| Message ID | 20240319-b4-qcom-livetree-v3-14-e1b38d9b4fa4@linaro.org |
|---|---|
| State | New |
| Headers | show |
| Series | Qualcomm platform USB support | expand |
On Tue, 19 Mar 2024 at 17:52, Caleb Connolly <caleb.connolly@linaro.org> wrote: > > Enable support for the DWC3 USB controller and required dependencies for > Qualcomm boards, specifically the DB845c: > * IOMMU / SMMU > * USB high-speed PHYs > * Mass storage and ACM gadgets > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > configs/qcom_defconfig | 49 ++++++++++++++++++++++++++----------------------- > 1 file changed, 26 insertions(+), 23 deletions(-) > > diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig > index eebd0d74bd51..156c205284dd 100644 > --- a/configs/qcom_defconfig > +++ b/configs/qcom_defconfig > @@ -12,42 +12,63 @@ CONFIG_BOOTSTD_FULL=y > CONFIG_BOOTDELAY=1 > CONFIG_USE_PREBOOT=y > CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y > CONFIG_SYS_CBSIZE=512 > +# CONFIG_SYS_DEVICE_NULLDEV is not set > CONFIG_LOG_MAX_LEVEL=9 > CONFIG_LOG_DEFAULT_LEVEL=4 > # CONFIG_DISPLAY_CPUINFO is not set > CONFIG_DISPLAY_BOARDINFO_LATE=y > CONFIG_CMD_BOOTMENU=y > +CONFIG_CMD_EEPROM=y > +CONFIG_SYS_I2C_EEPROM_BUS=2 > +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > +# CONFIG_CMD_BIND is not set > CONFIG_CMD_CLK=y > CONFIG_CMD_GPIO=y > +CONFIG_CMD_I2C=y > CONFIG_CMD_MMC=y > CONFIG_CMD_UFS=y > CONFIG_CMD_USB=y > CONFIG_CMD_CAT=y > CONFIG_CMD_BMP=y > CONFIG_CMD_LOG=y > CONFIG_OF_LIVE=y > # CONFIG_NET is not set > +CONFIG_DM_WARN=y > # CONFIG_OFNODE_MULTI_TREE is not set > CONFIG_BUTTON_QCOM_PMIC=y > CONFIG_CLK=y > CONFIG_CLK_QCOM_QCS404=y > CONFIG_CLK_QCOM_SDM845=y > CONFIG_MSM_GPIO=y > CONFIG_QCOM_PMIC_GPIO=y > +CONFIG_DM_I2C=y > +CONFIG_SYS_I2C_QUP=y > +CONFIG_I2C_MUX=y > CONFIG_DM_KEYBOARD=y > CONFIG_BUTTON_KEYBOARD=y > +CONFIG_IOMMU=y > +CONFIG_QCOM_HYP_SMMU=y > +CONFIG_MISC=y > +CONFIG_NVMEM=y > +CONFIG_I2C_EEPROM=y > CONFIG_MMC_HS200_SUPPORT=y > CONFIG_MMC_SDHCI=y > CONFIG_MMC_SDHCI_ADMA=y > CONFIG_MMC_SDHCI_MSM=y > +CONFIG_DM_ETH_PHY=y > CONFIG_PHY=y > +CONFIG_PHY_QCOM_QUSB2=y > +CONFIG_PHY_QCOM_USB_HS_7NM=y > CONFIG_PINCTRL=y > CONFIG_PINCTRL_QCOM_QCS404=y > CONFIG_PINCTRL_QCOM_SDM845=y > CONFIG_DM_PMIC=y > CONFIG_PMIC_QCOM=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > CONFIG_SCSI=y > CONFIG_MSM_SERIAL=y > CONFIG_MSM_GENI_SERIAL=y > CONFIG_SPMI_MSM=y > @@ -56,8 +77,13 @@ CONFIG_SYSINFO_SMBIOS=y > CONFIG_USB=y > CONFIG_USB_XHCI_HCD=y > CONFIG_USB_XHCI_DWC3=y > CONFIG_USB_DWC3=y > +CONFIG_USB_DWC3_GENERIC=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_USB_FUNCTION_MASS_STORAGE=y > +CONFIG_USB_FUNCTION_ACM=y > CONFIG_UFS=y > CONFIG_VIDEO=y > # CONFIG_VIDEO_FONT_8X16 is not set > CONFIG_VIDEO_FONT_16X32=y > @@ -66,27 +92,4 @@ CONFIG_NO_FB_CLEAR=y > CONFIG_VIDEO_SIMPLE=y > CONFIG_HEXDUMP=y > # CONFIG_GENERATE_SMBIOS_TABLE is not set > CONFIG_LMB_MAX_REGIONS=64 > -CONFIG_CMD_DHCP=y > -CONFIG_CMD_EEPROM=y > -CONFIG_CMD_I2C=y > -CONFIG_CMD_PING=y > -CONFIG_DM_ETH=y > -CONFIG_DM_ETH_PHY=y > -CONFIG_DM_MDIO=y > -CONFIG_DWC_ETH_QOS=y > -CONFIG_DWC_ETH_QOS_QCOM=y Any particular reason to drop these? -Sumit > -CONFIG_RGMII=y > -CONFIG_PHY_MICREL=y > -CONFIG_PHY_MICREL_KSZ90X1=y > -CONFIG_MISC=y > -CONFIG_NVMEM=y > -CONFIG_DM_I2C=y > -CONFIG_I2C_SUPPORT=y > -CONFIG_I2C_MUX=y > -CONFIG_I2C_EEPROM=y > -CONFIG_SYS_I2C=y > -CONFIG_SYS_I2C_QUP=y > -CONFIG_SYS_I2C_EEPROM_BUS=2 > -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 > -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 > > -- > 2.44.0 >
On 20/03/2024 05:40, Sumit Garg wrote: > On Tue, 19 Mar 2024 at 17:52, Caleb Connolly <caleb.connolly@linaro.org> wrote: >> >> Enable support for the DWC3 USB controller and required dependencies for >> Qualcomm boards, specifically the DB845c: >> * IOMMU / SMMU >> * USB high-speed PHYs >> * Mass storage and ACM gadgets >> >> Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> >> --- >> configs/qcom_defconfig | 49 ++++++++++++++++++++++++++----------------------- >> 1 file changed, 26 insertions(+), 23 deletions(-) >> >> diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig >> index eebd0d74bd51..156c205284dd 100644 >> --- a/configs/qcom_defconfig >> +++ b/configs/qcom_defconfig >> @@ -12,42 +12,63 @@ CONFIG_BOOTSTD_FULL=y >> CONFIG_BOOTDELAY=1 >> CONFIG_USE_PREBOOT=y >> CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y >> CONFIG_SYS_CBSIZE=512 >> +# CONFIG_SYS_DEVICE_NULLDEV is not set >> CONFIG_LOG_MAX_LEVEL=9 >> CONFIG_LOG_DEFAULT_LEVEL=4 >> # CONFIG_DISPLAY_CPUINFO is not set >> CONFIG_DISPLAY_BOARDINFO_LATE=y >> CONFIG_CMD_BOOTMENU=y >> +CONFIG_CMD_EEPROM=y >> +CONFIG_SYS_I2C_EEPROM_BUS=2 >> +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 >> +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 >> +# CONFIG_CMD_BIND is not set >> CONFIG_CMD_CLK=y >> CONFIG_CMD_GPIO=y >> +CONFIG_CMD_I2C=y >> CONFIG_CMD_MMC=y >> CONFIG_CMD_UFS=y >> CONFIG_CMD_USB=y >> CONFIG_CMD_CAT=y >> CONFIG_CMD_BMP=y >> CONFIG_CMD_LOG=y >> CONFIG_OF_LIVE=y >> # CONFIG_NET is not set >> +CONFIG_DM_WARN=y >> # CONFIG_OFNODE_MULTI_TREE is not set >> CONFIG_BUTTON_QCOM_PMIC=y >> CONFIG_CLK=y >> CONFIG_CLK_QCOM_QCS404=y >> CONFIG_CLK_QCOM_SDM845=y >> CONFIG_MSM_GPIO=y >> CONFIG_QCOM_PMIC_GPIO=y >> +CONFIG_DM_I2C=y >> +CONFIG_SYS_I2C_QUP=y >> +CONFIG_I2C_MUX=y >> CONFIG_DM_KEYBOARD=y >> CONFIG_BUTTON_KEYBOARD=y >> +CONFIG_IOMMU=y >> +CONFIG_QCOM_HYP_SMMU=y >> +CONFIG_MISC=y >> +CONFIG_NVMEM=y >> +CONFIG_I2C_EEPROM=y >> CONFIG_MMC_HS200_SUPPORT=y >> CONFIG_MMC_SDHCI=y >> CONFIG_MMC_SDHCI_ADMA=y >> CONFIG_MMC_SDHCI_MSM=y >> +CONFIG_DM_ETH_PHY=y >> CONFIG_PHY=y >> +CONFIG_PHY_QCOM_QUSB2=y >> +CONFIG_PHY_QCOM_USB_HS_7NM=y >> CONFIG_PINCTRL=y >> CONFIG_PINCTRL_QCOM_QCS404=y >> CONFIG_PINCTRL_QCOM_SDM845=y >> CONFIG_DM_PMIC=y >> CONFIG_PMIC_QCOM=y >> +CONFIG_DM_REGULATOR=y >> +CONFIG_DM_REGULATOR_FIXED=y >> CONFIG_SCSI=y >> CONFIG_MSM_SERIAL=y >> CONFIG_MSM_GENI_SERIAL=y >> CONFIG_SPMI_MSM=y >> @@ -56,8 +77,13 @@ CONFIG_SYSINFO_SMBIOS=y >> CONFIG_USB=y >> CONFIG_USB_XHCI_HCD=y >> CONFIG_USB_XHCI_DWC3=y >> CONFIG_USB_DWC3=y >> +CONFIG_USB_DWC3_GENERIC=y >> +CONFIG_USB_GADGET=y >> +CONFIG_USB_GADGET_DOWNLOAD=y >> +CONFIG_USB_FUNCTION_MASS_STORAGE=y >> +CONFIG_USB_FUNCTION_ACM=y >> CONFIG_UFS=y >> CONFIG_VIDEO=y >> # CONFIG_VIDEO_FONT_8X16 is not set >> CONFIG_VIDEO_FONT_16X32=y >> @@ -66,27 +92,4 @@ CONFIG_NO_FB_CLEAR=y >> CONFIG_VIDEO_SIMPLE=y >> CONFIG_HEXDUMP=y >> # CONFIG_GENERATE_SMBIOS_TABLE is not set >> CONFIG_LMB_MAX_REGIONS=64 >> -CONFIG_CMD_DHCP=y >> -CONFIG_CMD_EEPROM=y >> -CONFIG_CMD_I2C=y >> -CONFIG_CMD_PING=y >> -CONFIG_DM_ETH=y >> -CONFIG_DM_ETH_PHY=y >> -CONFIG_DM_MDIO=y >> -CONFIG_DWC_ETH_QOS=y >> -CONFIG_DWC_ETH_QOS_QCOM=y > > Any particular reason to drop these? No, this is weird, I must have screwed something up while regenerating the defconfig. Thanks for catching this, I'll fix it for the next revision. > > -Sumit > >> -CONFIG_RGMII=y >> -CONFIG_PHY_MICREL=y >> -CONFIG_PHY_MICREL_KSZ90X1=y >> -CONFIG_MISC=y >> -CONFIG_NVMEM=y >> -CONFIG_DM_I2C=y >> -CONFIG_I2C_SUPPORT=y >> -CONFIG_I2C_MUX=y >> -CONFIG_I2C_EEPROM=y >> -CONFIG_SYS_I2C=y >> -CONFIG_SYS_I2C_QUP=y >> -CONFIG_SYS_I2C_EEPROM_BUS=2 >> -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 >> -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 >> >> -- >> 2.44.0 >>
diff --git a/configs/qcom_defconfig b/configs/qcom_defconfig index eebd0d74bd51..156c205284dd 100644 --- a/configs/qcom_defconfig +++ b/configs/qcom_defconfig @@ -12,42 +12,63 @@ CONFIG_BOOTSTD_FULL=y CONFIG_BOOTDELAY=1 CONFIG_USE_PREBOOT=y CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y CONFIG_SYS_CBSIZE=512 +# CONFIG_SYS_DEVICE_NULLDEV is not set CONFIG_LOG_MAX_LEVEL=9 CONFIG_LOG_DEFAULT_LEVEL=4 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_CMD_BOOTMENU=y +CONFIG_CMD_EEPROM=y +CONFIG_SYS_I2C_EEPROM_BUS=2 +CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 +CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5 +# CONFIG_CMD_BIND is not set CONFIG_CMD_CLK=y CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_UFS=y CONFIG_CMD_USB=y CONFIG_CMD_CAT=y CONFIG_CMD_BMP=y CONFIG_CMD_LOG=y CONFIG_OF_LIVE=y # CONFIG_NET is not set +CONFIG_DM_WARN=y # CONFIG_OFNODE_MULTI_TREE is not set CONFIG_BUTTON_QCOM_PMIC=y CONFIG_CLK=y CONFIG_CLK_QCOM_QCS404=y CONFIG_CLK_QCOM_SDM845=y CONFIG_MSM_GPIO=y CONFIG_QCOM_PMIC_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_QUP=y +CONFIG_I2C_MUX=y CONFIG_DM_KEYBOARD=y CONFIG_BUTTON_KEYBOARD=y +CONFIG_IOMMU=y +CONFIG_QCOM_HYP_SMMU=y +CONFIG_MISC=y +CONFIG_NVMEM=y +CONFIG_I2C_EEPROM=y CONFIG_MMC_HS200_SUPPORT=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ADMA=y CONFIG_MMC_SDHCI_MSM=y +CONFIG_DM_ETH_PHY=y CONFIG_PHY=y +CONFIG_PHY_QCOM_QUSB2=y +CONFIG_PHY_QCOM_USB_HS_7NM=y CONFIG_PINCTRL=y CONFIG_PINCTRL_QCOM_QCS404=y CONFIG_PINCTRL_QCOM_SDM845=y CONFIG_DM_PMIC=y CONFIG_PMIC_QCOM=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y CONFIG_SCSI=y CONFIG_MSM_SERIAL=y CONFIG_MSM_GENI_SERIAL=y CONFIG_SPMI_MSM=y @@ -56,8 +77,13 @@ CONFIG_SYSINFO_SMBIOS=y CONFIG_USB=y CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_MASS_STORAGE=y +CONFIG_USB_FUNCTION_ACM=y CONFIG_UFS=y CONFIG_VIDEO=y # CONFIG_VIDEO_FONT_8X16 is not set CONFIG_VIDEO_FONT_16X32=y @@ -66,27 +92,4 @@ CONFIG_NO_FB_CLEAR=y CONFIG_VIDEO_SIMPLE=y CONFIG_HEXDUMP=y # CONFIG_GENERATE_SMBIOS_TABLE is not set CONFIG_LMB_MAX_REGIONS=64 -CONFIG_CMD_DHCP=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_PING=y -CONFIG_DM_ETH=y -CONFIG_DM_ETH_PHY=y -CONFIG_DM_MDIO=y -CONFIG_DWC_ETH_QOS=y -CONFIG_DWC_ETH_QOS_QCOM=y -CONFIG_RGMII=y -CONFIG_PHY_MICREL=y -CONFIG_PHY_MICREL_KSZ90X1=y -CONFIG_MISC=y -CONFIG_NVMEM=y -CONFIG_DM_I2C=y -CONFIG_I2C_SUPPORT=y -CONFIG_I2C_MUX=y -CONFIG_I2C_EEPROM=y -CONFIG_SYS_I2C=y -CONFIG_SYS_I2C_QUP=y -CONFIG_SYS_I2C_EEPROM_BUS=2 -CONFIG_SYS_I2C_EEPROM_ADDR_LEN=2 -CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=5
Enable support for the DWC3 USB controller and required dependencies for Qualcomm boards, specifically the DB845c: * IOMMU / SMMU * USB high-speed PHYs * Mass storage and ACM gadgets Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- configs/qcom_defconfig | 49 ++++++++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 23 deletions(-)