = set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +#define BD71815_BUCK_REG(_name, _id, vsel, ereg, min, max, step, _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &bd7181x_buck_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (vsel), \ + .vsel_mask = BD71815_VOLT_MASK, \ + .enable_reg = (ereg), \ + .enable_mask = BD71815_BUCK_RUN_ON, \ + .of_parse_cb = set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +#define BD71815_BUCK12_REG(_name, _id, vsel, ereg, min, max, step, \ + _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &bd7181x_buck12_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (vsel), \ + .vsel_mask = 0x3f, \ + .enable_reg = (ereg), \ + .enable_mask = 0x04, \ + .of_parse_cb = buck12_set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +#define BD71815_LED_REG(_name, _id, csel, mask, ereg, emsk, currents) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_current_limits = ARRAY_SIZE(currents), \ + .ops = &bd7181x_led_regulator_ops, \ + .type = REGULATOR_CURRENT, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .curr_table = currents, \ + .csel_reg = (csel), \ + .csel_mask = (mask), \ + .enable_reg = (ereg), \ + .enable_mask = (emsk), \ + }, \ + } + +#define BD71815_LDO_REG(_name, _id, vsel, ereg, emsk, min, max, step, \ + _dvs) \ + [(_id)] = { \ + .desc = { \ + .name = #_name, \ + .of_match = of_match_ptr(#_name), \ + .regulators_node = of_match_ptr("regulators"), \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &bd7181x_ldo_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = (_id), \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (vsel), \ + .vsel_mask = BD71815_VOLT_MASK, \ + .enable_reg = (ereg), \ + .enable_mask = (emsk), \ + .of_parse_cb = set_hw_dvs_levels, \ + }, \ + .dvs = (_dvs), \ + } + +static struct bd71815_regulator bd71815_regulators[] = { + BD71815_BUCK12_REG(buck1, BD71815_BUCK1, BD71815_REG_BUCK1_VOLT_H, + BD71815_REG_BUCK1_MODE, 800000, 2000000, 25000, + &buck1_dvs), + BD71815_BUCK12_REG(buck2, BD71815_BUCK2, BD71815_REG_BUCK2_VOLT_H, + BD71815_REG_BUCK2_MODE, 800000, 2000000, 25000, + &buck2_dvs), + BD71815_BUCK_REG(buck3, BD71815_BUCK3, BD71815_REG_BUCK3_VOLT, + BD71815_REG_BUCK3_MODE, 1200000, 2700000, 50000, + &buck3_dvs), + BD71815_BUCK_REG(buck4, BD71815_BUCK4, BD71815_REG_BUCK4_VOLT, + BD71815_REG_BUCK4_MODE, 1100000, 1850000, 25000, + &buck4_dvs), + BD71815_BUCK_REG(buck5, BD71815_BUCK5, BD71815_REG_BUCK5_VOLT, + BD71815_REG_BUCK5_MODE, 1800000, 3300000, 50000, + &buck5_dvs), + BD71815_LDO_REG(ldo1, BD71815_LDO1, BD71815_REG_LDO1_VOLT, + BD71815_REG_LDO_MODE1, LDO1_RUN_ON, 800000, 3300000, + 50000, &ldo1_dvs), + BD71815_LDO_REG(ldo2, BD71815_LDO2, BD71815_REG_LDO2_VOLT, + BD71815_REG_LDO_MODE2, LDO2_RUN_ON, 800000, 3300000, + 50000, &ldo2_dvs), + /* + * Let's default LDO3 to be enabled by SW. We can override ops if DT + * says LDO3 should be enabled by HW when DCIN is connected. + */ + BD71815_LDO_REG(ldo3, BD71815_LDO3, BD71815_REG_LDO3_VOLT, + BD71815_REG_LDO_MODE2, LDO3_RUN_ON, 800000, 3300000, + 50000, &ldo3_dvs), + BD71815_LDO_REG(ldo4, BD71815_LDO4, BD71815_REG_LDO4_VOLT, + BD71815_REG_LDO_MODE3, LDO4_RUN_ON, 800000, 3300000, + 50000, &ldo4_dvs), + BD71815_LDO_REG(ldo5, BD71815_LDO5, BD71815_REG_LDO5_VOLT_H, + BD71815_REG_LDO_MODE3, LDO5_RUN_ON, 800000, 3300000, + 50000, &ldo5_dvs), + BD71815_FIXED_REG(ldodvref, BD71815_LDODVREF, BD71815_REG_LDO_MODE4, + DVREF_RUN_ON, 3000000, &dvref_dvs), + BD71815_FIXED_REG(ldolpsr, BD71815_LDOLPSR, BD71815_REG_LDO_MODE4, + LDO_LPSR_RUN_ON, 1800000, &ldolpsr_dvs), + BD71815_LED_REG(wled, BD71815_WLED, BD71815_REG_LED_DIMM, LED_DIMM_MASK, + BD71815_REG_LED_CTRL, LED_RUN_ON, + bd7181x_wled_currents), +}; + +static int bd7181x_probe(struct platform_device *pdev) +{ + struct bd71815_pmic *pmic; + struct regulator_config config = {}; + int i, ret; + struct gpio_desc *ldo4_en; + + pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + memcpy(pmic->descs, bd71815_regulators, sizeof(pmic->descs)); + + pmic->dev = &pdev->dev; + pmic->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!pmic->regmap) { + dev_err(pmic->dev, "No parent regmap\n"); + return -ENODEV; + } + platform_set_drvdata(pdev, pmic); + ldo4_en = devm_gpiod_get_from_of_node(&pdev->dev, + pdev->dev.parent->of_node, + "rohm,vsel-gpios", 0, + GPIOD_ASIS, "ldo4-en"); + + if (IS_ERR(ldo4_en)) { + ret = PTR_ERR(ldo4_en); + if (ret != -ENOENT) + return ret; + ldo4_en = NULL; + } + + /* Disable to go to ship-mode */ + ret = regmap_update_bits(pmic->regmap, BD71815_REG_PWRCTRL, + RESTARTEN, 0); + if (ret) + return ret; + + config.dev = pdev->dev.parent; + config.regmap = pmic->regmap; + + for (i = 0; i < BD71815_REGULATOR_CNT; i++) { + struct regulator_desc *desc; + struct regulator_dev *rdev; + + desc = &pmic->descs[i].desc; + if (i == BD71815_LDO4) + config.ena_gpiod = ldo4_en; + + config.driver_data = pmic; + + rdev = devm_regulator_register(&pdev->dev, desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "failed to register %s regulator\n", + desc->name); + return PTR_ERR(rdev); + } + config.ena_gpiod = NULL; + pmic->rdev[i] = rdev; + } + return 0; +} + +static const struct platform_device_id bd7181x_pmic_id[] = { + { "bd71815-pmic", ROHM_CHIP_TYPE_BD71815 }, + { }, +}; +MODULE_DEVICE_TABLE(platform, bd7181x_pmic_id); + +static struct platform_driver bd7181x_regulator = { + .driver = { + .name = "bd7181x-pmic", + .owner = THIS_MODULE, + }, + .probe = bd7181x_probe, + .id_table = bd7181x_pmic_id, +}; +module_platform_driver(bd7181x_regulator); + +MODULE_AUTHOR("Tony Luo "); +MODULE_DESCRIPTION("BD71815 voltage regulator driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:bd7181x-pmic");