diff mbox series

[v4,2/7] apq8016: Add support for UART1 clocks and pinmux

Message ID 20240412095438.410570-3-sumit.garg@linaro.org
State Accepted
Commit 6e992a6bc85ce40a9b24924db52ce90c9efc3005
Headers show
Series Add SE HMBSC board support | expand

Commit Message

Sumit Garg April 12, 2024, 9:54 a.m. UTC 
SE HMIBSC board uses UART1 as the main debug console, so add
corresponding clocks and pinmux support. Along with that update
instructions to enable clocks for debug UART support.

Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
---
 drivers/clk/qcom/clock-apq8016.c       | 38 ++++++++++++++++++--------
 drivers/pinctrl/qcom/pinctrl-apq8016.c |  1 +
 drivers/serial/serial_msm.c            | 11 ++++++--
 3 files changed, 35 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c
index 5a5868169c8..9556b94774a 100644
--- a/drivers/clk/qcom/clock-apq8016.c
+++ b/drivers/clk/qcom/clock-apq8016.c
@@ -31,7 +31,8 @@ 
 #define BLSP1_AHB_CBCR			0x1008
 
 /* Uart clock control registers */
-#define BLSP1_UART2_BCR			(0x3028)
+#define BLSP1_UART1_APPS_CBCR		(0x203C)
+#define BLSP1_UART1_APPS_CMD_RCGR	(0x2044)
 #define BLSP1_UART2_APPS_CBCR		(0x302C)
 #define BLSP1_UART2_APPS_CMD_RCGR	(0x3034)
 
@@ -52,7 +53,7 @@  static struct vote_clk gcc_blsp1_ahb_clk = {
 };
 
 /* SDHCI */
-static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
+static int apq8016_clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
 {
 	int div = 15; /* 100MHz default */
 
@@ -70,20 +71,35 @@  static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
 }
 
 /* UART: 115200 */
-int apq8016_clk_init_uart(phys_addr_t base)
+int apq8016_clk_init_uart(phys_addr_t base, unsigned long id)
 {
+	u32 cmd_rcgr, apps_cbcr;
+
+	switch (id) {
+	case GCC_BLSP1_UART1_APPS_CLK:
+		cmd_rcgr = BLSP1_UART1_APPS_CMD_RCGR;
+		apps_cbcr = BLSP1_UART1_APPS_CBCR;
+		break;
+	case GCC_BLSP1_UART2_APPS_CLK:
+		cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR;
+		apps_cbcr = BLSP1_UART2_APPS_CBCR;
+		break;
+	default:
+		return 0;
+	}
+
 	/* Enable AHB clock */
 	clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk);
 
 	/* 7372800 uart block clock @ GPLL0 */
-	clk_rcg_set_rate_mnd(base, BLSP1_UART2_APPS_CMD_RCGR, 1, 144, 15625,
-			     CFG_CLK_SRC_GPLL0, 16);
+	clk_rcg_set_rate_mnd(base, cmd_rcgr, 1, 144, 15625, CFG_CLK_SRC_GPLL0,
+			     16);
 
 	/* Vote for gpll0 clock */
 	clk_enable_gpll0(base, &gpll0_vote_clk);
 
 	/* Enable core clk */
-	clk_enable_cbc(base + BLSP1_UART2_APPS_CBCR);
+	clk_enable_cbc(base + apps_cbcr);
 
 	return 0;
 }
@@ -94,14 +110,12 @@  static ulong apq8016_clk_set_rate(struct clk *clk, ulong rate)
 
 	switch (clk->id) {
 	case GCC_SDCC1_APPS_CLK: /* SDC1 */
-		return clk_init_sdc(priv, 0, rate);
-		break;
+		return apq8016_clk_init_sdc(priv, 0, rate);
 	case GCC_SDCC2_APPS_CLK: /* SDC2 */
-		return clk_init_sdc(priv, 1, rate);
-		break;
+		return apq8016_clk_init_sdc(priv, 1, rate);
+	case GCC_BLSP1_UART1_APPS_CLK: /* UART1 */
 	case GCC_BLSP1_UART2_APPS_CLK: /* UART2 */
-		return apq8016_clk_init_uart(priv->base);
-		break;
+		return apq8016_clk_init_uart(priv->base, clk->id);
 	default:
 		return 0;
 	}
diff --git a/drivers/pinctrl/qcom/pinctrl-apq8016.c b/drivers/pinctrl/qcom/pinctrl-apq8016.c
index a9a00f4b081..1ee8b7db1a2 100644
--- a/drivers/pinctrl/qcom/pinctrl-apq8016.c
+++ b/drivers/pinctrl/qcom/pinctrl-apq8016.c
@@ -29,6 +29,7 @@  static const char * const msm_pinctrl_pins[] = {
 };
 
 static const struct pinctrl_function msm_pinctrl_functions[] = {
+	{"blsp_uart1", 2},
 	{"blsp_uart2", 2},
 };
 
diff --git a/drivers/serial/serial_msm.c b/drivers/serial/serial_msm.c
index ac4280c6c4c..4de10e75191 100644
--- a/drivers/serial/serial_msm.c
+++ b/drivers/serial/serial_msm.c
@@ -248,12 +248,17 @@  static struct msm_serial_data init_serial_data = {
 #include <debug_uart.h>
 
 /* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */
-//int apq8016_clk_init_uart(phys_addr_t gcc_base);
+//int apq8016_clk_init_uart(phys_addr_t gcc_base, unsigned long id);
 
 static inline void _debug_uart_init(void)
 {
-	/* Uncomment to turn on UART clocks when debugging U-Boot as aboot on MSM8916 */
-	//apq8016_clk_init_uart(0x1800000);
+	/*
+	 * Uncomment to turn on UART clocks when debugging U-Boot as aboot
+	 * on MSM8916. Supported debug UART clock IDs:
+	 *   - db410c: GCC_BLSP1_UART2_APPS_CLK
+	 *   - HMIBSC: GCC_BLSP1_UART1_APPS_CLK
+	 */
+	//apq8016_clk_init_uart(0x1800000, <uart_clk_id>);
 	uart_dm_init(&init_serial_data);
 }