| Message ID | 20180228192421.17684-1-ard.biesheuvel@linaro.org |
|---|---|
| Headers | show |
| Series | SynQuacer ACPI support | expand |
So, on the whole, I'm happy with this series. Some of the .asl looks to me like it could be made more readable with some additional #defines, but I may be oversimplifying. But I'd like someone with more ACPI experience to give an R-b for 3,5-7. With that provision, for the series: Reviewed-by: Leif Lindholm <leif.lindholm@linaro.org> On Wed, Feb 28, 2018 at 07:24:14PM +0000, Ard Biesheuvel wrote: > This implements ACPI support for the SynQuacer platforms. > > Changes since v1: > - improve commit log (#1, #2) > - replace bare numbers with symbolic constants (#2) > - add Leif's R-b (#4) > - add patches #6 and #7 > > Note that supporting ACPI on this SoC is non-trivial, due to the quirky > DesignWare RCs and the pre-ITS that sits between the PCIe RCs and the GICv3. > However, the most important issue has been addressed by modifying the static > SMMU mapping that sits between the CPUs and the PCIe config space, working > around the ghosting issue that occurs on these RCs, due the complete lack of > type 0 config TLP filtering by the [non-existent] root port. (This was tested > using the 20180226-LB1.1-ACPI-ramfw.bin SCP firmware image, which is not [yet] > installed by default on DeveloperBox hardware) > > That leaves the MSI issue, which is worked around by limiting MSI support to a > single RC. In the presented configuration, this is RC #1, which connects to the > x16 slot [and nothing else] on the DeveloperBox PCB. The onboard PCIe devices > (XHCI + SATA) work without problem using wired interrupts only, and so RC #0 > has MSI support disabled. This means cards that require MSI support should > be inserted into the x16 slot, which is likely to be the preferred slot in > such cases anwyay (e.g., when using NVME or high end networking plugin cards) > > Patch #1 fixes a minor issue in the slot-to-BDF mapping. > > Patch #2 modifies the static PCIe window configuration so it can be described > using ACPI as well as DT. > > Patch #3 introduces the static ACPI tables that describe the fixed platform > devices and peripherals to the OS. > > Patch #4 adds a menu option to the platform driver to make ACPI vs DT user > selectable. > > Patch #5 adds support for describing the eMMC controller using a SSDT table > which is only installed if eMMC support is enabled. > > Patch #6 adds a _STA method implementation to the PCIe RC devices so that > they are only exposed to the OS when running on a platform that has one of > the several ECAM workarounds enabled. Otherwise, we can still boot via ACPI > using platform devices, but the PCIe RCs are unavailable. > > Patch #7 extends the _STA method for PCI0 to take the presence detect GPIO > into account. This is necessary because on the SynQuacer evaluation board, > any attempt to access the device registers will lock up the system if no > card is inserted into the slot. > > Note that driver support for the eMMC and network controller only landed in > v4.15, but when using a SATA driver and a plugin network card that does have > driver support, these patches should allow the SynQuacer based platforms to > boot stock Debian Stretch/Fedora/Centos etc installers. > > Ard Biesheuvel (7): > Platform/Socionext/DeveloperBox: fix PCIe slot to B/D/F mapping > Silicon/SynQuacer: tweak PCI I/O windows for ACPI/Linux support > Silicon/SynQuacer: add ACPI drivers and tables > Silicon/SynQuacer/PlatformDxe: add option to enable ACPI mode > Silicon/SynQuacer/PlatformDxe: add ACPI description of eMMC > Silicon/SynQuacer/AcpiTables: disable PCI RCs if ECAM ghosts are > detected > Silicon/SynQuacer/AcpiTables: take presence detect of PCI0 into > account > > Platform/Socionext/DeveloperBox/DeveloperBox.dsc | 2 + > Platform/Socionext/DeveloperBox/DeveloperBox.fdf | 14 + > Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc | 2 + > Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf | 14 + > Silicon/Socionext/SynQuacer/Acpi.dsc.inc | 48 +++ > Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl | 317 ++++++++++++++++++++ > Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.h | 73 +++++ > Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf | 65 ++++ > Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl | 187 ++++++++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Fadt.aslc | 91 ++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Gtdt.aslc | 93 ++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Iort.aslc | 101 +++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Madt.aslc | 182 +++++++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Mcfg.aslc | 63 ++++ > Silicon/Socionext/SynQuacer/AcpiTables/Spcr.aslc | 128 ++++++++ > Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 2 +- > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.asl | 41 +++ > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.c | 55 ++++ > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c | 32 +- > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.h | 4 + > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf | 5 + > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxeHii.uni | 8 +- > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxeHii.vfr | 10 +- > Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h | 22 +- > Silicon/Socionext/SynQuacer/Include/Platform/VarStore.h | 8 +- > Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c | 4 +- > 26 files changed, 1546 insertions(+), 25 deletions(-) > create mode 100644 Silicon/Socionext/SynQuacer/Acpi.dsc.inc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.h > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Fadt.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Gtdt.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Iort.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Madt.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Mcfg.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Spcr.aslc > create mode 100644 Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.asl > > -- > 2.11.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On Wed, Feb 28, 2018 at 07:24:14PM +0000, Ard Biesheuvel wrote: > This implements ACPI support for the SynQuacer platforms. > > Changes since v1: > - improve commit log (#1, #2) > - replace bare numbers with symbolic constants (#2) > - add Leif's R-b (#4) > - add patches #6 and #7 > > Note that supporting ACPI on this SoC is non-trivial, due to the quirky > DesignWare RCs and the pre-ITS that sits between the PCIe RCs and the GICv3. > However, the most important issue has been addressed by modifying the static > SMMU mapping that sits between the CPUs and the PCIe config space, working > around the ghosting issue that occurs on these RCs, due the complete lack of > type 0 config TLP filtering by the [non-existent] root port. (This was tested > using the 20180226-LB1.1-ACPI-ramfw.bin SCP firmware image, which is not [yet] > installed by default on DeveloperBox hardware) > > That leaves the MSI issue, which is worked around by limiting MSI support to a > single RC. In the presented configuration, this is RC #1, which connects to the > x16 slot [and nothing else] on the DeveloperBox PCB. The onboard PCIe devices > (XHCI + SATA) work without problem using wired interrupts only, and so RC #0 > has MSI support disabled. This means cards that require MSI support should > be inserted into the x16 slot, which is likely to be the preferred slot in > such cases anwyay (e.g., when using NVME or high end networking plugin cards) > > Patch #1 fixes a minor issue in the slot-to-BDF mapping. > > Patch #2 modifies the static PCIe window configuration so it can be described > using ACPI as well as DT. > > Patch #3 introduces the static ACPI tables that describe the fixed platform > devices and peripherals to the OS. > > Patch #4 adds a menu option to the platform driver to make ACPI vs DT user > selectable. > > Patch #5 adds support for describing the eMMC controller using a SSDT table > which is only installed if eMMC support is enabled. > > Patch #6 adds a _STA method implementation to the PCIe RC devices so that > they are only exposed to the OS when running on a platform that has one of > the several ECAM workarounds enabled. Otherwise, we can still boot via ACPI > using platform devices, but the PCIe RCs are unavailable. > > Patch #7 extends the _STA method for PCI0 to take the presence detect GPIO > into account. This is necessary because on the SynQuacer evaluation board, > any attempt to access the device registers will lock up the system if no > card is inserted into the slot. > > Note that driver support for the eMMC and network controller only landed in > v4.15, but when using a SATA driver and a plugin network card that does have > driver support, these patches should allow the SynQuacer based platforms to > boot stock Debian Stretch/Fedora/Centos etc installers. > The ACPI parts look good to me. Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> > Ard Biesheuvel (7): > Platform/Socionext/DeveloperBox: fix PCIe slot to B/D/F mapping > Silicon/SynQuacer: tweak PCI I/O windows for ACPI/Linux support > Silicon/SynQuacer: add ACPI drivers and tables > Silicon/SynQuacer/PlatformDxe: add option to enable ACPI mode > Silicon/SynQuacer/PlatformDxe: add ACPI description of eMMC > Silicon/SynQuacer/AcpiTables: disable PCI RCs if ECAM ghosts are > detected > Silicon/SynQuacer/AcpiTables: take presence detect of PCI0 into > account > > Platform/Socionext/DeveloperBox/DeveloperBox.dsc | 2 + > Platform/Socionext/DeveloperBox/DeveloperBox.fdf | 14 + > Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc | 2 + > Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf | 14 + > Silicon/Socionext/SynQuacer/Acpi.dsc.inc | 48 +++ > Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl | 317 ++++++++++++++++++++ > Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.h | 73 +++++ > Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf | 65 ++++ > Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl | 187 ++++++++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Fadt.aslc | 91 ++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Gtdt.aslc | 93 ++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Iort.aslc | 101 +++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Madt.aslc | 182 +++++++++++ > Silicon/Socionext/SynQuacer/AcpiTables/Mcfg.aslc | 63 ++++ > Silicon/Socionext/SynQuacer/AcpiTables/Spcr.aslc | 128 ++++++++ > Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 2 +- > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.asl | 41 +++ > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.c | 55 ++++ > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c | 32 +- > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.h | 4 + > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf | 5 + > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxeHii.uni | 8 +- > Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxeHii.vfr | 10 +- > Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h | 22 +- > Silicon/Socionext/SynQuacer/Include/Platform/VarStore.h | 8 +- > Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c | 4 +- > 26 files changed, 1546 insertions(+), 25 deletions(-) > create mode 100644 Silicon/Socionext/SynQuacer/Acpi.dsc.inc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.h > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Fadt.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Gtdt.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Iort.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Madt.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Mcfg.aslc > create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Spcr.aslc > create mode 100644 Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.asl > > -- > 2.11.0 > _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 1 March 2018 at 11:23, Graeme Gregory (Linaro) <graeme.gregory@linaro.org> wrote: > On Wed, Feb 28, 2018 at 07:24:14PM +0000, Ard Biesheuvel wrote: >> This implements ACPI support for the SynQuacer platforms. >> >> Changes since v1: >> - improve commit log (#1, #2) >> - replace bare numbers with symbolic constants (#2) >> - add Leif's R-b (#4) >> - add patches #6 and #7 >> >> Note that supporting ACPI on this SoC is non-trivial, due to the quirky >> DesignWare RCs and the pre-ITS that sits between the PCIe RCs and the GICv3. >> However, the most important issue has been addressed by modifying the static >> SMMU mapping that sits between the CPUs and the PCIe config space, working >> around the ghosting issue that occurs on these RCs, due the complete lack of >> type 0 config TLP filtering by the [non-existent] root port. (This was tested >> using the 20180226-LB1.1-ACPI-ramfw.bin SCP firmware image, which is not [yet] >> installed by default on DeveloperBox hardware) >> >> That leaves the MSI issue, which is worked around by limiting MSI support to a >> single RC. In the presented configuration, this is RC #1, which connects to the >> x16 slot [and nothing else] on the DeveloperBox PCB. The onboard PCIe devices >> (XHCI + SATA) work without problem using wired interrupts only, and so RC #0 >> has MSI support disabled. This means cards that require MSI support should >> be inserted into the x16 slot, which is likely to be the preferred slot in >> such cases anwyay (e.g., when using NVME or high end networking plugin cards) >> >> Patch #1 fixes a minor issue in the slot-to-BDF mapping. >> >> Patch #2 modifies the static PCIe window configuration so it can be described >> using ACPI as well as DT. >> >> Patch #3 introduces the static ACPI tables that describe the fixed platform >> devices and peripherals to the OS. >> >> Patch #4 adds a menu option to the platform driver to make ACPI vs DT user >> selectable. >> >> Patch #5 adds support for describing the eMMC controller using a SSDT table >> which is only installed if eMMC support is enabled. >> >> Patch #6 adds a _STA method implementation to the PCIe RC devices so that >> they are only exposed to the OS when running on a platform that has one of >> the several ECAM workarounds enabled. Otherwise, we can still boot via ACPI >> using platform devices, but the PCIe RCs are unavailable. >> >> Patch #7 extends the _STA method for PCI0 to take the presence detect GPIO >> into account. This is necessary because on the SynQuacer evaluation board, >> any attempt to access the device registers will lock up the system if no >> card is inserted into the slot. >> >> Note that driver support for the eMMC and network controller only landed in >> v4.15, but when using a SATA driver and a plugin network card that does have >> driver support, these patches should allow the SynQuacer based platforms to >> boot stock Debian Stretch/Fedora/Centos etc installers. >> > > The ACPI parts look good to me. > > Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> > Cheers. I'll hold off on merging this until Heyi's PciHostBridgeDxe patches are in (which are in pretty good shape now) _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 1 March 2018 at 11:24, Ard Biesheuvel <ard.biesheuvel@linaro.org> wrote: > On 1 March 2018 at 11:23, Graeme Gregory (Linaro) > <graeme.gregory@linaro.org> wrote: >> On Wed, Feb 28, 2018 at 07:24:14PM +0000, Ard Biesheuvel wrote: >>> This implements ACPI support for the SynQuacer platforms. >>> >>> Changes since v1: >>> - improve commit log (#1, #2) >>> - replace bare numbers with symbolic constants (#2) >>> - add Leif's R-b (#4) >>> - add patches #6 and #7 >>> >>> Note that supporting ACPI on this SoC is non-trivial, due to the quirky >>> DesignWare RCs and the pre-ITS that sits between the PCIe RCs and the GICv3. >>> However, the most important issue has been addressed by modifying the static >>> SMMU mapping that sits between the CPUs and the PCIe config space, working >>> around the ghosting issue that occurs on these RCs, due the complete lack of >>> type 0 config TLP filtering by the [non-existent] root port. (This was tested >>> using the 20180226-LB1.1-ACPI-ramfw.bin SCP firmware image, which is not [yet] >>> installed by default on DeveloperBox hardware) >>> >>> That leaves the MSI issue, which is worked around by limiting MSI support to a >>> single RC. In the presented configuration, this is RC #1, which connects to the >>> x16 slot [and nothing else] on the DeveloperBox PCB. The onboard PCIe devices >>> (XHCI + SATA) work without problem using wired interrupts only, and so RC #0 >>> has MSI support disabled. This means cards that require MSI support should >>> be inserted into the x16 slot, which is likely to be the preferred slot in >>> such cases anwyay (e.g., when using NVME or high end networking plugin cards) >>> >>> Patch #1 fixes a minor issue in the slot-to-BDF mapping. >>> >>> Patch #2 modifies the static PCIe window configuration so it can be described >>> using ACPI as well as DT. >>> >>> Patch #3 introduces the static ACPI tables that describe the fixed platform >>> devices and peripherals to the OS. >>> >>> Patch #4 adds a menu option to the platform driver to make ACPI vs DT user >>> selectable. >>> >>> Patch #5 adds support for describing the eMMC controller using a SSDT table >>> which is only installed if eMMC support is enabled. >>> >>> Patch #6 adds a _STA method implementation to the PCIe RC devices so that >>> they are only exposed to the OS when running on a platform that has one of >>> the several ECAM workarounds enabled. Otherwise, we can still boot via ACPI >>> using platform devices, but the PCIe RCs are unavailable. >>> >>> Patch #7 extends the _STA method for PCI0 to take the presence detect GPIO >>> into account. This is necessary because on the SynQuacer evaluation board, >>> any attempt to access the device registers will lock up the system if no >>> card is inserted into the slot. >>> >>> Note that driver support for the eMMC and network controller only landed in >>> v4.15, but when using a SATA driver and a plugin network card that does have >>> driver support, these patches should allow the SynQuacer based platforms to >>> boot stock Debian Stretch/Fedora/Centos etc installers. >>> >> >> The ACPI parts look good to me. >> >> Reviewed-by: Graeme Gregory <graeme.gregory@linaro.org> >> > > Cheers. > > I'll hold off on merging this until Heyi's PciHostBridgeDxe patches > are in (which are in pretty good shape now) Series applies as d9c87c711412..f8acbb73fae6 Thanks all _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
This implements ACPI support for the SynQuacer platforms. Changes since v1: - improve commit log (#1, #2) - replace bare numbers with symbolic constants (#2) - add Leif's R-b (#4) - add patches #6 and #7 Note that supporting ACPI on this SoC is non-trivial, due to the quirky DesignWare RCs and the pre-ITS that sits between the PCIe RCs and the GICv3. However, the most important issue has been addressed by modifying the static SMMU mapping that sits between the CPUs and the PCIe config space, working around the ghosting issue that occurs on these RCs, due the complete lack of type 0 config TLP filtering by the [non-existent] root port. (This was tested using the 20180226-LB1.1-ACPI-ramfw.bin SCP firmware image, which is not [yet] installed by default on DeveloperBox hardware) That leaves the MSI issue, which is worked around by limiting MSI support to a single RC. In the