From patchwork Fri Jan 31 13:08:02 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Ian Ray X-Patchwork-Id: 240512 List-Id: U-Boot discussion From: ian.ray at ge.com (Ian Ray) Date: Fri, 31 Jan 2020 15:08:02 +0200 Subject: [U-Boot, 11/13] board: ge: mx53ppd: use DM for uart In-Reply-To: References: Message-ID: <20a1b416c9da275215486dafa7914e528ba4827e.1580475104.git.ian.ray@ge.com> Drop PPD_UART_PAD_CTRL since it matches defaults. Enable DM serial and MXC uart. Signed-off-by: Ian Ray Signed-off-by: Robert Beckett --- board/ge/mx53ppd/mx53ppd.c | 3 --- board/ge/mx53ppd/ppd_gpio.h | 6 ------ configs/mx53ppd_defconfig | 3 +++ include/configs/mx53ppd.h | 9 +-------- 4 files changed, 4 insertions(+), 17 deletions(-) diff --git a/board/ge/mx53ppd/mx53ppd.c b/board/ge/mx53ppd/mx53ppd.c index bdf0691..f8320ff 100644 --- a/board/ge/mx53ppd/mx53ppd.c +++ b/board/ge/mx53ppd/mx53ppd.c @@ -85,9 +85,6 @@ u32 get_board_rev(void) return get_cpu_rev() & ~(0xF << 8); } -#define UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP | PAD_CTL_ODE) - #ifdef CONFIG_USB_EHCI_MX5 int board_ehci_hcd_init(int port) { diff --git a/board/ge/mx53ppd/ppd_gpio.h b/board/ge/mx53ppd/ppd_gpio.h index 163782a..98c41d4 100644 --- a/board/ge/mx53ppd/ppd_gpio.h +++ b/board/ge/mx53ppd/ppd_gpio.h @@ -9,15 +9,9 @@ #include #include -#define PPD_UART_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_DSE_HIGH | \ - PAD_CTL_PUS_100K_UP) - static const iomux_v3_cfg_t ppd_pads[] = { /* FEC */ MX53_PAD_EIM_A22__GPIO2_16, - /* UART */ - NEW_PAD_CTRL(MX53_PAD_PATA_DMACK__UART1_RXD_MUX, PPD_UART_PAD_CTRL), - NEW_PAD_CTRL(MX53_PAD_PATA_DIOW__UART1_TXD_MUX, PPD_UART_PAD_CTRL), /* Video */ MX53_PAD_CSI0_DATA_EN__GPIO5_20, /* LR_SCAN_CTRL */ MX53_PAD_CSI0_VSYNC__GPIO5_21, /* UD_SCAN_CTRL */ diff --git a/configs/mx53ppd_defconfig b/configs/mx53ppd_defconfig index 3a208f4..8a3bda5 100644 --- a/configs/mx53ppd_defconfig +++ b/configs/mx53ppd_defconfig @@ -60,6 +60,9 @@ CONFIG_DM_REGULATOR_FIXED=y CONFIG_PWM_IMX=y CONFIG_DM_RTC=y CONFIG_RTC_S35392A=y +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set +CONFIG_DM_SERIAL=y +CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SYSRESET_WATCHDOG=y CONFIG_USB=y diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index 97d566d..a4452b8 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -11,8 +11,6 @@ #include -#define CONSOLE_DEV "ttymxc0" - #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_INITRD_TAG @@ -25,9 +23,6 @@ #define CONFIG_BOARD_LATE_INIT #define CONFIG_REVISION_TAG -#define CONFIG_MXC_UART -#define CONFIG_MXC_UART_BASE UART1_BASE - /* USB Configs */ #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX @@ -70,11 +65,9 @@ "devnum=2\0" \ "rootdev=mmcblk0p\0" \ "quiet=quiet loglevel=0\0" \ - "console=" CONSOLE_DEV "\0" \ "lvds=ldb\0" \ "setargs=setenv bootargs ${lvds} jtag=on mem=2G " \ - "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \ - "console=${console}\0" \ + "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \ "bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \ "rootwait ${bootargs}\0" \ "doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \