From patchwork Fri Jan 31 13:07:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ian Ray X-Patchwork-Id: 240509 List-Id: U-Boot discussion From: ian.ray at ge.com (Ian Ray) Date: Fri, 31 Jan 2020 15:07:56 +0200 Subject: [U-Boot, 05/13] board: ge: mx53ppd: add i2c eeprom bootcount storage In-Reply-To: References: Message-ID: From: Robert Beckett Add bootcount node, linking to i2c eeprom "bootcount" partitions for storage. Enable i2c eeprom bootcount backend storage. Enable bootcount command and use it for failbootcmd. Signed-off-by: Robert Beckett --- arch/arm/dts/imx53-ppd-uboot.dtsi | 7 ++++++- configs/mx53ppd_defconfig | 6 +++--- include/configs/mx53ppd.h | 4 +--- 3 files changed, 10 insertions(+), 7 deletions(-) diff --git a/arch/arm/dts/imx53-ppd-uboot.dtsi b/arch/arm/dts/imx53-ppd-uboot.dtsi index 8e45ee7..0f81947 100644 --- a/arch/arm/dts/imx53-ppd-uboot.dtsi +++ b/arch/arm/dts/imx53-ppd-uboot.dtsi @@ -9,6 +9,11 @@ compatible = "wdt-reboot"; wdt = <&wdog1>; }; + + bootcount { + compatible = "u-boot,bootcount-i2c-eeprom"; + i2c-eeprom = <&bootcount>; + }; }; &eeprom { @@ -20,7 +25,7 @@ size = <1022>; }; - bootcount { + bootcount: bootcount { offset = <1022>; size = <2>; }; diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 4b479ae..0d499a3 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -5,7 +5,6 @@ CONFIG_TARGET_MX53PPD=y CONFIG_ENV_SIZE=0x2800 CONFIG_ENV_OFFSET=0xC0000 CONFIG_NR_DRAM_BANKS=2 -CONFIG_SYS_BOOTCOUNT_ADDR=0x7000A000 CONFIG_FIT=y CONFIG_OF_BOARD_SETUP=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ge/mx53ppd/imximage.cfg" @@ -22,6 +21,7 @@ CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_USB=y CONFIG_CMD_DHCP=y +CONFIG_CMD_BOOTCOUNT=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y CONFIG_CMD_EXT2=y @@ -35,9 +35,9 @@ CONFIG_ENV_IS_IN_MMC=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_DM=y CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_EXT=y +CONFIG_DM_BOOTCOUNT=y +CONFIG_DM_BOOTCOUNT_I2C_EEPROM=y CONFIG_BOOTCOUNT_BOOTLIMIT=10 -CONFIG_SYS_BOOTCOUNT_EXT_DEVPART="0:5" CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_MXC=y diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index a11b085..e7eca82 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -98,9 +98,7 @@ "setenv stdout vga; " \ "echo \"\n\n\n\n \" $msg; " \ "setenv stdout serial; " \ - "mw.b 0x7000A000 0xbc; " \ - "mw.b 0x7000A001 0x00; " \ - "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \ + "bootcount reset; \0" \ "altbootcmd=" \ "run doquiet; " \ "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \