Message ID | 20170404123010.11722-5-ard.biesheuvel@linaro.org |
---|---|
State | Superseded |
Headers | show |
Series | Juno cleanup -- EDK2 edition | expand |
On Tue, Apr 04, 2017 at 01:30:08PM +0100, Ard Biesheuvel wrote: > The ArmJunoDxe driver code registers a callback for the EndOfDxe event, > at which time it does some manipulation of the PCI peripherals on the > board. Given that R0 has no working PCIe, we can omit the registration > of the callback altogether. This is a nice simplification. However, could the final sentence of the commit message be changed to " Given that R0 has no working PCIe, instead of conditionally performing these operations, omit the registration of the callback altogether on that platform. " With that: Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> > > Contributed-under: TianoCore Contribution Agreement 1.0 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c | 43 +++++++++----------- > 1 file changed, 19 insertions(+), 24 deletions(-) > > diff --git a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c > index 14ff189a3078..f7e33961b4e7 100644 > --- a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c > +++ b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c > @@ -379,7 +379,6 @@ OnEndOfDxe ( > EFI_DEVICE_PATH_PROTOCOL* PciRootComplexDevicePath; > EFI_HANDLE Handle; > EFI_STATUS Status; > - UINT32 JunoRevision; > > // > // PCI Root Complex initialization > @@ -395,13 +394,9 @@ OnEndOfDxe ( > Status = gBS->ConnectController (Handle, NULL, PciRootComplexDevicePath, FALSE); > ASSERT_EFI_ERROR (Status); > > - GetJunoRevision (JunoRevision); > - > - if (JunoRevision != JUNO_REVISION_R0) { > - Status = ArmJunoSetNicMacAddress (); > - if (EFI_ERROR (Status)) { > - DEBUG ((DEBUG_ERROR, "ArmJunoDxe: Failed to set Marvell Yukon NIC MAC address\n")); > - } > + Status = ArmJunoSetNicMacAddress (); > + if (EFI_ERROR (Status)) { > + DEBUG ((DEBUG_ERROR, "ArmJunoDxe: Failed to set Marvell Yukon NIC MAC address\n")); > } > } > > @@ -511,22 +506,6 @@ ArmJunoEntryPoint ( > } > } > > - // > - // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group. > - // The "OnEndOfDxe()" function is declared as the call back function. > - // It will be called at the end of the DXE phase when an event of the > - // same group is signalled to inform about the end of the DXE phase. > - // Install the INSTALL_FDT_PROTOCOL protocol. > - // > - Status = gBS->CreateEventEx ( > - EVT_NOTIFY_SIGNAL, > - TPL_CALLBACK, > - OnEndOfDxe, > - NULL, > - &gEfiEndOfDxeEventGroupGuid, > - &EndOfDxeEvent > - ); > - > // Install dynamic Shell command to run baremetal binaries. > Status = ShellDynCmdRunAxfInstall (ImageHandle); > if (EFI_ERROR (Status)) { > @@ -555,6 +534,22 @@ ArmJunoEntryPoint ( > // Enable PCI enumeration > PcdSetBool (PcdPciDisableBusEnumeration, FALSE); > > + // > + // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group. > + // The "OnEndOfDxe()" function is declared as the call back function. > + // It will be called at the end of the DXE phase when an event of the > + // same group is signalled to inform about the end of the DXE phase. > + // Install the INSTALL_FDT_PROTOCOL protocol. > + // > + Status = gBS->CreateEventEx ( > + EVT_NOTIFY_SIGNAL, > + TPL_CALLBACK, > + OnEndOfDxe, > + NULL, > + &gEfiEndOfDxeEventGroupGuid, > + &EndOfDxeEvent > + ); > + > // Declare the related ACPI Tables > EfiCreateProtocolNotifyEvent ( > &gEfiAcpiTableProtocolGuid, > -- > 2.9.3 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c index 14ff189a3078..f7e33961b4e7 100644 --- a/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c +++ b/ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c @@ -379,7 +379,6 @@ OnEndOfDxe ( EFI_DEVICE_PATH_PROTOCOL* PciRootComplexDevicePath; EFI_HANDLE Handle; EFI_STATUS Status; - UINT32 JunoRevision; // // PCI Root Complex initialization @@ -395,13 +394,9 @@ OnEndOfDxe ( Status = gBS->ConnectController (Handle, NULL, PciRootComplexDevicePath, FALSE); ASSERT_EFI_ERROR (Status); - GetJunoRevision (JunoRevision); - - if (JunoRevision != JUNO_REVISION_R0) { - Status = ArmJunoSetNicMacAddress (); - if (EFI_ERROR (Status)) { - DEBUG ((DEBUG_ERROR, "ArmJunoDxe: Failed to set Marvell Yukon NIC MAC address\n")); - } + Status = ArmJunoSetNicMacAddress (); + if (EFI_ERROR (Status)) { + DEBUG ((DEBUG_ERROR, "ArmJunoDxe: Failed to set Marvell Yukon NIC MAC address\n")); } } @@ -511,22 +506,6 @@ ArmJunoEntryPoint ( } } - // - // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group. - // The "OnEndOfDxe()" function is declared as the call back function. - // It will be called at the end of the DXE phase when an event of the - // same group is signalled to inform about the end of the DXE phase. - // Install the INSTALL_FDT_PROTOCOL protocol. - // - Status = gBS->CreateEventEx ( - EVT_NOTIFY_SIGNAL, - TPL_CALLBACK, - OnEndOfDxe, - NULL, - &gEfiEndOfDxeEventGroupGuid, - &EndOfDxeEvent - ); - // Install dynamic Shell command to run baremetal binaries. Status = ShellDynCmdRunAxfInstall (ImageHandle); if (EFI_ERROR (Status)) { @@ -555,6 +534,22 @@ ArmJunoEntryPoint ( // Enable PCI enumeration PcdSetBool (PcdPciDisableBusEnumeration, FALSE); + // + // Create an event belonging to the "gEfiEndOfDxeEventGroupGuid" group. + // The "OnEndOfDxe()" function is declared as the call back function. + // It will be called at the end of the DXE phase when an event of the + // same group is signalled to inform about the end of the DXE phase. + // Install the INSTALL_FDT_PROTOCOL protocol. + // + Status = gBS->CreateEventEx ( + EVT_NOTIFY_SIGNAL, + TPL_CALLBACK, + OnEndOfDxe, + NULL, + &gEfiEndOfDxeEventGroupGuid, + &EndOfDxeEvent + ); + // Declare the related ACPI Tables EfiCreateProtocolNotifyEvent ( &gEfiAcpiTableProtocolGuid,
The ArmJunoDxe driver code registers a callback for the EndOfDxe event, at which time it does some manipulation of the PCI peripherals on the board. Given that R0 has no working PCIe, we can omit the registration of the callback altogether. Contributed-under: TianoCore Contribution Agreement 1.0 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- ArmPlatformPkg/ArmJunoPkg/Drivers/ArmJunoDxe/ArmJunoDxe.c | 43 +++++++++----------- 1 file changed, 19 insertions(+), 24 deletions(-) -- 2.9.3 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel