From patchwork Tue Mar 19 12:22:04 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Caleb Connolly X-Patchwork-Id: 781087 Delivered-To: patch@linaro.org Received: by 2002:a5d:46c1:0:b0:33e:7753:30bd with SMTP id g1csp1896021wrs; Tue, 19 Mar 2024 05:23:32 -0700 (PDT) X-Forwarded-Encrypted: i=2; AJvYcCUU2Ds/sAwHH+8S4G53/ykMaC1Ea5IfeqVgdv065OjwjJ6wjjdHS0rS7CehAEMQTHKtb+/7cKcVQl9/K03YHRRZ X-Google-Smtp-Source: AGHT+IHRQnQYIpfp4YrnUufbkckqL44ni7g4/sjjYl2MzduARo4XCVq+k4Axpo8ggSJMzln7Sk2v X-Received: by 2002:a5d:4fc5:0:b0:33e:c974:1296 with SMTP id h5-20020a5d4fc5000000b0033ec9741296mr2136032wrw.25.1710851012391; Tue, 19 Mar 2024 05:23:32 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1710851012; cv=none; d=google.com; s=arc-20160816; b=bnnCKHvLKtiSZBI3IH5JLfOOIhsXRdnhhAtN4/F5AikmqCAWBCizUiqMJEkfY8y5lO +AxB9pyUW48Y1RyM5+tz7u3QVPFXXSz0Nf886Y3fdRYb0cge3Mlcm7uRQnXqoCyyXNen 2+96/KcdKseGy/SO+0ScaDLjG3kjZ3zC8brwkkhkjPOFLc/ziNW5lLwOlPZRHaNz1alb Fhxkw9pWZTUYVxfeO1/8MfTxA11azkLPq6ozUnXTiM5EDKmRqW6UltrjNoNw9zT7LqnN I1P+smQyuvs2TuWp/4tyLwKnLSYHRJ7gbxI08XwMpN9tuvBfDqNQWhxzOlLB8XmqX8uO CdBg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=sender:errors-to:list-subscribe:list-help:list-post:list-archive :list-unsubscribe:list-id:precedence:cc:to:in-reply-to:references :message-id:content-transfer-encoding:mime-version:subject:date:from :dkim-signature; bh=2tIybXB4/i8K8imQRbJFN4tQmiI9WOy924+pDsC6PPI=; fh=gSVpyLKtvZ+QePPYgVwr0OwBuSQ/slJGUurC/y9msiw=; b=bZVsqiMjxsqFZeTwwEn9MV9gnD7hHtxsjHm9zw3IKobMEDmP5Hk2Gvc58fJ3j7w5Uf Hr2Jj7ZaZzwsrwAxhRAaHhOFq6BTCFUeuRmeHxOLJYN47yY0wt+4xGeeCK3xizGl4BkM gMxyBRlZ0nMwWsU9svhmZEfT0s7qU4RiqYrQmIOoCXFzFknyh/WOQ13rFJVMavL7i1sh 163cc60vg8MUgsRv81wlZTxCBD01ME5sUq5E1GYvjWRrr6/nNOu8pY8NfhO973Nn/5s8 YC5K0Sujnl12Df0KfLP2B6+6YIjYanC9NKFyOM5PeIcO4yIKz1KiBpYYvnaViXmNF8C2 83cA==; dara=google.com ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=TjYDJdVE; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from phobos.denx.de (phobos.denx.de. [2a01:238:438b:c500:173d:9f52:ddab:ee01]) by mx.google.com with ESMTPS id k14-20020adff28e000000b0033ecaf55976si5639209wro.688.2024.03.19.05.23.31 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Mar 2024 05:23:32 -0700 (PDT) Received-SPF: pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) client-ip=2a01:238:438b:c500:173d:9f52:ddab:ee01; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=TjYDJdVE; spf=pass (google.com: domain of u-boot-bounces@lists.denx.de designates 2a01:238:438b:c500:173d:9f52:ddab:ee01 as permitted sender) smtp.mailfrom=u-boot-bounces@lists.denx.de; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: from h2850616.stratoserver.net (localhost [IPv6:::1]) by phobos.denx.de (Postfix) with ESMTP id B090D88095; Tue, 19 Mar 2024 13:22:47 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=u-boot-bounces@lists.denx.de Authentication-Results: phobos.denx.de; dkim=pass (2048-bit key; unprotected) header.d=linaro.org header.i=@linaro.org header.b="TjYDJdVE"; dkim-atps=neutral Received: by phobos.denx.de (Postfix, from userid 109) id 2445387F3F; Tue, 19 Mar 2024 13:22:46 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on phobos.denx.de X-Spam-Level: X-Spam-Status: No, score=-2.1 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,SPF_HELO_NONE,SPF_PASS, T_SCC_BODY_TEXT_LINE autolearn=unavailable autolearn_force=no version=3.4.2 Received: from mail-wm1-x32c.google.com (mail-wm1-x32c.google.com [IPv6:2a00:1450:4864:20::32c]) (using TLSv1.3 with cipher TLS_AES_128_GCM_SHA256 (128/128 bits)) (No client certificate requested) by phobos.denx.de (Postfix) with ESMTPS id 2237788065 for ; Tue, 19 Mar 2024 13:22:42 +0100 (CET) Authentication-Results: phobos.denx.de; dmarc=pass (p=none dis=none) header.from=linaro.org Authentication-Results: phobos.denx.de; spf=pass smtp.mailfrom=caleb.connolly@linaro.org Received: by mail-wm1-x32c.google.com with SMTP id 5b1f17b1804b1-41413c99748so12882695e9.0 for ; Tue, 19 Mar 2024 05:22:42 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1710850961; x=1711455761; darn=lists.denx.de; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=2tIybXB4/i8K8imQRbJFN4tQmiI9WOy924+pDsC6PPI=; b=TjYDJdVEnBzFjY2Ar6t3iAwQMZ4JMUBNo+csDEEdbNKktbPuS3n+QlNGRimFD7xpM5 umySy0cm+WB/bEtPE13D8ddryCI9nwXIrYUxffeQH1Amf2y65I6YiGOu1Bl1vxP3iemD APOKkzppgIoUlr0InFZXzYLLtl5jbFUcHfAixSsJnGDrO3nSELqdVME3twVyfRXL4iwG 2jPI0nB/4Aeo126/pc2dXp/Wl6Zro8vEh0cXTl8RkaAUkZcJ4Z+CT8KnOZihvztCye2n TAeY8maQZFv10EnNDysQ4L4XtxJHkdcFu8dB582V1JW5zgs0fZRyJctOjR8bC79wRKas 6Ipw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1710850961; x=1711455761; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=2tIybXB4/i8K8imQRbJFN4tQmiI9WOy924+pDsC6PPI=; b=P2kJCTqTm2jxJyPaj0c4b6I6r9aX1lE2C8Xt8IiA1QNzdGIYBeMaf8Wf/EFHUNsseq xoXgmcvcnk30TR7eLaD3Eid3ejrq3uleBfntZ0u2TjW+O5jTDWNTTEymGWVVASco/lOk J1scjuwRBvbgn6Q5ls/h4TBPXeBFUrAkX7E46QGSlJIBscMhshDu28LTvTo3uHHzHEPl R4rXyy3ERf0GtvTC7+Bk1zxE8fBG312u3i6anzMpulbrOJRK4UZbCB8XbyWQLhKj+iTX jUGWEemxWJmh+wYroIqiXGeScvtPOO4QjCBYfFHExzG/G1FanDf/qTeJH45MBamx1pgk du1g== X-Gm-Message-State: AOJu0YzdReUMBp5Qceyg+d3h302mYDNnQj0qt9w9vjfiidSHK8DHfStS Wz0dG1Mfueyplp16z+JqzILrB/BMUQ361iGSi6Qy3RL8muPSEq8ex/VEojklWNTrFSgYr30qOkn c X-Received: by 2002:adf:eb43:0:b0:33d:27d4:2fec with SMTP id u3-20020adfeb43000000b0033d27d42fecmr1375358wrn.35.1710850961193; Tue, 19 Mar 2024 05:22:41 -0700 (PDT) Received: from lion.localdomain (host-92-17-96-232.as13285.net. [92.17.96.232]) by smtp.gmail.com with ESMTPSA id du18-20020a0560000d5200b0033b7ce8b496sm12170498wrb.108.2024.03.19.05.22.40 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 19 Mar 2024 05:22:40 -0700 (PDT) From: Caleb Connolly Date: Tue, 19 Mar 2024 12:22:04 +0000 Subject: [PATCH v3 05/14] clk/qcom: use offsets for RCG registers MIME-Version: 1.0 Message-Id: <20240319-b4-qcom-livetree-v3-5-e1b38d9b4fa4@linaro.org> References: <20240319-b4-qcom-livetree-v3-0-e1b38d9b4fa4@linaro.org> In-Reply-To: <20240319-b4-qcom-livetree-v3-0-e1b38d9b4fa4@linaro.org> To: Tom Rini , Caleb Connolly , Neil Armstrong , Sumit Garg , Lukasz Majewski , Sean Anderson Cc: u-boot@lists.denx.de X-Mailer: b4 0.14-dev X-Developer-Signature: v=1; a=openpgp-sha256; l=21410; i=caleb.connolly@linaro.org; h=from:subject:message-id; bh=+L98HdRBA9FLvBdzgwBiyByDFkebZAkL+nfO+eax76o=; b=owGbwMvMwCFYaeA6f6eBkTjjabUkhtSfzZ3OmyOqPuxb1segzO8Rzizn584XaF6Y7CR/2Tjrb oyspFNHKQuDIAeDrJgii/iJZZZNay/ba2xfcAFmDisTyBAGLk4BmEi9OiPDTIvW3o+bNzckGWyc