@@ -745,8 +745,38 @@ source "dts/Kconfig"
source "env/Kconfig"
+menu Networking
+
+choice
+ prompt "Networking stack"
+ default NET
+
+config NO_NET
+ bool "No networking support"
+
+config NET
+ bool "Legacy U-Boot networking stack"
+ imply NETDEVICES
+
+config NET_LWIP
+ bool "Use lwIP for networking stack"
+ imply NETDEVICES
+ depends on !SANDBOX
+ help
+ Include networking support based on the lwIP (lightweight IP)
+ TCP/IP stack (https://nongnu.org/lwip). This is a replacement for
+ the default U-Boot network stack and applications located in net/
+ and enabled via CONFIG_NET as well as other pieces of code that
+ depend on CONFIG_NET (such as cmd/net.c enabled via CONFIG_CMD_NET).
+ Therefore the two symbols CONFIG_NET and CONFIG_NET_LWIP are mutually
+ exclusive.
+
+endchoice
+
source "net/Kconfig"
+endmenu
+
source "drivers/Kconfig"
source "fs/Kconfig"
@@ -424,7 +424,7 @@ config LOGF_FUNC_PAD
config LOG_SYSLOG
bool "Log output to syslog server"
- depends on NET
+ depends on NET || NET_LWIP
help
Enables a log driver which broadcasts log records via UDP port 514
to syslog servers.
@@ -1063,6 +1063,7 @@ config SPL_DM_SPI_FLASH
config SPL_NET
bool "Support networking"
+ depends on !NET_LWIP
help
Enable support for network devices (such as Ethernet) in SPL.
This permits SPL to load U-Boot over a network link rather than
@@ -20,6 +20,7 @@ config DFU_WRITE_ALT
config DFU_TFTP
bool "DFU via TFTP"
depends on NETDEVICES
+ depends on !NET_LWIP
select UPDATE_COMMON
select DFU_OVER_TFTP
help
@@ -1,5 +1,6 @@
menu "Fastboot support"
depends on CMDLINE
+ depends on !NET_LWIP
config FASTBOOT
bool
@@ -48,6 +48,7 @@ config DM_DSA
bool "Enable Driver Model for DSA switches"
depends on DM_MDIO
depends on PHY_FIXED
+ depends on !NET_LWIP
help
Enable driver model for DSA switches
@@ -11,7 +11,7 @@ config MV88E6352_SWITCH
menuconfig PHYLIB
bool "Ethernet PHY (physical media interface) support"
- depends on NET
+ depends on NET || NET_LWIP
help
Enable Ethernet PHY (physical media interface) support.
@@ -224,7 +224,7 @@ endif # USB_GADGET_DOWNLOAD
config USB_ETHER
bool "USB Ethernet Gadget"
- depends on NET
+ depends on NET || NET_LWIP
default y if ARCH_SUNXI && USB_MUSB_GADGET
help
Creates an Ethernet network device through a USB peripheral
@@ -2,11 +2,6 @@
# Network configuration
#
-menuconfig NET
- bool "Networking support"
- default y
- imply NETDEVICES
-
if NET
config ARP_TIMEOUT
@@ -26,15 +21,6 @@ config PROT_UDP
Enable a generic udp framework that allows defining a custom
handler for udp protocol.
-config BOOTDEV_ETH
- bool "Enable bootdev for ethernet"
- depends on BOOTSTD
- default y
- help
- Provide a bootdev for ethernet so that is it possible to boot
- an operationg system over the network, using the PXE (Preboot
- Execution Environment) protocol.
-
config BOOTP_SEND_HOSTNAME
bool "Send hostname to DNS server"
help
@@ -45,15 +31,6 @@ config BOOTP_SEND_HOSTNAME
of the "hostname" environment variable is passed as
option 12 to the DHCP server.
-config NET_RANDOM_ETHADDR
- bool "Random ethaddr if unset"
- help
- Selecting this will allow the Ethernet interface to function even
- when the ethaddr variable for that interface is unset. In this case,
- a random MAC address in the locally administered address space is
- generated. It will be saved to the appropriate environment variable,
- too.
-
config NETCONSOLE
bool "NetConsole support"
help
@@ -255,11 +232,35 @@ config IPV6
endif # if NET
+source "net/lwip/Kconfig"
+
+if NET || NET_LWIP
+
+config BOOTDEV_ETH
+ bool "Enable bootdev for ethernet"
+ depends on BOOTSTD
+ default y
+ help
+ Provide a bootdev for ethernet so that is it possible to boot
+ an operating system over the network, using the PXE (Preboot
+ Execution Environment) protocol.
+
+config NET_RANDOM_ETHADDR
+ bool "Random ethaddr if unset"
+ help
+ Selecting this will allow the Ethernet interface to function even
+ when the ethaddr variable for that interface is unset. In this case,
+ a random MAC address in the locally administered address space is
+ generated. It will be saved to the appropriate environment variable,
+ too.
+
+endif # if NET || NET_LWIP
+
config SYS_RX_ETH_BUFFER
- int "Number of receive packet buffers"
- default 4
- help
- Defines the number of Ethernet receive buffers. On some Ethernet
- controllers it is recommended to set this value to 8 or even higher,
- since all buffers can be full shortly after enabling the interface on
- high Ethernet traffic.
+ int "Number of receive packet buffers"
+ default 4
+ help
+ Defines the number of Ethernet receive buffers. On some Ethernet
+ controllers it is recommended to set this value to 8 or even higher,
+ since all buffers can be full shortly after enabling the interface on
+ high Ethernet traffic.
@@ -5,6 +5,8 @@
#ccflags-y += -DDEBUG
+ifeq ($(CONFIG_NET),y)
+
obj-$(CONFIG_NET) += arp.o
obj-$(CONFIG_CMD_BOOTP) += bootp.o
obj-$(CONFIG_CMD_CDP) += cdp.o
@@ -38,3 +40,5 @@ obj-$(CONFIG_CMD_WGET) += wget.o
# sprintf(buf, index ? "foo%d" : "foo", index)
# and this is intentional usage.
CFLAGS_eth_common.o += -Wno-format-extra-args
+
+endif
new file mode 100644
@@ -0,0 +1,34 @@
+#
+# Network configuration (with lwIP stack)
+#
+
+config LWIP_DEBUG
+ bool "Enable debug traces in the lwIP library"
+
+config LWIP_ASSERT
+ bool "Enable assertions in the lwIP library"
+
+config PROT_DHCP_LWIP
+ bool
+ select PROT_UDP_LWIP
+
+config PROT_DNS_LWIP
+ bool
+ select PROT_UDP_LWIP
+
+config PROT_RAW_LWIP
+ bool
+
+config PROT_TCP_LWIP
+ bool
+
+config PROT_TCP_SACK_LWIP
+ bool "TCP SACK support"
+ depends on PROT_TCP_LWIP
+ default y
+ help
+ TCP protocol with selective acknowledgements. Improves
+ file transfer speed in wget.
+
+config PROT_UDP_LWIP
+ bool
Prepare the introduction of the lwIP (lightweight IP) TCP/IP stack by adding a new net/lwip/ directory and the NET_LWIP symbol. Network support is either NO_NET, NET (legacy stack) or NET_LWIP. Subsequent commits will introduce the lwIP code, re-work the NETDEVICE integration and port some of the NET commands and features to lwIP. SPL_NET cannot be enabled when NET_LWIP=y. SPL_NET pulls some symbols that are part of NET (such as arp_init(), arp_timeout_check(), arp_receive(), net_arp_wait_packet_ip()). lwIP support in SPL may be added later. Similarly, DFU_TFTP and FASTBOOT are not compatible with NET_LWIP because of dependencies on net_loop(), tftp_timeout_ms, tftp_timeout_count_max and other NET things. Let's add a dependency on !NET_LWIP for now. As for SANDBOX, NET_LWIP cannot be used either because of strong assumptions on the network stack. Make NET_LWIP depend on !SANDBOX so that the NET_LWIP alternative is not visible in make menuconfig when sandbox_defconfig is used. Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> --- Kconfig | 30 +++++++++++++++++++ common/Kconfig | 2 +- common/spl/Kconfig | 1 + drivers/dfu/Kconfig | 1 + drivers/fastboot/Kconfig | 1 + drivers/net/Kconfig | 1 + drivers/net/phy/Kconfig | 2 +- drivers/usb/gadget/Kconfig | 2 +- net/Kconfig | 61 +++++++++++++++++++------------------- net/Makefile | 4 +++ net/lwip/Kconfig | 34 +++++++++++++++++++++ 11 files changed, 106 insertions(+), 33 deletions(-) create mode 100644 net/lwip/Kconfig