From patchwork Wed Mar 21 01:03:17 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: gary guo X-Patchwork-Id: 132164 Delivered-To: patch@linaro.org Received: by 10.46.84.29 with SMTP id i29csp1539322ljb; Tue, 20 Mar 2018 18:04:27 -0700 (PDT) X-Google-Smtp-Source: AG47ELtpJoy4kmRQL6twZk5vQ971qN3l0M+40E3/fy8lGgtyaryMY7gCCk8TQyEyAIVuHlaleQRR X-Received: by 2002:a17:902:8601:: with SMTP id f1-v6mr18699695plo.379.1521594267004; Tue, 20 Mar 2018 18:04:27 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1521594267; cv=none; d=google.com; s=arc-20160816; b=TmLWIOaMf+FgcHIRpaqHtMu2r65MXDOgYWpybR+JCRQOQJ5oquGjykUhkb/ddqQ99C oaufdzzVj44rFIZmJl9AG5EsPT5LBPykpmofcdhzSdpG+Gshg8gEgAr0kkfzNUxHA7zE MePlcVu6lEg+Am1wy6p6YVKFRbdYja3qQM4DPfM9fE7QIRrr+SIl3g9fCKNYX+dBj7oC ChfpyOjs8FHxtgAUPoF3tdqSZkQ/mEQtXKRCWqYApPdQd7fRMImMHAIjs+bsP9UnxO9f 0Go1OPdYeluCxGykMesPniNrf3uyaEWNy+fPpBeJ4+fsoJ/Zx2Vucg8vwcIW0NO5c5D6 JmXA== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:content-transfer-encoding:mime-version:cc :list-subscribe:list-help:list-post:list-archive:list-unsubscribe :list-id:precedence:subject:references:in-reply-to:message-id:date :to:from:dkim-signature:delivered-to:arc-authentication-results; bh=b2J/2+XSwlyIPIjJKwA/KZPP+8WP3/5FobyNYVDvVy0=; b=jTfHdg0tTDaXbdykqsR1OAbbG+G5LcnQKWyOQUwe41NSptt11znm08RYRZwULudPVQ j9n4kv5sZmVqBy+Hi1MwfDy9SmZuHJ+Ytank1LCjo1DidXvCMWZ5LusuHi2JmXzRsc1p kOBWSgZNY9nW4wJgRAKYkvzHhUWpRmJpHPXB7hxMMj2IJXRtQYODm12vowabfgX5g3pu JT/W7NxtGKLY/8Hu9LjCMVLmccTwB85Mmw1dG6cMpiEhsRt3UP+NzNKyrFya71SaT9Ir OhAPeZoax/1roguf+b3ms3jSnuealkfiN6vq3Z65glC8dz4ffPeFHCgEk7Q0EZyLkJCK U7IQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=Wg1v7DwT; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 2001:19d0:306:5::1 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from ml01.01.org (ml01.01.org. [2001:19d0:306:5::1]) by mx.google.com with ESMTPS id n3-v6si2922597pld.85.2018.03.20.18.04.26 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Tue, 20 Mar 2018 18:04:26 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 2001:19d0:306:5::1 as permitted sender) client-ip=2001:19d0:306:5::1; Authentication-Results: mx.google.com; dkim=neutral (body hash did not verify) header.i=@linaro.org header.s=google header.b=Wg1v7DwT; spf=pass (google.com: best guess record for domain of edk2-devel-bounces@lists.01.org designates 2001:19d0:306:5::1 as permitted sender) smtp.mailfrom=edk2-devel-bounces@lists.01.org; dmarc=fail (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from [127.0.0.1] (localhost [IPv6:::1]) by ml01.01.org (Postfix) with ESMTP id 6EA89225E964A; Tue, 20 Mar 2018 17:57:48 -0700 (PDT) X-Original-To: edk2-devel@lists.01.org Delivered-To: edk2-devel@lists.01.org Received-SPF: Pass (sender SPF authorized) identity=mailfrom; client-ip=2607:f8b0:400e:c05::232; helo=mail-pg0-x232.google.com; envelope-from=heyi.guo@linaro.org; receiver=edk2-devel@lists.01.org Received: from mail-pg0-x232.google.com (mail-pg0-x232.google.com [IPv6:2607:f8b0:400e:c05::232]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by ml01.01.org (Postfix) with ESMTPS id D2E90225E9648 for ; Tue, 20 Mar 2018 17:57:46 -0700 (PDT) Received: by mail-pg0-x232.google.com with SMTP id l4so1340770pgp.11 for ; Tue, 20 Mar 2018 18:04:17 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=usPTMVEC96qmApuNs2s/oZ/ZHDXIpxEpr4BJeM85O48=; b=Wg1v7DwTZCL6YtQSasIEMXykGXc3/LCiruoeAEDzpY+xqNlFt9i5w15HHFha0SGoMu yka9PjN4k7msHRN5pVnuHuI5iyV+Ynbe0ik3LNPWw4B4NPx2FdbU4F6tMqMU4Lebi1kE gChSL6C0BmU12+a5Q9jokH3XqmqWMgOWftrXU= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=usPTMVEC96qmApuNs2s/oZ/ZHDXIpxEpr4BJeM85O48=; b=fvvtaL354AtAhmOZo1kqk/kDoKaJAAGID0gYQ1fiAvas4fNg3+7umTc87Ty70V+faW h8c0N8VKq6t3G5z0n+f6S/p6VI0xL6QJf65JW6QTvx1EjFMs+rDm5ONUcC6vM22sm5Qi 7YeZZSXKJCWMR8754S5/o5Pd4sTpRzf9zpYMUrAOB+lNhHYWye1hpmDq8UV9nPaNnhxW C0uDAF1dc5vpgE2rZ5WUxBVU7cwDuOTkv9PKlmUOU5s029wKIt7MTptF5G2SwNYc8R+G bt8zPIp5OzpUDU9bRqoVfw03yNz24w65AonH1HOqaw5qdZorsSdVP60/Vy441So4qb/5 u72g== X-Gm-Message-State: AElRT7HLn6ycyGdr/RoSZSeE2hEznWFIlyxh5Qy+C/bvrccxLotjIQH/ 7egviPmE3bc0xCq50zSEn9IAYa7CrqU= X-Received: by 10.98.103.69 with SMTP id b66mr15187828pfc.151.1521594256100; Tue, 20 Mar 2018 18:04:16 -0700 (PDT) Received: from localhost.localdomain ([45.56.152.100]) by smtp.gmail.com with ESMTPSA id 184sm5702491pfg.124.2018.03.20.18.04.13 (version=TLS1_2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Tue, 20 Mar 2018 18:04:15 -0700 (PDT) From: Heyi Guo To: edk2-devel@lists.01.org Date: Wed, 21 Mar 2018 09:03:17 +0800 Message-Id: <1521594198-52523-12-git-send-email-heyi.guo@linaro.org> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1521594198-52523-1-git-send-email-heyi.guo@linaro.org> References: <1521594198-52523-1-git-send-email-heyi.guo@linaro.org> Subject: [edk2] [PATCH edk2-platforms 11/12] Hisilicon: remove platform specific PciHostBridge X-BeenThere: edk2-devel@lists.01.org X-Mailman-Version: 2.1.23 Precedence: list List-Id: EDK II Development List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: Michael D Kinney , Heyi Guo , Yi Li , Leif Lindholm , Ard Biesheuvel MIME-Version: 1.0 Errors-To: edk2-devel-bounces@lists.01.org Sender: "edk2-devel" PciHostBridge in Silicon/Hisilicon is specific for D03/D05. After we switch to generic PciHostBridge in MdeModulePkg, this driver is useless and can be removed. Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Heyi Guo Signed-off-by: Yi Li Cc: Ard Biesheuvel Cc: Leif Lindholm Cc: Michael D Kinney --- Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf | 74 - Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h | 520 ----- Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c | 1658 --------------- Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c | 2220 -------------------- 4 files changed, 4472 deletions(-) -- 2.7.4 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel Reviewed-by: Ard Biesheuvel diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf deleted file mode 100644 index 7f5e1751ec9f..000000000000 --- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridgeDxe.inf +++ /dev/null @@ -1,74 +0,0 @@ -## @file -# -# Component description file PCI Host Bridge driver. -# Copyright (c) 2014, AppliedMicro Corp. All rights reserved. -# Copyright (c) 2016, Hisilicon Limited. All rights reserved. -# Copyright (c) 2016, Linaro Limited. All rights reserved. -# -# This program and the accompanying materials -# are licensed and made available under the terms and conditions of the BSD License -# which accompanies this distribution. The full text of the license may be found at -# http://opensource.org/licenses/bsd-license.php -# -# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, -# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. -## - -[Defines] - INF_VERSION = 0x00010005 - BASE_NAME = PciHostBridge - FILE_GUID = B0E61270-263F-11E3-8224-0800200C9A66 - MODULE_TYPE = DXE_DRIVER - VERSION_STRING = 1.0 - - ENTRY_POINT = InitializePciHostBridge - -[Packages] - MdePkg/MdePkg.dec - ArmPkg/ArmPkg.dec - ArmPlatformPkg/ArmPlatformPkg.dec - EmbeddedPkg/EmbeddedPkg.dec - Silicon/Hisilicon/HisiPkg.dec - -[LibraryClasses] - UefiDriverEntryPoint - UefiBootServicesTableLib - MemoryAllocationLib - DxeServicesTableLib - CacheMaintenanceLib - DmaLib - BaseMemoryLib - BaseLib - DebugLib - TimerLib - ArmLib - DevicePathLib - PcdLib - OemMiscLib - -[Sources] - PciHostBridge.c - PciRootBridgeIo.c - PciHostBridge.h - -[Protocols] - gEfiPciHostBridgeResourceAllocationProtocolGuid - gEfiPciRootBridgeIoProtocolGuid - gEfiMetronomeArchProtocolGuid - gEfiDevicePathProtocolGuid - gEmbeddedGpioProtocolGuid - -[depex] - gEfiMetronomeArchProtocolGuid - -[FeaturePcd] - -[Pcd] - -[FixedPcd] - gHisiTokenSpaceGuid.PcdPcieRootBridgeMask - gHisiTokenSpaceGuid.PcdPcieRootBridgeMask2P - gHisiTokenSpaceGuid.Pcdsoctype - -[Guids] - gEfiEventExitBootServicesGuid ## PRODUCES ## Event diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h deleted file mode 100644 index 435385491a17..000000000000 --- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.h +++ /dev/null @@ -1,520 +0,0 @@ -/** - * Copyright (c) 2014, AppliedMicro Corp. All rights reserved. - * Copyright (c) 2016, Hisilicon Limited. All rights reserved. - * Copyright (c) 2016, Linaro Limited. All rights reserved. - * - * This program and the accompanying materials - * are licensed and made available under the terms and conditions of the BSD License - * which accompanies this distribution. The full text of the license may be found at - * http://opensource.org/licenses/bsd-license.php - * - * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - * - **/ - -#ifndef _PCI_HOST_BRIDGE_H_ -#define _PCI_HOST_BRIDGE_H_ - -#include - -#include -#include - -#include -#include -#include -#include -#include -#include - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -// Enable below statments to enable PCIE debug -//#define PCIE_DEBUG_ENABLE -//#define PCIE_VDEBUG_ENABLE -//#define PCIE_CDEBUG_ENABLE - -#ifdef PCIE_CDEBUG_ENABLE -# define PCIE_CSR_DEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg)) -#else -# define PCIE_CSR_DEBUG(arg...) -#endif - -#ifdef PCIE_VDEBUG_ENABLE -# define PCIE_VDEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg)) -#else -# define PCIE_VDEBUG(arg...) -#endif - -#ifdef PCIE_DEBUG_ENABLE -# define PCIE_DEBUG(arg...) DEBUG((EFI_D_VERBOSE,## arg)) -#else -# define PCIE_DEBUG(arg...) -#endif -#define PCIE_WARN(arg...) DEBUG((EFI_D_WARN,## arg)) -#define PCIE_ERR(arg...) DEBUG((EFI_D_ERROR,## arg)) -#define PCIE_INFO(arg...) DEBUG((EFI_D_INFO,## arg)) - -#define MAX_PCI_DEVICE_NUMBER 31 -#define MAX_PCI_FUNCTION_NUMBER 7 -#define MAX_PCI_REG_ADDRESS 0xFFFF - -typedef enum { - IoOperation, - MemOperation, - PciOperation -} OPERATION_TYPE; - -#define PCI_HOST_BRIDGE_SIGNATURE SIGNATURE_32('e', 'h', 's', 't') -typedef struct { - UINTN Signature; - EFI_HANDLE HostBridgeHandle; - UINTN RootBridgeNumber; - LIST_ENTRY Head; - BOOLEAN ResourceSubmited; - BOOLEAN CanRestarted; - EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL ResAlloc; -} PCI_HOST_BRIDGE_INSTANCE; - -#define INSTANCE_FROM_RESOURCE_ALLOCATION_THIS(a) \ - CR(a, PCI_HOST_BRIDGE_INSTANCE, ResAlloc, PCI_HOST_BRIDGE_SIGNATURE) - -// -// HostBridge Resource Allocation interface -// - -/** - These are the notifications from the PCI bus driver that it is about to enter a certain - phase of the PCI enumeration process. - - This member function can be used to notify the host bridge driver to perform specific actions, - including any chipset-specific initialization, so that the chipset is ready to enter the next phase. - Eight notification points are defined at this time. See belows: - EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data - structures. The PCI enumerator should issue this notification - before starting a fresh enumeration process. Enumeration cannot - be restarted after sending any other notification such as - EfiPciHostBridgeBeginBusAllocation. - EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is - required here. This notification can be used to perform any - chipset-specific programming. - EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No - specific action is required here. This notification can be used to - perform any chipset-specific programming. - EfiPciHostBridgeBeginResourceAllocation - The resource allocation phase is about to begin. No specific - action is required here. This notification can be used to perform - any chipset-specific programming. - EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI - root bridges. These resource settings are returned on the next call to - GetProposedResources(). Before calling NotifyPhase() with a Phase of - EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible - for gathering I/O and memory requests for - all the PCI root bridges and submitting these requests using - SubmitResources(). This function pads the resource amount - to suit the root bridge hardware, takes care of dependencies between - the PCI root bridges, and calls the Global Coherency Domain (GCD) - with the allocation request. In the case of padding, the allocated range - could be bigger than what was requested. - EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated - resources (proposed resources) for all the PCI root bridges. After the - hardware is programmed, reassigning resources will not be supported. - The bus settings are not affected. - EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI - root bridges and resets the I/O and memory apertures to their initial - state. The bus settings are not affected. If the request to allocate - resources fails, the PCI enumerator can use this notification to - deallocate previous resources, adjust the requests, and retry - allocation. - EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is - required here. This notification can be used to perform any chipsetspecific - programming. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] Phase The phase during enumeration - - @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error - is valid for a Phase of EfiPciHostBridgeAllocateResources if - SubmitResources() has not been called for one or more - PCI root bridges before this call - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid - for a Phase of EfiPciHostBridgeSetResources. - @retval EFI_INVALID_PARAMETER Invalid phase parameter - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the - previously submitted resource requests cannot be fulfilled or - were only partially fulfilled. - @retval EFI_SUCCESS The notification was accepted without any errors. - -**/ -EFI_STATUS -EFIAPI -NotifyPhase( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase - ); - -/** - Return the device handle of the next PCI root bridge that is associated with this Host Bridge. - - This function is called multiple times to retrieve the device handles of all the PCI root bridges that - are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI - root bridges. On each call, the handle that was returned by the previous call is passed into the - interface, and on output the interface returns the device handle of the next PCI root bridge. The - caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - for that root bridge. When there are no more PCI root bridges to report, the interface returns - EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they - are returned by this function. - For D945 implementation, there is only one root bridge in PCI host bridge. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge. - - @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the - specific Host bridge and return EFI_SUCCESS. - @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was - returned on a previous call to GetNextRootBridge(). -**/ -EFI_STATUS -EFIAPI -GetNextRootBridge( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN OUT EFI_HANDLE *RootBridgeHandle - ); - -/** - Returns the allocation attributes of a PCI root bridge. - - The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary - from one PCI root bridge to another. These attributes are different from the decode-related - attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The - RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device - handles of all the root bridges that are associated with this host bridge must be obtained by calling - GetNextRootBridge(). The attributes are static in the sense that they do not change during or - after the enumeration process. The hardware may provide mechanisms to change the attributes on - the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is - installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in - "Related Definitions" below. The caller uses these attributes to combine multiple resource requests. - For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to - include requests for the prefetchable memory in the nonprefetchable memory pool and not request any - prefetchable memory. - Attribute Description - ------------------------------------ ---------------------------------------------------------------------- - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate - windows for nonprefetchable and prefetchable memory. A PCI bus - driver needs to include requests for prefetchable memory in the - nonprefetchable memory pool. - - EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory - windows. If this bit is not set, the PCI bus driver needs to include - requests for a 64-bit memory address in the corresponding 32-bit - memory pool. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type - EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Attributes The pointer to attribte of root bridge, it is output parameter - - @retval EFI_INVALID_PARAMETER Attribute pointer is NULL - @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid. - @retval EFI_SUCCESS Success to get attribute of interested root bridge. - -**/ -EFI_STATUS -EFIAPI -GetAttributes( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT UINT64 *Attributes - ); - -/** - Sets up the specified PCI root bridge for the bus enumeration process. - - This member function sets up the root bridge for bus enumeration and returns the PCI bus range - over which the search should be performed in ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. - @param[in] RootBridgeHandle The PCI Root Bridge to be set up. - @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor. - - @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle - @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag. - @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor. - -**/ -EFI_STATUS -EFIAPI -StartBusEnumeration( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ); - -/** - Programs the PCI root bridge hardware so that it decodes the specified PCI bus range. - - This member function programs the specified PCI root bridge to decode the bus range that is - specified by the input parameter Configuration. - The bus range information is specified in terms of the ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance - @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed - @param[in] Configuration The pointer to the PCI bus resource descriptor - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than - bus descriptors. - @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors. - @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed. - -**/ -EFI_STATUS -EFIAPI -SetBusNumbers( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ); - -/** - Submits the I/O and memory resource requirements for the specified PCI root bridge. - - This function is used to submit all the I/O and memory resources that are required by the specified - PCI root bridge. The input parameter Configuration is used to specify the following: - - The various types of resources that are required - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted. - @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor. - - @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are - not supported by this PCI root bridge. This error will happen if the caller - did not combine resources according to Attributes that were returned by - GetAllocAttributes(). - @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge. - -**/ -EFI_STATUS -EFIAPI -SubmitResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ); - -/** - Returns the proposed resource settings for the specified PCI root bridge. - - This member function returns the proposed resource settings for the specified PCI root bridge. The - proposed resource settings are prepared when NotifyPhase() is called with a Phase of - EfiPciHostBridgeAllocateResources. The output parameter Configuration - specifies the following: - - The various types of resources, excluding bus resources, that are allocated - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -GetProposedResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ); - -/** - Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various - stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual - PCI controllers before enumeration. - - This function is called during the PCI enumeration process. No specific action is expected from this - member function. It allows the host bridge driver to preinitialize individual PCI controllers before - enumeration. - - @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in - InstallProtocolInterface() in the UEFI 2.0 Specification. - @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI - configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for - the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS. - @param Phase The phase of the PCI device enumeration. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in - EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should - not enumerate this device, including its child devices if it is a PCI-to-PCI - bridge. - -**/ -EFI_STATUS -EFIAPI -PreprocessController ( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, - IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase - ); - - -// -// Define resource status constant -// -#define EFI_RESOURCE_NONEXISTENT 0xFFFFFFFFFFFFFFFFULL -#define EFI_RESOURCE_LESS 0xFFFFFFFFFFFFFFFEULL - -// -// Driver Instance Data Prototypes -// - -typedef struct { - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation; - UINTN NumberOfBytes; - UINTN NumberOfPages; - EFI_PHYSICAL_ADDRESS HostAddress; - EFI_PHYSICAL_ADDRESS MappedHostAddress; -} MAP_INFO; - -typedef struct { - ACPI_HID_DEVICE_PATH AcpiDevicePath; - EFI_DEVICE_PATH_PROTOCOL EndDevicePath; -} EFI_PCI_ROOT_BRIDGE_DEVICE_PATH; - -typedef enum { - TypeIo = 0, - TypeMem32, - TypePMem32, - TypeMem64, - TypePMem64, - TypeBus, - TypeMax -} PCI_RESOURCE_TYPE; - -typedef enum { - ResNone = 0, - ResSubmitted, - ResRequested, - ResAllocated, - ResStatusMax -} RES_STATUS; - -typedef struct { - PCI_RESOURCE_TYPE Type; - UINT64 Base; - UINT64 Length; - UINT64 Alignment; - RES_STATUS Status; -} PCI_RES_NODE; - -#define PCI_ROOT_BRIDGE_SIGNATURE SIGNATURE_32('e', '2', 'p', 'b') - -typedef struct { - UINT32 Signature; - LIST_ENTRY Link; - EFI_HANDLE Handle; - UINT64 RootBridgeAttrib; - UINT64 Attributes; - UINT64 Supports; - - // - // Specific for this memory controller: Bus, I/O, Mem - // - PCI_RES_NODE ResAllocNode[6]; - - // - // Addressing for Memory and I/O and Bus arrange - // - UINT64 BusBase; - UINT64 MemBase; - UINT64 IoBase; - UINT64 BusLimit; - UINT64 MemLimit; - UINT64 IoLimit; - UINT64 RbPciBar; - UINT64 Ecam; - - UINTN PciAddress; - UINTN PciData; - UINTN Port; - UINT32 SocType; - UINT64 CpuMemRegionBase; - UINT64 CpuIoRegionBase; - UINT64 PciRegionBase; - UINT64 PciRegionLimit; - - EFI_DEVICE_PATH_PROTOCOL *DevicePath; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL Io; - -} PCI_ROOT_BRIDGE_INSTANCE; - - -// -// Driver Instance Data Macros -// -#define DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(a) \ - CR(a, PCI_ROOT_BRIDGE_INSTANCE, Io, PCI_ROOT_BRIDGE_SIGNATURE) - - -#define DRIVER_INSTANCE_FROM_LIST_ENTRY(a) \ - CR(a, PCI_ROOT_BRIDGE_INSTANCE, Link, PCI_ROOT_BRIDGE_SIGNATURE) - -/** - - Construct the Pci Root Bridge Io protocol - - @param Protocol Point to protocol instance - @param HostBridgeHandle Handle of host bridge - @param Attri Attribute of host bridge - @param ResAppeture ResourceAppeture for host bridge - - @retval EFI_SUCCESS Success to initialize the Pci Root Bridge. - -**/ -EFI_STATUS -RootBridgeConstructor ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol, - IN EFI_HANDLE HostBridgeHandle, - IN UINT64 Attri, - IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture, - IN UINT32 Seg - ); - -#endif diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c deleted file mode 100644 index e3d3988a64c1..000000000000 --- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciHostBridge.c +++ /dev/null @@ -1,1658 +0,0 @@ -/** - * Copyright (c) 2014, AppliedMicro Corp. All rights reserved. - * Copyright (c) 2016, Hisilicon Limited. All rights reserved. - * Copyright (c) 2016, Linaro Limited. All rights reserved. - * - * This program and the accompanying materials - * are licensed and made available under the terms and conditions of the BSD License - * which accompanies this distribution. The full text of the license may be found at - * http://opensource.org/licenses/bsd-license.php - * - * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - * - **/ - -#include -#include -#include -#include -#include -#include - -#include "PciHostBridge.h" - -UINTN RootBridgeNumber[PCIE_MAX_HOSTBRIDGE] = { PCIE_MAX_ROOTBRIDGE,PCIE_MAX_ROOTBRIDGE }; - -UINT64 RootBridgeAttribute[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_ROOTBRIDGE] = { - { //Host Bridge0 - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - }, - { //Host Bridge1 - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - EFI_PCI_HOST_BRIDGE_MEM64_DECODE, - } - }; - -EFI_PCI_ROOT_BRIDGE_DEVICE_PATH mEfiPciRootBridgeDevicePath[PCIE_MAX_HOSTBRIDGE][PCIE_MAX_ROOTBRIDGE] = { - { //Host Bridge0 - /* Port 0 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A03), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 1 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A04), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 2 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A05), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 3 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A06), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 4 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A07), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 5 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A08), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 6 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A09), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 7 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A0A), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - } -}, -{ // Host Bridge1 - /* Port 0 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A0B), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 1 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A0C), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 2 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A0D), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 3 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A0E), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 4 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A0F), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 5 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A10), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 6 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A11), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - }, - /* Port 7 */ - { - { - { - ACPI_DEVICE_PATH, - ACPI_DP, - { - (UINT8) (sizeof(ACPI_HID_DEVICE_PATH)), - (UINT8) ((sizeof(ACPI_HID_DEVICE_PATH)) >> 8) - } - }, - EISA_PNP_ID(0x0A12), - 0 - }, - - { - END_DEVICE_PATH_TYPE, - END_ENTIRE_DEVICE_PATH_SUBTYPE, - { - END_DEVICE_PATH_LENGTH, - 0 - } - } - } - } -}; - -EFI_HANDLE mDriverImageHandle; - -PCI_HOST_BRIDGE_INSTANCE mPciHostBridgeInstanceTemplate = { - PCI_HOST_BRIDGE_SIGNATURE, // Signature - NULL, // HostBridgeHandle - 0, // RootBridgeNumber - {NULL, NULL}, // Head - FALSE, // ResourceSubiteed - TRUE, // CanRestarted - { - NotifyPhase, - GetNextRootBridge, - GetAttributes, - StartBusEnumeration, - SetBusNumbers, - SubmitResources, - GetProposedResources, - PreprocessController - } -}; - -/** - Entry point of this driver - - @param ImageHandle Handle of driver image - @param SystemTable Point to EFI_SYSTEM_TABLE - - @retval EFI_OUT_OF_RESOURCES Can not allocate memory resource - @retval EFI_DEVICE_ERROR Can not install the protocol instance - @retval EFI_SUCCESS Success to initialize the Pci host bridge. -**/ -EFI_STATUS -EFIAPI -InitializePciHostBridge ( - IN EFI_HANDLE ImageHandle, - IN EFI_SYSTEM_TABLE *SystemTable - ) -{ - EFI_STATUS Status; - UINTN Loop1; - UINTN Loop2; - PCI_HOST_BRIDGE_INSTANCE *HostBridge = NULL; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - UINT32 PcieRootBridgeMask; - - if (!OemIsMpBoot()) - { - PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask); - } - else - { - PcieRootBridgeMask = PcdGet32(PcdPcieRootBridgeMask2P); - } - - mDriverImageHandle = ImageHandle; - // - // Create Host Bridge Device Handle - // - //Each Host Bridge have 8 Root Bridges max, every bits of 0xFF(8 bit) stands for the according PCIe Port - //is enable or not - for (Loop1 = 0; Loop1 < PCIE_MAX_HOSTBRIDGE; Loop1++) { - if (((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) & 0xFF ) == 0) { - continue; - } - - - HostBridge = AllocateCopyPool (sizeof(PCI_HOST_BRIDGE_INSTANCE), &mPciHostBridgeInstanceTemplate); - if (HostBridge == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - HostBridge->RootBridgeNumber = RootBridgeNumber[Loop1]; - InitializeListHead (&HostBridge->Head); - - Status = gBS->InstallMultipleProtocolInterfaces ( - &HostBridge->HostBridgeHandle, - &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc, - NULL - ); - if (EFI_ERROR (Status)) { - FreePool (HostBridge); - return EFI_DEVICE_ERROR; - } - - // - // Create Root Bridge Device Handle in this Host Bridge - // - for (Loop2 = 0; Loop2 < HostBridge->RootBridgeNumber; Loop2++) { - if (!