ODFZ+fvBAon5+0rulvhkbSv5o1tmyfBXKOO32s2OP/J5saIbHTkXfpqd0iD7kPHdqwKhi1pPnrF eAgA= X-Developer-Key: i=caleb.connolly@linaro.org; a=openpgp; fpr=83B24DA7FE145076BC38BB250CD904EB673A7C47 X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.39 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: u-boot-bounces@lists.denx.de Sender: "U-Boot" X-Virus-Scanned: clamav-milter 0.103.8 at phobos.denx.de X-Virus-Status: Clean The RCG registers always have the same offsets, so only store the base CMD register address and calculate the others relative to that. Signed-off-by: Caleb Connolly Reviewed-by: Sumit Garg --- drivers/clk/qcom/clock-apq8016.c | 39 +------------ drivers/clk/qcom/clock-apq8096.c | 28 +-------- drivers/clk/qcom/clock-qcom.c | 22 +++---- drivers/clk/qcom/clock-qcom.h | 16 +++--- drivers/clk/qcom/clock-qcs404.c | 121 +++++---------------------------------- drivers/clk/qcom/clock-sdm845.c | 16 +----- 6 files changed, 39 insertions(+), 203 deletions(-) diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index e6647f7c41dd..5a5868169c89 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -22,13 +22,9 @@ #define APCS_GPLL_ENA_VOTE (0x45000) #define APCS_CLOCK_BRANCH_ENA_VOTE (0x45004) #define SDCC_BCR(n) ((n * 0x1000) + 0x41000) -#define SDCC_CMD_RCGR(n) ((n * 0x1000) + 0x41004) -#define SDCC_CFG_RCGR(n) ((n * 0x1000) + 0x41008) -#define SDCC_M(n) ((n * 0x1000) + 0x4100C) -#define SDCC_N(n) ((n * 0x1000) + 0x41010) -#define SDCC_D(n) ((n * 0x1000) + 0x41014) +#define SDCC_CMD_RCGR(n) (((n + 1) * 0x1000) + 0x41004) #define SDCC_APPS_CBCR(n) ((n * 0x1000) + 0x41018) #define SDCC_AHB_CBCR(n) ((n * 0x1000) + 0x4101C) /* BLSP1 AHB clock (root clock for BLSP) */ @@ -37,33 +33,12 @@ /* Uart clock control registers */ #define BLSP1_UART2_BCR (0x3028) #define BLSP1_UART2_APPS_CBCR (0x302C) #define BLSP1_UART2_APPS_CMD_RCGR (0x3034) -#define BLSP1_UART2_APPS_CFG_RCGR (0x3038) -#define BLSP1_UART2_APPS_M (0x303C) -#define BLSP1_UART2_APPS_N (0x3040) -#define BLSP1_UART2_APPS_D (0x3044) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(17) -static const struct bcr_regs sdc_regs[] = { - { - .cfg_rcgr = SDCC_CFG_RCGR(1), - .cmd_rcgr = SDCC_CMD_RCGR(1), - .M = SDCC_M(1), - .N = SDCC_N(1), - .D = SDCC_D(1), - }, - { - .cfg_rcgr = SDCC_CFG_RCGR(2), - .cmd_rcgr = SDCC_CMD_RCGR(2), - .M = SDCC_M(2), - .N = SDCC_N(2), - .D = SDCC_D(2), - } -}; - static struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, @@ -85,32 +60,24 @@ static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate) div = 4; clk_enable_cbc(priv->base + SDCC_AHB_CBCR(slot)); /* 800Mhz/div, gpll0 */ - clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(slot), div, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot)); return rate; } -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR, - .M = BLSP1_UART2_APPS_M, - .N = BLSP1_UART2_APPS_N, - .D = BLSP1_UART2_APPS_D, -}; - /* UART: 115200 */ int apq8016_clk_init_uart(phys_addr_t base) { /* Enable AHB clock */ clk_enable_vote_clk(base, &gcc_blsp1_ahb_clk); /* 7372800 uart block clock @ GPLL0 */ - clk_rcg_set_rate_mnd(base, &uart2_regs, 1, 144, 15625, + clk_rcg_set_rate_mnd(base, BLSP1_UART2_APPS_CMD_RCGR, 1, 144, 