diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 12ec6c71dc..67d1adea2d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -107,7 +107,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
 dtb-$(CONFIG_ROCKCHIP_RK3328) += \
 	rk3328-evb.dtb \
 	rk3328-roc-cc.dtb \
-	rk3328-rock64.dtb
+	rk3328-rock64.dtb \
+	rk3328-rock-pi-e.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3368) += \
 	rk3368-lion.dtb \
diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
new file mode 100644
index 0000000000..bf5b1f3adc
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr3-666.dtsi"
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+	u-boot,dm-spl;
+};
+
+&usb_host0_xhci {
+	vbus-supply = <&vcc5v0_host_xhci>;
+	status = "okay";
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts
new file mode 100644
index 0000000000..21656b64a2
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock-pi-e.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Radxa Rockpi E";
+	compatible = "radxa,rock-pi-e", "rockchip,rk3328";
+
+	chosen {
+	stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+	compatible = "fixed-clock";
+	clock-frequency = <125000000>;
+	clock-output-names = "gmac_clkin";
+	#clock-cells = <0>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+	compatible = "regulator-fixed";
+	gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0m1_gpio>;
+	regulator-name = "vcc_sd";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+	compatible = "regulator-fixed";
+	enable-active-high;
+	regulator-name = "vcc5v0_host_xhci";
+	gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_sys: vcc-sys {
+	compatible = "regulator-fixed";
+	regulator-name = "vcc_sys";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	supports-emmc;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805 at 18 {
+	compatible = "rockchip,rk805";
+	status = "okay";
+	reg = <0x18>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+	#clock-cells = <1>;
+	clock-output-names = "xin32k", "rk805-clkout2";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+	rockchip,system-power-controller;
+	wakeup-source;
+
+	vcc1-supply = <&vcc_sys>;
+	vcc2-supply = <&vcc_sys>;
+	vcc3-supply = <&vcc_sys>;
+	vcc4-supply = <&vcc_sys>;
+	vcc5-supply = <&vcc_io>;
+	vcc6-supply = <&vcc_sys>;
+
+	regulators {
+	vdd_logic: DCDC_REG1 {
+	regulator-name = "vdd_logic";
+	regulator-min-microvolt = <712500>;
+	regulator-max-microvolt = <1450000>;
+	regulator-ramp-delay = <12500>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1000000>;
+	};
+	};
+
+	vdd_arm: DCDC_REG2 {
+	regulator-name = "vdd_arm";
+	regulator-min-microvolt = <712500>;
+	regulator-max-microvolt = <1450000>;
+	regulator-ramp-delay = <12500>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <950000>;
+	};
+	};
+
+	vcc_ddr: DCDC_REG3 {
+	regulator-name = "vcc_ddr";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	};
+	};
+
+	vcc_io: DCDC_REG4 {
+	regulator-name = "vcc_io";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <3300000>;
+	};
+	};
+
+	vcc_18: LDO_REG1 {
+	regulator-name = "vcc_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1800000>;
+	};
+	};
+
+	vcc18_emmc: LDO_REG2 {
+	regulator-name = "vcc18_emmc";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1800000>;
+	};
+	};
+
+	vdd_10: LDO_REG3 {
+	regulator-name = "vdd_10";
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1000000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1000000>;
+	};
+	};
+	};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_io>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	pmic {
+	pmic_int_l: pmic-int-l {
+	rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+	};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	max-frequency = <150000000>;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	supports-sd;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