(((PcieRootBridgeMask >> (PCIE_MAX_ROOTBRIDGE * Loop1)) >> Loop2 ) & 0x01)) { - continue; - } - - PrivateData = AllocateZeroPool (sizeof(PCI_ROOT_BRIDGE_INSTANCE)); - if (PrivateData == NULL) { - FreePool (HostBridge); - return EFI_OUT_OF_RESOURCES; - } - PrivateData->Port = Loop2; - PrivateData->SocType = PcdGet32(Pcdsoctype); - PrivateData->Signature = PCI_ROOT_BRIDGE_SIGNATURE; - PrivateData->DevicePath = (EFI_DEVICE_PATH_PROTOCOL *)&mEfiPciRootBridgeDevicePath[Loop1][Loop2]; - - (VOID)RootBridgeConstructor ( - &PrivateData->Io, - HostBridge->HostBridgeHandle, - RootBridgeAttribute[Loop1][Loop2], - &mResAppeture[Loop1][Loop2], - Loop1 - ); - - Status = gBS->InstallMultipleProtocolInterfaces( - &PrivateData->Handle, - &gEfiDevicePathProtocolGuid, PrivateData->DevicePath, - &gEfiPciRootBridgeIoProtocolGuid, &PrivateData->Io, - NULL - ); - if (EFI_ERROR (Status)) { - (VOID)gBS->UninstallMultipleProtocolInterfaces ( - HostBridge->HostBridgeHandle, - &gEfiPciHostBridgeResourceAllocationProtocolGuid, &HostBridge->ResAlloc, - NULL - ); - FreePool(PrivateData); - FreePool (HostBridge); - return EFI_DEVICE_ERROR; - } - // PCI Memory Space - Status = gDS->AddMemorySpace ( - EfiGcdMemoryTypeMemoryMappedIo, - mResAppeture[Loop1][Loop2] .MemBase, - mResAppeture[Loop1][Loop2] .MemLimit -mResAppeture[Loop1][Loop2] .MemBase + 1, - 0 - ); - if (EFI_ERROR (Status)) { - DEBUG((EFI_D_ERROR,"PCIE AddMemorySpace Error\n")); - } - InsertTailList (&HostBridge->Head, &PrivateData->Link); - } - } - - return EFI_SUCCESS; -} - -EFI_STATUS -EFIAPI -NotifyAllocateMemResources( - IN PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance, - IN PCI_RESOURCE_TYPE Index, - IN OUT UINT64 *AllocatedLenMem -) -{ - EFI_PHYSICAL_ADDRESS BaseAddress; - EFI_STATUS ReturnStatus; - UINT64 AddrLen; - UINTN BitsOfAlignment; - - AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - PCIE_DEBUG("Addrlen:%llx\n", AddrLen); - // Get the number of '1' in Alignment. - BitsOfAlignment = (UINTN) (HighBitSet64 (RootBridgeInstance->ResAllocNode[Index].Alignment) + 1); - - BaseAddress = (RootBridgeInstance->MemBase + *AllocatedLenMem + - RootBridgeInstance->ResAllocNode[Index].Alignment) - & ~(RootBridgeInstance->ResAllocNode[Index].Alignment); - if ((BaseAddress + AddrLen - 1) > RootBridgeInstance->MemLimit) { - ReturnStatus = EFI_OUT_OF_RESOURCES; - RootBridgeInstance->ResAllocNode[Index].Length = 0; - return ReturnStatus; - } - - PCIE_DEBUG("(P)Mem32/64 request memory at:%llx\n", BaseAddress); - ReturnStatus = gDS->AllocateMemorySpace ( - EfiGcdAllocateAddress, - EfiGcdMemoryTypeMemoryMappedIo, - BitsOfAlignment, - AddrLen, - &BaseAddress, - mDriverImageHandle, - NULL - ); - - if (!EFI_ERROR (ReturnStatus)) { - // We were able to allocate the PCI memory - RootBridgeInstance->ResAllocNode[Index].Base = (UINTN)BaseAddress; - RootBridgeInstance->ResAllocNode[Index].Status = ResAllocated; - *AllocatedLenMem += AddrLen; - PCIE_DEBUG("(P)Mem32/64 resource allocated:%llx\n", BaseAddress); - - } else { - // Not able to allocate enough PCI memory - if (ReturnStatus != EFI_OUT_OF_RESOURCES) { - RootBridgeInstance->ResAllocNode[Index].Length = 0; - } - } - return ReturnStatus; -} - -EFI_STATUS -EFIAPI -NotifyAllocateResources( - IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance -) -{ - EFI_STATUS ReturnStatus; - LIST_ENTRY *List; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - PCI_RESOURCE_TYPE Index; - - ReturnStatus = EFI_SUCCESS; - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - - UINT64 AllocatedLenMem = 0; - for (Index = TypeIo; Index < TypeBus; Index++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - if(Index == TypeIo) { - PCIE_DEBUG("NOT SUPPOER IO RESOURCES ON THIS PLATFORM\n"); - } else if ((Index >= TypeMem32) && (Index <= TypePMem64)) { - ReturnStatus = NotifyAllocateMemResources(RootBridgeInstance,Index,&AllocatedLenMem); - } else { - ASSERT (FALSE); - } - } - } - - List = List->ForwardLink; - } - - return ReturnStatus; -} - -EFI_STATUS -EFIAPI -NotifyFreeResources( - IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance -) -{ - EFI_STATUS ReturnStatus; - LIST_ENTRY *List; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - PCI_RESOURCE_TYPE Index; - UINT64 AddrLen; - EFI_PHYSICAL_ADDRESS BaseAddress; - - ReturnStatus = EFI_SUCCESS; - List = HostBridgeInstance->Head.ForwardLink; - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeBus; Index++) { - if (RootBridgeInstance->ResAllocNode[Index].Status == ResAllocated) { - AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - BaseAddress = RootBridgeInstance->ResAllocNode[Index].Base; - - if(Index <= TypePMem64){ - ReturnStatus = gDS->FreeMemorySpace (BaseAddress, AddrLen); - }else{ - ASSERT (FALSE); - } - - RootBridgeInstance->ResAllocNode[Index].Type = Index; - RootBridgeInstance->ResAllocNode[Index].Base = 0; - RootBridgeInstance->ResAllocNode[Index].Length = 0; - RootBridgeInstance->ResAllocNode[Index].Status = ResNone; - } - } - - List = List->ForwardLink; - } - - HostBridgeInstance->ResourceSubmited = FALSE; - HostBridgeInstance->CanRestarted = TRUE; - return ReturnStatus; - -} - -VOID -EFIAPI -NotifyBeginEnumeration( - IN PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance -) -{ - LIST_ENTRY *List; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - PCI_RESOURCE_TYPE Index; - - // - // Reset the Each Root Bridge - // - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - for (Index = TypeIo; Index < TypeMax; Index++) { - RootBridgeInstance->ResAllocNode[Index].Type = Index; - RootBridgeInstance->ResAllocNode[Index].Base = 0; - RootBridgeInstance->ResAllocNode[Index].Length = 0; - RootBridgeInstance->ResAllocNode[Index].Status = ResNone; - } - - List = List->ForwardLink; - } - - HostBridgeInstance->ResourceSubmited = FALSE; - HostBridgeInstance->CanRestarted = TRUE; -} - -/** - These are the notifications from the PCI bus driver that it is about to enter a certain - phase of the PCI enumeration process. - - This member function can be used to notify the host bridge driver to perform specific actions, - including any chipset-specific initialization, so that the chipset is ready to enter the next phase. - Eight notification points are defined at this time. See belows: - EfiPciHostBridgeBeginEnumeration Resets the host bridge PCI apertures and internal data - structures. The PCI enumerator should issue this notification - before starting a fresh enumeration process. Enumeration cannot - be restarted after sending any other notification such as - EfiPciHostBridgeBeginBusAllocation. - EfiPciHostBridgeBeginBusAllocation The bus allocation phase is about to begin. No specific action is - required here. This notification can be used to perform any - chipset-specific programming. - EfiPciHostBridgeEndBusAllocation The bus allocation and bus programming phase is complete. No - specific action is required here. This notification can be used to - perform any chipset-specific programming. - EfiPciHostBridgeBeginResourceAllocation - The resource allocation phase is about to begin. No specific - action is required here. This notification can be used to perform - any chipset-specific programming. - EfiPciHostBridgeAllocateResources Allocates resources per previously submitted requests for all the PCI - root bridges. These resource settings are returned on the next call to - GetProposedResources(). Before calling NotifyPhase() with a Phase of - EfiPciHostBridgeAllocateResource, the PCI bus enumerator is responsible - for gathering I/O and memory requests for - all the PCI root bridges and submitting these requests using - SubmitResources(). This function pads the resource amount - to suit the root bridge hardware, takes care of dependencies between - the PCI root bridges, and calls the Global Coherency Domain (GCD) - with the allocation request. In the case of padding, the allocated range - could be bigger than what was requested. - EfiPciHostBridgeSetResources Programs the host bridge hardware to decode previously allocated - resources (proposed resources) for all the PCI root bridges. After the - hardware is programmed, reassigning resources will not be supported. - The bus settings are not affected. - EfiPciHostBridgeFreeResources Deallocates resources that were previously allocated for all the PCI - root bridges and resets the I/O and memory apertures to their initial - state. The bus settings are not affected. If the request to allocate - resources fails, the PCI enumerator can use this notification to - deallocate previous resources, adjust the requests, and retry - allocation. - EfiPciHostBridgeEndResourceAllocation The resource allocation phase is completed. No specific action is - required here. This notification can be used to perform any chipsetspecific - programming. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] Phase The phase during enumeration - - @retval EFI_NOT_READY This phase cannot be entered at this time. For example, this error - is valid for a Phase of EfiPciHostBridgeAllocateResources if - SubmitResources() has not been called for one or more - PCI root bridges before this call - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. This error is valid - for a Phase of EfiPciHostBridgeSetResources. - @retval EFI_INVALID_PARAMETER Invalid phase parameter - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - This error is valid for a Phase of EfiPciHostBridgeAllocateResources if the - previously submitted resource requests cannot be fulfilled or - were only partially fulfilled. - @retval EFI_SUCCESS The notification was accepted without any errors. - -**/ -EFI_STATUS -EFIAPI -NotifyPhase( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PHASE Phase - ) -{ - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - EFI_STATUS ReturnStatus; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - ReturnStatus = EFI_SUCCESS; - - switch (Phase) { - - case EfiPciHostBridgeBeginEnumeration: - PCIE_DEBUG("Case EfiPciHostBridgeBeginEnumeration\n"); - if (HostBridgeInstance->CanRestarted) { - NotifyBeginEnumeration(HostBridgeInstance); - } else { - // - // Can not restart - // - return EFI_NOT_READY; - } - break; - - case EfiPciHostBridgeEndEnumeration: - PCIE_DEBUG("Case EfiPciHostBridgeEndEnumeration\n"); - break; - - case EfiPciHostBridgeBeginBusAllocation: - PCIE_DEBUG("Case EfiPciHostBridgeBeginBusAllocation\n"); - // - // No specific action is required here, can perform any chipset specific programing - // - - HostBridgeInstance->CanRestarted = FALSE; - break; - - case EfiPciHostBridgeEndBusAllocation: - PCIE_DEBUG("Case EfiPciHostBridgeEndBusAllocation\n"); - // - // No specific action is required here, can perform any chipset specific programing - // - break; - - case EfiPciHostBridgeBeginResourceAllocation: - PCIE_DEBUG("Case EfiPciHostBridgeBeginResourceAllocation\n"); - // - // No specific action is required here, can perform any chipset specific programing - // - break; - - case EfiPciHostBridgeAllocateResources: - PCIE_DEBUG("Case EfiPciHostBridgeAllocateResources\n"); - - if (HostBridgeInstance->ResourceSubmited) { - // - // Take care of the resource dependencies between the root bridges - // - ReturnStatus = NotifyAllocateResources(HostBridgeInstance); - } else { - return EFI_NOT_READY; - } - //break; - - case EfiPciHostBridgeSetResources: - PCIE_DEBUG("Case EfiPciHostBridgeSetResources\n"); - break; - - case EfiPciHostBridgeFreeResources: - PCIE_DEBUG("Case EfiPciHostBridgeFreeResources\n"); - - ReturnStatus = NotifyFreeResources(HostBridgeInstance); - break; - - case EfiPciHostBridgeEndResourceAllocation: - PCIE_DEBUG("Case EfiPciHostBridgeEndResourceAllocation\n"); - HostBridgeInstance->CanRestarted = FALSE; - break; - - default: - return EFI_INVALID_PARAMETER; - } - - return ReturnStatus; -} - -/** - Return the device handle of the next PCI root bridge that is associated with this Host Bridge. - - This function is called multiple times to retrieve the device handles of all the PCI root bridges that - are associated with this PCI host bridge. Each PCI host bridge is associated with one or more PCI - root bridges. On each call, the handle that was returned by the previous call is passed into the - interface, and on output the interface returns the device handle of the next PCI root bridge. The - caller can use the handle to obtain the instance of the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - for that root bridge. When there are no more PCI root bridges to report, the interface returns - EFI_NOT_FOUND. A PCI enumerator must enumerate the PCI root bridges in the order that they - are returned by this function. - For D945 implementation, there is only one root bridge in PCI host bridge. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in, out] RootBridgeHandle Returns the device handle of the next PCI root bridge. - - @retval EFI_SUCCESS If parameter RootBridgeHandle = NULL, then return the first Rootbridge handle of the - specific Host bridge and return EFI_SUCCESS. - @retval EFI_NOT_FOUND Can not find the any more root bridge in specific host bridge. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not an EFI_HANDLE that was - returned on a previous call to GetNextRootBridge(). -**/ -EFI_STATUS -EFIAPI -GetNextRootBridge( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN OUT EFI_HANDLE *RootBridgeHandle - ) -{ - BOOLEAN NoRootBridge; - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - - NoRootBridge = TRUE; - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - - while (List != &HostBridgeInstance->Head) { - NoRootBridge = FALSE; - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (*RootBridgeHandle == NULL) { - // - // Return the first Root Bridge Handle of the Host Bridge - // - *RootBridgeHandle = RootBridgeInstance->Handle; - return EFI_SUCCESS; - } else { - if (*RootBridgeHandle == RootBridgeInstance->Handle) { - // - // Get next if have - // - List = List->ForwardLink; - if (List!