15625, CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ clk_enable_gpll0(base, &gpll0_vote_clk); diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c index a4731613c5e0..479f9771a464 100644 --- a/drivers/clk/qcom/clock-apq8096.c +++ b/drivers/clk/qcom/clock-apq8096.c @@ -25,33 +25,17 @@ #define SDCC2_BCR (0x14000) /* block reset */ #define SDCC2_APPS_CBCR (0x14004) /* branch control */ #define SDCC2_AHB_CBCR (0x14008) #define SDCC2_CMD_RCGR (0x14010) -#define SDCC2_CFG_RCGR (0x14014) -#define SDCC2_M (0x14018) -#define SDCC2_N (0x1401C) -#define SDCC2_D (0x14020) #define BLSP2_AHB_CBCR (0x25004) #define BLSP2_UART2_APPS_CBCR (0x29004) #define BLSP2_UART2_APPS_CMD_RCGR (0x2900C) -#define BLSP2_UART2_APPS_CFG_RCGR (0x29010) -#define BLSP2_UART2_APPS_M (0x29014) -#define BLSP2_UART2_APPS_N (0x29018) -#define BLSP2_UART2_APPS_D (0x2901C) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(30) #define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0) -static const struct bcr_regs sdc_regs = { - .cfg_rcgr = SDCC2_CFG_RCGR, - .cmd_rcgr = SDCC2_CMD_RCGR, - .M = SDCC2_M, - .N = SDCC2_N, - .D = SDCC2_D, -}; - static const struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, @@ -68,31 +52,23 @@ static int clk_init_sdc(struct msm_clk_priv *priv, uint rate) { int div = 5; clk_enable_cbc(priv->base + SDCC2_AHB_CBCR); - clk_rcg_set_rate_mnd(priv->base, &sdc_regs, div, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC2_CMD_RCGR, div, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC2_APPS_CBCR); return rate; } -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP2_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP2_UART2_APPS_CMD_RCGR, - .M = BLSP2_UART2_APPS_M, - .N = BLSP2_UART2_APPS_N, - .D = BLSP2_UART2_APPS_D, -}; - static int clk_init_uart(struct msm_clk_priv *priv) { /* Enable AHB clock */ clk_enable_vote_clk(priv->base, &gcc_blsp2_ahb_clk); /* 7372800 uart block clock @ GPLL0 */ - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 192, 15625, + clk_rcg_set_rate_mnd(priv->base, BLSP2_UART2_APPS_CMD_RCGR, 1, 192, 15625, CFG_CLK_SRC_GPLL0, 16); /* Vote for gpll0 clock */ clk_enable_gpll0(priv->base, &gpll0_vote_clk); diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c index 6303dcbf8461..05e5ab7d094b 100644 --- a/drivers/clk/qcom/clock-qcom.c +++ b/drivers/clk/qcom/clock-qcom.c @@ -103,9 +103,9 @@ void clk_bcr_update(phys_addr_t apps_cmd_rcgr) /* * root set rate for clocks with half integer and MND divider * div should be pre-calculated ((div * 2) - 1) */ -void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, +void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr, int div, int m, int n, int source, u8 mnd_width) { u32 cfg; /* M value for MND divider. */ @@ -119,14 +119,14 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, debug("m %#x n %#x d %#x div %#x mask %#x\n", m_val, n_val, d_val, div, mask); /* Program MND values */ - writel(m_val & mask, base + regs->M); - writel(n_val & mask, base + regs->N); - writel(d_val & mask, base + regs->D); + writel(m_val & mask, base + cmd_rcgr + RCG_M_REG); + writel(n_val & mask, base + cmd_rcgr + RCG_N_REG); + writel(d_val & mask, base + cmd_rcgr + RCG_D_REG); /* setup src