From patchwork Wed Feb 26 10:34:18 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Michal Simek X-Patchwork-Id: 236855 List-Id: U-Boot discussion From: michal.simek at xilinx.com (Michal Simek) Date: Wed, 26 Feb 2020 11:34:18 +0100 Subject: [PATCH] ARM: zynq: Do not include full zynq-7000.dtsi to cse-nor configuration Message-ID: <5e15c7b3dcc7255cfedf9c0fc0e99d7e8c811a70.1582713253.git.michal.simek@xilinx.com> There is no real need to include full DT when only some nodes are enough to use. It will save some space. Retested with FSBL for initial SoC setup. SPL didn't work. Signed-off-by: Michal Simek --- arch/arm/dts/zynq-cse-nor.dts | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/arch/arm/dts/zynq-cse-nor.dts b/arch/arm/dts/zynq-cse-nor.dts index 9710abadcf02..4030851eb36d 100644 --- a/arch/arm/dts/zynq-cse-nor.dts +++ b/arch/arm/dts/zynq-cse-nor.dts @@ -5,7 +5,6 @@ * Copyright (C) 2018 Xilinx, Inc. */ /dts-v1/; -#include "zynq-7000.dtsi" / { #address-cells = <1>; @@ -33,27 +32,21 @@ }; amba: amba { + u-boot,dm-pre-reloc; compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&intc>; ranges; - intc: interrupt-controller at f8f01000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xF8F01000 0x1000>, - <0xF8F00100 0x100>; - }; - slcr: slcr at f8000000 { + u-boot,dm-pre-reloc; #address-cells = <1>; #size-cells = <1>; compatible = "xlnx,zynq-slcr", "syscon", "simple-bus"; reg = <0xF8000000 0x1000>; ranges; clkc: clkc at 100 { + u-boot,dm-pre-reloc; #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; clock-output-names = "armpll", "ddrpll",