=&HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - *RootBridgeHandle = RootBridgeInstance->Handle; - return EFI_SUCCESS; - } else { - return EFI_NOT_FOUND; - } - } - } - - List = List->ForwardLink; - } //end while - - if (NoRootBridge) { - return EFI_NOT_FOUND; - } else { - return EFI_INVALID_PARAMETER; - } -} - -/** - Returns the allocation attributes of a PCI root bridge. - - The function returns the allocation attributes of a specific PCI root bridge. The attributes can vary - from one PCI root bridge to another. These attributes are different from the decode-related - attributes that are returned by the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL.GetAttributes() member function. The - RootBridgeHandle parameter is used to specify the instance of the PCI root bridge. The device - handles of all the root bridges that are associated with this host bridge must be obtained by calling - GetNextRootBridge(). The attributes are static in the sense that they do not change during or - after the enumeration process. The hardware may provide mechanisms to change the attributes on - the fly, but such changes must be completed before EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL is - installed. The permitted values of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ATTRIBUTES are defined in - "Related Definitions" below. The caller uses these attributes to combine multiple resource requests. - For example, if the flag EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM is set, the PCI bus enumerator needs to - include requests for the prefetchable memory in the nonprefetchable memory pool and not request any - prefetchable memory. - Attribute Description - ------------------------------------ ---------------------------------------------------------------------- - EFI_PCI_HOST_BRIDGE_COMBINE_MEM_PMEM If this bit is set, then the PCI root bridge does not support separate - windows for nonprefetchable and prefetchable memory. A PCI bus - driver needs to include requests for prefetchable memory in the - nonprefetchable memory pool. - - EFI_PCI_HOST_BRIDGE_MEM64_DECODE If this bit is set, then the PCI root bridge supports 64-bit memory - windows. If this bit is not set, the PCI bus driver needs to include - requests for a 64-bit memory address in the corresponding 32-bit - memory pool. - - @param[in] This The instance pointer of EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL - @param[in] RootBridgeHandle The device handle of the PCI root bridge in which the caller is interested. Type - EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Attributes The pointer to attribte of root bridge, it is output parameter - - @retval EFI_INVALID_PARAMETER Attribute pointer is NULL - @retval EFI_INVALID_PARAMETER RootBridgehandle is invalid. - @retval EFI_SUCCESS Success to get attribute of interested root bridge. - -**/ -EFI_STATUS -EFIAPI -GetAttributes( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT UINT64 *Attributes - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - - if (Attributes == NULL) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - *Attributes = RootBridgeInstance->RootBridgeAttrib; - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - // - // RootBridgeHandle is not an EFI_HANDLE - // that was returned on a previous call to GetNextRootBridge() - // - return EFI_INVALID_PARAMETER; -} - -/** - Sets up the specified PCI root bridge for the bus enumeration process. - - This member function sets up the root bridge for bus enumeration and returns the PCI bus range - over which the search should be performed in ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance. - @param[in] RootBridgeHandle The PCI Root Bridge to be set up. - @param[out] Configuration Pointer to the pointer to the PCI bus resource descriptor. - - @retval EFI_INVALID_PARAMETER Invalid Root bridge's handle - @retval EFI_OUT_OF_RESOURCES Fail to allocate ACPI resource descriptor tag. - @retval EFI_SUCCESS Sucess to allocate ACPI resource descriptor. - -**/ -EFI_STATUS -EFIAPI -StartBusEnumeration( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - VOID *Buffer; - UINT8 *Temp; - UINT64 BusStart; - UINT64 BusEnd; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - // - // Set up the Root Bridge for Bus Enumeration - // - BusStart = RootBridgeInstance->BusBase; - BusEnd = RootBridgeInstance->BusLimit; - // - // Program the Hardware(if needed) if error return EFI_DEVICE_ERROR - // - - Buffer = AllocatePool (sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR)); - if (Buffer == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - Temp = (UINT8 *)Buffer; - - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Desc = 0x8A; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->Len = 0x2B; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->ResType = 2; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->GenFlag = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->SpecificFlag = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrSpaceGranularity = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMin = BusStart; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrRangeMax = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrTranslationOffset = 0; - ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Temp)->AddrLen = BusEnd - BusStart + 1; - - Temp = Temp + sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79; - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0; - - *Configuration = Buffer; - return EFI_SUCCESS; - } - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Programs the PCI root bridge hardware so that it decodes the specified PCI bus range. - - This member function programs the specified PCI root bridge to decode the bus range that is - specified by the input parameter Configuration. - The bus range information is specified in terms of the ACPI 2.0 resource descriptor format. - - @param[in] This The EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_ PROTOCOL instance - @param[in] RootBridgeHandle The PCI Root Bridge whose bus range is to be programmed - @param[in] Configuration The pointer to the PCI bus resource descriptor - - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration does not include a valid ACPI 2.0 bus resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes valid ACPI 2.0 resource descriptors other than - bus descriptors. - @retval EFI_INVALID_PARAMETER Configuration contains one or more invalid ACPI resource descriptors. - @retval EFI_INVALID_PARAMETER "Address Range Minimum" is invalid for this root bridge. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this root bridge. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_SUCCESS The bus range for the PCI root bridge was programmed. - -**/ -EFI_STATUS -EFIAPI -SetBusNumbers( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINT8 *Ptr; - UINTN BusStart; - UINTN BusEnd; - UINTN BusLen; - - if (Configuration == NULL) { - return EFI_INVALID_PARAMETER; - } - - Ptr = Configuration; - - // - // Check the Configuration is valid - // - if(*Ptr != ACPI_ADDRESS_SPACE_DESCRIPTOR) { - return EFI_INVALID_PARAMETER; - } - - if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->ResType != 2) { - return EFI_INVALID_PARAMETER; - } - - Ptr += sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - if (*Ptr != ACPI_END_TAG_DESCRIPTOR) { - return EFI_INVALID_PARAMETER; - } - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - Ptr = Configuration; - - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - BusStart = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrRangeMin; - BusLen = (UINTN)((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)Ptr)->AddrLen; - BusEnd = BusStart + BusLen - 1; - - if (BusStart > BusEnd) { - return EFI_INVALID_PARAMETER; - } - - if ((BusStart < RootBridgeInstance->BusBase) || (BusEnd > RootBridgeInstance->BusLimit)) { - return EFI_INVALID_PARAMETER; - } - - // - // Update the Bus Range - // - RootBridgeInstance->ResAllocNode[TypeBus].Base = BusStart; - RootBridgeInstance->ResAllocNode[TypeBus].Length = BusLen; - RootBridgeInstance->ResAllocNode[TypeBus].Status = ResAllocated; - - // - // Program the Root Bridge Hardware - // - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -VOID -EFIAPI -SubmitGetResourceType( - IN EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr, - OUT UINT64* Index -) -{ - switch (Ptr->ResType) { - case 0: - if (Ptr->AddrSpaceGranularity == 32) { - if (Ptr->SpecificFlag == 0x06) - *Index = TypePMem32; - else - *Index = TypeMem32; - } - - if (Ptr->AddrSpaceGranularity == 64) { - if (Ptr->SpecificFlag == 0x06) - *Index = TypePMem64; - else - *Index = TypeMem64; - } - break; - - case 1: - *Index = TypeIo; - break; - - default: - break; - }; - -} - -/** - Submits the I/O and memory resource requirements for the specified PCI root bridge. - - This function is used to submit all the I/O and memory resources that are required by the specified - PCI root bridge. The input parameter Configuration is used to specify the following: - - The various types of resources that are required - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge whose I/O and memory resource requirements are being submitted. - @param[in] Configuration The pointer to the PCI I/O and PCI memory resource descriptor. - - @retval EFI_SUCCESS The I/O and memory resource requests for a PCI root bridge were accepted. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Configuration is NULL. - @retval EFI_INVALID_PARAMETER Configuration does not point to a valid ACPI 2.0 resource descriptor. - @retval EFI_INVALID_PARAMETER Configuration includes requests for one or more resource types that are - not supported by this PCI root bridge. This error will happen if the caller - did not combine resources according to Attributes that were returned by - GetAllocAttributes(). - @retval EFI_INVALID_PARAMETER Address Range Maximum" is invalid. - @retval EFI_INVALID_PARAMETER "Address Range Length" is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER "Address Space Granularity" is invalid for this PCI root bridge. - -**/ -EFI_STATUS -EFIAPI -SubmitResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN VOID *Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINT8 *Temp; - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; - UINT64 AddrLen; - UINT64 Alignment; - UINTN Index; - - PCIE_DEBUG("In SubmitResources\n"); - // - // Check the input parameter: Configuration - // - if (Configuration == NULL) - return EFI_INVALID_PARAMETER; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - Temp = (UINT8 *)Configuration; - while ( *Temp == 0x8A) - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ; - - if (*Temp != 0x79) - return EFI_INVALID_PARAMETER; - - Temp = (UINT8 *)Configuration; - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - while ( *Temp == 0x8A) { - Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ; - PCIE_DEBUG("Ptr->ResType:%d\n", Ptr->ResType); - PCIE_DEBUG("Ptr->Addrlen:%llx\n", Ptr->AddrLen); - PCIE_DEBUG("Ptr->AddrRangeMax:%llx\n", Ptr->AddrRangeMax); - PCIE_DEBUG("Ptr->AddrRangeMin:%llx\n", Ptr->AddrRangeMin); - PCIE_DEBUG("Ptr->SpecificFlag:%llx\n", Ptr->SpecificFlag); - PCIE_DEBUG("Ptr->AddrSpaceGranularity:%d\n", Ptr->AddrSpaceGranularity); - PCIE_DEBUG("RootBridgeInstance->RootBridgeAttrib:%llx\n", RootBridgeInstance->RootBridgeAttrib); - // - // Check address range alignment - // - if (Ptr->AddrRangeMax != (GetPowerOfTwo64 (Ptr->AddrRangeMax + 1) - 1)) { - return EFI_INVALID_PARAMETER; - } - Index = 0; - SubmitGetResourceType(Ptr,&Index); - AddrLen = (UINTN) Ptr->AddrLen; - Alignment = (UINTN) Ptr->AddrRangeMax; - RootBridgeInstance->ResAllocNode[Index].Length = AddrLen; - RootBridgeInstance->ResAllocNode[Index].Alignment = Alignment; - RootBridgeInstance->ResAllocNode[Index].Status = ResRequested; - HostBridgeInstance->ResourceSubmited = TRUE; - - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) ; - } - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - return EFI_INVALID_PARAMETER; -} - -/** - Returns the proposed resource settings for the specified PCI root bridge. - - This member function returns the proposed resource settings for the specified PCI root bridge. The - proposed resource settings are prepared when NotifyPhase() is called with a Phase of - EfiPciHostBridgeAllocateResources. The output parameter Configuration - specifies the following: - - The various types of resources, excluding bus resources, that are allocated - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -SetResource( - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance, - VOID *Buffer - -) -{ - UINTN Index; - UINT8 *Temp; - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *Ptr; - UINT64 ResStatus; - - Temp = Buffer; - - for (Index = 0; Index < TypeBus; Index ++) - { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - Ptr = (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *) Temp ; - ResStatus = RootBridgeInstance->ResAllocNode[Index].Status; - - switch (Index) { - - case TypeIo: - // - // Io - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 1; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - /* PCIE Device Iobar address should be based on IoBase */ - Ptr->AddrRangeMin = RootBridgeInstance->IoBase; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypeMem32: - // - // Memory 32 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrSpaceGranularity = 32; - /* PCIE device Bar should be based on PciRegionBase */ - if (RootBridgeInstance->PciRegionBase > MAX_UINT32) { - DEBUG((DEBUG_ERROR, "PCIE Res(TypeMem32) unsupported.\n")); - return EFI_UNSUPPORTED; - } - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase + - RootBridgeInstance->PciRegionBase; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypePMem32: - // - // Prefetch memory 32 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 6; - Ptr->AddrSpaceGranularity = 32; - /* PCIE device Bar should be based on PciRegionBase */ - if (RootBridgeInstance->PciRegionBase > MAX_UINT32) { - DEBUG((DEBUG_ERROR, "PCIE Res(TypePMem32) unsupported.\n")); - return EFI_UNSUPPORTED; - } - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase + - RootBridgeInstance->PciRegionBase; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypeMem64: - // - // Memory 64 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 0; - Ptr->AddrSpaceGranularity = 64; - /* PCIE device Bar should be based on PciRegionBase */ - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase + - RootBridgeInstance->PciRegionBase; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - - case TypePMem64: - // - // Prefetch memory 64 - // - Ptr->Desc = 0x8A; - Ptr->Len = 0x2B; - Ptr->ResType = 0; - Ptr->GenFlag = 0; - Ptr->SpecificFlag = 6; - Ptr->AddrSpaceGranularity = 64; - /* PCIE device Bar should be based on PciRegionBase */ - Ptr->AddrRangeMin = RootBridgeInstance->ResAllocNode[Index].Base - RootBridgeInstance->MemBase + - RootBridgeInstance->PciRegionBase; - Ptr->AddrRangeMax = 0; - Ptr->AddrTranslationOffset = \ - (ResStatus == ResAllocated) ? EFI_RESOURCE_SATISFIED : EFI_RESOURCE_LESS; - Ptr->AddrLen = RootBridgeInstance->ResAllocNode[Index].Length; - break; - }; - PCIE_DEBUG("Ptr->ResType:%d\n", Ptr->ResType); - PCIE_DEBUG("Ptr->Addrlen:%llx\n", Ptr->AddrLen); - PCIE_DEBUG("Ptr->AddrRangeMax:%llx\n", Ptr->AddrRangeMax); - PCIE_DEBUG("Ptr->AddrRangeMin:%llx\n", Ptr->AddrRangeMin); - PCIE_DEBUG("Ptr->SpecificFlag:%llx\n", Ptr->SpecificFlag); - PCIE_DEBUG("Ptr->AddrTranslationOffset:%d\n", Ptr->AddrTranslationOffset); - PCIE_DEBUG("Ptr->AddrSpaceGranularity:%d\n", Ptr->AddrSpaceGranularity); - - Temp += sizeof (EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR); - } - } - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Desc = 0x79; - ((EFI_ACPI_END_TAG_DESCRIPTOR *)Temp)->Checksum = 0x0; - - return EFI_SUCCESS; -} -/** - Returns the proposed resource settings for the specified PCI root bridge. - - This member function returns the proposed resource settings for the specified PCI root bridge. The - proposed resource settings are prepared when NotifyPhase() is called with a Phase of - EfiPciHostBridgeAllocateResources. The output parameter Configuration - specifies the following: - - The various types of resources, excluding bus resources, that are allocated - - The associated lengths in terms of ACPI 2.0 resource descriptor format - - @param[in] This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param[in] RootBridgeHandle The PCI root bridge handle. Type EFI_HANDLE is defined in InstallProtocolInterface() in the UEFI 2.0 Specification. - @param[out] Configuration The pointer to the pointer to the PCI I/O and memory resource descriptor. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -GetProposedResources( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - OUT VOID **Configuration - ) -{ - LIST_ENTRY *List; - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - UINTN Index; - UINTN Number; - VOID *Buffer; - - Buffer = NULL; - Number = 0; - - PCIE_DEBUG("In GetProposedResources\n"); - // - // Get the Host Bridge Instance from the resource allocation protocol - // - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - // - // Enumerate the root bridges in this host bridge - // - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - for (Index = 0; Index < TypeBus; Index ++) { - if (RootBridgeInstance->ResAllocNode[Index].Status != ResNone) { - Number ++; - } - } - - Buffer = AllocateZeroPool (Number * sizeof(EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR) + sizeof(EFI_ACPI_END_TAG_DESCRIPTOR)); - if (Buffer == NULL) { - return EFI_OUT_OF_RESOURCES; - } - - (VOID)SetResource(RootBridgeInstance,Buffer); - - *Configuration = Buffer; - - return EFI_SUCCESS; - } - - List = List->ForwardLink; - } - - return EFI_INVALID_PARAMETER; -} - -/** - Provides the hooks from the PCI bus driver to every PCI controller (device/function) at various - stages of the PCI enumeration process that allow the host bridge driver to preinitialize individual - PCI controllers before enumeration. - - This function is called during the PCI enumeration process. No specific action is expected from this - member function. It allows the host bridge driver to preinitialize individual PCI controllers before - enumeration. - - @param This Pointer to the EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL instance. - @param RootBridgeHandle The associated PCI root bridge handle. Type EFI_HANDLE is defined in - InstallProtocolInterface() in the UEFI 2.0 Specification. - @param PciAddress The address of the PCI device on the PCI bus. This address can be passed to the - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL member functions to access the PCI - configuration space of the device. See Table 12-1 in the UEFI 2.0 Specification for - the definition of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS. - @param Phase The phase of the PCI device enumeration. - - @retval EFI_SUCCESS The requested parameters were returned. - @retval EFI_INVALID_PARAMETER RootBridgeHandle is not a valid root bridge handle. - @retval EFI_INVALID_PARAMETER Phase is not a valid phase that is defined in - EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE. - @retval EFI_DEVICE_ERROR Programming failed due to a hardware error. The PCI enumerator should - not enumerate this device, including its child devices if it is a PCI-to-PCI - bridge. - -**/ -EFI_STATUS -EFIAPI -PreprocessController ( - IN EFI_PCI_HOST_BRIDGE_RESOURCE_ALLOCATION_PROTOCOL *This, - IN EFI_HANDLE RootBridgeHandle, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS PciAddress, - IN EFI_PCI_CONTROLLER_RESOURCE_ALLOCATION_PHASE Phase - ) -{ - PCI_HOST_BRIDGE_INSTANCE *HostBridgeInstance; - PCI_ROOT_BRIDGE_INSTANCE *RootBridgeInstance; - LIST_ENTRY *List; - - HostBridgeInstance = INSTANCE_FROM_RESOURCE_ALLOCATION_THIS (This); - List = HostBridgeInstance->Head.ForwardLink; - - // - // Enumerate the root bridges in this host bridge - // - while (List != &HostBridgeInstance->Head) { - RootBridgeInstance = DRIVER_INSTANCE_FROM_LIST_ENTRY (List); - if (RootBridgeHandle == RootBridgeInstance->Handle) { - break; - } - List = List->ForwardLink; - } - if (List == &HostBridgeInstance->Head) { - return EFI_INVALID_PARAMETER; - } - - if ((UINT32)Phase > EfiPciBeforeResourceCollection) { - return EFI_INVALID_PARAMETER; - } - - return EFI_SUCCESS; -} diff --git a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c b/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c deleted file mode 100644 index 3c265ea43378..000000000000 --- a/Silicon/Hisilicon/Drivers/PciHostBridgeDxe/PciRootBridgeIo.c +++ /dev/null @@ -1,2220 +0,0 @@ -/** - * Copyright (c) 2014, AppliedMicro Corp. All rights reserved. - * Copyright (c) 2016, Hisilicon Limited. All rights reserved. - * Copyright (c) 2016, Linaro Limited. All rights reserved. - * - * This program and the accompanying materials - * are licensed and made available under the terms and conditions of the BSD License - * which accompanies this distribution. The full text of the license may be found at - * http://opensource.org/licenses/bsd-license.php - * - * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - * - **/ - -#include "PciHostBridge.h" -#include -#include -#include -#include -#include - - -typedef struct { - EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR SpaceDesp[TypeMax]; - EFI_ACPI_END_TAG_DESCRIPTOR EndDesp; -} RESOURCE_CONFIGURATION; - -RESOURCE_CONFIGURATION Configuration = { - {{0x8A, 0x2B, 1, 0, 0, 0, 0, 0, 0, 0}, - {0x8A, 0x2B, 0, 0, 0, 32, 0, 0, 0, 0}, - {0x8A, 0x2B, 0, 0, 6, 32, 0, 0, 0, 0}, - {0x8A, 0x2B, 0, 0, 0, 64, 0, 0, 0, 0}, - {0x8A, 0x2B, 0, 0, 6, 64, 0, 0, 0, 0}, - {0x8A, 0x2B, 2, 0, 0, 0, 0, 0, 0, 0}}, - {0x79, 0} -}; - -// -// Protocol Member Function Prototypes -// - -/** - Polls an address in memory mapped I/O space until an exit condition is met, or - a timeout occurs. - - This function provides a standard way to poll a PCI memory location. A PCI memory read - operation is performed at the PCI memory address specified by Address for the width specified - by Width. The result of this PCI memory read operation is stored in Result. This PCI memory - read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result & - Mask) is equal to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the memory operations. The caller is - responsible for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the memory address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -/** - Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is - satisfied or after a defined duration. - - This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is - performed at the PCI I/O address specified by Address for the width specified by Width. - The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is - repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal - to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the I/O operations. - @param[in] Address The base address of the I/O operations. The caller is responsible - for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the I/O address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollIo ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[out] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - OUT VOID *UserBuffer - ); - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[in] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 UserAddress, - IN UINTN Count, - IN VOID *UserBuffer - ); - -/** - Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI - root bridge memory space. - - The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory - space to another region of PCI root bridge memory space. This is especially useful for video scroll - operation on a memory mapped video buffer. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI root bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. - @param[in] Width Signifies the width of the memory operations. - @param[in] DestAddress The destination address of the memory operation. The caller is - responsible for aligning the DestAddress if required. - @param[in] SrcAddress The source address of the memory operation. The caller is - responsible for aligning the SrcAddress if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at DestAddress and SrcAddress. - - @retval EFI_SUCCESS The data was copied from one memory region to another memory region. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoCopyMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 DestAddress, - IN UINT64 SrcAddress, - IN UINTN Count - ); - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ); - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ); - -/** - Provides the PCI controller-specific addresses required to access system memory from a - DMA bus master. - - The Map() function provides the PCI controller specific addresses needed to access system - memory. This function is used to map system memory for PCI bus master DMA accesses. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Operation Indicates if the bus master is going to read or write to system memory. - @param[in] HostAddress The system memory address to map to the PCI controller. - @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped. - @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use - to access the system memory's HostAddress. - @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete. - - @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. - @retval EFI_INVALID_PARAMETER Operation is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL. - @retval EFI_INVALID_PARAMETER DeviceAddress is NULL. - @retval EFI_INVALID_PARAMETER Mapping is NULL. - @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. - @retval EFI_DEVICE_ERROR The system hardware could not map the requested address. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ); - -/** - Completes the Map() operation and releases any corresponding resources. - - The Unmap() function completes the Map() operation and releases any corresponding resources. - If the operation was an EfiPciOperationBusMasterWrite or - EfiPciOperationBusMasterWrite64, the data is committed to the target system memory. - Any resources used for the mapping are freed. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Mapping The mapping value returned from Map(). - - @retval EFI_SUCCESS The range was unmapped. - @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). - @retval EFI_DEVICE_ERROR The data was not committed to the target system memory. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoUnmap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN VOID *Mapping - ); - -/** - Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or - EfiPciOperationBusMasterCommonBuffer64 mapping. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Type This parameter is not used and must be ignored. - @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData. - @param Pages The number of pages to allocate. - @param HostAddress A pointer to store the base system memory address of the allocated range. - @param Attributes The requested bit mask of attributes for the allocated range. Only - the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED, - and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function. - - @retval EFI_SUCCESS The requested memory pages were allocated. - @retval EFI_INVALID_PARAMETER MemoryType is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE. - @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoAllocateBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ); - -/** - Frees memory that was allocated with AllocateBuffer(). - - The FreeBuffer() function frees memory that was allocated with AllocateBuffer(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Pages The number of pages to free. - @param HostAddress The base system memory address of the allocated range. - - @retval EFI_SUCCESS The requested memory pages were freed. - @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages - was not allocated with AllocateBuffer(). - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFreeBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINTN Pages, - OUT VOID *HostAddress - ); - -/** - Flushes all PCI posted write transactions from a PCI host bridge to system memory. - - The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system - memory. Posted write transactions are generated by PCI bus masters when they perform write - transactions to target addresses in system memory. - This function does not flush posted write transactions from any PCI bridges. A PCI controller - specific action must be taken to guarantee that the posted write transactions have been flushed from - the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with - a PCI read transaction from the PCI controller prior to calling Flush(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host - bridge to system memory. - @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI - host bridge due to a hardware error. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFlush ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This - ); - -/** - Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the - attributes that a PCI root bridge is currently using. - - The GetAttributes() function returns the mask of attributes that this PCI root bridge supports - and the mask of attributes that the PCI root bridge is currently using. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Supported A pointer to the mask of attributes that this PCI root bridge - supports setting with SetAttributes(). - @param Attributes A pointer to the mask of attributes that this PCI root bridge is - currently using. - - @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root - bridge supports is returned in Supports. If Attributes is - not NULL, then the attributes that the PCI root bridge is currently - using is returned in Attributes. - @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoGetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT UINT64 *Supported, - OUT UINT64 *Attributes - ); - -/** - Sets attributes for a resource range on a PCI root bridge. - - The SetAttributes() function sets the attributes specified in Attributes for the PCI root - bridge on the resource range specified by ResourceBase and ResourceLength. Since the - granularity of setting these attributes may vary from resource type to resource type, and from - platform to platform, the actual resource range and the one passed in by the caller may differ. As a - result, this function may set the attributes specified by Attributes on a larger resource range - than the caller requested. The actual range is returned in ResourceBase and - ResourceLength. The caller is responsible for verifying that the actual range for which the - attributes were set is acceptable. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Attributes The mask of attributes to set. If the attribute bit - MEMORY_WRITE_COMBINE, MEMORY_CACHED, or - MEMORY_DISABLE is set, then the resource range is specified by - ResourceBase and ResourceLength. If - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and - MEMORY_DISABLE are not set, then ResourceBase and - ResourceLength are ignored, and may be NULL. - @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified - by the attributes specified by Attributes. - @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the - attributes specified by Attributes. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoSetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN OUT UINT64 *ResourceBase, - IN OUT UINT64 *ResourceLength - ); - -/** - Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0 - resource descriptors. - - There are only two resource descriptor types from the ACPI Specification that may be used to - describe the current resources allocated to a PCI root bridge. These are the QWORD Address - Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The - QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic - or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD - Address Space Descriptors followed by an End Tag. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the - current configuration of this PCI root bridge. The storage for the - ACPI 2.0 resource descriptors is allocated by this function. The - caller must treat the return buffer as read-only data, and the buffer - must not be freed by the caller. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoConfiguration ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT VOID **Resources - ); - -// -// Memory Controller Pci Root Bridge Io Module Variables -// -EFI_METRONOME_ARCH_PROTOCOL *mMetronome; - -// -// Lookup table for increment values based on transfer widths -// -UINT8 mInStride[] = { - 1, // EfiPciWidthUint8 - 2, // EfiPciWidthUint16 - 4, // EfiPciWidthUint32 - 8, // EfiPciWidthUint64 - 0, // EfiPciWidthFifoUint8 - 0, // EfiPciWidthFifoUint16 - 0, // EfiPciWidthFifoUint32 - 0, // EfiPciWidthFifoUint64 - 1, // EfiPciWidthFillUint8 - 2, // EfiPciWidthFillUint16 - 4, // EfiPciWidthFillUint32 - 8 // EfiPciWidthFillUint64 -}; - -// -// Lookup table for increment values based on transfer widths -// -UINT8 mOutStride[] = { - 1, // EfiPciWidthUint8 - 2, // EfiPciWidthUint16 - 4, // EfiPciWidthUint32 - 8, // EfiPciWidthUint64 - 1, // EfiPciWidthFifoUint8 - 2, // EfiPciWidthFifoUint16 - 4, // EfiPciWidthFifoUint32 - 8, // EfiPciWidthFifoUint64 - 0, // EfiPciWidthFillUint8 - 0, // EfiPciWidthFillUint16 - 0, // EfiPciWidthFillUint32 - 0 // EfiPciWidthFillUint64 -}; - - -UINT64 GetPcieCfgAddress ( - UINT64 Ecam, - UINTN Bus, - UINTN Device, - UINTN Function, - UINTN Reg - ) -{ - return Ecam + PCI_EXPRESS_LIB_ADDRESS (Bus, Device, Function, Reg); -} - - -BOOLEAN PcieIsLinkUp (UINT32 SocType, UINTN RbPciBar, UINTN Port) -{ - UINT32 Value = 0; - - if (0x1610 == SocType) - { - Value = MmioRead32(RbPciBar + 0x131C); - if ((Value & 0x3F) == 0x11) - { - return TRUE; - } - return FALSE; - } - else - { - Value = MmioRead32 (0xb0000000 + 0x6818 + 0x100 * Port); - if ((Value & 0x3F) == 0x11) - { - return TRUE; - } - return FALSE; - } -} - -/** - - Construct the Pci Root Bridge Io protocol - - @param Protocol Point to protocol instance - @param HostBridgeHandle Handle of host bridge - @param Attri Attribute of host bridge - @param ResAppeture ResourceAppeture for host bridge - - @retval EFI_SUCCESS Success to initialize the Pci Root Bridge. - -**/ -EFI_STATUS -RootBridgeConstructor ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *Protocol, - IN EFI_HANDLE HostBridgeHandle, - IN UINT64 Attri, - IN PCI_ROOT_BRIDGE_RESOURCE_APPETURE *ResAppeture, - IN UINT32 Seg - ) -{ - EFI_STATUS Status; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - PCI_RESOURCE_TYPE Index; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (Protocol); - - // - // The host to pci bridge, the host memory and io addresses are - // direct mapped to pci addresses, so no need translate, set bases to 0. - // - PrivateData->MemBase = ResAppeture->MemBase; - PrivateData->IoBase = ResAppeture->IoBase; - PrivateData->RbPciBar = ResAppeture->RbPciBar; - PrivateData->MemLimit = ResAppeture->MemLimit; - PrivateData->IoLimit = ResAppeture->IoLimit; - PrivateData->Ecam = ResAppeture->Ecam; - PrivateData->CpuMemRegionBase = ResAppeture->CpuMemRegionBase; - PrivateData->CpuIoRegionBase = ResAppeture->CpuIoRegionBase; - PrivateData->PciRegionBase = ResAppeture->PciRegionBase; - PrivateData->PciRegionLimit = ResAppeture->PciRegionLimit; - - // - // Bus Appeture for this Root Bridge (Possible Range) - // - PrivateData->BusBase = ResAppeture->BusBase; - PrivateData->BusLimit = ResAppeture->BusLimit; - - // - // Specific for this chipset - // - for (Index = TypeIo; Index < TypeMax; Index++) { - PrivateData->ResAllocNode[Index].Type = Index; - PrivateData->ResAllocNode[Index].Base = 0; - PrivateData->ResAllocNode[Index].Length = 0; - PrivateData->ResAllocNode[Index].Status = ResNone; - } - - PrivateData->RootBridgeAttrib = Attri; - - PrivateData->Supports = EFI_PCI_ATTRIBUTE_IDE_PRIMARY_IO | EFI_PCI_ATTRIBUTE_IDE_SECONDARY_IO | \ - EFI_PCI_ATTRIBUTE_ISA_IO_16 | EFI_PCI_ATTRIBUTE_ISA_MOTHERBOARD_IO | \ - EFI_PCI_ATTRIBUTE_VGA_MEMORY | \ - EFI_PCI_ATTRIBUTE_VGA_IO_16 | EFI_PCI_ATTRIBUTE_VGA_PALETTE_IO_16 | \ - EFI_PCI_ATTRIBUTE_VALID_FOR_ALLOCATE_BUFFER; - PrivateData->Attributes = PrivateData->Supports; - - Protocol->ParentHandle = HostBridgeHandle; - - Protocol->PollMem = RootBridgeIoPollMem; - Protocol->PollIo = RootBridgeIoPollIo; - - Protocol->Mem.Read = RootBridgeIoMemRead; - Protocol->Mem.Write = RootBridgeIoMemWrite; - - Protocol->Io.Read = RootBridgeIoIoRead; - Protocol->Io.Write = RootBridgeIoIoWrite; - - Protocol->CopyMem = RootBridgeIoCopyMem; - - Protocol->Pci.Read = RootBridgeIoPciRead; - Protocol->Pci.Write = RootBridgeIoPciWrite; - - Protocol->Map = RootBridgeIoMap; - Protocol->Unmap = RootBridgeIoUnmap; - - Protocol->AllocateBuffer = RootBridgeIoAllocateBuffer; - Protocol->FreeBuffer = RootBridgeIoFreeBuffer; - - Protocol->Flush = RootBridgeIoFlush; - - Protocol->GetAttributes = RootBridgeIoGetAttributes; - Protocol->SetAttributes = RootBridgeIoSetAttributes; - - Protocol->Configuration = RootBridgeIoConfiguration; - - Protocol->SegmentNumber = Seg; - - - Status = gBS->LocateProtocol (&gEfiMetronomeArchProtocolGuid, NULL, (VOID **)&mMetronome); - if (EFI_ERROR(Status)) - { - DEBUG((EFI_D_ERROR,"LocateProtocol MetronomeArchProtocol Error\n")); - } - - return EFI_SUCCESS; -} - -/** - Check parameters for IO,MMIO,PCI read/write services of PCI Root Bridge IO. - - The I/O operations are carried out exactly as requested. The caller is responsible - for satisfying any alignment and I/O width restrictions that a PI System on a - platform might require. For example on some platforms, width requests of - EfiCpuIoWidthUint64 do not work. Misaligned buffers, on the other hand, will - be handled by the driver. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] OperationType I/O operation type: IO/MMIO/PCI. - @param[in] Width Signifies the width of the I/O or Memory operation. - @param[in] Address The base address of the I/O operation. - @param[in] Count The number of I/O operations to perform. The number of - bytes moved is Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. - For write operations, the source buffer from which to write data. - - @retval EFI_SUCCESS The parameters for this request pass the checks. - @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. - @retval EFI_UNSUPPORTED The address range specified by Address, Width, - and Count is not valid for this PI system. - -**/ -EFI_STATUS -RootBridgeIoCheckParameter ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN OPERATION_TYPE OperationType, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *PciRbAddr; - UINT64 MaxCount; - UINT64 Base; - UINT64 Limit; - - // - // Check to see if Buffer is NULL - // - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Check to see if Width is in the valid range - // - if ((UINT32)Width >= EfiPciWidthMaximum) { - return EFI_INVALID_PARAMETER; - } - - // - // For FIFO type, the target address won't increase during the access, - // so treat Count as 1 - // - if (Width >= EfiPciWidthFifoUint8 && Width <= EfiPciWidthFifoUint64) { - Count = 1; - } - - // - // Check to see if Width is in the valid range for I/O Port operations - // - Width = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - if ((OperationType != MemOperation) && (Width == EfiPciWidthUint64)) { - ASSERT (FALSE); - return EFI_INVALID_PARAMETER; - } - - // - // Check to see if Address is aligned - // - if ((Address & (UINT64)(mInStride[Width] - 1)) != 0) { - return EFI_UNSUPPORTED; - } - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - - // - // Check to see if any address associated with this transfer exceeds the maximum - // allowed address. The maximum address implied by the parameters passed in is - // Address + Size * Count. If the following condition is met, then the transfer - // is not supported. - // - // Address + Size * Count > Limit + 1 - // - // Since Limit can be the maximum integer value supported by the CPU and Count - // can also be the maximum integer value supported by the CPU, this range - // check must be adjusted to avoid all oveflow conditions. - // - // The following form of the range check is equivalent but assumes that - // Limit is of the form (2^n - 1). - // - if (OperationType == IoOperation) { - Base = PrivateData->IoBase; - Limit = PrivateData->IoLimit; - } else if (OperationType == MemOperation) { - Base = PrivateData->MemBase; - Limit = PrivateData->MemLimit; - } else { - PciRbAddr = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS*) &Address; - if (PciRbAddr->Bus < PrivateData->BusBase || PciRbAddr->Bus > PrivateData->BusLimit) { - return EFI_INVALID_PARAMETER; - } - - /* The root complex has only one device / function */ - if (PciRbAddr->Bus == PrivateData->BusBase && PciRbAddr->Device != 0) { - return EFI_INVALID_PARAMETER; - } - - /* The other side of the RC has only one device as well */ - if (PciRbAddr->Bus == (PrivateData->BusBase + 1 ) && PciRbAddr->Device != 0) { - return EFI_INVALID_PARAMETER; - } - - if (PciRbAddr->Device > MAX_PCI_DEVICE_NUMBER || PciRbAddr->Function > MAX_PCI_FUNCTION_NUMBER) { - return EFI_INVALID_PARAMETER; - } - - if (PciRbAddr->ExtendedRegister != 0) { - Address = PciRbAddr->ExtendedRegister; - } else { - Address = PciRbAddr->Register; - } - Base = 0; - Limit = MAX_PCI_REG_ADDRESS; - } - - if (Address < Base) { - return EFI_INVALID_PARAMETER; - } - - if (Count == 0) { - if (Address > Limit) { - return EFI_UNSUPPORTED; - } - } else { - MaxCount = RShiftU64 (Limit, Width); - if (MaxCount < (Count - 1)) { - return EFI_UNSUPPORTED; - } - if (Address > LShiftU64 (MaxCount - Count + 1, Width)) { - return EFI_UNSUPPORTED; - } - } - - return EFI_SUCCESS; -} - -/** - Internal help function for read and write memory space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Write Switch value for Read or Write. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -RootBridgeIoMemRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - /* Address is bus resource */ - Address -= PrivateData->PciRegionBase; - Address += PrivateData->CpuMemRegionBase; - - PCIE_DEBUG("RootBridgeIoMemRW Address:0x%llx\n", Address); - PCIE_DEBUG("RootBridgeIoMemRW Count:0x%llx\n", Count); - PCIE_DEBUG("RootBridgeIoMemRW Write:0x%llx\n", Write); - PCIE_DEBUG("RootBridgeIoMemRW Width:0x%llx\n", Width); - - Status = RootBridgeIoCheckParameter (This, MemOperation, Width, Address, Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - MmioWrite8 ((UINTN)Address, *Uint8Buffer); - break; - case EfiPciWidthUint16: - MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); - break; - case EfiPciWidthUint64: - MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = MmioRead8 ((UINTN)Address); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); - break; - case EfiPciWidthUint64: - *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - return EFI_SUCCESS; -} - -/** - Internal help function for read and write IO space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Write Switch value for Read or Write. - @param[in] Width Signifies the width of the memory operations. - @param[in] UserAddress The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in, out] UserBuffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -RootBridgeIoIoRW ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN BOOLEAN Write, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN OUT VOID *Buffer - ) -{ - EFI_STATUS Status; - UINT8 InStride; - UINT8 OutStride; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - /* Address is bus resource */ - Address -= PrivateData->IoBase; - Address += PrivateData->CpuIoRegionBase; - - Status = RootBridgeIoCheckParameter (This, IoOperation, Width, Address, Count, Buffer); - if (EFI_ERROR (Status)) { - return Status; - } - - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH) (Width & 0x03); - - for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { - if (Write) { - switch (OperationWidth) { - case EfiPciWidthUint8: - MmioWrite8 ((UINTN)Address, *Uint8Buffer); - break; - case EfiPciWidthUint16: - MmioWrite16 ((UINTN)Address, *((UINT16 *)Uint8Buffer)); - break; - case EfiPciWidthUint32: - MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); - break; - case EfiPciWidthUint64: - MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer)); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } else { - switch (OperationWidth) { - case EfiPciWidthUint8: - *Uint8Buffer = MmioRead8 ((UINTN)Address); - break; - case EfiPciWidthUint16: - *((UINT16 *)Uint8Buffer) = MmioRead16 ((UINTN)Address); - break; - case EfiPciWidthUint32: - *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); - break; - case EfiPciWidthUint64: - *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address); - break; - default: - // - // The RootBridgeIoCheckParameter call above will ensure that this - // path is not taken. - // - ASSERT (FALSE); - break; - } - } - } - return EFI_SUCCESS; -} - - -/** - Polls an address in memory mapped I/O space until an exit condition is met, or - a timeout occurs. - - This function provides a standard way to poll a PCI memory location. A PCI memory read - operation is performed at the PCI memory address specified by Address for the width specified - by Width. The result of this PCI memory read operation is stored in Result. This PCI memory - read operation is repeated until either a timeout of Delay 100 ns units has expired, or (Result & - Mask) is equal to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the memory operations. The caller is - responsible for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the memory address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - EFI_STATUS Status; - UINT64 NumberOfTicks; - UINT32 Remainder; - - if (Result == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // No matter what, always do a single poll. - // - Status = This->Mem.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - if (Delay == 0) { - return EFI_TIMEOUT; - - } else { - - // - // Determine the proper # of metronome ticks to wait for polling the - // location. The nuber of ticks is Roundup (Delay / mMetronome->TickPeriod)+1 - // The "+1" to account for the possibility of the first tick being short - // because we started in the middle of a tick. - // - // BugBug: overriding mMetronome->TickPeriod with UINT32 until Metronome - // protocol definition is updated. - // - NumberOfTicks = DivU64x32Remainder (Delay, (UINT32) mMetronome->TickPeriod, &Remainder); - if (Remainder != 0) { - NumberOfTicks += 1; - } - NumberOfTicks += 1; - - while (NumberOfTicks != 0) { - - mMetronome->WaitForTick (mMetronome, 1); - - Status = This->Mem.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - NumberOfTicks -= 1; - } - } - return EFI_TIMEOUT; -} - -/** - Reads from the I/O space of a PCI Root Bridge. Returns when either the polling exit criteria is - satisfied or after a defined duration. - - This function provides a standard way to poll a PCI I/O location. A PCI I/O read operation is - performed at the PCI I/O address specified by Address for the width specified by Width. - The result of this PCI I/O read operation is stored in Result. This PCI I/O read operation is - repeated until either a timeout of Delay 100 ns units has expired, or (Result & Mask) is equal - to Value. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the I/O operations. - @param[in] Address The base address of the I/O operations. The caller is responsible - for aligning Address if required. - @param[in] Mask Mask used for the polling criteria. Bytes above Width in Mask - are ignored. The bits in the bytes below Width which are zero in - Mask are ignored when polling the I/O address. - @param[in] Value The comparison value used for the polling exit criteria. - @param[in] Delay The number of 100 ns units to poll. Note that timer available may - be of poorer granularity. - @param[out] Result Pointer to the last value read from the memory location. - - @retval EFI_SUCCESS The last data returned from the access matched the poll exit criteria. - @retval EFI_INVALID_PARAMETER Width is invalid. - @retval EFI_INVALID_PARAMETER Result is NULL. - @retval EFI_TIMEOUT Delay expired before a match occurred. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPollIo ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINT64 Mask, - IN UINT64 Value, - IN UINT64 Delay, - OUT UINT64 *Result - ) -{ - EFI_STATUS Status; - UINT64 NumberOfTicks; - UINT32 Remainder; - - // - // No matter what, always do a single poll. - // - - if (Result == NULL) { - return EFI_INVALID_PARAMETER; - } - - Status = This->Io.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - if (Delay == 0) { - return EFI_SUCCESS; - - } else { - - // - // Determine the proper # of metronome ticks to wait for polling the - // location. The number of ticks is Roundup (Delay / mMetronome->TickPeriod)+1 - // The "+1" to account for the possibility of the first tick being short - // because we started in the middle of a tick. - // - NumberOfTicks = DivU64x32Remainder (Delay, (UINT32)mMetronome->TickPeriod, &Remainder); - if (Remainder != 0) { - NumberOfTicks += 1; - } - NumberOfTicks += 1; - - while (NumberOfTicks != 0) { - - mMetronome->WaitForTick (mMetronome, 1); - - Status = This->Io.Read (This, Width, Address, 1, Result); - if (EFI_ERROR (Status)) { - return Status; - } - - if ((*Result & Mask) == Value) { - return EFI_SUCCESS; - } - - NumberOfTicks -= 1; - } - } - return EFI_TIMEOUT; -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoMemRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge memory space. - - The Mem.Read(), and Mem.Write() functions enable a driver to access PCI controller - registers in the PCI root bridge memory space. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI Root Bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operation. - @param[in] Address The base address of the memory operation. The caller is - responsible for aligning the Address if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMemWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoMemRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - return RootBridgeIoIoRW (This, FALSE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to access PCI controller registers in the PCI root bridge I/O space. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The base address of the I/O operation. The caller is responsible for - aligning the Address if required. - @param[in] Count The number of I/O operations to perform. Bytes moved is Width - size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoIoWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - return RootBridgeIoIoRW (This, TRUE, Width, Address, Count, Buffer); -} - -/** - Enables a PCI driver to copy one region of PCI root bridge memory space to another region of PCI - root bridge memory space. - - The CopyMem() function enables a PCI driver to copy one region of PCI root bridge memory - space to another region of PCI root bridge memory space. This is especially useful for video scroll - operation on a memory mapped video buffer. - The memory operations are carried out exactly as requested. The caller is responsible for satisfying - any alignment and memory width restrictions that a PCI root bridge on a platform might require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL instance. - @param[in] Width Signifies the width of the memory operations. - @param[in] DestAddress The destination address of the memory operation. The caller is - responsible for aligning the DestAddress if required. - @param[in] SrcAddress The source address of the memory operation. The caller is - responsible for aligning the SrcAddress if required. - @param[in] Count The number of memory operations to perform. Bytes moved is - Width size * Count, starting at DestAddress and SrcAddress. - - @retval EFI_SUCCESS The data was copied from one memory region to another memory region. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoCopyMem ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 DestAddress, - IN UINT64 SrcAddress, - IN UINTN Count - ) -{ - EFI_STATUS Status; - BOOLEAN Direction; - UINTN Stride; - UINTN Index; - UINT64 Result; - - if ((UINT32)Width > EfiPciWidthUint64) { - return EFI_INVALID_PARAMETER; - } - - if (DestAddress == SrcAddress) { - return EFI_SUCCESS; - } - - Stride = (UINTN)((UINTN)1 << Width); - - Direction = TRUE; - if ((DestAddress > SrcAddress) && (DestAddress < (SrcAddress + Count * Stride))) { - Direction = FALSE; - SrcAddress = SrcAddress + (Count-1) * Stride; - DestAddress = DestAddress + (Count-1) * Stride; - } - - for (Index = 0;Index < Count;Index++) { - Status = RootBridgeIoMemRead ( - This, - Width, - SrcAddress, - 1, - &Result - ); - if (EFI_ERROR (Status)) { - return Status; - } - Status = RootBridgeIoMemWrite ( - This, - Width, - DestAddress, - 1, - &Result - ); - if (EFI_ERROR (Status)) { - return Status; - } - if (Direction) { - SrcAddress += Stride; - DestAddress += Stride; - } else { - SrcAddress -= Stride; - DestAddress -= Stride; - } - } - return EFI_SUCCESS; -} - -/** - Reads memory-mapped registers. - @param[in] Width Signifies the width of the I/O or Memory operation. - @param[in] Address The base address of the I/O operation. - @param[in] Count The number of I/O operations to perform. The number of - bytes moved is Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. - For write operations, the source buffer from which to write data. - - @retval EFI_SUCCESS The data was read from or written to the PI system. - @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. - @retval EFI_UNSUPPORTED The address range specified by Address, Width, - and Count is not valid for this PI system. - -**/ -EFI_STATUS -CpuMemoryServiceRead ( - IN EFI_CPU_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - - UINT8 InStride; - UINT8 OutStride; - EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - UINT32 Uint32Buffer = 0; - - // - // Select loop based on the width of the transfer - // - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); - for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { - if (OperationWidth == EfiCpuIoWidthUint8) { - Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3))); - Uint32Buffer &= (0xFF << ((Address & 0x3) * 8)); - *((UINT8*)Uint8Buffer) = (UINT8)(Uint32Buffer >> (((Address & 0x3) * 8))); - } else if (OperationWidth == EfiCpuIoWidthUint16) { - if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) { - return EFI_INVALID_PARAMETER; - } - Uint32Buffer = MmioRead32((UINTN)(Address & (~0x3))); - Uint32Buffer &= (0xFFFF << ((Address & 0x3) * 8)); - *(UINT16 *)Uint8Buffer = (UINT16)(Uint32Buffer >> (((Address & 0x3) * 8))); - } else if (OperationWidth == EfiCpuIoWidthUint32) { - *((UINT32 *)Uint8Buffer) = MmioRead32 ((UINTN)Address); - } else if (OperationWidth == EfiCpuIoWidthUint64) { - *((UINT64 *)Uint8Buffer) = MmioRead64 ((UINTN)Address); - } - } - return EFI_SUCCESS; -} - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[out] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciRead ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 EfiAddress, - IN UINTN Count, - OUT VOID *Buffer - ) -{ - UINT32 Offset; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress; - UINT64 Address; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress; - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - if (Width >= EfiPciWidthMaximum) { - return EFI_INVALID_PARAMETER; - } - - if (EfiPciAddress->ExtendedRegister) { - Offset = EfiPciAddress->ExtendedRegister; - } else { - Offset = EfiPciAddress->Register; - } - - PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__, - EfiPciAddress->Bus, - EfiPciAddress->Device, - EfiPciAddress->Function, - Offset - ); - if (EfiPciAddress->Bus < PrivateData->BusBase || EfiPciAddress->Bus > PrivateData->BusLimit) { - PCIE_DEBUG ("[%a:%d] - Bus number out of range %d\n", __FUNCTION__, __LINE__, EfiPciAddress->Bus); - SetMem (Buffer, mOutStride[Width] * Count, 0xFF); - return EFI_INVALID_PARAMETER; - } - - // The UEFI PCI enumerator scans for devices at all possible addresses, - // and ignores some PCI rules - this results in some hardware being - // detected multiple times. We work around this by faking absent - // devices - if(EfiPciAddress->Bus == PrivateData->BusBase) - { - if((EfiPciAddress->Device != 0x0) || (EfiPciAddress->Function != 0)) { - SetMem (Buffer, mOutStride[Width] * Count, 0xFF); - return EFI_UNSUPPORTED; - } - } - - if (EfiPciAddress->Bus == PrivateData->BusBase){ - Address = PrivateData->RbPciBar + Offset; - } - else if(EfiPciAddress->Bus == PrivateData->BusBase + 1) - { - if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port)) - { - SetMem (Buffer, mOutStride[Width] * Count, 0xFF); - return EFI_NOT_READY; - } - Address = GetPcieCfgAddress ( - PrivateData->Ecam, - EfiPciAddress->Bus, - EfiPciAddress->Device, - EfiPciAddress->Function, - Offset - ); - } - else - { - Address = GetPcieCfgAddress ( - PrivateData->Ecam, - EfiPciAddress->Bus, - EfiPciAddress->Device, - EfiPciAddress->Function, - Offset - ); - } - - (VOID)CpuMemoryServiceRead((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer); - PCIE_DEBUG ("[%a:%d] - %x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer); - - return EFI_SUCCESS; -} - -/** - Writes memory-mapped registers. - @param[in] Width Signifies the width of the I/O or Memory operation. - @param[in] Address The base address of the I/O operation. - @param[in] Count The number of I/O operations to perform. The number of - bytes moved is Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. - For write operations, the source buffer from which to write data. - - @retval EFI_SUCCESS The data was read from or written to the PI system. - @retval EFI_INVALID_PARAMETER Width is invalid for this PI system. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_UNSUPPORTED The Buffer is not aligned for the given Width. - @retval EFI_UNSUPPORTED The address range specified by Address, Width, - and Count is not valid for this PI system. - -**/ -EFI_STATUS -CpuMemoryServiceWrite ( - IN EFI_CPU_IO_PROTOCOL_WIDTH Width, - IN UINT64 Address, - IN UINTN Count, - IN VOID *Buffer - ) -{ - UINT8 InStride; - UINT8 OutStride; - EFI_CPU_IO_PROTOCOL_WIDTH OperationWidth; - UINT8 *Uint8Buffer; - UINT32 Uint32Buffer; - - // - // Select loop based on the width of the transfer - // - InStride = mInStride[Width]; - OutStride = mOutStride[Width]; - OperationWidth = (EFI_CPU_IO_PROTOCOL_WIDTH) (Width & 0x03); - for (Uint8Buffer = Buffer; Count > 0; Address += InStride, Uint8Buffer += OutStride, Count--) { - if (OperationWidth == EfiCpuIoWidthUint8) { - Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03))); - Uint32Buffer &= ~(UINT32)(0xFF << ((Address & 0x3) * 8)); - Uint32Buffer |= (UINT32)(*(UINT8 *)Uint8Buffer) << ((Address & 0x3) * 8); - MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer); - } else if (OperationWidth == EfiCpuIoWidthUint16) { - if (((Address & 0x3) == 1) || ((Address & 0x3) == 3)) { - return EFI_INVALID_PARAMETER; - } - Uint32Buffer = MmioRead32 ((UINTN)(Address & (~0x03))); - Uint32Buffer &= ~(UINT32)(0xFFFF << ((Address & 0x3) * 8)); - Uint32Buffer |= (UINT32)(*(UINT16 *)Uint8Buffer) << ((Address & 0x3) * 8); - MmioWrite32 ((UINTN)(Address & (~0x03)), Uint32Buffer); - } else if (OperationWidth == EfiCpuIoWidthUint32) { - MmioWrite32 ((UINTN)Address, *((UINT32 *)Uint8Buffer)); - } else if (OperationWidth == EfiCpuIoWidthUint64) { - MmioWrite64 ((UINTN)Address, *((UINT64 *)Uint8Buffer)); - } - } - return EFI_SUCCESS; -} - -/** - Enables a PCI driver to access PCI controller registers in a PCI root bridge's configuration space. - - The Pci.Read() and Pci.Write() functions enable a driver to access PCI configuration - registers for a PCI controller. - The PCI Configuration operations are carried out exactly as requested. The caller is responsible for - any alignment and PCI configuration width issues that a PCI Root Bridge on a platform might - require. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Width Signifies the width of the memory operations. - @param[in] Address The address within the PCI configuration space for the PCI controller. - @param[in] Count The number of PCI configuration operations to perform. Bytes - moved is Width size * Count, starting at Address. - @param[in] Buffer For read operations, the destination buffer to store the results. For - write operations, the source buffer to write data from. - - @retval EFI_SUCCESS The data was read from or written to the PCI root bridge. - @retval EFI_INVALID_PARAMETER Width is invalid for this PCI root bridge. - @retval EFI_INVALID_PARAMETER Buffer is NULL. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoPciWrite ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_WIDTH Width, - IN UINT64 EfiAddress, - IN UINTN Count, - IN VOID *Buffer - ) -{ - UINT32 Offset; - EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *EfiPciAddress; - UINT64 Address; - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - EfiPciAddress = (EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_PCI_ADDRESS *)&EfiAddress; - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Buffer == NULL) { - return EFI_INVALID_PARAMETER; - } - - if (Width >= EfiPciWidthMaximum) { - return EFI_INVALID_PARAMETER; - } - - if (EfiPciAddress->ExtendedRegister) - Offset = EfiPciAddress->ExtendedRegister; - else - Offset = EfiPciAddress->Register; - - PCIE_DEBUG ("[%a:%d] - bus %x dev %x func %x Off %x\n", __FUNCTION__, __LINE__, - EfiPciAddress->Bus, - EfiPciAddress->Device, - EfiPciAddress->Function, - Offset - ); - if (((EfiPciAddress->Bus == PrivateData->BusBase) && (EfiPciAddress->Device == 0x00) && (EfiPciAddress->Function == 0))){ - Address = PrivateData->RbPciBar + Offset; - if ((Offset == 0x14) || (Offset == 0x10)) { - return EFI_SUCCESS; - } - } - else if (EfiPciAddress->Bus == PrivateData->BusBase + 1) - { - if (!PcieIsLinkUp(PrivateData->SocType,PrivateData->RbPciBar, PrivateData->Port)) { - return EFI_NOT_READY; - } - Address = GetPcieCfgAddress ( - PrivateData->Ecam, - EfiPciAddress->Bus, - EfiPciAddress->Device, - EfiPciAddress->Function, - Offset - ); - } - else - { - Address = GetPcieCfgAddress ( - PrivateData->Ecam, - EfiPciAddress->Bus, - EfiPciAddress->Device, - EfiPciAddress->Function, - Offset - ); - } - - (VOID)CpuMemoryServiceWrite ((EFI_CPU_IO_PROTOCOL_WIDTH)Width, Address, Count, Buffer); - PCIE_DEBUG ("[%a:%d] - 0x%08x\n", __FUNCTION__, __LINE__, *(UINT32 *)Buffer); - return EFI_SUCCESS; -} - -/** - Provides the PCI controller-specific addresses required to access system memory from a - DMA bus master. - - The Map() function provides the PCI controller specific addresses needed to access system - memory. This function is used to map system memory for PCI bus master DMA accesses. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Operation Indicates if the bus master is going to read or write to system memory. - @param[in] HostAddress The system memory address to map to the PCI controller. - @param[in, out] NumberOfBytes On input the number of bytes to map. On output the number of bytes that were mapped. - @param[out] DeviceAddress The resulting map address for the bus master PCI controller to use - to access the system memory's HostAddress. - @param[out] Mapping The value to pass to Unmap() when the bus master DMA operation is complete. - - @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes. - @retval EFI_INVALID_PARAMETER Operation is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_INVALID_PARAMETER NumberOfBytes is NULL. - @retval EFI_INVALID_PARAMETER DeviceAddress is NULL. - @retval EFI_INVALID_PARAMETER Mapping is NULL. - @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer. - @retval EFI_DEVICE_ERROR The system hardware could not map the requested address. - @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoMap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL_OPERATION Operation, - IN VOID *HostAddress, - IN OUT UINTN *NumberOfBytes, - OUT EFI_PHYSICAL_ADDRESS *DeviceAddress, - OUT VOID **Mapping - ) -{ - DMA_MAP_OPERATION DmaOperation; - - if (Operation == EfiPciOperationBusMasterRead) { - DmaOperation = MapOperationBusMasterRead; - } else if (Operation == EfiPciOperationBusMasterWrite) { - DmaOperation = MapOperationBusMasterWrite; - } else if (Operation == EfiPciOperationBusMasterCommonBuffer) { - DmaOperation = MapOperationBusMasterCommonBuffer; - } else if (Operation == EfiPciOperationBusMasterRead64) { - DmaOperation = MapOperationBusMasterRead; - } else if (Operation == EfiPciOperationBusMasterWrite64) { - DmaOperation = MapOperationBusMasterWrite; - } else if (Operation == EfiPciOperationBusMasterCommonBuffer64) { - DmaOperation = MapOperationBusMasterCommonBuffer; - } else { - return EFI_INVALID_PARAMETER; - } - (VOID)DmaMap (DmaOperation, HostAddress, NumberOfBytes, DeviceAddress, Mapping); - return EFI_SUCCESS; -} - -/** - Completes the Map() operation and releases any corresponding resources. - - The Unmap() function completes the Map() operation and releases any corresponding resources. - If the operation was an EfiPciOperationBusMasterWrite or - EfiPciOperationBusMasterWrite64, the data is committed to the target system memory. - Any resources used for the mapping are freed. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Mapping The mapping value returned from Map(). - - @retval EFI_SUCCESS The range was unmapped. - @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map(). - @retval EFI_DEVICE_ERROR The data was not committed to the target system memory. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoUnmap ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN VOID *Mapping - ) -{ - return DmaUnmap (Mapping); -} - -/** - Allocates pages that are suitable for an EfiPciOperationBusMasterCommonBuffer or - EfiPciOperationBusMasterCommonBuffer64 mapping. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Type This parameter is not used and must be ignored. - @param MemoryType The type of memory to allocate, EfiBootServicesData or EfiRuntimeServicesData. - @param Pages The number of pages to allocate. - @param HostAddress A pointer to store the base system memory address of the allocated range. - @param Attributes The requested bit mask of attributes for the allocated range. Only - the attributes EFI_PCI_ATTRIBUTE_MEMORY_WRITE_COMBINE, EFI_PCI_ATTRIBUTE_MEMORY_CACHED, - and EFI_PCI_ATTRIBUTE_DUAL_ADDRESS_CYCLE may be used with this function. - - @retval EFI_SUCCESS The requested memory pages were allocated. - @retval EFI_INVALID_PARAMETER MemoryType is invalid. - @retval EFI_INVALID_PARAMETER HostAddress is NULL. - @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and DUAL_ADDRESS_CYCLE. - @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoAllocateBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN EFI_ALLOCATE_TYPE Type, - IN EFI_MEMORY_TYPE MemoryType, - IN UINTN Pages, - OUT VOID **HostAddress, - IN UINT64 Attributes - ) -{ - if (Attributes & EFI_PCI_ATTRIBUTE_INVALID_FOR_ALLOCATE_BUFFER) { - return EFI_UNSUPPORTED; - } - - return DmaAllocateBuffer (MemoryType, Pages, HostAddress); - -} - -/** - Frees memory that was allocated with AllocateBuffer(). - - The FreeBuffer() function frees memory that was allocated with AllocateBuffer(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Pages The number of pages to free. - @param HostAddress The base system memory address of the allocated range. - - @retval EFI_SUCCESS The requested memory pages were freed. - @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages - was not allocated with AllocateBuffer(). - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFreeBuffer ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINTN Pages, - OUT VOID *HostAddress - ) -{ - return DmaFreeBuffer (Pages, HostAddress); -} - -/** - Flushes all PCI posted write transactions from a PCI host bridge to system memory. - - The Flush() function flushes any PCI posted write transactions from a PCI host bridge to system - memory. Posted write transactions are generated by PCI bus masters when they perform write - transactions to target addresses in system memory. - This function does not flush posted write transactions from any PCI bridges. A PCI controller - specific action must be taken to guarantee that the posted write transactions have been flushed from - the PCI controller and from all the PCI bridges into the PCI host bridge. This is typically done with - a PCI read transaction from the PCI controller prior to calling Flush(). - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - - @retval EFI_SUCCESS The PCI posted write transactions were flushed from the PCI host - bridge to system memory. - @retval EFI_DEVICE_ERROR The PCI posted write transactions were not flushed from the PCI - host bridge due to a hardware error. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoFlush ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This - ) -{ - // - // not supported yet - // - return EFI_SUCCESS; -} - -/** - Gets the attributes that a PCI root bridge supports setting with SetAttributes(), and the - attributes that a PCI root bridge is currently using. - - The GetAttributes() function returns the mask of attributes that this PCI root bridge supports - and the mask of attributes that the PCI root bridge is currently using. - - @param This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param Supported A pointer to the mask of attributes that this PCI root bridge - supports setting with SetAttributes(). - @param Attributes A pointer to the mask of attributes that this PCI root bridge is - currently using. - - @retval EFI_SUCCESS If Supports is not NULL, then the attributes that the PCI root - bridge supports is returned in Supports. If Attributes is - not NULL, then the attributes that the PCI root bridge is currently - using is returned in Attributes. - @retval EFI_INVALID_PARAMETER Both Supports and Attributes are NULL. - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoGetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT UINT64 *Supported, - OUT UINT64 *Attributes - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Attributes == NULL && Supported == NULL) { - return EFI_INVALID_PARAMETER; - } - - // - // Set the return value for Supported and Attributes - // - if (Supported != NULL) { - *Supported = PrivateData->Supports; - } - - if (Attributes != NULL) { - *Attributes = PrivateData->Attributes; - } - - return EFI_SUCCESS; -} - -/** - Sets attributes for a resource range on a PCI root bridge. - - The SetAttributes() function sets the attributes specified in Attributes for the PCI root - bridge on the resource range specified by ResourceBase and ResourceLength. Since the - granularity of setting these attributes may vary from resource type to resource type, and from - platform to platform, the actual resource range and the one passed in by the caller may differ. As a - result, this function may set the attributes specified by Attributes on a larger resource range - than the caller requested. The actual range is returned in ResourceBase and - ResourceLength. The caller is responsible for verifying that the actual range for which the - attributes were set is acceptable. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[in] Attributes The mask of attributes to set. If the attribute bit - MEMORY_WRITE_COMBINE, MEMORY_CACHED, or - MEMORY_DISABLE is set, then the resource range is specified by - ResourceBase and ResourceLength. If - MEMORY_WRITE_COMBINE, MEMORY_CACHED, and - MEMORY_DISABLE are not set, then ResourceBase and - ResourceLength are ignored, and may be NULL. - @param[in, out] ResourceBase A pointer to the base address of the resource range to be modified - by the attributes specified by Attributes. - @param[in, out] ResourceLength A pointer to the length of the resource range to be modified by the - attributes specified by Attributes. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoSetAttributes ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - IN UINT64 Attributes, - IN OUT UINT64 *ResourceBase, - IN OUT UINT64 *ResourceLength - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS(This); - - if (Attributes != 0) { - if ((Attributes & (~(PrivateData->Supports))) != 0) { - return EFI_UNSUPPORTED; - } - } - - // - // This is a generic driver for a PC-AT class system. It does not have any - // chipset specific knowlegde, so none of the attributes can be set or - // cleared. Any attempt to set attribute that are already set will succeed, - // and any attempt to set an attribute that is not supported will fail. - // - if (Attributes & (~PrivateData->Attributes)) { - /* FIXME: */ - return EFI_UNSUPPORTED; - } - - return EFI_SUCCESS; -} - -/** - Retrieves the current resource settings of this PCI root bridge in the form of a set of ACPI 2.0 - resource descriptors. - - There are only two resource descriptor types from the ACPI Specification that may be used to - describe the current resources allocated to a PCI root bridge. These are the QWORD Address - Space Descriptor (ACPI 2.0 Section 6.4.3.5.1), and the End Tag (ACPI 2.0 Section 6.4.2.8). The - QWORD Address Space Descriptor can describe memory, I/O, and bus number ranges for dynamic - or fixed resources. The configuration of a PCI root bridge is described with one or more QWORD - Address Space Descriptors followed by an End Tag. - - @param[in] This A pointer to the EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL. - @param[out] Resources A pointer to the ACPI 2.0 resource descriptors that describe the - current configuration of this PCI root bridge. The storage for the - ACPI 2.0 resource descriptors is allocated by this function. The - caller must treat the return buffer as read-only data, and the buffer - must not be freed by the caller. - - @retval EFI_SUCCESS The current configuration of this PCI root bridge was returned in Resources. - @retval EFI_UNSUPPORTED The current configuration of this PCI root bridge could not be retrieved. - @retval EFI_INVALID_PARAMETER Invalid pointer of EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL - -**/ -EFI_STATUS -EFIAPI -RootBridgeIoConfiguration ( - IN EFI_PCI_ROOT_BRIDGE_IO_PROTOCOL *This, - OUT VOID **Resources - ) -{ - PCI_ROOT_BRIDGE_INSTANCE *PrivateData; - UINTN Index; - - PrivateData = DRIVER_INSTANCE_FROM_PCI_ROOT_BRIDGE_IO_THIS (This); - for (Index = 0; Index < TypeMax; Index++) { - if (PrivateData->ResAllocNode[Index].Status == ResAllocated) { - switch (Index) { - case TypeIo: - Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->IoBase; - break; - case TypeBus: - Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base; - break; - default: - /* PCIE Device bar address should be base on PciRegionBase */ - Configuration.SpaceDesp[Index].AddrRangeMin = PrivateData->ResAllocNode[Index].Base - PrivateData->MemBase + - PrivateData->PciRegionBase; - } - Configuration.SpaceDesp[Index].AddrRangeMax = Configuration.SpaceDesp[Index].AddrRangeMin + PrivateData->ResAllocNode[Index].Length - 1; - Configuration.SpaceDesp[Index].AddrLen = PrivateData->ResAllocNode[Index].Length; - Configuration.SpaceDesp[Index].AddrTranslationOffset = PrivateData->MemBase - PrivateData->PciRegionBase; - } - } - - *Resources = &Configuration; - return EFI_SUCCESS; -} -