select and divider */ - cfg = readl(base + regs->cfg_rcgr); + cfg = readl(base + cmd_rcgr + RCG_CFG_REG); cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK | CFG_SRC_DIV_MASK); cfg |= source & CFG_SRC_SEL_MASK; /* Select clock source */ @@ -135,22 +135,22 @@ void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, if (n && n != m) cfg |= CFG_MODE_DUAL_EDGE; - writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ + writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */ /* Inform h/w to start using the new config. */ - clk_bcr_update(base + regs->cmd_rcgr); + clk_bcr_update(base + cmd_rcgr); } /* root set rate for clocks with half integer and mnd_width=0 */ -void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, +void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div, int source) { u32 cfg; /* setup src select and divider */ - cfg = readl(base + regs->cfg_rcgr); + cfg = readl(base + cmd_rcgr + RCG_CFG_REG); cfg &= ~(CFG_SRC_SEL_MASK | CFG_MODE_MASK | CFG_HW_CLK_CTRL_MASK); cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */ /* @@ -159,12 +159,12 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, */ if (div) cfg |= (2 * div - 1) & CFG_SRC_DIV_MASK; - writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */ + writel(cfg, base + cmd_rcgr + RCG_CFG_REG); /* Write new clock configuration */ /* Inform h/w to start using the new config. */ - clk_bcr_update(base + regs->cmd_rcgr); + clk_bcr_update(base + cmd_rcgr); } const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate) { diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index 12a1eaec2b2e..a7f833a4b6dd 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -11,8 +11,13 @@ #define CFG_CLK_SRC_GPLL0 (1 << 8) #define CFG_CLK_SRC_GPLL0_EVEN (6 << 8) #define CFG_CLK_SRC_MASK (7 << 8) +#define RCG_CFG_REG 0x4 +#define RCG_M_REG 0x8 +#define RCG_N_REG 0xc +#define RCG_D_REG 0x10 + struct pll_vote_clk { uintptr_t status; int status_bit; uintptr_t ena_vote; @@ -23,15 +28,8 @@ struct vote_clk { uintptr_t cbcr_reg; uintptr_t ena_vote; int vote_bit; }; -struct bcr_regs { - uintptr_t cfg_rcgr; - uintptr_t cmd_rcgr; - uintptr_t M; - uintptr_t N; - uintptr_t D; -}; struct freq_tbl { uint freq; uint src; @@ -87,11 +85,11 @@ void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0); void clk_bcr_update(phys_addr_t apps_cmd_rgcr); void clk_enable_cbc(phys_addr_t cbcr); void clk_enable_vote_clk(phys_addr_t base, const struct vote_clk *vclk); const struct freq_tbl *qcom_find_freq(const struct freq_tbl *f, uint rate); -void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs, +void clk_rcg_set_rate_mnd(phys_addr_t base, uint32_t cmd_rcgr, int div, int m, int n, int source, u8 mnd_width); -void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, +void clk_rcg_set_rate(phys_addr_t base, uint32_t cmd_rcgr, int div, int source); static inline void qcom_gate_clk_en(const struct msm_clk_priv *priv, unsigned long id) { diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c index 958312b88842..64a0a2d36754 100644 --- a/drivers/clk/qcom/clock-qcs404.c +++ b/drivers/clk/qcom/clock-qcs404.c @@ -27,37 +27,24 @@ /* Uart clock control registers */ #define BLSP1_UART2_BCR (0x3028) #define BLSP1_UART2_APPS_CBCR (0x302C) #define BLSP1_UART2_APPS_CMD_RCGR (0x3034) -#define BLSP1_UART2_APPS_CFG_RCGR (0x3038) -#define BLSP1_UART2_APPS_M (0x303C) -#define BLSP1_UART2_APPS_N (0x3040) -#define BLSP1_UART2_APPS_D (0x3044) /* I2C controller clock control registerss */ #define BLSP1_QUP0_I2C_APPS_CBCR (0x6028) #define BLSP1_QUP0_I2C_APPS_CMD_RCGR (0x602C) -#define BLSP1_QUP0_I2C_APPS_CFG_RCGR (0x6030) #define BLSP1_QUP1_I2C_APPS_CBCR (0x2008) #define BLSP1_QUP1_I2C_APPS_CMD_RCGR (0x200C) -#define BLSP1_QUP1_I2C_APPS_CFG_RCGR (0x2010) #define BLSP1_QUP2_I2C_APPS_CBCR (0x3010) #define BLSP1_QUP2_I2C_APPS_CMD_RCGR (0x3000) -#define BLSP1_QUP2_I2C_APPS_CFG_RCGR (0x3004) #define BLSP1_QUP3_I2C_APPS_CBCR (0x4020) #define BLSP1_QUP3_I2C_APPS_CMD_RCGR (0x4000) -#define BLSP1_QUP3_I2C_APPS_CFG_RCGR (0x4004) #define BLSP1_QUP4_I2C_APPS_CBCR (0x5020) #define BLSP1_QUP4_I2C_APPS_CMD_RCGR (0x5000) -#define BLSP1_QUP4_I2C_APPS_CFG_RCGR (0x5004) /* SD controller clock control registers */ #define SDCC_BCR(n) (((n) * 0x1000) + 0x41000) -#define SDCC_CMD_RCGR(n) (((n) * 0x1000) + 0x41004) -#define SDCC_CFG_RCGR(n) (((n) * 0x1000) + 0x41008) -#define SDCC_M(n) (((n) * 0x1000) + 0x4100C) -#define SDCC_N(n) (((n) * 0x1000) + 0x41010) -#define SDCC_D(n) (((n) * 0x1000) + 0x41014) +#define SDCC_CMD_RCGR(n) (((n + 1) * 0x1000) + 0x41004) #define SDCC_APPS_CBCR(n) (((n) * 0x1000) + 0x41018) #define SDCC_AHB_CBCR(n) (((n) * 0x1000) + 0x4101C) /* USB-3.0 controller clock control registers */ @@ -69,12 +56,8 @@ #define USB30_MOCK_UTMI_CBCR (0x39014) #define USB30_MOCK_UTMI_CMD_RCGR (0x3901C) #define USB30_MOCK_UTMI_CFG_RCGR (0x39020) #define USB30_MASTER_CMD_RCGR (0x39028) -#define USB30_MASTER_CFG_RCGR (0x3902C) -#define USB30_MASTER_M (0x39030) -#define USB30_MASTER_N (0x39034) -#define USB30_MASTER_D (0x39038) #define USB2A_PHY_SLEEP_CBCR (0x4102C) #define USB_HS_PHY_CFG_AHB_CBCR (0x41030) /* ETH controller clock control registers */ @@ -84,12 +67,8 @@ #define ETH_AXI_CBCR (0x4e010) #define EMAC_PTP_CMD_RCGR (0x4e014) #define EMAC_PTP_CFG_RCGR (0x4e018) #define EMAC_CMD_RCGR (0x4e01c) -#define EMAC_CFG_RCGR (0x4e020) -#define EMAC_M (0x4e024) -#define EMAC_N (0x4e028) -#define EMAC_D (0x4e02c) /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(31) @@ -102,24 +81,8 @@ static struct vote_clk gcc_blsp1_ahb_clk = { .ena_vote = APCS_CLOCK_BRANCH_ENA_VOTE, .vote_bit = BIT(10) | BIT(5) | BIT(4), }; -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = BLSP1_UART2_APPS_CFG_RCGR, - .cmd_rcgr = BLSP1_UART2_APPS_CMD_RCGR, - .M = BLSP1_UART2_APPS_M, - .N = BLSP1_UART2_APPS_N, - .D = BLSP1_UART2_APPS_D, -}; - -static const struct bcr_regs sdc_regs = { - .cfg_rcgr = SDCC_CFG_RCGR(1), - .cmd_rcgr = SDCC_CMD_RCGR(1), - .M = SDCC_M(1), - .N = SDCC_N(1), - .D = SDCC_D(1), -}; - static struct pll_vote_clk gpll0_vote_clk = { .status = GPLL0_STATUS, .status_bit = GPLL0_STATUS_ACTIVE, .ena_vote = APCS_GPLL_ENA_VOTE, @@ -132,92 +95,38 @@ static struct pll_vote_clk gpll1_vote_clk = { .ena_vote = APCS_GPLL_ENA_VOTE, .vote_bit = BIT(1), }; -static const struct bcr_regs usb30_master_regs = { - .cfg_rcgr = USB30_MASTER_CFG_RCGR, - .cmd_rcgr = USB30_MASTER_CMD_RCGR, - .M = USB30_MASTER_M, - .N = USB30_MASTER_N, - .D = USB30_MASTER_D, -}; - -static const struct bcr_regs emac_regs = { - .cfg_rcgr = EMAC_CFG_RCGR, - .cmd_rcgr = EMAC_CMD_RCGR, - .M = EMAC_M, - .N = EMAC_N, - .D = EMAC_D, -}; - -static const struct bcr_regs emac_ptp_regs = { - .cfg_rcgr = EMAC_PTP_CFG_RCGR, - .cmd_rcgr = EMAC_PTP_CMD_RCGR, - .M = EMAC_M, - .N = EMAC_N, - .D = EMAC_D, -}; - -static const struct bcr_regs blsp1_qup0_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP0_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP0_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup1_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP1_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP1_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup2_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP2_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP2_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup3_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP3_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP3_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - -static const struct bcr_regs blsp1_qup4_i2c_apps_regs = { - .cmd_rcgr = BLSP1_QUP4_I2C_APPS_CMD_RCGR, - .cfg_rcgr = BLSP1_QUP4_I2C_APPS_CFG_RCGR, - /* mnd_width = 0 */ -}; - static ulong qcs404_clk_set_rate(struct clk *clk, ulong rate) { struct msm_clk_priv *priv = dev_get_priv(clk->dev); switch (clk->id) { case GCC_BLSP1_UART2_APPS_CLK: /* UART: 1843200Hz for a fixed 115200 baudrate (19200000 * (12/125)) */ - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 0, 12, 125, + clk_rcg_set_rate_mnd(priv->base, BLSP1_UART2_APPS_CMD_RCGR, 0, 12, 125, CFG_CLK_SRC_CXO, 16); clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR); return 1843200; case GCC_SDCC1_APPS_CLK: /* SDCC1: 200MHz */ - clk_rcg_set_rate_mnd(priv->base, &sdc_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, SDCC_CMD_RCGR(0), 7, 0, 0, CFG_CLK_SRC_GPLL0, 8); clk_enable_gpll0(priv->base, &gpll0_vote_clk); clk_enable_cbc(priv->base + SDCC_APPS_CBCR(1)); return rate; case GCC_ETH_RGMII_CLK: if (rate == 250000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 125000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 7, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 50000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 19, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 19, 0, 0, CFG_CLK_SRC_GPLL1, 8); else if (rate == 5000000) - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 1, 50, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 1, 50, CFG_CLK_SRC_GPLL1, 8); return rate; } @@ -236,9 +145,9 @@ static int qcs404_clk_enable(struct clk *clk) switch (clk->id) { case GCC_USB30_MASTER_CLK: clk_enable_cbc(priv->base + USB30_MASTER_CBCR); - clk_rcg_set_rate_mnd(priv->base, &usb30_master_regs, 7, 0, 0, + clk_rcg_set_rate_mnd(priv->base, USB30_MASTER_CMD_RCGR, 7, 0, 0, CFG_CLK_SRC_GPLL0, 8); break; case GCC_SYS_NOC_USB3_CLK: clk_enable_cbc(priv->base + SYS_NOC_USB3_CBCR); @@ -258,16 +167,16 @@ static int qcs404_clk_enable(struct clk *clk) case GCC_ETH_PTP_CLK: /* SPEED_1000: freq -> 250MHz */ clk_enable_cbc(priv->base + ETH_PTP_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); - clk_rcg_set_rate_mnd(priv->base, &emac_ptp_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_PTP_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_RGMII_CLK: /* SPEED_1000: freq -> 250MHz */ clk_enable_cbc(priv->base + ETH_RGMII_CBCR); clk_enable_gpll0(priv->base, &gpll1_vote_clk); - clk_rcg_set_rate_mnd(priv->base, &emac_regs, 3, 0, 0, + clk_rcg_set_rate_mnd(priv->base, EMAC_CMD_RCGR, 3, 0, 0, CFG_CLK_SRC_GPLL1, 8); break; case GCC_ETH_SLAVE_AHB_CLK: clk_enable_cbc(priv->base + ETH_SLAVE_AHB_CBCR); @@ -279,29 +188,29 @@ static int qcs404_clk_enable(struct clk *clk) clk_enable_vote_clk(priv->base, &gcc_blsp1_ahb_clk); break; case GCC_BLSP1_QUP0_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP0_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup0_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP0_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP1_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP1_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup1_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP1_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP2_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP2_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup2_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP2_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP3_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP3_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup3_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP3_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_BLSP1_QUP4_I2C_APPS_CLK: clk_enable_cbc(priv->base + BLSP1_QUP4_I2C_APPS_CBCR); - clk_rcg_set_rate(priv->base, &blsp1_qup4_i2c_apps_regs, 0, + clk_rcg_set_rate(priv->base, BLSP1_QUP4_I2C_APPS_CMD_RCGR, 0, CFG_CLK_SRC_CXO); break; case GCC_SDCC1_AHB_CLK: clk_enable_cbc(priv->base + SDCC_AHB_CBCR(1)); diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index babd83119e2c..ccb0cf245d33 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -18,15 +18,9 @@ #include #include "clock-qcom.h" -#define SE9_AHB_CBCR 0x25004 -#define SE9_UART_APPS_CBCR 0x29004 #define SE9_UART_APPS_CMD_RCGR 0x18148 -#define SE9_UART_APPS_CFG_RCGR 0x1814C -#define SE9_UART_APPS_M 0x18150 -#define SE9_UART_APPS_N 0x18154 -#define SE9_UART_APPS_D 0x18158 static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(7372800, CFG_CLK_SRC_GPLL0_EVEN, 1, 384, 15625), F(14745600, CFG_CLK_SRC_GPLL0_EVEN, 1, 768, 15625), @@ -45,25 +39,17 @@ static const struct freq_tbl ftbl_gcc_qupv3_wrap0_s0_clk_src[] = { F(128000000, CFG_CLK_SRC_GPLL0, 1, 16, 75), { } }; -static const struct bcr_regs uart2_regs = { - .cfg_rcgr = SE9_UART_APPS_CFG_RCGR, - .cmd_rcgr = SE9_UART_APPS_CMD_RCGR, - .M = SE9_UART_APPS_M, - .N = SE9_UART_APPS_N, - .D = SE9_UART_APPS_D, -}; - static ulong sdm845_clk_set_rate(struct clk *clk, ulong rate) { struct msm_clk_priv *priv = dev_get_priv(clk->dev); const struct freq_tbl *freq; switch (clk->id) { case GCC_QUPV3_WRAP1_S1_CLK: /* UART9 */ freq = qcom_find_freq(ftbl_gcc_qupv3_wrap0_s0_clk_src, rate); - clk_rcg_set_rate_mnd(priv->base, &uart2_regs, + clk_rcg_set_rate_mnd(priv->base, SE9_UART_APPS_CMD_RCGR, freq->pre_div, freq->m, freq->n, freq->src, 16); return freq->freq; default: return 0;