presented configuration, this is RC #1, which connects to the x16 slot [and nothing else] on the DeveloperBox PCB. The onboard PCIe devices (XHCI + SATA) work without problem using wired interrupts only, and so RC #0 has MSI support disabled. This means cards that require MSI support should be inserted into the x16 slot, which is likely to be the preferred slot in such cases anwyay (e.g., when using NVME or high end networking plugin cards) Patch #1 fixes a minor issue in the slot-to-BDF mapping. Patch #2 modifies the static PCIe window configuration so it can be described using ACPI as well as DT. Patch #3 introduces the static ACPI tables that describe the fixed platform devices and peripherals to the OS. Patch #4 adds a menu option to the platform driver to make ACPI vs DT user selectable. Patch #5 adds support for describing the eMMC controller using a SSDT table which is only installed if eMMC support is enabled. Patch #6 adds a _STA method implementation to the PCIe RC devices so that they are only exposed to the OS when running on a platform that has one of the several ECAM workarounds enabled. Otherwise, we can still boot via ACPI using platform devices, but the PCIe RCs are unavailable. Patch #7 extends the _STA method for PCI0 to take the presence detect GPIO into account. This is necessary because on the SynQuacer evaluation board, any attempt to access the device registers will lock up the system if no card is inserted into the slot. Note that driver support for the eMMC and network controller only landed in v4.15, but when using a SATA driver and a plugin network card that does have driver support, these patches should allow the SynQuacer based platforms to boot stock Debian Stretch/Fedora/Centos etc installers. Ard Biesheuvel (7): Platform/Socionext/DeveloperBox: fix PCIe slot to B/D/F mapping Silicon/SynQuacer: tweak PCI I/O windows for ACPI/Linux support Silicon/SynQuacer: add ACPI drivers and tables Silicon/SynQuacer/PlatformDxe: add option to enable ACPI mode Silicon/SynQuacer/PlatformDxe: add ACPI description of eMMC Silicon/SynQuacer/AcpiTables: disable PCI RCs if ECAM ghosts are detected Silicon/SynQuacer/AcpiTables: take presence detect of PCI0 into account Platform/Socionext/DeveloperBox/DeveloperBox.dsc | 2 + Platform/Socionext/DeveloperBox/DeveloperBox.fdf | 14 + Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.dsc | 2 + Platform/Socionext/SynQuacerEvalBoard/SynQuacerEvalBoard.fdf | 14 + Silicon/Socionext/SynQuacer/Acpi.dsc.inc | 48 +++ Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl | 317 ++++++++++++++++++++ Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.h | 73 +++++ Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf | 65 ++++ Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl | 187 ++++++++++++ Silicon/Socionext/SynQuacer/AcpiTables/Fadt.aslc | 91 ++++++ Silicon/Socionext/SynQuacer/AcpiTables/Gtdt.aslc | 93 ++++++ Silicon/Socionext/SynQuacer/AcpiTables/Iort.aslc | 101 +++++++ Silicon/Socionext/SynQuacer/AcpiTables/Madt.aslc | 182 +++++++++++ Silicon/Socionext/SynQuacer/AcpiTables/Mcfg.aslc | 63 ++++ Silicon/Socionext/SynQuacer/AcpiTables/Spcr.aslc | 128 ++++++++ Silicon/Socionext/SynQuacer/DeviceTree/SynQuacer.dtsi | 2 +- Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.asl | 41 +++ Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.c | 55 ++++ Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.c | 32 +- Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.h | 4 + Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxe.inf | 5 + Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxeHii.uni | 8 +- Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/PlatformDxeHii.vfr | 10 +- Silicon/Socionext/SynQuacer/Include/Platform/Pcie.h | 22 +- Silicon/Socionext/SynQuacer/Include/Platform/VarStore.h | 8 +- Silicon/Socionext/SynQuacer/Library/SynQuacerPciHostBridgeLib/SynQuacerPciHostBridgeLibConstructor.c | 4 +- 26 files changed, 1546 insertions(+), 25 deletions(-) create mode 100644 Silicon/Socionext/SynQuacer/Acpi.dsc.inc create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiSsdtRootPci.asl create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.h create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/AcpiTables.inf create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Dsdt.asl create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Fadt.aslc create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Gtdt.aslc create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Iort.aslc create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Madt.aslc create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Mcfg.aslc create mode 100644 Silicon/Socionext/SynQuacer/AcpiTables/Spcr.aslc create mode 100644 Silicon/Socionext/SynQuacer/Drivers/PlatformDxe/Emmc.asl -- 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel