From patchwork Fri May 22 10:44:10 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michal Simek X-Patchwork-Id: 246246 List-Id: U-Boot discussion From: michal.simek at xilinx.com (Michal Simek) Date: Fri, 22 May 2020 12:44:10 +0200 Subject: [PATCH 6/7] mmc: zynq_sdhci: Add clock phase delays for Versal In-Reply-To: References: Message-ID: <685bf56ecd85efe366e5a71916f209e0617a6ec0.1590144247.git.michal.simek@xilinx.com> From: Ashok Reddy Soma Define default values for input and output clock phase delays for Versal. Also define functions for setting tapdelays based on these clock phase delays. Signed-off-by: Ashok Reddy Soma Signed-off-by: Michal Simek --- drivers/mmc/zynq_sdhci.c | 160 ++++++++++++++++++++++++++++++++++++++- 1 file changed, 156 insertions(+), 4 deletions(-) diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 1e7b79906f88..91ec552119d1 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -19,6 +19,12 @@ #include #include +#define SDHCI_ARASAN_ITAPDLY_REGISTER 0xF0F8 +#define SDHCI_ARASAN_OTAPDLY_REGISTER 0xF0FC +#define SDHCI_ITAPDLY_CHGWIN 0x200 +#define SDHCI_ITAPDLY_ENABLE 0x100 +#define SDHCI_OTAPDLY_ENABLE 0x40 + #define SDHCI_TUNING_LOOP_COUNT 40 #define MMC_BANK2 0x2 @@ -40,11 +46,15 @@ struct arasan_sdhci_priv { u8 no_1p8; }; -#if defined(CONFIG_ARCH_ZYNQMP) +#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL) /* Default settings for ZynqMP Clock Phases */ const u32 zynqmp_iclk_phases[] = {0, 63, 63, 0, 63, 0, 0, 183, 54, 0, 0}; const u32 zynqmp_oclk_phases[] = {0, 72, 60, 0, 60, 72, 135, 48, 72, 135, 0}; +/* Default settings for Versal Clock Phases */ +const u32 versal_iclk_phases[] = {0, 132, 132, 0, 132, 0, 0, 162, 90, 0, 0}; +const u32 versal_oclk_phases[] = {0, 60, 48, 0, 48, 72, 90, 36, 60, 90, 0}; + static const u8 mode2timing[] = { [MMC_LEGACY] = MMC_TIMING_LEGACY, [MMC_HS] = MMC_TIMING_MMC_HS, @@ -278,6 +288,138 @@ static int sdhci_zynqmp_sampleclk_set_phase(struct sdhci_host *host, return ret; } +/** + * sdhci_versal_sdcardclk_set_phase - Set the SD Output Clock Tap Delays + * + * Set the SD Output Clock Tap Delays for Output path + * + * @host: Pointer to the sdhci_host structure. + * @degrees: The clock phase shift between 0 - 359. + * Return: 0 on success and error value on error + */ +static int sdhci_versal_sdcardclk_set_phase(struct sdhci_host *host, + int degrees) +{ + struct mmc *mmc = (struct mmc *)host->mmc; + u8 tap_delay, tap_max = 0; + int ret; + int timing = mode2timing[mmc->selected_mode]; + + /* + * This is applicable for SDHCI_SPEC_300 and above + * Versal does not set phase for <=25MHz clock. + * If degrees is zero, no need to do anything. + */ + if (host->version < SDHCI_SPEC_300 || + timing == MMC_TIMING_LEGACY || + timing == MMC_TIMING_UHS_SDR12 || !degrees) + return 0; + + switch (timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 30 Taps are available */ + tap_max = 30; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 15 Taps are available */ + tap_max = 15; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 8 Taps are available */ + tap_max = 8; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + if (tap_delay) { + u32 regval; + + regval = sdhci_readl(host, SDHCI_ARASAN_OTAPDLY_REGISTER); + regval |= SDHCI_OTAPDLY_ENABLE; + sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER); + regval |= tap_delay; + sdhci_writel(host, regval, SDHCI_ARASAN_OTAPDLY_REGISTER); + } + + return ret; +} + +/** + * sdhci_versal_sampleclk_set_phase - Set the SD Input Clock Tap Delays + * + * Set the SD Input Clock Tap Delays for Input path + * + * @host: Pointer to the sdhci_host structure. + * @degrees: The clock phase shift between 0 - 359. + * Return: 0 on success and error value on error + */ +static int sdhci_versal_sampleclk_set_phase(struct sdhci_host *host, + int degrees) +{ + struct mmc *mmc = (struct mmc *)host->mmc; + u8 tap_delay, tap_max = 0; + int ret; + int timing = mode2timing[mmc->selected_mode]; + + /* + * This is applicable for SDHCI_SPEC_300 and above + * Versal does not set phase for <=25MHz clock. + * If degrees is zero, no need to do anything. + */ + if (host->version < SDHCI_SPEC_300 || + timing == MMC_TIMING_LEGACY || + timing == MMC_TIMING_UHS_SDR12 || !degrees) + return 0; + + switch (timing) { + case MMC_TIMING_MMC_HS: + case MMC_TIMING_SD_HS: + case MMC_TIMING_UHS_SDR25: + case MMC_TIMING_UHS_DDR50: + case MMC_TIMING_MMC_DDR52: + /* For 50MHz clock, 120 Taps are available */ + tap_max = 120; + break; + case MMC_TIMING_UHS_SDR50: + /* For 100MHz clock, 60 Taps are available */ + tap_max = 60; + break; + case MMC_TIMING_UHS_SDR104: + case MMC_TIMING_MMC_HS200: + /* For 200MHz clock, 30 Taps are available */ + tap_max = 30; + default: + break; + } + + tap_delay = (degrees * tap_max) / 360; + + /* Set the Clock Phase */ + if (tap_delay) { + u32 regval; + + regval = sdhci_readl(host, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval |= SDHCI_ITAPDLY_CHGWIN; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval |= SDHCI_ITAPDLY_ENABLE; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval |= tap_delay; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + regval &= ~SDHCI_ITAPDLY_CHGWIN; + sdhci_writel(host, regval, SDHCI_ARASAN_ITAPDLY_REGISTER); + } + + return ret; +} + static void arasan_sdhci_set_tapdelay(struct sdhci_host *host) { struct arasan_sdhci_priv *priv = dev_get_priv(host->mmc->dev); @@ -294,6 +436,10 @@ static void arasan_sdhci_set_tapdelay(struct sdhci_host *host) device_is_compatible(dev, "xlnx,zynqmp-8.9a")) { sdhci_zynqmp_sampleclk_set_phase(host, iclk_phase); sdhci_zynqmp_sdcardclk_set_phase(host, oclk_phase); + } else if (IS_ENABLED(CONFIG_ARCH_VERSAL) && + device_is_compatible(dev, "xlnx,versal-8.9a")) { + sdhci_versal_sampleclk_set_phase(host, iclk_phase); + sdhci_versal_sdcardclk_set_phase(host, oclk_phase); } } @@ -346,6 +492,14 @@ static void arasan_dt_parse_clk_phases(struct udevice *dev) } } + if (IS_ENABLED(CONFIG_ARCH_VERSAL) && + device_is_compatible(dev, "xlnx,versal-8.9a")) { + for (i = 0; i <= MMC_TIMING_MMC_HS400; i++) { + clk_data->clk_phase_in[i] = versal_iclk_phases[i]; + clk_data->clk_phase_out[i] = versal_oclk_phases[i]; + } + } + arasan_dt_read_clk_phase(dev, MMC_TIMING_LEGACY, "clk-phase-legacy"); arasan_dt_read_clk_phase(dev, MMC_TIMING_MMC_HS, @@ -388,9 +542,7 @@ static void arasan_sdhci_set_control_reg(struct sdhci_host *host) mmc->selected_mode <= UHS_DDR50) sdhci_set_uhs_timing(host); } -#endif -#if defined(CONFIG_ARCH_ZYNQMP) const struct sdhci_ops arasan_ops = { .platform_execute_tuning = &arasan_sdhci_execute_tuning, .set_delay = &arasan_sdhci_set_tapdelay, @@ -471,7 +623,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) priv->host->name = dev->name; -#if defined(CONFIG_ARCH_ZYNQMP) +#if defined(CONFIG_ARCH_ZYNQMP) || defined(CONFIG_ARCH_VERSAL) priv->host->ops = &arasan_ops; arasan_dt_parse_clk_phases(dev); #endif